Related
Hi guys, sorry for asking this, I know it is probably mentioned but I have spent the last 2 hours in this forum for various interests, including my galaxy gear and my eyes are hurting right now...lol
So before I attempt something and make a mistake because I missed something, I figured I ask straight to the point...
I am on the latest 4.3 OTA update on my fido S4.
I am interested to possibly flash the Rom to another one that is clean (without all the stock apps) and gain access also to bluetooth tether which is right now not available through fido.
If, this is an option with another ROM (which I am hoping it is)
So is a ROM available ? That can be flashed over the latest update ?
I found some threads but they were referring to already rooted phones etc...I am just not sure where I stand with the latest update, so I would really appreciate some info.
Thanks.
I have a Fido S4 on MDJ(4.2.2). I rooted and unlocked(using RegionLock away). If I flash a newer rom will I see a significant speed difference or performance boost?
Thanks
TRoN
TRoN_1 said:
I have a Fido S4 on MDJ(4.2.2). I rooted and unlocked(using RegionLock away). If I flash a newer rom will I see a significant speed difference or performance boost?
Thanks
TRoN
Click to expand...
Click to collapse
I'm pretty sure you can not unlock phone using region lock away, but on MDJ you can with secret menu, provided you never updated to mg1. Besides 4.2.2 Fido and before, was not region locked at all.
Maybe now with 4.3 it is. Did not check and can't be bothered looking for European sim card.
To answer main question. No! If you factory reset phone you will, but that's only temporary, which is why newbies keep saying it's faster and better with every firmware.
Sent from my GT-I9505G
I am not the first to claim I unlocked with RegionLock away. I inserted a T-Mobile sim and a Bell sim, and it did not ask for an unlock code. Before I ran RegionLock away, when I inserted a T-Mobile sim, it did ask for unlock code. Also, many people say the secret menu unlock doesn't work for Fido and/or screws up something.
Oh, what's that formula for POST COUNTS and NEWBIES again?
Hey guys, checking in again...
Sorry for the question, don't want to be flamed but there are A LOT of posts about different versions and I really do not want to screw up.
So :
Canadian fido S4 on 4.3 over the air update. Can I still root ? Possible link to the correct method ?
Any ROM available that is clean and would re activate BT tethering ? Link if any ?
Sorry guys, I am not lazy, just dizzy reading all the threads and trying to short them out between versions...
A mistake would put me in worse situation and 2 simple answers from anyone that knows would be greatly appreciated.
Thanks again.
Hi I'm new have pity on me,
I have a phone that is new and doesn't appear on the list of devices on this forum. I would like to contribute to the effort to gain root on my phone. I would be willing to test anything that anyone writes for this device or alternatively if someone can give me some help getting started I would be happy to try writing my own.
My phone is a SAMSUNG GALAXY GRAND PRIME SM-G530W. [Contact me for link if you can't find one as I can't post links yet]
Android: 5.1.1
Kernel: 3.10.x
This is not supported by any of the models listed on CF-Auto-Root @ [Contact me for link] nor apparently anywhere else on the internet. This is a different model and should not be confused with the SM-G530H or SM-G5306W or anything else.
I have the original firmware acquired from [Contact me for link] and can restore as necessary. I don't care about warranty, I've probably already voided it. As I am a beginner if there is some kind of safety that I might trip and completely wreck my phone please tell me .
I am happy to provide any and all additional info.
Thanks
Update
Rooted using http://forum.xda-developers.com/grand-prime/development/kernel-root-root-sm-g530t-5-1-1-t3203476 see post https://forum.xda-developers.com/showpost.php?p=63176348&postcount=15. #LongLiveRoot
Hi, your particular variant, the G530W is of interest to the community due to 5.1.1. Okay, for us to help you out we need hardware specs and all. So go to play store and download this app called Samsung Phone Info and open it. Post screenshots of all the information pages shown there, especially Hardware. Once we know your hardware the community can suggest root solutions to you.
To take a screenshot you can hold power and home key at once.
