Two problems with Motorola Defy + - Defy Q&A, Help & Troubleshooting

Sorry for the bad section I'm new. I'm from Poland, and all I translate with Google translate.
Welcome. Some time ago I root my defy+ and used Titanium Backup to remove applications that are preinstalled on the phone and I do not need. The problem I have is that I removed the launcher and added permanently removed him entirely from the phone. When I unlock the phone turns the message: "The application Home (process com.motorola.home) has stopped unexpectedly. Please try again." Please understand me that I have not come to any application, options or anything. In short, I do not have the desktop ..
By what I described above, restoring the factory settings I have this error all the time.
Next thing is the Rom .. I can't install it (ICS 4.0.4) because I don't have the option "instal zip from sd card" for the installation 2ndinitdefy.apk stretches, but I can not install it because I do not have access to the desktop. Impossible to ignore these problems and install Rom by means of RSD Lite?
Rom who wants to install a Super Stable ICS 4.0.4 Firmware
Informations:
Motorola Defy+ (MB526), Android 2.3.4, Rooted (Normal Android. He haven't other modifications. Only root.)

It is impossible to revive it without rsdlite unless you have a custom recovery(bootmenu), thru which you can flash any rom you want
Sent from my MB526 using xda premium

Hi, I don't have a motorola. But I have Sony xperia sola and I did the same mistake of deleting Launcher.
Do you have ADB installed on Pc?
If yes, then I can help you..
Sent from my MT27i using xda app-developers app

xxrahulxx said:
Hi, I don't have a motorola. But I have Sony xperia sola and I did the same mistake of deleting Launcher.
Do you have ADB installed on Pc?
If yes, then I can help you..
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Yes, I have ADB on my PC. I'm waiting for instructions

Step 1. Get the launcher's apk file from forum. Any smart enough guy would be able to give you one.
Step 2. Copy that file to ADB folder on Pc.. Connect the phone to Pc with debugging enabled.
Step 3. Start command prompt window in the ADB folder. Shift + rightclick > open command prompt here
Step 4. Type in "adb push /system/app/<launcher filename>.apk
Step 5. Restart the phone. You must be having that launcher now
Sent from my MT27i using xda app-developers app

xxrahulxx said:
Step 1. Get the launcher's apk file from forum. Any smart enough guy would be able to give you one.
Step 2. Copy that file to ADB folder on Pc.. Connect the phone to Pc with debugging enabled.
Step 3. Start command prompt window in the ADB folder. Shift + rightclick > open command prompt here
Step 4. Type in "adb push /system/app/<launcher filename>.apk
Step 5. Restart the phone. You must be having that launcher now
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Ok, I do this, but I can't turn on USB debugging, I don't have my desktop. I see problem with launcher and I can't do anything. ;/

Your only option is to find out which ROM you had, then download the proper SBF from here: http://sbf.droid-developers.org/umts_jordanplus/list.php
Then poweroff your device, push VOL+ and POWER and you'll get to a black screen (the Bootloader). Use RSDLite (on Windows) or sbf_flash (on Linux/OSX) with the .sbf file you downloaded.
It will revert your device as it was before you deleted the Launcher.
Then you can start again with root and then ICS and so on.

Please, help me with search ;/
About phone: Motorola defy+ Android 2.3.4 Kernel 2.3.6 Retail En.GB

Try the one geographically and carrier wise applicable to you. For a fail safe method take the most recent one from the ones applicable
Sent from my MB526 using xda premium

Radziarz2 said:
Ok, I do this, but I can't turn on USB debugging, I don't have my desktop. I see problem with launcher and I can't do anything. ;/
Click to expand...
Click to collapse
In that case, I can't help you.. Unless you find a way to enable USB debugging.
Sent from my MT27i using xda app-developers app

Radziarz2 said:
Please, help me with search ;/
About phone: Motorola defy+ Android 2.3.4 Kernel 2.3.6 Retail En.GB
Click to expand...
Click to collapse
Open settings, last item (About) and then read BPflex and APflex, In the page i gave you, search for them both. When you find a ROM with both of them, you have likely found what you need. If there are more than one, check its description on the left.

thekguy said:
Try the one geographically and carrier wise applicable to you. For a fail safe method take the most recent one from the ones applicable
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Sorry, I don't understand you. Please write so that I understood

Why RSD Lite not deteced my Defy+? (first time using)

Oh man!!!!!!!!!!!!! Thanx guys! Greetings from poland homies!

