Database Users

Un-root CDMA Hero (Sprint)

I have an HTC Hero running Fresh 0.7 with the two-part patch applied. I would like to un-root the phone if at all possible. I have attempted using the RUU utility, but received an error code 170 when I ran it. The error indicates a USB connection issue, but the phone is definitely plugged in and has all drivers installed (I have the SDK and ADB drivers installed).
Can anyone give me a hand restoring my phone? Any help is greatly appreciated.

try booting into fastboot mode (hold vol up and power on) then run the RUU utility. This method has saved me at one point!

saved me too! I got into a pickle when i flashed a cyanogen 6 rom. The rom worked but for some reason my sdcard would not mount, keep getting
E: can't mount /dev/block/mmcblk0
p1 (or /dev/block/mmcblk0)
so then i tried fastboot and made sure usb was connected ( fastboot devices )
and still had problems.... fastboot failed, remote: not allow .. so after a couple of days reading forums i tried running my phone in fastboot usb ( made sure was connected through command on pc ) then ran Hero_C_Sprint_2.27.651.5_R_2.1update.exe utility and Bam! Loaded up back into stock. haven't had any problems and my sdcard works again

Fastboot mode has always worked for me. (Volume UP + Power On)

i have a question, i am taking my phone back to sprint today and if i just flash the RUU will it be fine, or will i have to unroot it??

xxxk15 said:
i have a question, i am taking my phone back to sprint today and if i just flash the RUU will it be fine, or will i have to unroot it??
Click to expand...
Click to collapse
ruu will unroot it.

Whick one should i flash or should i use fastboot and run hboot??

like would this RUU work??
http://forum.xda-developers.com/showthread.php?t=804692

xxxk15 said:
like would this RUU work??
http://forum.xda-developers.com/showthread.php?t=804692
Click to expand...
Click to collapse
Looks good to me. that's what I used.

ok and sorry about all of the questions but i have one more... do i flash it in recovery or do i do something eles with it in like fastboot??

aiwetir said:
Looks good to me. that's what I used.
Click to expand...
Click to collapse
ok and sorry about all of the questions but i have one more... do i flash it in recovery or do i do something eles with it in like fastboot??

xxxk15 said:
ok and sorry about all of the questions but i have one more... do i flash it in recovery or do i do something eles with it in like fastboot??
Click to expand...
Click to collapse
it's right there in the thread you linked to.
1. Simply rename this to HERCIMG.zip and place on the root of your SDCard.
2. Power your phone completely off.
3. Press and Hold VOL DOWN and POWER until your phone boots into HBoot mode.
4. Wait for it to verify the zip, then click <ACTION> (Trackball) to update, or <SEND> (Green Call) to cancel.
Click to expand...
Click to collapse

If your running Windows 7 and get error 170 just exit out of the program, unplug, plug it in and rerun the program. That's what worked for me.
Sent from my HERO200 using XDA Premium App

[Q] [i9505G] Rooting GE S4?

**Update**
ivanoterra and myself have both used CF-Auto Root on our GE S4's and we both can confirm that it has worked.
this is the file we used: http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
**update 2**
More good news, I flashed TWRP using Odin and it worked! TWRP found here: http://www.teamw.in/project/twrp2/182
**OP below **
Hi folks,
Just got my GE S4 this morning. So far it's awesome. The only problem is that I'm so eager to root this phone and I cannot find any information on how to do it. Any ideas? I'm doubting it's as simple as just using the same method as the regular S4's, but I could easily be wrong.
Also, any information on whether there will be a sub-forum for the GE phones?
Thanks!

Same here
Im on the same road...

bscotth said:
Hi folks,
Just got my GE S4 this morning. So far it's awesome. The only problem is that I'm so eager to root this phone and I cannot find any information on how to do it. Any ideas? I'm doubting it's as simple as just using the same method as the regular S4's, but I could easily be wrong.
Also, any information on whether there will be a sub-forum for the GE phones?
Thanks!
Click to expand...
Click to collapse
What happens when you put the device in download mode? (Volume Down + Home + Power buttons on start up)

tublah said:
What happens when you put the device in download mode? (Volume Down + Home + Power buttons on start up)
Click to expand...
Click to collapse
Attached is a picture of the download mode screen.
The text in the top left corner says:
ODIN MODE
PRODUCT NAME: GT-I9505G
CURRENT BINARY: Samsung Official
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable

Did you try Auto Root ? Im getting close to trying it....
Just did a Auto Root... IT WORKED...
I used this one http://forum.xda-developers.com/showthread.php?t=2219803
The app asked for root and i was able to allow it...

