Booting multiple roms question - Nexus 10 Q&A, Help & Troubleshooting

Hi there guys!
I have rooted and unlocked the bootloader for my Nexus 10, and just wondering how do i go about installing & booting multiple roms? Do i need some special software?
Thanks!

chronosoft said:
Hi there guys!
I have rooted and unlocked the bootloader for my Nexus 10, and just wondering how do i go about installing & booting multiple roms? Do i need some special software?
Thanks!
Click to expand...
Click to collapse
I always find zedomax's videos to be extremely helpful for visuals. He also shows how to load custom roms.
http://forum.xda-developers.com/showthread.php?t=1997227
You'll need to download a recovery program like Clockwork Recovery or TWRP. Both have official websites with the latest release of their recovery programs. Just Google them.

DizoAZ said:
I always find zedomax's videos to be extremely helpful for visuals. He also shows how to load custom roms.
http://forum.xda-developers.com/showthread.php?t=1997227
You'll need to download a recovery program like Clockwork Recovery or TWRP. Both have official websites with the latest release of their recovery programs. Just Google them.
Click to expand...
Click to collapse
Thanks for the reply, I have TWRP installed, so do i just flash the downloaded rom as per normal and use TWRP? Is there an option in TWRP?
Thanks!

chronosoft said:
Thanks for the reply, I have TWRP installed, so do i just flash the downloaded rom as per normal and use TWRP? Is there an option in TWRP?
Thanks!
Click to expand...
Click to collapse
Yeah, so for example. Download CleanROM which is pretty much a stock ROM and all functions of the tablet seem to work that I've tried so far, GPS, WiFi, Camera. Haven't tried HDMI or Audio port yet. Microphone works too.
http://forum.xda-developers.com/showthread.php?t=2113048
Once you download the .zip file for CleanROM to your tablet, it will be in the Downloads directory under the directory /sdcard/0/Dowload.
Then reboot in to fastboot by holding down the volume +/- at the same time along with the power button held. Once you get to the fastboot screen, use the volume rocker until you see Recovery Mode, then hit the power button. This should put you in to TWRP which you said you have loaded as the recovery program. I have Clockwork, it's just a different recovery program, but I've used both before fine. Watch this for TWRP and how to make backups. http://youtu.be/EDZ1WAwXvbE?t=1m30s
Normally, I do a complete clean install each time, but I've also been successful loading from one rom to another and not performing the factory reset. As long as you don't perform the factory reset your apps and settings should remain.
However, I'm a person who likes to do a clean install, so I usually wipe all cache options first, then perform a wipe/data/factory reset and load the rom I want. From there, there should be an option to install from a .zip file, that is where you would go to load the custom rom, then select it and let it do its thing. After installing the ROM, I repeat the steps of wiping cache and factory reset after the ROM install is complete, before I reboot the tablet. Once I do all that, I reboot the tablet and let it load.
People say you should perform a backup of your existing ROM/Settings by using the recovery program to do so, that's really up to you if you want to do it, but it does provide a method to restore your prior rom/settings. I don't, because I just got the tablet and don't have a lot of settings/programs installed at the moment.
If for some reason your tablet just gets stuck at the Nexus X when loading, you may need to perform the wipe data/factory reset from Recovery. If you need to do it from the PC, you can load in to Fastboot (power and volume +/-) let it sit there with your USB cord connected and from your PC go to the directory with fastboot.exe and run "fastboot -w" to wipe. You will lose all your settings and programs just like when doing the wipe through recovery.
Hope this helps. Note, some ROM's suggest loading GApps, I haven't messed with those ROMs yet, but imagine it just requires installing a 2nd .zip file after installing the rom .zip file with recovery.

ah that's how it's done. Thanks for clarifying this DizoA, that's really helpful, appreciate it!

Related

Solved:I guess I'm stuck in boot loop....now what?

