Related
This is strictly just a reference guide/tutorial! If you cannot simply follow directions and copy/paste, I'm not going to help you! This is idiot-proof.
Build Environment
Operating system -- Tested on Ubuntu 10.04 (64bit)
Terminal
Decent hardware (minimum of at least a dual core CPU and 4 GB of RAM)
Optimally have an SSD (standard mechanical drives work as well but slow down the process drastically)
Must have required packages for building installed, I will list them further down
Required Packages
Simply copy and paste this in a terminal window:
Code:
sudo apt-get install curl git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.6-dev squashfs-tools build-essential zip curl libncurses5-dev zlib1g-dev sun-java6-jdk pngcrush schedtool g++-multilib lib32z1-dev lib32ncurses5-dev lib32readline5-dev gcc-4.3-multilib g++-4.3-multilib
Let that install and then proceed.
Getting the Source
Make required directories
Obtain repo binary
Add repo binary to your path
Give repo binary proper permissions
Initialize empty repo
Sync repo
Grab device tree and vendor tree which are not included in the AOKP manifest
Add Mecha to the vendor setup
Alright, so now we're getting there. I have outlined the basics of what we're about to do and broke them down as I know them. This is all pretty much going to be copy/paste so it'll be fairly difficult to screw this up
Copy/paste:
Make directory for repo binary
Code:
mkdir ~/bin
Add directory for repo binary to your path
Code:
PATH=~/bin:$PATH
Download repo binary and place it in the proper directory
Code:
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
Give the repo binary the proper permissions
Code:
chmod a+x ~/bin/repo
Create directory for where the AOKP repo will be stored and synced
Code:
mkdir ~/aokp
Move to our new AOKP directory
Code:
cd ~/aokp
Initialize the AOKP repo and download the manifest
Code:
repo init -u git://github.com/AOKP/platform_manifest.git -b master
Sync AOKP source
Code:
repo sync -jX
X == Number of cores your CPU has
Grab the device tree needed for mecha
Code:
git clone git://github.com/ProTekk/device_htc_mecha.git -b aokp device/htc/mecha
Grab the vendor tree needed for mecha
Code:
git clone git://github.com/ProTekk/vendor_htc_mecha.git -b ics vendor/htc/mecha
Add mecha to the vendor setup
Code:
gedit vendor/aokp/vendorsetup.sh
Now here you'll have to do some "manual" work. At the end of the file add:
Code:
add_lunch_combo aokp_mecha-userdebug
Save and close the file.
Start the build
This is probably the EASIEST part of all, simply copy/paste this command and walk away!
Code:
. build/envsetup.sh && lunch aokp_mecha-userdebug && make otapackage -jX
Where X == cores per CPU again.
Syncing the repo is dependent upon your Internet connection. It can take anywhere from 30 minutes to several hours to fully sync. Same thing goes for build times. Don't expect this to be short. If you have patience and have no build errors, you'll end up with a flashable zip in ~/aokp/out/target/product/mecha! Happy crack-flashing!
Sorry I'm a noob so this is probably a really dumb question but r u supposed to have ur phone plugged into the computer while doing the terminal on Ubuntu???
Sent from my HTC Mecha using xda premium
Error on the first step
I'm interested in working on this (and hopfully learning a lot (because right now I know almost nothing)) - but on the first step, I get an error related to lib32zl-dev as follows:
[email protected]:~/Android ROMs/For Mecha/Archive$ sudo apt-get install curl git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.6-dev squashfs-tools build-essential zip curl libncurses5-dev zlib1g-dev sun-java6-jdk pngcrush schedtool g++-multilib lib32z1-dev lib32ncurses5-dev lib32readline5-dev gcc-4.3-multilib g++-4.3-multilib
[sudo] password for tadiv:
Reading package lists... Done
Building dependency tree
Reading state information... Done
gnupg is already the newest version.
zip is already the newest version.
E: Couldn't find package lib32z1-dev
Any suggestions?
Thanks,
Tom
Since we have an official version of ICS now. Does the github have the updated stuffs so we can have a fully working build? I want this as I'm getting tired of sense.
Thanks for posting this ProTekk! I'd like to get this working as well, so maybe some Linux heads can chime in on the errors I'm getting after trying to install the required packages:
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package lib32readline5-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
lib32readline-gplv2-dev
Package sun-java6-jdk is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'sun-java6-jdk' has no installation candidate
E: Package 'lib32readline5-dev' has no installation candidate
E: Unable to locate package gcc-4.3-multilib
E: Couldn't find any package by regex 'gcc-4.3-multilib'
E: Unable to locate package g++-4.3-multilib
E: Couldn't find any package by regex 'g++-4.3-multilib'
raphytaffy said:
Thanks for posting this ProTekk! I'd like to get this working as well, so maybe some Linux heads can chime in on the errors I'm getting after trying to install the required packages:
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package lib32readline5-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
lib32readline-gplv2-dev
Package sun-java6-jdk is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'sun-java6-jdk' has no installation candidate
E: Package 'lib32readline5-dev' has no installation candidate
E: Unable to locate package gcc-4.3-multilib
E: Couldn't find any package by regex 'gcc-4.3-multilib'
E: Unable to locate package g++-4.3-multilib
E: Couldn't find any package by regex 'g++-4.3-multilib'
Click to expand...
