Database Users

Korean FRF91 rom has new radio and hboot !

so, in this thread : http://forum.xda-developers.com/showthread.php?t=722281 , they say that the radio version of this rom is 32.41.00.32U_5.08.00.04 (same as the last desire rom) , and the bootloader version is HBOOT-0.35.0017. can this be useful for the devs ?
edit : it seems that the desire version of this radio has new driver that were the key to implement 720p on it.

I don't know if this is useful, but I flashed it successfully by crafting my very own update.zip
This update.zip doesn't have the HBOOT as I have no idea how it impacts the rest of the phone and the flashing/downgrading capabilities of the phone.
I ONLY TESTED IT WITH MY PHONE! IT MIGHT NOT WORK AT ALL WITH YOURS!
Tested on a T-Mobile version (900/AWS/2100 MHz, European version)
Here's the link: http://www.multiupload.com/KLJAXW9G4C
It just works, camcorder and camera still works properly, no need to update the Camera apk.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

G0belet said:
I don't know if this is useful, but I flashed it successfully by crafting my very own update.zip
This update.zip doesn't have the HBOOT as I have no idea how it impacts the rest of the phone and the flashing/downgrading capabilities of the phone.
I ONLY TESTED IT WITH MY PHONE! IT MIGHT NOT WORK AT ALL WITH YOURS!
Tested on a T-Mobile version (900/AWS/2100 MHz, European version)
Here's the link: http://www.multiupload.com/KLJAXW9G4C
It just works, camcorder and camera still works properly, no need to update the Camera apk.
Click to expand...
Click to collapse
Mines says 32.41.00.32h_5.08.00.04
Why is mines differant? What's the difference between h and u?

Tested here with CM6, everything seems good:
http://forum.cyanogenmod.com/topic/2547-new-radio-5080004
Currently running CM6 nightlies on the AT&T N1, but I'm in New Zealand, not US

she work perfectly with MCR R21 MODACO fo me

Does the new radio still work with the new camera hack and all? I'm on cyan 6 r c 1 with 5.08 radio no problems. But how about using It on cyan 508 with camera hack? And same with r c 2?

Screencast black screen?

Hi guys
I use screen cast a lot on my n4. And it worked fine. But on Friday I restored my stock backup and then did the ota to 4.2.2. Then I flashed the latest faux kernel beta.
This morning, I wanted to use screen cast so I started it, created my video for like 5 mins. When it saved, I watched it but it was just a black screen! You can still hear my voice though. I ticked these two settings in developer settings (in attached screeny) as it said to do on the gplay page but still no luck!
BTW, I was using PA 3.0 beforehand.
Any help? Any suggestions on what I can do?
Cheers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 4 using Tapatalk 2

Anyone?

Same problem here with an AOKP Unofficial 4.2.2. Reflashed back to AOKP MR1 Build 3 (4.2.1) and it works again. So it looks like this is being caused by 4.2.2.

Well i got this fixed by going back to Paranoid Android (4.2.2) so i dont know whats causing it.

Nathtech said:
Well i got this fixed by going back to Paranoid Android (4.2.2) so i dont know whats causing it.
Click to expand...
Click to collapse
Strange. I experience the same problem on Paranoid Android 3.1

Despite writing to the Developers, they won't fix it or even acknowledge.

this is a shame, i wanted to stay on stock, but i will try to flash paranoid to see if i manage to get screencast to work.!

Screencast was found working on Slimbean. But not any other mainstream custom/stock 4.2.2 ROMs. Such a shame.

I don't think the developer of the App is to blame for this. This looks like a framework change in Android.

So any devs know why it broke?

Still not working? I get black screen while recording on my S4 ATT 4.2.2.
Any Solutions??? or ALTERNATIVE

VS980 - basebands, modems, kernels... help!

VS980 noob in need of some assistance.
Tried to install Mahdi-Rom 2.5 (5/09) but I'm experiencing some bugs I believe are baseband/modem related, though I'm really not sure. Here's the current setup:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mahdi's default kernel
4.4.X modified baseband by dr87
12b modem
Rotation and the dialer do not work at all. Help me, XDA Developers. You're my only hope.

chaaaad said:
VS980 noob in need of some assistance.
Tried to install Mahdi-Rom 2.5 (5/09) but I'm experiencing some bugs I believe are baseband/modem related, though I'm really not sure. Here's the current setup:
Mahdi's default kernel
4.4.X modified baseband by dr87
12b modem
Rotation and the dialer do not work at all. Help me, XDA Developers. You're my only hope.
Click to expand...
Click to collapse
Because you are on a 12 baseband as shown above, did you install the Rom with Patch R1? If so, that is based off a 24a baseband, you need to upgrade to a full kitkat stock rom first.