Related

2ndInit_Installer

Found by laidaxin , from w.w.w.591fan.c.o.m
for us that are noobs, what exactly is this?
dingding2012 said:
Found by laidaxin , from w.w.w.591fan.c.o.m
Click to expand...
Click to collapse
Doesn't work for me.
Sent from my MB860 using XDA App
thebluetoothkid said:
for us that are noobs, what exactly is this?
Click to expand...
Click to collapse
Its supposed to be a working recovery for flipside. I can't get it to work however.
Sent from my MB860 using XDA App
I tried and it was a working recovery for my 508.
I installed it.
when reboot, I continued clicking the volumn down button, and the entered.
Sorry for my poor English.
dingding2012 said:
I tried and it was a working recovery for my 508.
I installed it.
when reboot, I continued clicking the volumn down button, and the entered.
Sorry for my poor English.
Click to expand...
Click to collapse
I am able to do all that also, but can't backup and can't install anything. I get error can't mount data/recovery and aborts.
ok... so i'm trying for the 100th time to install this silly thing... and for some reason... when i try to run it... it kicks me out...
i'm not sure what i'm doing wrong...
when i attempt to pause the install process... i get a screen full of if i type adb without an argument...
if someone could gimme a hand with this or tell me what the hell i am doing wrong... i'd appreciate it...
i wanna try to get laidaxin's cm7.2 working on my phone...
i dunno if it matters... but i am attempting to install from a windows xp machine...
Hello!
First, Thanks to all people around this work, specially Laidaxin for good work.
Well, sadly... I also still stuck on install the FlipSide recovery option of the first post... I did all te proccess by eleven times, testing different details that may be not clear for me (as run as administrator, with abd CMD screen closed and opened, if the version of adb never shows me the logs that appears in cmd screenshot... several times I got on the FlipSide the screens talking about su and later 2ndinit script got superuser permissions... but the screens of cmd generated by the script are so fast that was not able to read or check if the 2ndinit script was succesfull or if there something else that may be failing/missed... so by now still no luck)
as a resume, in hope that may help to test from new friends around here:
1) I reflashed my FlipSide to stock with sbf from the other thread tutorial (I use sbfflash in linux and everything works fine, using Power+UParrow in keyboard to enter in bootloader mode my Flipside)... and then I insert my SIM and SD card wiped with only the CM7-Laidaxin.zip file on it, ...complete setup as minimal possible in order to be able to set USB mode to memory access, and turn on usb development in applications menu.
2) Then I ROOT with SuperOneClick version 2.1.1!!! and connect my phone in normal use screen home (NOT bootloader mode!) with UBS debugging turn on and with USB mode set to memory card access (NOT Moto Portal No Media access...), the other methos with Z4root and newer versions of SuperOneClick FAILS for me...
3) I then try to install recovery with Laidaxin installer and procedure, but as I said after some attemps I still not success in get the recovery working, also try diferent ways... removing battery then reboot with VolumeDown pressed, Turn off normal and repeat, turning ON AND AFTER see the Red Moto press the VolDown key short time, later maintained it long, then pressing it several times, etc...
So, I made this resume in order to share info from my side and hope to save some time to other friends that may want to test the CM7 from Laidaxin, than in fact seems like a GREAT work for our Flips... so please if any help to get this fully working and tested will be very gratefull...
Best regards!
