Related
TGA_Gunnman created a one click root that new users will want to use, said thread is a sticky in Captivate Development. If you still want to use the old method (and install ADB) please use this one.
I followed my own guide! This works perfectly if you read everything and follow the instructions.
Also: once you are rooted, be EXTREMELY careful! Half of the new threads are people who have screwed up their phones by deleting this or corrupting that. Please, for the sanity of all of the devs and Android veterans, make backups and just be all around careful. Almost all problems that anyone has had are repareable AND PREVENTABLE with a little reading and care. Just to clarify, rooting does not automatically enable sideloading. Please follow http://forum.xda-developers.com/showthread.php?t=738376 to enable sideloading.
Follow these steps exactly and there will be no risk of bricking your Captivate, the worst that may happen is the phone rejecting the update.zip.
HOWEVER:
I take no responsibility if ANYTHING at all happens to your device that you don't like. Don't come crying to me if your brand new phone breaks in any way. Your warranty is also void, but you could have figured that out for yourself.
Now that that's over with, lets get to the fun bit. If you are on Windows, you can follow this procedure, or for TGA_Gunnman's one click root program (only on Windows), you can go ahead and skip to the bottom.
1) You may need Samsung drivers if you are on a PC, which you can learn about here: ADB Drivers at the Unlockr
For 64 bit Windows, you'll need these drivers: http://zedomax.com/blog/2010/07/14/s...iver-download/
Don't proceed until your phone is fully installed on Windows with the drivers!
2) Download the attached zip (at the bottom of the post) and rename it to update or update.zip if you are on a Mac. (If you are on a Mac, DO NOT USE SAFARI to download the file, it automatically unzips any zip file. Use Google Chrome or firefox instead.) Scroll down the notification bar and click "mount" to allow your computer to read the internal memory. Put the file on the INTERNAL SD card of the Captivate, which won't be tough to figure out if you don't have an SD card in the phone.
3) EDIT--There is an easier way to get to recovery, but do this step anyway. Turn the phone off, then hold power, volume up and volume down. If you still want the android SDK (which will be very useful throughout your rooted experiences) follow the old procedure:
This step requires the Android SDK, and Android Debugging enabled. You can get the SDK here: Android SDK. Just download the zip, extract it to something like C:\Android. You won't need the Java dev pack or anything.
You can enable Android Debugging like this: From the homescreen, press Menu, then click Settings. Navigate to Applications>Development and check USB Debugging. Now, hook the phone to the computer. Next,
On a PC, click start>run>"cmd" (in the text box) or on a Mac, spotlight "Terminal". Linux users, you know what to do.
The command you will use is in the tools folder of wherever you extracted it to (IE: C:\android\tools), so be sure your working directory of command prompt is in that tools location!
Finally, type:
Code:
adb reboot recovery
Click to expand...
Click to collapse
4) Once the phone is booted into recovery, use the volume keys on the phone to scroll to "Reinstall packages." Use power to select what you have highlighted.
5) Give yourself a pat on the back. You are now rooted. You should see a Superuser application now.
MD5 Sum: 1eb65923281c113e8751a7d8a6faff43
Can we please have more detailed instructions? I don't understand the part where it says "type in the terminal"
I am very new to android as this will be my first Android phone.
Also, after rooting will we be able to install 3rd party applications? Or do we have to do anything else to bypass ATT's restrictions?
adb terminal is software you need to install on your PC , will probably need samsung drivers also , guide is indeed not noob friendly. This will help you get needed bits including ADB
Probably None of us have captivate , so writing a guide is a bit troublesome
Ditto, a guide to the adb terminal please! I will acquire this phone, this Sunday.
Actually, you'd have to install a custom ROM for that. MoDaCo should be coming out with them pretty soon, and so will XDA. It won't be too long. BTW, once you have ADB installed on your computer, you can sideload apps all you want. The command is
Code:
adb install /directory/of/app/on/computer
point me to some functioning samsung drivers and I can do this!
If you cant get it to work on windows, try a ubuntu live cd. All you need to do is go to ubuntu and burn a disc and reboot.
Are there no Windows 64 bit drivers?
Edit- I found some that work. I think. Haven't tried it (yet).
http://zedomax.com/blog/2010/07/14/...ic-4g-and-fascinate-galaxy-s-driver-download/
Edit 2- Just did the root. Seems to have worked (no errors) but how do I know if it did? How do I delete say, ATT Maps?
Thanks for this. I am new to smartphones and plan on purchasing the Samsung Galaxy-S, but don't want to mess it up. I am new to editing the OS of any smartphone, but I think if I have a tutorial I will be fine
For Mac and Linux you put a ./ in front of the adb correct? (./adb install...)
NOSintake said:
For Mac and Linux you put a ./ in front of the adb correct? (./adb install...)
Click to expand...
Click to collapse
if you are in the directory above yes. the ./ just saves you from writing out the full path
lets say adb is in "/home/user/Downloads/sdk/tools"
you could type out "/home/user/Downloads/sdk/tools/adb command" regardless of where your terminal window was focused
or if you were currently in the directory "/home/user/Downloads/sdk/tools"
you could use the shortcut "./adb command"
OP I'd change your post based on my experiences... Here's a little more detail and I've rearranged it (you need the drivers before running these commands, for example).
blackjackboy said:
Please let me know if this rooting method works as I have no Captivate to test on. I'm not taking any credit for any of these files, LeshaK made the original file to root the European Galaxy S, Justadude modified it for the T-Mobile Vibrant and chaoscentral edited the file for use on the Captivate.
Follow these steps exactly and there will be no risk of bricking your Captivate, the worst that may happen is the phone rejecting the update.zip.
HOWEVER:
I take no responsibility if ANYTHING at all happens to your device that you don't like. Don't come crying to me if your brand new phone breaks in any way.
Now that that's over with, lets get to the fun bit.
1) You may need Samsung drivers if you are on a PC, which you can learn about here: ADB Drivers at the Unlockr
For 64 bit Windows, you'll need these drivers: http://zedomax.com/blog/2010/07/14/...ic-4g-and-fascinate-galaxy-s-driver-download/
Don't proceed until your phone is fully installed on Windows with the drivers!
2) Download the attached zip (at the bottom of the post) and rename it to update or update.zip if you are on a Mac. Scroll down the notification bar and click "mount" to allow your computer to read the internal memory. Put the file on the INTERNAL SD card of the Captivate, which won't be tough to figure out if you don't have an SD card in the phone.
3) This step requires the Android SDK, and Android Debugging enabled. You can get the SDK here: Android SDK. Just download the zip, extract it to something like C:\Android. You won't need the Java dev pack or anything.
You can enable Android Debugging like this: From the homescreen, press Menu, then click Settings. Navigate to Applications>Development and check USB Debugging. Now, hook the phone to the computer. Next,
On a PC, click start>run>"cmd" (in the text box) or on a Mac, spotlight "Terminal". Linux users, you know what to do.
The command you will use is in the tools folder of wherever you extracted it to (IE: C:\android\tools), so be sure your working directory of command prompt is in that tools location!
Finally, type:
Code:
adb reboot recovery
4) Once the phone is booted into recovery, use the volume keys on the phone to scroll to "Reinstall packages." Use power to select what you have highlighted.
