Related
I have the newest version of KIES
It connects fine but disconnects when trying to upgrade (look at the third picture at the bottom right corner)
Is it because I'm in the united states?
Sent from my GT-I9100 using XDA Premium App
Try a different USB port. Preferably directly on the motherboard.
what's new in the new firmware?
Hopefully a more compatible modem for wider areas. My H+ is what my HSDPA was on my Captivate.
Seriously, what is up with this POS KIES program? My phone is connected then once I start the upgrade, the connection is lost. WTF???
I've been googling this issue for an hour.
rwc3b said:
I have the newest version of KIES
It connects fine but disconnects when trying to upgrade (look at the third picture at the bottom right corner)
Is it because I'm in the united states?
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Why not just flash with Odin? I've not used Kies to update firmware since Galaxy S JM8 firmware.
Intratech said:
Why not just flash with Odin? I've not used Kies to update firmware since Galaxy S JM8 firmware.
Click to expand...
Click to collapse
Where does one find the official untouched firmware?
Thread here: http://forum.xda-developers.com/showthread.php?t=1075278
rwc3b said:
Seriously, what is up with this POS KIES program? My phone is connected then once I start the upgrade, the connection is lost. WTF???
I've been googling this issue for an hour.
Click to expand...
Click to collapse
Usually your PC /AV/Firewall .
jje
guys I think this is because he is in the states. Its obvious Samsung's servers aren't ready for them it isn't even out yet. Hack reg kies or flash Odin. However it is only minor fixes. Swype + little connectivity issues and auto brightness fix. Unless you use them regularly I wouldn't worry about it.
JJEgan said:
Usually your PC /AV/Firewall .
jje
Click to expand...
Click to collapse
check your firewall
i tried three times before the update worked
i'm using Nod32 as AV & Firewall, and the software asked me to allow different connections
I have the same problem. Am in the UK. Trying to do it officially. Only had the phone a couple of days. The handset says it is connected but Kies goes round and round incirclesoffering me he upgraqde, backing up everything and then sayig it is disconnected. Help!
Read the thread, the OP has been helped.
I see alternative ways outside of Kies for doing things, but nothing that covers why the 'proper' way of doing things doesn't work for some of us.
Oh well, it's proper enough for the official service centres to use that where it came from.
In case it helps anyone else, a combination of uninstalling Kies, reinstalling and using a different USB port [on a laptop, so they are all on the motherboard] appeared to do the trick for me, though I have no idea why that should be.
phkrh said:
In case it helps anyone else, a combination of uninstalling Kies, reinstalling and using a different USB port [on a laptop, so they are all on the motherboard] appeared to do the trick for me, though I have no idea why that should be.
Click to expand...
Click to collapse
Me to and turning my phone on and off works 2, also turning the Anti Virus off...
rwj5279955 said:
Try a different USB port. Preferably directly on the motherboard.
Click to expand...
Click to collapse
thanks for your advise i was trying to update my sgs2 ke2 version and i had same problem than i tried an usb on the motherboard finally it works
I have got the same problem as the OP while trying to update the firmware of my galaxy s II. I tried everything from reinstalling kies to running it as an administrator and I even connected to every usb port on my laptop. The same thing happens: When i click skip backup and start to download the update, the connection is immediately lost (as shown in the SS of OP).
I haven t tried ODIN yet, and would rly like to update my phone with kies and use odin as my last resort since I m not a techie.
I also disabled the anti-virus and also tried to update my phone in flight mode without any success :/ I should also mention that my kies is somewhat ****ed up as sometimes it keeps connecting to my device. To solve the problem i have to uninstall the drivers of my phone from the pc and reinstall the device automatically once i plug it in the pc. After that kies connects automatically to my device.
Somebody else is experiencing the same problem and managed to solve it? Any help would be appreciated Thanks
I can't Kies to work at all. It detects my phone and has presented the firmware upgrade dialog couple times but the upgrade always fails before starting. I've disabled my firewall (Windows Firewall) and anti-virus (Security Essentials) to no avail. Backup also never works, it just says "Preparing..." forever. There seems to be no way to trigger the update manually (rightclicking on GT-I9100 shows firmware upgrade item as disabled).