Ok guys..... newbie here .... literally I'm new to Boot unlocking, root, Flashing etc.
Anyway I have followed this forum for so long that I decided to take plunge yesterday and get my hands dirty.
Here is what I did:
Unlock bootloader, root and install recovery on my Atrix 4G. Atrix was @ 2.3.4 and 4.5.91 during unlocking & root.
Rebooted the phone and everything seems to be in place. Atrix loaded like the way I bought it 7 months back. No problem until now.
Also created a restore folder on my external SD. Worked fine and was successful in creating backup with time stamp
Now here are my steps and subsequent issues that I'm facing:
1. Downloaded CM9 zip file from this thread(http://forum.xda-developers.com/showthread.php?t=1500535) along with Gapps to my external SD
2.Entered recovery mode during bootup and tried to flash CM9 and Gapps. Flashing seem to have gone well and completed (note I did not do clear data, clear cache or clear dalvik cache under advanced options being a newbie)
3. Reboot the phone and can only see red Moto logo and unlocked on top. Left for about 5 minutes and nothing happened.
4.Did a battery pull and entered recovery mode. wiped data, cache & cleared dalvik cache
5.Went to Install zip from sdcard option and tried to reflash CM9. Flashing seems to have gone well and completed
6. Reboot phone and again can only see Moto Red logo with unlock on top and nothing more.
7.Battery pull followed by recovery. But This time I tried to restore from my external SD. also wiped data, cache & dalvik cache
8.Restore took about 3 minutes and completed.
9.Reboot the phone. Now the phone boots and goes to Rethink possible screen and get sstuck.
10. Left it for 1 hr....nothing.
11.tried steps 7-9 again and still stuck in "Rethink possible" screen during boot.
What did I do wrong? Did I soft brick the phone? I can still enter recovery mode and read my internal and external SD and can see all files. i hope I didn't brick my phone doing this. If I did, I would regret!
Here are my options:
1.Try a stable ROM like CM7 and see what happens. I didn't want to do too much damage so haven't tried this option yet.
2.I know there is a way to hide 'unlock' during boot up (if someone can point to it obviously). Hide the 'unlock' and return the phone to ATT and tell them that phone would not boot after 2.3.6 update and get a refurbished one
Please let me know what your thoughts are. I'm currently crapping on my pants
Edit: I just tried Newtrino rom and stuck @ Moto screen which says unlock.
Edit 3/4/2012: Please go to the last post for the solution. Tenfar's CWM is old and cannot deal with latest ROMs. Use ROMRACERS latest CWM or touch based Koush's CWM for future ROM flashing.
Old CWMs will give you sleepless nights!
Ok tried restore again after wiping data, cache & dalvik cache.
Now after reboot, My Moto Logo screen says unlock and just starts flashing.
I can still get into recovery......
can someone please help me......
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
vsg005 said:
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
Click to expand...
Click to collapse
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Masterguy said:
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Click to expand...
Click to collapse
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
littleemp said:
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
Click to expand...
Click to collapse
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
flash the latest recovery and wipe everything in recovery and flash neutrino again. It should work after that. try neutrino 2.2 though. 2.5 still has it's kinks.
1st off, relax. It's difficult to brick your phone from this point Just don't get any bright ideas with .sbfs lol.
As others have said, make sure you're on latest recovery.
Question: are you installing from internal or external SD? Internal is recommended for flashing most ROMs.
Sent from my MB860 using xda premium
Masterguy said:
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
Click to expand...
Click to collapse
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Solved:boot loop issue
littleemp said:
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Click to expand...
Click to collapse
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Masterguy said:
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Click to expand...
Click to collapse
Thank you sooo much. I was having this exact problem. I did what you suggested and my phone works. Thanks!

