Related
I decided to round up all of the cases for the HTC Universal for reference:
Piel Frama (1 case... also available on Expansys as the "Chairmans Case")
- http://www.pielframa.com/imate_jasjar.htm
PDair (2 cases, both with belt clips)
- http://www.mobilefun.co.uk/product/7749.htm
- http://www.pdair.com/scripts/main/viewitem.php?itemid=1998&pdaid=190
XaX (2 cases)
- http://www.expansys-usa.com/product.asp?code=125516
- http://www.expansys-usa.com/product.asp?code=125869
- Nutshell
http://www.tuff-as-nuts.com/209-210.html#
I have ordered the XaX cases with the intention of sending one back... I will post a full analysis with lots of pics.... it's sad that there are not a lot of pics around of these two !
BTW, here's a nice review of the Proporta case...
http://www.clieuk.co.uk/execbookcase.htm
Thanks for the summary - very useful indeed. I'm looking for something like the Piel Frama or Xax (2) case but the keyboard must NOT be covered - which I believe it is with both of these, although it is hard to tell from the photos.
I have found another case by Krusell which looks quite good:
http://www.krusell.se/product.php?s=2&product=2095
Sold here:
http://www.expansys.com/product.asp?code=127398&asource=119353
Anyone got one?
Mods:
Should this be in accessories ?
Sorry...
@page 3:
Wow... the Krusell one looks pretty good !
Hole for ear... belt clip... window for screen... Hmmmmm.... !
The only thing its missing is elastic stretchy sides to block the SD card from falling out while still being able to open the case.
case
i like the krussel or the xax #1.
am interested in feedback on the xax, as I really just want something simple to make the carrying of it easier. if I need it, i just want to take it out of the case entirely, then when finished put it back. most cases are designed to keep it inside the case. i think the clam design prevents the need for a protective permanent case, so something to make it easier to carry it would be handy.
But yes, the krussel looks good if I felt it needed protection...
So any feedback on the Xax 1 would be good, and if any body does by the krussel, let us know.
Re: case
simon_darley said:
...any feedback on the Xax 1 would be good...
Click to expand...
Click to collapse
I've had the XAX 1 for about a week now and it's just what I was looking for. Like you, Simon, I was also interested in just something to carry the Universal as I prefer to take it out completely to use it. The XAX 1 certainly does the job.
The magnetic closures make it very easy to take it out of the case and put it away. The fit is not too tight to make it difficult to remove and replace but tight enough to feel secure. It's not going anywhere. And it may seem a small thing, but I also like that the magnets make the removal and replacement of the Universal into a silent operation without zipping or velcro or snaps to announce what you're doing. It's not a big deal, but it was a nice little bonus.
The concern I had with this case was the belt clip since it is an actual clip and not anything that locks in place. My previous "belt" cases with other PDAs had the locking type clips. This one just hooks on to the belt, but it feels very secure. There seems to be no question of it slipping off of a belt and I've even used it just hooked on to jeans (without them falling down, despite the Universal's weight!) when not wearing a belt. I can see where there is more of a chance that it could come unhooked when just on jeans like that, but I haven't had that happen yet.
One advantage to the locking clips was the ability to allow the case to swivel which this one does not have. After using it though, I like the horizontal orientation and now prefer that it doesn't swivel actually. I don't have to take the case off or swivel it around every time I sit down.
I'm planning to eventually get the PDAir (most likely) for times when I want the Universal protected even while in use, but I would only use that in certain environments where I was worried that it might get damaged if taken out completely. Most of the time I plan to use the Xax.
I am not sure I get how the Xax 1 works.
Is it like a holtster, where you just slide the JasJar in?
What is the magnetic closure for, is that a tab that closes over the top opening?
How are the sides protected?
Care to post some pictures?
I'm at work, so I can't post any pictures right now (they probably wouldn't be all that happy that I was positng in the first place, but hey, it's lunch!)
It is like a holster and the JJ just slides in. As you suspected there is a leather tab that goes over the top to help protect and hold it in (though the fit is tight enough that I don't think holding the JJ in is really all that necessary.) It doesn't go completely across the top, but leaves room on one end so that you can use the headphone jack while it's in the case (as long as you put the JJ in it with the camera facing out.) Beyond that, the top is protected. There is leather on both sides, so they are protected as well. On the bottom, there's a large cut out in the middle that allows you to push up on the JJ to take it out more easily as well as two other small cut outs for the speakers.
