Related
hey anything please i wiped everything and installed zip"rom" from sd and installed secussful and then i clicked reboot and it just stays on the motorola screen with unlocked in the corner and is stuck there what am i not doing or doing wrong its rooted and unlocked
INSTALL BACKUP!
Or 1. Try pull battery. Or 2. Install again. Or 3. Fastboot.
Atrix - "CM7"
clod007 said:
INSTALL BACKUP!
Or 1. Try pull battery. Or 2. Install again. Or 3. Fastboot.
Atrix - "CM7"
Click to expand...
Click to collapse
i made a back up with titanium and android recovery....
i pulled the battery installed it 2 or 3 times and same thing
what exactly do i type in my cmd prompt on fastboot
If you have a copy of the old ROM, why not reinstall?
For fastboot, sorry, but looking for a tutorial.
Atrix - "CM7"
clod007 said:
If you have a copy of the old ROM, why not reinstall?
For fastboot, sorry, but looking for a tutorial.
Atrix - "CM7"
Click to expand...
Click to collapse
i dont know how to reinstall it but i made back ups of everything
Enter in Android recovery mod
Backup
Chose restore
Atrix - "CM7"
Sometimes certain roms do not properly either clean up the cache and dalvik-cache before and\or after installation which can cause that exact issue. It boots to the Dual-Core screen without doing anything else or restarting after some random amount of time. Hook up fastboot, connect to the device
in command prompt, type this
first confirm that fastboot can communicate between the phone and the pc by using this command below which should show a device connected and list it's serial number
fastboot devices
#--if fastboot sees your phone then just simply type
fastboot -w
#--that wipes the partitions that can cause you to get stuck at the initial boot screen logo, after it finishes, just type
fastboot reboot
I've gotta out of a few situations where phone wouldnt boot until I either did this "fastboot -w" or in clockworkmod recovery, cleared the data and cache, hope that helps, try this method before jumping to any extreme solutions that could make the phone a hat weight
android-DEP said:
Sometimes certain roms do not properly either clean up the cache and dalvik-cache before and\or after installation which can cause that exact issue. It boots to the Dual-Core screen without doing anything else or restarting after some random amount of time. Hook up fastboot, connect to the device
in command prompt, type this
first confirm that fastboot can communicate between the phone and the pc by using this command below which should show a device connected and list it's serial number
fastboot devices
#--if fastboot sees your phone then just simply type
fastboot -w
#--that wipes the partitions that can cause you to get stuck at the initial boot screen logo, after it finishes, just type
fastboot reboot
I've gotta out of a few situations where phone wouldnt boot until I either did this "fastboot -w" or in clockworkmod recovery, cleared the data and cache, hope that helps, try this method before jumping to any extreme solutions that could make the phone a hat weight
Click to expand...
Click to collapse
ok it rebooted and went off the screen now its in a boot loop and flashes the motorola sign then shuts down and keeps going
ok, so the issue was partly the cache not being wiped prior the rom being installed and something went wrong with the installation of the kernel. That happens if the boot.img didnt properly extract and write to partition or its just incompatible with the rom\device.
Visit faux123's thread with kernels for ATT froyo, GB, CM7 & CM9
download the kernel that's compatible for your rom(froyo, gb, cm7 or cm9). Once you download the zip, go in there and pull out the "boot.img" file and put it into the same folder you have fastboot.exe in and boot into fastboot again.
quickly check connectivity with "fastboot devices" to verify and if that checks out, use this command.
"fastboot flash boot boot.img"
it takes like 3 seconds or something to complete so its an easy fix, after its done just do the "fastboot reboot" command.
i had this same exact issue last week plus my recovery was being erased along with this problem so i keep boot.img & recovery.img just sitting inside the fastboot folder just in case
atrix reboot project - it has every single file thats for the atrix and copies of systems, roms, tools, recovery files, mods, tweaks
Try this:
Pull battery
Replace battery while holding volume down until you see fastboot
Tap volume down to until you see android recovery, then press volume up to enter recovery
First try wiping cache/dalvik, if that doesn't work restore nandroid backup, if that doesn't work reflash rom
So I was following all the steps from this thread: http://forum.xda-developers.com/showthread.php?t=2010312
and I did flash the stock 4.2 img. Now, after unlocking the boot loader, i didnt exit the fastboot mode and stayed in. And continued the steps of section D (all of it). Then I did a fastboot reboot , and Google appeared and below it unlocked lock and then the jellybean logo. It's been almost 20 min and it hasn't passed that screen yet. The rainbow colour X.
