[Q] Stuck in boot animation when loading ROMS [SOLVED] - Droid RAZR M Q&A, Help & Troubleshooting

Just purchased a Razr M coming up from a Droid X2. First thing I did was head over here to grab a ROM to escape the Verizon bloatware.
So here is where I'm at right now.
-Rooted with MotoFail2Go and replaced the SU & Superuser.apk since original program wasn't rooting
-Root confirmed with Root Checker
-Installed SafeStrap3 3.12 with elevated permissions.
-Installed recovery
-Rebooted into SS3, backed up current state as a CYA precaution and partitioned a ROM slot to test drive a ROM
-ROM (ECLIPSE) installs successfully, reboot system.
-Boot animation comes up for a bit and I figured ok I'll just let it do what it has to do to set itself up for the first time. 30 min and still stuck on boot animation
-Cleared partition and tried again and same result.
-Cleared and tried with a different ROM (BDH) and again same result.
Not finding any solutions online or users with similar experiences. Wondering if anybody had any input here.
*Edit- I just do want to note that it is a stock out of box device. Ive tried taking the updates before rooting but I get about 25% in and it fails.
**EDIT 2- Loaded the 4.1.1 update posted here that was failing. ROM booted up with no issues.

Related

[Q] Flashing 4.3plus then Freezing

My Tegra Note 7 came with Android 4.2. I unlocked, rooted, and installed CWM via the instructional videos over at rootjunky.com. Then through CWM I installed De-Odexed Stock Rooted 4.3plus from this thread: http://forum.xda-developers.com/showthread.php?t=2627671
Once the install finished and I rebooted the device (the reboot took maybe 30-45 seconds) I came to the setup "Welcome" screen. It is here that the Tegra Note froze. I thought it may be because it takes upwards of ten minutes for the first boot to complete/install but 30 minutes later the screen is still frozen.
When I do a hard reboot a few times I'm able to make it through the welcome and setup screens and the device appears to work just fine. I'll be able to install apps, run the stylus software, etc but then every 5 or 6 minutes (maybe shorter, maybe longer) the device freezes again and I must do another hard reboot. This happens repeatedly. And I still can't use the device for more than a few minutes.
Any ideas/suggestions?
onyxkhan said:
My Tegra Note 7 came with Android 4.2. I unlocked, rooted, and installed CWM via the instructional videos over at rootjunky.com. Then through CWM I installed De-Odexed Stock Rooted 4.3plus from this thread: http://forum.xda-developers.com/showthread.php?t=2627671
Once the install finished and I rebooted the device (the reboot took maybe 30-45 seconds) I came to the setup "Welcome" screen. It is here that the Tegra Note froze. I thought it may be because it takes upwards of ten minutes for the first boot to complete/install but 30 minutes later the screen is still frozen.
When I do a hard reboot a few times I'm able to make it through the welcome and setup screens and the device appears to work just fine. I'll be able to install apps, run the stylus software, etc but then every 5 or 6 minutes (maybe shorter, maybe longer) the device freezes again and I must do another hard reboot. This happens repeatedly. And I still can't use the device for more than a few minutes.
Any ideas/suggestions?
Click to expand...
Click to collapse
I am having the same issue my Tegra Note keeps freezing after flashing either update, I only did this because the ota update was not hitting but now the tablet is unusable
Fixed
RimanX said:
I am having the same issue my Tegra Note keeps freezing after flashing either update, I only did this because the ota update was not hitting but now the tablet is unusable
Click to expand...
Click to collapse
I was able to finally fix mine and stop the freezing and locking up. What I had to eventually do was reflash the stock 4.2.2 image, reflash the stock recovery and then update as usual OTA and now I have an updated EVGA TN7 fully functional. Thankfully this forum helped a lot by having the resources needed to fix the issue.
RimanX said:
I was able to finally fix mine and stop the freezing and locking up. What I had to eventually do was reflash the stock 4.2.2 image, reflash the stock recovery and then update as usual OTA and now I have an updated EVGA TN7 fully functional. Thankfully this forum helped a lot by having the resources needed to fix the issue.
Click to expand...
Click to collapse
How did you flash the 4.2.2 image and the stock recovery?
Freeje said:
How did you flash the 4.2.2 image and the stock recovery?
Click to expand...
Click to collapse
Have to get into the bootloader which for some reason mine is still just a blank black screen even though it says it's unlocked. I used a program called Quick Boot which is mentioned in one of the tut videos, it took a while because of the freezing but once I had it installed I used it to boot back into recovery and bootloader. I did this because the method of holding down power and vol up was not working.
