Related
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Bambam01 said:
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Click to expand...
Click to collapse
I recommend just writing an image file with winimage. Then writing it to a 8gb card, then using Easeus Partition manager to expand the last partition to full 8 gb.'
Do you boot from the SD card or eMMC?
If it's the latter, just copy the contents of the old card to the new one.
If it's the former, I recommend a fresh install; use a backup program (MyBackup, Titanium Backup) to back up your Apps and Data and then restore when you're done with the fresh install.
I'd like to do this as well.. in response to previous reply.. there are 4 partitions (boot, 2 other and last one with your data) do I have to create 4 different images with winimage or just for the first boot partition or does the winimage creates the image of the whole msd card?
The winimage will create a 4 gb image of your card on the 8 gb cards including existing partitions. What you'll need to do is get the largest partition to expand to the whole card. Assuming that the 4gb install on SD is the same as an 8 gb install if you did it fresh.
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Phatdawg said:
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Click to expand...
Click to collapse
That's a good point, the Size-agnostic SD installer uses different partition sizes for everything except the boot partition depending on the size of the card.
I tried winimage first to see if it even worked. Which it didn't. I didn't try to expand the existing partition. It just booted as a normal nook. You would think this would be a easy process but.... Lol, always new challenges. Guess that's why I enjoy doing this.
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Bambam01 said:
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Click to expand...
Click to collapse
I have done this several times, and I recommend downloading easus todo backup free. Then place both sdcards in a card reader, run todo backup and just copy the 4g to the 8g and expand the fourth partition right there in todo.
This applies especially if you want to copy to same size sd's, as you will not run into the usual image sizing issues.
Hope this helps
I don't know what you're doing wrong. before expanding the partition, make sure the sd boots, if it doesn't, then there's a problem with image being read or written as opposed to the partition.
I also had a problem with a new SD card not booting that I fixed by using the nook (that is the core nook OS) to reformat the card, then put the image onto the SDcard (shouldn't have changed anything as far as I know, but it did anyway).
Ok I tried this and it worked flawlessly. Used win32diskimager to "read" my 4gb sd with cm7 image. and then used "write" to 8gb sd card. It cloned 4 gb original image with 4 partitions and one unused partition of 4 gb. After that used easeus partition manager(latest version) to format unused pattition to fat32 and then merged with last partition of 2gb (move/resize) ..so now I have 6 gb of data partition which i can use to transfer files or move apps from nook's internal drive. The new 8gb card with cm7 image booted without any issues keeping my original settings of 4gb. One thing to mention that somehow it did not work on one pc with windows xp (kept getting write error on win32diskimager program)but worked on my laptop with windows 7.
That is exactly how I have done it in the past as I described in my first post. I don't know why a person would have trouble with it unless there was a format issue (i.e. ntsf, etc).
Just got a SanDisk microSDXC 64GB card from Amazon for my Galaxy S4. I don't want to mess anything up, so I've got a few questions.
Are these cards formatted with exFat? How can I tell? Do I need a special kernel to have it work? Will the stock kernel work?
Should I format it from within the phone before use?
Any other problems/concerns I should have before I copy all my music and ROMS over to the card?
Thanks in advance,
Foulwx...in Atlanta tonight where there really is some foul weather.
I recently purchased a 32GB SanDisk Ultra, and followed the instructions at these two links, for moving apps to the sd card:
http://forum.xda-developers.com/showthread.php?t=2142844 - mini partition tool guide
http://forum.xda-developers.com/showthread.php?t=2285221 - link2sd and foldermount
If you have some way to connect the card to your PC, the mini partition tool guide is really easy to follow. If you don't plan on moving apps to the card, you could just toss it in the phone and format it there. I screwed up the partitions a couple of times on my own (formatted the card 5 or 6 separate times, trying out different filesystems and partition sizes), before I found the mini partition tool guide, so I don't think there's much chance of permanently ruining the card.