can't change TWRP 2.1.1 settings to stop official recovery from reinstalling

Hi all,
I have a Nexus 7, rooted, running stock 4.1.1 rom, and just installed TWRP 2.1.1
I have been reading this thread, http://forum.xda-developers.com/showthread.php?t=1779092 , however I cannot post on the thread due to being a new/low post count member.
I read that, and it does happen, that each time I reboot, the stock recovery reinstalls itself.
I attempted to follow this....
NOTE: The stock ROM may automatically replace TWRP with the stock recovery. To prevent the stock ROM from replacing TWRP, boot TWRP, go to the mount menu and mount system, press the home button, then press Advanced -> File Manager. Browse to /system and select the file named recovery-from-boot.p then choose to rename the file to recovery-from-boot.bak
Click to expand...
Click to collapse
but it doesn't seem to work.
Firstly, when I go to the "Mount" menu, there is only 3 entries.....1 large button which says "Mount USB Storage", and 2 boxes which are selected with a cross in the box, "Unmount Data", and "Unmount Cache". If I do press Mount USB Storage I can only Unmount it to return to menu.
So regardless of that part, if I then go to the file manager, and browse to the system folder, the folder shows up empty, and the only thing showing is a Bin subfolder (also empty)
any ideas whats wrong?
Use the one-click root tool. Install TWRP via GooManager. Profit.
Sent from my Nexus 7
TheBiles said:
Use the one-click root tool. Install TWRP via GooManager. Profit.
Sent from my Nexus 7
Click to expand...
Click to collapse
hi,
yeah I did use the tool, all is rooted fine. If you install TWRP from GooManager, and then press to reset to recovery, TWRP loads fine. Once you reboot again however, the stock roms overwriting the TWRP so it no longer works each time. The steps there were supposedly to stop this from happening, from within TWRP, however the options aren't even there. Sadly, I can't post in the TWRP thread due to having less than 10 posts
How r u booting into recovery? Do u power off then use button combo? I use quickboot from market. Its free and boots u into recovery without having to manually turn off the device. I had the same exact issue u drescribe when attempting to follow op instructions. I couldn't do it so I said what the hell, let me see if I boot into recovery using quickboot it overwrites. I was happy to discover that it didn't.
Sent from my EVO using Tapatalk 2
Hi.
I booted into recovery directly from the GooManager option which restarts it into it for me. After a reboot though choosing the same option gives the official recovery I presume (android robot with chest open and exclamation mark)....until I tell it to install the OpenRecoveryScript again
I'm not familiar with Quickboot - take it its just a button to press to get it into recovery the same way as the GooManager option of "Reboot Recovery"?
I'm looking at this TeamEOS nightly build at the moment, toying with the idea of whether to stick with stock rom or flash their custom rom over it.....hard call as its still early days for the roms I think, but if spend ages again installing my apps, will have to do it again afresh when do eventually change the rom
Midnight Tboy said:
Hi.
I booted into recovery directly from the GooManager option which restarts it into it for me. After a reboot though choosing the same option gives the official recovery I presume (android robot with chest open and exclamation mark)....until I tell it to install the OpenRecoveryScript again
I'm not familiar with Quickboot - take it its just a button to press to get it into recovery the same way as the GooManager option of "Reboot Recovery"?
I'm looking at this TeamEOS nightly build at the moment, toying with the idea of whether to stick with stock rom or flash their custom rom over it.....hard call as its still early days for the roms I think, but if spend ages again installing my apps, will have to do it again afresh when do eventually change the rom
Click to expand...
Click to collapse
Yes quickboot is as u describe. I know what u mean about starting to flash. It's a bit early for me considering conditions of the roms ( early stages). I am getting tempted tho...lol. won't be long I'm sure.
Sent from my EVO using Tapatalk 2
pathtologos said:
Yes quickboot is as u describe. I know what u mean about starting to flash. It's a bit early for me considering conditions of the roms ( early stages). I am getting tempted tho...lol. won't be long I'm sure.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
yup....just installed Quick Boot (Reboot),
chose Recovery, and again its rebooting back to the original recovery instead of the TWRP.
Guess I'll have to flash to a custom rom to get around it if want it sorting now....or wait till I have the minimum post count to post on the main TWRP thread
Not end of the world to reinstall apps and games I guess when the custom roms are more mature, so long as I remember to use Titanium Backup to save my games progress
you need to rename the recovery-restore.sh file in /system/etc/ (I forget the name offhand - if you look at the filenames there you'll figure it out). It restores the stock recovery at every reboot unless deleted or renamed. Then flash your 3rd party recovery.
Hi,
thats the trouble.....I use the file manager in TWRP, and I can't see that file anywhere.
The TWRP page says to go to /system......but when I go there its empty, only one subfolder, /system/bin, which also shows up empty

