Related
After I got my new nexus, I decided to root it. I used mskips toolkit with 4.1 and it worked like a beaut. But I can't for the life of me root 4.1.2.
Checklist:
Downloaded the drivers succesfully
Can enter ADB succesfully. Under device manager it says "Google Nexus 7 ADB interface"
Tried WugFresh's toolkit
Unlocked bootloader
Tried installing custom recovery (see below)
(Checklist to know what I have done, for people to help me and future people with problems)
The reason adding CWM or TWRP doesn't work is because the device can't be rooted. You need to be rooted to change recovery file names, and whenever I boot recovery, I get the dead android and a red ! (stock recovery).
When it sees if busybox is installed, and sends the command, it comes back negative.
I'm having the exact same problem -- generating the same set of error messages as you show at the top of your screen capture. I bought a new Nexus 7 32GB and updated it to 4.1.2 before trying to root it. At the time I hadn't read anything that told me this might be a bad idea. I figured -- update to the latest version then root it. I've tried changing how I have it connected (media or camera), what USB port I connect to, what USB cable I use, which boot options I select -- NOTHING makes a difference. I have gotten my bootloader to unlock, or so it seems, as I've got the unlocked padlock image during boot up. But I'm totally stuck on how to proceed to get root.
lesdense said:
I'm having the exact same problem -- generating the same set of error messages as you show at the top of your screen capture. I bought a new Nexus 7 32GB and updated it to 4.1.2 before trying to root it. At the time I hadn't read anything that told me this might be a bad idea. I figured -- update to the latest version then root it. I've tried changing how I have it connected (media or camera), what USB port I connect to, what USB cable I use, which boot options I select -- NOTHING makes a difference. I have gotten my bootloader to unlock, or so it seems, as I've got the unlocked padlock image during boot up. But I'm totally stuck on how to proceed to get root.
Click to expand...
Click to collapse
When you run wugs toolkit to root, does it reboot your nexus? I have not rooted a 32GB yet but I have done a 16GB on 4.1.2 factory image without any problems.
There is nothing different between rooting an 8/16GB unit versus the 32GB ones. Nor does 4.1.1 or 4.1.2 matter.
I bought a 32GB one a few days ago, upgraded to 4.1.2, and had the bootloader unlocked, custom recovery installed and device rooted in about 5 minutes.
The issues you are having are why I hate these "toolkits". They don't always work properly, and when they fail, the user has no idea what's going on. It's much better for people to actually perform the steps manually so that they understand what's going on behind the scenes. Because when you understand, you can better troubleshoot problems.
Based on the errors, it looks like the toolkit failed to remount /system as writable. As such, it couldn't push the APKs for superuser, nor make the su binary suid root. Which of course would break the rest of the install script.
It's a very simply process and doesn't need a toolkit. Use the android development toolkit tools adb and fastboot.
1) adb reboot bootloader
2) fastboot oem unlock
(select yes on tablet)
3) fastboot reboot-bootloader
(confirm bootloader is unlocked)
4) fastboot erase recovery
5) fastboot flash recovery <recovery.img>
(recovery.img should be a downloaded custom recovery file - CWM or TWRP, your choice).
6) Reboot into recovery
7) adb push <superuser.zip> /sdcard/superuser.zip
(superuser.zip should be whatever recovery flashable 'root' zip you want to use).
8) Using recovery, flash the zip file.
9) Reboot
10) Done.
phonic said:
There is nothing different between rooting an 8/16GB unit versus the 32GB ones. Nor does 4.1.1 or 4.1.2 matter.
I bought a 32GB one a few days ago, upgraded to 4.1.2, and had the bootloader unlocked, custom recovery installed and device rooted in about 5 minutes.
The issues you are having are why I hate these "toolkits". They don't always work properly, and when they fail, the user has no idea what's going on. It's much better for people to actually perform the steps manually so that they understand what's going on behind the scenes. Because when you understand, you can better troubleshoot problems.
Based on the errors, it looks like the toolkit failed to remount /system as writable. As such, it couldn't push the APKs for superuser, nor make the su binary suid root. Which of course would break the rest of the install script.
