Database Users

grrr

I rooted my phone previously and then saw that DL09 was available, so i decided to upgrade. once i upgraded i had to root the phone again and havent been able to since..the phone goes through all the steps in the one click root process and once it restarts after about 2 seconds i unlock it on the lock screen and it freezes up and the root fails..here is what it says when i try to root.
******************************************************************************
* *
* Dirrk's EZ Root v0.2 (Sebastien Krahmers Exploit) *
* *
******************************************************************************
*
* Testing if your device is connected
*
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
I5003ec0df8a device
*
* If you are NOT connected please follow these directions
* Install the correct drivers
* Turn On Debugging
* Check usb port, cable and phone
* Then rerun this application
*
Press any key to continue . . .
*
* Pushing the files to your phone
* rage.bin, busybox, Superuser.apk, su, com.sh
376 KB/s (1867568 bytes in 4.838s)
88 KB/s (26264 bytes in 0.291s)
225 KB/s (196521 bytes in 0.852s)
17 KB/s (5392 bytes in 0.294s)
3 KB/s (281 bytes in 0.069s)
* Restarting your phone to ensure the exploit will work
* When your phone comes back on please unlock it if it is locked and then
* wait
* About to exploit your device
* This will take about 3 minutes
*
* If it doesn't respond after waiting 5 minutes then it probably failed,
* so you should close this and run again
*
* Start Time: 21:29:09.77
*
*
** Successfully exploited, installing permanent root files and deleting temp fil
es
*
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
*
* Restarting your phone now.
*
error: device not found
* Complete
*
******************************************************************************
Press any key to continue . . .

There has GOT to be an easier way to root than this batch file...Im gonna look into it, in the morning. No promises, of course.

http://forum.xda-developers.com/showthread.php?t=833953
Does this works ?

hetaldp said:
http://forum.xda-developers.com/showthread.php?t=833953
Does this works ?
Click to expand...
Click to collapse
I've heard it doesn't on stock DL09, rage.bin is all we have as of now
until adrynalyne saves the day again

I had a pretty easy time rooting my phone using the terminal on my Mac. No drivers to worry about that way. Pretty much uses adb. Maybe try installing cygwin on your pc, and find the mac/linux rooting procedure. If I were a PC user, I think that would be the route I would take.

Just posted on another report of this. The one clickroot worked for my phone after updating to DL09.
I had the same exact error message you have. I let it sit for almost ten minutes and it did complete. I was getting frustrated as well because it was not working and i was at work when i was trying to do this.

If you were already rooted, why on earth did you go for the OTA instead of flashing one of the DL09 packages?
There's no magic in downloading from Verizon, you know. Same software.

i didnt do the ota update i flashed it..i havent had a chance to try and root again but for some reason now im not able to send or receive sms.

I was able to edit the START_ROOT.bat file so the it would pause for 120 seconds instead of 60 seconds after the first phone reboot. Then, after the reboot, unplug the USB from the phone and reconnect it. I'm not sure if this will work for everyone, but it worked for me.
Sent from my SCH-I500 using XDA App

Worked for me. Must unplug after first reboot.

Your sms problem may be solved by flashing the DL09 modem if you haven't already.
Sent from my SCH-I500 using XDA App

http://forum.xda-developers.com/showthread.php?t=803682
check it out.....it does work

jojodablow said:
Worked for me. Must unplug after first reboot.
Click to expand...
Click to collapse
I did the same thing and it worked for me as well. I was running DJ05 previously and after upgrading to DL09 I had to update the Samsung Drivers on my PC. I was prompted to install the new drivers after connecting my fascinate to my and selecting the option to copy files to my PC. After updating the drivers I was successfully able to root my phone using "Dirrk's EZ Root v0.2 (Sebastien Krahmers Exploit)" and disconnecting/reconnecting the USB cable after the first reboot.

Can not get root =[

This is on the froyo dell streak 5 using Superoneclick 2.1.1
SuperOneClick v2.1.1.0
Checking drivers...
Killing ADB Server...
OK 0.04s
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK 4.08s
Waiting for device...
OK 8.06s
2.2
Getting manufacturer...
Dell Inc.
OK 0.03s
Getting model...
Dell Streak
OK 0.03s
Getting version...
15697
OK 0.04s
Checking if rooted...
False
OK 0.06s
Installing BusyBox (temporary)... - Step #1
4850 KB/s (1062992 bytes in 0.214s)
OK 0.27s
Installing BusyBox (temporary)... - Step #2
OK 0.03s
Rooting device... - Step #1
4433 KB/s (585731 bytes in 0.129s)
OK 0.19s
Rooting device... - Step #2
OK 0.02s
Rooting device... - Step #3
OK 0.02s
Rooting device... - Step #4
OK 0.02s
Rooting device... - Step #5
OK 7.05s
Remounting /system with read-write access...
error: closed
FAILED
I am not a noob to rooting but noob to this dell. Is there something I am missing?

