I've looked around and couldn't find the exact thread to where I can go back to factory stock.
EDIT: Now it's soft bricked.... great
Someone please help.
It's unlocked and rooted, but I have seemed to clear out the OS so now it won't load past the Google screen. I've tried everything, but adb won't recognize my nexus 10. And I am on Windows 8.
Are you able to go into recovery
Have you done a backup , maybe you can do a restore
Press power + volume
On my last flash , I had the same problem, and I was able to at least reload
The backup, reread the instruction (went on you tube , and tried again from
Scratch (redownloaded both ROM and gapps) , I think I did factory reset
Wipe cache and Dalvilk, and installed ROM and Gapps, rebooted system...
Sent from my Nexus 10 using xda app-developers app
what rom you have when you softbricked it? are you able to boot into recovery? always do a nandroid back up or you will be screwed.
Related
First, I searched and read all relevant threads concerning this issue. The five threads that showed up in the search did not help me solve my issue.
So on to my problem. I can no longer flash any rom onto my device. I attempted to flash the first official CM10 nightly (which I recently found out was not flashing properly for others) and had no success. I simply got a black screen and nothing more. I eventually got back into TWRP (v2.2.1.4) to try and Nandroid restore, but I noticed that /data was not formatting and the restore failed. Every time I would slide the bar across to confirm the restore TWRP would reboot itself. I then flashed CWM (v6.0.1.0) and the same problems were there. After that I flashed an earlier version of TWRP and successfully restored the backup. I'm not 100% sure how it was successful. So I decided to try flashing another ROM and no go. Same problems. Anyone have any ideas? When I was using CWM I got the error message below.
Code:
E: unable to locate volume information
E: unable to open ums lunfile '/sys/devices/platform/usb_mass_storage/lun0/file'
E: unable to format data
I'm running Bugless Beast with Motley #219
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
aznxk3vi17 said:
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
What rom did you attempt to flash?
elementur said:
What rom did you attempt to flash?
Click to expand...
Click to collapse
So do I.I attempted to flash the first official CM10 8.18 nightly and had no success. I just got a black screen.Even more I boot into bootloader and choose to boot into recover but just stay at google logo.I try to flash recover once more,but just can't boot into recover!!
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Shano56 said:
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Click to expand...
Click to collapse
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
phiracle said:
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
Click to expand...
Click to collapse
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
android1234567 said:
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
Click to expand...
Click to collapse
Thank You Very Much!!!
I am having much the same problem as the OP. I finally rooted my Nexus 7 using WugFresh's Nexus Root Toolkit. It seemed all went well. I chose to use TWRP in a first attempt to install a ROM (I was on rooted stock), and following the instructions for installing my chosen ROM I went into it to wipe cache, Dalvic Cache and data. Both cache and dalvic cache wiped without issue, but when I attempted to wipe /data TWRP simply reported that it failed. With that failing, I did not attempt to install a rom. I was still able to boot out of recovery, but even with repeated attempts wiping data always failed. Is any one aware of any solution or have any suggestions. Thank you!
I attempted to flash a Liquid Smooth rom yesterday. I rebooted into the bootloader, and chose recovery mode. I wiped all cache, then installed the zip. I followed this by installing the gapps zip immediately, which I think I shouldn't have done.
When I rebooted it, it was stuck on the liquid smooth screen for a while, I know this is normal, but when it sat there for an hour and fifteen minutes I knew something was wrong. If I hold down both volume keys and the power button I can reboot into the bootloader again, but when I now choose recovery mode, it gets stuck on the google load screen.
Can anybody help me out?
danlk2 said:
I attempted to flash a Liquid Smooth rom yesterday. I rebooted into the bootloader, and chose recovery mode. I wiped all cache, then installed the zip. I followed this by installing the gapps zip immediately, which I think I shouldn't have done.
When I rebooted it, it was stuck on the liquid smooth screen for a while, I know this is normal, but when it sat there for an hour and fifteen minutes I knew something was wrong. If I hold down both volume keys and the power button I can reboot into the bootloader again, but when I now choose recovery mode, it gets stuck on the google load screen.
Can anybody help me out?
Click to expand...
Click to collapse
Plug the N7 into your PC before you boot into the bootloader.
