Hey,
I've tried to flash my lg g2 d802 with CM 11 with TWRP recovery
after 5 minutes is says : "fail"
I selected reboot system the phone stuck on the lg logo and the phone won't boot
then I've wipe everything
tried to boot the phone the phone won't boot
then i read a thread on XDA : http://forum.xda-developers.com/showthread.php?t=2451696
via "terminal command" method and the phone won't boot
then I booted the phone into download mode and downloaded kdz file then i tried to use the flash-tool and I have the "lg drivers" and also "lg-mobile support tool"
then the flash-tool is not responding :/
so what i can do ?
and should I wait for kitkat official update or flash rom ?
and if I want to flash rom which one is better for lg g2 d802 ?
Well did you make a backup b4 you tried flashing the rom to restore it if anything were 2 go wrong ? Its most likely it flashed partially but it wiped your original rom thats why u couldnt boot . if you can still boot into recovery mode try flashing a diffrent rom if you have any downloaded
Hellfire and liquidsmooth are best 4.4 roms...
Try installing these roms..
Hello,
I have LG G2 (d802 polish version) with 4.2 rooted stock rom, Installed pac rom two days ago and then (stupidly) changed build.prop ro.sf.lcd_density value from 480 to 240 and since then phone is bricked It's either booting forever (LG logo) or booting all the time to recovery mode( I have installed CWM recovery, and later Philz CWM). Now the good side is:
- I can get to download mode and connect to LG Flashtool. .When flashing the tot file BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G from XDA Storagecow.eu site, I can connec the phone via USb, change the port to 41 and it starts flashing. HOWEVER, when flashing the stock rom, LG flashtool skips all the partition and flashes it in seconds, then stops at 84 percent, tries to get factory reset,waits for it120 sec and then I have the error DOWNLOAD FAILS. What can be the problem here? Earlier I flashed the same bin file without any problems, and it didn't skipped through partitions , and everything went fine. WTF? Seriously maybe someone knows because I am desperate here. Already trying 2 days to figure it out. Haven't tried the KDZ method yet, because I have Windows 8,1 , and I am having permission errros while trying to flash. I will atttach a screenshot of LG flashtool skipping all the partitions whil flashing soon.
Please HELP!
clarification
In any case I am just asking why Lg Flash Tool is skipping all the partitions and flashin properly and then stopping at 84 and not restarting ? How can I flash back to stock? Any advice appreciated. thanks.
anyone can help?
Allrite bro..i oso facing a same problem with bootloop..i was at 4.2.2 stock rom with rooted and with twrp recovery too. After i update to ota 4.4 kitkat my g2 was bricked..its just boot with LG Logo and is was not boot up. Allrite. U can try to this tutorial. .pls doublecheck izzit u (flashing DLL) file was correct, and izzit its.match with firmware that u download? Pls.ensure tat..if that both file was correct and matching, is should be ok when u flashing. ..hope i can sharing to u. And sori about my Bad english..
Sent from my LG-D802 using xda premium
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
collller said:
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
Click to expand...
Click to collapse
Did you try to let LG Mobile Support Tool download and flash matching ROM file automatically? That worked for me when I was stuck in LG logo boot loop. In order to make Support Tool reflash ROM select menu Extra Featrues and then Reset Upgrade Error (or something like that - having tool in german here ) Of course phone must be in download mode and connected to PC.
Hope this helps
After kdz/tot flashing you might have to reset the phone.
either:
Hold volume down + power, wait for lg logo, release keys and hold them again (then proceed to factory reset)
OR
Hold volume down + power, wait for lg logo, release keys and hold volume up + volum down (then proceed to factory reset)
Did you solve this?
hi
i have a problem i have a lg optimus L5 e615, i think i sent it to hell :d, i tryed to root it and to install a custom recovery and it goes right, then i tried to install a custom rom but i didn't release that its for e610 it installed well, but i couldn't follow the configuration wizard because the screen wasn't enable, i release that it not the propriate rom, then i tryied to install the V20D_00.kdz with LG KDZ updater but after i couldn't use my phone anymore it's stuck in boot i can't access to emergency mode, i can't use recovery mode, i totally scrowed up !
is there any hope to get my lg optimus L5 e615f back to use ?
i really need your help
Hi
I flashed blisspop rom today but it said sim pin operation failed so i was unable to setup my custom rom. After that i tought using lg flash tool would help me and i tried flashing every kdz file for my lg d802 and every time i get stuck at the boot logo. Please help me !
Try to use cse option on LG flash tools, you will loose all data in the phone!
Enviado do meu LG-D802 através de Tapatalk
magonydavid said:
Hi
I flashed blisspop rom today but it said sim pin operation failed so i was unable to setup my custom rom. After that i tought using lg flash tool would help me and i tried flashing every kdz file for my lg d802 and every time i get stuck at the boot logo. Please help me !
Click to expand...
Click to collapse
After kdz dont boot to system...lookup button combo for factory reset on your model and factory reset
- LG E612 stuck in lg logo after I update v20f stock rom (4.1.2).
I tried an update by LG Support Tool, KDZ Update, LG Flash Tool 2014 but remains stuck in lg logo.
- I also try to update rom available v20d root, unlock bootloader & recovery but still hanging.
- My phone is damaged the volume down button, I can not access the hard reset or recovery.
What can I do? Please help me .. Tks
You should hard reset your phone if you want to keep the updated software. Or you can re-install the V20F firmware via KDZ Updater tool.. Try that.. However you should fix your volume keys because all above mentioned methods requires that.