5) Give yourself a pat on the back. You are now rooted. You should see a Superuser application now.
Thank you to LeshaK, Justadude, and chaoscentral. Once again, I didn't discover how to root, that credit goes to LeshaK, bringing it over to the USA was Justadude's doing, and chaoscentral edited the file for use on our Captivates.
MD5 Sum: 1eb65923281c113e8751a7d8a6faff43
Click to expand...
Click to collapse
Ubuntu 10.04 - adb
Any step by step instructions just to get adb running enough on 10.04 to root and side load software? I'm getting command not found when I try to run adb, even after downloading packages.
Hi,
Did this thread worked well to Root the Captivate or anyother suggested link? I'll appreciate any help.
Thanks
rerooting captivate
This worked perfectly on my Captivate. I now have the SuperUser Permission on my application screen. Now I can REALLY screw up my Captivate!!!
Thanks for the answer & More Queston
cellgeek said:
This worked perfectly on my Captivate. I now have the SuperUser Permission on my application screen. Now I can REALLY screw up my Captivate!!!
Click to expand...
Click to collapse
Hi,
Thanks for your helpful answer. As I'm getting my Cativate tomorrow, can you please just answer yes or no to each of my questions as follow ?
After Rooting will I be able to:
1- download any 3rd party Android application?
2- install any "Samsung Galaxy S" ROM on my Captivate?
3- Recieve any "OTA" update as a "Galaxy S" phone?
Thanks again
Muhamadabdelaall said:
Hi,
Thanks for your helpful answer. As I'm getting my Cativate tomorrow, can you please just answer yes or no to each of my questions as follow ?
After Rooting will I be able to:
1- download any 3rd party Android application?
2- install any "Samsung Galaxy S" ROM on my Captivate?
3- Recieve any "OTA" update as a "Galaxy S" phone?
Thanks again
Click to expand...
Click to collapse
1. No. You will have to use adb or the database modification method (which having root access makes possible). Both are described in detail elsewhere in this forum.
2. Rooting means simply getting superuser permissions. Loading a ROM has to do with the bootloader and recovery partition. Unmodded Galaxy S ROMs probably will not work on the Captivate, but be patient.
3. Not sure what you're asking. You will still get any Captivate OTA updates as if you hadn't rooted, but you won't get, for example, the rumored Korean FroYo Galaxy S update OTA when it drops. You'd have to wait for the Captivate OTA FroYo upgrade (or there may be a ROM or patch you can flash by then).
Rooting is basically just allowing programs to run as the superuser account. Many programs like Metamorph, some screenshot apps and some wifi tethering apps require more permission than Android normally gives an app.
Thanks Drachen
Drachen said:
1. No. You will have to use adb or the database modification method (which having root access makes possible). Both are described in detail elsewhere in this forum.
2. Rooting means simply getting superuser permissions. Loading a ROM has to do with the bootloader and recovery partition. Unmodded Galaxy S ROMs probably will not work on the Captivate, but be patient.
3. Not sure what you're asking. You will still get any Captivate OTA updates as if you hadn't rooted, but you won't get, for example, the rumored Korean FroYo Galaxy S update OTA when it drops. You'd have to wait for the Captivate OTA FroYo upgrade (or there may be a ROM or patch you can flash by then).
Rooting is basically just allowing programs to run as the superuser account. Many programs like Metamorph, some screenshot apps and some wifi tethering apps require more permission than Android normally gives an app.
Click to expand...
Click to collapse
Thanks alot for taking all this time & energy to reply to me! WOW, it seems like everytime I wanna step up one, I go back 10 steps. All I need is to use my Captivate for installing a Stock Rom of "Galaxy S" & be able to get rid of any "AT&T" restrictions for anything on this phone, what should I do please?
Thanks
Muhamadabdelaall said:
Thanks alot for taking all this time & energy to reply to me! WOW, it seems like everytime I wanna step up one, I go back 10 steps. All I need is to use my Captivate for installing a Stock Rom of "Galaxy S" & be able to get rid of any "AT&T" restrictions for anything on this phone, what should I do please?
Thanks
Click to expand...
Click to collapse
The ATT stuff doesn't actually run so they aren't a big deal at this point. I also don't see Amazon MP3 background stuff like some Android devices have, so... There's really not a huge case for rooting yet.
That said, when Custom ROMs for this come out I'll still be getting one.
For those of you having a hard time installing ADB Shell, try this video. It worked for me.
http://www.youtube.com/watch?v=YeWH6Bj1DYw&feature=related
Hey guys, I have good news for you all. I sat down these days and tried all kinds of exploits and one, normally for the Asus Transformer Prime really works!
Debugfs automated root from sparkym3 provided me full root access to my device. Its simple to use and does all stuff automatic
So it enables Users of the Lenovo ThinkPad Tablet to finally root their device, even if you had it updated to ICS. As you all know, this was not possible before, but after I ran through almost all exploits running anywhere for ICS, I found this one working like a charm.
Have fun!
WARNING!
If you dont know the slightest bit of Windows or Linux shell and never did more than USE the device, be warned... If you kill it, its dead!
emuandco said:
Hey guys, I have good news for you all. I sat down these days and tried all kinds of exploits and one, normally for the Asus Transformer Prime really works!
Click to expand...
Click to collapse
I confirm it works perfectly. ICS TPT _A400_03_0070_0132_US :good:
God, this is so wonderful. CWM works, Koshu's CM10 JB Firmware, too. I LOVE THE DEVICE AGAIN!
Great news! Who might have thought that a working exploit is already out there?
This is wonderful news, a friend of mine recently lost root after he had to send his TPT in for repair and got a new board already updated to ICS.
FANTASTIC - worked on UK running OTA 3.5
Booyah! Thanks Emuandco for your diligence!
Thank you. Had lost hope of root for ICS. My TPT may finally be the tablet I paid for.
22 hours and 5 badly needed factory resets were worth it ^^
Thanks a lot :good: :good: :good:
I just rooted my ThinkPad (WE version). Works like a charm.
emuandco said:
Hey guys, I have good news for you all. I sat down these days and tried all kinds of exploits and one, normally for the Asus Transformer Prime really works!
Debugfs automated root from sparkym3 provided me full root access to my device. Its simple to use and does all stuff automatic
So it enables Users of the Lenovo ThinkPad Tablet to finally root their device, even if you had it updated to ICS. As you all know, this was not possible before, but after I ran through almost all exploits running anywhere for ICS, I found this one working like a charm.
Have fun!
Click to expand...
Click to collapse
wonderful!!!
Thanks a lot!!!
Just tried and it worked!!!
after some trouble installing the adb drivers it worked fine on my WE tablet..finally, awesome, thanks
Amazing how much of a difference having root on this tablet makes.:good:
Stylus and Pressure Sensitivity
Been waiting a long time for this. I had one question that I can't seem to find the answer to. I use my TPT for sketching, allot, it's why I bought the tablet. I was wondering, if I root and then upgrade to Jelly Bean, will I lose stylus and pressure sensitivity?
Can someone post the steps to get this working starting from a clean OTA 4.0.3 rom? I just started messing with the TPT. What boot options are there? I see the hold-down-rotate-and-power boot which looks like what is needed for nvflash, but I can't seem to get any other bootloaders booting here. The debugfs script seems to want to talk to a recovery boot, yes? How do I boot into recovery mode?