I also noticed that as long as you are moving the screen around with your finger on any screen it would not lock up. I used this to transfer the stock image and recovery over from my computer using the usb.
Once in bootloader you use fastboot to flash. ex. fastboot flash recovery stock_recovery.img from the windows cmd prompt.
I had CWM recovery flashed when this first started so I used Quick Boot to go into recovery to flash the stock 4.2.2 image first to even see if it would help the freezing and once it did I went back and did the above to flash stock recovery so I could let the tablet update using OTA updates.
RimanX said:
Have to get into the bootloader which for some reason mine is still just a blank black screen even though it says it's unlocked. I used a program called Quick Boot which is mentioned in one of the tut videos, it took a while because of the freezing but once I had it installed I used it to boot back into recovery and bootloader. I did this because the method of holding down power and vol up was not working.
I also noticed that as long as you are moving the screen around with your finger on any screen it would not lock up. I used this to transfer the stock image and recovery over from my computer using the usb.
Once in bootloader you use fastboot to flash. ex. fastboot flash recovery stock_recovery.img from the windows cmd prompt.
I had CWM recovery flashed when this first started so I used Quick Boot to go into recovery to flash the stock 4.2.2 image first to even see if it would help the freezing and once it did I went back and did the above to flash stock recovery so I could let the tablet update using OTA updates.
Click to expand...
Click to collapse
From where did you get the 4.2.2 image that you can flash from stock recovery? I have a problem of getting the 4.3+ installed since I flashed the CWM recovery. I tried flashing a stock recovery but failed every time. My question is, would flashing an earlier ROM such 4.2.2 enable me to get the 4.3+ update or do I still have to flash a stock recovery?
Got the same error after flashing 4.3 or 4.4.2 manually (since OTA halts with an error).
How to get rid of it?
Thanks!
4.3/4.4 crash. I fixed mine finally! 4.4 working great, no crashing!
astuermer said:
Got the same error after flashing 4.3 or 4.4.2 manually (since OTA halts with an error).
How to get rid of it?
Thanks!
Click to expand...
Click to collapse
I had the exact same problem as you... I finally got it working, up to date with 4.4 CWM recovery, rooted and sd card fix. All working great... but here's some history...
I had the same bootloader that never worked from Power on/Vol Up, but would work after an adb reboot into fastboot. (blank screen only)
I was on stock 4.2.2, then unlocked bootloader, then updated to 4.4 using Supertool 2.2, Root, Sd card fix, but stock recovery still. All installed fine, but I had the crashing problem. Factory reset, and reinstall.. didn't solve the problem.
So I went back to 4.2.2 using the "temp" cwm recovery (using the root option to get in the cwm recovery, but I flashed the 4.2.2 file from root junky web page instead of rooting)
So here I was at 4.2.2 stock (from rootjunky web site), and stock recovery. Still not bootloader screen from Power.Vol up.
4.3 OTA would not work (dead droid with red triangle,error),
So I used supertool 1.5, installed CWM recovery, then I installed 4.3. It worked and rooted automatically, but I still got the crashing, and no bootloader by Power/VolUP. 4.4 OTA wouldn't work even when I put stock recovery back.
Here's where I got it to work from 4.3 stock (with crashing still happening, blank bootloader):
So now I used Supertool 2.2 to flash its version of CWM recovery (I had to keep touching the screen to keep it from crashing until CWM was installed and rebooted).
I did NOT use Supertool 2.2 to flash 4.4 as it contains the OTA 2.1 with it!!! (We don't want that yet! You'll se why below) I copied the 4.4 file at rootjunky: "Stock-4.4.2-TegraNote7.zip, February 22nd 2014 460 MB" onto the internal sd card (NOT the external sd card)
I used adb commands to reboot tablet into cwm recovery (had to keep touching screen until it rebooted into recovery so it wouldn't crash). Then I flashed the above 4.4 file. Install went fine. Of course I I still had crashing with 4.4 stock again. However, I noticed that the OTA 2.1 update appeared! I tried to update, but of course it wouldn't with CWM installed. So I reflashed recovery back to stock using supertool 2.2
Guess what happened next? The OTA 2.1 downloaded, flashed and worked! This was the first time I was ever able to get ANY OTA update to work! The key was to flash a stock 4.4 that didn't contain the OTA 2.1, and have stock recovery (from supertool 2.2) first in order to allow the OTA 2.1 to install!
