Motorola X no calling - Droid X General

Hi,
I bought unloked motorola droid X to be used here in india and it worked fine till i tried to update the firmware and root it ,(i was on .621) though i have rooted and came to .604. But now I am not able to make a call ???? I thought i have messed up PRL which I tried updated with my network here in india but that also did not helped me at all , (using qpst)
now i am at conclusion that it is something related to firmware may be not , i am also not able to boot in to clock recovery mode (power+down vol)
have any body faces such problem ?
or because of wrong update i have locked my phone again ? but is connect to my home network reliance and says your phone is already active
i am in this mess from last 10 days and want to solve this on my own

Related

[Q] not rooted lg gt540 official update fail messed phone up help please

hi peeps, this is my 2nd phone i messed up this week lol, thought i would plug the phone in to laptop and see if there was any official updates for it as it was on 2.1 and ive never tried to root this phone (yet) any way said there was an update so i started it going and it lost connection and crashed so searched for hours on the net how to get the phone back up and running after it bricked and downloaded kdz update software, had trouble to get it to flash phone but it did it and i thought every thing worked again till i noticed that the phones signal is full and shows my network provider but i cant make any calls out and cant receive any same with text messaging but and this is strange i can use the internet on it and i dont mean connecting through wifi, ive tried to re flash it through kdz updater and keep getting this launching SW update, unpacking KDZ, KDZ file extraced, extract file error ===FINISHED===
so i have no idea why its doing that worked before, also get problems some times with keeping the phone connected to laptop and installed windows 7 drivers and disabled the phones modem driver
i have also phoned my network and asked them if theres a problem and they tried to phone the phone and couldnt work out the problem as the imei is not blocked and is still present on the phone which hasnt been changed by flashing it so have no clue whats wrong. if any body has an idea please get in touch
any body please. is there a way to flash original settings to phone like i did with flashtool for my se xperia x8 after i had a similar problem after messing with roms and did the same till i reflashed with original settings
donnypaul said:
any body please. is there a way to flash original settings to phone like i did with flashtool for my se xperia x8 after i had a similar problem after messing with roms and did the same till i reflashed with original settings
Click to expand...
Click to collapse
So you are on 2.1 now? Or still 1.6?
Sent from my GT540
hi thanks for reply, im on 2.1 update 1, still have the problem with phone as well
just wondering if i have locked phone to another network with messing about with it as the imei is showing as unblocked by network provider ?
donnypaul said:
hi thanks for reply, im on 2.1 update 1, still have the problem with phone as well
Click to expand...
Click to collapse
try a full wipe ( factory reset)
go to settings > security > factory reset
still wont work. if this info helps kernel version 2.6.29 [email protected] #1 Fri Oct 15 12:47:03 EDT 2010
Software version
GT540-V20b-OCT-15-2010
the phone was an unlocked carphone warehouse phone running on o2 network in the uk, unable to return phone as warrenty ran out etc, many people have had problems with the lg update and bricked phone like i did after it failed half way through it but i used kdz updater to get it up and running again but having problem with it making and reciving calls and texts but it is able to use internet through o2 network. i have got a few kdz files to try re flashing it with them but kdz updater starts to extract file then gives an error now but didnt before, saying that my laptop needs a clean out as well full of crap from messing with phones

[q] cant find gsm network / emergency calls only all after ota update?

my girlfriend has a razr m.....she had me do the radiocomm nv edit about a month ago and everything has been fine with her Family mobile plan......this morning i guess she did a OTA update and now it wont make calls or use the internet or anything......anyone know whats going on or if this can be fixed?
You need to redo the NV edit with RadioComm because the update overwrote the the NVM when it flashed the new modem firmware.
Just repeat the process exactly as you did before and it should all work again.
thanks for the reply....i will try that and let you know if it works