What do I do to fix this?? I can go back to fastboot mode, but not sure what to do. I did the fastboot erase cache before rebooting my phone!
Look at the notes of section D.
You have to reboot into recovery, clear cache and factory reset.
Sent from my Nexus 4
El Daddy said:
Look at the notes of section D.
You have to reboot into recovery, clear cache and factory reset.
Sent from my Nexus 4
Click to expand...
Click to collapse
I did this though: 13) Erase the cache partition: fastboot erase cache
14) Reboot: fastboot reboot
Okay, and I will try to do that now.
El Daddy said:
Look at the notes of section D.
You have to reboot into recovery, clear cache and factory reset.
Sent from my Nexus 4
Click to expand...
Click to collapse
I booted myself into recovery via fastboot and it shows android laying down with a red triangle and inside that its " ! "
What now?
Press volume up and power at the same time. It will open the menu.
Sent from my Nexus 4
LimitsX said:
I booted myself into recovery via fastboot and it shows android laying down with a red triangle and inside that its " ! "
What now?
Click to expand...
Click to collapse
Flash it again using fastboot and the official Google image. Recent nexus devices are strange, i never had problems before but softbricked both nex4 and 7 just like that. If you can enter fastboot mode all is well though.
Ps. That tutorial, that was the longest one I've seen in my life. Are you aware that Google images contain clickme.bat files? You literally click it and it's done. Just make sure you have fastboot and adb installed. You can extract them from nexus toolkit as well.
If you do wanna make it by hand, also no problem. Download the image from here:https://developers.google.com/android/nexus/images
And type:
fastboot flash bootloader bootloader-maguro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-maguro-i9250xxkk6.img
fastboot reboot-bootloader
fastboot -w update image-yakju-icl53f.zip
Exchange the correct names of course. And make sure you're in fast boot mode.
El Daddy said:
Press volume up and power at the same time. It will open the menu.
Sent from my Nexus 4
Click to expand...
Click to collapse
Do I do that on that screen? I did, and it went into completely black screen.
molesarecoming said:
Ps. That tutorial, that was the longest one I've seen in my life. Are you aware that Google images contain clickme.bat files? You literally click it and it's done. Just make sure you have fastboot and adb installed. You can extract them from nexus toolkit as well.
If you do wanna make it by hand, also no problem. Download the image from here:https://developers.google.com/android/nexus/images
And type:
fastboot flash bootloader bootloader-maguro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-maguro-i9250xxkk6.img
fastboot reboot-bootloader
fastboot -w update image-yakju-icl53f.zip
Exchange the correct names of course. And make sure you're in fast boot mode.
Click to expand...
Click to collapse
Okay, im gonna go and do that! Thanks!
I was trying to mount the sdcard with nexus 4 but it wont do that with CWM and TWRP.
okay I think I just lost access to everything on my phone :|. I am still on TWRP, is there anything I can do with that?
I accidentally wiped the system files ugh. So I lost bootloader which means my phone is empty and useless and im still active on TWRP.
This is what I did in TWRP:
went to WIPE menu and did the following:
1)Wipe Cache
2)Dalvik Cache
3)Factory Reset
4)Wipe System
5)Wipe External storage ( didn't work - failed)
6)Wipe Internal storage (deleted)
So I have a boot loader still ?? or is that gone too? I am still active in TWRP. What are my options to fix this mess I've gotten myself into =\.
molesarecoming said:
Ps. That tutorial, that was the longest one I've seen in my life. Are you aware that Google images contain clickme.bat files? You literally click it and it's done. Just make sure you have fastboot and adb installed. You can extract them from nexus toolkit as well.
If you do wanna make it by hand, also no problem. Download the image from here:https://developers.google.com/android/nexus/images
And type:
fastboot flash bootloader bootloader-maguro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-maguro-i9250xxkk6.img
fastboot reboot-bootloader
fastboot -w update image-yakju-icl53f.zip
Exchange the correct names of course. And make sure you're in fast boot mode.
Click to expand...
Click to collapse
Yeah the thread is verbose, but its more of a tutorial than a "fix my fone nao!!!" Thread.
Efrant wrote it like that so users understand what they are doing.
Sent from my Nexus 4
so basically I have a dead phone?! =\. Anyone..help or point me in the right direction?
Nevermind. I figured it out and fixed it :victory: !!
