Related
I just rooted my Acer iconia tab a500. I am on the official ics 4.0.3. Can anyone provide step by step guide how to install custom rom for this tablet? Also which custom rom that you recommended? I thanks
Sent from my SGH-T989 using xda premium
Please, me too. I just bought mine too and is rooted, but my cell phones were much easier than the tablets. Either that or I just don't have the patients anymore. Maybe a dummies way to install custom rooms on a500? Lol.
Sent from my A500 using xda app-developers app
fe1ixs said:
I just rooted my Acer iconia tab a500. I am on the official ics 4.0.3. Can anyone provide step by step guide how to install custom rom for this tablet? Also which custom rom that you recommended? I thanks
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
slayinu said:
Please, me too. I just bought mine too and is rooted, but my cell phones were much easier than the tablets. Either that or I just don't have the patients anymore. Maybe a dummies way to install custom rooms on a500? Lol.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Hi guys welcome to the weird and wonderful world of the acer tab!!!!
Things are very different with this device, whats 'normal' for other android devices is not 'normal' for our tab!!!!
So first of all, dont try installing cwm or a rom the 'normal-this-is-the-way-I-did--it-on-myphone', you will end up with a brick!!!
2nd, you both have working systems at present, so we'll try to keep it that way.
Open up a file explorer and navigate to this:
/sys/firmware/fuse/acer_cpuid
One of the first things that are different is this: acer_cpuid
It should look something like this:
288424344009597 - now u need to add a 'zero' to the front:
0288424344009597 - this is your cpuid, back it up in multiple places if need be, just dont ever lose it - IF anything 'goes wrong' at any time you will NEED this number to save your tab from eternal brickdom!!
3rd once you do get your 'cpuid' go to the 'sbk generator' here.
This generates your 'sbk' or secure boot key and will give you something like this:
0x93588800 0x33CE8901 0x0BED6D03 0x30737899.....
OK then, now you have your cpuid/sbk you can start thinkning about what rom you want to install on your tab.......
Read the OP(Original Post) of your desired rom. This will tell you EVERYTHING you need in order to flash it - remembering always that 'Acer' does not do things the 'normal' way!!!!!!
Most of the custom ICS/JB roms on here all require the 'patched / unlocked bootloader'... In fact, even installing a custom recovery, cwm, twrp or public recovery, for the first time....will require the BL to be 'patched' first....and yes, even flashing this is not done the 'normal' way....tho the process can be complicated there are PLENTY of guides and auto tools to make it easier for you....
The 'patched bootloader flash' will also include a 'custom recovery' too, and you can choose from 3-4 options....amazing but i'd advise to use cwm 1.7.3, until u get up and running, after that you can go crazy flashing anything you like!!
So basically there are 5 main steps to getting a custom rom installed.
1. Install the Acer Drivers and the android_sdk drivers
2. Get your cpuid and generate your 'sbk'
3. Your desired rom is on your external sd card
4. Put your tab in 'apx mode' which allows u access to download mode
5. Install the patched v8 bootloader/recovery - either manually using nvFlash or using the auto tools.
Personally I prefer the manual nvFlash method, if you get an error it will at least give you an error message...the auto tools will just get 'stuck'
Check the 'bootloader' thread OP for a guide to manual nvFlash and the patched bootloader package here
There is also a step-by-step in my sig!!!
If you want to use the auto tools then apxFlash tool, or afterOTA tool you can find both in the 'bootloader' thread. And a step by step for apxflash tool also in my sig....or this excellent one here by user jdgM3NT4L here...
please be sure to read these posts very carefully and if there is something you do not understand then please dont hesitate to ask , there are plenty on here who will help you thru the process....AND its easier to offer help at this point rather than trying to do so when you've bricked it.....
As far as roms are concerned, you cant go past 'civato's FLEX roms' very stable and no issues i'm on cm10 and havent had a problem with it.....Of course it depends on what you require but I'd start with one of the flex ones.
Most peeps here have no trouble with this process, those that do, usually try things the 'normal' way, then find out they need their cpuid/sbk to get out of trouble and of course they dont have it....this makes things most difficult.... there are a few tabs with motherboard issues that have needed to be sent to acer....other than that, he only other issue you may have are driver related, check out the cpuid thread for anything driver related and lots of other background info too....theres also a zip file there that has a mini-sdk kit, to save u downloading the full android-sdk....
i think thats all i can think of at the moment, sorry for the long post and all the caps and bold text - just trying to save you alot of unnecessary grief...
Good luck with it all and remember....in this forum things are not 'normal' :laugh::laugh:
Wow, a lot of stuff to do just to flash a from huh. Lol
Sent from my A500 using xda app-developers app
Lol, as always preparation determines the success of the final outcome....and yeah with the tab 95% of yr time and energy is spent preparing!!! The actual flashing process takes only a few minutes...
Of course u could revert to hc 3.1 where everything is 'normal' i.e. one click root, flash cwm, flash rom, done....
Gosh, even hc 3.2 was locked down and unrootable....
So in the grand scheme for us to even be able to have stable ICS roms, let alone cm10 on the a50x.is.purely down to those wonderfully clever devs we have here..who were never gonna let a.locked bl, get in their way..
OK its complex I'll admit, but stock ICS is c**p and the lives of our tabs extended past wot Acer ever thought....and guys like gersma and.blackthund3r have built auto tools to make things easier
Anyways, its.well worth the
effort and is actually alot simpler to do than it is to describe how to do it...think of.trying to explain how to ride a bike and writing all those steps out....much easier to help them thru it by just getting them on the darn thing and doing it....dontcha think??
Sent from my GT-I9300 using Tapatalk 2
Yeah, I hear ya loud and clear. I wouldn't mind goin back to stock 3.1 , I kinda liked the hc. Ohwell
Sent from my A500 using xda app-developers app
---------- Post added at 07:27 PM ---------- Previous post was at 07:21 PM ----------
But as soon as I get home on my PC I'll start trying out this method. Hopefully I don't end up with a paper weight. Lol. Thank you very much for your response on this subject.
Sent from my A500 using xda app-developers app
Well, I could give u a a d/l link for 3.1 if u really do wanna go back....but I think gersma's afterOTA tool can do it too, tho I've Neva used it for that so can't really comment....
Oh, one other thing, you'll wanna back up all yr personal stuff, music, photo's and wot not especially going from one build to another, and most of the custom ROMs require a complete wipe and format of yr data partition too before install, just so u know!!