Sorry for the TPT newbie questions. Is there a wiki someplace with all the boot modes and other info?
First, load this one: LINK
Its the Driver needed for the TPT to communicate with the PC over ADB protocol.
Go to your TPT Settings below inside Developer Options and check USB Debugging. Attach to your PC and hand the new unknown Device in Device manager the loaded ADB Driver. Then download and unzip everything from the Exploit into a directory; then run RootDebugfs.bat from that directory. This should do it for the rooting of the Stock Firmware. You can verify it by getting "Root Checker" from Play Store. If its green, next load this one: LINK and this one LINK. Its the ClockWorkMod aka modded Recovery Mode making it possible to flash unsigned Updates and making nice Full Backups and the JB Firmware itself.
Install this way from a windows console bein inside the folder where the adb.exe from the exploit is, Step one is making a backup of your previous Recovery Mode for future reverting if you want to do so. Step two is the actual install. You need to copy the loaded recovery.img from the CWM thread to the SD in your TPT, same goes for the JB ZIP File and maybe the 3G Patch for the 3G Card you might have.
BE SURE ALL FILES ARE COPIED ON THE SD AND ITS INSIDE THE TPT AGAIN!
Code:
adb shell
su
dd if=/dev/block/mmcblk0p1 of=/mnt/external_sd/orig_recovery.img
mount -o rw,remount /system
mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.backup
dd if=/mnt/external_sd/recovery.img of=/dev/block/mmcblk0p1
exit
exit
This should be enough. Now reboot and while the Lenovo mini Logo shows up, push Vol UP rapidly. This should boot up CWM6, our modded recover Mode. Here Vol UP is upwards, Vol DOWN is downwards and ON/OFF is Enter. First thing, DO A FULL BACKUP TO EXTERNAL SD in "backup and restore", "backup" !!! Then let it do a "wipe data/factory reset", then select "install zip from sdcard" and in there "choose zip from external sdcard". Choose the CM10 JB ZIP first, then the 3G Patch for your Card.
Reboot and youre done.
i have updated to the latest ota and i am not rooted.. A400_03_0070_0132_US
when i run it and choose option 1 the window automatically closes after like 2 seconds
am i supposed to use the asus drivers or what? if anyone can please help...
Somebody buy that man a beer.!!!!!!
Yankies77 - right click on RootDebugfs.bat and choose 'Run as Administrator'
You may get a different result.
pwstein said:
Yankies77 - right click on RootDebugfs.bat and choose 'Run as Administrator'
You may get a different result.
Click to expand...
Click to collapse
I have already tried that doesn't work. when in cmd i write adb devices it shows the device is connected
i have put it to transfer files and MTP settings with unknown sources and debugging on ..when i run the .bat file
after the *demon started successfully* it suddenly closes after which nothing happens..what do you think is wrong?
Open a CMD prompt and run the bat file from there. then show us the output of the script please.
AAND be sure that theres not any adb.exe coming from the system path variable, like in system32 or syswow64. kill these
I got a uk glow worm on the 27th (2 days before release ) and one of the first things that I tried to do was to root with glownooter. Bad idea! I thought that I had bricked my device. I had to use a lot of trickery to recover from a loading screen lock-up and once I did the first thing that I did was backup my nook (Which i should have done before).
UPDATE!
Please try my new ROOT install pack HERE:
http://forum.xda-developers.com/showthread.php?p=34216660#post34216660
This can be used to root and install the most requested things of this thread in just one zip.
Here is a quick guide to most things you will need to do to get started. I will update this guide as I discover and build new modifications.
To Backup and Restore
Follow this guide. Please do this BEFORE any other tinkering!
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
Its important to check your backup before proceeding! Please listen to roustabout and dont skip this step... He knows what he's talking about
roustabout said:
I'd like to suggest an addition to the backup method that many folks are using - always test your restore, but dont test it (the first time) on your device.
Your backup file should be about 2 gig.
find a 2 gig or larger flash drive or sdcard and restore your backup image to that drive.
when you're done, there should be 8 partitions, as there were on your Nook to begin with.
If you can't get that working - you're not ready to root yet. Until you're sure you can restore, don't start making changes, please.
People turn up all the time having screwed themselves over by restoring a partial backup and not knowing it, or having restored only one partition from a complete backup and having blown out the partition table.
Click to expand...
Click to collapse
Thanks roustabout
To Root!
Make sure you use the CWM file suitable for your SD Card. I used "2gb_clockwork-rc2" because my card was 2gb+.
http://forum.xda-developers.com/showthread.php?t=1360994 (Thanks mali100)
Use WinImage with admin rights to restore CWM virtual hdd image to your SD.
Download tinynoot-1-of-2 and tinynoot-2-of-2
http://forum.xda-developers.com/showthread.php?t=1650593 (Thanks to eded333 and roustabout)
Put on CWM boot SD.
Install them in CWM back to back (I didn't bother with the restart in the middle as it should not make a difference considering the file content). After a restart you should have root access and an android launcher on your 1.2.0 Nook (among other files). If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
To Add Apps
Using ADB to install apps is easy. Extract this to your C drive:
http://dl.dropbox.com/u/13673492/ADB + Fastboot + Drivers.zip
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Setup ADB over USB
OK I have taken the liberty of building a quick driver mod to support your nook through USB. It works for me. First you need to have the android SDK if you don't already (sure you do but just in case ).
http://developer.android.com/sdk/index.html
Make sure you tick to install the android USB driver when the SDK is installed.
Browse to extras\google\usb_driver in your SDK folder (wherever you put it) and replace android_winusb.inf with my file:
http://dl.dropbox.com/u/13673492/android_winusb.inf
Next go to C:\Users\your_user_account\.android and replace adb_usb.ini with my file:
http://dl.dropbox.com/u/13673492/adb_usb.ini
In device manager, point google ADB driver to this and hopefully that should get you set up!
To test type
Code:
adb devices
Its working if you get something like this:
Code:
* daemon not running. starting it now on port ____ *
* daemon started successfully *
List of devices attached
[YOUR NOOK] device
And then try
Code:
adb install app_of_your_choice.apk
UPDATE
Install Multitouch Kernel With Overclocking
Install the CWM zip using your clockworkmod SD card
http://forum.xda-developers.com/showthread.php?t=1906507
:good: Thanks to johnjtaylor for discovering that this kernel works works.
Hopefully this more comprehensive guide will get others with this software to start playing around.
If this helps, be polite and say thankyou
Have you setup ADB yet? If you can connect with ADB and get a shell, you can execute a 'df' at the shell prompt to see how much free space is available in each partition. On my NST (no glowlight) apps seem to be installed in /data/app so see how much free space is there. On the NST, this appears to be the same partition that books purchased from B&N are placed in, so if you have a lot of books from B&N, you may have to archive some to install apps. Of course all this is going on the assumption that the NST Glow is similar to the NST in this regard.
David0226 said:
Have you setup ADB yet? If you can connect with ADB and get a shell, you can execute a 'df' at the shell prompt to see how much free space is available in each partition. On my NST (no glowlight) apps seem to be installed in /data/app so see how much free space is there. On the NST, this appears to be the same partition that books purchased from B&N are placed in, so if you have a lot of books from B&N, you may have to archive some to install apps. Of course all this is going on the assumption that the NST Glow is similar to the NST in this regard.