El Daddy said:
Yeah the thread is verbose, but its more of a tutorial than a "fix my fone nao!!!" Thread.
Efrant wrote it like that so users understand what they are doing.
Sent from my Nexus 4
Click to expand...
Click to collapse
sure, didnt want to apply its not good or anything. its nice to know that google gives you some sort of emergency option, i've used it countless of times.
LimitsX said:
okay I think I just lost access to everything on my phone :|. I am still on TWRP, is there anything I can do with that?
I accidentally wiped the system files ugh. So I lost bootloader which means my phone is empty and useless and im still active on TWRP.
This is what I did in TWRP:
went to WIPE menu and did the following:
1)Wipe Cache
2)Dalvik Cache
3)Factory Reset
4)Wipe System
5)Wipe External storage ( didn't work - failed)
6)Wipe Internal storage (deleted)
So I have a boot loader still ?? or is that gone too? I am still active in TWRP. What are my options to fix this mess I've gotten myself into =\.
Click to expand...
Click to collapse
for the next time, you better learn what all this stuff is and means which you are flashing. i cant help but thinking its dangerous what you're doing there. if you are in twrp you're free to install any rom, your phone is pretty much safe if you can access it. wiping system wont kill your bootloader, system is a partition, your rom gets installed in there. you can wipe it, most roms even do it by default in the installation script. if your bootloader is gone you'll know.
HOW TO ROOT YOUR DEVICE WITHOUT FLASHING RECOVERY
This can be done with two methods.
ADB or FASTBOOT.
I have tested both methods and they worked for me.
I tested this on JSS15J. I am not sure about any other versions but I guess it should work.
SOME BASIC INFORMATION
Usually when you want to root your device, you must have UNLOCKED BOOTLOADER.
A CUSTOM RECOVERY is usually used to flash SuperSU to gain root access.
CUSTOM RECOVERIES ARE USUALLY FLASHED (they permanently replace your stock recovery)
In this guide, You BOOT into custom recovery by going into BOOTLOADER and then using fastboot/adb tools to flash SuperSU .
Booting is temporary and thus once you restart from recovery, the custom recovery will be gone
Make sure, you have USB debugging mode enabled. To go into bootloader you can either use adb commands ( Type [adb reboot bootloader] in cmd in platform tools directory with your device connected) or do it manually by turning it off and then holding power and volume down.
You must also have platform tools of SDK (Fastboot and ADB) for this to work. MAKE SURE YOU OPEN CMD into the folder where platform tools are present.
Try it on OWN risk. I will not be responsible for bricked devices or any damage.
ADB METHOD
Connect to your PC and make sure USB debugging is on.
COMMANDS IN BRACKETS. DON'T WRITE THEM. COMMAND WOULD BE LIKE : fastboot boot recovery.img
MAKE SURE YOUR DEVICE HAS UNLOCKED BOOTLOADER
(fastboot boot [recovery.img])--------------------- Name of recovery to be here
Mount /system and push the necessary files once the recovery has started:
(adb push su /system/xbin)
(adb push Superuser.apk /system/app)
Set correct permissions:
(adb shell)------------------------------ You have got into your device's shell
(chmod 06755 /system/xbin/su)
(chmod 0644 /system/app/SuperSU.apk)
(exit)
Reboot:
(adb reboot)
FASTBOOT METHOD
This is relatively easier as you will boot into custom recovery temporarily and then flash ZIP of SuperSU. Afterwards I recommend to clear davik cache and restart.
UNLOCKED BOOTLOADER REQUIRED
Boot into bootloader.
Type these commands to boot into custom recovery. This will not flash recovery and you will have stock recovery once you restart.
fastboot boot recovery recovery.img where recovery.img will be the file name of recovery
(After 4.4, use this command "fastboot boot recovery.img" instead of above mentioned)
After booting into reccovery, flash SuperSU and you are done.
I recommend clearing dalvik cache before leaving and restart.
And you are done.
YOU CAN ALSO USE A PREROOTED KERNEL WHICH YOU CAN FLASH VIA FASTBOOT. I AM NOT SURE IF THERE IS ANY
For information on how to retain root after OTA, please refer to this :
Update Super SU is also taken from this guide.
http://forum.xda-developers.com/showthread.php?t=2415497
For Recovery/SuperSU/TWRP
http://forum.xda-developers.com/showthread.php?t=2382051
CWM
http://forum.xda-developers.com/showthread.php?t=2381544
PLATFORM TOOLS:
http://www.androidfilehost.com/?fid=9390355257214632011
If you are stuck in a bootloop, make sure you have cleared dalvik cache in custom recovery.