Sent from my A500 using Tapatalk 2
Yeah ,I'll take the link, I liked it better than 4.0.3 is it an original , or a rooted
Sent from my A500 using xda app-developers app
slayinu said:
Yeah ,I'll take the link, I liked it better than 4.0.3 is it an original , or a rooted
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
its factory stock but easy to root and get cwm installed, will have to w8 till i get home 2nyt to upload....
oh there myt be one in blackthund3rs stock rom thread in dev forum...i think
Sent from my GT-I9300 using Tapatalk 2
wow dibb, thank you so much for a helpful response!! Really enlightened me about how far off I was about the update process (compared to updating phones) and yet close enough to what I had to go thru for the Viewsonic GTab.
I'm currently on stock 4.0.3 rooted for A500. I have obtained my cpuid and SBK. When I go to recovery mode, I see a droid with triangle and exclamation mark. I tried flashing twrp but I still saw the same droid. I now know that I need to flash a different bootloader with recovery included.
My question is that if I flash the new bootloader which will allow me to put a custom recovery, during that process will my current ROM be removed or wiped out? If so, what do you recommend for backing up the app in the current stock ROM? Titanium Backup? BTW, I don't have an external SD card; all I'm using is the internal 8GB
Thank you for your help!!
def need external SD , it will help out alot
Sent from my A500 using xda app-developers app
artbybart said:
wow data, thank you so much for a helpful response!! Really enlightened me about how far off I was about the update process (compared to updating phones) and yet close enough to what I had to go thru for the Viewsonic GTab.
I'm currently on stock 4.0.3 rooted for A500. I have obtained my cpuid and SBK. When I go to recovery mode, I see a droid with triangle and exclamation mark. I tried flashing twrp but I still saw the same droid. I now know that I need to flash a different bootloader with recovery included.
My question is that if I flash the new bootloader which will allow me to put a custom recovery, during that process will my current ROM be removed or wiped out? If so, what do you recommend for backing up the app in the current stock ROM? Titanium Backup? BTW, I don't have an external SD card; all I'm using is the internal 8GB
Thank you for your help!!
Click to expand...
Click to collapse
Yes u need the v8 bootloader to get a recovery installed...
Always check the original post of the rom you install for special instructions regarding bootloaders.....this applies to all custom Roms even stock pre rooted ones.
Yup TB to back up yr apps and data - dont restore immediately...make sure everything is stable first.
If u dont have an ext. SD card, the EUU method doesn't require one, and as slayinu said, it would make it easier if u had one especially for the update.zip methid
Im sorry...
I have the a500 running ota 4.0.3....well from the official app. I have it rooted and running superuser yet I downloaded the Acer recovery installer app from the market and get the recovery verified failed message when booting into any custom recovery and the dead android with the exclamation mark....I know I need a patched or an unlocked boot loader but I cannot find one I downloaded the afterota but it doesn't do anything on my computer...idk what to do the frustration is gonna make me break this thing and just go buy a newer tab running jb ....help please!
famousnerd1 said:
I have the a500 running ota 4.0.3....well from the official app. I have it rooted and running superuser yet I downloaded the Acer recovery installer app from the market and get the recovery verified failed message when booting into any custom recovery and the dead android with the exclamation mark....I know I need a patched or an unlocked boot loader but I cannot find one I downloaded the afterota but it doesn't do anything on my computer...idk what to do the frustration is gonna make me break this thing and just go buy a newer tab running job....help please!
Click to expand...
Click to collapse
Seems weird afterota "doesn't do anything"...did you install the drivers?? Did it give u yr cpuid/sbk you cannot do anything without this AND if u muck things up its the only thing that will get u unbricked? Are u using a micro USB cable? Do u have USB debug enabled?
If u go to the root guide in my sig you'll find d.load links and all the guides to help u install the v8....take special note of the boot.p file u need to rename or delete in /system....
For more info on getting yr cpuid/sbk see the cpuid guide in my SIG or the sticky in dev forum...
Sent from my GT-I9300 using Tapatalk 2
obviously..
I'm too dumb to figure this out...idk how to get my cpuid none of the ways in your "where's my cpuid"guide worked.I don't want to stay stuck on ota 4.0.3 but apparently I have to..thanks for your time and your advice,unfortunately I wasn't able to use it properly.
Well, it seems it's not just you being dumb ...
I tried the same - original OTA 4.0.3 and rooted my A500. Now tried to use the 'AfterOTA'-Tools, but getting stuck in step 3 of 4 (maybe i just need to insert a SD-Card in the Tab?).
Just got no idea, what to do now - the only thing i know is: before flashing, i need a open bootloader, but i've got no idea how to do that. The Guide linked in this posts: http://forum.xda-developers.com/showthread.php?t=1622425 is just confusing me more and more
After a reading a few times, it seems to me, that MY next step should be:
"Automated flashing tool" (STEP 5= Going into APX mode see Q&A or use A500 manager)
-1-Reboot your tablet and make sure on your tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch on.
[...]
-It will ask if you are ready (click yes if you are)
Click to expand...
Click to collapse
Is it correct, that THIS will help me to patch/open the bootloader?
Or do i just have to follow this as a next step to create a patched bootloader:
http://forum.xda-developers.com/showpost.php?p=25891744&postcount=44 ?
voodoo441 said:
Well, it seems it's not just you being dumb ...
I tried the same - original OTA 4.0.3 and rooted my A500. Now tried to use the 'AfterOTA'-Tools, but getting stuck in step 3 of 4 (maybe i just need to insert a SD-Card in the Tab?).
Just got no idea, what to do now - the only thing i know is: before flashing, i need a open bootloader, but i've got no idea how to do that. The Guide linked in this posts: http://forum.xda-developers.com/showthread.php?t=1622425 is just confusing me more and more
After a reading a few times, it seems to me, that MY next step should be:
"Automated flashing tool" (STEP 5= Going into APX mode see Q&A or use A500 manager)
Is it correct, that THIS will help me to patch/open the bootloader?
Or do i just have to follow this as a next step to create a patched bootloader:
http://forum.xda-developers.com/showpost.php?p=25891744&postcount=44 ?
Click to expand...
Click to collapse
Hi voodoo, no, neither of you are being dumb!!! It CAN be a complicated procedure, we try to make our guides 'simple' but theres ALOT that can go wrong
Yes the last link you posted will flash the patched bootloader!!!
