I extracted this from a STOCK Telcel ROM and I've found that this is perfect for a Mexican carrier (TELCEL) user.
No data connection problems so far
Upped this and made the Modem thread since I havent found a repository for N7100 modems.
Flash with your favorite recovery (I use CWM).
Enjoy!
https://mega.co.nz/#!5dV2VJzY!TL3mtAlRA0t6z2gh_uzxA3BytJQHY7_9ASLrY4x-Xek (5.0 MB)
Hit thanks if this helped you at all !
Would there be any problem if I flash this on a T-Mobile Note 2, the t889? Under the imei sticker on the back of the phone it says N7105.
Luisj_mc said:
Would there be any problem if I flash this on a T-Mobile Note 2, the t889? Under the imei sticker on the back of the phone it says N7105.
Click to expand...
Click to collapse
Do not do that, Telcel modem is intended for the N7100, N7105 uses a completely different modem, even if you're able to flash the modem it will not work at all.
luismedina said:
Do not do that, Telcel modem is intended for the N7100, N7105 uses a completely different modem, even if you're able to flash the modem it will not work at all.
Click to expand...
Click to collapse
Thanks man good to know... Also T-Mobile just teleased a new modem for the Note II enabling LTE for their customers im the states. I love in Guadalajara, Jal. LTE has been enabled here do you know if ill be able to connect to thosr speeds using this device. I havnt been able test it i need to upgrade my sim card first.
marcotics said:
I extracted this from a STOCK Telcel ROM and Ive found that this is perfect for a Mexican carrier user (like me).
Upped this and made the Modem thread since I havent found a repository for N7100 modems.
Flash with your favorite recovery (I use CWM).
Enjoy!
https://mega.co.nz/#!5dV2VJzY!TL3mtAlRA0t6z2gh_uzxA3BytJQHY7_9ASLrY4x-Xek (5.0 MB)
Hit thanks if this helped you at all !
Click to expand...
Click to collapse
Exactly what does this modem is for? I live in monterrey mexico and i have the n7100 and also i have the 4g lte service on my line with telcel and the sim card 4g, but this phone isnt 4g lte
Sent from my GT-N7100 using xda premium
Luisj_mc said:
Thanks man good to know... Also T-Mobile just teleased a new modem for the Note II enabling LTE for their customers im the states. I love in Guadalajara, Jal. LTE has been enabled here do you know if ill be able to connect to thosr speeds using this device. I havnt been able test it i need to upgrade my sim card first.
Click to expand...
Click to collapse
As far as I know, LTE has been enabled in Guadalajara metropolitan area, first of all, you need a 6.0 SIM card in order to use Telcel LTE network, a LTE enabled device (N7105).
The LTE network used by Telcel and T-Mobile is AWS-1, so, it should be compatible as long if your T-Mobile N7105 has the new modem that enables this feature.
---------- Post added at 04:44 PM ---------- Previous post was at 04:40 PM ----------
rubennd said:
Exactly what does this modem is for? I live in monterrey mexico and i have the n7100 and also i have the 4g lte service on my line with telcel and the sim card 4g, but this phone isnt 4g lte
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
This modem only allows better reception and data speed with the Telcel 3G network, even if you have a LTE enabled SIM card (6.0) you will not be able to use LTE with the N7100, only 3G HSPA+. However, with a 6.0 SIM card LTE enabled, it improves the 3G connection, according to my tests, the download speed with this SIM is around 6-10 Mbps
rubennd said:
Exactly what does this modem is for? I live in monterrey mexico and i have the n7100 and also i have the 4g lte service on my line with telcel and the sim card 4g, but this phone isnt 4g lte
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I had a LOT of problems using modems that came with other roms. They just didn't acquire a constant and always-on data connection with telcel.
By flashing this I have had a near perfect data connection so far!
info
Hello, can you post the information you get after *#1234# in your note 2,
I am from Mexico and just whant to check if I have the lates Official Rom
My info:
AP : N7100UBALH2
CP: N7100UBLH2
CSC: N7100TCEALH2
Thank you
Lots of thanks
Dude! you just made my day...and week....saved my life (sort of)
Flashed this modem, 3G is back online!!
