okey so i had cm10version 2.0installed and i wanted stock ICS so i installed step 1 in the internal sd and clodes phone pink screen etc after installed of step1 was completed the phone rebooted showed Huawei logo and loop! it just shows logo and reboots! :/ What can i do ?! I have to sell it tommorow so someone please help me !
update
i have access to pink screen now please help !
iStopper said:
i have access to pink screen now please help !
Click to expand...
Click to collapse
When in pink screen, you will need to connect your phone to your computer. You should see your phone's internal files. Copy all files from a ROM to the correct folders. (I haven't tried this method myself, but it's what I've read on other threads)
Related
Hi, I think this is my first post here. Anyway, here the question:
I have an Ideos X5 (not pro), it is bricked. So far, I have followed instruction for recoveries from several threads, but none of them worked because in my phone:
there is no boot screen
there is no pink screen
there is no logo
there are no images of any kind (screen wont even turn on)
it only vibrates when I plug it into my computer
Also *sometimes* the buttons light up and when this happens windows detect a new USB device, but after I while it dissapears again. Also, this happens only with the battery on.
The phone became bricked after I followed instructions to revert back to froyo from gingerbread (wifi wasn't working). All roms were originals from Huawei.
So, any suggestions??
Thanks in advanced.
I had a problem like you.I have deleted amss.mbn file because Huawei locked pink screen, it was bricked But i wasn't so patience enough, i sent my phone to technical care.But here are the answers, try it with caution:
shuiyunxingzuo said:
Hi
Space is not enough to flash any ROMs;
Bootloader is locked,you could not edit that sector.
So is there a special ROM that is very small and allows to edit the bootloader?
Here is the MINI ROM:
http://www.mediafire.com/?7c33h84a974va28
Flash it than edit the bootloader~
NOTICE: I format the whole sector ,and the file including IMEI was missing
'Cause I don't know how to edit recovery or other system files like .mbn,
so just delete the abnormal big file and you would be able to flash any ROM s
Click to expand...
Click to collapse
xmsnx said:
Yes!!!! My phone works"!!!!!!!
Ok here's what I did
Download mediafire.com/?1hbk6n46hgamyt6
Unzip it, and find UPDATE.APP
Put UPDATE.APP in a dload folder and upload to empty sdcard.
Put sdcard in phone, and hold vol+/- and power and flash it.
After phone has restarted pull battery.
Download http://www.mediafire.com/?6hrfz36b8e2vw87
Unzip and copy the dload folder to empty sdcard.
Hold vol+/- and power and flash it.
After it fails near the end or if it restarts then pull battery.
Download a rooted boot.img and a clockworkmod recovery.img (got both mine from links at modaco)
Attach phone to PC in pink screen mode and delete the boot.img and recover.img files.
Upload the downloaded root.img and recovery.img to image folder in phone.
Download any custom rom from XDA, I used http://forum.xda-developers.com/showthread.php?t=1475687 and upload it to sdcard
Pull battery.
Hold vol+ and power and go into clockworkmod, wipe everything and flash the custom rom!!
Good luck!
Click to expand...
Click to collapse
Tried taking off the battery for 10 seconds and after that inserted USB into computer (without battery)? Also try to take off battery and insert USB to wall-charger.
The buttons lighting up could be our way out, but if it only stays there for a couple of seconds it doesn't help. Can you see what Windows detects?
Hi again,
thanks for answering.
None of your suggestions worked anyway, because it won't even load anything from the sdcard, it just makes a short vibration and nothing more.
I managed to get the lights on again, but windows didn't show what kind of device it was, maybe because it's already installed but I'm not sure which usb device is it (windows did make a sound though, like "device is connected" sound). Also I noticed there's a red led blinking near the speaker, does that mean anything?
Anyway, tried to flash while the lights were up but it did nothing, and after two minutes the went off again.
Thanks again for your suggestions.
I connected the phone to my laptop with ubuntu, and despite I cannot do anything with the phone, there are two devices created in /dev: hiddev0 and hidraw0. Is there a way to flash the device using any of those files?
thanks again.
Worth a try on this post : Here
It is fried then
Try mounting those two devices, is there any file system recognized? It might not be bricked, but this is an issue probably nobody has had yet. Send it in for repair if it is still within warranty.
Important question: How did this even happen?
XphX
XphX said:
Important question: How did this even happen?
Click to expand...
Click to collapse
auxorro said:
The phone became bricked after I followed instructions to revert back to froyo from gingerbread (wifi wasn't working). All roms were originals from Huawei.
Click to expand...
Click to collapse
Sent from my U8800 using Tapatalk 2
Hi,
thanks for all the help.