Click to expand...
Click to collapse
Thanks for replying. I'm actually working setting up ADB now. As for books I only just got my nook so all of my titles are epub format on an sd card so i wouldn't think it would be that. As soon as I get ADB set up I will post back my results incase it helps anyone else with this new software version.
Can you look in the documentation that comes with the reader for any reference to 'third party software' or 'GPL software'. They should list where to download / apply for the source code somewhere. Once we can see the source code we can compare it against the existing versions and identify any significant issues.
I set up ADB.
Plenty of space in all partitions including /data for the apps that I want. Managed to install through "adb install some_app_i_want.apk" so problem resides with the amazon app store. Not really an issue for me because I have a specific set of apps that I want and don't need to browse the app store.
I will try to work out what's wrong for others.
staylo said:
Can you look in the documentation that comes with the reader for any reference to 'third party software' or 'GPL software'. They should list where to download / apply for the source code somewhere. Once we can see the source code we can compare it against the existing versions and identify any significant issues.
Click to expand...
Click to collapse
Thanks. I'm looking for it now
No reference to GPL. Only references to third party software are to tell me that my warranty is no longer valid (no surprise there!)
Is there any other place I can find this info thats not the documentation?
loney01843 said:
No reference to GPL. Only references to third party software are to tell me that my warranty is no longer valid (no surprise there!)
Is there any other place I can find this info thats not the documentation?
Click to expand...
Click to collapse
Nothing obvious from the uk.nook.com website. On the US site the 'support' section links to terms of service which contain the links to the open source code (see http://www.barnesandnoble.com/container/nook_lnav.asp?pid=43307 and search for NOOK 1.1.5 OSS Release ), but I can't see an equivalent on the UK site. It's an oversight, but such things happen with a new product launch.
You can email them at [email protected] . The relevant paragraph from the US site is:
1. Notwithstanding anything to the contrary in this Agreement, certain components of the Software are licensed subject to the General Public License Version 2.0, a copy of which is attached as Exhibit A (the "GPL License"). You may not use these components except in compliance with the GPL License. In addition, you may have additional rights with respect to such components under the GPL License, including, without limitation, the right to obtain the source code for such components from us. You may obtain a copy of such source code by contacting us through the contact information provided on the Web Site. We will provide such source code in accordance with the GPL License.
I don't legally have the right to request the source code myself, because I don't own a UK NOOK yet. (Yeah, thinly veiled excuse for laziness!)
staylo said:
Nothing obvious from the uk.nook.com website. On the US site the 'support' section links to terms of service which contain the links to the open source code (see http://www.barnesandnoble.com/container/nook_lnav.asp?pid=43307 and search for NOOK 1.1.5 OSS Release ), but I can't see an equivalent on the UK site. It's an oversight, but such things happen with a new product launch.
You can email them at [email protected] . The relevant paragraph from the US site is:
1. Notwithstanding anything to the contrary in this Agreement, certain components of the Software are licensed subject to the General Public License Version 2.0, a copy of which is attached as Exhibit A (the "GPL License"). You may not use these components except in compliance with the GPL License. In addition, you may have additional rights with respect to such components under the GPL License, including, without limitation, the right to obtain the source code for such components from us. You may obtain a copy of such source code by contacting us through the contact information provided on the Web Site. We will provide such source code in accordance with the GPL License.
I don't legally have the right to request the source code myself, because I don't own a UK NOOK yet. (Yeah, thinly veiled excuse for laziness!)
Click to expand...
Click to collapse
You're obviously not that lazy. Thanks for looking and gathering all of the extra info I need. I'll send B&N an e-mail and see what they say. I wouldn't be surprised if they didn't want to hand it out considering you can use it for an easy root setup and install the amazon and kobo stores which could financially damage their advance into new territories! What are we to do! Can't even subscribe to a newspaper or magazine through the nook store yet!
I'll let you know when / if I get a response
There is a setting in nook touch tools that you need to "arm," to allow software from unknown sources to be installed before the Amazon appstore can install software on a tinynooted device.
The setting is a tickbox, "Allow non-Market apps"
Untick it if it is ticked by default, then re-tick it to get apps to install.
roustabout said:
There is a setting in nook touch tools that you need to "arm," to allow software from unknown sources to be installed before the Amazon appstore can install software on a tinynooted device.
The setting is a tickbox, "Allow non-Market apps"
Untick it if it is ticked by default, then re-tick it to get apps to install.
Click to expand...
Click to collapse
Thanks for the reply but I actually tried that. No joy. However perhaps it is this that is not working and not amazon app store. Im just installing through ADB instead. I wonder if I can enable unknown sources through ADB. Something to look at I guess!
UK tinynoot attempt failing
loney01843 said:
Thanks for the reply but I actually tried that. No joy. However perhaps it is this that is not working and not amazon app store. Im just installing through ADB instead. I wonder if I can enable unknown sources through ADB. Something to look at I guess!
Click to expand...
Click to collapse
I tried using the tinynoot process from roustabout's thread here http://forum.xda-developers.com/showthread.php?t=1650593 and am stuck on the final reboot with a "Your NOOK is starting up..." message. Could you let me know if you used a different tinynoot method/set of files?
smerrett said:
I tried using the tinynoot process from roustabout's thread here http://forum.xda-developers.com/showthread.php?t=1650593 and am stuck on the final reboot with a "Your NOOK is starting up..." message. Could you let me know if you used a different tinynoot method/set of files?
Click to expand...
Click to collapse
Yep thats what I used. You on 1.2.0 and did you back up?
I didn't backup first and to get out of the starting message I used this:
http://forum.xda-developers.com/showthread.php?t=1289233&highlight=restore
Then I made a backup using this:
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
I hope this helps!
loney01843 said:
Yep thats what I used. You on 1.2.0 and did you back up?
I didn't backup first and to get out of the starting message I used this:
http://forum.xda-developers.com/showthread.php?t=1289233&highlight=restore
Then I made a backup using this:
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
I hope this helps!
Click to expand...
Click to collapse
Thanks for the tip on screen freeze but the link to the images on that post don't work for me. I am on 1.2 and made a backup before attempting any rooting - have managed to reinstate my original nook so quite pleased with myself.
Is there any point in rooting until someone can find a way of getting apps onto the 1.2 NSTG?
smerrett said:
Thanks for the tip on screen freeze but the link to the images on that post don't work for me. I am on 1.2 and made a backup before attempting any rooting - have managed to reinstate my original nook so quite pleased with myself.
Is there any point in rooting until someone can find a way of getting apps onto the 1.2 NSTG?
Click to expand...
Click to collapse
Great that you got a backup. If you want custom apps you can either wait for a different root kit or push ahead (since you have a safety net).
As I said, it worked for me.
If you don't mind searching for the .apk files you want you can use this:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
This has worked fine for me so far. Just don't try for custom kernels yet as they seem to give me troubles.
I will work more on this tomorrow including adjusting framework for gapps.
loney01843 said:
Great that you got a backup. If you want custom apps you can either wait for a different root kit or push ahead (since you have a safety net).
