Database Users

[Q] Help Please! can't install any roms

Hello..I had WajkIUI_multilang_1.11.18_RTL, which was working just fine then i tried a new rom,,i didn't like it so when i tried to go back to the old rom,i just can't finish the installation,when i use the RSD lite to install the original rom it works fine then i root the device,then i installed SndInitDefy then when i go to the recovery menu i can't install the rom,,i've tried manytimes , but the same thing happens:
when i try to wipe the data or cache: E: Can't open /tmp/recovery.log
so i go to the next step by choosing the installation of the rom and i get this message:
E: can"t make /tmp/update_binary
ClockworkMod Recovery v2.5.1.8
insallation aborted
Please help my..i don't know what to do now,i went to the Wajkiui rom page and red everything carefully ..but still can't change my rom, i need to insatll the Wajkiui rom
right now the rom is : shadow-128 2.3.4
that alot

Which version of 2ndinit did you use?
The best for wajkiui is 1.4.2
Or you can try to select stable recovery instead of latest recovery.
I'm using the same config(shadow_2.3.4-134_DFP-10.sbf and WajkIUI_multilang_1.12.16_ICS.zip)

i'm using the same version..i've tryied everything in the Recover to install the rom,but i still get the same error message

This is what i'm going:
Rooted the device, installed SndInitDefy_1.42.apk and activated the Sndindefy
i copied the rom into my MC.
started my phone
Entered the boot Menu
in the RECOVERY menu there are only two options: ( Custom Recovery- Stock Recovery )
in Custom Recovery- Wipe data/cache =
formatting data...
formatting cache...
formatting sdext...
No app2sd partition found. Skipping format of /sd-ext.
formatting sdcard:/.android_secure...
Data wipe complete.
E: cant open /tmp.recovery.log
then i choose: install zip from sdcard
i chose the rom zip.
--installing: sdcard:wajkiui..
Finding update package..
opening update package..
Installing update...
E: Can't make /tmp/update_binary
Installation aborted.

Ok...
I dont't know what it could be...
Try wipe dalvik cache too.(under avanced menu)
And try to format your sd card.
It worked for me with the "shadow_2.3.4-134_DFP-10.sbf".
rooted by "root4defy134.zip" (applied in stock motorola recovery)
then installed 2ndinit 1.4.2 (2.0 worked too) and installed the latest wajkiui.

Try downloading the zip file again. Maybe it's corrupted.
Sent from my MB526 using XDA App

I've formatted the memory card..i downloaded the rom again..the problem isn't with the rom..its in the RECOVERY option..cuz b4 installing the rom the device isn't able to wipe neither the cache nor the data...and after that the rom is unable to install
plus the (avanced menu) isn't showing,
i really don't know what to do next...

Ok.
Just try now with 2nd init 2.0. Insall 1.0.7(it wil ask during install recovery,WIFI nedded)
Now you must have advanced menu.

I've done what u told me,,,and it WORKED ..yaay..lol
thats alot buddy, i've been trying to fix it for the past 3 days..and u've helped me alot..even though i insalled many roms inclding the Waijk using the same old version of 2nd init..i don't know why it gave me so much truble sudenly..anyways the problem is solved with YOUR help..
I want to thank u for ur time and concern,,

That's cool! I'm glad that I could help.

buruss said:
Ok.
Just try now with 2nd init 2.0. Insall 1.0.7(it wil ask during install recovery,WIFI nedded)
Now you must have advanced menu.
Click to expand...
Click to collapse
how to do this... please help me.. i wanna install cutom rom like thread stater, now stuck at splash screen