Sadly nothing works with this phone, I tried mounting and dd from the devices but nothing happens.
I guess I'll send it for repair (hope it's still within warranty)
Anyway, thanks again for all the suggestions.
Bye!!
auxorro said:
Hi,
thanks for all the help.
Sadly nothing works with this phone, I tried mounting and dd from the devices but nothing happens.
I guess I'll send it for repair (hope it's still within warranty)
Anyway, thanks again for all the suggestions.
Bye!!
Click to expand...
Click to collapse
If the phone wasn't rooted, then it is still within warranty
Hi all,
I have a bit of a problem.
I had an old Oxygen (?) 2.3.? but wish to upgrade to ICS so after installing the 'official' 2.3.5 was following steps in http://forum.xda-developers.com/showthread.php?t=1420728.
I got up to the bit about installing Clockworkmod. When I tried to go into recovery mode for some reason (I must have screwed something up) it went back into the Firmware update (presumably because I still had the sd card with the 2.3.5 updated on it). It gets through the first step of the update but when it goes to start step 2 it comes up with 'Update failed'.
If I remove the sd card and try to start up normally I get the blue screen.
I can get to the pink screen but I'm not sure what to do from there.
Thanks for any help.
Cheers,
H.
horrendo said:
Hi all,
I have a bit of a problem.
I had an old Oxygen (?) 2.3.? but wish to upgrade to ICS so after installing the 'official' 2.3.5 was following steps in http://forum.xda-developers.com/showthread.php?t=1420728.
I got up to the bit about installing Clockworkmod. When I tried to go into recovery mode for some reason (I must have screwed something up) it went back into the Firmware update (presumably because I still had the sd card with the 2.3.5 updated on it). It gets through the first step of the update but when it goes to start step 2 it comes up with 'Update failed'.
If I remove the sd card and try to start up normally I get the blue screen.
I can get to the pink screen but I'm not sure what to do from there.
Thanks for any help.
Cheers,
H.
Click to expand...
Click to collapse
IS it the pro or regular?
conect to computer in blue screen mode and watch what is missing.
Sent from not my ragelis
bronxitas said:
conect to computer in blue screen mode and watch what is missing.
Click to expand...
Click to collapse
Thanks for the suggestion. How do I see what is missing? I have tried various USB drivers but so far haven't found one that will mount the device. Do I need to use logcat with adb?
Any idea why it will no longer allow me to simply reflash the stock rom?
By the way, the device is the standard u8800 - not the -pro.
Cheers,
H.
Not in blue screen, you must go to pink screen mode(by pressing vol+/- end power when the device is turned off). There you'll be able to see the folder with the system files on pc.
dancer_69 said:
Not in blue screen, you must go to pink screen mode
Click to expand...
Click to collapse
bronxitas said:
conect to computer in blue screen mode and watch what is missing.
Click to expand...
Click to collapse
Now I'm confused.
When I connect the phone to my Windows computer (tried XP and 7 in both pink and blue modes), the device does not register. Windows detects the new device and asks for drivers. I have tried different ones but none that I've tried so far will see the device. If someone could give me a link to drivers that definitely work I would be most grateful.
Like I said in my original post, if I leave the SD card in it tries to do the firmware upgrade but fails. Is there no way to 'reset' the phone somehow so that the firmware upgrade will go through? Perhaps downgrade to an older version first??
Thanks,
H.
There is not blue screen mode. Blue screen just shows that the system files don't exist. If recovery image doesn't exist you get a blue screen when you try to reboot to recovery mode. If you cannot boot normally, probably boot.img is erased(or maybe all system files which are on Image folder are erased).
Also if you had flashe an official rom version higher of B518, you probably have a locked pink screen, so it doesn' t matter if you have or not drivers because you cannot access the special partition which has the Image folder with all system files anyway.
Now, if the update proccess of official rom stops or second step(after unpacking proccess), probably a partition on the device is corrupted and the update cannot write to it. There is a special update, which you can flash with the same way as the official rom(put it on dload folder), and maybe can solve the problem. I' ve posted it on another thread here before some time. The filename is: update-160up
try to search the forum and hopefully you will find the thread(which has some isntructions and comments also).
You can try to flash a 2.2 official rom also. Maybe the update will succeed then.
horrendo said:
Hi all,
I have a bit of a problem.
I had an old Oxygen (?) 2.3.? but wish to upgrade to ICS so after installing the 'official' 2.3.5 was following steps in http://forum.xda-developers.com/showthread.php?t=1420728.