It's a very simply process and doesn't need a toolkit. Use the android development toolkit tools adb and fastboot.
1) adb reboot bootloader
2) fastboot oem unlock
(select yes on tablet)
3) fastboot reboot-bootloader
(confirm bootloader is unlocked)
4) fastboot erase recovery
5) fastboot flash recovery <recovery.img>
(recovery.img should be a downloaded custom recovery file - CWM or TWRP, your choice).
6) Reboot into recovery
7) adb push <superuser.zip> /sdcard/superuser.zip
(superuser.zip should be whatever recovery flashable 'root' zip you want to use).
8) Using recovery, flash the zip file.
9) Reboot
10) Done.
Click to expand...
Click to collapse
I agree with you, the problem of the tool kits, I experimented two of then
M, is that you are lost when something don't work, I lost hours and hours before understand it and do it by myself for 50 per cent .
Now that everything is good, I am very prudent with theses helpers,:good:
Hello,
I tried to flash my nexus 7 with a new Paranoid android rom, but i forgot to update TWRP with the latest version and when i flash my rom i had a Failed message... :crying:
Now I can only go into BootLoader and Recovery, but i don't know how to restore the stock ROM....
Is my nexus 7 totally bricked or is there a solution to restore it ?
Thank you, and happy new year !
There is. Enter bootloader mode. Download the nexus 7 toolkit from: nexus7.wonderhowto.com/how-to/definitive-guide-restore-your-nexus-7-tablet-even-if-youve-bricked-it-0145541/
Sent from my LG-D802 using Tapatalk
Hey Guy's i have the same problem but my device does not show up on my PC (running windows 8.1) as a drive, but does appear under device manager as an ADB device entitled 'full',
Any advice how i can add a new rom to my device with this scenario ?
Judgie351 said:
Hey Guy's i have the same problem but my device does not show up on my PC (running windows 8.1) as a drive, but does appear under device manager as an ADB device entitled 'full',
Any advice how i can add a new rom to my device with this scenario ?
Click to expand...
Click to collapse
Hi, Judgie351...
It depends on what you mean by "add a new rom...".
If, as I suspect, you mean to flash a custom ROM, then that's done via a Custom Recovery such as CWM or TWRP... which first needs to be fastboot flashed.
The procedure is relatively straightforward...
-----------------------------------------------------
1). Unlock the bootloader (if it isn't already unlocked) with fastboot oem unlock. This, however, has the unpleasant side effect of completely wiping the device; it essentially performs a factory reset.
2). Fastboot flash a Custom Recovery (CWM or TWRP) with fastboot flash recovery custom_recovery.img
3) . Using Chrome (or any other Android browser), download the Custom ROM .zip of your choice, directly to the Nexus 7.
4). Via the bootloader, boot into your recently fastboot flashed Custom Recovery... navigate to where the Custom ROM .zip downloaded to (usually the /download folder)... and flash it. (After, of course, wiping everything other than internal storage.)
-----------------------------------------------------
As you can see, there is no requirement for ADB when flashing a Custom ROM ... just fastboot... and that only for unlocking the bootloader and flashing a Custom Recovery.
Once both are accomplished, ROM flashes can be handled directly from the Nexus 7 itself... without recourse to a PC... or ADB.
And when you are rooted, you can even flash new Custom Recoveries or Boot images, using the rather excellent Flashify app, without going anywhere near a PC/Mac...or ADB.
Rgrds,
Ged.
GedBlake said:
Hi, Judgie351...
It depends on what you mean by "add a new rom...".
If, as I suspect, you mean to flash a custom ROM, then that's done via a Custom Recovery such as CWM or TWRP... which first needs to be fastboot flashed.
The procedure is relatively straightforward...
-----------------------------------------------------
1). Unlock the bootloader (if it isn't already unlocked) with fastboot oem unlock. This, however, has the unpleasant side effect of completely wiping the device; it essentially performs a factory reset.