Thanks a lot mate!:victory:
CanĀ“t Downlad
i dont know why i cant download from mega, can anybody upload this to another server or email to me pleeeease, and by the way i am on paranoid android rom it will work on it? or not
Related
Hi,
I have SGH-M919V and its unlocked.
I am on Bell and want to use LTE. But this model has LTE disabled. when i enable it, cant make phone calls.
I cant seem to flash T mobile modem via odin. there is this secure boot issue. the AUTH: Fails.
I was thinking of installing Bell SGH-I337M rom on my phone. Is that possible? If so, how do I go about doing it?
Thanks!
Since you have a T-Mobile variant you should ask in the sgs4 tmobile forum...
However your problem with lte/phonecalls is likely just an APN issue
To further assist we would need to know which carrier you are using the device on
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
mg2195 said:
Since you have a T-Mobile variant you should ask in the sgs4 tmobile forum...
However your problem with lte/phonecalls is likely just an APN issue
To further assist we would need to know which carrier you are using the device on
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Hey. thank you for the reply, I really appreciate it.
I've been asking a lot there. No one is answering.
Please help me out, please.
My phone is Canadian variant, originally from WindMobile - SGH-m919V. Wind uses Tmobile freq. = 1700/2100 (AWS) only. No LTE.
I got it unlocked two days ago, and switched over to Bell carrier. Bell uses the other freq and LTE.
When I do force LTE by *#2263# - and enable all LTE, i get LTE speeds. But NO calling or texting. this is with the original Windmobile stock rom. No modification. No root.
I tried to flash Tmobile modem via odin 3.07, didnt work. I used the phone button to load the modem.bin. It gave me AUTH: Fail, secure check fail.
I agree, wrong forum, but we are here to please....
if you have a M919V then you would flash the rom you want, before you boot, flash a tmo m919V kernel, it will boot, manually add your apn settings for your device, it will work with data/wifi/calls.
Good luck....
Hi, im sorry for posting in this forum.
so if I want to flash the bell rom - I337M stock original rom , how do I flash it without booting??
And then how would I flash the tmobile kernel so then I can boot??
I dont mind keeping my current rom - wind stock. But, I want to be able to use LTE like how tmobile has pentaband 3g plus lte.
:/ .
First time forum user looking for some answers and a bit of help so thanks in advance for anything you can provide!
I just bought a Samsung Galaxy Note 3 from WIND Mobile in Canada. The model number was SM-N900W8. It seems although carriers know the device has the required bands, they limit listing them on their website if they do not support them and go one step further by having Samsung block the bands through some type of software cripple.
My concern is I use WIND Mobile when local and Telus Mobility when in fringe areas which WIND Mobile does not cover. Prior to buying this device from WIND outright, I confirmed with Samsung live chat support this specific model from WIND will support LTE on Telus. I was told I must first activate the device on WIND and they once I unlock the device, I can configure the Telus APN settings for use on the Telus network. When I do this, I get a max speed of 3G and in the network connections, it does not show: LTE/WCDMA/GSM (auto connect) but instead, the 3 original modes which you can select when on WIND Mobile: WCDMA/GSM (auto connect), WCDMA only and GSM only.
It seems as if the unlock and APN settings are the first 2 parts but in order for LTE to work, you must disable the cripple which Samsung has implemented for it's distribution to WIND Mobile since they do not support that frequency or radio band. My concern is it looks as if this must be done through a root or flash and I hear about phones getting bricked. I paid a lot of money for the device and cannot afford to damage it so do not know what options I have.
If I do enable LTE through a flash and then get an OTA Samsung update, will this remove the flash? How must I go about getting LTE enabled permanently without issue or is this not possible? Thank you for the help!
Hi fellow Windman
just follow this easy guide http://forum.xda-developers.com/showthread.php?t=2471340
everything is self explanatory, including LTE
AllGamer said:
Hi fellow Windman
just follow this easy guide http://forum.xda-developers.com/showthread.php?t=2471340
everything is self explanatory, including LTE
Click to expand...