No sound on phone anymore - Solved

so I spent yesterday trying to get my bell Galaxy s4 unlocked so I can use it on rogers
when I got the phone I updated to 4.3 right away not knowing the issues it would give me
after trying long and various roms I decided to flash stock 4.2.2 thru odin
my phone went from 4.3 on i337vlluemk6 baseband to 4.2.2 on i337mvluamdj baseband
I was then left with a new issue....... I now couldn't enable wifi
so I flashed another rom and wifi was able to be enabled no problem(did not change baseband)
to my surprise I was able to unlock the phone successfully now using region lock away.
"VICTORY IS MINE!" I proclaimed
until I noticed something................I now have no sound coming out of my phone. I tried another rom and still no sound.....so I flashed stock thru odin once again. Again the wifi doesn't work and there's still no sound
anyone know what might cause this or how I can fix it? Phone isn't of much use to me if I can't hear it lo
Edit: thru scouring google I was finally able to find a solution on here. Apparently I just had to reflash stock 4.3 and it now works
another thing
even though the phone is unlocked I 'm not able to dial out on it
doing so caused the phone to lock up
this happens in stock as well as 2 roms I tried
the data connection works just fine and I'm able to browse the web with my LTE
I dunno if this helps anyone but if I go in to service mode I can't even select audio as an option.
It's there (number 5) but if I choose it it does nothing
Same issue
I have the exact same issue. I was trying to get to Google Play Edition which I have done many time before, but this time the baseband version changed. Now I also have no sound, so wifi and my phone is locking up when I make or receive calls. HEEELLLPPP!!!!