Click to collapse
You don't have jdk 6 installed or any of the kernel tools you need.
Sent from my ADR6400L using Tapatalk 2
raphytaffy said:
Thanks for posting this ProTekk! I'd like to get this working as well, so maybe some Linux heads can chime in on the errors I'm getting after trying to install the required packages:
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package lib32readline5-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
lib32readline-gplv2-dev
Package sun-java6-jdk is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'sun-java6-jdk' has no installation candidate
E: Package 'lib32readline5-dev' has no installation candidate
E: Unable to locate package gcc-4.3-multilib
E: Couldn't find any package by regex 'gcc-4.3-multilib'
E: Unable to locate package g++-4.3-multilib
E: Couldn't find any package by regex 'g++-4.3-multilib'
Click to expand...
Click to collapse
I am following this as well, this seems to be an old document because a lot of the links are dead. What I did for the libs is:
(excluding the others that are required)
sudo apt-get install gcc-4.6-multilib g++-4.6-multilib lib32z1-dev lib32ncurses5-dev lib32readline-gplv2-dev
And I plan to grab the Java SDK from Oracle's website.
That is exactly what you have to do prior to building from source.
Sent from my ADR6400L using Tapatalk 2
ViperZ28 said:
I am following this as well, this seems to be an old document because a lot of the links are dead. What I did for the libs is:
(excluding the others that are required)
sudo apt-get install gcc-4.6-multilib g++-4.6-multilib lib32z1-dev lib32ncurses5-dev lib32readline-gplv2-dev
And I plan to grab the Java SDK from Oracle's website.
Click to expand...
Click to collapse
Thanks for this tip. I've installed the updated libs that you suggested, then installed the OpenJDK using:
Code:
sudo apt-get install openjdk-6-jdk
Is OpenJDK okay to use or is there a specific need for Sun Java JDK? I found the link for the JDK here: https://help.ubuntu.com/community/Java
Now that the updated libs and the JDK were installed properly, I ran the command that ProTekk posted minus the previously installed libs:
Code:
sudo apt-get install curl git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.6-dev squashfs-tools build-essential zip curl libncurses5-dev zlib1g-dev pngcrush schedtool g++-multilib
Everything installed properly. Just wanted to check if I'm now ready to build the source or if there's anything else I need to do beforehand.
http://forum.xda-developers.com/showthread.php?t=1920107
Here is a good guide getting java and all setup right to build from source. Of course don't use the git stuff just the java setup.
I don't think his mecha stuff is on there anymore. Could be wrong.
Sent from my Z0mbi3 ADR6425LVW using xda app-developers app
tburns said:
http://forum.xda-developers.com/showthread.php?t=1920107
Here is a good guide getting java and all setup right to build from source. Of course don't use the git stuff just the java setup.
I don't think his mecha stuff is on there anymore. Could be wrong.
Sent from my Z0mbi3 ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Getting this error now:
Code:
repo init -u git://github.com/AOKP/platform_manifest.git -b master
error: revision master in manifests not found
raphytaffy said:
Getting this error now:
Code:
repo init -u git://github.com/AOKP/platform_manifest.git -b master
error: revision master in manifests not found
Click to expand...
Click to collapse
it's been updated... the new repo init is:
Code:
repo init -u https://github.com/AOKP/platform_manifest.git -b jb-mr1
The device tree i don't think is there anymore.
You need that to compile.
je2854 said:
it's been updated... the new repo init is:
Code:
repo init -u https://github.com/AOKP/platform_manifest.git -b jb-mr1
Click to expand...
Click to collapse
this is the updated specifics for the mecha
Code:
git clone git://github.com/CoolSilver/device_htc_mecha -b aokp device/htc/mecha
this is the updated vendor for the mecha
Code:
git clone git://github.com/ProTekk/vendor_htc_mecha.git -b ics vendor/htc/mecha
after the HARD WORK finding the updates everything else compiles correctly.
It took a LONG time to figure out the new links....
je2854 said:
this is the updated specifics for the mecha
Code:
git clone git://github.com/CoolSilver/device_htc_mecha -b aokp device/htc/mecha
this is the updated vendor for the mecha
Code:
git clone git://github.com/ProTekk/vendor_htc_mecha.git -b ics vendor/htc/mecha
after the HARD WORK finding the updates everything else compiles correctly.
It took a LONG time to figure out the new links....
Click to expand...
Click to collapse
Nice.
Also found these last night
https://github.com/ThePlayground
Some more stuff to play with..
Working?
So, after much digging and coding ... screenshot?
Does it run, do you have phone and data...?