Click to collapse
Thank you so much. I will follow this guide word for word but is there any risk of bricking my phone like I have read so much about? The last thing I want to do is mess something up and have a paperweight.
If I root the device as suggested and receive an OTA notification from Samsung to update the software, will this lock everything again and make me go through the procedure all over again or will it be permanently enabled? Thanks!
AllGamer said:
Hi fellow Windman
just follow this easy guide http://forum.xda-developers.com/showthread.php?t=2471340
everything is self explanatory, including LTE
Click to expand...
Click to collapse
So, I rooted the device and assume it was successful since I have the SU (Super User) App installed. I ran the TWRP file which I assume is the OS which enables all the crippling Samsung initially implemented when releasing this phone to WIND Mobile but the problem still stands. I have entered all the correct APN settings for Telus yet it still only provides a 3G connection. Have I done something wrong and can any of you gurus familiar with rooting and updating a custom OS provide some insight. Thanks!
I think I'm worse than a noob. At least they can figure this stuff out! I followed the quick root steps and the twrp steps but was I supposed to do something else to enable LTE? The phone is definitely rooted and has the SU App installed. TWRP just seems like a program which allows installation of a custom ROM directly from the device but I may be wrong. My concern is the TWRP file I downloaded looks as if it's a tar file which the phone loads allowing HSPA and LTE capability. If so, it did not work on my WIND device.
You can't get the OTA if you have custom recovery installed. I.e. TWRP or CWM. You gotta wait for custom roms. I don't know about the lte thing
Sent from my Nexus 4 using XDA Premium 4 mobile app
cellrama said:
I think I'm worse than a noob. At least they can figure this stuff out! I followed the quick root steps and the twrp steps but was I supposed to do something else to enable LTE? The phone is definitely rooted and has the SU App installed. TWRP just seems like a program which allows installation of a custom ROM directly from the device but I may be wrong. My concern is the TWRP file I downloaded looks as if it's a tar file which the phone loads allowing HSPA and LTE capability. If so, it did not work on my WIND device.
Click to expand...
Click to collapse
yea you're totally wrong here man... not sure how to enable lte capability, but wind's network is hspa+ already so that's enabled.
i do know you have to unlock it, likely with a sim unlock code or getting someone to unlock it, but after that, the theory is, that it should work.....
WIND is 4G and I have unlocked the device already. I am using a Telus SIM card and have correctly entered the Telus APN settings for LTE but it does not show LTE as a network mode which I can select. Seems to me Samsung has crippled this band since WIND does not support it. Since I have rooted the device, which I probably didn't need to do, I was hoping to find a flash which will permanently enable the LTE so it will function on Telus.
To use Telus LTE you need to switch to the Telus SIM card
then it should read the Telus APN from it, if not you can enter the Telus LTE APN and it should use it
AllGamer said:
To use Telus LTE you need to switch to the Telus SIM card
then it should read the Telus APN from it, if not you can enter the Telus LTE APN and it should use it
Click to expand...
Click to collapse
I have done this already. The steps followed to date are as follows:
Purchased my WIND Mobile Galaxy Note 3 (model: SM-N900W8)
Unlocked the device through cellunlocker.net for 32.99 USD
Placed my Telus SIM into the device and it read the details. I was able to call and text without issue but did not have data connectivity. Contacted Telus and received the Telus LTE APN details and entered this information. Unfortunately, the network mode only shows 3 options: WCDMA/GSM (auto-connect), WCDMA only and GSM only.
There should be a fourth option for LTE capability but this is not displaying. I rooted my device and followed the TWRP step thinking this TWRP file was the rom to enable the LTE capability which seems to be locked but this is not the case. I am way off here but know it's probably something simple which I am missing!
yes, the 4th option for the LTE needs to flash another modem
i got it working here http://forum.xda-developers.com/showpost.php?p=46259468&postcount=39
find any of the Note 3 threads with flash-able modems, and flash the one from Puerto Rico that enables the LTE
AllGamer said:
yes, the 4th option for the LTE needs to flash another modem
i got it working here http://forum.xda-developers.com/showpost.php?p=46259468&postcount=39
find any of the Note 3 threads with flash-able modems, and flash the one from Puerto Rico that enables the LTE
Click to expand...