Network not registered issue

Hi Guys,
I am writing this Thread believing that I will get a solution as Yota company has not provided any solution after 15 days trouble shooting. I just brought the phone from Russian seller through eBay.com to India and after 2 months of fight from the local customs office I just got my phone. I was very happy and was floating in air to have the first dual screen phone in my hand. The phone was flawless with dual screen was working awesome. The phone came with lollipop update. I switched on the phone with out inserting the simcard, the phone prompted for a small 350 MB update and I just update the phone. Then I just inserted the Simcard after which i started facing issue. The issue was the phone is able to read and shoe the service provider name but there was no network signal and it was showing only emergency calls. When i tried to make calls it showed network no registered. I tried with different simcard which resulted in the same issue. I though it might be a simcard issue and checked with my old phone but there was no simcard issue. So i just contacted the Yota tech team through mail to help me on this issue. They asked me do some basic troubleshooting but there was no use after 15 days they asked me to ship the phone to nearest service center which is in Russia. The issue is to and back from Russia customs will cost me the price of 2 Yotaphone fist generation phone price. So I through of resolving this issue myself and researched in online. I found that Samsung phones were also facing the same issue after update and tried all the solutions given in internet but there was no use. Finally there was a solution asking to root the phone and install the ariza patch which would solve the issue. I just rooted my phone and when I installed the ariza it showed it was not compilable for yotaphone 2. I just searched in XDA forums and could not find anyone reporting the similar issue with a solution. So I through of creating new thread in hope of getting a solution in this issue. Please help me in this issue by creating a patch or any solution which will me help me out of this. I am not able to use the phone as the basic call function is not even working reset the phone is a heaven.:crying::crying::crying:
bharath9962 said:
Hi Guys,
I am writing this Thread believing that I will get a solution as Yota company has not provided any solution after 15 days trouble shooting. I just brought the phone from Russian seller through eBay.com to India and after 2 months of fight from the local customs office I just got my phone. I was very happy and was floating in air to have the first dual screen phone in my hand. The phone was flawless with dual screen was working awesome. The phone came with lollipop update. I switched on the phone with out inserting the simcard, the phone prompted for a small 350 MB update and I just update the phone. Then I just inserted the Simcard after which i started facing issue. The issue was the phone is able to read and shoe the service provider name but there was no network signal and it was showing only emergency calls. When i tried to make calls it showed network no registered. I tried with different simcard which resulted in the same issue. I though it might be a simcard issue and checked with my old phone but there was no simcard issue. So i just contacted the Yota tech team through mail to help me on this issue. They asked me do some basic troubleshooting but there was no use after 15 days they asked me to ship the phone to nearest service center which is in Russia. The issue is to and back from Russia customs will cost me the price of 2 Yotaphone fist generation phone price. So I through of resolving this issue myself and researched in online. I found that Samsung phones were also facing the same issue after update and tried all the solutions given in internet but there was no use. Finally there was a solution asking to root the phone and install the ariza patch which would solve the issue. I just rooted my phone and when I installed the ariza it showed it was not compilable for yotaphone 2. I just searched in XDA forums and could not find anyone reporting the similar issue with a solution. So I through of creating new thread in hope of getting a solution in this issue. Please help me in this issue by creating a patch or any solution which will me help me out of this. I am not able to use the phone as the basic call function is not even working reset the phone is a heaven.:crying::crying::crying:
Click to expand...
Click to collapse
Do you still have this problem?
I wasn't sure at first, I thought it was my sim card, but I have tried 2 different networks sims and they both get no signal in my Yotaphone 2...
The network's name does appear, so the sim must be being read somewhat, but I always get no signal.
I literally have no idea what to do.
I too turned the phone on without a simcard, flashed the RU latest rom, flashed TWRP, rooted it etc, surely that has nothing to do with it...?
@bharath9962 ! I fixed it!
I have no idea why this happened, and I spent a few hours trying to fix it, very angry. I downgraded to 4.4 to see if it would help, put back the native China rom that came with my phone (accidentally deleted my backup too...)
I bought a new sim card just for this phone because the old one did not 'work'.
This is not a popular phone so it's hard to find information, anyway... I'm very relieved now. I can only imagine you gave up...
I found the answer here - thewichitacomputerguy.com/blog/how-i-fixed-your-sim-card-does-not-allow-connection-network-g1
1. Open the phone dialer
2. Enter: *#*#4636#*#* (Once entered, you will be taken directly to a "Testing" page) [4636 spells INFO]
3. Tap Phone Information
4. Scroll to the bottom of the screen and you should see a button that says radio off. Hit this button and when it reads radio on Hit it again to turn the radio back on. <-- (Not a Typo)