2). Fastboot flash a Custom Recovery (CWM or TWRP) with fastboot flash recovery custom_recovery.img
3) . Using Chrome (or any other Android browser), download the Custom ROM .zip of your choice, directly to the Nexus 7.
4). Via the bootloader, boot into your recently fastboot flashed Custom Recovery... navigate to where the Custom ROM .zip downloaded to (usually the /download folder)... and flash it. (After, of course, wiping everything other than internal storage.)
-----------------------------------------------------
As you can see, there is no requirement for ADB when flashing a Custom ROM ... just fastboot... and that only for unlocking the bootloader and flashing a Custom Recovery.
Once both are accomplished, ROM flashes can be handled directly from the Nexus 7 itself... without recourse to a PC... or ADB.
And when you are rooted, you can even flash new Custom Recoveries or Boot images, using the rather excellent Flashify app, without going anywhere near a PC/Mac...or ADB.
Rgrds,
Ged.
Click to expand...
Click to collapse
Worked a treat - Thankyou :good:
Worked for me too !
Thank you guys for your help !!
Hello,
I'm pretty new to rooting Sony devices and I can't seem to install custom roms on my Xperia Z2 using fastboot. My bootloader is unlocked (i've checked several times), USB debugging is checked and it believe my drivers are properly installed (fastboot devices cmd recognizes my device) but when i try to run "fastboot flash zip rom.zip" i get this annoying FAILED (remote: Command not allowed) message. I've looked through several threads but I can find any solution that applies to my case.
Any ideas would be welcome.
Thanks
I called Sony. Their official story is they do not support unlocking their own phones.
I asked her why, she said we just dont support unlocking the bootloader on some phones.
Im going to go break this phone and never recommend or buy sony products ever again
What exactly are you trying to flash?
Fastboot doesn't flash .zip files (I think). Whatever you are trying to flash must be extracted from the .zip file, then flashed via fastboot.
If you are trying to flash a custom kernel, you must have the boot.img file extracted from the .zip file in the same folder as the adb_fastboot folder, then hold in Shift then right-click and select, 'Open command window here' then type in cmd, 'fastboot flash boot boot.img'.
Once it says, 'Waiting for device', hold in the volume-up button on the phone and insert the USB cable into the phone.
Hope this helps.
I'm trying to flash android lollipop. I've tried extracting the boot.img flash it and then try to boot on recovery. A few times nothing happened and I couldn't force restore even using adb. Other times I just got stuck on the splash screen or in a loop reboot.
From what I've found online you can flash with flashboot using "flashboot flash zip Rom.zip" it starts transferring the room but it immediately does to the failed remote command not allowed error.
Sent from my D6503 using XDA Free mobile app
Where did you find that this command works for Xperia devices? I don't say that it can't work, but I see it for the first time (reading XDA for several years). All ROMs which I flashed were via flashtool or recovery, never through fastboot.
The best solution is to follow installation instruction of the given ROM.
RoamenCota
As far as I know most brands don't really support development but have you tried this the Sony Boot loader unlocking website?
_mysiak_
As for the cmd I found it online but I think it was an HTC forum. I guess it might not work in Xperia devices. I'm able to flash with flashtool but so far I've only managed to brick the phone.
Sent from my D6503 using XDA Free mobile app
Which ROM exactly are you trying to flash and what steps have you done?
_mysiak_ said:
Which ROM exactly are you trying to flash and what steps have you done?
Click to expand...
Click to collapse
I've tried flashing the [ROM][WIP]AOSP 5.0 Beta v2.0 from krabappel and the [ROM][SIRIUS][LP][5.0.1][SM-4.9] CyanogenMod 12 Unofficial [NIGHTLY BUILDS] from infected_ (sorry i'm not allowed to post links). As for the first one the process seems a bit more complex since there is a v2 plus an OTA to install. I've tried the second one first with flashboot but it didn't really work. With flash tool i've ended up bricking the phone.
CM is usually flashed via recovery (CWM, TWRP,..) - download ZIP, put it on SD card, boot into recovery, flash from there, reboot. Flashtool or fastboot should not be required. I would advise you to continue in ROM specific topics about any special installation steps/instructions.
