Related
Okay, so I've noticed that on both my lock screen and Clock app, that my alarm clocks don't show up as the Human Readable time format. For example, I have an alarm set for 6am tomororow (1/12/2010), and when the lock screen is showing it has the alarmclock icon and show "1263294000000" next to it, which is the epoch time for 1/12/2010 6:00:00 am. It also does this in the clock app on the app's home screen, but if I go into the alarms screen it shows up fine.
Anyone else experiencing this?
Weird. Mine shows up in a normal time. I've tried looking through the clock app, and system settings and couldn't find a way to replicate your issue.
Since yours is rooted it may have something to do with what youve flashed to it so far.
Or maybe not cause im rooted with cyan and just tried and it appeared fine
JoshHart said:
Or maybe not cause im rooted with cyan and just tried and it appeared fine
Click to expand...
Click to collapse
Lol. Yah. I've got a few friends around here that have basically the same setup. Not really an issue, more a nuisance. But I seriously don't get it. I'll probably try and reset later today and recreate it. I was just curious if any one else noticed this.
Strange.
I have another question for the clock app:
Is there a way to turn off the charging light and the backlight on the capacitive buttons when in the dimmed clock app mode? The screen is actually quite nice and readable in the dark but the bright lights next to it are annoying / wash the screen out some.
Maybe it's something in Locale settings? That's where I'd look.
bradyonly said:
Maybe it's something in Locale settings? That's where I'd look.
Click to expand...
Click to collapse
Trust me, I went through just about every possible 'setting' i could possibly think of. I'm assuming it has something to do with a program i have installed. I haven't had the time to do a reset yet, but plan on giving it a shot later.
Here's what I know though, its not normal, and its not because of root. Seems no one else is having this issue. lol, WTF.
Noticed that my internal storage was running low, even though i hadnt installed any big apps. So, had a look at what was taking up the space.
It turns out it was the settings app! The app itself uses a mere 628KB, but the data usage was over 65MB! So, i did what anybody would do, and clicked 'clear data'.
As far as i can tell, all my phone settings are the same as they were, nothing important has been lost, except for one thing: the wallpaper. This got reset to some default watery pic of a lake with islands in the distance, all very nice i'm sure. But: after clearing data i could no longer change my wallpaper to anything else. It goes through the motions of changing but the end result is that watery blue wallpaper. Very annoying.
Rebooting the phone solved the problem (just force stopping the settings process didnt help) enabling me to change wallpapers again. But i have noticed that after changing wallpapers a few times the data used by the settings app has started to creep up (in multiples of 212kb). Presumably the settings app is cacheing the current wallpaper, which is reasonable, but it also seems to be cacheing every wallpaper you use!
Bug1: settings app is caching all wallpapers ever used, eventually filling internal storage.
Bug2: clearing settings data breaks the ability to change wallpapers until phone is rebooted.
Anyone else noticed this?
Edit: on further tests, the data storage doesnt go up every time, it currently seems to be stuck at 656kb and holding, regardless of how many times i change wallpapers. But *something* definitely caused it to balloon to 65MB...
NOTE: Do Not Apply this mod for Alpha 3, it screws up the status bar. You have been warned. I will see if i can recompile it for Alpha 3, makes it tougher without sources.
Initially i did this mod for my I9000 which was running CM7.1 and i was only seeing carrier numbers instead of names. I have ported this to CM7.1 for HP touchpad. Flash this file in cwm recovery.
When booted up you should see an additional setting in cyanogenmod settings called CustomSettings, tap that to open custom carrier text, tap that and enter whatever you want to show on the lockscreen and notification bar. Press done.
Install the attached notificationrestart.apk and open it, give it root access, press restart and wait for the notification bar to restart. This is to avoid restart of the tablet before you see the new settings apply. Voila, you should see what you put in the custom name. Have fun and hit the thanks button if you like it. Cheers.
If for some reason your status bar looks wonky after a while use this to get back to original stuff. I changed the dpi to 182 using nitrality app and the wonkiness seems to be gone. I am using iKandee theme from market.
Original Mod for I9000 credits
doixanh ( for his ginger DX settings)
ngiordano ( for his helping hand with androiding)
Screenshots of what settings should look like.
I'll give this a shot. Is there an option (perhaps in the future) to place a .png file where the carrier text is? Similar to MIUI? Just curious.