Thank you and awaiting the screenshots.
Similar thread is located here http://forum.xda-developers.com/grand-prime/general/rooting-sm-g530t-t3166031
This one is a G530T (TMO)
Screenshots from SM-G530W
Ok. I thiiink I found the right program? "Phone INFO *Samsung*" by vnduguyen.
Ok I'm having trouble posting these. I can't post links so just highlight and copy them into the url bar (the spacing deletes automagically). This is a preview of the general info:
htt
p://w
ww.filedropper.com/generalsm-g530winfo1
Package containing a .zip of the rest of the files:
htt
p://w
ww.filedropper.com/sm-g530wphoneinfo
Hope that works!
Nonta72 said:
Similar thread is located here http://forum.xda-developers.com/grand-prime/general/rooting-sm-g530t-t3166031
This one is a G530T (TMO)
Click to expand...
Click to collapse
OK. I'll follow that thread too and see if I can apply anything from it. I think I have an original firmware already though. Don't know if it is the same thing they are trying to get for the G530T though ... it's and .md5 file for odin.
See the link I can't post by deleting the spaces:
htt
p://ww
w.sammobile.com/firmwares/download/52458/G530WVLU1AOF9_G530WOYA1AOF9_ESK/
klondikemarlen said:
OK. I'll follow that thread too and see if I can apply anything from it. I think I have an original firmware already though. Don't know if it is the same thing they are trying to get for the G530T though ... it's and .md5 file for odin.
See the link I can't post by deleting the spaces:
htt
p://ww
w.sammobile.com/firmwares/download/52458/G530WVLU1AOF9_G530WOYA1AOF9_ESK/
Click to expand...
Click to collapse
I know, the G530W is probably sprint or Verizon version of the device.
I'm trying to port this firmware to G530H and F models
@klondikemarlen
Please check your personal message.
Nonta72 said:
I know, the G530W is probably sprint or Verizon version of the device.
I'm trying to port this firmware to G530H and F models
Click to expand...
Click to collapse
I am using Eastlink (in Canada). So if it is Sprint or Verizon ... I can neither confirm nor deny The firmware page does list about 10 different providers. Don't know which it would have come from first though.
Enlighten me oh Guru of the Smartphone rooting realm.
Nonta72 said:
Similar thread is located here http://forum.xda-developers.com/grand-prime/general/rooting-sm-g530t-t3166031
This one is a G530T (TMO)
Click to expand...
Click to collapse
Since I'm new to this ... how are these two threads similar? I am asking this in all seriousness and noobishness.
klondikemarlen said:
Since I'm new to this ... how are these two threads similar? I am asking this in all seriousness and noobishness.
Click to expand...
Click to collapse
The other one is also serious.
You should stop blaming. Cause diplicating or posting similar threads without event searching is against forum rules.
Nonta72 said:
The other one is also serious.
You should stop blaming. Cause diplicating or posting similar threads without event searching is against forum rules.
Click to expand...
Click to collapse
Hi Nonta. My apologies for the misunderstanding. I realize that these two threads must be similar because you know more than me and you have stated that they are similar. I simply have no idea how they are similar and would like to know if you have the time to enlighten me. I understand that this may be like trying to explain the colour blue to a blind man but I hope that you will take the time. I did search to find similar threads but I didn't find anything that made sense as similar to me.
Thanks,
Marlen
klondikemarlen said:
Hi Nonta. My apologies for the misunderstanding. I realize that these two threads must be similar because you know more than me and you have stated that they are similar. I simply have no idea how they are similar and would like to know if you have the time to enlighten me. I understand that this may be like trying to explain the colour blue to a blind man but I hope that you will take the time. I did search to find similar threads but I didn't find anything that made sense as similar to me.
Thanks,
Marlen
Click to expand...
Click to collapse
No problem,
The fact that makes both threads similar is that both are talking about "Rooting a model of Grand Prime on Lollipop".
Neither SM-G530T nor SM-G530W are supported by CF-Root.