I rebooted and waited a few seconds, no signal. I turned on airplane mode, turned it off, and it worked!
Now I can go back to RU 1.99 and reinstall all my stuff...
cbcbcvcc said:
@bharath9962 ! I fixed it!
I have no idea why this happened, and I spent a few hours trying to fix it, very angry. I downgraded to 4.4 to see if it would help, put back the native China rom that came with my phone (accidentally deleted my backup too...)
I bought a new sim card just for this phone because the old one did not 'work'.
This is not a popular phone so it's hard to find information, anyway... I'm very relieved now. I can only imagine you gave up...
I found the answer here - thewichitacomputerguy.com/blog/how-i-fixed-your-sim-card-does-not-allow-connection-network-g1
1. Open the phone dialer
2. Enter: *#*#4636#*#* (Once entered, you will be taken directly to a "Testing" page) [4636 spells INFO]
3. Tap Phone Information
4. Scroll to the bottom of the screen and you should see a button that says radio off. Hit this button and when it reads radio on Hit it again to turn the radio back on. <-- (Not a Typo)
I rebooted and waited a few seconds, no signal. I turned on airplane mode, turned it off, and it worked!
Now I can go back to RU 1.99 and reinstall all my stuff...
Click to expand...
Click to collapse
@cbcbcvcc may i know which country you are and what type of sim your using. So that i could check my issue accordingly.. And thanks for your reply tp my post as i waa waiting for some one to help for the last 3 months... When hope was vanishing you just showed up.. This help means a lot to me
bharath9962 said:
@cbcbcvcc may i know which country you are and what type of sim your using. So that i could check my issue accordingly.. And thanks for your reply tp my post as i waa waiting for some one to help for the last 3 months... When hope was vanishing you just showed up.. This help means a lot to me
Click to expand...
Click to collapse
My country is in Asia but I believe this does not matter - the problem was that somehow the radio (cell phone function) was 'off'/glitched, and had to be turned on+off to make the phone function again. Using a different country's sim card would not fix this problem.
As I wrote above, we both share the fact that we first turned our phones on with no sim, and updated. Maybe just a coincidence...
Just try the guide and please let me know if it is fixed!
cbcbcvcc said:
My country is in Asia but I believe this does not matter - the problem was that somehow the radio (cell phone function) was 'off'/glitched, and had to be turned on+off to make the phone function again. Using a different country's sim card would not fix this problem.
As I wrote above, we both share the fact that we first turned our phones on with no sim, and updated. Maybe just a coincidence...
Just try the guide and please let me know if it is fixed!
Click to expand...
Click to collapse
Hi cbcbcvcc,
Tried the guide but still no use, I also downgraded the ROM and tried the guide still no use. This is hurting me so bad.. Do you have any other way to resolve the issue please share with me.
No SIM CARD
Hi to All,
suddenly after I did a reset and change the sim card, the Yotaphone is no more recognize the sim card.
I try to install a new rom...nothing
I try to install the Kitkat rom...nothing
I try the method suggested here to use the code *#*#46..... nothing
any help please
Please I have tried the guidelines but the radio refuse to ON. I click on it but not never respond
Hello, I have update my Yotaphone and now I receive WCDMA, but no gsm/edge signal .
I change the Rom (lollipop,kitkat,, HK rom, EU Rom)but I have always the problem :
I receive H, H+. But no Edge/GSM...
Can you help me.
[SOLVED]
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
manu3556 said:
Hello, I have update my Yotaphone and now I receive WCDMA, but no gsm/edge signal .
I change the Rom (lollipop,kitkat,, HK rom, EU Rom)but I have always the problem :
I receive H, H+. But no Edge/GSM...
Can you help me.
Click to expand...
Click to collapse
good job deepmnd
thanks :good::good::good:
deepmnd said:
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
Click to expand...
Click to collapse
Hello!
I try to figure out what you did but I get stucked in number 10.
Actually I flashed my Yotaphone with the chinese radio the first time, but I don't get good connectivity.
Anyways I try to do what you wrote, but when I tipe the first line (first fastboot command), cmd keep saying waiting for the device... maybe is that I'm impatient but nothing happens.
I try other USB ports and nothing works...
So actually I don't know if I'm doing it right or if I have to wait for a longer period of time (10 minutes or more).
Any help would much appreciated.
Cheers!
Hi there,
you don't have ADB drivers installed. Google for "universal adb driver" and install. There is driver included with yota 5.0 firmware (C:\Program Files (x86)\yotaphone_flasher\Driver\Google), but any other adb driver should work as well.
And use original yota usb cable!!!
It shouldn't take more that a few seconds for those commands to execute.
MDans said:
Hello!
I try to figure out what you did but I get stucked in number 10.
Actually I flashed my Yotaphone with the chinese radio the first time, but I don't get good connectivity.
Anyways I try to do what you wrote, but when I tipe the first line (first fastboot command), cmd keep saying waiting for the device... maybe is that I'm impatient but nothing happens.
I try other USB ports and nothing works...
So actually I don't know if I'm doing it right or if I have to wait for a longer period of time (10 minutes or more).
Any help would much appreciated.
Cheers!
Click to expand...
Click to collapse
Had the same problem
Hi all, I had the same problem when I flashed russian firmware (YD201) over my phone which originally had honkong firmware (YD206).