Guess what works now? 4.4 works with NO CRASHING! and my bootloader finally works by holding Vol Up and Power ON and fully function menus,etc..!!! The tablet runs beautiful! The 4.4 had no root, or sd card fix applied, and stock recovery, but it DID lock the bootloader!
So now I used supertool 2.2 to unlock the bootloader (which I could now do because my bootloader had working menus, and could be accessed by Power/Vol Up). Keep in mind that this does a factory reset and wipes user data. (I had not wiped ANY user data right from 4.3 up until now!)
After the bootloader unlock/factory reset, I then used supertool 2.2 to: install CWM recovery, install root, install sd card fix.
Now I have an EVGA Tegra Note 7 with a fully functional bootloader, 4.4 Kit Kat, CWM recovery, root, sd card fix. All running great with NO crashing!
This is what worked for me... proceed with caution and know what your are doing first. Good luck!
4.4.2 Freezing- FIXED!
TerryRed said:
I had the exact same problem as you... I finally got it working, up to date with 4.4 CWM recovery, rooted and sd card fix. All working great... but here's some history...
I had the same bootloader that never worked from Power on/Vol Up, but would work after an adb reboot into fastboot. (blank screen only)
I was on stock 4.2.2, then unlocked bootloader, then updated to 4.4 using Supertool 2.2, Root, Sd card fix, but stock recovery still. All installed fine, but I had the crashing problem. Factory reset, and reinstall.. didn't solve the problem.
So I went back to 4.2.2 using the "temp" cwm recovery (using the root option to get in the cwm recovery, but I flashed the 4.2.2 file from root junky web page instead of rooting)
So here I was at 4.2.2 stock (from rootjunky web site), and stock recovery. Still not bootloader screen from Power.Vol up.
4.3 OTA would not work (dead droid with red triangle,error),
So I used supertool 1.5, installed CWM recovery, then I installed 4.3. It worked and rooted automatically, but I still got the crashing, and no bootloader by Power/VolUP. 4.4 OTA wouldn't work even when I put stock recovery back.
Here's where I got it to work from 4.3 stock (with crashing still happening, blank bootloader):
So now I used Supertool 2.2 to flash its version of CWM recovery (I had to keep touching the screen to keep it from crashing until CWM was installed and rebooted).
I did NOT use Supertool 2.2 to flash 4.4 as it contains the OTA 2.1 with it!!! (We don't want that yet! You'll se why below) I copied the 4.4 file at rootjunky: "Stock-4.4.2-TegraNote7.zip, February 22nd 2014 460 MB" onto the internal sd card (NOT the external sd card)
I used adb commands to reboot tablet into cwm recovery (had to keep touching screen until it rebooted into recovery so it wouldn't crash). Then I flashed the above 4.4 file. Install went fine. Of course I I still had crashing with 4.4 stock again. However, I noticed that the OTA 2.1 update appeared! I tried to update, but of course it wouldn't with CWM installed. So I reflashed recovery back to stock using supertool 2.2
Guess what happened next? The OTA 2.1 downloaded, flashed and worked! This was the first time I was ever able to get ANY OTA update to work! The key was to flash a stock 4.4 that didn't contain the OTA 2.1, and have stock recovery (from supertool 2.2) first in order to allow the OTA 2.1 to install!
Guess what works now? 4.4 works with NO CRASHING! and my bootloader finally works by holding Vol Up and Power ON and fully function menus,etc..!!! The tablet runs beautiful! The 4.4 had no root, or sd card fix applied, and stock recovery, but it DID lock the bootloader!
So now I used supertool 2.2 to unlock the bootloader (which I could now do because my bootloader had working menus, and could be accessed by Power/Vol Up). Keep in mind that this does a factory reset and wipes user data. (I had not wiped ANY user data right from 4.3 up until now!)
After the bootloader unlock/factory reset, I then used supertool 2.2 to: install CWM recovery, install root, install sd card fix.
Now I have an EVGA Tegra Note 7 with a fully functional bootloader, 4.4 Kit Kat, CWM recovery, root, sd card fix. All running great with NO crashing!
This is what worked for me... proceed with caution and know what your are doing first. Good luck!
Click to expand...
Click to collapse
@TerryRed:
You saved my bacon! I was having a similar issue with a totally borked root attempt... I was frustrated with repeated attempts to recover from the freezing issue. I followed your instructions and recovered the Tegra. Like you, I discovered that if I continually the device active by tapping and moving the screen, I could use the device. My idle limit was about 5 seconds, though.
In a nut shell, and while pretending to be a poor excuse for DJ 'scratching' (or do they call them 'controllerists' now?) I:
* Made sure ADB Debugging was enabled