I'm working on this since long time, but I don't have the device and that slows down my development on the phone.
Take a look at this http://forum.xda-developers.com/note5/general/verizon-att-samsung-note-5-knox-root-t3183641 the Note 5 and S6 Edge + have Lollipop 5.1.1 and it looks like rooting the Verizon and AT&T versions on them is likely impossible (at least right now).
Keep an eye on this thread, if they come with a workaround, you probably can root yours using this same workaround.
Cool! I didn't realize that rooting was Android version specific. I though it had more to do with the hardware. I'll follow the link you mentioned. If you have anything you would like to try I am happy to test out for you.
Keep us Posted!
As I am looking for the solution to this device, Galaxy Grand Prime Sm-G530W CAD version.
I am sure others are watching this post, I've been watching and I've been watching the added linked post's with no really understanding of how the other post's relate to this one besides of course figuring out Lollipop 5.1.1.
I have the understanding that rooting these systems entails bypassing KNOX and the Bootloader. Now considering the OS version is as important as the Knox, without figuring out how to root these there won't be a solution to this device. With this device, it is important to have the proper version for the SM-G530W or the phone can be Bricked.
Please keep us up-to-date with this forum, as I'm sure others are searching for the same solution on how to root these phones. It's horrible having this as my new phone and not able to access my root features.
Hey y'all,
kernel-root-root-sm-g530t-5-1-1-t3203476
This did root my SM-G530W but I am not certain if there are any security concerns etc. Is the code safe, compromised, sending data to ISIS ?
Maybe someone out there can dissect etc and confirm the safety of this kernel mod?
But it certainly DID root the SM-G530W and yes that is a W
P.S. Sorry ShinySide for expressing my uncertainty over the security of your kernel mod. I spoke before I realized that you are a senior member and have contributed greatly to the cause. I encourage others to Donate so ShinySide can continue helping us with these things. :fingers-crossed:
I tried it and it worked. I did have to do an extra battery take out restart.
You can successfully root SM-G530W with kingroot. THIS WILL NOT TRIP KNOX!!!!!
Only downside is that you can not use SuperSu. You are forced to use their Kingroot program.
I happened to root with kingroot and when I rebooted my phone, KNOX/bootloader detected the su binaries and refused to boot, so I had to re-image my phone. use with extreme caution. using Bell Canada version of Samsung G530W
CobaltChris said:
I happened to root with kingroot and when I rebooted my phone, KNOX/bootloader detected the su binaries and refused to boot, so I had to re-image my phone. use with extreme caution. using Bell Canada version of Samsung G530W
Click to expand...
Click to collapse
Did you enable OEM unlocking?
This is de autoroot for g530w 5.1.1 LMY47X.G530WVLU1AOFB by Chainfire, but i have problems with this becouse has security problems, the first time i root my g530w and the unlock with z3x i lost network, and i dont know why, please dont root with this, same problem with g530t kernel, dont try. you have been advice
I'm not very tech savvy, but rooting this model (S7 Edge SM-935A) seems to be hard according to what I have found. I would like to root it and get rid of all the bloatware and try a custom ROM, but don't want to mess things up. Can anyone point me in the right direction? Thanks very much for any info.
I have an AT&T S7 Edge and wanted to get rid of the bloatware also. I installed this ROM and all is working great. I didn't root device but I have no bloatware. It also get's OTA updates quick.
Samsung SM-935U firmware install guide on SM-935A device
Hope this helps....
skua123 said:
I'm not very tech savvy, but rooting this model (S7 Edge SM-935A) seems to be hard according to what I have found. I would like to root it and get rid of all the bloatware and try a custom ROM, but don't want to mess things up. Can anyone point me in the right direction? Thanks very much for any info.
Click to expand...
Click to collapse
Not really difficult. Need a special version of odin, modded by someone who goes by the alias Prince Comey. Then must rught click on the exe file in winblowz and select 'run as administrator'.