As I said, it worked for me.
If you don't mind searching for the .apk files you want you can use this:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
This has worked fine for me so far. Just don't try for custom kernels yet as they seem to give me troubles.
I will work more on this tomorrow including adjusting framework for gapps.
Click to expand...
Click to collapse
Thanks also for the code but as this is my first foray into rooting I think I'll hang around and watch for a bit! Perhaps if I start learning some more I may feel confident enough to try it.
Do you have copies of the files needed for the factory reset - the links are still not working for me.
Thanks again and sorry for bothering you. Hope tomorrow is productive for you.
smerrett said:
Thanks also for the code but as this is my first foray into rooting I think I'll hang around and watch for a bit! Perhaps if I start learning some more I may feel confident enough to try it.
Do you have copies of the files needed for the factory reset - the links are still not working for me.
Thanks again and sorry for bothering you. Hope tomorrow is productive for you.
Click to expand...
Click to collapse
http://dl.dropbox.com/u/13673492/n2T-Recovery_0.2.img
This is the file needed to force factory reset. However a quality backup like you have is far more important.
For anyone who wants to give this a go, here is a quick guide for root access and app installs using windows tools until I can make something more complete:
Make sure you use the CWM file suitable for your SD Card. I used "2gb_clockwork-rc2" because my card was 2gb+.
http://forum.xda-developers.com/showthread.php?t=1360994
(Thanks mali100)
Use WinImage with admin rights to restore CWM virtual hdd image to your SD.
Download tinynoot-1-of-2 and tinynoot-2-of-2
http://forum.xda-developers.com/showthread.php?t=1650593
(Thanks to eded333 and roustabout)
Put on CWM boot SD.
Install them in CWM back to back (I didn't bother with the restart in the middle as it should not make a difference considering the file content). After a restart you should have root access and an android launcher on your 1.2.0 Nook (among other files). If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
Using ADB to install apps is easy. Extract this to your C drive:
http://dl.dropbox.com/u/13673492/ADB + Fastboot + Drivers.zip
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Hopefully this more comprehensive guide will get others with this software to start playing around.
Click thanks if this guides helpful.
loney01843 said:
If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Hopefully this more comprehensive guide will get others with this software to start playing around.
Click thanks if this guides helpful.
Click to expand...
Click to collapse
Great - thanks to your more detailed instructions, I have persevered and the second attempt at installing the tinynoot zips worked. Your post gave me the confidence to try installing apks for the first time and for anyone else who is unfamiliar with the processes used, I found these two pages useful for:
navigating within a command prompt (how naive): pcstats.com/articleview.cfm?articleid=1723&page=3
Pasting text into a command prompt (ditto): megaleecher.net/Copy_Paste_Text_Dos_Window
Sorry, as a newb I'm not trusted to post outside links yet. It took a couple of attempts of pasting and pressing enter to work out how to install using the adb code but it's not as hard as I expected.
I have tried installing the 1 Mobile Market which works but it is unable to install apps itself (not enough space).
Also, I have just installed NoRefreshToggle and can't seem to get it to work. Any thoughts - is 1.2 to blame? Really want this to work as Business Calendar Free is just a series of blinks at the moment!
Great! I'm glad you pushed onward and have root.
I am going through possibilities of other ways to install apps and mods.
No refresh is something that I would like as well but I think that the framework may need editing for 1.2.0. For fast mode a new kernel will need to be made or existing one modified.
Be aware that installing kernels not designed for this firmware can give you some serious problems.
Once I can setup app markets, I will work on these other modifications.
Stay tuned :good:
Take a look at the overclock kernel - it's got a lot of the norefresh features baked in, and gives you a nice ability to control both clock and kernel tuning (via the governor control.)
You're right, you can flash the two zips back to back with no ill effect, I was mistaken about what the second zip was doing.
I mistyped when I typed "nook touch tools," I meant nook color tools.
I'm very interested that the amazon store is not working in 1.2. I will see if the software's available for my device, so I can try to see what's happened.
As of now, the us bn site does not mention an os 1.2 for the glowlight.
Today I decided to unleash my kfhd7 and install CyanogenMod.
After installing the 2nd Bootloader and the recovery, I 'accidentally' removed all my data in the hurry (anyway, I forgot to place the ROM on the SDCard folder before :silly. I was quite confident while doing this, based on my experience with other Android devices, I thought it would be easy to mount the SDCard folder to the computer using TWRP... But that wasn't the case. And my device was not recognize by ADB while in Recovery Mod.
After some research on the forum I noticed that the poor people who had this problem before had to reflash the stock image through the recovery. I used another method, mostly by finding a way to reinstall the drivers. So I decided to share my experience. I know that is maybe a bit noob, but I would enjoyed to find this tutorial while I was despaired and stuck on recovery mod.
Last precision : I am using Windows 8 (and I'm French, so pardon my French ).
What you need
ADB version 1.0.29 or higher you can find the version by typing "adb version" at the command terminal
Kindle Fire HD ADB drivers already installed, I guess it was the case if you were able to install the recovery. Other wise try to install it, you should find the the file executable easily on this forum.
The .zip file of whatever you want to flash, dont forget the gapps if you want to flash Cyanogen
That's all, no need of factory cable.
1. Install drivers
The first step is to reinstall the driver, considering the device was recognised before the flash but not anymore.
Open the Device Manager (hint: by typing directly devmgmt.msc)
You should see "Amazon Kindle Fire HD" under the "Other Devices"
Right click "update driver"
"Browse my computer for driver software"
"Let me pick from a list of device drivers on my computer"
"All devices" then next
At the bottom of the window you can choose a custom driver. Go this path:
C:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_048d6e54936abbc3
The last number might be different (or may not, in fact I have no idea).
And voilà!!
Now adb should work.
2. Use sideload
You can now push your .zip to the sdcard, but TWRP have a really useful and smart way to do it.
Go into the advanced option of ADB. The click ADB sideload and swipe to start.
Just type
Code:
adb sideload yourfile.zip
and it's done! Don't forget to repeat it for googleapps if you need it.
For some reasons I had an error from TWRP complaining that he didn't find any OS installed. It worked anyway for me.
Just wanted to say merci bc.
Running the stock rom (rooted + 2nd boot-loader) I´ve flashed the "1.4 GHz(try me first)" by Maromi.
I made a backup before of everything but unfortunately moved. the files to my PC.
With the result of stucking at the blue Kindle logo.
A fastboot cable has been ordered but didn´t arrived in time before the week-end.
Just like you I´ve looked around quite a long time, tried several options but then your thread was the only solution!
By your advice I´ve sideloaded the last 7.3.1 (provided by hashcode) flashed and voilà - my kindle´s back!!
thx again!
Mistaz said:
Just wanted to say merci bc.
Running the stock rom (rooted + 2nd boot-loader) I´ve flashed the "1.4 GHz(try me first)" by Maromi.
I made a backup before of everything but unfortunately moved. the files to my PC.
With the result of stucking at the blue Kindle logo.
A fastboot cable has been ordered but didn´t arrived in time before the week-end.
Just like you I´ve looked around quite a long time, tried several options but then your thread was the only solution!
By your advice I´ve sideloaded the last 7.3.1 (provided by hashcode) flashed and voilà - my kindle´s back!!
thx again!