If you formatted the card into fat32, then it would be more compatible without modifying anything on the phone.
Foulwx said:
Just got a SanDisk microSDXC 64GB card from Amazon for my Galaxy S4. I don't want to mess anything up, so I've got a few questions.
Are these cards formatted with exFat? How can I tell? Do I need a special kernel to have it work? Will the stock kernel work?
Should I format it from within the phone before use?
Any other problems/concerns I should have before I copy all my music and ROMS over to the card?
Thanks in advance,
Foulwx...in Atlanta tonight where there really is some foul weather.
Click to expand...
Click to collapse
You can connect the microSD to your PC to determine what format it currently is. If you stick in the phone, it'll format to exFat. The exFat format can be recognized by the stock kernel as well as the agat kernel and the ktoonsez kernel.
I have the same one. Just put it in my phone and went from there. Guess it auto formats it to exfat that way.
I flashed bluKuban and had to switch to agats kernel to see it. But otherwise works well.
Sent from my SPH-L720 using xda premium
Is there an advantage to exFat over FAT32?
flu13 said:
Is there an advantage to exFat over FAT32?
Click to expand...
Click to collapse
exFat can have files over 4gb.
I killed my sandisk 32gb ultra card ...created the fat 32 partition and then the exfat and it won't be ready by the phone at all. When I put it into the computer it shows it only has 30.6 MB...I'm unable to format it through windows or with another app. Any help would be appreciated
majid25 said:
I killed my sandisk 32gb ultra card ...created the fat 32 partition and then the exfat and it won't be ready by the phone at all. When I put it into the computer it shows it only has 30.6 MB...I'm unable to format it through windows or with another app. Any help would be appreciated
Click to expand...
Click to collapse
Insert it into your phone, and format it there. That "may" fix it for you.
jj14 said:
Insert it into your phone, and format it there. That "may" fix it for you.
Click to expand...
Click to collapse
Its not being read by the phone it doesn't even mount..
I'd try plugging it into the computer and running a partitioning program. It should see the card no matter what. Partition it to whatever format you want.
oscarthegrouch said:
I'd try plugging it into the computer and running a partitioning program. It should see the card no matter what. Partition it to whatever format you want.
Click to expand...
Click to collapse
Theres one computer where it sees it and I connect it through an HP printer that had an SD slot.. Windows shows it as 30.6MB and asks me to format it but the format fails. I tried SD card formatter, HP USB disk tool..I don't know what to do
OK, I loaded all my music, pictures, and roms onto my 64SDCard from my laptop. Windows says it is exFat. Booted and seems to work fine.
Then I went into OUDhs recovery to try and make a nandroid. It can't mount the external_sd. Suggestions? Do I need a different recovery or kernel? I'm on the stock kernel.
Thanks again.
Edit: I installed TWRP 2.5.0.3 and it worked fine, I think. I haven't tried a restore yet.
I finally gave up with exFat and, after some research here on XDA, used Mini Tool Partition Wizard Home Edition to format my SDCard to fat32. I just made a Nandroid with OUDhs recovery. Hopefully, everything will continue to work OK and I don't need any 4GB files on my card.
Like alot of you, I recently had alot of trouble with my sandisk 64gb micro sd card. this fix is pretty easy but it worked for me! so check it out:
you need two programs: SD formatter( can be found on the sandisk website) and easeus partiton master( you can use any program that lets you format partitions)
you will also need the sd card adapter to put you micro in, and an sd card reader
Step 1: connect your sandisk 64gb microsd card to the computer with the adapter it came with in the box. My laptop has the sd card reader built in
I dont think it will work unless you connect it this way.
Step 2: open sd formatter, it should have recognized your card if not click refresh. after its recognized click Options and set format type to full (overwrite) format the sd card. this will take a long while so you might wanna go watch tv or something?
step 3 : after its done formatting open partition master and right click on the sd card and format it to fat32. your going to have to click apply on the top right hand corner for it to work
you should be set. DONT FORMAT IN THE ANDRIOD SETTINGS. for some reason when ever i fixed the micro and tried formatting it in my phone it would mess up everything thing again.