[Q] Please help me, error while flashing

Hi guys, I hope you can help me.
I have just rooted + flashed my motorola defy plus for the first time (on any device for that matter)
I installed 2nd init, version 0.6.... or something.
Put a rom, kernel and google apps on my sd-card
Then I turned usb-debugging off and rebooted my phone.
Now I can get into bootmenu, and this is what I do:
1) go to recovery
2) select custom recovery
3) then it says: Clockworkmod Recovery v2.5.1.8
E: Can't open /tmp/recovery.log
4) I then select wipe data/factory reset
5) then it says this: Formatting DATA
Formatting CACHE
FORMATTING SDEXT
No app2sd partition found. Skipping format of /sd-ext
Formatting SDCARD:/.android_secure
Data wipe complete
E: Can't open /tmp/recovery.log
6) After that i select install zip from sdcard
7) then I select choose zip from sdcard
8) then I select the zip file containing the rom
9) And it says: Finding update package
Opening update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted
Now I can't go any further and can't use my phone at all
I hope u guys can help me, and that I haven't F*ed up my phone

I have a quite similar problem.
On a defy+,rooted 2ndinit installed, backup-ed first, download the new quarx05/03 ICS, put the zip on sd, wipe data, reboot and start to install ics, but the message was
''Finding update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted"
Thanks to the previously backup I can use may phone as usual.
What I have done wrong with de ICS installation?
Thanks
PS. Sorry for probable a dummie question:What we have to do with md5 zip near the CM9 Jordan.zip?

A little help please about the subject?
Thank you

ics
The entire process
ClockworkMode v2.5.1.8
Wipping data...
Formatting DATA...
Formatting CACHE...
Formatting SDEXT..
No app2sd partition found.Skipping format of /sd-ext.
Formatting SDCARD: /.android_secure...
Data wipe complete
E: Can't open /tmp/recovery.log...
Installing: SDCard:download/CM9-ICS-MR1-120305-jordan.zip
Finding update package
Opening update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted
if try Wipe Dalvik Cache:
E: Can't mount /dev/block/mmcblk0p2
(No such file or directory)
I guess that this is a simple and many times occured error, since nobody has any answer....

Does you disabled the usb debugging before flashing?

Yes I do, but nothing change,
Thanks

if I'm not mistaken the last release of 2nd init is not compatible with defy. Try to check this on the development forum. I hope I have been of help.

I'd tried with both 1.0.7 latest and 0.6.1.
With latest, the phone is blocked.
Thanks

I had used this. Try with it
P.S. sorry for my bad english.

Tried, the same errors,
Thanks

I don't know. Sorry. By the time i had used that.

I think you need to go to stable recovery after you wipe your data from custom recovery
Sent from my MB525 using xda premium

I think you need to go to stable recovery after you wipe your data from custom recovery
What do you mean by "stable recovery"? You talk about version 0.6. of 2nd init or something else?
Can you show a step-by step procedure?
Thank you in advance.
However, which is the procedure to un-root a defy+ and to have it with the original, fresh system?

I had flash a new SBF, root with Unlockroot v2.3, anything else doesn't work, 2ndinit v2.0 stable, wipe data/cache/dalvik (same errors), try to install cm9-ics, the same error "Can't make /tmp/update_binary"
What the f.....?

cretu22 said:
I had flash a new SBF, root with Unlockroot v2.3, anything else doesn't work, 2ndinit v2.0 stable, wipe data/cache/dalvik (same errors), try to install cm9-ics, the same error "Can't make /tmp/update_binary"
What the f.....?
Click to expand...
Click to collapse
Hi, I have exactly the same problem.. Trying to find a solution but is quite difficult. First I thought it has something to do with the partitioning, as stated in THIS topic. But, in THIS topic, people say that partitioning the SD card is not necessary at all..

@Cretu22: Yes stable recovery is CWM 0.6
Don't install stable recovery! I too faced this issue when I flashed using stable recovery. In snd init install Latest recovery and then try flashing your ROM. That should work..

I did choose the stable version indeed 0.6.7.
Now i did uninstall it and installed the latest 1.0.7, but when I reboot my phone it won't get into the boot menu but just boots into android. Tried it several times, but only with 0.6.7 I seem to be able to get in the menu

fokkeh said:
I did choose the stable version indeed 0.6.7.
Now i did uninstall it and installed the latest 1.0.7, but when I reboot my phone it won't get into the boot menu but just boots into android. Tried it several times, but only with 0.6.7 I seem to be able to get in the menu
Click to expand...
Click to collapse
Okay!! I hope you were pressing the volume down button when the blue LED came?? Try doing this again all over.. I mean reinstall 2nd init and then latest recovery.. I remember doing this once(instal latest recovery after I installed stable recovery)..