You should have searched away,this question has been asked a couple of time.USE GINGERBREAK OR SUPERUSER ETC.
Sent from my Dell Streak using XDA App

[Q] Root Exploit failed

Hey,
I tried several times to root my thinkpad tablet with the Thinkpad Tablet Root Exploit but only got "Exploit failed".
Unfortunately the thinkpadforums.com is currently down so I couldn't search for solutions.
The Tablet is connected to the PC and I can see the device in adb. It's also connected to a WIFI network.
I also tried to make a factory reset -> "Exploit failed"
I don't know what to do and hope you can help me.
Thanks
Trekky
Sorry forgot to download the needed Packages in SDK..works now

Trekky said:
Sorry forgot to download the needed Packages in SDK..works now
Click to expand...
Click to collapse
Could you elaborate on this? I'm also having trouble getting the exploit to work on my tablet, even after multiple tries and a factory reset... What exactly are the packages that you installed that helped?
Cheers,
-Alrua

alrua said:
Could you elaborate on this? I'm also having trouble getting the exploit to work on my tablet, even after multiple tries and a factory reset... What exactly are the packages that you installed that helped?
Cheers,
-Alrua
Click to expand...
Click to collapse
Hey,
because the thinkpadtabletforum was down I couldn't see the instructions for the Android SDK.
I forgot
Code:
3.3 At the end of the install chose to run the Android SDK Manager.
3.4 You will need the following package for the TPT:
-Android SDK Tools
[B]-Android 3.1 (API 12)[/B]
-Extras > Google USB Driver package
Check the status column for each and if is not installed select the check box beside the packages and click the Install Packages button.
3.5 If you get a Dependencies List select the Accept All radio button and click the Install button.
I hope this helps you.
Trekky

Don't believe what your c prompt says. I've heard a lot of folk saying theirs looked like it failed, but they have root access now. Check to see of you have access to your root directory with Root Explorer, ESFile Explorer, or another app that requires root. You also may need to download SU and Terminal from Market.

Hey,
I have the same problem. I started off with a factory reset.
I can see my device in adb. It is connected to a WIFI network, it is connected by USB, the screen is on, USB debugging is also switched on. I got all the needed packages in Android SDK [except the Google TV Addon which can be found under Android 3.1 --> it says: "Not compatible with Windows"]
Here is my log (just in case)
Code:
[*] Lenovo Thinkpad Tablet root script (Windows version)
[*] Exploit copyright (C) 2012 Dan Rosenberg (@djrbliss)
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Lenovo drivers installed, that your phone is
[*] connected via USB, and that your phone is connected to a wifi
[*] network.
[*]
[*] Press any key to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Let's get ready to rumble...
[*] This may take awhile...
[*] Ignore any prompts or pop-ups on your tablet.
585 KB/s (5993 bytes in 0.010s)
[*] Thinkpad Tablet Root Exploit
[*] Copyright (c) 2012 Dan Rosenberg (@djrbliss)
[-] Exploit failed.
[1] Segmentation fault /data/local/tmp/...
[*] If the words "exploit failed" appear above, exit now and try again.
[*] Note: a segmentation fault is supposed to happen and should be ignored.
[*] Otherwise, press any key to reboot and continue rooting.
Press any key to continue . . .
Even if I simply continue; the device will not be rooted afterwards. Here the log which appears after I continue after the "Exploit failed"-error:
Code:
[*] Lenovo Thinkpad Tablet root script (Windows version)
[*] Exploit copyright (C) 2012 Dan Rosenberg (@djrbliss)
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Lenovo drivers installed, that your phone is
[*] connected via USB, and that your phone is connected to a wifi
[*] network.
[*]
[*] Press any key to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Let's get ready to rumble...
[*] This may take awhile...
[*] Ignore any prompts or pop-ups on your tablet.
585 KB/s (5993 bytes in 0.010s)
[*] Thinkpad Tablet Root Exploit
[*] Copyright (c) 2012 Dan Rosenberg (@djrbliss)
[-] Exploit failed.
[1] Segmentation fault /data/local/tmp/...
[*] If the words "exploit failed" appear above, exit now and try again.
[*] Note: a segmentation fault is supposed to happen and should be ignored.
[*] Otherwise, press any key to reboot and continue rooting.
Press any key to continue . . .
And yes, I am aware that for some people, although they experienced some errors as well, the root worked just well. I do not seem to be one of the lucky ones.
I don't know what I can do anymore. I followed all the steps, everything works except that stupid root.
Edit: I think this has to do with the firmware update which came in during the last days. I installed the update and tried the root just afterwards but got the same "Exploit failed" result. That was the reason why I did a factory reset in the first place.