* Copied the 'Stock-4.4.2-TegraNote7.zip' archive to the device's internal storage
* Ran SuperTool 2.2 and ONLY flashed the stock recovery
* Rebooted
[Resume silly DJ motions, while frantically setting up WIFI]
* Checked for, and downloaded the OTA update manually [OTA FOUND!!!]
* Waited the agonizing 10 second countdown for the device to initialize the installation
* Let Android do it's thing
!! SUCCESS !!
Thank you, and all of the guys here at XDA who donate their time, talent, and valuable info that help us mere muggles free our devices and take them to new heights.
I bricked my while trying to get back to 4.3 and I really hope that this will still help me after all I've already done. Wish me luck(
Bricked as well
OrangeCalculator said:
I bricked my while trying to get back to 4.3 and I really hope that this will still help me after all I've already done. Wish me luck(
Click to expand...
Click to collapse
So yours bricked as well???
I had the same problems:
- Bootloader not working as expected (only black screen).
- After CWM and flashed 4.3 constantly freezing.
- OTA not working (it said something like "This is not Tegra Note, it is Tegra Tab")
So being desperate I flashed a deodex 4.3 from RootJunky's web.
Since then tablet in boot-loop and still no way to get into Recovery.
I can only access APX mode, but I am not sure, how to use it.
Any help appreciated.
Jaro
NVflash unbricked
jardam.cz said:
So yours bricked as well???
I had the same problems:
- Bootloader not working as expected (only black screen).
- After CWM and flashed 4.3 constantly freezing.
- OTA not working (it said something like "This is not Tegra Note, it is Tegra Tab")
So being desperate I flashed a deodex 4.3 from RootJunky's web.
Since then tablet in boot-loop and still no way to get into Recovery.
I can only access APX mode, but I am not sure, how to use it.
Any help appreciated.
Jaro
Click to expand...
Click to collapse
So, to fix the boot loop it is as simple as it can be. I can't believe I didn't find that earlier. (BTW I didn't find a clear answer in the forum until today, thanks to hacktrix2006)
Just download the NVflash and the image mentioned in post #2 in following thread. Follow the instructions to switch tablet into APX mode, install the driver and start the flashing. Flawlessly done. No problem. Got rid of the Chinese OS (not supporting Google).
Really cool!
Just in case anyone still has these issues I'm going to post how I found a way to resolve them. I had all the problems mentioned in the previous posts and more besides. The inability to apply OTA updates, the device would freeze after 5 seconds of inactivity, endless boot loops, failed recovery partitions etc etc etc.
I tried a butt load of different solutions but none worked for me. What did work is described below. Others have already mentioned that Advent has a stock rom recovery utility, however, even after flashing that my problems still remained. So I downloaded the Advent stock recovery util and documentation and modified it slightly to the latest Android release for the Tegra Note 7.
Do as follows:
1 - Go here and download both the Advent Vega Tegra Note Factory Image (4.3) util and the documentation.
2 - Extract the Advent Factory Image zip file (as described in the documentation) somewhere on your pc.
3 - Inside the extracted folder you'll see a bunch of files. The three files we're interested in are the "recovery.img", "system.img" and "boot.img". Select all three and delete them.
4 - Now download the Tegra Super Tool utility here. At the time of this post the latest version is 2.5.
5 - Extract the downloaded Supertool to a new folder on your pc.
6 - Inside the extracted folder there are another bunch of files. Again, we're only interested in three of them. You're going to rename three of the files and use them to replace the three files you deleted earlier. At present their names are "4.4.2-2.5recovery.img", "4.4.2-2.5boot.img" and "4.4.2-2.5system.img.ext4". The filenames will obviously change as time goes by, but a little common sense goes a long way at this stage. So "4.4.2-2.5recovery.img" is renamed to "recovery.img", " 4.4.2-2.5boot.img" is renamed to "boot.img" and "4.4.2-2.5system.img.ext4" is renamed to "system.img". Once you've renamed them, copy them into the folder for the Advent Vega Tegra Note Factory Image which you extracted in step 2.
7 - Now go and read the documentation for the Advent Vega Tegra Note Factory Image util. Just take your time and follow it to the letter. It'll tell you how to put your Tegra Note 7 into it's APX mode, install windows drivers for it and begin the recovery of your device. It's mostly an automated procedure and fairly simple to follow as long as you follow the documentation.
This method brought my Tegra Note 7 back when it had several of the problems mentioned earlier in this thread, all at the same time.
Hope it helps someone.