I keep a 32 gb in my s4 now and use my 64 in my note 10.1 because i need the space there more. Let me know if this works for you!
britoskates said:
Like alot of you, I recently had alot of trouble with my sandisk 64gb micro sd card. this fix is pretty easy but it worked for me! so check it out:
you need two programs: SD formatter( can be found on the sandisk website) and easeus partiton master( you can use any program that lets you format partitions)
you will also need the sd card adapter to put you micro in, and an sd card reader
Step 1: connect your sandisk 64gb microsd card to the computer with the adapter it came with in the box. My laptop has the sd card reader built in
I dont think it will work unless you connect it this way.
Step 2: open sd formatter, it should have recognized your card if not click refresh. after its recognized click Options and set format type to full (overwrite) format the sd card. this will take a long while so you might wanna go watch tv or something?
step 3 : after its done formatting open partition master and right click on the sd card and format it to fat32. your going to have to click apply on the top right hand corner for it to work
you should be set. DONT FORMAT IN THE ANDRIOD SETTINGS. for some reason when ever i fixed the micro and tried formatting it in my phone it would mess up everything thing again.
I keep a 32 gb in my s4 now and use my 64 in my note 10.1 because i need the space there more. Let me know if this works for you!
Click to expand...
Click to collapse
It really depends on the troubles you have, most of them are some kind of incompatibility with the S4 firmware and the 64GB SD card and formating this will not help. My issue was each time i'd put music on my SD, my system status would trip to custom, also my music would not always show up at boot. This has been a recurring problem with the sandisk cards no matter how i formated it. And yes, i did use SDFormater 4.0 and still had the issue. My only solution was to get a Samsung 64GB SD and no issues since
Sometimes mine removes itself, but a media rescan or reboot fixes it. Doesn't really bother me.
I use a 64gb PNY class10 and its flawless for me.I think the issue is witg the sandisk bran.
Sent from my SAMSUNG-SGH-I337 using xda premium
Figured this is a good thread to post my experience.
I had a MicroSD card I thought was bad. What happened was I was formatting the device to ext4 at the time using a older microSD USB adapter i had. Basically, the microSD card reader died while it was in that process. Using a microSD > SDAdater and a built in SD card slot on my laptop I was unable to format the drive in Windows or MacOS. (I was formatting the device via the USB reader on my Desktop in Ubuntu). Ubuntu does not see my card reader on my laptop so I was unable to use that). I thought I killed it. It was a SanDisk microSDXC 64gb card.
So I ordered a new Samsung microSDXC and a new microSDXC USB card reader. I got them both. New card worked great. I decided to play with the card a bit. Using Ubuntu, gparted specifically, with the new adapter I could no create or modify partitions on the old microSD card. It would fail out every time, different errors for ext4, exFAT and Fat32. So. In Gparted I went to Device > Write new partition table.After I did that I would able to format the drive in Ubuntu to whatever filesystem I wanted, and the card works in the phone, mac, windows, everything.
Just a heads up to help any others with issues. Rewriting the partition table may help if somehow it gets corrupt because of some write fail,
I ve 2 64gb sandisk 10x microsd with Samsung S4 I9005 with Android 4.3. I formatted with android, also Windows 7 64bit with various types of sizes on laptop. However on laptop or on phone after writing some files and disk scanning, it gives many disk errors. I wonder if it is software or microsd hardware problems. There is no problem with 32 gb.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Found the Culprit!