Code:
including device/asus/grouper/vendorsetup.sh
including device/asus/tilapia/vendorsetup.sh
including device/generic/armv7-a-neon/vendorsetup.sh
including device/generic/armv7-a/vendorsetup.sh
including device/generic/mips/vendorsetup.sh
including device/generic/x86/vendorsetup.sh
including device/htc/mecha/vendorsetup.sh
including device/lge/mako/vendorsetup.sh
including device/samsung/maguro/vendorsetup.sh
including device/samsung/manta/vendorsetup.sh
including device/samsung/toroplus/vendorsetup.sh
including device/samsung/toro/vendorsetup.sh
including device/ti/panda/vendorsetup.sh
including vendor/aokp/vendorsetup.sh
including vendor/htc/mecha/vendorsetup.sh
including sdk/bash_completion/adb.bash
ls: cannot access vendor/aokp/products/mecha.mk: No such file or directory
build/core/product_config.mk:234: *** Can not locate config makefile for product "aokp_mecha". Stop.
** Don't have a product spec for: 'aokp_mecha'
** Do you have the right repo manifest?
This is what I get after attempting the actual build.
Also this is what I get with the following command.
Code:
~/aokp$ git clone git://github.com/ProTekk/vendor_htc_mecha.git -b ics vendor/htc/mecha
Cloning into 'vendor/htc/mecha'...
fatal: remote error:
Repository not found.
But I changed ProTekk to CoolSilver and it appeared to work fine. Anyone still attempting this that might be able to help?
I'm not sure what level of involvement any of you are interested in, but I'm currently working on porting CM9 to the Thunderbolt with sources at https://github.com/jblack248. Of course, it's not incorporated into the AOKP build process although that shouldn't be too difficult since it's probably just an additional makefile (an assumption).
Currently the RIL is being difficult with mobile data, but calling and SMS work using CM's HTC RIL. It's not ready for a release just yet, but I thought I'd give a shout to all of you since I see you're trying to build from source. Hopefully I can help in some way; the Thunderbolt forum could use some positive excitement.
The gitt link a few posts above is for the jellybean branch hence the -b jb for the AOKP git clone. Try -b ics
Ill take a look at the cm9 stuff tomorrow. Need to partition more HD space to Linux.
onedementedsmurf said:
Code:
including device/asus/grouper/vendorsetup.sh
including device/asus/tilapia/vendorsetup.sh
including device/generic/armv7-a-neon/vendorsetup.sh
including device/generic/armv7-a/vendorsetup.sh
including device/generic/mips/vendorsetup.sh
including device/generic/x86/vendorsetup.sh
including device/htc/mecha/vendorsetup.sh
including device/lge/mako/vendorsetup.sh
including device/samsung/maguro/vendorsetup.sh
including device/samsung/manta/vendorsetup.sh
including device/samsung/toroplus/vendorsetup.sh
including device/samsung/toro/vendorsetup.sh
including device/ti/panda/vendorsetup.sh
including vendor/aokp/vendorsetup.sh
including vendor/htc/mecha/vendorsetup.sh
including sdk/bash_completion/adb.bash
ls: cannot access vendor/aokp/products/mecha.mk: No such file or directory
build/core/product_config.mk:234: *** Can not locate config makefile for product "aokp_mecha". Stop.
** Don't have a product spec for: 'aokp_mecha'
** Do you have the right repo manifest?
This is what I get after attempting the actual build.
Also this is what I get with the following command.
Code:
~/aokp$ git clone git://github.com/ProTekk/vendor_htc_mecha.git -b ics vendor/htc/mecha
Cloning into 'vendor/htc/mecha'...
fatal: remote error:
Repository not found.
But I changed ProTekk to CoolSilver and it appeared to work fine. Anyone still attempting this that might be able to help?
Click to expand...
Click to collapse
I have been trying to figure this out as well. Any help would be appreciated.
The purpose of this guide is to show the steps required to compile CM9 specifically for the Thunderbolt. This may be adapted for other ROMs in the future. However, I will not describe how to setup your development environment as that information changes based on distribution versions and has been done many times over. A few good references are here, with an example of mine at the end of this post:
CyanogenMod Wiki - Learning to Build CyanogenMod
CyanogenMod Build Guide for Nexus 7 (Use as an example)
My goal is to aid others in development as the steps to get everything working on the Thunderbolt are not straight-forward unless you know what they are. Even though I had plenty of sources when I started, I still had to spend many hours to get them working. The camera and radio need some extra steps, but those are now streamlined for both my benefit and everyone else's.
I added these steps on gist.github as scripts, although I have not tested them as such. It would be best if you do each line at a time to better understand what you're doing.
Build CM9 Thunderbolt - First Time Only
Build CM9 Thunderbolt - Subsequent Builds
For the first build only:
Code:
mkdir android
cd android/
repo init -u git://github.com/CyanogenMod/android.git -b ics
mkdir -p .repo/local_manifests
wget https://raw.github.com/jblack248/android/ics/local_manifest.xml -O .repo/local_manifests/cm_mecha.xml
repo sync
# Cherry-pick frameworks/base/libs/ui commit from Twisted
cd frameworks/base/ && git fetch http://review.cyanogenmod.com/CyanogenMod/android_frameworks_base refs/changes/85/13285/8 && git cherry-pick FETCH_HEAD && cd ../..