I'll try to see if I can get some pics together later tonight.
Hi everyone,
I got the XaX #2 case today (the magnetic snap one, NOT the belt clip) and well... it's not that great.
First of all, the Jasjar won't fully close when it's inside... the leather strip that holds down the keyboard gets in the way of the screen. I've tried a bunch of different positions, and no dice.
Also, the camera hole is uncovered, but the earpiece is not so you can't use the phone when the case is closed.
The magnetic snap is nice and strong though, and the leather is of good quality.
However, in terms of functionality, it's not that great. I'll post pics later.
ikaris said:
...the Jasjar won't fully close when it's inside...
Click to expand...
Click to collapse
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Same here. I am interested in the Piel Frama case or the Krusell. Both look pretty nice and seem to have the proper cut outs for all buttons and such. Just wondering which one seems to fit the device better.
I am currently using the case that came with the iPaq 5500 series. This fits the XDA Exec perfectly and is ideal if you want to use the case for storing the Exec and taking it out of the case for use.
Simon
kelford said:
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Click to expand...
Click to collapse
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Thanks for giving an update! That's good news that the Piel Frama doesn't have the closing issues that was found with the XaX 2 case. I know how well PF cases are made, so I may have to get one of these (or at least put it on a gift wish list!) since I find I like to use different cases depending on circumstances.
How does it feel in terms of added bulk? It seems designed to be on the device most if not all of the time, so I wondered how it really feels when used every day?
Take a look at this one: http://www.mobilefun.co.uk/product/7866.htm
seems reasonalbly priced
One thing though..........
Click on larger image.
first pic you see is the belt clip side
click the next pic and where you would expect to see the closing flap thingy, you see a plain flat side!?!?
Am I missing something?
Codiac said:
Am I missing something?
Click to expand...
Click to collapse
I don't understand that either. Where did the flap go?
I'm supposed to be getting pictures together (having regular PC issues at home) so I can show the XaX 1 in use, but the general construction looks similar to the one in the link, but the XaX has a bigger flap. And it doesn't hide anywhere either!
page3 said:
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
Click to expand...
Click to collapse
Yes, it is not covered by any plastic.
The case does make it feel more 'bulky'. In the daily usage you could leave the it in case without the need of taking it out. I can answer the phone by not having to open the case. Of course you do need to open it to be able to make a phone call.
Well, i have send a mail to Piel Frama, i was wondering of they are also
making a perfect in leader build case for the Ameo or HTC, i got a nice
reply returned.
So let's wait for the good news
Dear Tidde,
First of all I would like to thank you very much for your interest in our
products.
Regarding your question, we have to inform you that we have just received a
device for this model, and we have just started the manufacturing of the
first sample case for this device, so, we will have cases available for this
model in about 15 days. Don’t hesitate that we will put in contact you as
soon as we have the first sample case finished.
Please feel free to contact us for everything you need from us.
Very best regards and have a nice week!!
Rubén Montero
Export Manager.
Http://www.pielframa.com
Nice. I also emailed Ruben yesterday asking the same question.
Maybe we should use this time to provide this vendor with some input. Request things we would like to see in an Athena case by compiling a list from interested members then send this to Ruben. What do you guys think about the idea?
ltxda said:
Nice. I also emailed Ruben yesterday asking the same question.
Maybe we should use this time to provide this vendor with some input. Request things we would like to see in an Athena case by compiling a list from interested members then send this to Ruben. What do you guys think about the idea?
Click to expand...
Click to collapse
Great idea.
First request has to be - magnets to hold the keyboard in the case, and not a nasty plastic sheath like on the otherwise excellent PDair case.
Belt clip...suggestions to Piel Frama.
Of course, we must have a belt clip.
No plastic cover for the screen please. I haven't had a case that has plastic for the screen that I've liked. I always ended up cutting out the plastic. I like using the screen protectors better and allows you to actually tap the screen without issues.
Place a plastic see through "window" on the case to be able to view the "status bar" when the phone is "closed". I would like to be able to see this area when having the phone closed while in its case.
Mesh covering on the speakers. I don't like to cover the speakers at all but would like a mesh covering to protect it without hindering the sound.
If I think of more items I'll post them.