Click to expand...
Click to collapse
I'm glad that it was useful to you
I was affraid that I was the only one "enthusiastic" enough to do the mistake. :laugh:
gornog said:
Today I decided to unleash my kfhd7 and install CyanogenMod.
After installing the 2nd Bootloader and the recovery, I 'accidentally' removed all my data in the hurry (anyway, I forgot to place the ROM on the SDCard folder before :silly. I was quite confident while doing this, based on my experience with other Android devices, I thought it would be easy to mount the SDCard folder to the computer using TWRP... But that wasn't the case. And my device was not recognize by ADB while in Recovery Mod.
After some research on the forum I noticed that the poor people who had this problem before had to reflash the stock image through the recovery. I used another method, mostly by finding a way to reinstall the drivers. So I decided to share my experience. I know that is maybe a bit noob, but I would enjoyed to find this tutorial while I was despaired and stuck on recovery mod.
Last precision : I am using Windows 8 (and I'm French, so pardon my French ).
What you need
ADB version 1.0.29 or higher you can find the version by typing "adb version" at the command terminal
Kindle Fire HD ADB drivers already installed, I guess it was the case if you were able to install the recovery
The .zip file of whatever you want to flash, dont forget the gapps if you want to flash Cyanogen
That's all, no need of factory cable.
1. Install drivers
The first step is to reinstall the driver, either the device was recognised before the flash.
Open the Device Manager (by typing directly devmgmt.msc)
You should see "Amazon Kindle Fire HD" under the "Other Devices"
Right click "update driver"
"Let me pick driver on my computer"
"choose in a list..."
"All devices" then next
At the bottom of the window you can choose a custom driver. Go this path:
C:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_048d6e54936abbc3
The last number might be different (or may not, in fact I have no idea).
And voilà!!
Now adb should work.
2. Use sideload
You can now push your .zip to the sdcard, but TWRP have a really useful and smart way to do it.
Go into the advanced option of ADB. The click ADB sideload and swipe to start.
Just type
Code:
adb sideload yourfile.zip
and it's done! Don't forget to repeat it for googleapps.
For some reason I had an error from TWRP complaining that he didn't find any OS installed. It worked anyway for me.
Click to expand...
Click to collapse
After following your steps I will get to the part where i have to click the last file for the drivers and after I do my computer will say that Windows was unable to find the drivers for the KFHD7, if you have any suggestions on what to do that would be greatly appreciated.
th3lawmak3r76 said:
After following your steps I will get to the part where i have to click the last file for the drivers and after I do my computer will say that Windows was unable to find the drivers for the KFHD7, if you have any suggestions on what to do that would be greatly appreciated.
Click to expand...
Click to collapse
Did ADB worked properly before, with drivers installed? If so you can try something else to reinstall it.
The first step are the same,
Right click "update driver"
"Browse my computer for driver software"
"Let me pick driver on my computer"
And try to find in the list if there is a "Kindle Fire" in the list of devices. You might be able to install it from here.
Otherwise try to reinstall the amazon adb driver (you can find it easily in this forum), and then eventually perform again the operation above.
Update software driver of Windows7 32 bit path :
C:\Windows\system32\driver\ android_winusb.inf
I've tried all your steps and plenty more all over this forum.. I can't figure out why my Kindle HD 8.9 wont connect properly so I could push the rom via ADB.. I basically fell through the same issue as you.. except I'm stuck at trying to get Windows to recognize the Kindle properly... This is what I get regardless of what driver, or .inf I push at it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/10postprereq
EDIT: I got it working, thank you very much for your post.. Helped a lot
gornog said:
2. Use sideload
You can now push your .zip to the sdcard, but TWRP have a really useful and smart way to do it.
Go into the advanced option of ADB. The click ADB sideload and swipe to start.
Just type
Code:
adb sideload yourfile.zip
and it's done! Don't forget to repeat it for googleapps if you need it.
For some reasons I had an error from TWRP complaining that he didn't find any OS installed. It worked anyway for me.
Click to expand...
Click to collapse
For some reason I cannot get this to work. I must not be typing the command language properly.
adb sideload cm-10.1xxxx
I get the following message:cannot read "sideload"
Any thoughts here? Thanks!!
krakora said:
For some reason I cannot get this to work. I must not be typing the command language properly.
adb sideload cm-10.1xxxx
I get the following message:cannot read "sideload"
Any thoughts here? Thanks!!
Click to expand...
Click to collapse
Make sure the ROM or file you're sideloading is in the same directory from which you are sending the command, or replace the filename with the exact full path to the file.
Success
soupmagnet said:
Make sure the ROM or file you're sideloading is in the same directory from which you are sending the command, or replace the filename with the exact full path to the file.
Click to expand...
Click to collapse
Thanks soupmagnet. Yes and Yes.
First: I did not have the Android SDK tools set up properly. I watched the interwebs and took some time to learn the very basic ADB commands. Once I changed directories to the desktop (where my zips were sitting) the simple sideload was a snap. I did get "error closed" message a couple times and used "adb usb" seemed to restart the process. At the end of day, success, my Kindle is flipping awesome now, I know a bit more about pushing files using ADB, and all is good in the world.
Thanks again XDA Developers!
PS: As a side note... I was on 7.4.3 version of the Amazon software and when I installed TWRP and the bootloader. Flash fire makes you switch to 7.2.3 version of the bootloader. I think that is what hosed me in the process... I could only get to recovery and it was like the OS was gone afterwards. Anyways, if you get trapped in recovery, get ready to learn something. :good:
I'm having trouble getting ADB to recognize the sideload command. I have found 2 different places that it is installed on my computer.
Do I use the ADB in the Android SDK, or the one in the Kindle Fire First Aide folder? When I try to open the one in the Android SDK folder the CMD Prompt pops up and flashes loads of text before auto closing, I get the same thing from the KF First Aide folder.
I just need to get my rom.zip onto my Kindle Fire HD, but I am totally lost on where to go from here since I am stuck on either the Boot screen or the TWRP bootloader.
Any help you can offer would be greatly appreciated.
ButchTheKitty said:
I'm having trouble getting ADB to recognize the sideload command. I have found 2 different places that it is installed on my computer.
Do I use the ADB in the Android SDK, or the one in the Kindle Fire First Aide folder? When I try to open the one in the Android SDK folder the CMD Prompt pops up and flashes loads of text before auto closing, I get the same thing from the KF First Aide folder.
I just need to get my rom.zip onto my Kindle Fire HD, but I am totally lost on where to go from here since I am stuck on either the Boot screen or the TWRP bootloader.
Any help you can offer would be greatly appreciated.
Click to expand...
Click to collapse
You don't run ADB like a standalone program. It's just a series of commands to be used from the command line. In order for this to work, the adb executable/binary/whatever must be in the same directory from which you are entering the commands (research the 'cd' command for more details).
Also, for the "sideload" command to work, your device must be booted into TWRP and you have to execute the sideload function from the "Advanced" menu.
soupmagnet said:
You don't run ADB like a standalone program. It's just a series of commands to be used from the command line. In order for this to work, the adb executable/binary/whatever must be in the same directory from which you are entering the commands (research the 'cd' command for more details).