Ok. dl'ing now. I'll report back.
EDIT: It works! My only issues
A) The notificationrestart.apk installed, but didn't seem to do anything. I didn't notice the change until after I rebooted the device.
B) I'm now seeing the 3G bar in the corner (see the image). Is there a way to keep the custom text, but not show the signal bars?
jpmi23 said:
I'll give this a shot. Is there an option (perhaps in the future) to place a .png file where the carrier text is? Similar to MIUI? Just curious.
Ok. dl'ing now. I'll report back.
Click to expand...
Click to collapse
May be. I will look into it at a later time, no promises. If the status bar gets wonky, set dpi to 182 and see if it happens. For me its perfect at 182 (which is what my phone is it)
Sent from my HP Touchpad using Tapatalk
jpmi23 said:
I'll give this a shot. Is there an option (perhaps in the future) to place a .png file where the carrier text is? Similar to MIUI? Just curious.
Ok. dl'ing now. I'll report back.
EDIT: It works! My only issues
A) The notificationrestart.apk installed, but didn't seem to do anything. I didn't notice the change until after I rebooted the device.
B) I'm now seeing the 3G bar in the corner (see the image). Is there a way to keep the custom text, but not show the signal bars?
Click to expand...
Click to collapse
For now no. once cm team publishes source I will recompile with that.that well solve these issues. Did you run the notification restart app? I had to wipe data of that apk using titanium backup and it worked fine after that. 182 dpi works fine. Anything less than that status bar gets wonky.
Sent from my HP Touchpad
krarvind said:
For now no. once cm team publishes source I will recompile with that.that well solve these issues. Did you run the notification restart app? I had to wipe data of that apk using titanium backup and it worked fine after that. 182 dpi works fine. Anything less than that status bar gets wonky.
Sent from my HP Touchpad
Click to expand...
Click to collapse
I attempted, but it did not run. Did not ask for root privileges either. I simply rebooted and it showed the text change.
jpmi23 said:
I attempted, but it did not run. Did not ask for root privileges either. I simply rebooted and it showed the text change.
Click to expand...
Click to collapse
Ya, once you wipe data using titanium back up it will ask for root privileges. Not sure why. 182 and higher dpi works fine.
Sent from my HP Touchpad
jpmi23 said:
I'll give this a shot. Is there an option (perhaps in the future) to place a .png file where the carrier text is? Similar to MIUI? Just curious.
Ok. dl'ing now. I'll report back.
EDIT: It works! My only issues
A) The notificationrestart.apk installed, but didn't seem to do anything. I didn't notice the change until after I rebooted the device.
B) I'm now seeing the 3G bar in the corner (see the image). Is there a way to keep the custom text, but not show the signal bars?
Click to expand...
Click to collapse
is that screen shot from your touchpad? if so what theme is that is looks nice!
Your theme looks great, I also would like to know what it is ?
ks2hot4u said:
Your theme looks great, I also would like to know what it is ?
Click to expand...
Click to collapse
screen shots are from my phone which runs Insanity Rom and its theme.
The screenshot that I posted is in fact my TP. I'm using the Transformer theme from HERE. It ties in with CM's ThemeChanger. It'll notify you that it's not meant for your device, just do it. As you can see it works fine.
jpmi23 said:
The screenshot that I posted is in fact my TP. I'm using the Transformer theme from HERE. It ties in with CM's ThemeChanger. It'll notify you that it's not meant for your device, just do it. As you can see it works fine.
Click to expand...
Click to collapse
thank u sir!
@krarvind
thanks for this! no issues on my TP so far.
as a little test i flashed this to my T-MoUS HD2 Leo since i could never find a way to set a custom carrier label.
it works great on there as well - with one side effect on the lockscreen. any chance this can be fixed? i just did it on a whim since it's cm7 i figured it couldn't do to much damage. no problems on the status bar, just the lock screen.
i know it wasn't built for this device so don't answer if you don't want to
the top near my label shows a graphic from i don't know where.
pxldtz said:
@krarvind
thanks for this! no issues on my TP so far.
as a little test i flashed this to my T-MoUS HD2 Leo since i could never find a way to set a custom carrier label.
it works great on there as well - with one side effect on the lockscreen. any chance this can be fixed? i just did it on a whim since it's cm7 i figured it couldn't do to much damage. no problems on the status bar, just the lock screen.
i know it wasn't built for this device so don't answer if you don't want to
the top near my label shows a graphic from i don't know where.