Ok... since I still can't get the automated installer working... I would really appreciate if someone could direct me to the forum/website that that installer came from... I would love to try to push it myself... but I'd have to do some reading...
Sent from my MB508 using Tapatalk
rignfool said:
Ok... since I still can't get the automated installer working... I would really appreciate if someone could direct me to the forum/website that that installer came from... I would love to try to push it myself... but I'd have to do some reading...
Sent from my MB508 using Tapatalk
Click to expand...
Click to collapse
Hi!
Ok, I am not totally sure, but I suspect that this is the original link of this recovery, however, just now I need to go to my work, so, I do not have chance right now to check it, but hope may be usefull.
http://forum.xda-developers.com/showthread.php?t=944543
Best regards!
You should be able to install it like this:
- Extract everything in the "data" folder into a folder called "bootmenu" on your sdcard
- Then use either "adb shell" from a command prompt, or Terminal Emulator on the phone should work:
Code:
su
cp -R /sdcard/bootmenu /data/bootmenu
cd /data/bootmenu
chmod 0755 *
./install.sh
And it should say "Install complate...."
You can also remove the folder(s) if you want:
Code:
rm -R /data/bootmenu
rm -R /sdcard/bootmenu
Then to get into it, reboot the phone and once the notification light turns on, hit volume down
You my friend.... are the ****ing man...
FYI
Use the touchpad to select
Sent from my MB508 using Tapatalk
One thing doesn't work though... it can't unmount system... so I was unable to do a nandroid restore... rather depressing....
Sent from my MB508 using Tapatalk
rignfool said:
One thing doesn't work though... it can't unmount system... so I was unable to do a nandroid restore... rather depressing....
Sent from my MB508 using Tapatalk
Click to expand...
Click to collapse
I ran into the same problem but mine also stopped me from installing any other rom to test, run, or otherwise. I'm at a standstill in terms of helping test.
rignfool said:
One thing doesn't work though... it can't unmount system... so I was unable to do a nandroid restore... rather depressing....
Sent from my MB508 using Tapatalk
Click to expand...
Click to collapse
laidaxin's rom replaces this recovery with one that doesn't quite work perfectly yet...
You should be able to boot back into CM7 and re-run the above commands and it'll work again
That doesn't change anything for me... it still won't unmount system...
I think if I read the output from the script install...
Our recovery installs to system... since Motorola doesn't love us
Sent from my MB508 using Tapatalk
Maybe try "rm -R /system/bootmenu" then install it...
rignfool said:
That doesn't change anything for me... it still won't unmount system...
I think if I read the output from the script install...
Our recovery installs to system... since Motorola doesn't love us
Sent from my MB508 using Tapatalk
Click to expand...
Click to collapse
It does the same for me, which is what's keeping me from trying CM7, as I have no way to restore my current nandroid. The defy installs their recovery to /system as well and I gather that it works as intended, I wonder if it's that we need our own build of CWM. Do we know if whoever built CWM for the defy has their source tweaks available?
Unless you have something irreplacable in your /system or /data... I would just have RSD lite and an sbf ready... and take the plunge...
Because....
When you use CM7... apps2sd moves not only the apk... but also the lib files to the sd card...
As long as you switch the 'network operator' to GSM only (in wireless and networks)... laidaxin's kang runs beautifully... much much faster than stock
Sent from my Filpside using Tapatalk
Link2SD has no problem moving the lib files in our stock rom... I'm no stranger to reflashing with RSD Lite, it's just tedious to get everything set back up JUST right, and this is exactly the kind of thing nandroid is great for.