I got up to the bit about installing Clockworkmod. When I tried to go into recovery mode for some reason (I must have screwed something up) it went back into the Firmware update (presumably because I still had the sd card with the 2.3.5 updated on it). It gets through the first step of the update but when it goes to start step 2 it comes up with 'Update failed'.
If I remove the sd card and try to start up normally I get the blue screen.
I can get to the pink screen but I'm not sure what to do from there.
Thanks for any help.
Cheers,
H.
Click to expand...
Click to collapse
Depending on your model you need to restore its pinkscreen stock files. The boot.img will fix the bluescreen. Heres oxygen's boot.img. Mount via usb to computer*
Somcom3X said:
Depending on your model you need to restore its pinkscreen stock files. The boot.img will fix the bluescreen. Heres oxygen's boot.img. Mount via usb to computer*
Click to expand...
Click to collapse
I have same problem and can not mount phone via computer seems the only way is via external sd card. will the phone boot off the sd card if the above boot.img is loaded on to it and where would i put this file. and should i take the 2.3 gingerbread update (dload/update.app)off the sd card and just have the boot.img file?
fookedit said:
I have same problem and can not mount phone via computer seems the only way is via external sd card. will the phone boot off the sd card if the above boot.img is loaded on to it and where would i put this file. and should i take the 2.3 gingerbread update (dload/update.app)off the sd card and just have the boot.img file?
Click to expand...
Click to collapse
you should flash the update again maybe?
Sent from my u8800-51 running popura ICS.
is it game over?
Somcom3X said:
you should flash the update again maybe?
Sent from my u8800-51 running popura ICS.
Click to expand...
Click to collapse
flashed normal gingerbread with update.app and update_custom.app in the dload folder. no luck, update failed. the phone does go into boot loop with huawei logo when power vol+- and plugged into external power. Help! I should say that i have recently upgraded it to official 2.3.5 firmware from 2.2 using and wanted to install dzo's aurora so i like others
"2. rooted with superoneclick
3. replaced .cust_backup/image/recovery.img with recovery.img (cwm5.0.2.7), by remount and es file explorer'
restarted, bang! blue screen restarted again with power vol-+ got pink screen but computer wont detect any storage on phone so i cant access the phone with the computer only via external sd card and the updates dont seem to work, i would like to try booting with froyo but cant find it anywhere....
so yeah, help, seems like game over to me!
Hello to all! :good:
It is the following: I have a Ideos X5 (not-pro) from a friend who tried to install a rom that is not made for this phone.
When trying to flash the rom (which was made for another phone), it stuck at boot (Huawei's logo).
Whenever you connect your phone gets stuck in the symbol of Huawei.
:crying:
On the mobile phone:
Is routed;
Do not have custom partition;
Can only access the pinkscreen;
Can't access the recovery;
I wonder if there is any way to fix it and if so what ...
I've seen the tutorial Blefish (here) and was wondering if I can use ...
miguel510 said:
hello to all! :good:
It is the following: I have a ideos x5 (not-pro) from a friend who tried to install a rom that is not made for this phone.
When trying to flash the rom (which was made for another phone), it stuck at boot (huawei's logo).
Whenever you connect your phone gets stuck in the symbol of huawei.
:crying:
On the mobile phone:
is routed;
do not have custom partition;
can only access the pinkscreen;
can't access the recovery;
i wonder if there is any way to fix it and if so what ...
I've seen the tutorial blefish (here) and was wondering if i can use ...
Click to expand...
Click to collapse
please someone to help me?!
If your friend installed a rom not meant for this phone, it might happen the /system or /boot images were installed to wrong place, messing up the phone. It would be a great help if you would link the rom your friend tried to install so I could see what is messed up.
If you can access pink screen, do you have the image/ folder with the boot.img and recovery.img?
By the way, if it is stuck on boot image, does it say anything in the PC? Like a device connected?
Blefish said:
If your friend installed a rom not meant for this phone, it might happen the /system or /boot images were installed to wrong place, messing up the phone. It would be a great help if you would link the rom your friend tried to install so I could see what is messed up.
If you can access pink screen, do you have the image/ folder with the boot.img and recovery.img?
By the way, if it is stuck on boot image, does it say anything in the PC? Like a device connected?
Click to expand...
Click to collapse
I think he tried to port a rom from Galay Ace and failed...
When i plug the phone in the PC (win7 - ultimate - 32bits) he try to install the drivers and fail...
The ADB drivers can't be installed...
But when he was intalling the recovery.img he did it with one file explorer, not plugin in the phone to the computer...
answer be patient
1st of all download b516 orginal rom and try to flash it when u do that all should be fine with recovery +/- and power then connect to pc replace recovery
Wicio0 said:
1st of all download b516 orginal rom and try to flash it when u do that all should be fine with recovery +/- and power then connect to pc replace recovery
Click to expand...