Click to expand...
Click to collapse
I have no idea where that comes from and i don't have your device, so i can't really fix it i think. if you want to roll back, all you need to do is open up my zip files and replace the app and framework files with the ones from the rom for your phone ( not from your phone as it has mine now).
Cheers
For some reason whenever i try to boot a custom carrier label my Touchpad never boots up... it just hangs on the cyanogen mod boot animation and requires a hard reset... followed the instructions perfectly. anyone have the same issue?
after some messing around i got it to boot up for me. then the notification bar went "wonky" used the nitrality app to adjust the dpi. works fine. what is the default dpi again?....
KingKwentyne said:
For some reason whenever i try to boot a custom carrier label my Touchpad never boots up... it just hangs on the cyanogen mod boot animation and requires a hard reset... followed the instructions perfectly. anyone have the same issue?
after some messing around i got it to boot up for me. then the notification bar went "wonky" used the nitrality app to adjust the dpi. works fine. what is the default dpi again?....
Click to expand...
Click to collapse
No idea why you have these issues. dpi is 182. Anything above that works fine. Remember I don't have the sources to compile it for touchpad, so I did my best to get it
working
Sent from my HP Touchpad using xda premium
Screwed up my notification bar, the resolution is way off and battery percentage is gone. Cyanogenmod won't let me add it either?? The OriginalLabel.zip doesn't have battery percentage either for some reason. Guess I'll do a restore in Recovery. Thanks for trying though.
I have noticed minor issues cyanogen 12s issues on the ONEPLUS ONE. Anyone with issue can can report them here. Hopefully everyone here has a work around or modification to fix the issue.
BT headset, have 3 different one. Pressing the button will kill the call while on GV. IDEAS?
I'm occasionally seeing the lockscreen flash up when turning the screen off.
Also, if there's a way to disable the lockscreen transparency I'd be interested to hear it - it looks rubbish.
Seeing the old issue of the notification drawer appearing in/after calls, too. Hadn't had this for a while on latest nightlies
benj! said:
I'm occasionally seeing the lockscreen flash up when turning the screen off.
Also, if there's a way to disable the lockscreen transparency I'd be interested to hear it - it looks rubbish.
Click to expand...
Click to collapse
Set a wallapaper through Theme and click the wench thingy and find edit lockscreen wallpaper
There's also a bug you could use the physical buttons for idk what reason to fix it go to settings and disable then enable the on-screen keys
another bug my settings keep crashing for no reason ._.
Lag on launcher3 while opening the app drawer.
Tarun95 said:
Lag on launcher3 while opening the app drawer.
Click to expand...
Click to collapse
I solved doing the setup again after wipe...
Tarun95 said:
Lag on launcher3 while opening the app drawer.
Click to expand...
Click to collapse
yes same here!!
Google play services wakelock still exists....
L10nH34Rt said:
Google play services wakelock still exists....
Click to expand...
Click to collapse
Go to Google play services in privacy guard and deny it the permission to keep awake. Then reboot.
---------- Post added at 06:00 PM ---------- Previous post was at 05:59 PM ----------
fbr79 said:
I solved doing the setup again after wipe...
Click to expand...
Click to collapse
I don't want to reset my phone lol. Everything is working fine other than that.
color os camera problem
It worked perfectly on kitkat .
After updating to lollipop (official update) cm 12s , it seems to show some problem.
I can't see any live preview of the effects. It just shows the normal camera without any effects. But after I click, the picture comes with effect. So its just a problem about the live preview of the effects. Has anyone else experienced this problem ? Plz help me.
The now infamous two halves in pictures with flash are still there. I wonder if the community could extract the camera driver from oxygenOS kernel sources (when OP will finally release them) and use them, since it doesn't happen on that ROM.
Tarun95 said:
Go to Google play services in privacy guard and deny it the permission to keep awake. Then reboot.
Click to expand...
Click to collapse
I prefer using this method. Much cleaner IMO.
benj! said:
I'm occasionally seeing the lockscreen flash up when turning the screen off.
Also, if there's a way to disable the lockscreen transparency I'd be interested to hear it - it looks rubbish.
Seeing the old issue of the notification drawer appearing in/after calls, too. Hadn't had this for a while on latest nightlies
Click to expand...