I got bootloop when i tried with fastboot method as I was new to twrp, I explored it a bit and tried to remove system and tried overwriting data to see how it is different from CWM and check its strength. I got an error clearing cache so I rebooted into custom recovery to clear dalvik and my nexus booted fine (DON'T TRY THIS, JUST CLEAR CACHE AND WIPE DATA and restart)
REMEMBER, UNLOCKING BOOTLOADER WILL DELETE ALL YOUR DATA AND DOING WIPES WILL ALSO DELETE ALL YOUR DATA.
DALVIK WON'T DELETE YOUR DATA BUT
MAKE SURE YOU HAVE MADE A BACKUP using BACKUP PRO (non rooted) or Helium (non rooted) and Titanium Backup Pro (Daah, you are not rooted so this won't work)
GOOD LUCK
Booting into custom recovery to install root works fine.
As you mentioned unlocking bootloader is still a prerequisite.
You may want to just use the SuperSU install zip though. Though I haven't tried Superuser on this tablet, it is my understanding it hasn't been modified to work with 4.3 security. That may have changed since I last looked so if you find differently please post. SuperSU added a daemon mode to deal with 4.3 security changes.
sfhub said:
Booting into custom recovery to install root works fine.
As you mentioned unlocking bootloader is still a prerequisite.
You may want to just use the SuperSU install zip though. Though I haven't tried Superuser on this tablet, it is my understanding it hasn't been modified to work with 4.3 security. That may have changed since I last looked so if you find differently please post. SuperSU added a daemon mode to deal with 4.3 security changes.
Click to expand...
Click to collapse
I got bootloop but then realised it might due to trying to wipe system in twrp. Clearing dalvik worked fine .SuperSU used
So you don't replace stock recovery if you boot into a custom recovery using fastboot?
Sent from my Nexus 7 (2013)
Muikkuman said:
So you don't replace stock recovery if you boot into a custom recovery using fastboot?
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
The trick here is to BOOT into custom recovery BUT not FLASH recovery permanently. Once you restart, the CUSTOM recovery will be gone.
You can use simple commands if using Fastboot
fastboot boot recovery [recovery name.img]
This way you will install SuperSU using recovery which is relatively easier than ADB commands.
You will only go into recovery temporarily.
I also read a forum where you can preserver root even after OTA/ Updates.
[UPDATE]
http://forum.xda-developers.com/showthread.php?t=2415497
Do check that out as well.
I tried this with Twrp and superSU.
I got bootloop as I have been always CWM person so I accidently tried to delete system too with dalvik cache and hard reset and I got an error
However, I boot again into recovery and cleared wipes and the bootloop was gone
Hnk1 said:
The trick here is to BOOT into custom recovery BUT not FLASH recovery permanently. Once you restart, the CUSTOM recovery will be gone.
You can use simple commands if using Fastboot
fastboot boot recovery [recovery name.img]
This way you will install SuperSU using recovery which is relatively easier than ADB commands.
This way you will only go into recovery temporarily.
I also read a forum where you can preserver root even after OTA/ Updates.
Do check that out as well.
I tried this with Twrp and superSU.
I got bootloop as I have been always CWM person so I accidently tried to delete system too with dalvik cache and hard reset and I got an error
However, I boot again into recovery and cleared wipes and the bootloop was gone
Click to expand...
Click to collapse
Thanks for your reply I'll make sure to check everything out.
Sent from my Nexus 7 (2013)
Muikkuman said:
Thanks for your reply I'll make sure to check everything out.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
Anytime mate
How do we clear dalvik without a custom recovery?
Master619 said:
How do we clear dalvik without a custom recovery?
Click to expand...
Click to collapse
You restart your device. Boot into bootloader and use fastboot to Boot into custom recovery(command given in post above).Once Into recovery, you can easily clear dalvik cache.
And remember, it might not require clearing cache because I was exploring twrp n overwriting data n tried To delete system to see how powerful the recovery is. I will update guide now
muikkuman said:
so you don't replace stock recovery if you boot into a custom recovery using fastboot?
Sent from my nexus 7 (2013)
Click to expand...
Click to collapse
master619 said:
how do we clear dalvik without a custom recovery?
Click to expand...
Click to collapse
guide updated. Check it.