- but basically this is what SHOULD happen
Note: The only way to get a custom ICS rom on your tab is with the v8 bootloader by skrilx_cz. This must be flashed via nvFlash/apx mode.
Note:The only way to install a custom recovery like cwm or twrp etc is with v8 bootloader.
Note: You cannot use Acer Recovery Installer unless you have the v8 installed.
Note: Rom Manager does not support our Acer Tabs...please don't use it to flash 'anything'!!
OK heres an overall view of the process:
1. Install Acer and adb/fastboot drivers
2. Retrieve your CPUID...
3. ...and use it to generate your SBK
4. Download your ICS or JB rom and copy to your sd card (internal or external)
5. Enter apx mode to begin the flash!!! or use apxFlash tool
5. Use balckthund3rs apxFlash tool and follow the instructions: hint: dump and save your bct!!!
5. If using civato's manual nvFlash method - Put your tab in apx mode and run the .bat file
5. AfterOTA Tool is only for those tabs which have OTA'ed to ICS!!!
The main issues you will have with the actual flashing process itself is a partitioning error or a bct error - and both of these are easily fixed...UNLESS your tab in one of the few with a hardware fault which only a new motherboard can remedy
Once you get the big white "PASS" on your tab, boot straight to your new custom recovery, do the FULL WIPES and flash your new rom....DONE!!!
Well ... i now used AfterOTA - but not in a virtual machine - now just natively installed on my macbook via bootcamp (windows). Worked. I now have a V8-Bootloader (the tab shows me this when iam booting it up).
Whats the next step to flash a new ROM? Iam ready to do that? Or is there any other step needed by now?
Regards, Tom
Edit:
I now just tried flashing a custom rom - so i copied the *.zip to my USB-Stick (FAT32) - because i read, i can use an USB-Stick as an micro-sd card.
Tried booting into recovery-kernel - worked for me, but the only thing i can see: a lying android with an red sign ("!").
Did i something wrong?
Oh dear....if u had a stock rom on there then its overwritten
your newly flashed recovery....you need to delete or rename
the "boot.p file" in /system..then reflash the v8...
The very next step should be to enter recovery and flash your
desired rom....
So, it now just works everything.
Used Acer Recovery-Manager to re-flash the recovery - worked fine for me.
But: i tried several 4.1 and 4.2-ROMS ... is it correct, that there's no Google Marketplace anymore on 4.1 and 4.2?
My colleague brought his stock A500 to me in a bricked condition last week.
I need a way to restore it. If I try to do a wipe it will say bootloader error if i try the recovery the droid falls down with the red sign with the exclamation mark.
This tablet has never been rooted, my colleague is not in to such things, it's lived its life with ordinary acer otas and the occational very young human (5 year old) trial wich it has survived.
He has installed all the OTAs he ever got on the tablet and this is in Sweden so it would probably be a 4.0.3 acer stock on it now.
I'm guessing it has died during a OTA or something. if i turn it on it will sit at the acer logo indefinitly.
I Bricked my A500 during a rooting atempt resulting in me needed to flash a stock rom to get it working again, but i cant find the thread i read to un-brick my A500.
Please Help!
try this http://forum.xda-developers.com/showthread.php?t=1839313
dibb_nz wrote:
try this http://forum.xda-developers.com/showthread.php?t=1839313
Click to expand...
Click to collapse
Well that thread seems to hold all i need, although i can't do a full wipe. when i do the flipswitch wipe procedure it halts with bootloader error
Im hoping to just be able to flash the stock rom from the link you gave me. Is it entirely necessary to do the wipe prior to flash? can i wipe it afterwards?
Hogbola said:
Well that thread seems to hold all i need, although i can't do a full wipe. when i do the flipswitch wipe procedure it halts with bootloader error
Im hoping to just be able to flash the stock rom from the link you gave me. Is it entirely necessary to do the wipe prior to flash? can i wipe it afterwards?
Click to expand...
Click to collapse
we're assuming the tab is full stock and currently on ICS...
and we're assuming he never tried to 'fix' his tab by flashing one thing or another...
the bootloader error worries me...what exactly does it say...
Yes the wipes are really important!! and not being able to use the button method to do so is concerning...
what happens with the Over The Air (OTA) updates is its just that...an update...it leaves all your settings/data intact. When you OTA from one build to another, like Gingerbread 3.0 to Honeycomb 3.1/2 and then to ICS 4.0 - you drag all your apps and settings with you and of course some things that work with 3.2 will not work under ICS....fjor instance, lots of folk had trouble with wifi disconnects, once they got to ICS - or they had apps force closing and other 'glitches'. This is why everyone tells you to do the wipes - as this fixes these things! In the case of stock ICS my gmail would f/c all the time no matter how many times I wiped/formatted....So for a smooth running tab - flash a custom rom!!!!!!
But getting back to you...
From that link i gave you...download the 3.1_Full.zip....its decrypted so just extract it and get the "update.zip" from it..
This "update.zip" is not an incremental "update" but the full stock rom....
once installed you'll be on GB you will need to root it with iconia root and then use acer recovery installer to flash cwm....(get these from the playstore)
do a backup or adb devices so you can get your CPUID....this is important...if anything goes wrong at any stage this is the only thing that will get you unbricked....see the cpuid link in my sig for more on this, please take the time to read it, even if it doesnt make much sense to you, read it anyway....
AFTER you have retrieved your cpuid, you can nvflash the patched bootloader/recovery pkg which means you are able to flash ICS/JB custom roms
they cannot be flashed via cwm like normal...you must use nvFlash to do it....