The non-modded versions will error out and won't complete the flashing process. Must be careful, and be sure that you are are flashing the correct files for your particular phone. I rooted my AT&T S7 Edge by flashing just one file.
The trickiest part is finding the files for your variant, whether it's AT&T, Verizon, or other. Also must install the usb driver for Samsung and the adb driver, both on your windows computer.
Sent from my LG-D851 using XDA-Developers Legacy app
Text Message Recovery on S7 Edge (AT&T)
I have an AT&T Samsung S7 Edge (smg935a). I think I need to root mine so I can undelete my text messages. If I am headed in the right direction, can you provide links to the special Odin version and file you flashed?
I'm in the same boat and I think this is the link that leads to the Odin you want.
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
OK I've read thru tons of old how to's .
I have a SM-G935A WITH android 8.0.0 ,Samsung experience version :9.0 baseband :g935auc4cre4 ,kernel : 3.18.71.13527040
I want root to remove bloatware from this device , How to do this ? Thanks
memturbo said:
OK I've read thru tons of old how to's .
I have a SM-G935A WITH android 8.0.0 ,Samsung experience version :9.0 baseband :g935auc4cre4 ,kernel : 3.18.71.13527040
I want root to remove bloatware from this device , How to do this ? Thanks
Click to expand...
Click to collapse
There is no engineering bootloader available for Oreo yet, so you will have to drop back to Nougat. From there, you can either go with AT&T firmware or the Unlocked firmware, depending on how badly you want WiFi calling and VoLTE. (If you aren't an AT&T customer, this is a really easy call).
Just going with the U firmware will remove the vast majority of the bloat right out of the box. You can root it and get the rest, but I haven't found it to be worth the effort, as the U firmware is pretty good as it is.
Good afternoon, I need your help to install TWRP and be ROOT in my samsung galaxy s7 edge model SM-G935A version AT and T with OREO ANDROID and processor QUALCOMM (hero2qlteuc) (G935AUCS4CRG5), there are tutorials on YOUTUBE for other models, but when you apply them in this model you stay blocked the ODIN when trying to install the TWRP, I can help you, if you know something you can write to me whatsapp +57 3004386706 Jorge Gonzalez
Thank you
jorge.gonzalez said:
Good afternoon, I need your help to install TWRP and be ROOT in my samsung galaxy s7 edge model SM-G935A version AT and T with OREO ANDROID and processor QUALCOMM (hero2qlteuc) (G935AUCS4CRG5), there are tutorials on YOUTUBE for other models, but when you apply them in this model you stay blocked the ODIN when trying to install the TWRP, I can help you, if you know something you can write to me whatsapp +57 3004386706 Jorge Gonzalez
Thank you
Click to expand...
Click to collapse
Samsung S7 edge and S7 flat variants do not allow TWRP to remain installed upon rebooting. There are ways to still root with it however. I found a post on X.D.A. that states SM-G935A ( AT&T variant of the 7s Edge ) runs fine after flashing the SM-G935U firmware. I had flashed it without issues myself, however I never tested it before running across the comboRom that I was originally looking for. Just place all 5 files in the correct positions ( BL,AP,CP,CSC,USER) of Odin. If Odin is only allowing you to 4 spots to flash. You need to use a different version of Odin. I used the "patched" version of Odin. Unsure if that is one and the same as the prince version.
S7 Edge while 'rooted' at least by the way I had rooted them. Runs very very HOT and lags to the point of annoyance.
So if you 'think' you need to root your phone. Make sure you need to first and fore most because was a back and forth headache to root. make changes, then unroot. then test. then root again. then test agian, then unroot.. etc.
https://forum.xda-developers.com/verizon-s7-edge/development/easyroot-unroot-t3859762
that link is for bootloader V4 to root.
When flashing SU make sure you use the system version and not the system-less version if you follow the instructions for OREO (Android version 8 ). The instructions I originally followed never stated that aspect and I had gone in circles for an hour until i discovered the problem.