Platform tools are being attached
The "fastboot boot recovery recovery.img" command is not working anymore. The command prompt returns with a "cannot load recovery" error. At least that's what it does on my Nexus 7 running Android 4.4.2.
This seems to affect Android 4.3 and upwards according to this Nexus 4 thread: http://forum.xda-developers.com/nexus-4/help/solved-fastboot-boot-recovery-img-t2380675
There's a workaround with a different fastboot command line as mentioned in the thread. I wonder if there's also a fix for the Nexus 7. Any replies would be greatly appreciated.
gunner49 said:
The "fastboot boot recovery recovery.img" command is not working anymore. The command prompt returns with a "cannot load recovery" error. At least that's what it does on my Nexus 7 running Android 4.4.2.
This seems to affect Android 4.3 and upwards according to this Nexus 4 thread: http://forum.xda-developers.com/nexus-4/help/solved-fastboot-boot-recovery-img-t2380675
There's a workaround with a different fastboot command line as mentioned in the thread. I wonder if there's also a fix for the Nexus 7. Any replies would be greatly appreciated.
Click to expand...
Click to collapse
Did you try: fastboot boot recovery.img ?
mdamaged said:
Did you try: fastboot boot recovery.img ?
Click to expand...
Click to collapse
That worked a treat! Thanks a lot mate!
Those who finding difficulty in rooting Nexus 7 (2013) can use Wugfresh Nexus Root Toolkit. It is so powerful that you would find every function you would like to do on your Nexus 7, from the comfort of your PC. Also watch qbking77 's video on using the Toolkit for further information.
First of all, I know that there are many people asking same thing. I have checked those threads and I guess I am just a little bit more clueless. Last time I was able to use my Nexus 10 was 3 months ago. Since then I tried to solve it many times, but no luck so far. I will try to explain some of the issues I'm experiencing, but I'm afraid I'm not too good with all the expressions people are using on this forum.
1. ADB vs Fastboot
I see this mentioned often and I don't know what exactly it means. It's amazing to me that I can't google it, I'm usually good with googling. I can see that my N10 is sometimes listed under ADB and sometimes under Fastboot devices but I have no idea what I did to change that. I do know that whatever I try to do at certain point, it's always in "wrong" mode, waiting for adb etc. So if someone can point me to a thorough explanation, a wiki or something, that would be very nice.
2. The Loop
I managed to get ClockworkMod v6.0.4.3 installed and it's this loop that device is now inside. I've tried pretty much all possible combinations, wiped both caches, did factory reset, rebooted to system/bootloader/recovery... nothing. Always ends up on same CM menu.
3. Android Toolkit
I have installed this on my computer and tried so many things that I forgot about all details. I tried flashing the big 400 MB stock image to the device, but haven't been successful (says waiting for ADB, even if the device WAS listed as ADB device before I started the procedure). I am also expecting to see the N10 as another "drive" from my desktop, if you know what I mean, so that I could copy files to it. However I don't see it that way, I only see it registered as a Nexus 10 device, like a mouse or any other non-drive device. Is this normal?
So what to do? Can anyone tell me in a simple way, because I am obviously stupid enough to find threads I've seen so far not clear enough. And I would actually think that my computer literacy level is rather high, I think that this Nexus 10 is the only thing that brought me to my knees in last 20 years of working with computers.
And when I say "simple wiki style" I'm thinking of something like this:
Ok. no links allowed, great. It's a redmondpie article named
/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/
This is easy enough for me... but do I assume correctly that all this has already been done with me installing Android Toolkit? If so, it uses a different path structure and I don't see all those folders...
So u do have cmw installed, when u try to flash a ROM it just boots to recovery?
Sent from my Nexus 10 using Tapatalk
newellj79 said:
So u do have cmw installed, when u try to flash a ROM it just boots to recovery?
Click to expand...