Click to collapse
But that's the problem!
When i go to pink screen to start the update he doesn't do anything...
And i can't go to recovery...
u need put dload on internal storage that 2gigs one.. and then just turn on phone to update itself.. u can try download ubuntu burn it on cd/dvd then u dont need to install it just open from cd then connect your device in pink mode mby ill see it
Wicio0 said:
u need put dload on internal storage that 2gigs one.. and then just turn on phone to update itself.. u can try download ubuntu burn it on cd/dvd then u dont need to install it just open from cd then connect your device in pink mode mby ill see it
Click to expand...
Click to collapse
How?
Can u be more specific?
Sure, what I mean is that ... linux is more like android than windows for example in much cases u dont need drivers to your device also file system is alike ex4 or other not ntfs ;P ,,, its worth tryin conecting it to Linux .... all u need is be patient and dont make stupid moves like throwin phone on wall (that not helps "tested on SE P1i")
Wicio0 said:
Sure, what I mean is that ... linux is more like android than windows for example in much cases u dont need drivers to your device also file system is alike ex4 or other not ntfs ;P ,,, its worth tryin conecting it to Linux .... all u need is be patient and dont make stupid moves like throwin phone on wall (that not helps "tested on SE P1i")
Click to expand...
Click to collapse
Not even with linux...
Hello there can you help me
My device got hardbricked by accidentally flashing s4 firmware..
I made my sd card as a usb jig(created by win32 disk manager), thanks to XDA posts. Then I used odin to flash s3 firmware . Odin shows no any errors .after sucess flash mobile go upto samsung logo ,then it get struck & show a blue screen for a second then it goes restarting.
Plz help I even tried PIT partion procedure,Nand erase ,
Inserting a bootloader it always give me same result
And when I removed sd card it show black screen wont even on.if I insert sd card s3 will be alive again.
Hello Desham123
Will u plz provide complete info about ur device so I can help u.?
? Device: GTI9300I or GTI9301i
?Firmware downloading link ( you hv downloaded from )
?Have you used any custom recovery? Like TWRP or CWM or Philz?
?plz provide above information. It'll help me to short out ur problem. ☺
deshanm123 said:
Hello there can you help me
My device got hardbricked by accidentally flashing s4 firmware..
I made my sd card as a usb jig(created by win32 disk manager), thanks to XDA posts. Then I used odin to flash s3 firmware . Odin shows no any errors .after sucess flash mobile go upto samsung logo ,then it get struck & show a blue screen for a second then it goes restarting.
Plz help I even tried PIT partion procedure,Nand erase ,
Inserting a bootloader it always give me same result
And when I removed sd card it show black screen wont even on.if I insert sd card s3 will be alive again.
Click to expand...
Click to collapse
Hard bricked means a dead phone, so you will have to change the board.
Using the SDCard as a portable Nand isn't practical, you should replace the board eventually..
PankajRastogi said:
Will u plz provide complete info about ur device so I can help u.?
? Device: GTI9300I or GTI9301i
?Firmware downloading link ( you hv downloaded from )
?Have you used any custom recovery? Like TWRP or CWM or Philz?
?plz provide above information. It'll help me to short out ur problem. ☺
Click to expand...
Click to collapse
Sir your help will be appreciated.
I have downloaded them all for GTI9300I. But I donot know the correct procedure.
I created debrick disk image when I inserted that to phone it ill show samsung logo .then I do the wipe & factory rest .then I connect odin then I flash the rom.it get boot up to samsung logo it get restarted.
Also when I remove my sd card it will be dead again (no respond screen totally blacked ,couldnt do without sd card)
Please will you help me to correct me if im wrong .
is it wrong with sd card im using 2gb card which is not sandisk and not class 10
I have even pit file but donot know what to do
I do these above produres using stock recovery mode . I got twrp flash file also but I have no idea what to do
Please guide me & i will take total responsibility im tired of my s3
https://forum.xda-developers.com/galaxy-s3-neo/general/how-to-unbrick-t2911301 try this
i tried all twrp versions out there and tried many odins versions, some cause my tab to stuck at logo and some like this, i did try to go to recovery very fast and perfect but it won't work .. i just want my files in internal storage back please help me i just want files back .. when i connect my tablet with cable it shows me micro sd but no internal storage .. anyway to save them?!
Bro, I also had this problem and decided to do the same procedure using a different file.
I downloaded in this link: http://fixfirmwares.com/sm-p585m-cf-auto-root/