Also, for the "sideload" command to work, your device must be booted into TWRP and you have to execute the sideload function from the "Advanced" menu.
Click to expand...
Click to collapse
Thanks for the quick reply, I decided to just re-flash to the stock 8.1.4 and restart the process, only this time I made sure to put the .zip folder for the new Rom on the systems storage first. Seems to be working so far, CyanogenMod is installing as I type this.
Thanks so much for working on this though, you guys do amazing work.
Dam thank you man
man with out this tread i would be F in a major way i have suceded in bricking two kindle fires hd 7 in the last week
one is compleatly dead dead dead waiting on factory cable. the other i was able to rescue today because of your post
(op) post,
i am not new to ADB, but the kffa, twrp,and other programs used to do these projects never seem to work, for me always stop at a bad time
. The thread installing twrp-2nd bootloader on this site has major flaws i am new to this so i chose 1st timer treads
(thing for dummies) things like step by step instructions, like i was able to follow your instructions easily (although you should have used an address like C;/desktop/xxxx.zip insted of (your zipfile) in the sideload code example. after i figerd out that deal it was easly done 5 min later loaded the code into adb ADB sideload C;/desktop/kfhd7-amizon-os-7.4.3.zip and 5 min after that my kindle rebooted and was back to normal all files intact even my apps. like i never touch a thing. it upgraded back to 7.4.6 and reloaded my apps.
I followed the instructions to a tee 2 times on the "root and recovery w/TWRP" tread and both times wound up having the programs kffa, and twrp, flashfile. stop at some point during the process, and result in me bricking.
i could have missed something or maybe the step by step missed a step or maybe my jdk was f but both time
i was screwed.
I think maybe they don't see the reader as a novice, although most if not all readers here are a novice's of some kind and so leave out info needed to complete with success, the tread i mention earlier he steered away from the topic so many times it made it almost impossible to follow and only refereed to successful outcomes, like put this into the cmd line next do this. but not stopping to think what if the person reading didnt get that response from the command line what do i do then?
And thats just what happen to me both times everything was going great and he said put this adb code in and i couldn't get it to respond like he said or it stoped cant find device or just sit there and do nothing, screwed... im into it now cant back up cant go forward your screwed. anyway my rant over now. THANKS FOR MAKING THIS TREAD you saved my ass.
thelz said:
man with out this tread i would be F in a major way i have suceded in bricking two kindle fires hd 7 in the last week
one is compleatly dead dead dead waiting on factory cable. the other i was able to rescue today because of your post
(op) post,
i am not new to ADB, but the kffa, twrp,and other programs used to do these projects never seem to work, for me always stop at a bad time
. The thread installing twrp-2nd bootloader on this site has major flaws i am new to this so i chose 1st timer treads
(thing for dummies) things like step by step instructions, like i was able to follow your instructions easily (although you should have used an address like C;/desktop/xxxx.zip insted of (your zipfile) in the sideload code example. after i figerd out that deal it was easly done 5 min later loaded the code into adb ADB sideload C;/desktop/kfhd7-amizon-os-7.4.3.zip and 5 min after that my kindle rebooted and was back to normal all files intact even my apps. like i never touch a thing. it upgraded back to 7.4.6 and reloaded my apps.
I followed the instructions to a tee 2 times on the "root and recovery w/TWRP" tread and both times wound up having the programs kffa, and twrp, flashfile. stop at some point during the process, and result in me bricking.
i could have missed something or maybe the step by step missed a step or maybe my jdk was f but both time
i was screwed.
I think maybe they don't see the reader as a novice, although most if not all readers here are a novice's of some kind and so leave out info needed to complete with success, the tread i mention earlier he steered away from the topic so many times it made it almost impossible to follow and only refereed to successful outcomes, like put this into the cmd line next do this. but not stopping to think what if the person reading didnt get that response from the command line what do i do then?
And thats just what happen to me both times everything was going great and he said put this adb code in and i couldn't get it to respond like he said or it stoped cant find device or just sit there and do nothing, screwed... im into it now cant back up cant go forward your screwed. anyway my rant over now. THANKS FOR MAKING THIS TREAD you saved my ass.
Click to expand...
Click to collapse
Which thread did you use to install TWRP?
>>Sent from my homebuilt TARDIS running Android 4.3... Or maybe it's a rooted Kindle Fire HD running ChameleonOS<<
Adb sideload not working
Hi guys, i need your help please! I am at the twrp menu trying to open adb sideload and it says"starting adb sideload feature..." but it stays like that for ages. Any idea??
guidomagaldi said:
Hi guys, i need your help please! I am at the twrp menu trying to open adb sideload and it says"starting adb sideload feature..." but it stays like that for ages. Any idea??
Click to expand...
Click to collapse
Stunts has a nice write up on this exact thing here http://forum.xda-developers.com/showthread.php?t=2459498
LinearEquation said:
Stunts has a nice write up on this exact thing here http://forum.xda-developers.com/showthread.php?t=2459498
Click to expand...
Click to collapse
thanks! its working!
guidomagaldi said:
thanks! its working!
Click to expand...
Click to collapse
You're welcome. Stunts did the write up, I just laid it out for you to play out.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Help please
gornog said:
Today I decided to unleash my kfhd7 and install CyanogenMod.
After installing the 2nd Bootloader and the recovery, I 'accidentally' removed all my data in the hurry (anyway, I forgot to place the ROM on the SDCard folder before :silly. I was quite confident while doing this, based on my experience with other Android devices, I thought it would be easy to mount the SDCard folder to the computer using TWRP... But that wasn't the case. And my device was not recognize by ADB while in Recovery Mod.
After some research on the forum I noticed that the poor people who had this problem before had to reflash the stock image through the recovery. I used another method, mostly by finding a way to reinstall the drivers. So I decided to share my experience. I know that is maybe a bit noob, but I would enjoyed to find this tutorial while I was despaired and stuck on recovery mod.
Last precision : I am using Windows 8 (and I'm French, so pardon my French ).
What you need
ADB version 1.0.29 or higher you can find the version by typing "adb version" at the command terminal
Kindle Fire HD ADB drivers already installed, I guess it was the case if you were able to install the recovery. Other wise try to install it, you should find the the file executable easily on this forum.
The .zip file of whatever you want to flash, dont forget the gapps if you want to flash Cyanogen
That's all, no need of factory cable.
1. Install drivers
The first step is to reinstall the driver, considering the device was recognised before the flash but not anymore.
Open the Device Manager (hint: by typing directly devmgmt.msc)
You should see "Amazon Kindle Fire HD" under the "Other Devices"
Right click "update driver"
"Browse my computer for driver software"
"Let me pick from a list of device drivers on my computer"
"All devices" then next
At the bottom of the window you can choose a custom driver. Go this path:
C:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_048d6e54936abbc3
The last number might be different (or may not, in fact I have no idea).
And voilà!!
Now adb should work.
2. Use sideload
You can now push your .zip to the sdcard, but TWRP have a really useful and smart way to do it.
Go into the advanced option of ADB. The click ADB sideload and swipe to start.
Just type
Code:
adb sideload yourfile.zip
and it's done! Don't forget to repeat it for googleapps if you need it.
For some reasons I had an error from TWRP complaining that he didn't find any OS installed. It worked anyway for me.