OR
take the OTA route to ICS...this takes a bit of time...I did it last week and it was a good 6-7 hours to go from GB to ICS
there are pre-rooted stock roms if you wanna stay stock see civato's stock rom thread for that here http://forum.xda-developers.com/showthread.php?t=1633907
official stock rom list by blackthund3r are here http://forum.xda-developers.com/showthread.php?t=1816560
civs guide to flashing the unlocked bootloader here http://forum.xda-developers.com/showthread.php?t=1622425
I am in a similar situation. Push the power button and it goes to a screen with white acer on black and stays there. Totally stock ICS, no root. I tried the update.zip thing and after automatically rebooting it says "Boot verified failed...". I don't have my cpuid, or have installed previously CWM or anything like that. I can get into APX mode. This guy here: http://forum.xda-developers.com/showthread.php?t=1751978 could only get into APX with no cpuid as well, but i don't understand all of the ubuntuu and command line stuff. I would love for someone to be able to walk a dummy like me through this mess. Thanks for any help.
if u got boot verified fail error you need nvFlash to repair that....as u know, with nvflash you need yr cpuid....wot about usbdeview? if you've never plugged yr tab into yr PC - then it won't work and the ONLY other way is Linux....
might be best to start yr own thread with a descriptive title, not just a help I'm bricked no uid, thread there are hundreds of those....the more effort u put into the title the more likely you will attract the attention of someone who can actually help...and remember you just don't need a bit of help but a blow by blow description of what to do and how....this will be very time consuming....at the very least get ubuntu installed, maybe just try a few things, anything to show you are capable of at least giving it a go yourself..
there are others who would like 2 know how to do this as well...having a specific thread of its own would be great
good luck
dibb
Sent from my GT-I9300 using Tapatalk 2
Actually, I have connected it to my PC before. Only for transferring media though. If I've done that, is the some way to retrieve my cpuid from the PC?
yup...usbdeview.zip see the bottom of the OP in the cpuid guide in my sig
Thanks alot for your help. I used usbdeview and got my cpuid. Now I should use nvflash? Know where a good step by step is for that one?
you could try the one in my sig??
dibb_nz said:
you could try the one in my sig??
Click to expand...
Click to collapse
Right. Sorry, I didn't notice that before. Thanks again for your direction.
"To install one of these roms you will need a custom recovery and to get that you must flash the patched bootloader FIRSt - once its patched you can install a recovery any old way you like"
Looking at that guide, would you please tell me what a custom recovery is and how to get one? Btw, I don't plan to do a custom ROM yet, I just want to get the damn thing working first. Was thinking of using the HC EUUs from the firmware files list. However there are two files, a .rar and a .exe listed. Which do i use?
NvigR8 said:
Right. Sorry, I didn't notice that before. Thanks again for your direction.
"To install one of these roms you will need a custom recovery and to get that you must flash the patched bootloader FIRSt - once its patched you can install a recovery any old way you like"
Looking at that guide, would you please tell me what a custom recovery is and how to get one? Btw, I don't plan to do a custom ROM yet, I just want to get the damn thing working first. Was thinking of using the HC EUUs from the firmware files list. However there are two files, a .rar and a .exe listed. Which do i use?
Click to expand...
Click to collapse
The .rar EUU is for an A500, the .exe is for the A501, which do you have?
I've got the a500. However, I decided to go with a custom ICS rom after all. I managed to put a new bootloader and custom recovery on using the a500apx flash tool. That part went fine. I flashed this rom:
Acer_AV041_A500_1.054.00_WW_GEN1-FULL-ROOT (original odex)
and that appeared to go well according to twrp, but after rebooting, it just shows the bootloader again and stops there. Not sure what i did wrong.
I renamed the rom update.zip. Should i not have done that?
well congrats for getting thru the flash process with no probs!!!
as far as renaming to update.zip that was not such a good move...hopefully things havent been screwed up too much
just go back into recovery and do a FULL wipe/format
then to flash use the option "install from zip file" not sure where that is in TWRP but it will have one
Okay. I will reflash the rom after completely wiping again. Thanks.
On a different note, why do roms require particular bootloaders?
Also different, how do you like your SGS3? If i can manage to fix this thing, perhaps I'll root my phone...
NvigR8 said:
Okay. I will reflash the rom after completely wiping again. Thanks.
On a different note, why do roms require particular bootloaders?
Click to expand...
Click to collapse
The stock ICS BL is encrypted - more or less - the only way to 'flash' a recovery or rom is to have the "key" that "unlocks" - it more or less - if you dont use the right key then the OS will not boot - the 'key' is based on your cpuid which is why everyone is forever telling you to save it somewhere safe....
Also different, how do you like your SGS3? If i can manage to fix this thing, perhaps I'll root my phone...
Click to expand...
Click to collapse
I enjoy the big screen, took awhile to get used to it in my hand, kept dropping it....then I ran it over with my 44tonne truck after 3 days and munted it!!!!
I have a case for it now, and its gr8 - I havent installed a rom on it yet...the forums over there are jampacked and I have no idea what I'm doing, lol - its the first android device I've had that I've left stock for so long...but it does what I want...the camera is awesome -burst mode is the bomb - BUT do I think it was worth the money???? Still on the fence about that one.....
Ouch. Sorry to read about running over your phone. That would kill me. I really like my SGS3. I think I'll look into rooting it just to be able to back it up and get rid of the bloatware. I did that on my Captivate and prior to today, thats all I've ever done modding wise to an android device.
So, I managed to get my tab up and running again. Yay! I reflashed the rom w/out changing the name and worked like a charm. Now If only I knew why this happened in the first place... Thanks for all your help.
NvigR8 said:
Ouch. Sorry to read about running over your phone. That would kill me. I really like my SGS3. I think I'll look into rooting it just to be able to back it up and get rid of the bloatware. I did that on my Captivate and prior to today, thats all I've ever done modding wise to an android device.
So, I managed to get my tab up and running again. Yay! I reflashed the rom w/out changing the name and worked like a charm. Now If only I knew why this happened in the first place... Thanks for all your help.
Click to expand...
Click to collapse
yeh sometimes happens with the tab for some reason - thank your lucky stars it didn't get stuck in apx mode...if that happens its normally a hardware fault so theres not alot u can do...I'm just pleased you got sorted without too much drama and it was as easy as reflashing the zip....so now you have the v8 BL - you're gold!!!
dibb_nz said:
we're assuming the tab is full stock and currently on ICS...
and we're assuming he never tried to 'fix' his tab by flashing one thing or another...
the bootloader error worries me...what exactly does it say...
Yes the wipes are really important!! and not being able to use the button method to do so is concerning...
what happens with the Over The Air (OTA) updates is its just that...an update...it leaves all your settings/data intact. When you OTA from one build to another, like Gingerbread 3.0 to Honeycomb 3.1/2 and then to ICS 4.0 - you drag all your apps and settings with you and of course some things that work with 3.2 will not work under ICS....fjor instance, lots of folk had trouble with wifi disconnects, once they got to ICS - or they had apps force closing and other 'glitches'. This is why everyone tells you to do the wipes - as this fixes these things! In the case of stock ICS my gmail would f/c all the time no matter how many times I wiped/formatted....So for a smooth running tab - flash a custom rom!!!!!!