[Q] Wiki root 2.3.3

Hi guys ...firstly Id like to apologize for my english cause iam from slovakia .....
Ok now my problem.... today i finally decided to root my HTC DESIRE Z 2.3.3
Soft.num. : 2.42.405.4
Somewhere i found out that the only working way is according to the wiki it means that firslty i have to downgrade my phone i downloaded ADB installed needed packages .... i did every step according to wiki and when i type "adb devices" to my command promt it says "list of devices attached" and it finds my device.... but when i type "adb push fre3vo /data/local/tmp" it says cannot start fre3vo no such a file or directory
it's a simple problem, adb is not finding fr3vo. try moving fr3vo, and the other files you downloaded and extracted, into the same folder where you're running adb from. or if you have adb access set up universally, in the terminal just cd into the directory where you have the files extracted.
Of course I did so but still nothing ..
Sent from my HTC Vision using xda app-developers app
jumptoin said:
Of course I did so but still nothing ..
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
hmm ok, did you extract all the files after downloading them? that's about all i can think of..
edit; and someties you have to make sure the name of the file hasn't changed since the guide was written.
And I didn't completely understand the second advice maybe my english is inappropriate or my pc knowledge is bad could u explain it a bit closely ?
Sent from my HTC Vision using xda app-developers app
sure, no problem. when you download the files in the guide, you also have to 'extract' them..... you right-click on the files and choose 'extract'... that will make them a folder instead of a zip file, and then adb will find the folder called 'fr3vo'. i hope this helps...
I didn't mean this but the second advice at first post
Sent from my HTC Vision using xda app-developers app
oh, i just meant that you can set it up so that adb will work no matter which directory you are in. in that case, in the terminal you run adb in the folder where you have fr3vo and the other files extracted. this is sort of the proper way, but i do not have mine set up this way.
unfortunately it's hard to know why adb is not finding the files.... but i'm sure you will get it to work, since you already have adb set up.
I used XP ...I could try it on w7 could it work?
Sent from my HTC Vision using xda app-developers app
i have used Windows 7 successfully. it's worth a try because just doing it over again, maybe things will fall into place properly
Ok thx for ur help ill try it and ill let u know....
Sent from my HTC Vision using xda app-developers app
Ok cool, I'm sure you'll get it. Sometimes getting adb set up can be tricky for people, but ya got that.
yogi2010 said:
Ok cool, I'm sure you'll get it. Sometimes getting adb set up can be tricky for people, but ya got that.
Click to expand...
Click to collapse
Download the pdf from www.strawmetal.minus.com it has a link to a single package for all files needed to downgrade and root your device.
Thanks bro....
Sent from my HTC Vision using xda app-developers app
omg thanks guys a did everything according to the pdf guide and now iam perma rooted ... omg youre great guys ...now cpuld u tell me what would be the best rom for me ? i want something really fast and responsible .thank u one more time guys
oh guys ive found this one looking really interesting ... http://forum.xda-developers.com/showthread.php?t=1714187 I LOVE ICS so it could be really nice ..what do you think and then another think ..how to flash this rom how i get into recovery ?
power on while holding volume down, select recovery with the power button. wipe everything (in recovery use trackpad to select and scroll) then choose flash zip and follow the op in the thread.
mimicry and elitemod are the two best ics roms I've tried latley although its been months since I used others and I'm sure more are good now as well.
still find myself using gingerbread most of the time though, try a few roms out. do nandroid backups before flashing new ones, but flash a few roms to find out what you like. in the developers section you will find a thread that has links to all of the current roms and many from the past
Sent from my HTC Vision using xda premium
sry for stupid questions but ... volume down+power ... i should use it when my phone is on or off? ... when i try it when my phone is on it does nothing
now i was just playing i wrote adb reboot recovery to command promt and it worked but i guess this is not proper way
adb reboot recovery. Is a perfect and flawless way to reboot into recovery. Its useful when a rom goes into a bootloop as removing the battery is not advisable(removing battery should be your last resort).
Edit: Don't forget to remove/delete PC10IMG.zip from your sdcard before you use the power + vol.down.
Sent from my HTC Vision using xda premium

[TUTORIAL FOR N00BS] Install drivers on windows (fastboot and adb)