# checkout branch in local trees
repo start ics device/htc/common device/htc/mecha device/htc/msm7x30-common hardware/qcom/camera kernel/htc/mecha-3.0 packages/apps/Camera vendor/htc/mecha vendor/htc/mecha-radio
# download prebuilts
cd vendor/cm/
./get-prebuilts
cd ../..
. build/envsetup.sh
lunch cm_mecha-userdebug
# Make build then rebuild with radio - read script in vendor/htc/mecha-radio if interested
mka bacon && . vendor/htc/mecha-radio/liquid_telephony.sh
For subsequent builds:
Code:
repo sync
# Cherry-pick frameworks/base/libs/ui commit from Twisted
cd frameworks/base/ && git fetch http://review.cyanogenmod.com/CyanogenMod/android_frameworks_base refs/changes/85/13285/8 && git cherry-pick FETCH_HEAD && cd ../..
. build/envsetup.sh
lunch cm_mecha-userdebug
# Make build then rebuild with radio - read script in vendor/htc/mecha-radio if interested
mka bacon && . vendor/htc/mecha-radio/liquid_telephony.sh
How I set up the build environment on Xubuntu 13.04 64-bit - Gist.github:
Code:
echo "Install Android Development Tools and Dependencies"
sudo apt-get install -y android-tools-adb android-tools-fastboot git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.8-dev squashfs-tools build-essential zip curl libncurses5-dev zlib1g-dev lib32z1-dev pngcrush schedtool g++-multilib lib32z1-dev lib32ncurses5-dev lib32readline-gplv2-dev gcc-multilib g++-multilib schedtool libc6-dev-i386 ccache
echo "Link zconf.h to fix Android compile issues in 13.04"
ln -s /usr/include/x86_64-linux-gnu/zconf.h /usr/include
echo "Installing Development Tools"
sudo apt-get install -y meld gedit-plugins git gitk gtkhash
echo "Customize .bashrc"
echo "export USE_CCACHE=1" >> ~/.bashrc
echo "ccache -M 20G > /dev/null 2>&1" >> ~/.bashrc
# these locations will be different for you, depending on where you installed the SDK
# echo "export PATH=${PATH}:~/Documents/Development/bin:~/Documents/Development/adt-bundle-linux-x86_64/sdk/tools:~/Documents/Development/adt-bundle-linux-x86_64/sdk/platform-tools"
Just a note; for the sake of newbs you may want to include instructions on getting the repo script as it doesn't just work OOB.
Code:
remote object '/system/lib/libcamera.so' does not exist
remote object '/system/lib/libcneapiclient.so' does not exist
remote object '/system/lib/libcneqmiutils.so' does not exist
remote object '/system/etc/firmware/a225p5_pm4.fw' does not exist
remote object '/system/etc/firmware/a225_pfp.fw' does not exist
remote object '/system/etc/firmware/a225_pm4.fw' does not exist
remote object '/system/etc/firmware/a300_pfp.fw' does not exist
remote object '/system/etc/firmware/a300_pm4.fw' does not exist
I got this when running ./extract-files.sh although all other files extracted fine, and I'm assuming at the very least libcamera.so is 100% necessary.
You are correct, libcamera.so is especially needed. You can either copy the files manually or modify the extract-files.sh script and extract the ROM zip to a folder to copy the files locally instead of using ADB. Change 'adb pull' to 'cp' and modify the path of the first parameter to the ROM zip folder.
I referenced a couple other guides that help you get the development set up, even the repo bin. That information changes, has been done over many times, and isn't as useful in the long run unless I micro-manage this guide. If I get a chance I might flesh this out a little, but I'm not sure how much of a desire there is for this. I'll help where I can, though.
I updated the OP with fixes to make sure everything works automatically. You no longer have to use the extract-files.sh script (or setup adb) since I made a vendor repo to include all of those files for you. Thanks to santod and others for pointing out a number of problems.
Note: As of 2013-06-29 CM9 is in a broken state as we're getting the kernel and stock OTA blobs to work properly.
How to build Carbon for Serranoltexx{gt-I9195} & serrano3gxx {gt-I9190}
this guide is based on cyanogenmod's how to wiki
i made this easy, you just need do these things and you will download only carbon rom and serranoltexx spesific files so you dont need edit much files. i made it easier for you.
For both 32-bit & 64-bit systems, you'll need:
Code:
bison build-essential curl flex git-core gnupg
gperf libesd0-dev libncurses5-dev libsdl1.2-dev
libwxgtk2.8-dev libxml2 libxml2-utils lzop
openjdk-6-jdk openjdk-6-jre pngcrush schedtool
squashfs-tools xsltproc zip zlib1g-dev
Click to expand...
Click to collapse
In addition to the above, for 64-bit systems, get these:
Code:
g++-multilib gcc-multilib lib32ncurses5-dev
lib32readline-gplv2-dev lib32z1-dev
Click to expand...