Click to collapse
To confirm your above statement, am I going to the following page and downloading the firmware for Puerto Rico?
http://www.samsungis.com/Firmwares/SM-N900W8.html
or must I locate a thread to download just modem firmware and then follow the same ODIN instructions as I did with the other files?
Thanks!
cellrama said:
To confirm your above statement, am I going to the following page and downloading the firmware for Puerto Rico?
http://www.samsungis.com/Firmwares/SM-N900W8.html
or must I locate a thread to download just modem firmware and then follow the same ODIN instructions as I did with the other files?
Thanks!
Click to expand...
Click to collapse
you only need the modem, you don't need to flash an entire ROM.
there was a reference topic with a list of downloads for all different modems for the Note 3 in the General section of this Note 3 portion of the forum. http://forum.xda-developers.com/showthread.php?t=2475714
they are still uploading all the different models, you you might want to wait a bit, or you can extract it on your own, if you know how to do that from an odin .tar file.
AllGamer said:
you only need the modem, you don't need to flash an entire ROM.
there was a reference topic with a list of downloads for all different modems for the Note 3 in the General section of this Note 3 portion of the forum. http://forum.xda-developers.com/showthread.php?t=2475714
they are still uploading all the different models, you you might want to wait a bit, or you can extract it on your own, if you know how to do that from an odin .tar file.
Click to expand...
Click to collapse
Following the link you provided, it indicates the modem for model SM-N900W8 is "coming soon..." so it does not look like a modem is available for my model at this time. I tried looking for the Puerto Rico modem flash which you used but I do not see reference to it.
I was going to install the SM-N900W8 ROM for telus which would have the modem but as research indicates, if you install the wrong carrier ROM, you brick your device. I may have misinterpreted this but the last thing I wish to do is brick my device and have an expensive paper-weight in the end. Thanks again!
cellrama said:
I was going to install the SM-N900W8 ROM for telus which would have the modem but as research indicates, if you install the wrong carrier ROM, you brick your device. I may have misinterpreted this but the last thing I wish to do is brick my device and have an expensive paper-weight in the end. Thanks again!
Click to expand...
Click to collapse
the Puerto Rico ROM is safe to flash
actually anything that is for the SM-N900W8 are safe to flash
AllGamer said:
the Puerto Rico ROM is safe to flash
actually anything that is for the SM-N900W8 are safe to flash
Click to expand...
Click to collapse
So I just got my phone unlocked with cellunlocker.net code, threw in a bell SIM and rebooted etc, it worked and was pretty quick but nothing too incredible. Was getting top download speeds of about 750kb/s (or 6mbps) whereas on wind I'd get about half that tops in my current location. My question here is, the phone said 3g....to me that seems way too fast for 3g but not nearly right for lte and I also couldn't see lte as an option for the bands. I assume that's cuz I still had the wind modem on the phone? Even when I went into the *#2263# screen to enable lte it still didn't work....
Any ideas? Should I flash the Puerto Rico Rom? Does it still work on wind bit just also let you use the lte radios when the correct SIM is in?
cellrama said:
Unlocked the device through cellunlocker.net for 32.99 USD
Click to expand...
Click to collapse
asaqwert said:
So I just got my phone unlocked with cellunlocker.net code ...
Click to expand...
Click to collapse
How long did it take to get your unlock code with cellunlocker.net? Which device did you pick in the dropdown?
I got a quote for 14.99 but guessing you have to pay more for a secondary search later?
UPDATE:
Never mind just got the code and it worked Cost me 14.99.
Hi did you manage to enable the LTE bands on your phone. I am on the same boat, have a WIND note 3 and I would like to do the same.
Thank you
fidos said:
Hi did you manage to enable the LTE bands on your phone. I am on the same boat, have a WIND note 3 and I would like to do the same.
Thank you
Click to expand...