GT-I9505 Constantly restarting

Hi all
Got an I9505 on O2 and since lollipop update it restarted a few times by itself. Now it keeps going into a loop where it will restart and the home screen loads, you can use it for about 20-30 seconds and it will reboot again!
Initially when I researched I though it was an app problem but couldn't find the culprit. Then I took it into the Samsung repair centre and they said it needed a clean flash by them. This didn't work and they fitted a new mother board and this still hasn't worked.
I can say that it has twice happened when the Wifi hasn't been working properly so I have turned it off but other than that I have no idea!
Also I have tried rebooting into safe mode but it still does it, aaarrrggghhhh!!!
Any ideas where I can go from here please?
P
Return to kitkat if you can. Otherwise use a custom rom. These would be my suggestions. Since Samsung's repair couldn't fix it, warranty should not be a problem anymore.
Thanks, I am more than willing to try a Custom ROM. Any recommendations? And how easy is it as never done before!
PJBXDA said:
Thanks, I am more than willing to try a Custom ROM. Any recommendations? And how easy is it as never done before!
Click to expand...
Click to collapse
It's fairly easy. Depending on what S4 model you have. Some models have a locked bootloader and that makes the whole thing trickier.
This is what I did:
1) Root with CF-Auto-Root. Thread here.
2) Backup all my apps.
3) Install a custom recovery (TWRP). Download and instructions here.
4) Flash custom rom. Most roms have their own instructions.
You can skip 1 and 2 if you don't want to backup.
Installing a custom recovery can be done using Odin. I recommend TWRP since it's the only one I've used.
Lollipop GPE rom. I've used this rom and didn't have any issues. CM12 seems a bit faster, but the GPE was more stable and bug-free.
Thanks I tried to install the CM12 before you posted using the instructions there but it failed, I assume that it needs to be rooted.
PJBXDA said:
Thanks I tried to install the CM12 before you posted using the instructions there but it failed, I assume that it needs to be rooted.
Click to expand...
Click to collapse
You need a custom recovery to install any rom. It doesn't matter if it's rooted or not.
Get a custom recovery. Get all the necessary zip files (rom, gapps, etc). Place all the zip files on the external sd card. Boot into the custom recovery. Wipe /data, /cache and /dalvik-cache.
Go to Install (if on TWRP), go to the location where you saved the downloaded rom zip and select it. The swipe the slider to begin flashing. Afterwards flash the gapps zip. Reboot.
Also, don't use the recovery posted in the CM12 thread. It was specially made by the dev and will convert your file system to f2fs. What it basically means is that it will wipe your internal storage completely.
GDReaper said:
You need a custom recovery to install any rom. It doesn't matter if it's rooted or not.
Get a custom recovery. Get all the necessary zip files (rom, gapps, etc). Place all the zip files on the external sd card. Boot into the custom recovery. Wipe /data, /cache and /dalvik-cache.
Thanks, doing that now
Click to expand...
Click to collapse
PJBXDA said:
GDReaper said:
You need a custom recovery to install any rom. It doesn't matter if it's rooted or not.
Get a custom recovery. Get all the necessary zip files (rom, gapps, etc). Place all the zip files on the external sd card. Boot into the custom recovery. Wipe /data, /cache and /dalvik-cache.
Thanks, doing that now
Click to expand...
Click to collapse
On the CF-Root page it says to open Odin and click on the PDA button but I cannot find a PDA button!
Edit: It is the AP button on the newer version!
Click to expand...
Click to collapse
GDReaper said:
You need a custom recovery to install any rom. It doesn't matter if it's rooted or not.
Get a custom recovery. Get all the necessary zip files (rom, gapps, etc). Place all the zip files on the external sd card. Boot into the custom recovery. Wipe /data, /cache and /dalvik-cache.
Go to Install (if on TWRP), go to the location where you saved the downloaded rom zip and select it. The swipe the slider to begin flashing. Afterwards flash the gapps zip. Reboot.
Also, don't use the recovery posted in the CM12 thread. It was specially made by the dev and will convert your file system to f2fs. What it basically means is that it will wipe your internal storage completely.
Click to expand...
Click to collapse
When you say go to install, do you mean install update... in the recovery menu? I do not have an install from zip option
PJBXDA said:
When you say go to install, do you mean install update... in the recovery menu? I do not have an install from zip option
Click to expand...
Click to collapse
You don't have a custom recovery installed. That is probably the stock recovery. You can't flash a rom using the stock recovery.
You absolutely need a custom recovery if you want to flash a custom rom.
Custom recoveries are: TWRP (Team Win Recovery Project), CWM (ClockworkMod Recovery) and PhilZ Touch Recovery. Either one should work. But you necessarily need one.
GDReaper said:
You don't have a custom recovery installed. That is probably the stock recovery. You can't flash a rom using the stock recovery.
You absolutely need a custom recovery if you want to flash a custom rom.