Jimi Mack said:
Because you are on a 12 baseband as shown above, did you install the Rom with Patch R1? If so, that is based off a 24a baseband, you need to upgrade to a full kitkat stock rom first.
Click to expand...
Click to collapse
Sorry, again... noob here. Since then I've gone back to stock 11a using tot with root and custom recovery. So I have to flash a KK rom first before using Mahdi? Is there one you'd recommend?

chaaaad said:
Sorry, again... noob here. Since then I've gone back to stock 11a using tot with root and custom recovery. So I have to flash a KK rom first before using Mahdi? Is there one you'd recommend?
Click to expand...
Click to collapse
If you are using the Mahdi rom with the R1 patch, yes.
Below is one with clear instructions.
http://forum.xda-developers.com/showthread.php?t=2715408

Questions About Basebands, Mobile Networks and Unlocked Devices

I have a few concerns to address. I recently bought the Galaxy i9505 (or in my case, the Sprint SPH-L720T version). The device comes unlocked with stock firmware/software, Lollipop 5.0.1 baseband OH2.
Now I will try to make this as clear as possible. We don't have the Sprint network here, I'm on Vodafone. I just flashed an official ROM from Sammobile with a different baseband version (this one) because I can't find the version that my phone came pre-installed with. I upgraded to address the StageFright and widgets app draw issue that was on the stock ROM.
Now my question is: by flashing a different baseband version, will I lose the ability to have an unlocked device and incur roaming charges on my network, or is the unlocked to work on multiple networks feature on a firmware level so I don't have to worry about it?
Thanks.

Grumpy Cat said:
I have a few concerns to address. I recently bought the Galaxy i9505 (or in my case, the Sprint SPH-L720T version). The device comes unlocked with stock firmware/software, Lollipop 5.0.1 baseband OH2.
Now I will try to make this as clear as possible. We don't have the Sprint network here, I'm on Vodafone. I just flashed an official ROM from Sammobile with a different baseband version (this one) because I can't find the version that my phone came pre-installed with. I upgraded to address the StageFright and widgets app draw issue that was on the stock ROM.
Now my question is: by flashing a different baseband version, will I lose the ability to have an unlocked device and incur roaming charges on my network, or is the unlocked to work on multiple networks feature on a firmware level so I don't have to worry about it?
Thanks.
Click to expand...
Click to collapse
You will lose your domestic/international unlock of you upgrade the Baseband unless it was actually unlocked by Sprint.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bilgerryan said:
You will lose your domestic/international unlock of you upgrade the Baseband unless it was actually unlocked by Sprint.
Click to expand...
Click to collapse
Yeah, I kinda figured that would be the case. Good thing I made a backup.
I suppose you wouldn't know where I can get a StageFright Patch for the OH2 version by any chance?

On nexus 4 7.1.1 android LTE?

Hello , in nexus 4 cm14 (android 7.1.1) working LTE if working please help my!

Danas54 said:
Hello , in nexus 4 cm14 (android 7.1.1) working LTE if working please help my!
Click to expand...
Click to collapse
I'm trying to flash different modems, but doesn't work

merafly said:
I'm trying to flash different modems, but doesn't work
Click to expand...
Click to collapse
My too... :/

I know t-mobile network on nexus 4 lte settings don't stick reverts back to hspa+ In an area I know has 4g and it switches back pretty quickly so maybe that is your issue
Sent from my iPhone using Tapatalk

Help!!!!!!!

Danas54 said:
Help!!!!!!!
Click to expand...
Click to collapse
Hello.
The Nexus 4 never officially supported LTE. Some people discovered that there was partial support in the chipset and figured out how to enable it. However it only works on a limited frequency range and you have to know if the cell sites near you have the right frequency band. I never bothered figuring it out for myself as HSDPA+ is fast enough for me and I only have a small amount of monthly data to use anyway.
You need to use older versions of the baseband/modem as the most recent ones disabled the possible LTE modes. Whether older versions of the baseband are compatible with community ROMs based on 6.0 and up I don't know. I haven't seen any discussion for a while now. Phones with good supported LTE have been common for a long time and I suspect anyone who really needed LTE has moved on.

Band 4 LTE works just fine, problem is, I think Tmo in the US is the only carrier that supports it (thankfully I am in the US and on T-mo in that case). Any ROM with a Hybrid Modem will work. I am on latest 7.1.1_r4 Nitrogen OS and is works fine: http://forum.xda-developers.com/nexus-4/development/rom-nitrogen-os-n-substratum-10-09-2016-t3459341
Make sure LTE shows as enabled: http://forum.xda-developers.com/nexus-4/general/updated-zip-one-lte-enabler-flash-one-t2358931

Hi
Good news!, in latest 7.1.1_r4 Nitrogen OS, this ROM has build.prop modified by default with LTE option enabled in mobile network menu. But this ROM has modem device only for 3G, so i flashed this file and 4G LTE it's back again on band 4!
Modem file: https://mega.nz/#!Yg8AUDQa!bjCZ52WivDwHqN1wrMNNTRRq7ElVI0Qj9VhjG50AOuE
Greetings from Chile
PD: I attach some pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}