Click to collapse
I'm really new to this but hopefully this will clarify some info regarding WIND and please correct me should I be wrong. There are two things when working with a phone. Customization to the OS and proper data connection. If you wish to tweak your device, push it to the limits and customize your OS settings, you can root your device.
If you wish to just enable LTE so you can use it on an LTE capable network like Telus, Bell or Rogers in Canada, you must flash the proper modem file to enable LTE. As I understand, the Puerto Rico Modem Flash will allow you to enable LTE data on the WIND Mobile variant of the Note 3. You can get the Puerto Rico Modem Flash from Post #27 by AllGamer at the following link:
http://forum.xda-developers.com/showthread.php?t=2475714&page=3
I think this is safe but I'm waiting for clarification from AllGamer regarding what is meant by their statement "NOT for flashing!". Once confirmed, I'll update this post but if this works, I feel they should be thanked by clicking on the thank you button and a donation should be made for what you feel this information is worth and obviously, what you can afford. Without individuals like this, we would be at a stand still for modifications!
THANK YOU ALLGAMER FOR YOUR UNSELFISH DEMEANOR ON THE FORUM!
cellrama said:
I'm really new to this but hopefully this will clarify some info regarding WIND and please correct me should I be wrong. There are two things when working with a phone. Customization to the OS and proper data connection. If you wish to tweak your device, push it to the limits and customize your OS settings, you can root your device.
If you wish to just enable LTE so you can use it on an LTE capable network like Telus, Bell or Rogers in Canada, you must flash the proper modem file to enable LTE. As I understand, the Puerto Rico Modem Flash will allow you to enable LTE data on the WIND Mobile variant of the Note 3. You can get the Puerto Rico Modem Flash from Post #27 by AllGamer at the following link:
http://forum.xda-developers.com/showthread.php?t=2475714&page=3
I think this is safe but I'm waiting for clarification from AllGamer regarding what is meant by their statement "NOT for flashing!". Once confirmed, I'll update this post but if this works, I feel they should be thanked by clicking on the thank you button and a donation should be made for what you feel this information is worth and obviously, what you can afford. Without individuals like this, we would be at a stand still for modifications!
THANK YOU ALLGAMER FOR YOUR UNSELFISH DEMEANOR ON THE FORUM!
Click to expand...
Click to collapse
Thank you for your reply. I am not sure why everything sounds so complicated.
I was able to flash a small file to my S4 (rogers) to enable the WIND bands. The phone did not need to be rooted, ODIN worked like a charm and my S4 became pentaband
This ordeal with the note 3 is not as straight forward. I have been following all your post but I see that you have not received any straight forward answers to your questions. I am not an expert when it comes to rooting or flashing so I would love a simple way of doing this.
Thank you again, lets hope that we will find an easy way to do this
does anyone know where I can get the t-mobile modem? I want to replace it with the one I have on my N9005 to get LTE speeds
I need this one too.
Where can we find the T-Mobile modem for N9005?
samanbabah said:
does anyone know where I can get the t-mobile modem? I want to replace it with the one I have on my N9005 to get LTE speeds
Click to expand...
Click to collapse
Go to sammobile.com, search for your firmware, download and extract modem.bin from there. That's the file you need.
---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------
BOTICSELLI said:
I need this one too.
Where can we find the T-Mobile modem for N9005?
Click to expand...
Click to collapse
for example, firmware for Hungary T-Mobile is here: http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=TMH#firmware
download and extract modem.bin from there. Then you can make this file flashable by Odin.
Not as easy as it looked. You have to get your phone to read the bands that T-Mobile is working with. There is a bunch of us, even a bounty out for it! Trying to get the N9005 version to read At&t LTE bands! Sure you can flash the modem but unsure if it'll work. Keep us updated though if you do flash and receive LTE service!
PatienceWithin said:
Not as easy as it looked. You have to get your phone to read the bands that T-Mobile is working with. There is a bunch of us, even a bounty out for it! Trying to get the N9005 version to read At&t LTE bands! Sure you can flash the modem but unsure if it'll work. Keep us updated though if you do flash and receive LTE service!