Little tutorial to help everyone out
download: https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
Some pictures, step by sptep to help!
PUT YOUR PHONE ON FASTBOOT MODE AND PLUG IT TO YOUR PC! (truned off, press vol+ and power button)
READ THIS:
- at step 5 you have to browse your files and select the "usb_drivers" folder that you just downloaded then choose "Let me pick...".
- at step 6 it appear "asus android device" in my case but DONT care about that. Select "all devices". The next step is the important part.
- at step 7 click on have disk and browse to your usb_drivers folder and select "android_winusb.inf"
After this you can use commands to root, flash new recoveries, and go back to completly stock using bootloader mode on your device.
http://forum.xda-developers.com/showthread.php?t=895545 (FULL TUTORIAL)
http://forum.xda-developers.com/showthread.php?t=882815 (BIG FAQ)
Maybe all noobs need to read the BIG FAQ
kwibis said:
http://forum.xda-developers.com/showthread.php?t=895545 (FULL TUTORIAL)
http://forum.xda-developers.com/showthread.php?t=882815 (BIG FAQ)
Maybe all noobs need to read the BIG FAQ
Click to expand...
Click to collapse
dont be hater, i just wanted to make a thread more specific to this problem cuz sometimes its hard to find the awnser on those large thread
or you could just boot your device into download mode and plug it in....no downloading from any SHADY file hosts that force you to use their downloader, and no confusing instructions....boot to download mode, plug your phone in, then wait.
Thats a good ideia too, but anyways... u can wathever drivers u want from who u want. This tutorial was mainly fpcused on new people arriving to our world!
sent from my Nyan NeXus S
"You're either NEXUS or against us!"
Sorry, didn't mean to be a hater lol. But there is that faq with all the stuff you need to know to start up.
Sent from my Nexus S
Hi I am getting trouble moving beyond step 5 this is what i get :
Windows 8 is not able to install Android 1.0 as it was not able to find the drivers. I also included the subfolders but its still giving me the same error.
Any suggestions to go around this?
After chosing the folder did u downloaded the all zip file? Did u unzip it after?
sent from my Nyan NeXus S
"You're either NEXUS or against us!"
EDIT
just click let me pick instead of next
Cascabreu said:
After chosing the folder did u downloaded the all zip file? Did u unzip it after?
sent from my Nyan NeXus S
"You're either NEXUS or against us!"
EDIT
just click let me pick instead of next
Click to expand...
Click to collapse
Hello, I have the same problem as eddyed911, I get the same message when trying to install the drivers by following your procedure: "Windows could not find the driver software for your device."
To answer your question for him, I did unzip the file. Any ideas?
radinfinitum said:
Hello, I have the same problem as eddyed911, I get the same message when trying to install the drivers by following your procedure: "Windows could not find the driver software for your device."
To answer your question for him, I did unzip the file. Any ideas?
Click to expand...
Click to collapse
Choose let me pick and select the drivers folder
Sent from my GT-I9100 using xda app-developers app
kwibis said:
http://forum.xda-developers.com/showthread.php?t=895545 (FULL TUTORIAL)
http://forum.xda-developers.com/showthread.php?t=882815 (BIG FAQ)
Maybe all noobs need to read the BIG FAQ
Click to expand...
Click to collapse
thanks pals for that, i need that tutoreial so much!
I don't know if this is because it was already installed or what (I've had to work with several other Android phones for a project I'm involved with) but I couldn't get the zip to install either (are they Win8 drivers C4SCA? Didn't work on Win7 64bit). What I did do was select the device driver manually. Once in the driver list select Android Phone and then Android Bootloader Interface. In my case it listed Acer and Google so be sure to select Google if you have any options. Worked fine after that.
updated OP with google's nexus drivers download link
redmi note hmw 1 bootloader unlock tool required
hi all can any one help me in unlocking boot loader redmi note HM W1 fastboot symbol not comming
hero75 said:
hi all can any one help me in unlocking boot loader redmi note HM W1 fastboot symbol not comming
Click to expand...
Click to collapse
Better ask on a redmi note thread/forum
Has anyone successfully unlocked their bootloader using the above described method. Would like to hear feedback ...Thank You