_mysiak_ said:
CM is usually flashed via recovery (CWM, TWRP,..) - download ZIP, put it on SD card, boot into recovery, flash from there, reboot. Flashtool or fastboot should not be required. I would advise you to continue in ROM specific topics about any special installation steps/instructions.
Click to expand...
Click to collapse
For some reason that rom isn't able to be installed in TWRP recover. There's some install error may due to the fact that's a beta and not completely stable. If it doesn't work i'll just wait for a more stable version.
Just curious, even if it's a zip file, if I extract the complete package to the fastboot/adb folder and run "fastboot flash boot boot.img" there's no reason not to work right?
amrcardoso said:
For some reason that rom isn't able to be installed in TWRP recover. There's some install error may due to the fact that's a beta and not completely stable. If it doesn't work i'll just wait for a more stable version.
Just curious, even if it's a zip file, if I extract the complete package to the fastboot/adb folder and run "fastboot flash boot boot.img" there's no reason not to work right?
Click to expand...
Click to collapse
I don't think that it's worth the effort to flash those ROMs, unless you are really curious. Otherwise you should stick to verified and fully working ROMs.
It depends what you expect from that command. It will work, but it'll flash only kernel. System and other partitions remain untouched. Most probably you'll get bootloop with such combination.
_mysiak_ said:
I don't think that it's worth the effort to flash those ROMs, unless you are really curious. Otherwise you should stick to verified and fully working ROMs.
It depends what you expect from that command. It will work, but it'll flash only kernel. System and other partitions remain untouched. Most probably you'll get bootloop with such combination.
Click to expand...
Click to collapse
I'll probably stick with the zip flashing via recovery. But what step am I missing to flash a rom thorugh fastboot?
That most probably it's not possible to flash ROM via fastboot on Xperia devices. You have to use flashtool for FTF files and recovery for custom ROMs. Fastboot is used to flash kernel only.
_mysiak_ said:
That most probably it's not possible to flash ROM via fastboot on Xperia devices. You have to use flashtool for FTF files and recovery for custom ROMs. Fastboot is used to flash kernel only.
Click to expand...
Click to collapse
I have been able to flash the stock FTF but never a ROM using flashtool. Maybe that's why.
Thanks
My mother's phone has an audio recording that needs to be recovered before a court date, but the digitizer is broken and the screen is locked. ROM is stock, recovery is stock, bootloader is locked, usb debugging is disabled. I know how to crack passwords / pins on android with a variety of methods, but most require an adb shell or an exploit on an older android version. The few that don't happen through update.zip or the JTAG interface. I can access fastboot and adb sideload. So, I'm thinking maybe I can apply an OTA update that disables the screen lock and/or enables USB debugging. However, since the recovery is stock, the zip package needs to be signed and my attempts keep giving "footer is wrong" or "whole file verification error". It seems to be running Android 5.0.1 because that OTA update will work (but I cannot modify it). The CWM update.zip will not work either (because of verification issues). What are my options here?
If you want to flash a zip file, first download .img file of CWM or TWRP. Boot in fastboot mode, flash the img file using:
fastboot flash recovery recovery.img
Now with CWM or TWRP you can install unsigned zips as well. I think TWRP again requires touch screen so go with CWM recovery.
The bootloader is locked, so this isn't possible. You can flash recovery after unlocking it work fastboot oem unlock, but that will erase data.
YotaPhone 2 ROOT with modified stock recovery
NOTE:
Check out the more functional TWRP recovery for YotaPhone 2.
Since not much dev work is happening on the YotaPhone 2, I though I'd kick off by publishing a recovery image that will hopefully allow you to root your YotaPhone 2 device with lollipop, and e.g. make partition backups.
First off: Disclaimer!
I am not responsible for damaged or bricked devices. If you follow instructions in this post, then YOU are making the choice to tinker with your device, and you are likely to void your warranty by doing so. You might even damage or brick your device, so ask yourself if the benefits outweigh the risks, because after proceeding you are pretty much on your own.