Click to expand...
Click to collapse
Hey please help me I have donwloaded amazon kindle fire but it doesn't displays in my device manager furthermore in my computer I cant find driver software but yes in program files i do have amazon kindle folder, what should I do please help
Hello all ...
Please .. I need some advice..
This is my first post. My sister has given me her Nook Simple Touch Glowlight. I would like to root it, as I've been looking for a device to keep notes and stuff on. I went as far as booting up with noogie.img and backing up the firmware. I don't know what to do, because I read that having a certain firmware changes everything? I don't think my sister updated the nook. Here is the information from the Settings / Device Info / About Your Nook.
Software Version: 1. 1. 5
Model Number: BNRV350
I read someplace that the sizes of the firmwares are different. The simple touch is 1. 82 and the simple touch glow is 1. 86.
Mine is 1 .82, but yet it has the glowlight? It says to hold the button down for two seconds to turn it on.
I see that B&N have new firmware for the nst & nstg. 1. 3 I believe. It said on the site that this firmware would be installed when the nook is idle. (via wifi) Anyway, I'm wondering if it would be ok to go ahead and root the thing, or upgrade the firmware first to maybe - 1. 2 (if I can find it?) before I do anything else? Oh and should I stay away from B&N's new 1. 3 firmware?
Thank You Very Much !!
WillyS.......
If you indeed have the Nook Simple Touch with Glowlight (black bezel), then the most recent stock firmware is 1.2.1 which can be downloaded here. I would recommend that you update to this as the first thing you do. Next you need to decide which of the multitude of rooting methods is best for you. You need to take into account what you wish to achieve by rooting the Nook and your skill/comfort level with the processes. I have followed many of the different processes, doing a factory reset between root versions. By far the easiest is Nook Manager. I, personally, prefer the Minimal rooting - back to basics method because it allows you to install just what YOU want. However, this method requires a fair amount of command line work.
EDIT: I made the assumption that you are in the US and have a US model. I believe there is a different firmware number for the international model. In any case, you should update the Nook to the most recent firmware before rooting.
Rooting nook .. Glowlight ..
Hello David and Thank You kindly for the reply!
Yes, mine is a Canadian version and it has the black bezel.
Thank you .. for correcting me on the firmware. I was looking at the wrong Nook version. (nook.barnesandnoble.com/u/software-updates-nook-glowlight/379004086)
I downloaded the correct 1. 2. firmware for the nook and I (like you) would rather install what I want to and have more control over what gets put on it. After I update the firmware, I'll come back and follow the links you provided. If you know what threads have the latest / newest info on rooting the nstg, can you please point me to it? (If you haven't already) Thank You Very Much for your help .. David.
Cheers
WS
You're welcome. If you are comfortable with a lot of manual, command line manipulation, start with the Minimal rooting - back to basics thread. There are many more and newer rooting methods, but each of them installs a bunch of apps that the creators use, which may or may not be of importance to you. If you start with the Minimal rooting - back to basics, you can then pick and choose the apps and modifications you want to apply to give you the best experience for YOUR needs. I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Rooting Nook STG .. Firmware 1. 2 ...
Hi David and Thank You for the reference document.
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
I'm at the rooting - back to basics thread. I'm going to read all this stuff over and see if I can figure it all out. Thanks again for your help and the document.
WS...
WillySizard said:
...
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
...
Click to expand...
Click to collapse
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Don't really know where to go from here, or what to do ..
@ digixmax .. Thank You for the info on the SD-card. Good to know info!
@ david0226 .. I went to the page about rooting via the link and I have basic
understanding how / what needs to be done, but I'm not having much
luck finding and using the tools. I went and looked for the file used to
extract the 2 files from uRamdisk, but I couldn't find it. I did some reading
and looking around and found a program called Preboot (I think) by
Intel and it contained bootutil 32/64 and so on. I had to install preboot & then
uninstall it, to get bootutil and then install it. I tried using it to extract
the files, but I kept getting failed messages. Like invalid switch /x.
Invalid switch /v. Invalid file uRamdisk. I know I need to extract out 2
files: init.rc and default.prop. I tried to do so in the "Administrative Command
Window" on Win7_64bit, but it just wouldn't work with bootutil. Not the
one I had anyway. Any ideas? Thanks!
WillyS......
David0226 said:
...
I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Click to expand...
Click to collapse
What extensions does "Extended Power Menu" provide?
Also, which uImage and uRamdisk do you use as uRecImg and uRecRAM?
TIA.
Here are the links to the relevant threads.
Extended Power Menu
Clockworkmod based Recovery post #75, see the entire thread here.
If you are going to do the Extended Power Menu, be sure to do the Clockworkmod based Recovery also or you risk wiping out everything you have done by accidentally hitting recovery in the Extended Power Menu. I you have installed Clockworkmod Recovery and accidentally hit "Recovery", it will just boot to Clockworkmod and give you a chance to back out.
@willys. I will have to look up the software I use and post tomorrow. Sorry I missed your question earlier.
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
David0226 said:
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
Click to expand...
Click to collapse
Yes, I had to go to her profile and I found it there. I'll do this part first and see how it goes. After that (I think?) I need to get an android program (some kind of Installer maybe?) to do some other work with. Anyway, one step at a time. All for now. Thanks! ... WS.
digixmax said:
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Click to expand...
Click to collapse
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Almost done, but need a little more help . . .
Mnurlan said:
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Click to expand...
Click to collapse
OK .. Thank You Mnurlan!
@David0226 ...
Just getting to the point where I'm ready to add programs. have edited uRamdisk and re-installed the two files. I've download android-sdk package and have installed it. I have been in the nook via wifi using ndb shell as root. I am now following your notes file. I've created the archive folder on the nook - /system/archive and I've been moving files over from /system/apps folder. I got Nook Manager written to the sd-card and I have PackageInstaller.adk from it, but I I'm not sure how I get that onto the nook. When I boot with NookManager, it ask if I want to root. I have already done that and it is working. Should I let it do it anyway?
Thank You!
WillySizard . . . .
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Nook Simple Touch Glowlight .. Need advice before rooting ..
David0226 said:
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Click to expand...
Click to collapse
Ahhh .. ok. Good enough then. That should get me off and running.
Thank You .. David. Sorry I'm being such a pest.
Me, also
Just paid $5 for a BNRV350 at a rummage sale.
I understand BN disabled the web browser with the current operating system.
I can get a Google search window (by repeated tapping on the "Google" or maybe the "404" or the "that's all" links that appear when I try the "connect to social" settings menu choice for Google. And "find my account" worked when given the Gmail userid (because the keypad on the Nook lacks a period for typing a proper email address, in this view).
And I can get a Twitter login page. Neither works well -- typing even a single letter into the password field resets the page, so it's letter, then tap in the field window, then another letter, then tap in the field window. Sometimes it shows a row of dots for characters already entered, other times those are invisible but the entries are still there.
Just curious to add to the above fellow's thread for anyone searching for this Nook model number, if anyone has advice or suggestions about making it useful.
Reverting to the original OS to have use of the web browser would be a welcome option, if that's possible. Pointers welcome. Right now this Nook has version 1.1.5 installed -- I gather that's one of the improved versions that killed the stock web browser.