Sorry dude, the latest update fixed the exploit. The only thing you can do now is wait till some one finds a new exploit. Either that or haope that your micro usb port breaks and then get the main board replaced as that will likely be on old version you can then do the root again, that's hoping the service engineer is feelkng helpful and run all the updates for you.
Cheers
Tom
Sent from my ThinkPad Tablet using Tapatalk

I am the same ,just waiting.....

[Q] Failed Exploit A310_02_0039_0086_US

NOOB at rooting tablet. My build number is A310_02_0039_0086_US.
I've tried everything and kept getting Failed Exploit.
[*] Press any key to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Let's get ready to rumble...
[*] This may take awhile...
[*] Ignore any prompts or pop-ups on your tablet.
375 KB/s (5993 bytes in 0.015s)
[*] Thinkpad Tablet Root Exploit
[*] Copyright (c) 2012 Dan Rosenberg (@djrbliss)
[-] Exploit failed.
[1] Segmentation fault /data/local/tmp/...
[*] If the words "exploit failed" appear above, exit now and try again.
[*] Note: a segmentation fault is supposed to happen and should be ignored.
[*] Otherwise, press any key to reboot and continue rooting.
Press any key to continue . . .

The djrbliss exploit has been patched from the 75 update. As you are on the 86 update it will not work. Go to www.thinkpadtabletforums.com for a more recent exploit that works on your update.

I updated my tablet to 0089( US) and used this method to root. Goodluck.
http://opdecirkel.wordpress.com/2012/03/18/yareftpt/

question
[ThinkPadTablet_A310_02_0024_0060_US.zip
Put it on SD card and plug the SD card in the tablet
I've installed it in recovery mode, wipe/cache, battery discharge and then reboot.
Tried running the batch again and Exploit Failed..
I'm wondering if i can use this method to updated my tablet to 0089( US) and try rooting again.
Any thoughts?]
Factory reset my tablet, everything seems to work right but CMD closes after Step.8
I also checked root checker but still no root..

[Q] Droid razr m Update

i cannot install the jelly bean update on my rooted razr m this is the verizon phone well it was rooted i unrooted it and still cannot anyone else having these problems...

tmathews1988 said:
i cannot install the jelly bean update on my rooted razr m this is the verizon phone well it was rooted i unrooted it and still cannot anyone else having these problems...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1982934
Try reading through this thread. Many users with rooted phones had problems. Can you provide the specific error?

For some reason i lost root also were can i find a dump file to get the error when i tried to install i got the dead droid dude after restart just says update failed no error code...
Sent from my XT907 using xda app-developers app

tmathews1988 said:
For some reason i lost root also were can i find a dump file to get the error when i tried to install i got the dead droid dude after restart just says update failed no error code...
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
If you successfully enter recovery, a log is generated in /cache/recovery titled "last-log". The explicit details of the update procedures are appended to this log. That is where you'll be able to find the error causing your update to fail. Most likely, you have missing or altered files in your system directory. The update confirms the sha1 checksum of each stock apk etc on your phone.
Sent From Space

ok so i got the update didnt think about it but when i rooted last i disable some system apps ya know the ones that come with the phone that are pointless but now i cannot seem to gain roo access again using the motofail2go method... i have my phone in usb debugging and i have the right drivers i re rooted my phone this morning this is what happens when i try to root... i notice it fails to instal package and when i press the power button and up key the vibration is different before there was like a 3 sec delay now none...
[*]
[*] Motofail2Go: Motorola Android Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Tested on Atrix HD, Photon Q, Razr M, and Razr i
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your pho
[*] is connected via USB.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
* server not running *
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Installing fake package...
3674 KB/s (564403 bytes in 0.150s)
pkg: /data/local/tmp/Sudoku.apk
Failure [INSTALL_FAILED_UID_CHANGED]
[*] Preparing for exploit...
2183 KB/s (22364 bytes in 0.010s)
4335 KB/s (843503 bytes in 0.190s)
4241 KB/s (1867568 bytes in 0.430s)
3135 KB/s (64208 bytes in 0.020s)
run-as: Package 'com.motorola.bug2go' is unknown
[*] Please trigger a bugreport on your phone by pressing
[*] Volume Up + Power simultaneously. If successful, your device
[*] will vibrate. Make sure this vibration is distinct from the
[*] vibration that occurs when you turn the volume all the way
[*] down. Press enter once you have successfully triggered a
[*] bugreport.
Press any key to continue . . .
[*] Getting root...
[*] This may take a minute or two.
[-] Exploit failed.
[*] Cleaning up...
Failure
[*] Exploit complete!
[*] Press any key to reboot and exit.
Press any key to continue . . .