Custom recoveries are: TWRP (Team Win Recovery Project), CWM (ClockworkMod Recovery) and PhilZ Touch Recovery. Either one should work. But you necessarily need one.
Click to expand...
Click to collapse
Thanks I have installed TWRP, then it asked me to install Busybox which I did. Tried to Install from Zip and it went back to the original recovery and now when I am trying to restart the phone I just get messages telling me things have stopped working (Google play, settings etc etc) and a black screen!
Currently factory resetting and will try again
PJBXDA said:
Thanks I have installed TWRP, then it asked me to install Busybox which I did. Tried to Install from Zip and it went back to the original recovery and now when I am trying to restart the phone I just get messages telling me things have stopped working (Google play, settings etc etc) and a black screen!
Currently factory resetting and will try again
Click to expand...
Click to collapse
Follow the link I gave you. They have several instrunctions on how to install TWRP. You can install TWRP with Odin too.
Here, There are 3 ways to install. Use Odin. It doesn't require root and should be the easier one. Just UNTICK auto-reboot in Odin before flashing. Once it's done, turn the phone off and use the key combo to get into TWRP recovery.
GDReaper said:
Follow the link I gave you. They have several instrunctions on how to install TWRP. You can install TWRP with Odin too.
Here, There are 3 ways to install. Use Odin. It doesn't require root and should be the easier one. Just UNTICK auto-reboot in Odin before flashing. Once it's done, turn the phone off and use the key combo to get into TWRP recovery.
Click to expand...
Click to collapse
I think I am in, got through to the TWRP recovery and flashed the files but now I have a blue face with a pulsing white light behind it and have had for about 10 minutes. Any idea what is happening please?
PJBXDA said:
I think I am in, got through to the TWRP recovery and flashed the files but now I have a blue face with a pulsing white light behind it and have had for about 10 minutes. Any idea what is happening please?
Click to expand...
Click to collapse
I guess that's the CM12 logo. First boot after flashing always takes some time because the rom is configuring stuff.
If you still don't get into android, turn off the device and turn it on again. If you've done everything correctly there is no reason why it shouldn't boot.
GDReaper said:
I guess that's the CM12 logo. First boot after flashing always takes some time because the rom is configuring stuff.
If you still don't get into android, turn off the device and turn it on again. If you've done everything correctly there is no reason why it shouldn't boot.
Click to expand...
Click to collapse
It is their logo but it seems to be taking forever, any idea how long a first boot should take?
PJBXDA said:
It is their logo but it seems to be taking forever, any idea how long a first boot should take?
Click to expand...
Click to collapse
It shouldn't take that long. For me it always took under 5 minutes. Tell me exactly what you did.
GDReaper said:
It shouldn't take that long. For me it always took under 5 minutes. Tell me exactly what you did.
Click to expand...
Click to collapse
Did as you said, in the end I tried flashing the other GPE ROM and that has worked but I do not really like it. Trying the Cynogen again by downloading direct to the SD card and not copying it over. I want to say a very big thank you GDReaper for all your help, it is and has been very much appreciated.
PJBXDA said:
Did as you said, in the end I tried flashing the other GPE ROM and that has worked but I do not really like it. Trying the Cynogen again by downloading direct to the SD card and not copying it over. I want to say a very big thank you GDReaper for all your help, it is and has been very much appreciated.
Click to expand...
Click to collapse
No problem. You could try a different build. Or you could try a CM12 based rom. SaberMod worked fine for me. And it's the closest to the actual CM12 you can get.
GDReaper said:
No problem. You could try a different build. Or you could try a CM12 based rom. SaberMod worked fine for me. And it's the closest to the actual CM12 you can get.
Click to expand...
Click to collapse
Cheers, I have CM12 up and running now. Downloaded the files straight to the SD card and they worked. Seems OK but might try others, how do I go about trying SaberMod, do I need to flash that? Sorry to keep asking what are no doubt pretty obvious questions but I'm pretty new to this!
Want to get rid of the google search box for starters!
PJBXDA said:
Cheers, I have CM12 up and running now. Downloaded the files straight to the SD card and they worked. Seems OK but might try others, how do I go about trying SaberMod, do I need to flash that? Sorry to keep asking what are no doubt pretty obvious questions but I'm pretty new to this!
Want to get rid of the google search box for starters!
Click to expand...
Click to collapse
SaberMod is a rom. SaberMod CM12.1.
They are very similar. The difference is how they tackle optimizations.
Yes, you will have to flash it. But you can also stick with normal CM12 if you don't have any issues.
The google search box from the home screen or the recents?
You can change the launcher to get rid of it from the home screen.
To remove it from the recents there is an option somewhere in the settings.