But getting back to you...
From that link i gave you...download the 3.1_Full.zip....its decrypted so just extract it and get the "update.zip" from it..
This "update.zip" is not an incremental "update" but the full stock rom....
once installed you'll be on GB you will need to root it with iconia root and then use acer recovery installer to flash cwm....(get these from the playstore)
do a backup or adb devices so you can get your CPUID....this is important...if anything goes wrong at any stage this is the only thing that will get you unbricked....see the cpuid link in my sig for more on this, please take the time to read it, even if it doesnt make much sense to you, read it anyway....
AFTER you have retrieved your cpuid, you can nvflash the patched bootloader/recovery pkg which means you are able to flash ICS/JB custom roms
they cannot be flashed via cwm like normal...you must use nvFlash to do it....
OR
take the OTA route to ICS...this takes a bit of time...I did it last week and it was a good 6-7 hours to go from GB to ICS
there are pre-rooted stock roms if you wanna stay stock see civato's stock rom thread for that here http://forum.xda-developers.com/showthread.php?t=1633907
official stock rom list by blackthund3r are here http://forum.xda-developers.com/showthread.php?t=1816560
civs guide to flashing the unlocked bootloader here http://forum.xda-developers.com/showthread.php?t=1622425
Click to expand...
Click to collapse
When i do the wipe it says
Code:
Erasing userdata...
Code:
Unrecoverable bootloader error (0x19000008)
Unrecoverable bootloader error (0x19000008)
Hogbola said:
When i do the wipe it says
Code:
Erasing userdata...
Code:
Click to expand...
Click to collapse
I googled your error - the consensus from what I read is a corrupt OS due to running OTA updates...
Some had luck with rebooting. Others had to send it to Acer.
Did you run the update.zip? so what happens when you run the update.zip
Are you able to get into "apx mode"? If you can, hook up to your PC and see if your tab is recognised as an "apx device" - check "Hardware, Printers in win7"
Thats all I can suggest atm - if your tab does get into apx mode OK then you can find your cpuid by running Linux -
Maybe ask the guy if he's ever had the tab hooked up to his PC like to transfer files and stuff - get him to download "USBdeview" to his PC -
this will show every single device thats ever been connected to the PC and it will show the "cpuid"...
Even if we do get the uid theres no guarantee it will fix the bootloader error - but we may as well explore all the options we can....
dibb_nz said:
USBDeview will only work when you have previously plugged your tab into the PC WHILE you were running HC Rom and BL
1. If you haven't plugged your tab into this pc before, do so now, before you run the program. HC ROM/BL ONLY
1a. Run the exe and you will be presented with a window of all the USB devices you have ever plugged into your computer.
2. Click on "VendorID" column along the top to sort them
3. Look for the number "0502" under Vendor ID AND "3325" Product ID
4. In the serial number column will be a 15-digit number this is your device ID.
5. Write the number down and put a 0 in front of it and now you have your CPU ID!!!
Click to expand...
Click to collapse
Hello all, when I try to use the SD update I get the upright Android with the green bar below & within a few seconds I get the dead Android with a red exclamation mark above his chest. Does this indicate a hardware fault or should I keep trying different update files? Thank you, hoz
thehoz78 said:
Hello all, when I try to use the SD update I get the upright Android with the green bar below & within a few seconds I get the dead Android with a red exclamation mark above his chest. Does this indicate a hardware fault or should I keep trying different update files? Thank you, hoz
Click to expand...
Click to collapse
If you have the correct update.zip you should be fine.
If you're trying to fix a brick you may need to use nvflash.
dibb_nz said:
If you have the correct update.zip you should be fine.
If you're trying to fix a brick you may need to use nvflash.
Click to expand...
Click to collapse
I've downloaded the OTA TOOL & am trying to download Acer APX/Fastboot/Recovery Drivers but the link in Where's my CUPID no longer works. I plugged my a500 into my laptop in fastboot mode but it could not find the drivers either. Any idea where i could find them? Thank you very much for your help.
thehoz78 said:
I've downloaded the OTA TOOL & am trying to download Acer APX/Fastboot/Recovery Drivers but the link in Where's my CUPID no longer works. I plugged my a500 into my laptop in fastboot mode but it could not find the drivers either. Any idea where i could find them? Thank you very much for your help.
Click to expand...
Click to collapse
If the rom you had on there was a Stock rom you OTA'ed, then afterOTA tool is the tool to use to Update the bootloader....you are soft-bricked so none of the tools are much use to you.
Which link in the CPUID guide does not work pls, I shall fix that. Try the one in the root guide in my sig.
If you are not currently flashed to skrilax_cz unlocked bootlader, fastboot will not work.
You're really best to start at the beginning in trying to unbrick.
This means downloading everything you need BEFORE you start.
That means:
Acers website for the acer drivers.
The root guide for the adb/fastboot drivers.
A rom to flash ICS, JB or stock rooted ICS.
The babsector.rar file to unbrick you.
You need to know how to get your tab in apx mode manually.
You also need to run the flash manually. Use the babsector file for that and post any errors you get.
Read thru the root guide in my sig, and make sure you have some understanding of what you're about to do. It makes it a lot easier to have all your files downloaded. The actual flashing process takes about 5 mins.
The babsector file will reset your tabs partitions, flash a recovery so you can do the formats and wipes before flashing your rom. Also installs the v8 unlocked bootloader.
dibb_nz said:
If the rom you had on there was a Stock rom you OTA'ed, then afterOTA tool is the tool to use to Update the bootloader....you are soft-bricked so none of the tools are much use to you.
Which link in the CPUID guide does not work pls, I shall fix that. Try the one in the root guide in my sig.
If you are not currently flashed to skrilax_cz unlocked bootlader, fastboot will not work.
You're really best to start at the beginning in trying to unbrick.
This means downloading everything you need BEFORE you start.
That means:
Acers website for the acer drivers.
The root guide for the adb/fastboot drivers.
A rom to flash ICS, JB or stock rooted ICS.
The babsector.rar file to unbrick you.
You need to know how to get your tab in apx mode manually.
You also need to run the flash manually. Use the babsector file for that and post any errors you get.