Thanks to Samsung for the prompt update! Thanks to Google for the free tablet!
To update, just go to Settings->About Tablet->Software Update->Check for Updates.
If you don't have a Samsung account, you will have to create one. I'm in the US, but there wasn't a choice for that so I chose UK and it worked just fine.
It will download the update and reboot to install it. The download is pretty quick, but the update takes quite a while to apply. Once it gets to about 73% complete or so, the update inches along very slowly. So just be patient.
After the update, the lock screen background is different but all my settings were preserved.
About tablet (after upgrade):
Android version: 3.1
Kernel: 2.6.36.3
Build: HMJ37.UEKF3 P7510UEKF3
EDIT:
- The upgrade does not make you loose root access. This tablet really is a dream for developers.
- I don't see any evidence of any TouchWiz components anywhere. It still appears to be stock.
- Since this is a WiFi tablet, there's still no access to the Android Video Store (plus I'm rooted). Supposedly that is only enabled on 3G tablets for some reason. Oh well, who cares.
Have fun!
Hi, has it got the awful touchwiz built in or is it still "vanilla" android?
My thanks, like you, to samsung for the update and the tab
I have rooted my IO tab and froze some of the samsung system apps with titanium backup. I'm hesitant to update until I get some more information.
I don't think if touchwiz is ready yet. It will be updated later...
Does this break root or CW recovery? Or can you boot into fastboot after the update?
tau_ said:
I have rooted my IO tab and froze some of the samsung system apps with titanium backup. I'm hesitant to update until I get some more information.
Click to expand...
Click to collapse
Same here, rooted, apps frozen with TB.... not at all worried at the quality of 3.1 update versus 3.0.1 delivered on the tab at IO but would have to fall on my ceremonial sword if I updated and ruined a lovely piece of kit by subjecting it to touchwiz... More than my honour could handle
No disrespect but not interested in comments repeating ill informed speculation from" uninformed" blogs, just want a straight answer, so if you are still online ageitgey can you tell us yes or no as regards TW - thanks
Thanks a ton!
Downloading as we speak.
There is no sign of TouchWiz in 3.1. It looks completely the same as before, except minor differences (new lock screen background, slightly different wifi icon, etc).
Root was preserved after my upgrade. RootExplorer still works fine and was granted root permissions.
I didn't have Titanium installed, so I can't comment on that. But I doubt there would be an issue.
anybody else having issues updating?
I am getting
"Failed to update firmware. Try again useing PC software (Kies) or visit a Samsung service centre."
not really sure what to do from here.
Concur, no sign of touchwiz, root preserved, titanium works fine. Bizarrely background color of text box when writing this has changed from white to blue and font is dark blue. Apps seem to work ok.
Well report other changes as and when found
onovich, you are not alone. I get the same thing.
onovich said:
anybody else having issues updating?
I am getting
"Failed to update firmware. Try again useing PC software (Kies) or visit a Samsung service centre."
not really sure what to do from here.
Click to expand...
Click to collapse
Maybe try what it says and try kies ( latest version of course and make sure you have installed latest drivers for the tab in kies- tools menu-" install driver")
stinky73 said:
Maybe try what it says and try kies ( latest version of course and make sure you have installed latest drivers for the tab in kies- tools menu-" install driver")
Click to expand...
Click to collapse
I did, it doesn't connect via kies. It just spins saying connecting. although windows has no problem recognizing it.
oh thank god, ive been checking everyday for a month
any ideas on how to get the android video store working
any official change log
is usb host mode enabled
mine says the same thing are you rooted with clockwork as your recovery?
onovich said:
I did, it doesn't connect via kies. It just spins saying connecting. although windows has no problem recognizing it.
Click to expand...
Click to collapse
Kies says that "This version of the device cannot be updated".