Us996 TWRP not sticking

I'm using the tutorial on the LineageOS wiki for the Us996. I've unlocked the bootloader via official means from LG, but when it comes time to send the recovery via fastboot, it successfully sends and writes it, it even let's me boot into it, after pulling the battery, and using the correct button commands. But if I restart and try to enter again I'm greeted by the official erase everything recovery.
Does anyone know what I'm doing wrong? Do I need to flash root to get the recovery to stick?
Take a look at this video. If you have TWRP installed right, and are going to it through a battery pull and the power button volume down combination, then the screen that comes up looks scary and looks like you'll "format" your phone, but as you see in this video, you don't.
baldybill said:
Take a look at this video. If you have TWRP installed right, and are going to it through a battery pull and the power button volume down combination, then the screen that comes up looks scary and looks like you'll "format" your phone, but as you see in this video, you don't.
https://www.youtube.com/watch?v=https://www.youtube.com/watch?v=tDq0qMbgjL4
Click to expand...
Click to collapse
See I've gotten into TWRP, then I reboot system(actual Android not just restarting recovery).the problem is When I power off my phone and tried to get back into TWRP, I clicked yes and yes and it proceeded to wipe my phone. TWRP wasn't there just factory reset lol
lowsnamebrand said:
See I've gotten into TWRP, then I reboot system(actual Android not just restarting recovery).the problem is When I power off my phone and tried to get back into TWRP, I clicked yes and yes and it proceeded to wipe my phone. TWRP wasn't there just factory reset lol
Click to expand...
Click to collapse
Not sure why it isnt happening automatically (it usually does when flashing things like magisk to root) but when you get into twrp or with root rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak. If in twrp first go into the mount page and uncheck the box at the bottom that says something about system read only first, then you can use the file manager.
Or since it sounds like you want to flash lineage, just flash the lineageos zip (and then optionally opengapps and root). Be sure to format data too (wipe->format data->yes). Then if you dont have lineage on an sdcard ready to go you could reboot recovery so that the formatted data is ready then connect to pc and send the zips over by using adb push C:\path\to\lineage.zip /sdcard/
Phoenix591 said:
Not sure why it isnt happening automatically (it usually does when flashing things like magisk to root) but when you get into twrp or with root rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak. If in twrp first go into the mount page and uncheck the box at the bottom that says something about system read only first, then you can use the file manager.
Or since it sounds like you want to flash lineage, just flash the lineageos zip (and then optionally opengapps and root). Be sure to format data too (wipe->format data->yes). Then if you dont have lineage on an sdcard ready to go you could reboot recovery so that the formatted data is ready then connect to pc and send the zips over by using adb push C:\path\to\lineage.zip /sdcard/
Click to expand...
Click to collapse
What I'm thinking about doing is flashing TWRP again, on first boot(of TWRP) backing up my current rom(stock) and trying to boot into recovery again, because if it doesn't stick again, it'll wipe but at least I'll have a backup.
I've noticed a lot of different root files which would you recommend?
lowsnamebrand said:
What I'm thinking about doing is flashing TWRP again, on first boot(of TWRP) backing up my current rom(stock) and trying to boot into recovery again, because if it doesn't stick again, it'll wipe but at least I'll have a backup.
I've noticed a lot of different root files which would you recommend?
Click to expand...
Click to collapse
Sorry for the double post but does the "LG factory reset" stay even after having TWRP installed? Like will I always have to answer yes twice to enter TWRP?
lowsnamebrand said:
Sorry for the double post but does the "LG factory reset" stay even after having TWRP installed? Like will I always have to answer yes twice to enter TWRP?
Click to expand...
Click to collapse
Yes thats always the same.
If you don't flash lineage or something to root stock (I reccommend magisk since the alternative, Supersu, is owned by some Chinese company, and magisk has various modules that do many things) and don't rename /system/recovery-from-boot.p manually (theres a file manager under advanced in twrp) the stock rom will use that file to reflash stock recovery any time it boots.
Phoenix591 said:
Yes thats always the same.
If you don't flash lineage or something to root stock (I reccommend magisk since the alternative, Supersu, is owned by some Chinese company, and magisk has various modules that do many things) and don't rename /system/recovery-from-boot.p manually (theres a file manager under advanced in twrp) the stock rom will use that file to reflash stock recovery any time it boots.
Click to expand...
Click to collapse
Awesome I think my issue is not renaming that file and the stock rom reinstalling stock recovery. I've used SuperSU, never used magisk, is there a stickied release thread for it?
lowsnamebrand said:
Awesome I think my issue is not renaming that file and the stock rom reinstalling stock recovery. I've used SuperSU, never used magisk, is there a stickied release thread for it?
Click to expand...
Click to collapse
Its got more than a thread, has a whole section. Anyway heres the main release thread
Phoenix591 said:
Its got more than a thread, has a whole section. Anyway heres the main release thread
Click to expand...
Click to collapse
You've been a huge help, thank you! I'll report back later tonight, when I can actually work on my phone
So i was able to obtain root aswell as installed twrp, the only issue I had was every rom I tried refused to boot. They just hung at the loading screen, that includes the back up I'd made of stock, is there something I missed?
lowsnamebrand said:
So i was able to obtain root aswell as installed twrp, the only issue I had was every rom I tried refused to boot. They just hung at the loading screen, that includes the back up I'd made of stock, is there something I missed?
Click to expand...
Click to collapse
If you mean the boot animation, the very first time can take a good while, like 20 minutes. Also make sure you've formatted /data if you havnt yet especially going to lineage.
Phoenix591 said:
If you mean the boot animation, the very first time can take a good while, like 20 minutes. Also make sure you've formatted /data if you havnt yet especially going to lineage.
Click to expand...
Click to collapse
Sorry for the late reply, yeah I think I just let the boot animation go for around 5, I'm gonna have to try reflashing it and hoping for the best, I'll be sure to answer back when I get a chance
OK, I know this is an old thread - but I just got a replacement US996 phone; my old standby has a charger plug problem so I decided to get another one and put a rooted stock Oreo ROM on it. However, I'm having the same issue as the OP. Get into fastboot, flash TWRP (I have the 3.3.1-0 version, as the newer 3.3.1-1 version does not have any download mirrors). The flash appears to go just fine, it says the write was completed. However, when I reboot into adb mode and do "adb reboot recovery" I get "no command" and the little droid with his belly hatch open. So obviously TWRP wasn't flashed. The OP says he eventually was able to get it to work and install root. How did you fix the issue?
Do I still need to do the old recowvery shenanigans that we had to do back when the phone first came out?
Thanks!
I believe you MUST use the button combo to reboot into twrp.
See here:
https://forum.xda-developers.com/v20/development/recovery-twrp-3-2-1-0-t3720239/post78513963
pistacios said:
I believe you MUST use the button combo to reboot into twrp.
See here:
https://forum.xda-developers.com/v20/development/recovery-twrp-3-2-1-0-t3720239/post78513963
Click to expand...
Click to collapse
I've done that. The problem is that TWRP hasn't actually been installed via fastboot flash recovery - it goes through the motions, SAYS it's been installed, but when I do the button combo, it actually does reset my phone rather than booting into TWRP.
---------- Post added at 09:36 AM ---------- Previous post was at 08:55 AM ----------
Disregard the above. Flashed it again (4th time), and it finally took.
The same happened with my wife's US996 now that you mention it. Took a few tries and was a bit frustrating.
When I flashed TWRP on mine it was a "one and done".
Glad you got it sorted.
Thanks - all good. Rooted stock Oreo ROM installed, working great.