Read thru the root guide in my sig, and make sure you have some understanding of what you're about to do. It makes it a lot easier to have all your files downloaded. The actual flashing process takes about 5 mins.
The babsector file will reset your tabs partitions, flash a recovery so you can do the formats and wipes before flashing your rom. Also installs the v8 unlocked bootloader.
Click to expand...
Click to collapse
The link under DRIVERS: Acer Support for Acer APX/Fastboot/Recovery Drivers. Just loads a Acer error page. I get the same error page when using the link in [GUIDE][ICS] Beginners Guide - Rooting, Flashing, Unbricking.
I downloaded the OTA tool to get my CUPID, tried blackthund3r A500 manager but I need BUSYBOX installed. What would be the easiest way to get my CUPID?
About 3 months ago I bought a manufacturer refurbished motherboard from the States (I'm in Australia) had my local PC shop install it, been working great. The other night it froze & I turned it off & then back on & its won't boot past the acer screen. It's stock, I haven't modified it in any way.
i have iconia a200 got brick
I think I'm having issue with the adb and fast boot drivers..not sure it they are installed. My tab only boots into apx mode. It will launch to bootloader mode while trying any of the tools. .but hands mid way. Doesn't seem the tools see it correctly because no atx devices are detected. The acer picassa driver goes I'm because I see the tab pop up. .but not sure the other drivers are right. So I'm stuck.
Sent from my SCH-I535 using Tapatalk
Hi all
Thanks for viewing my thread
I need help from all experts here
Currently my Iconia is using Honeylicious firmware
I've tried to search most of the thread but not really understand the method to upgrade from Honeylicious (Honeycomb) to Jelly Bean
Can someone teach me proper way to upgrade
I really appeciate any help from u all
Thanks in advance
bazsh said:
Hi all
Thanks for viewing my thread
I need help from all experts here
Currently my Iconia is using Honeylicious firmware
I've tried to search most of the thread but not really understand the method to upgrade from Honeylicious (Honeycomb) to Jelly Bean
Can someone teach me proper way to upgrade
I really appeciate any help from u all
Thanks in advance
Click to expand...
Click to collapse
@bazsh.....This is only a thought for you to consider. You say you are using Honeylicious which was a specialised ROM designed, developed and published by an Iconia developer who used the name kjy2010. If you are using this ROM it implies that you have installed a specialised "Recovery" such as CWM by ClockWorkyMod or TWRP by TeamWin and that is how you installed Honeylicious onto your Tab. If this is the case the easiest thing to do is search the "Developer" thread until you find a "JB" ROM you would like to use.....download it onto your ext_sd then use your "Recovery" program to flash it to your Tab. My own personal preference is for the JB-4.1.2 ROM by "civato" but to each his own. Don't forget to read the installation instructions regarding what to "wipe" before you flash.
metpolds said:
@bazsh.....This is only a thought for you to consider. You say you are using Honeylicious which was a specialised ROM designed, developed and published by an Iconia developer who used the name kjy2010. If you are using this ROM it implies that you have installed a specialised "Recovery" such as CWM by ClockWorkyMod or TWRP by TeamWin and that is how you installed Honeylicious onto your Tab. If this is the case the easiest thing to do is search the "Developer" thread until you find a "JB" ROM you would like to use.....download it onto your ext_sd then use your "Recovery" program to flash it to your Tab. My own personal preference is for the JB-4.1.2 ROM by "civato" but to each his own. Don't forget to read the installation instructions regarding what to "wipe" before you flash.
Click to expand...
Click to collapse
It's an HC Rom so flashing via recovery won't work until you've installed the patched bootloader. i.e skrilax_cz v8+ ... Doing the wipes is imperative as @metpolds said.....as is the CPUID.
Guides are in my Sig.
Sent from my HTC_PN071 using Tapatalk
metpolds said:
@bazsh.....This is only a thought for you to consider. You say you are using Honeylicious which was a specialised ROM designed, developed and published by an Iconia developer who used the name kjy2010. If you are using this ROM it implies that you have installed a specialised "Recovery" such as CWM by ClockWorkyMod or TWRP by TeamWin and that is how you installed Honeylicious onto your Tab. If this is the case the easiest thing to do is search the "Developer" thread until you find a "JB" ROM you would like to use.....download it onto your ext_sd then use your "Recovery" program to flash it to your Tab. My own personal preference is for the JB-4.1.2 ROM by "civato" but to each his own. Don't forget to read the installation instructions regarding what to "wipe" before you flash.
Click to expand...
Click to collapse
Thanks for ur reply
Yes I am using kjy2010 ROM
But he stopped developing new custom ROM for quite some time
After he quit I've tried to search the method to upgrade but it seems quite difficult for me coz im quite noob
Anyway what is the proper method that i can use so that i can install civato's ROM
It's good if u can give me an outline what to
I'll try to read on each thread after that
Tq
@dibb_nz..... Many thanks for bringing up the important point I forgot.....the bootloader!! I have been using skrilax_cz's v8 for so long now that I completely forgot about it.(face/slap)
dibb_nz said:
It's an HC Rom so flashing via recovery won't work until you've installed the patched bootloader. i.e skrilax_cz v8+ ... Doing the wipes is imperative as @metpolds said.....as is the CPUID.
Guides are in my Sig.
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Thanks you for ur suggestion
Can u give me outline what to do so that I can get my bootloader patched?
Once my bootloader patched, can I install any ROM I like?
Tq
@bazsh.... @dibb_nz can answer your questions better than I, but look at the attached post/link which is by @civato it will tell you how to install the new botloader, provided you can understand what he is saying.
NO insult intended.
http://forum.xda-developers.com/showthread.php?t=1622425
None taken
1. Retrieve yr cpuid see guide in my Sig
2. Head to civato's guide for the bootloader.
3. Flash skrilax_cz bootloader /recovery
4 enter recovery and wipe all
5 flash jb rom
Sent from my HTC_PN071 using Tapatalk
Thnks for the outline
Will try to do it
I've read through the thread to get the CPUID
Which method is the easiest for newbie like me to proceed?
Is AfterOTA is the best method to retrieve my CPUID?
Im using Honeylicious ROM for the moment
What bootloader am I using? Supposedly HC bootloader right?
Can I just flash my tablet without getting CPUID & flash skrilax bootloader?
bazsh said:
I've read through the thread to get the CPUID
Which method is the easiest for newbie like me to proceed?