pranks1989 said:
Okay!! I hope you were pressing the volume down button when the blue LED came?? Try doing this again all over.. I mean reinstall 2nd init and then latest recovery.. I remember doing this once(instal latest recovery after I installed stable recovery)..
Click to expand...
Click to collapse
Yes, its working Pressing the volume down button was not necessary with 0.6.7, that was what went wrong. Now the zips installed like a charm

i know the answer and is very simple
the problem is that you cannot create that specific folder.... because it already exist, cmp (connected music player) creates it, just delete it from SD and done!

[Q] Last version of CM10.1 for defy (mb525)

Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards

http://forum.xda-developers.com/showpost.php?p=34616788&postcount=1
--> FAQ2
It should work for both. Same as latest builds of CM10.

thubi said:
http://forum.xda-developers.com/showpost.php?p=34616788&postcount=1
--> FAQ2
It should work for both. Same as latest builds of CM10.
Click to expand...
Click to collapse
Sorry I was meaning the 4.1.2 so it should be the 10.0

Cid156 said:
Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards
Click to expand...
Click to collapse
2ndboot builds: they are one build for both mb525 &5 26 .... so you can download the 26.03 nightly build and update on your MB525 :good:

Cid156 said:
Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards
Click to expand...
Click to collapse
Yes, there is CM10 from Quarx. Your device can be either mb525 or mb526 with red lens or green lens. CM10.1 from the same person also can.

hi
I have a similar question I have MotoDefy 525 running 2.3.7 I want to install ([ROM][JB+][4.3.1] MokeeOS 43.1 Defy/Defy(+) Official) http://forum.xda-developers.com/showthread.php?t=2453395
but it needs TWRP I tried installing on my 2.3.7 but it dosent install I looked around the forms I read that I have to up date my android version.
being a newbi im a little worried about bricking
A little help
can some one give the steps in Newbi language on how to update my phone to MokeeOS 43.1 please.:fingers-crossed:

Super_Moto said:
hi
I have a similar question I have MotoDefy 525 running 2.3.7 I want to install ([ROM][JB+][4.3.1] MokeeOS 43.1 Defy/Defy(+) Official) http://forum.xda-developers.com/showthread.php?t=2453395
but it needs TWRP I tried installing on my 2.3.7 but it dosent install I looked around the forms I read that I have to up date my android version.
being a newbi im a little worried about bricking
A little help
can some one give the steps in Newbi language on how to update my phone to MokeeOS 43.1 please.:fingers-crossed:
Click to expand...
Click to collapse
First of all, none of you guys ever read the stickies. It is packed with good info.
Our phone has a locked bootloader, it is almost impossible to brick.
Download latest CM10 and then install.

Ive come across a newbi problem im on the link of the latest cm10 (http://forum.xda-developers.com/showthread.php?t=1768702) and the file I try to flash wont install it gets aborted, I searched the forms for other cm10 and same issue file gets aborted.
If possible to be directed to the file I need to flash to cm10
not easy being newbi these days :crying:
Motorola 525 green lens running 2.3.7

What error do you get?
Sent from my MB526 using Tapatalk

hotdog125 said:
What error do you get?
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
the error shows when I try to flash the .zip file _Install zip from sdcard_choose zip from sdcard I pic the file and it doesn't install it says aborted show me the yellow triangle symbol I was assuming im flashing the wrong file.
before I do an install I wipe data/factory reset and wipe cache partition

Super_Moto said:
the error shows when I try to flash the .zip file _Install zip from sdcard_choose zip from sdcard I pic the file and it doesn't install it says aborted show me the yellow triangle symbol I was assuming im flashing the wrong file.
before I do an install I wipe data/factory reset and wipe cache partition
Click to expand...
Click to collapse
You are trying to flash through stock recovery. Install through custom recovery.

hotdog125 said:
You are trying to flash through stock recovery. Install through custom recovery.
Click to expand...
Click to collapse
I tried that and im also giving me (installation aborted) I used file cm-10-20130918-NIGHTLY-mb526 but no luck