OTA update doesn't work because I've rooted the ROM and installed busybox.
Probably after reverting to stock ROM via Odin OTA update will work?
Updated here, not too many changes noticeable to the end user. Wonder about USB Host - I suppose we need an adapter of some kind because of Samsung's proprietary 30pin port?
so whats the official word on updating
will it work if you are rooted , or unlocked bootloader, or both
Hi all.. I have a Galaxy Tab 10.1 gt p7500 one month old, and I saw that there is finally an update to ICS. I still dont got it try mobile netowork (t-mobile - Macedonia), so i read that I can update thru kies. The problem is, I cannot connect mu tab to kies??? I dont have an USB option on Wireless and Networks and it connects in MTP mode. Is there any way to fix this problem and if not, how can I update my tablet to stock version of ICS in some other way? Please help...
Regards
It sucks that kies won't work now that ics is out. I'm having trouble updating mine as well.
Kies is not a product
I have tried for almost a year now to get my tab recognised by Kies, but only a factory reset will get Kies to recognise my tablet. The moment I install my own software on it again that disappears.
Kies via Wifi has no firmware upgrade option, sad to say, so best wait for OTA upgrade.
I am waiting too for the OTA as that POS named Kies is not working for me. But it is coming, just be a little more patient. It is rolling out in the US, maybe even in Canada. The rest of Europe will follow, or you can download from samfirmware.com, and do it over USB via Odin (lots of threads covering that)...
Best of luck!
I did a reset in anticipation of the update and was able to do the update through Kies
with no problem.
I had 2 Galaxy 10.1, one of them could only connect wireless for update, not with Kies, the other one could not update OTA, only with Kies... and to connect I had to reset the device, Kies is really worth nothing...
One of the reasons why I am only using custom ROM
I fought with it for a couple hours last night, and finally resorted to a factory wipe. Then it was fine. Just means a few hours of reinstalling and configuring widgets, but still annoying as hell that after 2 years Kies doesn't work with 3.2 stock rom.
ProximaC said:
I fought with it for a couple hours last night, and finally resorted to a factory wipe. Then it was fine. Just means a few hours of reinstalling and configuring widgets, but still annoying as hell that after 2 years Kies doesn't work with 3.2 stock rom.
Click to expand...
Click to collapse
It's far worse: I could never connect to Kies. One day I just wanted to test connecting to Kies, so I did a Backup with Titanium Backup and then a factory reset. Thereafter I could connect without any issues. So I restored all settings - user and system data with everything! - from my TB and expected not to be able to connect after doing that. But oh wonder! I still could connect to Kies!
But about a week later it was again like before: No connection to Kies :silly: That was the last time I started the software on my PC :cyclops:
After the update, and after I updated the apps that are included with the tab, and after I reinstalled all of my apps,
I tied Kies again. Tab connected wih no problems.
Looks like that's one of the things fixed in ICS.
From what I gathered from the internet and other forums the problem with Kies apparetly is that if there is a file with a filename that kies doesn't like, it won't connect. The big problem is find that file or files
Sent from my GT-P7510 using xda app-developers app
Kies kies bye bye
digitalundertaker said:
From what I gathered from the internet and other forums the problem with Kies apparetly is that if there is a file with a filename that kies doesn't like, it won't connect. The big problem is find that file or files
Click to expand...
Click to collapse
That is my understanding too. But when I remove all non-essential files (i.e. "personal" files) from the system it still did not work... So it must be one of the files related to a product.
To find out which one (or which ones...) will take a lot of time, and I do not want to spend that much time on a POS product like Kies... So for now I will wait for the OTA update, or the end of August 2012, whatever comes first. If it still is not there at the end of this month I will go to one of the custom ROMs, and never look back.
XDA is no longer worth my time.
TimOster said:
It doesn't have to connect to Kies in order to do the update. Mine didn't.
Put it in download mode, have Kies running, connect the cable and run the Firmware upgrade and initialization from the tools menu.