Click to collapse
Open your Terminal and paste these commands line by line
Code:
mkdir -p ~/bin
mkdir -p ~/carbon
curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
export PATH=${PATH}:~/bin
Code:
cd ~/carbon/
Download the Source
this is original carbon source but i edited it because it includes alot devices, kernel and vendor files that we dont need.
Code:
repo init -u https://github.com/proxuser/android.git -b jb3 && repo sync -f
wait it downloads the source. go out and drink a coffee or play with your smartphone, do whatever you want
it downloads carbon spesific serrano3gxx and serranoltexx devices.
after you full downloaded Carbon source, let get include some fm fixes.
Code:
cd ~/carbon/frameworks/av
git fetch http://review.cyanogenmod.org/CyanogenMod/android_frameworks_av refs/changes/24/51424/1 && git cherry-pick FETCH_HEAD
cd ~/carbon/frameworks/base
git fetch http://review.cyanogenmod.org/CyanogenMod/android_frameworks_base refs/changes/52/49752/2 && git cherry-pick FETCH_HEAD
if you sync your repo these patches will be overwritten by carbon rom. you need apply them again like above.
so are we ready to build ? :S maybe ? ok lets try
go to vendor/carbon folder and open vendorsetup.sh
then add these lines bottom or top of file
Code:
add_lunch_combo carbon_serranoltexx-userdebug
add_lunch_combo carbon_serrano3gxx-userdebug
if you want build for i9195 go to terminal
cd ~/carbon/
Code:
source build/envsetup.sh
breakfast serranoltexx
if you want build for i9190 go to terminal
cd ~/carbon/
Code:
source build/envsetup.sh
breakfast serrano3gxx
you will get information with what build number, what device and so on..
now time to start building
Code:
export USE_CCACHE=1
you want build for i9195 then
Code:
brunch serranoltexx
you want build for i9190 then
Code:
brunch serrano3gxx
if you face any errors, ask it here.
reserved for me
Amazing Tutorial
Good to see you are helping people like me learn +1 keep it up
What do you think this would run like under a Win8 environment in a Virtual Machine?
hi proxuser, followed your guide, but at breakfast got an error about nfc_enhanced.mk missing from /carbon/vendor/carbon/config, fixed that by copying that file from cyanogenmod.
Brunch gave me the following error:
Code:
make: *** No rule to make ta
rget `/home/gerbrand/android/output/carbon/target/common/obj/JAVA_LIBRARIES/telephony-msim_intermediates/classes.jar', needed by `/home/gerbrand/android/output/carbon/target/common/obj/APPS/Phone_intermediates/classes-full-debug.jar'. Stop.
make: *** Waiting for unfinished jobs....
logtags: /home/gerbrand/android/output/carbon/target/common/obj/APPS/Phone_intermediates/src/src/com/android/phone/EventLogTags.java <= packages/apps/Phone/src/com/android/phone/EventLogTags.logtags
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
any suggestions how to fix?
tinnef said:
hi proxuser, followed your guide, but at breakfast got an error about nfc_enhanced.mk missing from /carbon/vendor/carbon/config, fixed that by copying that file from cyanogenmod.
Brunch gave me the following error:
Code:
make: *** No rule to make ta
rget `/home/gerbrand/android/output/carbon/target/common/obj/JAVA_LIBRARIES/telephony-msim_intermediates/classes.jar', needed by `/home/gerbrand/android/output/carbon/target/common/obj/APPS/Phone_intermediates/classes-full-debug.jar'. Stop.
make: *** Waiting for unfinished jobs....
logtags: /home/gerbrand/android/output/carbon/target/common/obj/APPS/Phone_intermediates/src/src/com/android/phone/EventLogTags.java <= packages/apps/Phone/src/com/android/phone/EventLogTags.logtags
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
any suggestions how to fix?
Click to expand...
Click to collapse
look here http://forum.xda-developers.com/showpost.php?p=46723395&postcount=1600
go to /carbon/.repo/manifests/
open default.xml
and find
Code:
<project path="frameworks/opt/telephony" name="CyanogenMod/android_frameworks_opt_telephony" remote="cm" revision="cm-10.2" groups="pdk" />
add after
Code:
<project path="frameworks/opt/telephony-msim" name="CyanogenMod/android_frameworks_opt_telephony-msim" remote="cm" revision="cm-10.2" />
you also can try
make carbon -j7
after select serrano*** in lunch menu
i added missing projects in my manifest too.
you can do a repo init and repo sync again.
it will only add new projects to repo and will sync them.
Code:
repo init -u https://github.com/proxuser/android.git -b jb3 && repo sync -f
Will try editing the manifest.
tinnef said:
Will try editing the manifest.
Click to expand...
Click to collapse
look i edited my msg. try it
proxuser said:
look i edited my msg. try it
Click to expand...
Click to collapse
Just to be safe I deleted the whole thing and started from scratch. It build fine, now.
Still got the error about missing /vendor/carbon/config/nfc_enhanced.mk, though
tinnef said:
Just to be safe I deleted the whole thing and started from scratch. It build fine, now.