Super_Moto said:
I tried that and im also giving me (installation aborted) I used file cm-10-20130918-NIGHTLY-mb526 but no luck
Click to expand...
Click to collapse
The file is ok, i've installed it on my defy

MikBre said:
The file is ok, i've installed it on my defy
Click to expand...
Click to collapse
Im clue less what im doing wrong I looked on u tube on installing jelly bean im following the same steps but Im getting (file aborted) when I try flashing the file
what r the steps u take on installing the file ?
At first I tried: Reboot in _Recovery _Install zip from sdcard_choose zip from sdcard_pick the the file _yes install
it starts by saying
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
2nd I tried
Reboot in Bootmenu
Recovery _ Custom Recovery etc ..etc ..
and get the same message
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
always did the factory rest and wiping during both process

Super_Moto said:
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
just to be sure, your phone is not connected to a computer when you did the flash, right?

jh20 said:
just to be sure, your phone is not connected to a computer when you did the flash, right?
Click to expand...
Click to collapse
yes phone is disconnected from computer,I had no issues installing cm7
My is CMRecovery v5.0.3.2-jordan
and Bootmenu <v1.1.1> could these be the problem some thing needs to be updated ?

Super_Moto said:
what r the steps u take on installing the file ?
Click to expand...
Click to collapse
If you want a video guide look at the Youtube channel of locslikes.
Therre is a guide call "MOTOROLA DEFY How To Install ClockWorkMod and Cyanogenmod 10 Jelly Bean Android"

MikBre said:
If you want a video guide look at the Youtube channel of locslikes.
Therre is a guide call "MOTOROLA DEFY How To Install ClockWorkMod and Cyanogenmod 10 Jelly Bean Android"
Click to expand...
Click to collapse
Im just guessing.... that my bootmenu seems to be out of date possible being the reason that jellybean wont install,
bootmenu is up to 2ndInit Recovery v2.3 can this file be installed over v1.1.1 ?

Super_Moto said:
Im just guessing.... that my bootmenu seems to be out of date possible being the reason that jellybean wont install,
bootmenu is up to 2ndInit Recovery v2.3 can this file be installed over v1.1.1 ?
Click to expand...
Click to collapse
out of curiousity, i restored my mb525 back to cm7 nightly 20111201 nandroid, which has cwm v5.0.3.2. i did not check the bootmenu version but it should be the same as yours. then, after formatting system/cache partitions, i flashed cm-10-20130918-nightly-mb526.zip, and it worked.
so i don't really know what's wrong with your phone, but i have a couple of suggestions for you to try. not that there's any logical explanations but try it anyway:
1. according to the error messages, you have the cm10 rom in the root folder of the sdcard. try creating a sub-folder called cm10 and copy the cm10 rom and the minimal gapps into it.
2. download the defy_fullwipe_ext4.zip and defy_fullwipe_ext3.zip ( for later use, when you want to revert back your rom) from here and put them in cm10 folder as well:
http://forum.xda-developers.com/showthread.php?t=1818520
3. reboot into recovery but don't do any format or wipe. instead flash the file defy_fullwipe_ext4.zip and this will format your partitions into the ext4 file system.
4. then flash the cm10 rom. if it installs sucessfully, then without any further wiping,nor flashing the minimal gapps, reboot the phone. (note that the os will reboot once more in the middle of booting up, seemingly having a bootloop problem. don't worry it's meant to do that, unless it rebooted more than once)
5. if it boots up sucessfully, do some basic set up first before rebooting back into recovery to flash the minimal gapps.
alternatively you could try flashing cm9.1 (ext3) to get a newer bootmenu and cwm versions before flashing cm10. no need to flash any gapps, just wipe system/cache partitions and flash the cm9.1 rom by itself. reboot into cm9.1, do basic set up. once it's ready reboot into recovery and do the above steps, starting from step 3, to flash cm10.
good luck.....
edit: did you get your cm10 rom from here:
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/