[Q] Stuck on boot animation -- all ROMS

My Nexus 4 was previously running 4.4.2 ... I had a modified kernel patch (done via an app and I can't remember the name of it) and it was rooted. On occasion I would pickup the phone just to find out it had shut down. I would reboot it and it would be fine for days. One day it got stuck on the boot animation. It just wouldn't pass that point. Then the battery died (I assume) so I plugged it in via USB to both wall and PC and it would not charge. I had to put in on my wireless charging pad and it charged right up .. but still would not pass the animation.
Since then I have individually flashed each file manually from the newest lolipop ROM. Tried the nexus toolkit including most of the 4.X.X stock ROMS. Did a format and erase. Booted Clockwork Recovery and installed 5.0 from sdcard. (I can access the sdcard via USB on CWM). I flashed the kernel, Radio and bootloader several times each. I tried the Cyan ROM 10.x too
After the second attempt installing 5.0 (using the toolkit) I did get "Android is upgrading ... Optimizing apps" then it hung on "starting apps" and the animation continued for hours. I have had no other success since then.
I am at a complete loss. So I turn to the experts in hope of salvation.
Any idea what I'm doing wrong or what else I should be doing?
Your emmc chip is fried.. Take the phone to a service center
Sent from my Nexus 4 using XDA Free mobile app
http://forum.xda-developers.com/showthread.php?t=2964619
Well, here's a new twist. I'm able to flash 4.2 and 4.2.2 with no problems .. but 4.3 OTA and even manual flash will reproduce the stuck on animated logo problem.
I installed a sensor app and it seems like all sensors are working fine.
I remember that I was using the franco kernel before my problems started. Maybe I have a botched kernel. But I have flashed it when I did all the ROMs did I not?
What is the earliest kernel version that is compatible with 4.3, 4.4 and 5.0?
Does anyone know why I can't flash beyond 4.2.2?
Is there a way to systematically test each .img to discover the problem?
Also, even though I have USB debugging enabled, I can't use ADB to sideload at all. I keep getting ADB was not found. I can use ADB without problems on my nexus 5.
bump
Same issue here. Could flash 4.2.2 and update with ota to 4.4.4, after that the boot animation stay's for more then an hour. Any idea how to solve this?
Just to share my own experience on similar issue..
my N4 was official Lollipop 5.0.1 unrooted & locked.
Unlocked & installed clockworkmod & latest official pa rom -> stuck in boot screen. (had done all resets etc )
full wipe & latest official CM nightly -> stuck in boot screen.
full wipe & installed full official google 4.4.4 image -> phone booted ok.
full wipe & install cwm & latest official pa rom (same as earlier) -> phone booted ok.
So my conclusion was that it had something to do with lollipop modem etc part, that didnt quite work with roms i tried to run.
BTW for some reason wasnt able to get adb sideload to work for me neither, so installed the factory images on fastboot / flash-all.bat
If you have a backup with USB debugging enabled, you could restore it and try to take a logcat while booting. This would make finding the culprit a lot easier.