Still got the error about missing /vendor/carbon/config/nfc_enhanced.mk, though
Click to expand...
Click to collapse
I will look at it. and will report back here
Sent from my GT-I9195 using xda premium
could you also make a tutorial on how to compile the AOSP kernel, you made? And how to make a flashable .zip of it.
junkyde said:
could you also make a tutorial on how to compile the AOSP kernel, you made? And how to make a flashable .zip of it.
Click to expand...
Click to collapse
there are enough guides for kernel build. but all this needs basic knowledge. but i may write next weeks a guide about kerlen build for s4 mini devices.
proxuser said:
there are enough guides for kernel build. but all this needs basic knowledge. but i may write next weeks a guide about kerlen build for s4 mini devices.
Click to expand...
Click to collapse
Cool, thank you very much :good:
Can I use this to build AOKP or AOSPA3+ ? With some changes ?
Envoyé de mon GT-I9195 en utilisant Tapatalk
I tried to follow it, but it won't work (anymore?):
$ source build/envsetup.sh
including device/generic/armv7-a-neon/vendorsetup.sh
including device/generic/mips/vendorsetup.sh
including device/generic/x86/vendorsetup.sh
including device/samsung/serrano3gxx/vendorsetup.sh
including device/samsung/serranoltexx/vendorsetup.sh
including vendor/carbon/vendorsetup.sh
including sdk/bash_completion/adb.bash
[[email protected] carbon]$ breakfast serranoltexx
including vendor/carbon/vendorsetup.sh
build/core/product_config.mk:238: *** _nic.PRODUCTS.[[device/samsung/serranoltexx/carbon.mk]]: "vendor/carbon/config/nfc_enhanced.mk" does not exist. Stop.
** Don't have a product spec for: 'carbon_serranoltexx'
** Do you have the right repo manifest?
Click to expand...
Click to collapse
The Sony-Kitakami dev team is glad to announce a guide on how to build CM13 or any CM13 based ROM for the entire Z5- series
Note: If you plan to release a ROM using our sources then credits aren't required, however we would deffinately appriciate it very much!
Before we get started
What you need
Any of our supported devices
A PC that is capable of running linux
An Internet connection
And lots of lots of patience
Getting started
Setting up Linux
To be able to build a ROM fully from source a Linux based operating system is required. This is due to the fact that windows is unable to compile the android source code due to lacking tools/libaries. After all you're compiling Linux on Linux (Because android is Linux). We strongly recommend to have AT LEAST 50 GB of space for Ubuntu!!!
Please be aware that this guide is target audiences with Ubuntu specifically and so may not work on other distros. Because of this we prefer ubuntu for everyone that is coming from windows.
Because this guide isn't about how to install ubuntu, I'll let this guide explain all for you : http://www.linuxtechi.com/ubuntu-15-10-desktop-installation-guide/
Installing the required packages
We will start off by downloading openjdk 7 (Note: Open JDK 8 isn't supported by CM yet).
Please open the terminal and enter or copy paste the following :
Code:
sudo apt-get update && sudo apt-get install openjdk-7-jdk
After entering the password (Note: you won't be able to see any output when typing the password) hit enter and then type "y" and hit enter again.
Once this is completed we will download the required packages. Please copy paste the following into your terminal :
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential
zip curl zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386
lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z-dev ccache
libgl1-mesa-dev libxml2-utils xsltproc unzip maven schedtool
You may have to enter your password again after hitting enter. Once that is done enter "y" again and hit enter again.
Additionally you can set up ccache by entering the following into the terminal :
Code:
echo 'export USE_CCACHE=1' >> ~/.bashrc
after this has been done, restart your PC.
Then we will set up git. Replace "Your name" with your name and "[email protected]" with your email :
Code:
git config --global user.name "Your Name"
git config --global user.email "[email protected]"
Now we will need to set up the repo tool. Copy the following into the terminal:
Code:
mkdir ~/bin && PATH=~/bin:$PATH && echo 'PATH=~/bin:$PATH' >> ~/.bashrc && curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo && chmod a+x ~/bin/repo
Guides
CyanogenMod 13
Getting the CM13 source
Start out by making a directory called cm13 in your home dir by running the following command :
Code:
mkdir ~/cm13/
Now we will initialize the CM13 repository by entering the following in your terminal :
Code:
cd ~/cm13/ && repo init -u https://github.com/CyanogenMod/android.git -b cm-13.0
We are now coming to the worst part and that is downloading the entire 20GB big CM13 source code. To sync the source code, run the following command :
Code:
repo sync
And now wait.... and wait..... and wait....... until it's done
Getting the Z5/Z5C/Z5P source
To clone the device specific source code we'll have to introduce you to some of the codenames as those are used for simplifying reasons when building from source
Code:
NAME CODENAME
Sony Xperia Z5 sumire
Sony Xperia Z5 Compact suzuran
Sony Xperia Z5 Premium satsuki
We will start off by cloning the appropriate manifests for your device. Please enter the following and make sure to replace yourdevicecodename with your device codename :
Code:
cd ~/cm13/ && git clone https://github.com/Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-yourdevicecodename .repo/local_manifests
Now we will sync our device specific source like this :
Code:
repo sync --force-sync
This could again take some time depending on your connection as the kernel source is quite heavy.