jh20 said:
out of curiousity, i restored my mb525 back to cm7 nightly 20111201 nandroid, which has cwm v5.0.3.2. i did not check the bootmenu version but it should be the same as yours. then, after formatting system/cache partitions, i flashed cm-10-20130918-nightly-mb526.zip, and it worked.
so i don't really know what's wrong with your phone, but i have a couple of suggestions for you to try. not that there's any logical explanations but try it anyway:
1. according to the error messages, you have the cm10 rom in the root folder of the sdcard. try creating a sub-folder called cm10 and copy the cm10 rom and the minimal gapps into it.
2. download the defy_fullwipe_ext4.zip and defy_fullwipe_ext3.zip ( for later use, when you want to revert back your rom) from here and put them in cm10 folder as well:
http://forum.xda-developers.com/showthread.php?t=1818520
3. reboot into recovery but don't do any format or wipe. instead flash the file defy_fullwipe_ext4.zip and this will format your partitions into the ext4 file system.
4. then flash the cm10 rom. if it installs sucessfully, then without any further wiping,nor flashing the minimal gapps, reboot the phone. (note that the os will reboot once more in the middle of booting up, seemingly having a bootloop problem. don't worry it's meant to do that, unless it rebooted more than once)
5. if it boots up sucessfully, do some basic set up first before rebooting back into recovery to flash the minimal gapps.
alternatively you could try flashing cm9.1 (ext3) to get a newer bootmenu and cwm versions before flashing cm10. no need to flash any gapps, just wipe system/cache partitions and flash the cm9.1 rom by itself. reboot into cm9.1, do basic set up. once it's ready reboot into recovery and do the above steps, starting from step 3, to flash cm10.
good luck.....
edit: did you get your cm10 rom from here:
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/
Click to expand...
Click to collapse
I did try using that link but the files still would abort when flashing, also tried http://d-h.st/users/Quarx files it did the same thing
I followed your instruction but decided to goto cm 9 first I flashed the (ext3) file it installed and cm9.1 installed also installed twrp with no issues but when I was going through cm9 and its functions I couldent go on line a popup message (Unfortunately, brower has stopped) also I wasn't able to log on google play a pop up message (Unfortunately,com. google android.gb has stopped). so I got fed up and decided to goto cm10.1 so I first flashed with ext4.zip it installed and then tried to flash 10.1 file once again the file wouldn't install it gave me aborted file message again. I had no choice to reboot and I had to reinstall the factory file(brick). I am now back to where I started :silly: cm7 2.3.7 its been a hell of a weekend ........... ill give it another shot soon :fingers-crossed:

[Q] Error Install android 4.4 on mb526

Hi, sorry for my bad english but i'm italian and i'm new of the world of costume rom (i did the root yesterday:laugh.
I see that "quarx" make a good 4.4 kitkat rom for the defy plus and i tried to install it but when i make it appears "error on the .zip file" and the smartphone can't install it.
This are the step that i have make:
1 obviously the root
2 install 2ndInit version 2.3
3 go to recovery mode
4 make "wipe data factory reset"
5 make "wipe dalvick cache"
6 go to install zip from sd card
The version of the zip is the last posted by quarx, i try with the other version but same problem.
Where is wrong? someone can help me? Fortunately before do all this i make the bakup and now i'm returned with the original 2.3.6 motorola rom.
Ps: i repeat, i'm italian and new for this type of work. Please write easily and step-by-step what i have to do. Thanks!!!

Install 4.3, then download and flash update-recovery from 4.4 thread. Now reboot and flash 4.4
Sent from my MB526 using Tapatalk 4

Thank you very much!!! :good::good::good: This afternoon (if i have time) i will try and i telling you if it work.
Another two question without open other thread: when the defy is upgraded to 4.4 can i do the overclock with a normal apk or i have to do it in recovery mode? And can i install the patch for make 720p video or it was only for the 2.3.6 version?
For the overclok i see that in some costume rom i can use a apk, in other no.