Unable to install custom ROM - reverts to stock

Hi all - Im hoping someone can help with what I suspect is an easy issue, and me just being a bit dense.
Note 4 N910F (international)
Today, I had the motherboard replaced after eMMC failure, phone wouldnt turn on. My phone went away with Kitkat, it's come back with Marshmallow.
Now would like to re-root and re-rom to how I had it.
I've TWRP'ed successfully.
I used CF Auto Root and it worked fine, then tried to install Super SU via recovery image zip file. It sometimes says that there is no binary installed when I'm back in the Android OS.
My ROM of choice is http://forum.xda-developers.com/note-4/snapdragon-dev/rom-n910f-stock-odexed-bloated-rom-v1-t3216390 as I have used this for the past year without any issues, and had it setup as I liked it (KitKat).
I use ODIN (with phone in download mode) and installed the bootloader and the modem, then restart the phone in recovery mode, and install the ROM tried both "Download v5 ROM" and "Full Un-Debloated Stock N910FXXU1DPE1 ROM (DeKNOXed, DeOdexed, Rooted)" which I have copied to my SD Card. Neither works, one ends up in German language phone setup.
/System /Data /Cache /DalvikCache /AndroidSecure is cleared.
Phone rebooted...
....ends up back with Marshmallow after 5 minutes at the animated "Samsung" screen.
Any ideas where Im going wrong, please?
So.. about me being dense..
Yeah - I've been installing a Marshmallow ROM, then getting confused why my phone was "reverting to stock" with a Marshmallow ROM.
Obviously, that WASN'T the ROM I've been using for the past year...
derp.

Trapped In Boot-loop, Help!