Edit #1: No flap (closing snap or whatever it's called) on the case please. As with the original case, this isn't needed and I see most others have this. It just gets in the way and is annoying and not necessary for this phone.
Edit #2: Maybe a plastic insert for the clear plastic end of the keyboard to avoid scratches on the device. This is a bit stretching it but I'm posting the recommendation anyhow.
ltxda said:
Of course, we must have a belt clip.
No plastic cover for the screen please. I haven't had a case that has plastic for the screen that I've liked. I always ended up cutting out the plastic. I like using the screen protectors better and allows you to actually tap the screen without issues.
Place a plastic see through "window" on the case to be able to view the "status bar" when the phone is "closed". I would like to be able to see this area when having the phone closed while in its case.
Mesh covering on the speakers. I don't like to cover the speakers at all but would like a mesh covering to protect it without hindering the sound.
If I think of more items I'll post them.
Edit #1: No flap on the case please. As with the original case, this isn't needed and I see most others have this. It just gets in the way and is annoying and not necessary for this phone.
Click to expand...
Click to collapse
personally, i think most of the Athena owner won't really want belt clip, it's too heavy and big to use it that way, and also most importantly, there is just no suitable place to allocate the belt clip, if the belt clip is under the screen, then the surface is not flat anymore therefore you can't use the keyboard.
Personally, i think 80% that Piel Frama Case won't have a belt clip.
p.s. I know a few members here in this thread will want to prove me wrong, well, all i can say is time will tell.
The great thing about the Piel Frama cases is that the clip is optional. You don't have to attach it if you don't want to. If you do want the clip, you pop out a little plastic thingy and screw in the clip "wheel" and use a clip...so this solution will work for all...hopefully.
Edit: Here's an animated GIF of how the clip system works on their cases... http://www.pielframa.com/Animaci%F3n%20grande%20pinza%20super%20nueva.gif
tvrman said:
Well, i have send a mail to Piel Frama, i was wondering of they are also
making a perfect in leader build case for the Ameo or HTC, i got a nice
reply returned.
So let's wait for the good news
Dear Tidde,
First of all I would like to thank you very much for your interest in our
products.
Regarding your question, we have to inform you that we have just received a
device for this model, and we have just started the manufacturing of the
first sample case for this device, so, we will have cases available for this
model in about 15 days. Don’t hesitate that we will put in contact you as
soon as we have the first sample case finished.
Please feel free to contact us for everything you need from us.
Very best regards and have a nice week!!
Rubén Montero
Export Manager.
Http://www.pielframa.com
Click to expand...
Click to collapse
I'm e-mailing Ruben now asking him to check out this post.
Well done, hopefully he will look here and see what options are possible as they go to design? I definitely DO want a belt clip, as where I work I need both hands, but would like the Ameo handy when it's needed!!
Tim
I want:
Mostly as per the PDair case - I like the protection at the front of the Ameo.
Magnetic keyboard attachment, magentic, slide or push clip latch to keep it closed.
Belt loop, or another method of attachment that doesn't leave a component on the case. No pegs.
I don't like the status bar, I don't "use" it per se. It wastes backlight, running the whole screen, and isn't visible in the case anyway.
Of course, I really want it to be Not As Good (or just the same) as the PDair case, so I don't end up spending YET MORE MONEY!
Man, don't you peoples' pants/trousers ever fall down from weighty clip ons? There's NO WAY I could clip the Athena. My pants would come down to my knees!
TigerTim36 said:
Well done, hopefully he will look here and see what options are possible as they go to design? I definitely DO want a belt clip, as where I work I need both hands, but would like the Ameo handy when it's needed!!
Tim
Click to expand...
Click to collapse
Do me a favor and also e-mail him to refer him to the post so he sees more interest in customization of this case.
Thnx
jeffharris said:
Man, don't you peoples' pants/trousers ever fall down from weighty clip ons? There's NO WAY I could clip the Athena. My pants would come down to my knees!
Click to expand...
Click to collapse
I actually wear pants that fit like they are supposed to.
For me, the three things I'm looking for in a case are:
1) Something like the pdair case covering the housing of the phone in leather so the keyboard plastic bit doesn't scratch the screen.
2) Clip/latch to hold the thing shut.
3) Magnetic keyboard holder.
I personally don't need a belt clip, but any company that made it optional would probably be selling a lot of cases at the moment!