Click to collapse
You mean flashing ROM only with CWM, not through android toolkit? Through CWM menu I have tried (many times):
- wipe data / factory reset
- wipe cache partition
- wipe dalwik cache
I don't see way to do anything with:
- install zip
- backup and restore
- mounts and storage
Rebooting menu items do following:
- Reboot system --> reboots to same CWM recovery menu
- Reboot to bootloader --> reboots to the stock bootloader "menu" where I can choose between Start, Power Off, Recovery mode (picking this will reboot to CWM recovery menu) and Restart bootloader (picking this will reboot to this same menu)
- Reboot recovery --> reboots to same CWM recovery menu
1 adb works only in os and recovery, fastboot works only in bootloader
2 it looks like your recovery is screwed up, flash this with fastboot
http://techerrata.com/file/twrp2/manta/openrecovery-twrp-2.6.3.1-manta.img
fastboot erase recovery
fastboot flash recovery nameofrecovery.img
3try not to use toolkits, you have a nexus, toolkits are more complicated than manual methods and you won't learn anything from it
Once you have recovery
Wipe all, then you will will need to use adb sideload to flash ROM as you have no ROM on emulated sdcard
Go to advanced menu
adb sideload
adb sideload nameofROM.zip
adb sideload gapps.zip
For more info on fastboot
http://forum.xda-developers.com/showthread.php?t=2277112
Sent from my Nexus 7 using XDA Premium 4 mobile app
demkantor said:
1 adb works only in os and recovery, fastboot works only in bootloader
2 it looks like your recovery is screwed up, flash this with fastboot
http://techerrata.com/file/twrp2/manta/openrecovery-twrp-2.6.3.1-manta.img
fastboot erase recovery
fastboot flash recovery nameofrecovery.img
3try not to use toolkits, you have a nexus, toolkits are more complicated than manual methods and you won't learn anything from it
Once you have recovery
Wipe all, then you will will need to use adb sideload to flash ROM as you have no ROM on emulated sdcard
Go to advanced menu
adb sideload
adb sideload nameofROM.zip
adb sideload gapps.zip
For more info on fastboot
http://forum.xda-developers.com/showthread.php?t=2277112
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The first part worked ok. The second part doesn't.
ADB sideload - I went there in the Nexus menu
adb sideload kitkat2501.zip
returns this:
* failed to write data 'protocol fault (no status)' *
If I do it without starting adb sideload on nexus, then it just says "error: closed", so it does recognize the change.
I downloaded the latest sdk tool, 64-bit, and the stock nexus 10 rom from 25th Janaury.
Let's do this, grab the latest stock for manta from here
https://developers.google.com/android/nexus/images
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
And extract and run the flashall.bat
This should bring you to the latest official software/firmware. Then with you up and running we can root and give you custom recovery,ROM,whatever
If you have an issues at all please copy and paste all input/output from cmd/terminal here
Sent from my Nexus 7 using XDA Premium 4 mobile app
demkantor said:
Let's do this, grab the latest stock for manta from here
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
And extract and run the flashall.bat
This should bring you to the latest official software/firmware. Then with you up and running we can root and give you custom recovery,ROM,whatever
If you have an issues at all please copy and paste all input/output from cmd/terminal here
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You are a wizard. I got it all ok now and I added CWM to it, it was easy to root it from there.
I tried to search, but in vain.
Hardware: Nexus 4
Software : Android 4.4.4
For reasons that are not clear to me the machine restarted and is stuck in those 4 rotating circles, and doesnt go beyond it. Tried multiple things such rebooting, rebooting into recovery and booting again, tried adb to see if it can see the machine in recovery mode, but to no avail.
Can someone please help? Thanks in advance.
Did you do anything, flash anything to get the boot loop? Boot loop can usually be cleared by doing a factory reset. But you'll have to reset up your phone afterwards
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Did you do anything, flash anything to get the boot loop? Boot loop can usually be cleared by doing a factory reset. But you'll have to reset up your phone afterwards
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
This is a stock android and have no changes whatsoever except automatic update to 4.4.4. Only thing that is different is it is unlocked.
For last one week the phone kept complaining that it was unable to back up photos and videos. So I kept the wifi on over the night, and next morning I saw what i thought was it was trying to reboot but unable to do.
Is it possible to connect to machine while it is in recovery mode? My ADB can't discover the device either in recovery mode or while it is trying to boot. Is there a way to press some button and hard reset it?
Concoran said:
This is a stock android and have no changes whatsoever except automatic update to 4.4.4. Only thing that is different is it is unlocked.
For last one week the phone kept complaining that it was unable to back up photos and videos. So I kept the wifi on over the night, and next morning I saw what i thought was it was trying to reboot but unable to do.
Is it possible to connect to machine while it is in recovery mode? My ADB can't discover the device either in recovery mode or while it is trying to boot.
Click to expand...
Click to collapse
Can you get into the bootloader? If so you can flash a custom recovery. ADB won't work in the stock recovery.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Can you get into the bootloader? If so you can flash a custom recovery. ADB won't work in the stock recovery.
Click to expand...