Click to expand...
Click to collapse
That IS an interesting concept. Never thought that might work. I have given up, surrendered to Kies, reset the GTab, got Kies working, but alas, no update here in Canuck Territory... So all for naught!
I will try your approach on the other GTabs I've got...
Thanks for the tip!
-- EDIT --
Guess what? When running Firmware upgrade and initialization I get the message: "'GT-P7510' does not support initializing."
And that is all I can do, no upgrade via that path possible...
I did a factory data reset and upgraded to ICS via wi-fi. And my 7510 was still rooted
Hello to you to you all. I wish I never rooted. I need to know what I did to my phone now that I used Kingroot on this Grand Prime. I also need to get my phone to not say custom in about phone. I tried Samsung Kies and I got error messages. Do I need to flash a stock Rom? Is my bootloader damaged? Please, I beg you experts please help me?. Thank you all in advance for your time and effort.
HammersmashDFCC said:
Hello to you to you all. I wish I never rooted. I need to know what I did to my phone now that I used Kingroot on this Grand Prime. I also need to get my phone to not say custom in about phone. I tried Samsung Kies and I got error messages. Do I need to flash a stock Rom? Is my bootloader damaged? Please, I beg you experts please help me?. Thank you all in advance for your time and effort.
Click to expand...
Click to collapse
Use super su, and un-root your phone with the option for un-root. Or just flash stock rom that's match your model.
I apologize but I have tried to give supersu superuser status although supersu would have those permissions from kingroot, it could not update it's binaries. When I did a full unroot with kingroot, my phone still was not allowed to receive over the air updates via wifi. About flashing a stock Rom I can reroot with kingroot but I cannot locate any stock Rom for this phone. I did a lot of research trying to find one. Can you please advise to as to where to go so that I can locate the stock Rom? Thank you.
HammersmashDFCC said:
I apologize but I have tried to give supersu superuser status although supersu would have those permissions from kingroot, it could not update it's binaries. When I did a full unroot with kingroot, my phone still was not allowed to receive over the air updates via wifi. About flashing a stock Rom I can reroot with kingroot but I cannot locate any stock Rom for this phone. I did a lot of research trying to find one. Can you please advise to as to where to go so that I can locate the stock Rom? Thank you.
Click to expand...
Click to collapse
here. just use odin to flash. and choose the correct version of your phone.
http://www.sammobile.com/firmwares/search/grand prime/
Thank you very much
I really appreciate you time and effort that you did.
Getting the stock firmware
I have searched that particular location and my model is SM-G530AZ and it's not found in that directory. I am at a checkmate. Unless I can use a firmware from one of the Grand Prime phones with a similar model but that to me does not make too much sense... Or maybe it does. But regarding my particular model it doesn't exist (or so it seems. Can one please come up with a solution? Flashing the Rom is the only option at this point so need download stock. Thanx everyone. ?.
HammersmashDFCC said:
I have searched that particular location and my model is SM-G530AZ and it's not found in that directory. I am at a checkmate. Unless I can use a firmware from one of the Grand Prime phones with a similar model but that to me does not make too much sense... Or maybe it does. But regarding my particular model it doesn't exist (or so it seems. Can one please come up with a solution? Flashing the Rom is the only option at this point so need download stock. Thanx everyone. ��.
Click to expand...
Click to collapse
Since your model is a dual with lte i guess you can use the 530h firmware. but i'm not sure.
My Model's Definite Firmware
Thank you very much for that info. But its not a definite so I wouldn't go ahead with it. I find it very interesting that for every other model of the Grand Prime there is a definete stock software available for the user. But when it comes to mine there isn't. So if anyone can possibly find it I'll be so happy.
HammersmashDFCC said:
Thank you very much for that info. But its not a definite so I wouldn't go ahead with it. I find it very interesting that for every other model of the Grand Prime there is a definete stock software available for the user. But when it comes to mine there isn't. So if anyone can possibly find it I'll be so happy.
Click to expand...