Click to expand...
Click to collapse
anybody know if there have been any successes getting lte working on tmobile / at&t on the n9005 via modem flash?
cpgeek said:
anybody know if there have been any successes getting lte working on tmobile / at&t on the n9005 via modem flash?
Click to expand...
Click to collapse
From what I can gather, due to others having same issues, it hasn't been possible (yet) one user notably @PatienceWithin had to sell his 9005 and get an 900A
just polling the community to see if anybody has figured it out yet or has gotten any closer... I'd really rather not resell my phone and buy a 900t but i really want lte... the baseband on these things are pure software, are the same baseband hardware as the tmo and att versions, there's no reason why it can't support the required bands. ugh!
I have a D802 Hong Kong version. In the secret menu (3845#*802#) i have found this: LGD802AT-00-V10C-HKG-XX-NOV-30-2013
Now, I would like to use the 4g connection in my country (Italy, carrier TIM) but the 4g option is not avaible in "network mode". After a test with another G2 (italian version and same carrier), I can say that the connection don't switch automatically on 4g but keeps the H+ one. So i think is necessary a modification.
Solutions?
Is it necessary to flash an europe radio? or something else? I'd like to keep the stock rom Lg but is not a fundamental.
Baseband: M8974A - AAAANAZM - 1.0.190036
Kernel: 3.4.0
Build: JDQ39B
I have the g2 for two days. I know it very little. I do not have much knowledge about it. Some good soul can explain to me how to do?
I need your help!
Did you verify that the device has the correct radio bands for the lte on that carrier?
x714x said:
Did you verify that the device has the correct radio bands for the lte on that carrier?
Click to expand...
Click to collapse
I don't know how to check! On the box of g2: gsm 850/900/1800/1900; wcdma 850/900/1900/2100; LTE 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20).
My carrier is Tim but i don't kwow which band uses.
In secret menu/LTE Band section: avaible band 1,2,3,4,5,7,8,17,20,40. No one is selected.
Can i flash V10E firmware for Italy on V10C firmware for honk kong (actually on my device)?
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
x714x said:
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
Click to expand...
Click to collapse
maybe i should enable "band 3" in LTE setting in secret menu.
Hi,
I've a similar question and I hope someone could help me: I've a G2 phone using the D80210e-ESA-XX firmware.
In the product specifications, supported LTE frequency bands are 900/1800/2100/2600/850. I know that in Italy working frequency bands are 800/1800/2600. Now, my phone does not support 800 MHz: do you think is possible to upload a different firmware (IT or EUR ones) on my phone? With one of these firmware, does the device will work at 800 MHz?
Thank you so much.
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
madner81 said:
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
Click to expand...
Click to collapse
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Sent from my LG-D802 using Tapatalk
Does your country offer 4G networks? I'm in Kenya n any 4G device I ship in shows 4G even though we dont have it yet
Sent from my HTC One using XDA Premium 4 mobile app
popsi said:
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Click to expand...
Click to collapse
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
madner81 said:
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
Click to expand...
Click to collapse
My friend i don't really know where in this forum the instructions for flashing a new stock firmware are... (I am also new in this community)
And i flashed it with Greek instructions so my link won't help you and i don't want to post some link i haven't tested by myself...
Sorry i hope you can understand!
At moment i have no time, but if I would be you I would search in the G2 Section for instructions!
They must definitely be somewhere!
Did you subscribe for LTE with your carrier?
Sent from my LG-D802 using Tapatalk
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
madner81 said:
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
Click to expand...
Click to collapse
Hi,
the procedure using the secret menu definitively works on my D80210e-ESA-XX, but I need to re-select it after every reboot.
Does anybody know how to make it permanent or how to automate this selection on boot (maybe using Tasker or something similar)?
zacharias99 said:
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
Click to expand...
Click to collapse
by flash, did you mean flash kdz of different region?
gpkumaran said:
by flash, did you mean flash kdz of different region?
Click to expand...
Click to collapse
yes exactly!
I flashed the European .kdz file!