Click to collapse
I can get into bootloader - if you mean by pressing down volume button and powering on - so you see a few options such as 'Start', 'Restart Bootloader' et al.'
If I can get into this, what option do I have? How I can I some custom recovery such as TWRP?
Also, I saw a youtube video where a gentleman shows how to completely reset from Recovery mode (hold power button and press up volume key), but that doesn't seem to work for me.
Concoran said:
I can get into bootloader - if you mean by pressing down volume button and powering on - so you see a few options such as 'Start', 'Restart Bootloader' et al.'
If I can get into this, what option do I have? How I can I some custom recovery such as TWRP?
Also, I saw a youtube video where a gentleman shows how to completely reset from Recovery mode (hold power button and press up volume key), but that doesn't seem to work for me.
Click to expand...
Click to collapse
Yes, that's the bootloader. Google 15 second adb install xda and install that. Then download the latest version of this http://techerrata.com/browse/twrp2/mako
Rename it recovery and put it in the same directory as fastboot.exe which will be installed with the 15 second adb install
Open a Windows command prompt in the same directory as fastboot and then with your phone connected to the pc and in the bootloader type the command in the command window
fastboot flash recovery recovery.img
This will instal twrp to your phone
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Yes, that's the bootloader. Google 15 second adb install xda and install that. Then download the latest version of this http://techerrata.com/browse/twrp2/mako
Rename it recovery and put it in the same directory as fastboot.exe which will be installed with the 15 second adb install
Open a Windows command prompt in the same directory as fastboot and then with your phone connected to the pc and in the bootloader type the command in the command window
fastboot flash recovery recovery.img
This will instal twrp to your phone
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
My Biggest concern right now is not TWRP. I need to somehow get the machine to boot. It is stuck in those 4 circling things, and I need to somehow get the OS to work (or re-install if needed).
I am able to get to recovery where I see options to 'apply aupdate from ADB,' 'wipe data' and 'wipe partition'. I have wiped off everything, now I need to somehow get OS to install, and I don't know how. I tried using 'adb sideload 'image-occam-ktu84l.zip', but it fails.That file was extracted from occam-ktu84l-factory-0d3fd624.tgz from Android site.
Update: Great, now TWRP is installed. What next? I don't want CM at this point. Just stock Os. How do I get on to the machine?
Concoran said:
My Biggest concern right now is not TWRP. I need to somehow get the machine to boot. It is stuck in those 4 circling things, and I need to somehow get the OS to work (or re-install if needed).
I am able to get to recovery where I see options to 'apply aupdate from ADB,' 'wipe data' and 'wipe partition'. I have wiped off everything, now I need to somehow get OS to install, and I don't know how. I tried using 'adb sideload 'image-occam-ktu84l.zip', but it fails.That file was extracted from occam-ktu84l-factory-0d3fd624.tgz from Android site.
Update: Great, now TWRP is installed. What next? I don't want CM at this point. Just stock Os. How do I get on to the machine?
Click to expand...
Click to collapse
Adb side load this http://forum.xda-developers.com/showthread.php?p=47476426
Edit, you could also flash the .zip you mentioned in your post by
fastboot update your file.zip
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Adb side load this http://forum.xda-developers.com/showthread.php?p=47476426
Edit, you could also flash the .zip you mentioned in your post by
fastboot update your file.zip
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Now that I have TWRP, how do I install CM? I would eventually like to return to stock, but at least for now, I need to get the phone going.
UpdateOk, the TWRP wasn't functioning well (swipe function wouldn't work), so got CWM recovery, and installed CM. CM too goes into infinite loop. Now I am completely stuck, I have no idea what else I can do.
Concoran said:
Now that I have TWRP, how do I install CM? I would eventually like to return to stock, but at least for now, I need to get the phone going.
UpdateOk, the TWRP wasn't functioning well (swipe function wouldn't work), so got CWM recovery, and installed CM. CM too goes into infinite loop. Now I am completely stuck, I have no idea what else I can do.
Click to expand...
Click to collapse
Flash the factory image in fastboot
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the factory image in fastboot
Click to expand...
Click to collapse
I installed both TWRP and CWM alternatively, installed factory images using flash-all.bat, install CM11. But in both cases, 1. factory image : The system get stuck in boot mode where those 4 circles keep rotating around each other, 2. In CM11, the arrow keep rotating indefinitely.
I don't know what else I can do.
Any pointers? Thanks in advance.
I am beginning to suspect hardware malfunction. In which case, is there a log somehow I can see?