Verizon variant had a few different ways to root/un-root, with different walk-thrus of which I 'think' would work with different carriers. Just instead of using the S935V firmware, You would just need to use your carriers firmware while flashing it with Odin but I could be wrong so please double check the comments of whichever way you choose to root your phone for someone else with similar question/concerns as yours.
If you had been using your phone after the messages were deleted ( especially if its been awhile since you deleted them ) then you are likely S.O.L. However if it's worth the time spent for you to try, then it's worth the effort to try.
SofaSpud said:
Not really difficult. Need a special version of odin, modded by someone who goes by the alias Prince Comey. Then must rught click on the exe file in winblowz and select 'run as administrator'.
The non-modded versions will error out and won't complete the flashing process. Must be careful, and be sure that you are are flashing the correct files for your particular phone. I rooted my AT&T S7 Edge by flashing just one file.
The trickiest part is finding the files for your variant, whether it's AT&T, Verizon, or other. Also must install the usb driver for Samsung and the adb driver, both on your windows computer.
Click to expand...
Click to collapse
I have also a s7 edge at&t(SM G935A ,where can i find the whrite files To avoid error....
Thank you.......
Sent from my Samsung SAMSUNG-SM-G935A using XDA Labs
Declanick said:
Samsung S7 edge and S7 flat variants do not allow TWRP to remain installed upon rebooting. There are ways to still root with it however. I found a post on X.D.A. that states SM-G935A ( AT&T variant of the 7s Edge ) runs fine after flashing the SM-G935U firmware. I had flashed it without issues myself, however I never tested it before running across the comboRom that I was originally looking for. Just place all 5 files in the correct positions ( BL,AP,CP,CSC,USER) of Odin. If Odin is only allowing you to 4 spots to flash. You need to use a different version of Odin. I used the "patched" version of Odin. Unsure if that is one and the same as the prince version.
S7 Edge while 'rooted' at least by the way I had rooted them. Runs very very HOT and lags to the point of annoyance.
So if you 'think' you need to root your phone. Make sure you need to first and fore most because was a back and forth headache to root. make changes, then unroot. then test. then root again. then test agian, then unroot.. etc.
https://forum.xda-developers.com/verizon-s7-edge/development/easyroot-unroot-t3859762
that link is for bootloader V4 to root.
When flashing SU make sure you use the system version and not the system-less version if you follow the instructions for OREO (Android version 8 ). The instructions I originally followed never stated that aspect and I had gone in circles for an hour until i discovered the problem.
Verizon variant had a few different ways to root/un-root, with different walk-thrus of which I 'think' would work with different carriers. Just instead of using the S935V firmware, You would just need to use your carriers firmware while flashing it with Odin but I could be wrong so please double check the comments of whichever way you choose to root your phone for someone else with similar question/concerns as yours.
If you had been using your phone after the messages were deleted ( especially if its been awhile since you deleted them ) then you are likely S.O.L. However if it's worth the time spent for you to try, then it's worth the effort to try.
Click to expand...
Click to collapse
Will someone, anyone help me figure out how to root my galaxy s7 its through at&t? When i say i have no idea how, i mean it, and ive bricked a phone last time i tried so id really appreciate some help
---------- Post added at 09:16 AM ---------- Previous post was at 08:59 AM ----------
Will someone, anyone help me figure out how to root my galaxy s7 its through at&t? When i say i have no idea how, i mean it, and ive bricked a phone last time i tried so id really appreciate some help!
Reply on here or text me 7406883229
itstanner740 said:
Will someone, anyone help me figure out how to root my galaxy s7 its through at&t? When i say i have no idea how, i mean it, and ive bricked a phone last time i tried so id really appreciate some help
---------- Post added at 09:16 AM ---------- Previous post was at 08:59 AM ----------
Will someone, anyone help me figure out how to root my galaxy s7 its through at&t? When i say i have no idea how, i mean it, and ive bricked a phone last time i tried so id really appreciate some help!
Reply on here or text me 7406883229
Click to expand...