P.S. Has anyone noticed that Proporta are working on a case at the moment? It's on their website, but sadly no pictures yet.
All good idea to refer him to this post.
The belt option is no solution for this type of device i thinks
indead to carry a brick on you pants is not the way.
I think there should be made a wallet like case with the option to take
also some memory cards and other stuff in it, indead avoid the plastic
holder for the keyboard.
this case looks very nice.
http://www.pielframa.net/texas_instruments_voyage200.asp
let see where they come's up with..
I think that a belt clip or at least an option to have one would be a great idea. Would mean that the case would appeal to more customers from a marketing side of things. I would wear mine on a belt clip at work and then prob put in my pocket in the evening.
I wonder if anyone would make a leather case just for the screen without the keyboard? Id like to just carry the screen around without the keyboard, yet id be worried about the screen being protected when in my pocket.
So funky new case is a great idea, lets hope and im sure it will be a smart case
i'm looking for pielframa's UNIVERSAL PDA CASE BLACK fit to the athena (perfect would be a seperate pocket for the keyboard).
A case for parts of the Athena
The case that comes with Athena is very good when you want the whole thing with you. What I would like is a case that allows me to only take the phone part, not the keyboard. Something slim that protects the screen. It would allow me to safely take the Athena with me when space is sparse.
//Johan
joohan said:
The case that comes with Athena is very good when you want the whole thing with you. What I would like is a case that allows me to only take the phone part, not the keyboard. Something slim that protects the screen. It would allow me to safely take the Athena with me when space is sparse.
//Johan
Click to expand...
Click to collapse
Completely agree with you just what im looking for.
That's what they invented "belts" for?
jeffharris said:
Man, don't you peoples' pants/trousers ever fall down from weighty clip ons? There's NO WAY I could clip the Athena. My pants would come down to my knees!
Click to expand...
Click to collapse
"Belt Clip"? You know, those things that hold yer kecks up? I have the Ameo in my backpocket, and it JUST fits, but I can't sit down with it...
Belt clips rule...
skoop99 said:
"I have the Ameo in my backpocket
Click to expand...
Click to collapse
omfg, a 800$ device in your backpocket?
what happens if you forget the ameo for one second and try to sit down ?
Looking for a case for the Kaiser that hopefully arrives tomorrow, but like the idea of a belt lock to ensure it won't fall off belt - like my Wizard did ;-(.
Found this one and wondered if amyone had tried one or had any thoughts?
http://cgi.ebay.co.uk/ws/eBayISAPI....om=R40&_trksid=m37&satitle=120213309286&fvi=1
Its really cheap so I guess could be worth a try.
EDIT: Hmmm second thoughts, looks like a generic case as no cut out for thumb wheel?
Any other Kaiser specific cases with this type of belt lock?
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
chibahawk said:
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
Click to expand...
Click to collapse
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Praygo said:
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Click to expand...
Click to collapse
Yes I could see that the inside casing was a bit rough so sanding should stop the problem - but seriously that's a major issue.
Have you found that it holds the phone well though? Because I'm very upset that my phone fell out of it once already but maybe it was an error on my part and it wasn't secure enough...
I've never had the phone fall out of the body glove case.
i mangled my body glove case.
someone bumped into me and the phone fell out of the case AGAIN.
i ripped it to shreds and left it on the side of the road to rot into plastic hell.
i dont recommend this product.
I returned mine. I had the exact same issues (screen and phone falling out). It also didn't attach properly on the top left corner, it was always bowed out. I don't recommend it either.
Anyone got any else to share?
I was THIS CLOSE ( || ) to buying it. lol
Is there anything out there that's similar to it in design, but better?
returned
When all the way snapped on, mine pushed the top left corner so hard the entire screen would not respond to touch. Returned it.
My friend and i had the same issue. We just took it off messed around with it and put it back and it works fine, SOMETIMES it happens again but we just take it off and put it on.
Since there is not any other case that provides this type of protection we are keeping it. I rather my phone be safe than anything else.
I just ordered mine yesterday so I'm anxiously awaiting its arrival.
What exactly did you have to mod to get it to work? According to my readings, you just need to sand down the edges that connect with the screen right?
I may just buy the case and sand down what was mentioned. I like the design of the case..only one so far I really like.