bscotth said:
Attached is a picture of the download mode screen.
The text in the top left corner says:
ODIN MODE
PRODUCT NAME: GT-I9505G
CURRENT BINARY: Samsung Official
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
Click to expand...
Click to collapse
I think we'll have to wait for a custom recovery before we can root, methinks.
If you're feeling saucy, you can try 'fastboot oem unlock' and see what that does? (Warning: it may wipe your device, it does for my nexus 10)
EDIT: Looks like auto-root does fastboot oem unlock if you're not unlocked.

ivanoterra said:
Did you try Auto Root ? Im getting close to trying it....
Just did a Auto Root... IT WORKED...
I used this one http://forum.xda-developers.com/showthread.php?t=2219803
The app asked for root and i was able to allow it...
Click to expand...
Click to collapse
which version did you use? The T-Mobile one or the international one?

This
bscotth said:
which version did you use? The T-Mobile one or the international one?
Click to expand...
Click to collapse
http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
This one....

ivanoterra said:
http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
This one....
Click to expand...
Click to collapse
Sweet! What happens when you go into download mode now? Does it show custom binary counter, or does it still show official?

ivanoterra said:
http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
This one....
Click to expand...
Click to collapse
Thanks! Here goes nothing...

tublah said:
Sweet! What happens when you go into download mode now? Does it show custom binary counter, or does it still show official?
Click to expand...
Click to collapse
Ill try that in a moment... Its recovering my apps... Its like 250 apps.. Its on 32%...
But i guess it wont show as custom, GE edition has a Unlocked Bootloader. It was made to be custom rom friendly....
Even if it counts... It wont matter... Probably a counter reseter will solve it...

Didn't work.
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."

ivanoterra said:
Ill try that in a moment... Its recovering my apps... Its like 250 apps.. Its on 32%...
But i guess it wont show as custom, GE edition has a Unlocked Bootloader. It was made to be custom rom friendly....
Even if it counts... It wont matter... Probably a counter reseter will solve it...
Click to expand...
Click to collapse
That was going to be my next question - whether Triangle Away works - again, it should, since this is supposed to be identical to GT-i9505...
Sorry for all the Q's. I'm waiting on my device to ship.

bscotth said:
Didn't work.
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
Click to expand...
Click to collapse
Nooooo... You dont know how to flash ?
read the instructions there:
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
(KILL ALL KIES PROCESSES... Before proceding...)
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
tublah said:
That was going to be my next question - whether Triangle Away works - again, it should, since this is supposed to be identical to GT-i9505...
Sorry for all the Q's. I'm waiting on my device to ship.
Click to expand...
Click to collapse
Its ok... but im not sure about all of that... 70%... just 30% more

ivanoterra said:
Nooooo... You dont know how to flash ?
read the instructions there:
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
(KILL ALL KIES PROCESSES... Before proceding...)
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
Its ok... but im not sure about all of that... 70%... just 30% more
Click to expand...
Click to collapse
I know how. I've done it many times before this. While flashing, odin crashed. :crying:

Is it possible to flash the GE firmware on the international version? If yes does anyone have a guide?

Okay, it worked. Thought my phone was bricked. I used a different version of Odin and it stopped crashing and worked.
I can now confirm that Auto Root works on the GE S4!

Download mode shows that I'm on a custom binary now. It still says "Write Protection: Enable"
I'm curious to find out what that means. The bootloader is already unlocked. I wonder if a certain partition is locked.
I guess the next question to answer is: Can we use the same recoveries as the i9505? I hope so..

bscotth said:
Download mode shows that I'm on a custom binary now. It still says "Write Protection: Enable"
I'm curious to find out what that means. The bootloader is already unlocked. I wonder if a certain partition is locked.
Click to expand...
Click to collapse
Would you be willing to try out Triangle Away to see if it'll reset the custom binary counter? I also wonder if you do fastboot oem unlock if it'll turn off write protection?

tublah said:
Would you be willing to try out Triangle Away to see if it'll reset the custom binary counter? I also wonder if you do fastboot oem unlock if it'll turn off write protection?
Click to expand...
Click to collapse
I might be wrong but I don't think download mode supports fastboot. Either that, or I'm doing something wrong. With my phone in download mode and my S4 connected, the command "fastboot devices" doesn't show any devices, but when I plug my N4 in, it shows up. Is there a special fastboot mode that is different from download mode?

[Q] L01F no download mode, no usb reading.