SM-J510FN Dual Sim Stuck in TWRP recovery mode

Can anyone help, I rooted my phone last year and installed TWRP as part of the process, I did a backup at the time which I have on my SD card
the phone is stuck in the TWRP recovery mode, I can restore from my backup and it goes through fine but then goes back into recovery mode.
This all started when I tried to reset the phone back to factory defaults. I guess I wiped everything. Has anyone got any ideas how to get out of this.
I am not too familiar with TWRP, if anyone could point me in the right direction with a simple step by step guide it would be most appreciated.
RMEROY said:
Can anyone help, I rooted my phone last year and installed TWRP as part of the process, I did a backup at the time which I have on my SD card
the phone is stuck in the TWRP recovery mode, I can restore from my backup and it goes through fine but then goes back into recovery mode.
This all started when I tried to reset the phone back to factory defaults. I guess I wiped everything. Has anyone got any ideas how to get out of this.
I am not too familiar with TWRP, if anyone could point me in the right direction with a simple step by step guide it would be most appreciated.
Click to expand...
Click to collapse
Download a rom
Put it on your sd card
Put a sd card inside your phone
Then flash your rom
SM-J510FN
amirizad_7436 said:
Download a rom
Put it on your sd card
Put a sd card inside your phone
Then flash your rom
Click to expand...
Click to collapse
I did try that, I found a ROM j510fnxxs2aq14_j510fndbt2aq14_dbt.zip with size of 1,379,794Kb
when I tried to install it I get a failure could not find META-INF/com/google/android/update-binary in the zip file
Error installing zip file /external_sd/j510fnxxs2aq14_j510fndbt2aq14_dbt.zip
Which is why I asked for a bit more detailed advice on my problem. If you could point me in the direction of a suitable
ROM for my device which will work I would appreciate it.
RMEROY said:
I did try that, I found a ROM j510fnxxs2aq14_j510fndbt2aq14_dbt.zip with size of 1,379,794Kb
when I tried to install it I get a failure could not find META-INF/com/google/android/update-binary in the zip file
Error installing zip file /external_sd/j510fnxxs2aq14_j510fndbt2aq14_dbt.zip
Which is why I asked for a bit more detailed advice on my problem. If you could point me in the direction of a suitable
ROM for my device which will work I would appreciate it.
Click to expand...
Click to collapse
Was it stock rom??!!
You should install custom rom man first
amirizad_7436 said:
Was it stock rom??!!
You should install custom rom man first
Click to expand...
Click to collapse
I have tried several custom roms non of which work. What I don't understand is why when I restore from my one and only backup
it all goes through ok the size is 6036MB it reports restoring 7 partitions
then restoring boot then restoring data, at the end of it I get restore ok then it goes back to the TWRP recovery screen.
RMEROY said:
I have tried several custom roms non of which work. What I don't understand is why when I restore from my one and only backup
it all goes through ok the size is 6036MB it reports restoring 7 partitions
then restoring boot then restoring data, at the end of it I get restore ok then it goes back to the TWRP recovery screen.
Click to expand...
Click to collapse
Is your stock rom android 5 by any chance?
I don't know what my stock rom is, I can't access anything on my phone apart from the TWRP recovery screen
I do have another SM-J510FN which was bought at the same time which hasn't been rooted running Android 7.1.1
I don't know if that would help to determine what the stock rom is.
RMEROY said:
I don't know what my stock rom is, I can't access anything on my phone apart from the TWRP recovery screen
I do have another SM-J510FN which was bought at the same time which hasn't been rooted running Android 7.1.1
I don't know if that would help to determine what the stock rom is.
Click to expand...
Click to collapse
Sorry I misread the thread I thought it was 2015 model.
So what exactly did you do? Step by step.
Did you wipe anything in twrp?
RMEROY said:
I don't know what my stock rom is, I can't access anything on my phone apart from the TWRP recovery screen
I do have another SM-J510FN which was bought at the same time which hasn't been rooted running Android 7.1.1
I don't know if that would help to determine what the stock rom is.
Click to expand...
Click to collapse
I went into the TWRP recovery mode then to Wipe hoping to do a factory reset, that went through ok and came back into the TWRP recovery mode
I then tried Advanced wipe and ticked all the boxes except micro SD card. Nothing could get me out of the recovery mode so then I tried a restore from
an old backup and that seemed to go through ok, but it still came back to the recovery mode.
If it was me, I would remove the back cover and via TWRP menu turn off phone.