As an Aside: 1. Adb refuses to see the device in fastboot mode. Not sure if this is an expected behavior. Fastboot can.
2. Stock Android USB Drivers never work. I had to get the WugFresh Development drivers.
This is Windows 8 environment.
jd1639 said:
Flash the factory image in fastboot
Click to expand...
Click to collapse
As I said earlier, both factory image and CM go into infinite loop at bootup. I have no idea what else to do.
Question now is to see if something is wrong with hardware. I don't know how to check that. Is there a way to do some diagnostics
Concoran said:
As I said earlier, both factory image and CM go into infinite loop at bootup. I have no idea what else to do.
Question now is to see if something is wrong with hardware. I don't know how to check that. Is there a way to do some diagnostics
Click to expand...
Click to collapse
You probably have a failure of the emmc. What happens if you try to lock the bootloader and then reboot? Does it stay locked?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You probably have a failure of the emmc. What happens if you try to lock the bootloader and then reboot? Does it stay locked?
Click to expand...
Click to collapse
Yes, after locking (fastboot oem lock), bootloader the status says locked and I no longer see that unlocked icon when booting.
- At the moment I have CWM, and I see advanced options to format different folders which I have already done. But what I am not able to do is to use adb to copy the image-occam-ktu84l.zip to sdcard. Only way I have been able to install any zip is using sideload. Is that normal? I wonder if I am following right steps to begin with.
- Also, are there tools that can run and check if emmc has no bad sectors etc?
- In CWM I formatted whole log of folders, and now when CWM boots, it can't find /cache/recovery/* files. Which I take as a good sign - since old stuff is now gone. From here I don't know how to proceed. Any help - very thanful.
Concoran said:
Yes, after locking (fastboot oem lock), bootloader the status says locked and I no longer see that unlocked icon when booting.
- At the moment I have CWM, and I see advanced options to format different folders which I have already done. But what I am not able to do is to use adb to copy the image-occam-ktu84l.zip to sdcard. Only way I have been able to install any zip is using sideload. Is that normal? I wonder if I am following right steps to begin with.
- Also, are there tools that can run and check if emmc has no bad sectors etc?
- In CWM I formatted whole log of folders, and now when CWM boots, it can't find /cache/recovery/* files. Which I take as a good sign - since old stuff is now gone. From here I don't know how to proceed. Any help - very thanful.
Click to expand...
Click to collapse
If you can side load you should be able to adb push a rom. When in recovery type adb devices. Does it show that your device is connected? Do you get an error?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you can side load you should be able to adb push a rom. When in recovery type adb devices. Does it show that your device is connected? Do you get an error?
Click to expand...
Click to collapse
I can sideload from adb. (adb sideload <filename>.zip while CMW is waiting for abd sideload). But can't push since adb doesn't recognize the device while in fastboot - the way fastboot can.
Concoran said:
I can sideload from adb. (adb sideload <filename>.zip while CMW is waiting for abd sideload). But can't push since adb doesn't recognize the device while in fastboot - the way fastboot can.
Click to expand...
Click to collapse
You have to be in recovery to run adb commands. The bootloader is only for fastboot commands. Try pushing while you're in recovery, not the bootloader.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You have to be in recovery to run adb commands. The bootloader is only for fastboot commands. Try pushing while you're in recovery, not the bootloader.
Click to expand...
Click to collapse
Here 's what I see when I to sideload,
In CWM, I choose 'install from zip, which takes me to next page where i chose to select from sideload. I then start sideload from 'adb sideload occam-ktu84l-factory-0d3fd624.tgz' (sometime I use the extracted zip from that tgz),
Following is what I see on CMW,
'Restarting adb
Finding update package...
Opening update package...
E: Can't open /tmp/update.zip
(bad)
installation aborted'
Concoran said:
Here 's what I see when I to sideload,
In CWM, I choose 'install from zip, which takes me to next page where i chose to select from sideload. I then start sideload from 'adb sideload occam-ktu84l-factory-0d3fd624.tgz' (sometime I use the extracted zip from that tgz),
Following is what I see on CMW,
'Restarting adb
Finding update package...
Opening update package...
E: Can't open /tmp/update.zip
(bad)
installation aborted'
Click to expand...
Click to collapse
Ok, you can't use that file (tgz) in cwm, adb or fastboot. What you can do is extract it and then use the zip file. But, you'll have to boot into the bootloader and then use the command
fastboot update update.zip
Sent from my Nexus 5 using XDA Free mobile app