What is it?
It's a slightly modified stock recovery that allows to install packages signed with testkeys, plus adb root access and busybox for e.g. shell. That's it.
What can you do with it?
- adb root & shell access (e.g. to manually backup partitions or modify system files)
- install update zips signed with testkeys (e.g. SuperSU) in addition to original Yota Devices software
- root your device
What can it NOT do?
- probably can NOT install unsigned zips (must be signed by YD (like fota update zips), OR signed with standard testkeys)
- no fancy features, just boring AOSP stock recovery as included in stock firmware
- installing of apks/zips only through adb sideload, not from (emulated) SD card
What do you need?
- YotaPhone 2 (YD201) with Lollipop 5.0, I used firmware 1.39 YMMV with other versions
- Some technical confidence
- USB cable with a PC or laptop on one end
Steps overview:
1) First read the whole post to understand what's going to happen
2) backup (sync stuff, copy photos off, use a backup app etc, use search if unsure how to)
3) Unlock the bootloader
4) Install adb and fastboot if not yet installed. (For Windows look e.g. here, for linux the fastest is probably to install Android SDK with platform tools, see here If this is not enough info to get you started, please use xda search!)
5) Download recovery image: yd201_reco_139_testkeys_v01.img
6) boot the recovery image
7) root the device by sideloading SuperSU,
Unlocking bootloader:
Warning 1: It is currently not known how to re-lock the bootloader. (fastboot oem lock just hangs). This means you cannot completely undo the next step as of yet. This might have consequences for sending the device in for repairs, if they check for this, and deem it a (warranty) problem.
Warning 2: on some devices unlocking the bootloader wipes the device clean to factory defaults. I didn't see this happening on my YD201, but be warned, backup first!
On Linux:
Code:
sdk/platform-tools$ sudo ./fastboot oem unlock
...
OKAY [ 0.002s]
finished. total time: 0.002s
On Windows:
Code:
C:\android-sdk-windows\platform-tools>fastboot oem unlock
...
OKAY [ 0.002s]
finished. total time: 0.002s
Maybe Windows will install some extra drivers in the process.
BOOT the recovery image:
a) First: put the device in fastboot/download mode:
method 1: Power off with USB cable disconnected, then hold volume down key while inserting USB cable (which should already be in your PC on the other end).
method 2: do a
Code:
adb reboot bootloader
You should see a black screen with a tiny white: downloading...
b) boot the recovery image:
On linux:
Code:
sdk/platform-tools$ sudo ./fastboot devices
Should show a connected device in fastboot mode, then proceed:
Code:
sdk/platform-tools$ sudo ./fastboot boot <path>/<to>/yd201_reco_139_testkeys_v01.img
Where <path>/<to>/yd201_reco_139_testkeys_v01.img is the path you downloaded the image file to (e.g. ~/Download/yd201_reco_139_testkeys_v01.img)
On Windows:
copy the yd201_reco_139_testkeys_v01.img file to the folder with fastboot.exe (here assuming C:\android-sdk-windows\platform-tools, and D:\downloads as download location for the img)
* snippet below is fabricated, but you get the idea
Code:
D:\>C:
C:\>cd C:\android-sdk-windows\platform-tools
C:\android-sdk-windows\platform-tools>fastboot.exe devices
Should show a connected device in fastboot mode, then proceed:
Code:
C:\android-sdk-windows\platform-tools>copy D:\downloads\yd201_reco_139_testkeys_v01.img . [i]note the dot at the end[/i
C:\android-sdk-windows\platform-tools>fastboot.exe boot yd201_reco_139_testkeys_v01.img
Hopefully you see the screen go completely black after a few seconds, and recovery menu will appear. Like stock recovery, it will show an error (E:Cannot load volume /misc) but you can ignore that, along with the 'error' triangle icon that goes with it.
If booting fails with a signature error, the bootloader is probably not properly unlocked, try again.
Note that this recovery image could be flashed too (I haven't actually tried to flash yet), but if you're cautious (as we are in this post) you can just boot it every time you need it.