As soon as the screen goes black, remove battery.
Insert battery and power on and see what happens.
Have you tried that? Or how do you turn it off?
Tab_Triggerhappy said:
If it was me, I would remove the back cover and via TWRP menu turn off phone.
As soon as the screen goes black, remove battery.
Insert battery and power on and see what happens.
Have you tried that? Or how do you turn it off?
Click to expand...
Click to collapse
Many times
Okay... when screen goes black have you tried to quickly start pressing the key combination to enter download mode?
For my J500 it's Volume down + Home key + Power (keep pressing until download screen appears) should be same for J510.
If you can enter download you have the option to use Odin and flash either a stock ROM or a newer Recovery.
If you want, you could:
Advance wipe, everything except SD card and OTG Usb. (How much was backed up? Did you tick all boxes?)
Format Data
Restore backup from SD card again
Advance wipe, tick only 2 boxes, Dalvik + Cache
Restart
Report back
Oh, and just to clarify... when you manually go to Restart in TWRP, no matter what option you choose, the phone restarts into TWRP again?
Bare with me, I'm trying to understand and help.
Thats the problem, I can't get out of the TWRP recovery mode so am not able to use Odin, I presume when I did my original backup
I didn't tick all the boxes because it goes through a recovery with no problem I presume the boot sector is missing.
From the TWRP recovery mode I am able to go to install and select a previously downloaded file but then it fails.
I have searched for a suitable ROM to download but am struggling to find one for my phone
Ok, what TWRP version do you have?
Tab_Triggerhappy said:
Ok, what TWRP version do you have?
Click to expand...
Click to collapse
3.0.2-0
RMEROY said:
3.0.2-0
Click to expand...
Click to collapse
You can update your TWRP with a newer version from here:
https://twrp.me/samsung/j5xnlte.html
(Carefully check that I linked to your model!)
.img is what you want to put in your phone. BUT... I haven't done this myself, so it's your call.
In TWRP you choose to install img and locate the file on your SD card.
My thought is that your TWRP is too old for the ROMs you have tried... (anyone please correct me if I'm wrong).
RMEROY said:
Thats the problem, I can't get out of the TWRP recovery mode so am not able to use Odin, I presume when I did my original backup
I didn't tick all the boxes because it goes through a recovery with no problem I presume the boot sector is missing.
From the TWRP recovery mode I am able to go to install and select a previously downloaded file but then it fails.
I have searched for a suitable ROM to download but am struggling to find one for my phone
Click to expand...
Click to collapse
Man it's not a problem what custom rom you downloaded
Juat install it to system cames up then install stock rom via odin
Why you wasting your time??!!
I have the TWRP image file 3.4.0-0 which partition should I be flashing it to Boot or Recovery?
I would hate kill it after getting this far.
in reply to amirizad_7436 I don't understand, I can't install a stock rom via Odin as I can't get out of the TWRP recovery mode.
RMEROY said:
I have the TWRP image file 3.4.0-0 which partition should I be flashing it to Boot or Recovery?
I would hate kill it after getting this far.
in reply to amirizad_7436 I don't understand, I can't install a stock rom via Odin as I can't get out of the TWRP recovery mode.
Click to expand...
Click to collapse
You can. There is an option to reboot download mode from twrp (might be reboot bootloader)
That will put the device into download mode and you can flash with Odin.
Alternatively you could go to advanced wipe and wipe everything like you already did and then just flash a custom ROM. You wiped everything you said and then tried to reboot. That's why it went to twrp because you wiped system, there is no system to boot anymore.
garylawwd said:
You can. There is an option to reboot download mode from twrp (might be reboot bootloader)
That will put the device into download mode and you can flash with Odin.
Alternatively you could go to advanced wipe and wipe everything like you already did and then just flash a custom ROM. You wiped everything you said and then tried to reboot. That's why it went to twrp because you wiped system, there is no system to boot anymore.
Click to expand...
Click to collapse
Wow, that worked, I updated the version of TWRP and then installed a ROM that I downloaded "resurrectionremix-5.8.4-20190821"
and all seems to be working, both sims are recognised and operational all I need now is to get my head around the UI apart from that everything seems
good. Thank you everybody who helped me through this. I almost got to the point of binning an otherwise good phone.
Once again a big thankyou to everyone.

Categories

Resources