Hello. Please help me. I have a Japanese version of G2 (L-01F - DoCoMo) and i tried to flash an european version of kitkat because i couldn't update in OTA. Now the phone is bricked, it is bootlooping, the Download Mode doesn't work, it shows a few of blue dots and it stays there (the phone can't be recognized on PC using the USB cable). I can enter the Recovery Mode (the grey screen with LG logo) where the phone can be read by PC and using ADB tool is shown as "recovery". I can't use fastboot.exe because the device is not being recognized. What can i do? Thank you very much. 

unkn0wn68 said:
Hello. Please help me. I have a Japanese version of G2 (L-01F - DoCoMo) and i tried to flash an european version of kitkat because i couldn't update in OTA. Now the phone is bricked, it is bootlooping, the Download Mode doesn't work, it shows a few of blue dots and it stays there (the phone can't be recognized on PC using the USB cable). I can enter the Recovery Mode (the grey screen with LG logo) where the phone can be read by PC and using ADB tool is shown as "recovery". I can't use fastboot.exe because the device is not being recognized. What can i do? Thank you very much. 
Click to expand...
Click to collapse
Can someone help me please ?

unkn0wn68 said:
Can someone help me please ?
Click to expand...
Click to collapse
I have the same problem. Please tell me if you can fix it.
http://forum.xda-developers.com/lg-g2/help/device-conecting-to-pc-download-mode-t2996249

ronen1n said:
I have the same problem. Please tell me if you can fix it.
http://forum.xda-developers.com/lg-g2/help/device-conecting-to-pc-download-mode-t2996249
Click to expand...
Click to collapse
Actually i'm trying to repair it since October 2014. No-one knows the solution. I went to 3 different GSM Services and they don't know what to do...
So...when i'm trying to put it in download mode it stays like this and the PC doesn't recognize it.
The only way to connect the phone to the computer is to put it in recovery mode (Backup & Restore) by holding Volume Up and Power Button at the same time with the phone turned off. It should appear something like this. The PC recognizes the phone but only in ADB. Look.
The third possible screen, which also is useless is this by typing in the CMD the following: "adb reboot recovery" (click). Here, the PC doesn't recognize the phone too.
Fastboot doesn't work.
And that's my problem. I don't know what to do.

unkn0wn68 said:
The PC recognizes the phone but only in ADB. Look.
Click to expand...
Click to collapse
If there are any custom roms that will run on your phone, adb push it to the sdcard and flash in TWRP.

iowabowtech said:
If there are any custom roms that will run on your phone, adb push it to the sdcard and flash in TWRP.
Click to expand...
Click to collapse
I have permission problems...

unkn0wn68 said:
I have permission problems...
Click to expand...
Click to collapse
?
Your screenshot above shows the device being recognized via adb in recovery. What permission problems?

Need Help!! my sm-n9005 can't access to recovery and bootloop with 2 vibrations

Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.

rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?

devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen

rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.

devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.

rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817

rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?

devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.

Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.

rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging

cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.

rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.

devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.

rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.

devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved

rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .

[HELP] LG Spirit H440N cannot access to Download mode

Hi everyone, i have a big problem. Today i was trying to help a firend of mine by unlocking his bootloader on this phone but i got a strange message when i was trying to boot in Download mode. The message was:
"fastboot init( )
loading keystore failed status 5 usb init ept @ 0x8f20700
udc_start( )
fastboot: processing commands"
Basically it doesn't allowed me to enter in Download mode, so no reverting to v10f software, no pushing aboot, no twrp and no Marshmallow zip. Nothing at all, i could do nothing. In the following lines i will tell you what i did and tried:
1) Using different PC usb ports, no way to make it work
2) Using different cables, no way to make it work
3) Trying to boot in Download mode by removing battery and try without it, desperate, obviously no way to make it work
I spent two hours trying to find a way to make it work but i failed miserably...so i'm here hoping someone better than me can help me.
NOTES:
The phone was on original Lollipop firmware v10e (Italy) but rooted.
Basically i did nothing, just tried to put it in download mode (Vol - and plug usb in), tried also other ways but nothing showed up
When the phone is connected to pc (when it's on) it charges only, don't show the option to use mtp so... i think adb won't work
Hope it can help and hope you can help! XD

I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk

MadjijaHacker said:
I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
But i need Download mode, not recovery. With adb i can access it?
P.S i didn't flash anything

Well, that's what helped me, i don't know was that helpful, you can still try repair mode
Giuskiller said:
But i need Download mode, not recovery. With adb i can access it?
P.S i didn't flash anything
Click to expand...
Click to collapse
Sent from my LG-H440 using Tapatalk

Giuskiller said:
Hi everyone, i have a big problem. Today i was trying to help a firend of mine by unlocking his bootloader on this phone but i got a strange message when i was trying to boot in Download mode. The message was:
"fastboot init( )
loading keystore failed status 5 usb init ept @ 0x8f20700
udc_start( )
fastboot: processing commands"
...
NOTES:
The phone was on original Lollipop firmware v10e (Italy) but rooted.
Basically i did nothing, just tried to put it in download mode (Vol - and plug usb in), tried also other ways but nothing showed up
...
Hope it can help and hope you can help! XD
Click to expand...
Click to collapse
Upload mode is phone off, press VOL+ and then plug the USB.
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
MadjijaHacker said:
I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
Can you give more details? How can I access that repair mode and how to use adb commands on it? I have a bricked board that I want to put back on use.