SuperSU flashing:
1) download Chainfire's SuperSU flashable zip from this page, filename is:UPDATE-SuperSU-v2.46.zip
2) Assuming you're still in custom recovery, otherwise boot into custom recovery again as outlined above
3) choose "apply update from ADB" from the menu (choose with volume up/down keys, confirm with power key). Recovery now waits for a file.
4) on the connected PC:
on Linux:
Code:
sdk/platform-tools$ adb sideload <path>/<to>/UPDATE-SuperSU-v2.46.zip
on Windows:
Code:
D:\>C:
C:\>cd C:\android-sdk-windows\platform-tools
C:\android-sdk-windows\platform-tools>copy D:\downloads\UPDATE-SuperSU-v2.46.zip .
C:\android-sdk-windows\platform-tools>adb.exe sideload UPDATE-SuperSU-v2.46.zip
5) on the phone you should see SuperSU installing.
6) reboot when done
7) if SuperSU app is not visible in launcher, download & install SuperSU from playstore.
To verify if rooting worked, start SuperSU. If that looks OK, start an app that requires root (like e.g. betterbatterystats) or use a simple checkroot app from the store. Reboot and check again if it persisted.
NOTE: you could also FLASH this image, replacing the stock recovery on the recovery partition permanently (until you flash again). Above we're just BOOTing it once, next time entering recovery in the standard way will just load the stock recovery from the recovery partition). You would use fastboot flash instead of fastboot boot above. Flashing is UNTESTED.
Problems & FAQ
Q: It doesn't work!!1!
A: Please provide plenty of detail about error messages, which step, what versions etc. Without providing any detail you'll look silly.
Q: I don't know how to <backup/adb/download/reboot/flash>
A: Please use the search button, xda forums have lots of info
Q: How can I tell if I'm in stock recovery or modded stock recovery? They look the same!
A: The Droid error icon with the triangle in the centre of the modded recovery screen has some white text (yd201_cr0.1), the stock one doesn't.
Future development
I hope that there are some devs out there willing to work on the YotaPhone 2 in the near future. I'll try to tinker a bit every now and then, but I cannot promise anything as I'm no expert. To enable proper development of custom ROMs and better recoveries (e.g. TWRP) it would be great if Yota Devices released their Kernel sourcecode for the kernel they use in their YotaPhone 2 ROMs. I know they have been asked to release sources before (and they should in order to comply with the GPL license), but so far without response.
Good news is that You Can Help! Please stimulate Yota to publish Kernel sourcecode for YotaPhone 2 through their support page (hint: choose 'sales' as category, otherwise you'll have to enter lots of details. Be polite!).
Info::
Mod by: SteadyQuad
Version: 0.1 based on YD stock recovery 5.0 1.39 EU
Thanks to: Yota Devices for a great device, Jeopardy for testing and suggestions, Chainfire for SuperSU
Created: 2015-06-10
Last Updated: 2015-06-20 (added warning about current inability to re-lock bootloader)
As SteadyQuad already mentioned, I can confirm that this method works.
Bye bye Google Newsstand! Goodbye Google Books!
(When uninstalling system apps Lollipop handles a bit differently from Kitkat, and I had to always restart the device after deleting.)
Thank you very much for your effort SteadyQuad.
Allelujah!
Thanks SteadyQuad for this great job! It works like a charm!
:good:
Anybody tried to install xposed module on rooted Yotaphone2? (alpha 4 modules)?
I think it little bit risky that's why I'm asking...
Or maybe somebody know how to make a full backup Yotaphone (like in CWM)?
Thanks in advance again for a really great job!
zencooler said:
Allelujah!
Thanks SteadyQuad for this great job! It works like a charm!
:good:
Anybody tried to install xposed module on rooted Yotaphone2? (alpha 4 modules)?
I think it little bit risky that's why I'm asking...
Or maybe somebody know how to make a full backup Yotaphone (like in CWM)?
Thanks in advance again for a really great job!
Click to expand...
Click to collapse
I haven't tried testing xposed yet, but am planning to sooner or later.