Click to collapse
I think the lockscreen flashing after the screen turns off is a lollipop thing. I noticed it when I had a nexus 5 and upgraded to 5.0. I think I noticed it out of the corner of my eye so to speak, after I had set my phone down and the screen timed out, thought it flickered/flashed but that's just the screen off animation now.
Still playing around with all the settings to see what's new (and removed) and noticed:
No longer have the ability to configure the auto-brightness settings which I actually quite liked in 11S if for no other reason that I could set the auto brightness for low light down to 0% (instead of the, what... 5% normal setting?).
Screen Color calibration wouldn't work and crashed the settings app (screen went black and I couldn't get back into settings). A reboot seems to have fixed it.
The settings app may just be buggy as it crashed again when trying to access Developer Options (screen went black and required a reboot).
EDIT: Couldn't sign into my Cyanogen account but that could be a problem on Cyanogen's side as it didn't recognize my account.
Still seems like there are a lot of new things to try and there are more options than Oxygen OS.
Switching profiles:
from owner to guest: Cyanogenmod-log crashes
from guest to owner: code to unlock phone isn't shown and no matter what you type, it always incorrect. Fixed by rebooting
Fr3lncr said:
Still playing around with all the settings to see what's new (and removed) and noticed:
No longer have the ability to configure the auto-brightness settings which I actually quite liked in 11S if for no other reason that I could set the auto brightness for low light down to 0% (instead of the, what... 5% normal setting?).
Screen Color calibration wouldn't work and crashed the settings app (screen went black and I couldn't get back into settings). A reboot seems to have fixed it.
The settings app may just be buggy as it crashed again when trying to access Developer Options (screen went black and required a reboot).
EDIT: Couldn't sign into my Cyanogen account but that could be a problem on Cyanogen's side as it didn't recognize my account.
Still seems like there are a lot of new things to try and there are more options than Oxygen OS.
Click to expand...
Click to collapse
no problem like yours.
but there's no led notification (when lock and screen on) only ambient flashed-up display.
i do agree that autobrightness is not working like in cm11s.
But, i do have those problems after flashing from stock cm11s 05Q and via bootloader with fastboot image from the cyngn.
And cm12s from cm11s is have this kind of lagging typing/touching to be compared if you were flashing from cm12/cm12.1, strange indeed.
I'm back on nightlies. CM12S ain't for me, thought OxygenOS was better
Lags on interactive governor
Hi guys, did you notice any lags on interactive governor in games ? It lags on cm11s too, I thought that they will fix it in today released cm12s. It didn't happen before brick of my phone, since unbrick and flash of cm11s, games are lagging so much on interactive governor. Do you know how to fix that without any change of governor, hotplug or profiles ? Thanks a lot.
Com. Google. Gapps. Continual fc so rapid about impossible use phone.. Back to O2 for now which is very smooth
All of you with issues, did you dirty flash or wipe first? it DOES matter...
I have tried everything, changing screen resolution, DPI, screen zoom, etc. But I just cannot stop the screen from going below the bottom of the phone. Happening on the lockscreen and a few others, strange thing is does not happen on all apps.
Does anyone know how you stop this? Thank you.
Hi,
not sure it'll help, but under settings, there in the display settings is a option for "full screen apps"
Give it a try?
Did you try doing a factory reset
No I haven't done a factory reset as that is really the only issue, and everything else is running like a charm. Don t think it deserves hours of setting up again and no guarantees that it fixes the problem.
It's Lockstar causing that behaviour...
Give it up. Use the stock lockscreen.
That's what I did... Lockstar many times give me weird elements positioninig
feneso said:
It's Lockstar causing that behaviour...
Give it up. Use the stock lockscreen.
That's what I did... Lockstar many times give me weird elements positioninig
Click to expand...
Click to collapse
Tried that, stock lock screen still does exactly the same. And it cuts off a few other app menus, but not all which is weird.
Strange thing I have noticed, I was playing a game waiting for the doctor yesterday, when I was called I switched off the screen without exiting the game. Later when I turned on the screen again all the icons were visible in the right places. Some kind of DPI graphics change when the game runs I imagine?
Found the issues causing this problem.
I enabled navigation gestures in settings rather than navigation buttons.
Fluid Navigation was set to hide navigation bar, I set this to do not hide.
Both the lockscreen and all other offsets no longer occur.