I need to restore my original T-Mobile ROM to send the hardware in for repair. I have tried ROMS supplied from 2 different sources to no avail. They are all exactly the same size... 33292288. Everytime I try to use the OSImage Tool to copy it to my 256MB SD card, I get this error immediately...
C:\....\tmo.nb1: incorrect filesize(33292288), file should be exactly 32243712 bytes error opening input file.
I am stumped. Anyone know how to get by this?
mmm, the top 1M of your nb1 does belong in the os image part of the rom,
it contains the save contacts etc.
you can either delete it yourself using a hexeditor or other binary file editor.
Your file has to end at offset 0x01ec0000
or wait until I make osimagetool less strict. ( which might not be soon )
Just for the hell of it I'd give XDArit and try, you never know
it might work!
HTH
XDA developer Itsme said:
mmm, the top 1M of your nb1 does belong in the os image part of the rom,
it contains the save contacts etc.
you can either delete it yourself using a hexeditor or other binary file editor.
Your file has to end at offset 0x01ec0000
or wait until I make osimagetool less strict. ( which might not be soon )
Click to expand...
Click to collapse
Would you mind editing it for me if I sent the file to you? I could let you ftp the file and then replace it. I need to get this device in for repair because my contract is almost up... in less than a month. Thanks.
ok, better do some programming than fileeditting.
update is at http://www.xs4all.nl/~itsme/download/oit_105.zip
you have to start it with a commandline option '-f' to disable filesize checking.
Still no good. Now I get ... Error writing 00008000 bytes to 00b18400: Data error (cyclic redundancy check). I've tried two different T-Mobile images from two totally different people and the files are the same size, and they both get the exact same error. Any ideas?
when does this error occur? in osimagetool?
this would point to a faulty sd card I think.
It happens mid way through the load in OSImage Tool... loading to the SD Card. I've been using this card for a year... just about full of stuff... and never had a problem before. Even used XDArit to grab an image from my XDA, and to load the XDA Developers ROM onto it. I'll see if I can get another card. Thanks for trying help me figure this out. I may try the card in a store on a display unit and see if I can grab an image with the bootloader.
Hi folks
I have the same problem that Mike had - the one with the wrong filesize.
Unfortunately the posted link to the updated version of OSImagetool is down. Is there any chance someone could fix that?
Thank you very much in advance.
Chris
hippokrates said:
Hi folks
I have the same problem that Mike had - the one with the wrong filesize.
Unfortunately the posted link to the updated version of OSImagetool is down. Is there any chance someone could fix that?
Thank you very much in advance.
Chris
Click to expand...
Click to collapse
You can get it at:
http://xda-developers.com/~itsme/download/oit_105.zip
HTH
Stefan
Vielen Dank / Thank you very much it worked just perfect.
By the way, this could also be interesting for you Stefan: the reason I was searching for the OSImage Tool was because of the german ROM 4.00.33 Mathias was so kind to share. It is the first german version I could get my hands on and i now have the good old qwertz-keyboard back.
Mabye Jeff or someone else could put it into the kitchen for all german/swiss/austrian XDA users ??? I would think a lot of people would appreciate this.
Chris
Hello,
Just picked up an imate JAMin and i'm loving it!
I've noticed however, that it is creating massive log files, the first will get to 3mb, then it will index and get another one going to 3mb and so on.
Error reporting is disabled and I can't find anywhere else that has an option for debugging.
Searched through the forums as well, so apologies if this is a simple answer.
The file it creates is DbgToStorageLogX.txt where X is a number.
Any help appreciated. - Thanks, Craig.
Where exactly do these files reside?
I looked for them on my Jamin with the latest i-mate ROM, but did not find them anywhere. It's been a month since I hard reset the thing.
Maybe you got a debug ROM version by mistake?
They are sitting in the root directory "\"
Other than the large files - it's also logging gprs (called gprs_debug) and BG_debug - which is backgammon bug log.
So - somewhere there must be a toggle that is causing it to log these files.
Thanks for the reply.
Craig.
All pm reply i dont sent anymore
I rply to all pm i forget to say i dont now how to work whit this
sorry bad english
You have a PM from me!
ok, he send it to me after my p.m, attached to an email.
i took a look quickly, it seems serious, but complicated. u need a SD card, and, moreover, it looks like it flashes the Artemis, so i am not ready to do it first.
i will do it after some feedbacks.
here is the archive.
there is also a .doc tutorial, step by step, nice try guys. if someone succeed, tell us about it plz.
xplod1001 said:
ok, he send it to me after my p.m, attached to an email.
i took a look quickly, it seems serious, but complicated. u need a SD card, and, moreover, it looks like it flashes the Artemis, so i am not ready to do it first.
i will do it after some feedbacks.
here is the archive.
there is also a .doc tutorial, step by step, nice try guys. if someone succeed, tell us about it plz.