Click to collapse
I am facing the same challenge with my G530AZ model aswell. I am not even able to see my Network mode menu to change after realizing my device can not receive 3G signal only Edge. I located this menu after rooting to unlock my phone however it has completely vanished as I may put it. Any news on a compatible stock rom will be appreciated aswell.
Solution for reverting phone fully into stock (SM-G530AZ) & any other Samsung
I wasn't going to let Samsung Customer Service get away with not be able to give me info on how to get the code for emergency recovery mode using Samsung Kies. I got the Samsung Rep to tell me how to get the code in Kies all the time (in emergency recovery mode). Have the usb plugged in first without the phone connected to it. Then hold down the volume down key on your phone when it's OFF and after the volume down key is being held down, connect your phone to the USB while the Samsung Kies program is running. The code should show in Kies after that. Then go to the tools selection in Kies and click on the Recovery Mode option and you follow the further instructions. I didn't try this yet but I will very soon. I wrote this right after I got off the phone from the Samsung Rep. I really hope that this is a true method that works. If yes, cheers to all!
Sorry, can't be so trusting with Customer Service Rep of Samsung
I apologize for my previous post in a way. Well first of all this model SM-G530AZ (my model) isn't compatable with Kies as in that I got a message from Kies saying that. Therefore there was no way for me to know that the holding of the volume down method will generate the code for the emergency software reflash on this model. Finally, if that Rep was able to make that mistake I doubt whether it works for phones that are compatable with Kies.
sm-g530az
HammersmashDFCC said:
I apologize for my previous post in a way. Well first of all this model SM-G530AZ (my model) isn't compatable with Kies as in that I got a message from Kies saying that. Therefore there was no way for me to know that the holding of the volume down method will generate the code for the emergency software reflash on this model. Finally, if that Rep was able to make that mistake I doubt whether it works for phones that are compatable with Kies.
Click to expand...
Click to collapse
Any luck on flashing the sm-g530az. I try most of the firmware from sammobile. But no luck. And, sm-g5630az firmware is not in Sam Moblie.
Only solutions I can think of...
Earlier in this forum a member said that you can possibly use the 530h firmware, being that they are basically the same firmware as ours although he said he's not totally sure. If Kies 3 and the newer version of Kies (the name slipped my mind, but the message pops up anytime one installs Kies 3 asking if you want to download it) don't work because a message comes up saying that the phone doesn't support initializing, maybe what that member said is the only possible option for right now. But now I'm thinking that you can do anything to your phone which will be "normal" looking as far as for the things which the customer service reps look for see if the phone was tampered with which voids the warranty, in a repair center they can wipe all from the phone and put stock software. But the issue with that may be that the binaries that are on you phone now may cause your phone to get bricked being that their software uses different binaries. This is when they plug it in by them the phone need to load to 100% and if it stops in middle the phone is bricked. So they told me that there is that risk. If you can fool them into trying to do that flashing process on your phone because they seem to think that the warrantee is intact and it doesn't get bricked, you are good to go (I visited a Samsung repair center and found this out being that I had issues with them). But in your case that may or may not be possible . Good luck.
Your instructions were slightly off. Here's what worked.
1) install KIES 3. DO NOT PLUG IN PHONE
2) go to tools -> firmware upgrade and initialisation in KIES
3) device id = SM-G530AZ ; serial number is under battery
4) allow KIES to download the firmware
5) place phone in ODIN mode/Emergency Download Mode (hold VOL DWN and HOME while powering on ) then plug in phone to computer via USB
6) allow KIES to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) PROFIT! After the phone restarts, it will take you through initial set up (like when you bought it)
YOU WIN!! Even the Mobile Data is Set-up Already!
All your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
BONUS::
about: device status: official
odin mode:
current binaryfficial
system status: official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
OPTIONAL:
If you still want root, (re)reroot using the established method here
zomgitsanoob said:
Your instructions were slightly off. Here's what worked.