I've been using one for about two weeks and am very happy with it. Had read about the screen pressure issue on other posts (searching helps folks), and scraped down the top corners before I put it on. Don't need a dremel tool or sandpaper. No problems, fits perfectly. The only warning is that it's a little dicey to take off once it's on -- it really fits snugly.
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Torkrench said:
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Click to expand...
Click to collapse
Could you give us the link for the ebay one please!
http://cgi.ebay.com/NEW-RUBBERIZED-...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
That is the one I ordered, and the fit is perfect. The only thing I wish it had was the belt clip insert for the case included. I don't know where to find one, but I mostly keep it in my pocket anyway.
you guys want a good case that protects? check out the monaco aluminum case, it comes with a clear lens on it which I haven't removed but you could if you wanted quick access to the touchscreen. I work in the construction field and have yet to have it fall off my clip. I also dropped my tilt (when I used it) from about 8" off a ladder and it was perfectly fine. The aluminum case for the fuze isn't any more bulky than the body glove case either.
bilbobrian said:
check out the monaco aluminum case
Click to expand...
Click to collapse
I've got one of these as well...and while it does protect the phone very well it will also lower your signal strength. I've had these type cases for the Wizard and Tilt and now the Fuze...whenever I'm in an area where the signal was a little iffy to begin with I WILL either drop the call or be unable to answer with the metal case. So, stay away from the aluminum ones if you go into lower coverage areas (and no...the slots they cut in the back to help improve the signal don't actually help.)
Friend recommended this to me, '303 Aerospace Protectant' works like a charm at keeping fingerprints off the screen & if you do get any it's really easy to wipe them off. I had tried RainX & it worked, but not really well. Also as a side note you can use this stuff on just about anything ! My car looks like new again inside & out. Even tires. At any rate give it a try. I'm done with screen protectors.
http://www.amazon.com/303-Products-...CURW/ref=sr_1_1?ie=UTF8&qid=1330317077&sr=8-1
If this has been mentioned here before, my apologies.
Thanks for posting this. I've never heard of any stuff like this. I will definitely be trying it soon. I've never liked armor all and this seems like what I really want.
pov1 said:
Friend recommended this to me, '303 Aerospace Protectant' works like a charm at keeping fingerprints off the screen & if you do get any it's really easy to wipe them off. I had tried RainX & it worked, but not really well. Also as a side note you can use this stuff on just about anything ! My car looks like new again inside & out. Even tires. At any rate give it a try. I'm done with screen protectors.
http://www.amazon.com/303-Products-...CURW/ref=sr_1_1?ie=UTF8&qid=1330317077&sr=8-1
If this has been mentioned here before, my apologies.
Click to expand...
Click to collapse
I have some of this in my trailer. I'll have to give it a try. Do you spray it onto a towel and wipe it on the screen?
I just use a paper towel to put on & a micro-fiber cloth to wipe off/polish. My tablet is still holding up fine where as my phone with the RainX isn't, so put the 303 on it tonight. I'm sure your going to be happy with it, let me know & no I'm not in any way shape or form involved with the company I just love the stuff.
So lets say someone takes a key and slides it across your screen? Does it protect it then? (No flame intended... I'm trying to wiegh the pros and cons of this stuff compared to the ****e screen protector I got off amazon free with a case.) The screen protector I have now picks up scratches like a scratching post for an animal... but the screen underneath is most likely pristine.
Jeez ! Do you know the difference between Protectant and Protector ?
Hmm made me curious, saw it on ebay also.
Dit you tape-off the front-camera or microphone? I have the later model with mic between glass and alu.
carpenterethan said:
So lets say someone takes a key and slides it across your screen? Does it protect it then? (No flame intended... I'm trying to wiegh the pros and cons of this stuff compared to the ****e screen protector I got off amazon free with a case.) The screen protector I have now picks up scratches like a scratching post for an animal... but the screen underneath is most likely pristine.
Click to expand...
Click to collapse
If someone did that to my A500, I'd spray the person in the face with 303 Aerospace Protectant. But seriously, no screen protectors for me. I may try this stuff.
No, I just put it on carefully Also found two things if you put it on wipe off & let set overnight it seems to work better. I still haven't done a second coat yet but have read that works better I don't know. All I know as I said mine is still holding up. Just use a micro fiber cloth to touch it up occasionally.