Click to expand...
Click to collapse
Iff i wont to atach the file i atach but this is original stuff can bring problem to forum that why i dont put here the file
ok sorry mate, but i dont know how to remove it.
can a moderator delete my attached file plz thx.
Hey man, can you get one CID Unlock?
1. Execute this app.
2. Insert the HTC customized key card into SD card reader and assign the SD Drive to this app.
This key card should be customized by HTC before. It should contain following files:
a. excadiag.nbh / Artediag.nbh --> The signed NBH file of CST diagnostic image.
b. diagdata.dat --> The encrypted RSA key file.
3. Import an IMEI list and assigned an output file path for IMEI/Unlock code mappingg.
4. Input the MCCMNC code which will be assigned into those devices.
5. Press the "Generate SD Card" button to generate configuration file into SD card.
After this process, you will find a cstdata.dat file into the key card. And you can also find
an IMEI/Unlock code mapping table into the path that you assigned before.
You may insert the key card in the HTC device which you want to enable SIM lock in power off status. Enter bootloader mode. The key card will automatically start to enable SIM lock mechanism ,
ok, i took a serious look on that tool, and i am blocked at 4th step. i have to input my MCCMNC but i dont know what it is. it searche on google and find mine:
mcc = mobile country code. i'm from france so my mcc is 208.
mnc = mobile network code. mine is orange: maybe 01 or 03, dunno.
etc
can som1 would be more precise about this point plz?
Table of MCC and MNC Codes
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hmwg_c/mwgfmcc.htm
http://www.flatbatt.co.uk/Unlocking/Network_codes/network_codes.html
nice. usefull.
i'll try again.
doesn't work. every time i "generate SD card" the unlock code is different. so... it sucks...
xplod1001 said:
doesn't work. every time i "generate SD card" the unlock code is different. so... it sucks...
Click to expand...
Click to collapse
I think yor are right !!! It does not work.
Every time i generate SD card i got another unlock code.
An when i set ppc in bootloader mode to unlock nothing happens!!!
it seems like inserting the memory card with the files really is not necessary. as far as i am concerned, i just take a look on my output file to pick up the unlock code after the sd card is generated.
but as said before, the curious thing is that it always generates a different unlock code.
wtf?
What if you run the memory card with bootloader first and it creates a file on the card? Just an idea.
I would try it, but I can not get bootloader to work, it just goes to a multi-coloured screen!
did anybody get this to work?
MaskedMarauder said:
What if you run the memory card with bootloader first and it creates a file on the card? Just an idea.
I would try it, but I can not get bootloader to work, it just goes to a multi-coloured screen!
Click to expand...
Click to collapse
it doesn't work like this.
try the tool and you'll understand.
http://www.mezimages.com/up/07/377588-376946-Image1.jpg
doesn't work, too bad
I also tried it and yes, it randomly generates unlock codes. and no, putting it into bootloader (record button + soft reset) doesn't do anything. it only says reading content from usb card, but it doesn't unlock it! when i put in another sim, i get an unlock screen after putting in my pin, and then when i try the unlock code provided by the unlocker, it fails.
so, the unlocker did not work for me but i might be doing something wrong... as for now, thanx for the effort of putting it up online, but we will have to wait for another solution.
Maybe try cstdata.dat as unlockfile for the software used by imei-check?
Don't know if that's gonna work cause I don't know what the unlockfile imei-check gives you looks like.
.................................
I've been coming to this website for a while now, and this is my first time starting a thread. I've found myself with this problem. when I go to access my albums I get an error that my phone can't find albumsearcher.exe file. it also won't let me access programs that I've installed on my storage card. is there a cab to fix this problem? if there is a thread that already covered a solution for this particular problem please forward link. thank you.
Hi, ( i hope this is the right forum for this or if not can someone please help me or direct me to the right now to resolve this) just wondering if anyone(s) out there that had this problem after they had any of the TMOUS HD2 'Driods' hacks installed on a SD card, had it running for a while, then turn off your phone, try to restart and get this error (this is occuring on both the CLRCAD and HARET programs) "The File 'XXXX" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem preresist, try reinstalling or restoring this file". i have already formatted and reinstalled the files on the SD card and been to most of the forums here about this issue for their resolution. (all with no luck) If there anyone out there with a simple resoultion (hopefully nothing too complex like a reg hack) can you please help me out with this issue. Thanks in advance
You could Google for and then run once its downloaded the program SDA Unlock, it may remove that warning for you.