Click to collapse
This thread is only 1 page long with 10 previous posts before yours. Out of those 10 posts, 3-4 of them describes what you're seeking...
Guessing you saw the threads title and bcuz of that you clicked on it and asked your question. Did it ever dawn on you that your question is nearly identical to the title of this thread? This is how forums work, if a threads subject is similar to the subject that you're interested in then, the thread may contain your answer. Next, is where quite a few folks seem to really struggle, sort of like yourself but it's ok, everyone was new once. This is where you'd want to pay close attention, really concentrate and use every bit of brain power to focus on this next step. I'm going to reiterate, just in case I lost ya: You just located a thread that it's title is very similar to a question that you have (you did a good job searching & your instincts to click/open it are on point, well done). A threads title tells you that the discussion(s) inside there relate to that topic. Upon opening the thread, you'll see rectangles vertically aligned, when members add thoughts or ideas to the topic, they're separated by the rectangles. They're arranged in chronological order the top being the first, the most recent or latest entry being the bottom. And thats how forums like this one and many others work. Pretty simple idea, I think, yet its highly effective.
Now, with this knowledge, Im sure your already 10 steps ahead of me, but I'll mention anyway for anyone else. To fully utilize the resourceful contents here, as it contains vast amounts of invaluable info, one must simply READ and COMPREHEND info that pertains to the subject that brought you here. That means reading (& understanding what you just read), each one of the posts inside the threads. No really, it really is that simple! Unless your device is new, theres likely someone who already asked your question or someone already posted a set of instructions describing the task youre needing. You can test this theory with this same thread youve commented in.
Amazing isn't it? By now, you've probably already figured it out and concluded that posting your message which mirrors the first one here wasn't necessary, nor was including your phone number.. If it wasnt already obvious, you're the lone outcast whom shared their number on a public forum. Most of us here, refrain from such similar activity, since the forum has option to directly contact members via the internal private messaging system. Some highly value their privacy and anonymity. But I cant decide for you, obviously you're comfortable with it.
......
@Talysdaddy
So that was the most condescensing, egotistical, and just blatantly rude response I have ever seen given on this site.. I promise you, I have a very impressive ability to retain knowledge, but considering I was on this site in the first place due to the fact that I have never been interested in, or ever even attempted to mess with my phone before in any type of way, I am slightly uneducated on this PARTICULAR topic. However, that IS NOT because i lack the ability to learn, comprehend and/or retain information, understood?
It is due to the fact that I have never sat down and educated myself on it.. WHICH BY THE WAY, is WHY I'm on this site in the first place, you know that IS the entire PURPOSE of this site? ....
You see how that works? .. Let me break it down for you! Pay close attention and try to follow me and actually comprehend what I am saying! (if you're able to, that is). ANYWAYS, as I was saying, I CAME TO THIS SITE TO TRY TO EDUCATE MYSELF on something I NEEDED to educated on! ALSO to be able to interact with other people, and ask those people questions! To be able to recieve responses from those people, in order to obtain the information THAT I CAME HERE FOR! WHICH BY THE WAY, IS EXACTLY WHAT THIS SITE IS SUPPOSED TO BE USED FOR! Hopefully I have yet to lose you, because this is the most important part! Let's try to read this next part, and actually try and COMPREHEND and UNDERSTAND what I'm saying. I CAME HERE TO USE THIS WEBSITE IN THE EXACT WAY THAT IT IS MEANT TO BE USED! .. To be able to share information! To exchange information! And to obtain information that I am not privy to or an expert on prior to visiting the site!! .. If I was educated on these things I WOULD NOT BE HERE!! Obviously! Soooooo, instead of being an arrogant and cocky JERK, do EVERYONE on this site a huge FAVOR, and next time NOT leave such a RUDE, SMART COMMENT!! Thanks!