Building the ROM
We will now get to the big part, which is compiling. Note this could take from 1 hour to more than 10 hours depending on how good your PC is. Replace yourdevicecodename with your targeted device codename.
Please copy the following to your terminal line by line
Code:
cd ~/cm13/
cd .repo/local_manifests/ && git pull && cd ../.. && repo sync --force-sync
. build/envsetup.sh
lunch
cm_yourdevicecodename-userdebug
mka clobber
mka bacon
After a long time of waiting you should be done and your CyanogenMod package should be located in home/cm13/out/target/product/yourdevicecodename/
Congratulations! You have now build your very own CM13 ROM from source!
CyanogenMod 13 based ROMs
If you are planning to build a CM13 based or similar ROM (Bliss Pop, RR, Slim etc.), we're expecting you to be a more advanced user. As much as we would like to give a strict guide, we simply can't cover all as there are always differences between each and every ROM.
You will have to start off by downloading the ROM source. Again this should be similar to CM but the git links are different.
Ex:
Code:
RR = repo init -u [url]https://github.com/ResurrectionRemix/platform_manifest.git[/url] -b marshmallow
Bliss = repo init -u [url]https://github.com/BlissRoms/platform_manifest.git[/url] -b mm6.0
and much more. Most of them can be found on the ROMs official git team under the platform_manifest repo.
Here is where things get hard. You will have to edit our manifests and adjust them to work with your target ROM. This is nearly impossible to explain as each ROM contains different repos that may overlap with the CM ones or it may lack repos that you're trying to remove. In other words, you will need to learn how to use the local manifests. A nice guide exists here https://wiki.cyanogenmod.org/w/Doc:_Using_manifests
Once this is done you will have to adjust your device tree to work with your specific ROM. Again this is always different. The best way to learn is to compare a CM tree with a tree from a different ROM
Ex:
Samsung Galaxy S5 mini tree for CyanogenMod : https://github.com/cm-3470/android_device_samsung_kminilte
Samsugn Galaxy S5 mini tree for BlissPop : https://github.com/cm-3470/android_device_samsung_kminilte/tree/bosp-6
The main differences are the cm.mk or device.mk files etc.
Here is a commit that show the transfer from CM to Bliss Pop which usually isn't very hard
https://github.com/cm-3470/android_...mmit/5e902e7dd228c6804b2735af9a96ea02969aa2cf
Once this is completed you can run your build and release it!
XDA:DevDB Information
How to build CM13 from source for the Z5, ROM for the Sony Xperia Z5
Contributors
CTXz, zacharias.maladroit, Moonbutt74
Source Code: https://github.com/Sony-Kitakami
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Stock Marshmalllow
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-04-12
Last Updated 2016-04-15
Reserved
Reserved
Thanks for posting the guide
I followed the steps, but got stuck at the command: "cd ~/cm13/ && git clone [email protected]:Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-sumire"
It returned this to me:
Cloning into 'android_.repo_local_manifests'...
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
EDIT: Never mind, I investigated, and found out that I had to generate an SSH key and link that to my GitHub account. If anyone needs help with this, I used this guide: https://help.github.com/articles/generating-an-ssh-key/
Uclydde said:
Thanks for posting the guide
I followed the steps, but got stuck at the command: "cd ~/cm13/ && git clone [email protected]:Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-sumire"
It returned this to me:
Cloning into 'android_.repo_local_manifests'...
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
EDIT: Never mind, I investigated, and found out that I had to generate an SSH key and link that to my GitHub account. If anyone needs help with this, I used this guide: https://help.github.com/articles/generating-an-ssh-key/
Click to expand...
Click to collapse
Hey, sorry for that. I had git set to ssh like and forgot that they require a keygen. I've changed it to https://github.com/Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-yourdevicecodename so it no longer needs a key
Actually, is you are building CM13 and using Ubuntu 14.04 or up, you just need to type:
Code:
sudo apt-get install bison g++-multilib git gperf libxml2-utils make zlib1g-dev:i386 zip
Okay, I hit another bump. When I type: "cd .repo/local_manifests/ && git pull && cd ../.. && repo sync --force-sync"
It returns:
bash: cd: .repo/local_manifests/: No such file or directory
zhangyang_haha said:
Actually, is you are building CM13 and using Ubuntu 14.04 or up, you just need to type:
Code:
sudo apt-get install bison g++-multilib git gperf libxml2-utils make zlib1g-dev:i386 zip
Click to expand...
Click to collapse
No, you'll be missing quite some packages
Sent from my E5823 using XDA-Developers mobile app
Uclydde said:
Okay, I hit another bump. When I type: "cd .repo/local_manifests/ && git pull && cd ../.. && repo sync --force-sync"
It returns:
bash: cd: .repo/local_manifests/: No such file or directory
Click to expand...