1) install KIES 3. DO NOT PLUG IN PHONE
2) go to tools -> firmware upgrade and initialisation in KIES
3) device id = SM-G530AZ ; serial number is under battery
4) allow KIES to download the firmware
5) place phone in ODIN mode/Emergency Download Mode (hold VOL DWN and HOME while powering on ) then plug in phone to computer via USB
6) allow KIES to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) PROFIT! After the phone restarts, it will take you through initial set up (like when you bought it)
YOU WIN!! Even the Mobile Data is Set-up Already!
All your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
BONUS::
about: device status: official
odin mode:
current binaryfficial
system status: official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
OPTIONAL:
If you still want root, (re)reroot using the established method here
Click to expand...
Click to collapse
did this work on the build g530az of5?
Cricket has not yet made lollipop available to me (I keep checking), so I have not been able to test it.
I have the SM-G530AZ and I'm trying to restore stock using the method you provided but I'm stuck at 8% update/initialization. I've tried everything I can think of to unbrick my phone. Please help!
iseewhatudid said:
I have the SM-G530AZ and I'm trying to restore stock using the method you provided but I'm stuck at 8% update/initialization. I've tried everything I can think of to unbrick my phone. Please help!
Click to expand...
Click to collapse
try again following those directions thoroughly, just worked for me earlier today, make sure you're on a good internet connection, and don't plug in the phone (which will be in download mode) until you absolutely have to. hope all goes well.
Thanks a million
zomgitsanoob said:
your instructions were slightly off. Here's what worked.
1) install kies 3. Do not plug in phone
2) go to tools -> firmware upgrade and initialisation in kies
3) device id = sm-g530az ; serial number is under battery
4) allow kies to download the firmware
5) place phone in odin mode/emergency download mode (hold vol dwn and home while powering on ) then plug in phone to computer via usb
6) allow kies to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) profit! After the phone restarts, it will take you through initial set up (like when you bought it)
you win!! Even the mobile data is set-up already!
all your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
bonus::
about: Device status: Official
odin mode:
Current binaryfficial
system status: Official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
Optional:
If you still want root, (re)reroot using the established method here
Click to expand...
Click to collapse
thank you so much man i had rooted my galaxy grand prime from cricket with kingroot ..couple hours later once my phone died and restarted it said my phone was flashed and locked due to unauthorized firmware ..i could not get into my phone at all.. Only able to see odin mode (download mode) ..so i did some research and could not find sm-g530az firmware anywhere for download. So i went to cricket they told me my phone is no good i had to get another one. I was furious ..but didnt give up since im pretty mobile phone and computer savvy. I still did some research found this thread and downloaded kies 3 .it did not recognize my phone for connection ..so i downloaded kies 2.6 and kies lite.
It just kept saying connecting ..so i then followed ur steps above and it brought my phone back to life ..crazy how cricket and even samsun themselves did not know what to do as i was on the phone with both of them ..they told me my phone is no longer good ..smh ...anyways thank you sooo much ..saved me about $150.
I hope this helps anyone else that is in the same position that i was in
same exact issue
BXXCLISIVE said:
thank you so much man i had rooted my galaxy grand prime from cricket with kingroot ..couple hours later once my phone died and restarted it said my phone was flashed and locked due to unauthorized firmware ..i could not get into my phone at all.. Only able to see odin mode (download mode) ..so i did some research and could not find sm-g530az firmware anywhere for download. So i went to cricket they told me my phone is no good i had to get another one. I was furious ..but didnt give up since im pretty mobile phone and computer savvy. I still did some research found this thread and downloaded kies 3 .it did not recognize my phone for connection ..so i downloaded kies 2.6 and kies lite.
It just kept saying connecting ..so i then followed ur steps above and it brought my phone back to life ..crazy how cricket and even samsun themselves did not know what to do as i was on the phone with both of them ..they told me my phone is no longer good ..smh ...anyways thank you sooo much ..saved me about $150.
I hope this helps anyone else that is in the same position that i was in
Click to expand...