So, I will preface this post with: I am a noob. I am not very well-versed in technology or costumizing Stock OS, I can use a Stock OS on any Android phone, but as soon as anuthing resembling Coding comes into the picture I may as well be trying to learn how to operate Alien Technology.
So heres the problem: I tried to Factory reset my Samsung Galaxy J7, which had Developer options activated, OEM unlocked priopr to the Samsung Updcate that put Oreo 8.1 on it, so I did have an unlcoked Bootloader. My Boyfriend (Who very much enjoys tinkering with tech-stuff, nd is usually highly proficient at such endeavors) insisted I do some kind of backup, even though I had preveiously backed up everything to my Samsung cloud; I handed my phone over to him and when I got it back it was stuck in a Boot-loop, he said it was Softbricked. So, we did much research to try and get a custom ROM after installing TWRP 3.2.3-0. I decided on a Prometheus OS ROM, and downloded it aswell as the GApps for my phone (ARM+7.1 since the new ROM is a 7.1 OS). I folowed the instructions precisly; but even still it is in a Bootloop, and Idk what to do now, my Boyfriend says he needs to edit the coding on the OS ROM, but this Prometheus ROM is the first one out of countless that has made it past the attempt at installing (Usually I get to the point where I 'Swipe to install' then after a few seconds of instalation it reboots into TWRP as if I didnt do anything; or gives me an ERROR 6 or 7, but this time it says "Instalation compleate, Reboot now?") So, Idk how to fix it but I really really like my J7, and I want to fix it.
Device Specs:
Model: SM-J727R4 Galaxy J7 2017 LTE-A
Model#: j7poplteusc
Original OS: Oreo 8.1.0
CrookedYoungHeretic said:
So, I will preface this post with: I am a noob. I am not very well-versed in technology or costumizing Stock OS, I can use a Stock OS on any Android phone, but as soon as anuthing resembling Coding comes into the picture I may as well be trying to learn how to operate Alien Technology.
So heres the problem: I tried to Factory reset my Samsung Galaxy J7, which had Developer options activated, OEM unlocked priopr to the Samsung Updcate that put Oreo 8.1 on it, so I did have an unlcoked Bootloader. My Boyfriend (Who very much enjoys tinkering with tech-stuff, nd is usually highly proficient at such endeavors) insisted I do some kind of backup, even though I had preveiously backed up everything to my Samsung cloud; I handed my phone over to him and when I got it back it was stuck in a Boot-loop, he said it was Softbricked. So, we did much research to try and get a custom ROM after installing TWRP 3.2.3-0. I decided on a Prometheus OS ROM, and downloded it aswell as the GApps for my phone (ARM+7.1 since the new ROM is a 7.1 OS). I folowed the instructions precisly; but even still it is in a Bootloop, and Idk what to do now, my Boyfriend says he needs to edit the coding on the OS ROM, but this Prometheus ROM is the first one out of countless that has made it past the attempt at installing (Usually I get to the point where I 'Swipe to install' then after a few seconds of instalation it reboots into TWRP as if I didnt do anything; or gives me an ERROR 6 or 7, but this time it says "Instalation compleate, Reboot now?") So, Idk how to fix it but I really really like my J7, and I want to fix it.
Device Specs:
Model: SM-J727R4 Galaxy J7 2017 LTE-A
Model#: j7poplteusc
Original OS: Oreo 8.1.0
Click to expand...
Click to collapse
Reading that was a bit if an eye attack, one massive hard to read block of text.
To install a custom rom you need to first FORMAT (not wipe) in TWRP.
Then immediately after the install (assuming it installs correctly this time) you need to install Magisk.
ashyx said:
Reading that was a bit if an eye attack, one massive hard to read block of text.
To install a custom rom you need to first FORMAT (not wipe) in TWRP.
Then immediately after the install (assuming it installs correctly this time) you need to install Magisk.
Click to expand...
Click to collapse
Sorry for the text block, I was stressed lol But there was a misscommunication on my part tbh; in order the steps I took were
-Transer downloaded ROM to SD card from Computer'
-Boot into revovery via TWRP
-Format
-Install ROM
-Reboot
-Install GApps
-Wipe Davlik/cache
-Reboot
then, the screen turns on to the default "Samsung Galaxy J7" Bootload, flashes blue for a millesecond then goes dark, and then repeats for all of eternity. And about the Magisk; the ROM installer has an option to install Magisk or SuperSU ROOT, do I need to additionally add a Magisk file? i had checked the option for Magisk last I attempted to flash the ROM
CrookedYoungHeretic said:
-Transer downloaded ROM to SD card from Computer'
-Boot into revovery via TWRP
-Format
-Install ROM
-Reboot
-Install GApps
-Wipe Davlik/cache
-Reboot
Click to expand...
Click to collapse
Nope.
Format
Install rom
Do not reboot.
Install magisk v18 zip via twrp.
Reboot to android.

Boot loop after rooting with Magisk

I am puzzled by what's happening...
We got a new Moto G7 for my wife and following the instructions here https://www.the***********.com/install-twrp-root-moto-g7-plus-guide/, I successfully rooted the phone. However, there was a security update that needed to be installed, so with some great advice from ptn107, see https://forum.xda-developers.com/mo...-trying-to-t3977463/post80429619#post80429619, I flashed the updated ROM onto the phone. (Note that I omitted 'fastboot erase userdata'. Also note that the warning message 'is-logical:<partition>: not found' was seen for all flash commands.)
The phone booted properly after the update, so I then went through the exact same rooting steps that had worked previously. However, this time, the phone gets stuck in a boot loop. I reflashed the ROM and can boot successfully, but the phone is no longer rooted. (I have tried this twice, with Magisk 19.3 and 19.4 - same result.)
Any ideas as to what I may be doing incorrectly? More importantly, what is the best way forward?
Thanks.
im dealing with the same issue. you can flash TWRP and go to advanced, fix boot loop, and that should get it to boot, but then you lose Magisk. May be a verity / checksum issue with the stock ROM. probably an easy fix but I dont have it.
EDIT: also you can flash the stock boot.img back and that will do the same thing, but again you lose Magisk/Root.

Categories

Resources