Is AfterOTA is the best method to retrieve my CPUID?
Im using Honeylicious ROM for the moment
What bootloader am I using? Supposedly HC bootloader right?
Can I just flash my tablet without getting CPUID & flash skrilax bootloader?
Click to expand...
Click to collapse
cpuid displayed on recovery screen or Nandroid backup
No afterOta only for stock Rom
Cpuid mandatory!
dibb_nz said:
cpuid displayed on recovery screen or Nandroid backup
No afterOta only for stock Rom
Cpuid mandatory!
Click to expand...
Click to collapse
Im trying to use usbdeview on my windows laptop
Which one is my cpuid?
is it the 15 digits at the serial no?
something like 37c61...
I already read Civato's & Skrilax thread but still confused
I've downloaded Skrilax V9 patched bootloader, CWM update, APX Flash, SBKTest
How do I flash my bootloader?
Using APX Flash or NVMflash?
And it says that it will patch ICS bootloader but am I using HC bootloader currently?
Is it safe to flash on HC bootloader?
OMG...too many jargon words for me
Any experts please help
bazsh said:
I already read Civato's & Skrilax thread but still confused
I've downloaded Skrilax V9 patched bootloader, CWM update, APX Flash, SBKTest
How do I flash my bootloader?
Using APX Flash or NVMflash?
And it says that it will patch ICS bootloader but am I using HC bootloader currently?
Is it safe to flash on HC bootloader?
OMG...too many jargon words for me
Any experts please help
Click to expand...
Click to collapse
Use manual nvFlash it's best since yr tab is not booting.
Yes it's ok to flash from HC b/l.
The jargon side is a bit tuff but u just need to do take one step at a time. Don't be in a rush and you'll be fine. If something doesn't seem to be working then STOP. Don't carry on. Or hope it will be ok. Just come back here and ask.
The sbk test is a good start, if that runs ok then u shouldn't have any probs with the actual b/l flash!!
Good luck!!
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
Use manual nvFlash it's best since yr tab is not booting.
Yes it's ok to flash from HC b/l.
The jargon side is a bit tuff but u just need to do take one step at a time. Don't be in a rush and you'll be fine. If something doesn't seem to be working then STOP. Don't carry on. Or hope it will be ok. Just come back here and ask.
The sbk test is a good start, if that runs ok then u shouldn't have any probs with the actual b/l flash!!
Good luck!!
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Thanks for the motivation
I tried to test my CPUID using SBK test but seem it wont run (no cmd command box)
When i tried to connect my iconia there is no problem for the laptop to recognize my tab
I can browse the tablet memory but why is inside A500 manager it says "No A500 connected"?
can somebody help me?
bazsh said:
Thanks for the motivation
I tried to test my CPUID using SBK test but seem it wont run (no cmd command box)
When i tried to connect my iconia there is no problem for the laptop to recognize my tab
I can browse the tablet memory but why is inside A500 manager it says "No A500 connected"?
can somebody help me?
Click to expand...
Click to collapse
Becoz there are 2 sets of drivers required. One for 'browsing tablet memory' and the apx driver for 'nvflash' to work
This is why the cmd window never popped up with sbk test.
So u have a driver issue to solve.
Which OS is yr pc running, 64bit and win8 are dodgy. Win7 an xp are best.
You won't get any further till u get this sorted.
There's a mini guide for correct driver installation in the first post of the cpuid guide, near the bottom.
Stick with the manual method, it's easier for us to pin your issues.
May pay to check out my root guide too if u want mo're detail than civato's guide. There are no problems you will face that have not been solved here many times over.
As I said b4, take things slowly and one step at a time. We don't want to end up talking u thru how to unbrick!!
dibb_nz said:
Becoz there are 2 sets of drivers required. One for 'browsing tablet memory' and the apx driver for 'nvflash' to work
This is why the cmd window never popped up with sbk test.
So u have a driver issue to solve.
Which OS is yr pc running, 64bit and win8 are dodgy. Win7 an xp are best.
You won't get any further till u get this sorted.
There's a mini guide for correct driver installation in the first post of the cpuid guide, near the bottom.
Stick with the manual method, it's easier for us to pin your issues.
May pay to check out my root guide too if u want mo're detail than civato's guide. There are no problems you will face that have not been solved here many times over.
As I said b4, take things slowly and one step at a time. We don't want to end up talking u thru how to unbrick!!
Click to expand...
Click to collapse
Will look at ur CPUID guide & find the missing driver 1st
I'll try to do it step by step
Dun want to brick my device
Sent from my iPad using Tapatalk
I already go through your thread regarding CPUID
Under driver headings :
1) APX/Fastboot/Recovery drivers - it leads me to Acer website but have error 404 "page not found"
2) adb_fast.zip
Which one do i need to download?
I downloaded adb_fast.zip & extracted it but how do i use it?
I just able to install USB driver
I think my problem ealier is because I dont turn on USB debugging
Now A500 Manager able to recognize my tablet
And I already tested with SBK test & I think I have the correct SBK
From here where should I proceed?
I've 2 ways to patch the bootloader
1 is via APX Flash tool & another one is by doing manually
Which one is the easiest & recommended for me?
Next question is....which bootloader should I choose?
Skrilax_CZ V8 or the latest version V9?
And I dont understand because there are 3 choices with different names
Which one should I choose?
Thanks in advance...really need help
bazsh said:
I just able to install USB driver
I think my problem ealier is because I dont turn on USB debugging
Now A500 Manager able to recognize my tablet
And I already tested with SBK test & I think I have the correct SBK
From here where should I proceed?
I've 2 ways to patch the bootloader
1 is via APX Flash tool & another one is by doing manually
Which one is the easiest & recommended for me?
Click to expand...
Click to collapse
if sbk test has given you the cpuid, then use the manual flash method now, just run the v8.bat file and you'll be done.
Next question is....which bootloader should I choose?
Skrilax_CZ V8 or the latest version V9?
And I dont understand because there are 3 choices with different names
Which one should I choose?
Thanks in advance...really need help
Click to expand...
Click to collapse
v8 or v9, doesn't matter. Once you've run the bat file THEN
boot direct to recovery, complete the wipe procedure and then
flash you ics or jb rom (you should have this on your ext sd card now, ready to go)
The v8/9 flash will take 2-3 mins at most.