Click to collapse
when i follow step 3 where i have to put in the model of the phone SM-G530AZ i enter it and it says please check model name and try again i see it says somthing about the serial number how is it supposed to be entered model name;serial number? becuse just using the model number doesnt get me passed anything :crying: :crying:
So, newer versions of Samsung Smart Switch do not offer the option for "Device Initialization" anymore.
How can I do a similar procedure apart from an Odin stock image flash?
I tried Odin stock image flash, but could not get totally unrooted that way. And was hoping to get clean unroot by using Smart Switch.
Any way to get the Device Initialization done in Smart Switch? Or does anyone have the older Smart Switch install files?
Thanks!
http://www.filehorse.com/download-samsung-smart-switch/30860/
This one worked for me. Just don't update when you open it. Regardless of the pop up that says device initialization is no longer available, it is.
The device initialization function was removed in the latest version of Smart Switch because it was exploited too much for debranding.
Here's the official download link for the last version with device initialization function:
downloadcenter.samsung.com/content/SW/201706/20170601113339558/Smart_Switch_PC_Setup.exe
MrYoan said:
This one worked for me. Just don't update when you open it. Regardless of the pop up that says device initialization is no longer available, it is.
Click to expand...
Click to collapse
this help me a lot. thanks for the link:fingers-crossed:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks
Elektryx said:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks [/
It appears samsung has blocked it. Recent versions of smart switch automatically update to newest version and older versions installation always fails. I've tried many.
Click to expand...
Click to collapse
elv1503 said:
Elektryx said:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks [/
It appears samsung has blocked it. Recent versions of smart switch automatically update to newest version and older versions installation always fails. I've tried many.
Click to expand...
Click to collapse
Now I also get the error message, that my SM-G930F does not support initialising even though it worked before, so Samsung must have really blocked it. ODIN is the only way to do this now.
Click to expand...
Click to collapse
Samsung completely removed this feature... Cannot find fw on the server. This feature is over. The only way is ODIN or something paid. Restrictions, restrictions, restrictions everywhere......
This really sucks since Odin does not completely restore everything.
After having the bluetooth share problem come up on my phone due to max bluetooth connections (I managed to successfully root the phone and delete the entries to get it working again the last time on S5) I tried again to root my phone which was unsuccessful and messed it up. After trying a few times to get the correct ROM which is hard to get as theres nowhere official to get it from (that I know of) and downloading is slow. Now its in boot loop. Spent time for 3 days running to sort out this issue and now they've completely taken out the potential way to solve it. I guess on my next upgrade I'll look into other options, to think they haven't solved the bluetooth share issue after all this time I think is just crazy.
So why samsung is not focus on this issue and does not try to solve ....and in other side samsung kies say this device not supported and samsung smart switch says unsupported device so what is this ??both are made by samsung and this type of error faces many many users in the world and you can see a lots of video on you tube but there is no any appropriate answer
This move is absolutely against developers who try to use androids more than just what Samsung intends them to. Definitely not satisfied, it was my only way of recovery because my old backups don't work because of frequent updates.
Hey, got to this thread today, I'm just leaving my bit for other souls that come by... I had this same msg on my A9, tried the Smart Switch but no way... then I just started good and old Odin 3.13.3 and started the process: the device responded and accepted the flash !!!
FernandoK said:
Hey, got to this thread today, I'm just leaving my bit for other souls that come by... I had this same msg on my A9, tried the Smart Switch but no way... then I just started good and old Odin 3.13.3 and started the process: the device responded and accepted the flash !!!
Click to expand...
Click to collapse
Thanks!!!!, the same for an A50, SM-A505FN.
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Raisagvs said:
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Click to expand...
Click to collapse
Thanks,
this worked for me,
didn't know Odin still works
Raisagvs said:
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Click to expand...
Click to collapse
Can you teach me how to do that sir.
You can also try another Samsung application, if I remember correctly, many additional features have been added recently. https://www.huuq.net/samsung-flow-download-for-windows/