P.S. isn't it funny how just from that comment, I could tell you exactly what you look like, the life you live, how insecure you are in yourself, and how you deal with that by trying to belittle others, in an attempt to make yourself feel superior.. BUT, and yes, there is a BUT!! Just because you might know more about this topic than myself, absolutely does not make you ANY more intelligent than myself.. Because I promise, anybody who leaves the response that you left, when I am using the site for its specific purpose in the first place, welllll... let's just say anyone who would do that, and who would do it to boost their superiority complex as a defense to their pathetic insecurities, well, let's just say I would bet my life on the fact that my IQ would make yours look SORT OF like you TRIED to make me look and feel when you left that comment
That's all, hope you find something better to do with your time than this in the future.. it is kind of sad! If you're not here to help, then don't comment! That goes for everyone's posts! Jerk.
Hi all! Newbie here.
This has been asked before but I need to confirm a few things.
So I just bought a used LG V20 here in the Middle East but only later realized that it is an AT&T unlocked device. I have attached a screenshot of my device software info. It has all the bloatware and is running Nougat December 2016 patch.
I read that AT&T OTA updates can only be received if it the device has the AT&T sim connected to servers in the USA. I want my device to run the original stock ROM by LG and not a carrier one as such.
I searched around and came across this thread which seems to be the closest situation as mine;
https://forum.xda-developers.com/v20/help/remove-att-rom-to-att-stock-rom-t3809173
Considering that I'm not a techie but I can run things with guidelines and the software version on my device is H91010l;
Question 1) Can I just follow the method Brian has mentioned in the thread or is there anything extra that needs to be done? I've read that some devices are blocked to have different firmwares loaded onto them.
Question 2) What kind of backup needs to be taken? I don't have any data on this phone yet so I have nothing to lose but I don't know how to take backups of system files if that's required. A guide on that would be helpful!
Apologies for the long post and repeated questions, but software help here in the Middle East is limited so I don't want to put myself into any trouble with a bricked phone.
Thanks in advance!
Just follow Brian's instructions. You don't have to root if that's what you would like to know.
Just an #FYI, before some "Senior" member gets on your case, you may want to use the search option in the LG V20 forum, as well as the search option within the threads.
Use keywords, such as "H910 to us996 no root." If you use Google search, you can use something like, "H910 to us996 xda." You're going to have to read a lot, compare information on threads, look up videos on YouTube, but know that if language seems to be a barrier, you can ask. And don't be intimidated with some jerks on here. There are plenty of experienced and knowledgeable folks on this forum...but you also have to do your part in research and troubleshooting.
I'm terribly sorry to inconvenience anyone but I have a very special and specific request. Could someone please real-time walk me through updating my OP6t to latest most stable. I originally bought a "unlocked" variant but to my surprise it was TMobile. So I did some unlock and international variant upgrade myself. That being said I'm currently on international version 9.0.17. I have rooted my phone as well. Now here's the interesting part. I did in fact root and have magisk blah blah. I am fairly certain when flashing both a and b I did something wrong. I'm not certain. Long story short, as I can further explain to whomever would be of help, I just want to start over. I want to start fresh and get my updates. But I want and need to do it right. I'm worried I'll mess it up. I realize there are pages and pages of dedicated guides. I have read them. Re-read. Still confusing.
someone please help
BoSavageYo said:
I'm terribly sorry to inconvenience anyone but I have a very special and specific request. Could someone please real-time walk me through updating my OP6t to latest most stable. I originally bought a "unlocked" variant but to my surprise it was TMobile. So I did some unlock and international variant upgrade myself. That being said I'm currently on international version 9.0.17. I have rooted my phone as well. Now here's the interesting part. I did in fact root and have magisk blah blah. I am fairly certain when flashing both a and b I did something wrong. I'm not certain. Long story short, as I can further explain to whomever would be of help, I just want to start over. I want to start fresh and get my updates. But I want and need to do it right. I'm worried I'll mess it up. I realize there are pages and pages of dedicated guides. I have read them. Re-read. Still confusing.
someone please help
Click to expand...
Click to collapse
Use the msmdownload tool. By the way, if you have further queries like these, post them in the questions and answers section.