Click to collapse
Ok updated again. Please run this.
cd ~/cm13/ && git clone https://github.com/Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-yourdevicecodename .repo/local_manifests
CTXz said:
Ok updated again. Please run this.
cd ~/cm13/ && git clone https://github.com/Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-yourdevicecodename .repo/local_manifests
Click to expand...
Click to collapse
Yay, that worked! However, I got to the "cm_yourdevicecodename-userdebug" line, so I entered "cm_sumire-userdebug", but that returned: "cm_sumire-userdebug: command not found"
Uclydde said:
Yay, that worked! However, I got to the "cm_yourdevicecodename-userdebug" line, so I entered "cm_sumire-userdebug", but that returned: "cm_sumire-userdebug: command not found"
Click to expand...
Click to collapse
This needs a
Code:
repo --sync
in between
Uclydde said:
Yay, that worked! However, I got to the "cm_yourdevicecodename-userdebug" line, so I entered "cm_sumire-userdebug", but that returned: "cm_sumire-userdebug: command not found"
Click to expand...
Click to collapse
When you type lunch it will show a big list of devices and prompt for an input. Enter cm_sumire-userdebug. You can also however run
Code:
lunch cm_sumire-userdebug
Sent from my E5823 using XDA-Developers mobile app
Nice guide, buddy
Binaries have been updated to v5a,
v4 is included in this, can you update please? I did it manually and got it to boot
I'm not able to push them to github.
http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-m-android-6-0/
celderic said:
Binaries have been updated to v5a,
v4 is included in this, can you update please? I did it manually and got it to boot
I'm not able to push them to github.
http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-m-android-6-0/
Click to expand...
Click to collapse
Is the camera working for you ?
Did the focus improve ? or are still changes needed ?
zacharias.maladroit said:
Is the camera working for you ?
Did the focus improve ? or are still changes needed ?
Click to expand...
Click to collapse
It doesn't work for me with v4, or v5a
Using the guide posted here, nothing changed only updated to v5a manually.
I haven't bothered to look through the log yet, bur it says camera hardware inaccessible or something like that I forget the exact wording. With v4 and v5a, I even downloaded the source again to make sure it wasn't a problem on my end.
I'll try and have a proper look tomorrow
celderic said:
It doesn't work for me with v4, or v5a
Using the guide posted here, nothing changed only updated to v5a manually.
I haven't bothered to look through the log yet, bur it says camera hardware inaccessible or something like that I forget the exact wording. With v4 and v5a, I even downloaded the source again to make sure it wasn't a problem on my end.
I'll try and have a proper look tomorrow
Click to expand...
Click to collapse
Yeah, we kinda apologize for that. My linux environment has broken hard after upgrading to ubloatu, i mean Ubuntu 16.04... I'm busy updating to debian now, and will most likely stick with debian jessie as sid and stretch ended in an huge catastrophy. Thanks to @moonbutt74 for not warning me. (<- Only a joke, he actually predictied that sid will be a catastrophy but I didn't listen cuz that's me). I'll also most likely need to update the guide too as we no longer prefer/recommend ubuntu 16.04
Sent from my E5823 using XDA-Developers mobile app
celderic said:
It doesn't work for me with v4, or v5a
Using the guide posted here, nothing changed only updated to v5a manually.
I haven't bothered to look through the log yet, bur it says camera hardware inaccessible or something like that I forget the exact wording. With v4 and v5a, I even downloaded the source again to make sure it wasn't a problem on my end.
I'll try and have a proper look tomorrow
Click to expand...
Click to collapse
@celderic
did you do any modifications to the repos ?
If not did the kernel built with the ROM work for you ?
Thanks
edit:
v04 and v05a binary blobs are the same for us (Kitakami)
Changes in v05a was for kanuti, rhine, shinano and yukon
zacharias.maladroit said:
@celderic
did you do any modifications to the repos ?
If not did the kernel built with the ROM work for you ?
Thanks
edit:
v04 and v05a binary blobs are the same for us (Kitakami)
Changes in v05a was for kanuti, rhine, shinano and yukon
Click to expand...
Click to collapse
Sorry been on holiday not had time to reply on here, oh I didn't realise they where the same for our device.
I didn't modify the repos, and yes the stock cm kernel booted fine.
openjdk-7 isnt available under ubuntu 16.04. Is 8 or 9 supported yet or do I have to manually install v7?
Before starting, yes, I know there is a project already.
Hello everyone. I've been following this step by step:
https://wiki.lineageos.org/devices/harpia/build
Only I have replaced this line:
Code:
repo init -u https://github.com/LineageOS/android.git -b cm-14.1
For this one:
Code:
repo init -u git://github.com/LineageOS/android.git -b lineage-15.0
The problem is, I get loads of fatal errors when running:
Code:
repo sync
What am I doing wrong?
Thank you.-
Seems the error was due to a bad internet connection.
Hope it works out for you now. Good luck.
i tried too few weeks ago. can you post your roomservice.xml?