Running that custom recovery we do have root level access to everything, so it should be possible to create a backup from there with the help of a computer. Have to look into this.
the recovery download doesn't work.
EDIT : it worked on laptop
How about somebody can compile a TWRP recovery because Yotaphone has posted there SDK ?
So we can make Nandroid backup.
a question : if you can modify stock recovery,
can't you compile from TWRP source and yotaphone SDK a TWRP recovery for the yotaphone 2 users ?
just my 2 cents, i evenly willing to pay for it
Gojira-r32 said:
a question : if you can modify stock recovery,
can't you compile from TWRP source and yotaphone SDK a TWRP recovery for the yotaphone 2 users ?
just my 2 cents, i evenly willing to pay for it
Click to expand...
Click to collapse
I think if we all contribute to twrp and request them they might make us one
Sent from my YD201 using Tapatalk
Can the bootloader be re locked And can the root be removed for warranty purposes
Sent from my YD201 using Tapatalk
Yes
Fastboot oem lock
Gojira-r32 said:
Yes
Fastboot oem lock
Click to expand...
Click to collapse
If the recovery image is modified don't we flash back to stock before oem lock
Sent from my YD201 using Tapatalk
Good work. A pity Xposed framework isn't compatible yet.
Sent from my YD201 using XDA Free mobile app
dai75 said:
Good work. A pity Xposed framework isn't compatible yet.
Sent from my YD201 using XDA Free mobile app
Click to expand...
Click to collapse
Xposed framework isn't FULLY compatible, but many features already work. See SteadyQuad's thread here
adamo86 said:
Can the bootloader be re locked And can the root be removed for warranty purposes
Sent from my YD201 using Tapatalk
Click to expand...
Click to collapse
I haven't been able to re-lock it when I last tried (fastboot oem lock just hung). If anyone did succeed to lock, let us know! (Gojira-r32: did you actually execute the fastboot oem lock?)
I also failed to lock it back . I wanted to install the new update 1.44 that arrive in France but it failed at the recovery stage. E:Error in cache/update/yota....zip (status 7)
I did a wipe cache partition but not a wipe data as I don't want to lose all my settings. Anyone achieved to install the new Yota update version? And then root?
I just updated to latest update in UK. But I tried Kingo no success still.
Sent from my YD201 using Tapatalk
and the first post with flashing S%U tru modified recovery ?
is this firmware somewhere to download?
still not yet on yota FTP
Has anyone the stock recovery image? Maybe I'll achieve to get the OTA update after unrooting my YD201 with the original stock recovery firmware.
i am doing that right now, unroot, flash stock recovery, i have the OTA 1.1.44 pulled out of phone after download and will try to flash it
stock recovery, boot, sustem img, unrooted, everything tried
also got other build, fixed that.
now yotaphone is completly stock and get :
error in update zip "status 7"
so i think this update is no good, some faults in it, that's why we can't flash it yet, also chaged some things in OTA and resigned it etc... no good
Gojira-r32 said:
stock recovery, boot, sustem img, unrooted, everything tried
also got other build, fixed that.
now yotaphone is completly stock and get :
error in update zip "status 7"
so i think this update is no good, some faults in it, that's why we can't flash it yet, also chaged some things in OTA and resigned it etc... no good
Click to expand...
Click to collapse
Did you try to flash the OTA update via adb sideload in the modified recovery? I'm having the same problem.
Edit: I just tried to flash the update via adb sideload - no joy. I got the following error:
Package expects build fingerprint of YotaPhone/yotaphone2/yotaphone2:5.0/LRX21M/5.0.0-EU1.1.39:user/release-keys or Yotaphone/yotaphone2/yotaphone2:5.0/LRX21M/5.0.0-EU1.1.44:user/release-keys; this device has Yotaphone/yotaphone2/yotaphone:5.0/LRX21M/5.0
E:Error in /sideload/package.zip
(Status 7)
I also tried resigning the package with testkeys, but that didn't work either. Same error. So something has changed in the rooting process, because some people in the forum have managed to update normally, presumably on their nonrooted devices.