I can inform that for me it also worked to flash the Chinese firware with yotaflasher.
However, when I tried to only flash the radio, it seemed it did not work. So I flashed the complete chinese kitkat firmware with yotaflasher and then afterward just removed/renamed the radio folder when flashing the newest russian lollipop firmware. Everything working great now, even was able to do some ota's without any problems since the ota's did not update anything of the radio img's.
And indeed you first need to make sure that you have the fastboot drivers installed and your device gets recognized as fastboot device by your PC.
You can test this by doing "fastboot devices". If you device turns up there as a fastboot devices, then the drivers and connection from pc to phone are ok.
Good Luck!
Thank you deepmnd and tomgaga.
Actually I had to activate developer options... And then reinstall the ADB cause, aparently I had it but it didn't work.
After that the instructions worked perfectly, but I still have network issues.
I don't know if it is because I have a MVNO (Mobile virtual network operator) and the phone has to change between the networks ( the one that provides the network and the MVNO).
I think that when it changes from one net to the other is when I lose connectivity and sometimes I have to search the network and choose it manually.
So this problem actually happened to me and the solution was to activate Roaming services (but I dont' know if is actually the same problem).
Anyways I can see that I connect to EDGE, HSPA/HSDPA and LTE.
For sure there is a way to monitor the network and check wich ones works.
Another guess is that being a phone for the chinese market, and the lack of the 900mhz band is causing this ¿?
So at the moment I'm losing signal just by walking on the street and I live in a big city. It seems that LTE and H works fine but I don't have a a way to assure this.
When I will have a spare time I will try to reflash the phone with the instructions deepmnd provided and see if it will work.
Thank you for your help!
Any advice will be appreciated!!
Update:
I try tomgaga approach I will test it just to see if is the network or my provider
Does anybody know which bands different firmwares support?
Reception is incredibly bad in my case (206 flashed with EU firmware).
It'd be nice if somebody has any info on unlocking different bands for yotaphone2.
kbal said:
Does anybody know which bands different firmwares support?
Reception is incredibly bad in my case (206 flashed with EU firmware).
It'd be nice if somebody has any info on unlocking different bands for yotaphone2.
Click to expand...
Click to collapse
Here you have the bands
https://www.frequencycheck.com/compare-devices/qkjseR/yota-yotaphone-2-yd201/yota-yotaphone-2-yd206
I have the same problem as you, I will try this weekend to downgrade to the older chinese rom and check if the reception get better.
And if then to the latest RU rom.
MDans said:
Here you have the bands
https://www.frequencycheck.com/compare-devices/qkjseR/yota-yotaphone-2-yd201/yota-yotaphone-2-yd206
I have the same problem as you, I will try this weekend to downgrade to the older chinese rom and check if the reception get better.
And if then to the latest RU rom.
Click to expand...
Click to collapse
Thanks for that, it helps a lot to clear the situation regarding the two models.
Now, taking in account deepmnd´s solution above, would it be possible to find those missing bands from the original 206 which are not available to the updated (and then international, 201-) version and add them individually, file by file via the fastboot flashing?
I followed deepmnd's instructions, and my phone now connects to GSM/EDGE, which was not possible before using the EU Radio (latest EU rom). Thanks for this!
Unfortunately it now preferably (!) connects to EDGE, although the LTE/WCDMA-Option is prioritized. I can force the phone to connect to WCDMA by using the WCDMA-only-option, but in this case it does not commit a fallback to EDGE if 3G is missing and I have no connectivity at all, unless I change the band-options and force a connect to EDGE. I'd like it to switch between the bands automatically, as my YD201 did without problems (in Germany).
Any hints to solve this problem?
Thanks in advance, Knut
deepmnd said:
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
Click to expand...
Click to collapse
Thank you! I had missed calls and did not know what caused them. Then I noticed this happened when I was not on LTE network but on WCDMA or 2G network. And this seems to have solved the issue for me as well.

After installing OTA 8.0 update My cellular network has stopped working.

I currently use my s7 flet G935FD in Brazil. The mobile did not perform updates via OTA since I acquired it (Android 6.0), I decided to install the 7.0 update by Odin and there were no problems. When performing the update android enabled an OTA update for Android 8.0 Oreo, I performed the automatic installation and in conclusion I noticed that the operator's cellular network had stopped working (when the problem started). I searched in various places about what happened, unfortunately without success and had considered some problem related to the IMEI of the device. When checking the IMEI situation there was no restriction and the mobile phone only recognizes 1 operator network. It has been 4 days since this occurred and has already detected more than 1 different operator, but always only 1 network at a time. I ask for help from someone who understands what might have happened when installing the OTA update and the network has stopped working, the phone is only on an emergency call. If possible tell me a step by step to solve the problem, I had flash of several roms of old handsets and it is the first time that I come across this type of problem. Thank you in advance and I apologize for bad english.

Categories

Resources