Apk will work
Sent from my MB526 using Tapatalk 4

Nothing, with cm 10.2 same problem, " error in /sdcard/.....zip, installation aborted" :crying:

Stefano2991 said:
Nothing, with cm 10.2 same problem, " error in /sdcard/.....zip, installation aborted" :crying:
Click to expand...
Click to collapse
First install one of the latest CM10/10.1 and then flash CM10.2.

hotdog125 said:
First install one of the latest CM10/10.1 and then flash CM10.2.
Click to expand...
Click to collapse
Yessssss!! it work :victory: i have installed cm10, it automatically reboot, install update-recovery, installed cm11 and work!!!
But now i have some other problems, after install cm11 and turn on and off it i install the gapps. Do that i boot it and appear "app updating", it rest in this screen for a lot if time, i turn off it, boot again and it doesn't work, wipe again all, re- install cm11+gapps in the same time and now it load in the first screen CyanogenMod and don't start working...re-wipe all, re install only cm11 and now (after a lot of time of loading) it's on but the screen is all black exception to notification bar, and now with the new recovery mode i can't make restore of my original data file and i don't know why!! when i enter in recovery-mode/restore there is nothing...F**k!!! Why i'm the only with tis problem??? :crying::crying::crying::crying:

At the end i have decide to install cm10.2...i see that works well (better than cm11) and is stable. When will be available the 4.5 or higher i'll think if make the upload because if i'll have the same problems of updating i'll killing myself!!! :silly: ... for now it's good the android 4.3. from 2.3.6 to 4.3 is a big jump!!! Now the phone works 100000 times better and faster!!!! :laugh:
However thanks for the suggestions!!! :good:

[Q] LG E400 dead phone

hello guy / hello xda expert's
first i'm newbie guy :crying:
2- i have lg e400
and i installed this rom
after installation the phone boot up and give me this message "encryption unsuccessful" by the way installed SDmerge one :crying:
3- i tried to install it again but no luck and i wipes system ,data ,cache etc.. :crying:
4- i tried to install another rom but when i put zip in sdcard it didn't show up in twrp mode to install :crying:
5- no files show up sdcard and can't mount sdcard
6- i tried to flash using KDZ but again no luck :crying:
there is terminal command in twrp v2.7.0.1
what i need is Help! Help! Help! Help! :crying::crying:

ahmed_007 said:
hello guy / hello xda expert's
first i'm newbie guy :crying:
2- i have lg e400
and i installed this rom
after installation the phone boot up and give me this message "encryption unsuccessful" by the way installed SDmerge one :crying:
3- i tried to install it again but no luck and i wipes system ,data ,cache etc.. :crying:
4- i tried to install another rom but when i put zip in sdcard it didn't show up in twrp mode to install :crying:
5- no files show up sdcard and can't mount sdcard
6- i tried to flash using KDZ but again no luck :crying:
there is terminal command in twrp v2.7.0.1
what i need is Help! Help! Help! Help! :crying::crying:
Click to expand...
Click to collapse
kzd aagain. then using cwm. don't use buggy twrp or u'll brick it again

This is normal. Don't panic
So did you manage to get it back working. Or still dead. I could help you if it's still dead. Had done this several times with L3 while *experimenting*.
BTW if you could briefly explain this,
"
i tried to flash using KDZ but again no luck
Click to expand...
Click to collapse
I could walk you through it. Cheers!

ahmed_007 said:
hello guy / hello xda expert's
first i'm newbie guy :crying:
2- i have lg e400
and i installed this rom
after installation the phone boot up and give me this message "encryption unsuccessful" by the way installed SDmerge one :crying:
3- i tried to install it again but no luck and i wipes system ,data ,cache etc.. :crying:
4- i tried to install another rom but when i put zip in sdcard it didn't show up in twrp mode to install :crying:
5- no files show up sdcard and can't mount sdcard
6- i tried to flash using KDZ but again no luck :crying:
there is terminal command in twrp v2.7.0.1
what i need is Help! Help! Help! Help! :crying::crying:
Click to expand...
Click to collapse
FIRST: Revert to stock.
SECOND: Flash CWM.
THIRD: In rom would You like to install (zip file) REMOVE recovery.img, 'cause it's TWRP recovery.
FOURTH: Enjoy with Your new ROM.
Sorry, too many Caps Lock.
Wysyłane z mojego LG-E400 za pomocą Tapatalk 2