You were correct to flash gapps immediately after flashing the ROM. Maybe the ROM didn't flash correctly because you only wiped caches. If you are coming from a different ROM you will need to do a factory reset. If you didn't back up your apps and don't have a nandroid, then you might want to wipe caches, format system, and reflash the previous ROM and try to boot in and backup your apps. Might not work but worth a shot if you got stuck where you are now with no app backups.
irishrally said:
Plug the N7 into your PC before you boot into the bootloader.
You were correct to flash gapps immediately after flashing the ROM. Maybe the ROM didn't flash correctly because you only wiped caches. If you are coming from a different ROM you will need to do a factory reset. If you didn't back up your apps and don't have a nandroid, then you might want to wipe caches, format system, and reflash the previous ROM and try to boot in and backup your apps. Might not work but worth a shot if you got stuck where you are now with no app backups.
Click to expand...
Click to collapse
Wow, that didn't even cross my mind, I did this and I've got the rom up and running now. Thanks a lot.
Ok do I did search first but can't find anyone with the same problem.
Started with stock 4.3 rooted, unlocked,TWRP.
Got the update notification, told it to update. It auto rebooted to TWRP and applied the update with no error. When it was done (assuming it was done progress bar finished) it went to the main TWRP menu. I told it to reboot and it just sits at the new 4.3 splash screen animation. I assumed it may take a bit so I let it sit for about 20min with no change. Rebooted it a couple times, also tried applying the update again via twrp (errors out as i woukd expect). Wiped dalvik and cache. Didn't do a factory wipe because I'd like to avoid that but still no change.
Any suggestions? Should I manually load the full 4.4 package via TWRP?
Thanks!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Same exact setup... Say exact issue... Oh and before rebooting I wiped Dalvik and Cache as "Sandard Operating Proceedure" ... I'm going to just do a clean flash at this point....
Tracy
Hi
I have the same problem. had a rooted 4.3, and after the update the screens remains on the splash thing. restarted a couple of times, did wipe data, factory reset, and it still remains stuck at the boot. What should i do. pls help
step944 said:
I have the same problem. had a rooted 4.3, and after the update the screens remains on the splash thing. restarted a couple of times, did wipe data, factory reset, and it still remains stuck at the boot. What should i do. pls help
Click to expand...
Click to collapse
Prior to the installation of the OTA it is safer to re-install stock recovery. Root is lost but re-installing a custom recovery and SuperSu bring back root.
gunner1937 said:
Prior to the installation of the OTA it is safer to re-install stock recovery. Root is lost but re-installing a custom recovery and SuperSu bring back root.
Click to expand...
Click to collapse
How can i install stock recovery?
You *could* unzip the factory image and then fastboot the recovery.img file. A lot easier is to download the wugfresh nexus root toolkit and use that:
http://www.wugfresh.com/
ty, but do u think it works, because i cant open my nexus 10 memory from the pc, since it is stuck at start up
Wug's toolkit has an option to restore to stock from a bricked system. All you need to be able to do is to get to the bootloader (press the power button while holding down both volume buttons -- you should get a dead android with a red triangle on chest).
To make a long story short, after unlocking bootloader and rooting a friend of mine thought it would be a GREAT idea to install Layers on a stock ROM... after that my phone goes black after the Motorola screen. Ended up wiping the OS off the phone and didn't have a chance to do a nandroid backup... I can get into TWRP just fine... is there anyway to get this thing working again... btw i tried the WIndows Tool with no success and tried it on a Mac with Terminal with no luck... Any ideas?
What exactly have you tried so far. The solution to issues like this is typically to get hold of a factory system image and ADB reflash the system partition while in fastboot mode.
See this post http://forum.xda-developers.com/showpost.php?p=63074207&postcount=89
The same happened to me and I if you are able to boot into TWRP, then you can follow the exact steps to re-flash the image files and be able to restore to factory stock.
i flashed a cm based rom didnt like it so i tried restore a backup but twrp starts the does a partition update and kicks me out of twrp so i cant flash anything. i tried factory reset using button combo it says android starting loads to 100% but never boots up . how can i fix this ?
Have you tried to oem relock then unlock again? It will wipe your phone. I was on the wrong version of twrp(should be at least rc 8) and got a twrp bootloop and had to send bavk to lg. Hopefully not the case for you too.
It was a bad twrp beta 4 kept updating partition and bootlooping
Sent from my LG-H918 using Tapatalk