Considering I encountered this write protect error TWICE with the exact same product, and after having read forums that show it's a common problem, I conclude that the problem is with either this specific SanDisk product or a particular batch of this product:
Exact product specs: SanDisk Ultra 64 GB MicroSDXC Class 10 UHS-1 Memory Card with Adapter (SDSDQU-064G-AFFP-A)
These carry a lifetime warranty. A word of advice: if you go for a replacement, ask for a different 64GB model, or try a different size of the same model (I got 2 x 32GB cards instead). If they insist on giving back the exact same model, I'd suggest you use that card anywhere except a smartphone!
Hey all. Have tried multiple MicroSd cards from different brands and I always have the same problems. It reads as corrupt, photos/music cannot be read or seen, and it happens every time. This happens whether I format it as Internal or portable. (Portable is preferred.)
My G5 Plus is rooted, and is on Android 7.0. Would appreciate some help, not having any luck with anything I do.
I'm rooted and running pure nexus and haven't had the first issue with my portable formatted 32gb card. Are you on stock rom?
My kingstone 32Gb works great on stock, check if your SDs are fake. There are several test apps to check this
If it's asking to, let the phone format the card, I don't mean internal vs portable but an actual physical reformatting of the card. Backup any data on it, let it format, restore the data and see if that helps.
My good quality SD card used on a previous phone would give me the corrupt error on some roms but not others, and other users weren't having the error with their cards that I was, so I finally just let it reformat once and haven't had the problem again on any roms or stock.
Wondering if it maybe has to do with size of card? You both are on 32gb, but I am running a 128. Thoughts?
It is very possible my card could be fake (ebay purchase), but why would it run fine in other devices? How can I check for fake? It reads as a 125GB or whatever it comes out to when formatted.
Don't know where to do just a normal format. I have formatted it as internal and portable (which I want) and the same problems always resurface.
Thank you all for helping.
TUTSnowboarder said:
Wondering if it maybe has to do with size of card? You both are on 32gb, but I am running a 128. Thoughts?
It is very possible my card could be fake (ebay purchase), but why would it run fine in other devices? How can I check for fake? It reads as a 125GB or whatever it comes out to when formatted.
Don't know where to do just a normal format. I have formatted it as internal and portable (which I want) and the same problems always resurface.
Thank you all for helping.
Click to expand...
Click to collapse
make a search over internet a generic site or in XDA a thread
They are used to flash the firmware of an old sd card (4, 8, 16 GB etc.) with a bigger one, so it will detect as a eg. 128GB but when you try to write more than 4, 8, 16 GB it fails. So i suggest to buy an original micro sd, you will pay more but it won't fail
massima said:
make a search over internet a generic site or in XDA a thread
They are used to flash the firmware of an old sd card (4, 8, 16 GB etc.) with a bigger one, so it will detect as a eg. 128GB but when you try to write more than 4, 8, 16 GB it fails. So i suggest to buy an original micro sd, you will pay more but it won't fail
Click to expand...
Click to collapse
I will order a new card and test the one I currently have. Thanks so much for the help, bummer about the fake cards.
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
I'd try a different sdcard.
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
zenful said:
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
Click to expand...
Click to collapse
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Panslothda said:
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Click to expand...
Click to collapse
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
ashyx said:
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
Click to expand...
Click to collapse
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Panslothda said:
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Click to expand...
Click to collapse
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
ashyx said:
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
Click to expand...
Click to collapse
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Panslothda said:
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Click to expand...
Click to collapse
It's best just try out another card to rule out the card.
ashyx said:
It's best just try out another card to rule out the card.
Click to expand...
Click to collapse
Welp gotta buy one first then :/
Panslothda said:
Welp gotta buy one first then :/
Click to expand...
Click to collapse
Nobody can lend one for a few minutes? Or try the card in someone else device?
Panslothda said:
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
Click to expand...
Click to collapse
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
lewmur said:
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
Click to expand...
Click to collapse
I always use Samsung EVO cards and they always work perfectly. Price per GB they are very reasonable too.
Scandisk ultra i find ok no matter what size
Sent from my SM-T585 using XDA-Developers Legacy app