Q&A for Acer Stock Firmware Files List (Full, Update and EUUs)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Looking to do a stock install of 3.2 on A501
blackthund3r said:
LIST OF FILES
Please note that none of these files are rooted and/or tweaked! They are stock Android ROMs from Acer and designed for stock recovery!
Flashing them will remove custom recovery and/or custom bootloader! You will be fully stock! Update zips may not install if you have modified your device in any way. If unsure use a full package! You need an EUU package only if your device is bricked as it will be completely wiped clean in the process!
-----------------------------
I am looking for the 3G version the 3.2 stock ROM to do a fresh install on my A501
The link from Vache seems dead.. can anyone please help to provide that particular ROM?
Thanks a lot. Desperately need some help as I'm password locked out!
Click to expand...
Click to collapse
sskhaliq said:
blackthund3r said:
LIST OF FILES
Please note that none of these files are rooted and/or tweaked! They are stock Android ROMs from Acer and designed for stock recovery!
Flashing them will remove custom recovery and/or custom bootloader! You will be fully stock! Update zips may not install if you have modified your device in any way. If unsure use a full package! You need an EUU package only if your device is bricked as it will be completely wiped clean in the process!
-----------------------------
I am looking for the 3G version the 3.2 stock ROM to do a fresh install on my A501
The link from Vache seems dead.. can anyone please help to provide that particular ROM?
Thanks a lot. Desperately need some help as I'm password locked out!
Click to expand...
Click to collapse
Best to just get stock ICS. Why are you password locked? Is the device stolen? I can easily help you get past it but I'm not sure whether I should.
Click to expand...
Click to collapse
Thanks blackthunder. It's our personal device, my wife set the password some time back and is sure she hasn't forgotten but for some reason it's not being accepted. We can't figure out why! I have the original receipt and box etc in case anyone's interested!
I tried the stock ICS Rom by naming it update.zip and rebooting into recovery, but that gets stuck at the Android guy logo immediately. Also tried 3.2 before that via a link from this page, and that seems to work until the progress bar hits about 80%. Then it just reboots back to the dreaded locked screen. From what I understand I can only do a reinstall of the same ROM version that's currently installed? We have a password lock on it, and not pattern. Would highly appreciate any help. . Really want this thing to start working again. It's practically new [emoji20]
Guys any idea? Really desperate here. Thanks in advance!!
sskhaliq said:
Thanks blackthunder. It's our personal device, my wife set the password some time back and is sure she hasn't forgotten but for some reason it's not being accepted. We can't figure out why! I have the original receipt and box etc in case anyone's interested!
I tried the stock ICS Rom by naming it update.zip and rebooting into recovery, but that gets stuck at the Android guy logo immediately. Also tried 3.2 before that via a link from this page, and that seems to work until the progress bar hits about 80%. Then it just reboots back to the dreaded locked screen. From what I understand I can only do a reinstall of the same ROM version that's currently installed? We have a password lock on it, and not pattern. Would highly appreciate any help. . Really want this thing to start working again. It's practically new [emoji20]
Click to expand...
Click to collapse
Your beat bet is using an EUUs package to wipe the tablet and reset back to 3.0.1 then use Flash Tool to get CWM or TWRP + a decent ROM
blackthund3r said:
Your beat bet is using an EUUs package to wipe the tablet and reset back to 3.0.1 then use Flash Tool to get CWM or TWRP + a decent ROM
Click to expand...
Click to collapse
To install EUUs, is it the same process; rebooting with power+volume and flashing via SD card? What version EUUs do you think I need, currently I have 3.2 installed. Is there a guide for above?... will be a lot of help. Many thanks
sskhaliq said:
To install EUUs, is it the same process; rebooting with power+volume and flashing via SD card? What version EUUs do you think I need, currently I have 3.2 installed. Is there a guide for above?... will be a lot of help. Many thanks
Click to expand...
Click to collapse
Actually, even easier.....use the APX Flash Tool to get yourself a CWM Image (you'll need your SBK....there's a fair few guides on obtaining this) then do a wipe data/factory reset within CWM.
From there it's fairly easy to side load the latest Acer ROM.
Thanks. I'll try it out over the weekend! Appreciate your help!
God morning! For the apx tool, I'm not sure if USB debugging option is selected, never ticked that myself consciously. Is it OK to go ahead?
Tried using the apx tool after downloading the Acer USB drivers and in short no luck.
Had to go the manual route for flashing since I don't have USB debugging enabled.
Tried two packages, one honeycomb bundle 6 and then also tried a later one for ICS.
It goes thru the motions enters APX mode with confirmation as well on the tab screen, without any hiccups right to the end. But then reboots to the old dastardly lock screen asking for password!
Any ideas? Already backed up using mobo app so am OK to wipe clean and start anew.
Acer b1-720 update.zip
Do you have any update.zip firmwares for an acer B1-720? Its the only way i can restore my tablet
Good sir i'm new with this stuff, will you teach me how to flash in my acer a500 tablet and what is the right firmware because my acer a500 stuck oin logo, hope yuo will teach how. Thank you and more power
Good day sir i'm sorry sir but really dont which should i flash on my acer a500 that stuck on logo, pls help me which file shoukd i flash and step by step how to flash thank you for the help
Iconia
Guyz.. Im not finding any firmware for Acer iconia b1 711. And this is bricked too. I only have an update file which i received from AcerAcer. And im not able to install it too. Plz help...
Options for upgrading an Acer A500: Acer_A500_4.010.15_COM_GEN1
OK, heres a totally noob question. I have an Acer A500 I bought used. It has been rooted apparently. Has the ClockWorkMod bootloader installed, v5.0.
My question is, what are my options to upgrade this tablet and is there a thread with instructions on which firmware files to use, how far can I go with upgrading the A500 (ICS?). Not really looking to trick it out and go the whole mod route, would be happy with stock firmware, just looking to make it a little more up to date and, above all _stable_! The main issue I have with it now is the wifi craps out every month or so and I have to do a refresh and wipe all info and start over.
I used to get prompted to install a system update, and every time, it would fail with the dead Android dude on his back....so sad. Now, it just tells me, "Network Coverage is poor, please move to a location with better coverage". I am sitting right beside my router...
Here are the relevant specs:
Model number: A500
Build number: Acer_A500_4.010.15_COM_GEN1
Kernel version: 2.6.36.3
If you need any other info in order to help, just let me know.
Thank you very much in advance for any advice!!