tmathews1988 said:
ok so i got the update didnt think about it but when i rooted last i disable some system apps ya know the ones that come with the phone that are pointless but now i cannot seem to gain roo access again using the motofail2go method... i have my phone in usb debugging and i have the right drivers i re rooted my phone this morning this is what happens when i try to root... i notice it fails to instal package and when i press the power button and up key the vibration is different before there was like a 3 sec delay now none...
[*]
[*] Motofail2Go: Motorola Android Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Tested on Atrix HD, Photon Q, Razr M, and Razr i
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your pho
[*] is connected via USB.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
* server not running *
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Installing fake package...
3674 KB/s (564403 bytes in 0.150s)
pkg: /data/local/tmp/Sudoku.apk
Failure [INSTALL_FAILED_UID_CHANGED]
[*] Preparing for exploit...
2183 KB/s (22364 bytes in 0.010s)
4335 KB/s (843503 bytes in 0.190s)
4241 KB/s (1867568 bytes in 0.430s)
3135 KB/s (64208 bytes in 0.020s)
run-as: Package 'com.motorola.bug2go' is unknown
[*] Please trigger a bugreport on your phone by pressing
[*] Volume Up + Power simultaneously. If successful, your device
[*] will vibrate. Make sure this vibration is distinct from the
[*] vibration that occurs when you turn the volume all the way
[*] down. Press enter once you have successfully triggered a
[*] bugreport.
Press any key to continue . . .
[*] Getting root...
[*] This may take a minute or two.
[-] Exploit failed.
[*] Cleaning up...
Failure
[*] Exploit complete!
[*] Press any key to reboot and exit.
Press any key to continue . . .
Click to expand...
Click to collapse
Looks like you'll need to factory reset your phone.
Sent From Space

Re-root after OTA update
I had the same problem. You may need to replace 2 files in teh motofail2go. The "su" and the "Superuser.apk". XDA wouldn't let me paste the exact links I used. Google "how to root razr m" and go to first site. Read a little of that and follow the instruction on replacing those 2 files. After replacing those files, follow the same root procedure. I was successful on the first try.
tmathews1988 said:
ok so i got the update didnt think about it but when i rooted last i disable some system apps ya know the ones that come with the phone that are pointless but now i cannot seem to gain roo access again using the motofail2go method... i have my phone in usb debugging and i have the right drivers i re rooted my phone this morning this is what happens when i try to root... i notice it fails to instal package and when i press the power button and up key the vibration is different before there was like a 3 sec delay now none...
[*]
[*] Motofail2Go: Motorola Android Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Tested on Atrix HD, Photon Q, Razr M, and Razr i
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your pho
[*] is connected via USB.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
* server not running *
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Installing fake package...
3674 KB/s (564403 bytes in 0.150s)
pkg: /data/local/tmp/Sudoku.apk
Failure [INSTALL_FAILED_UID_CHANGED]
[*] Preparing for exploit...
2183 KB/s (22364 bytes in 0.010s)
4335 KB/s (843503 bytes in 0.190s)
4241 KB/s (1867568 bytes in 0.430s)
3135 KB/s (64208 bytes in 0.020s)
run-as: Package 'com.motorola.bug2go' is unknown
[*] Please trigger a bugreport on your phone by pressing
[*] Volume Up + Power simultaneously. If successful, your device
[*] will vibrate. Make sure this vibration is distinct from the
[*] vibration that occurs when you turn the volume all the way
[*] down. Press enter once you have successfully triggered a
[*] bugreport.
Press any key to continue . . .
[*] Getting root...
[*] This may take a minute or two.
[-] Exploit failed.
[*] Cleaning up...
Failure
[*] Exploit complete!
[*] Press any key to reboot and exit.
Press any key to continue . . .
Click to expand...
Click to collapse

tmathews1988 said:
ok so i got the update didnt think about it but when i rooted last i disable some system apps ya know the ones that come with the phone that are pointless but now i cannot seem to gain roo access again using the motofail2go method... i have my phone in usb debugging and i have the right drivers i re rooted my phone this morning this is what happens when i try to root... i notice it fails to instal package and when i press the power button and up key the vibration is different before there was like a 3 sec delay now none...
Click to expand...
Click to collapse
This has already been answered.. stop being lazy and look around to solve the root issue. I created a thread in Q&A a while ago. All your issues are answered in it.
Sent from my XT907 using xda premium