I have an international G2 D802.. We, in india have certain operators in Band 40 LTE.. Is it possible to activate Band 40 in D802 by flashing D802T kdz in D802??? Kindly Help..
Four things to note before proceeding...
1. This only works for users having vs985 model outside the US or not on verizon network.
2. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
3. May be you already know all the things in the post but it can be useful for beginners like me .
4. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
akki7636 said:
Three things to note before proceeding...
1. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
2. May be you already know all the things in the post but it can be useful for beginners like me .
3. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
Click to expand...
Click to collapse
Hi there, thanks for the info. What area are you in and where did you find what band you needed? I have tried numerous times with all the bootstacks and never had consistent 4G.
@mopartonyg
I'm in India and i just checked my career's website to know which band they are using. However in USA Verizon wireless uses Band12 as Primary Band and Band2 , Band4 as Secondary band to strengthen the signal in densely populated urban area. So if you are verizon user in USA band 12,4,2 must be activated. I can't say anything about consistency as it varies from place to place.
Actually Verizon uses band 13 for it's primary along with bands 4 and 2. Not having any luck getting data to work on Fulmics with this method. I select band 13 and band 4 (as band 2 is not in my area) yet even with that I still can't get data at all on Verizon with Fulmics.
same boat here... actually the only band I can get working is 4. I have to assume the design of the international rom with the band they are designed around, just don't play nice with our CDMA harware/modem partition. I would suspect that the international roms would require some engineering for them to really work properly. not sure if just porting them over and chaning settings is going to get the job done. perhaps someone more intelligent than I could share some light, but there certainly is a conflict with how these roms communicates across the CDMA bands in the US
Sent from my VS985 4G using XDA-Developers mobile app
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Oh... Glad to hear that buddy..
So i think my post is useful for only international users which are not on verizon wireless.
akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
A couple of good approaches to the issue. Although it needs to be noted 4G is directly related to the band on each carrier (VZW, TMO, etc) See Below
Carrier 4G LTE Bands Frequencies
Verizon Wireless 2, 4, 13 1900, 1700 f, 700 c
T-Mobile 2, 4, 12 1900, 1700 def, 700 a
Sprint 25, 26, 41 1900 g, 850, 2500
Europe 3, 7, 20 1800, 2600, 800
If a specific ROM cannot be set to the correct bands above, it would make sense to me that Verizon wouldn't work in Europe on a stock VZW ROM. It would not be able to use the channels in Europe.
And vice versa, that Verizon wouldn't work in the states on an international ROM in the US. Whether the Verizon SIM is blocking that band, or the design of the ROM, would be a better question for the developers.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Warid's approved devices will definitely work with Warid's LTE network. For our "Warid LTE Approved' devices please visit the "Warid's LTE devices" section. You can also purchase LTE devices that support 1800 MHz (FDD-LTE Bands 3) from other sources. However, Warid doesn't take responsibility for these devices if they do not work on Warid's LTE network http://www.waridtel.com/lte/faqs
So it makes sense that if BAND 3 works international (see above) that you get 4G
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
AngryManMLS said:
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
Click to expand...
Click to collapse
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
akki7636 said:
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
Click to expand...
Click to collapse
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
+1
AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
This is good to hear and I second that!
Looking forward to getting it fixed and use it as my daily driver. It would totally be worth a big donation, thanks to everyone working on making this available to so many.
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
b00ster23 said:
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
Click to expand...
Click to collapse
Cool buddy... I think our vs985 will be on 4g Speed very soon.
akki7636 said:
Cool buddy... I think our vs985 will be on 4g Speed very soon.
Click to expand...
Click to collapse
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 10b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 10b rom.
3. Wiped stock 10b and flashed the 10b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
netookska05 said:
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 12b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 12b rom.
3. Wiped stock 12b and flashed the 12b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
Click to expand...
Click to collapse
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
b00ster23 said:
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
Click to expand...
Click to collapse
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
netookska05 said:
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
Click to expand...
Click to collapse
So when you go into the About Phone>Network, does it say Verizon Wireless for the network?