jorlando said:
Upload mode is phone off, press VOL+ and then plug the USB
Click to expand...
Click to collapse
Hi, i tried vol + but the phone just boots... i will try again and let you know in the evening

When device is off hold Vol- and power key until LG logo appear, then release the keys and hold them again, its really hard to time it correctly, but if you do you will get a factory reset option, on that screen you navigate using Vol+ and - buttons and power button is ok
Sent from my LG-H440 using Tapatalk

MadjijaHacker said:
When device is off hold Vol- and power key until LG logo appear, then release the keys and hold them again, its really hard to time it correctly, but if you do you will get a factory reset option, on that screen you navigate using Vol+ and - buttons and power button is ok
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
Thank you, after the factory reset the combination Vol+ and USB worked (after a few try) and i was able to boot in Download mode, then i flashev v10f, rooted and pushed modified aboot, flashed twrp 1.1.0 with flashify (twrp official app failed many times) and finally installed v20b and supersu. Everything works as expected =)

Giuskiller said:
Thank you, after the factory reset the combination Vol+ and USB worked (after a few try) and i was able to boot in Download mode, then i flashev v10f, rooted and pushed modified aboot, flashed twrp 1.1.0 with flashify (twrp official app failed many times) and finally installed v20b and supersu. Everything works as expected =)
Click to expand...
Click to collapse
I am glad i could help [emoji2]
Sent from my LG-H440 using Tapatalk

oh man same problem if u fix this let me now how plzzzzzzz

Silentsx1 said:
oh man same problem if u fix this let me now how plzzzzzzz
Click to expand...
Click to collapse
Is there anything you can do on your phone or is it completely dead ?

I can enter the hardrester but itis not helping and in fastboot itis saying FAILED (remote: unknown command)

Silentsx1 said:
I can enter the hardrester but itis not helping and in fastboot itis saying FAILED (remote: unknown command)
Click to expand...
Click to collapse
Try to boot into download mode, if you can. Turn off your device then press and hold vol. Up and plug in the cable.

i cant turn off my device legit after i put battery fastboot show up :crying::crying::crying::crying:

Silentsx1 said:
i cant turn off my device legit after i put battery fastboot show up :crying::crying::crying::crying:
Click to expand...
Click to collapse
Can you post a screenshot here ?

here i cant do anything plz help
https://ibb.co/kmZCmG
https://ibb.co/eMB3tw
https://ibb.co/mQsMfb
https://ibb.co/dpf7Lb

Silentsx1 said:
here i cant do anything plz help
https://ibb.co/kmZCmG
https://ibb.co/eMB3tw
https://ibb.co/mQsMfb
https://ibb.co/dpf7Lb
Click to expand...
Click to collapse
Do you have twrp installed on your phone ? If, yes try to boot into it.

I have a similar problem with my LG Spirit. When it tries to boot, it shows an error message: Boot Verification Fail, DIFFERENT_HASH... After that it just restarts endlessly... I can't enter download mode, because the computer doesn't recognize it when I plug it in via usb cable... The only thing I can do is to get to the hard reset screen, but that is useless because it just restarts and shows the same error mentioned above... I'm out of ideas, the only thing that comes to my mind is to try and see if Ubuntu recognizes it, but then again, there's no LG Flash Tool made for Linux, or is there?
Sorry for mistakes, english is not my native language.

Hrastostit said:
I have a similar problem with my LG Spirit. When it tries to boot, it shows an error message: Boot Verification Fail, DIFFERENT_HASH... After that it just restarts endlessly... I can't enter download mode, because the computer doesn't recognize it when I plug it in via usb cable... The only thing I can do is to get to the hard reset screen, but that is useless because it just restarts and shows the same error mentioned above... I'm out of ideas, the only thing that comes to my mind is to try and see if Ubuntu recognizes it, but then again, there's no LG Flash Tool made for Linux, or is there?
Sorry for mistakes, english is not my native language.
Click to expand...
Click to collapse
If your pc doesn't recognise it, try to find an another computer that you can try it on .

mayankjet said:
If your pc doesn't recognise it, try to find an another computer that you can try it on .
Click to expand...
Click to collapse
Thank's for your reply. I did just that, but without success... I also tried to do what MadjijaHacker wrote, but I can't get it right. I mean, I can enter in hard reset, but can't get to download mode. It seems that my phone is dead...