Bricked my Huawei U8800 Need HELP

Hello Guys,
I have a BIG problem.
I rooted my Huawei U8800 and installed Aurora for it.
Than I tried to update my CWM. After that nothing worked.
When I start my phone I get a BlueScreen. When I connect it to Windows 7 in PinkScreen nothing happens.
Ubuntu also doesnot recognize him. I tried 100 times to update the firmware but it always stops at 1/4 of the progress bar.
We tried many SD Cards and many computers.
Slowly I dispair....
Have someone an idea?!?
What can i do?!?!
Hope for Replys and Suggestions.
Thank U
Maggi_Devo said:
Hello Guys,
I have a BIG problem.
I rooted my Huawei U8800 and installed Aurora for it.
Than I tried to update my CWM. After that nothing worked.
When I start my phone I get a BlueScreen. When I connect it to Windows 7 in PinkScreen nothing happens.
Ubuntu also doesnot recognize him. I tried 100 times to update the firmware but it always stops at 1/4 of the progress bar.
We tried many SD Cards and many computers.
Slowly I dispair....
Have someone an idea?!?
What can i do?!?!
Hope for Replys and Suggestions.
Thank U
Click to expand...
Click to collapse
Flash a stock ROM and them restore backup if any.
Sent from my U8800pro using xda premium
Somcom3X said:
Flash a stock ROM and them restore backup if any.
Sent from my U8800pro using xda premium
Click to expand...
Click to collapse
Thank you for your reply.:good:
I did that many time .
I used many different stock roms.
None of them worked.
I have many backups but i cant use them if there is no OS.
Or is there another Stock Rom you mean from that I did not know?!
Is there any other ways to restore the device?!
Thank you for ur answer.
Maggi_Devo
Maggi_Devo said:
Thank you for your reply.:good:
I did that many time .
I used many different stock roms.
None of them worked.
I have many backups but i cant use them if there is no OS.
Or is there another Stock Rom you mean from that I did not know?!
Is there any other ways to restore the device?!
Thank you for ur answer.
Maggi_Devo
Click to expand...
Click to collapse
Try to go to "pink screen" then follow the next instructions:
dropbox.com/sh/s8ajc8a8vv5r3sa/gWY2azAXHE/u8800-51%20ROM%20Flashing%20Tools
In the "back to stock" folder, that's worked for me
(Yes you have to install an "3.9gb" img on your device)
Maggi_Devo said:
Hello Guys,
I have a BIG problem.
I rooted my Huawei U8800 and installed Aurora for it.
Than I tried to update my CWM. After that nothing worked.
When I start my phone I get a BlueScreen. When I connect it to Windows 7 in PinkScreen nothing happens.
Ubuntu also doesnot recognize him. I tried 100 times to update the firmware but it always stops at 1/4 of the progress bar.
We tried many SD Cards and many computers.
Slowly I dispair....
Have someone an idea?!?
What can i do?!?!
Hope for Replys and Suggestions.
Thank U
Click to expand...
Click to collapse
----------->http://forum.xda-developers.com/showthread.php?t=1728065
----------->http://forum.xda-developers.com/showthread.php?t=1560372&highlight=update+fail+on+step+2+of+2
----------->http://www.mediafire.com/?1hbk6n46hgamyt6
download and flash
Thank you but...
carlosedt said:
Try to go to "pink screen" then follow the next instructions:
dropbox.com/sh/s8ajc8a8vv5r3sa/gWY2azAXHE/u8800-51%20ROM%20Flashing%20Tools
In the "back to stock" folder, that's worked for me
(Yes you have to install an "3.9gb" img on your device)
Click to expand...
Click to collapse
I'm really impressed by ur good suggestions. :good:
Thank You all.
A question to your solution.
So if I connect my Huawei U8800 device to my pc he does not regocnize the device so i can not select it as physical drive.
This is one problem. Do you have any solutions for this ?!
Thanks for you help.
Maggi_Devo
nikosddesign said:
----------->http://forum.xda-developers.com/showthread.php?t=1728065
----------->http://forum.xda-developers.com/showthread.php?t=1560372&highlight=update+fail+on+step+2+of+2
----------->http://www.mediafire.com/?1hbk6n46hgamyt6
download and flash
Click to expand...
Click to collapse
These links did not help me a lot.
I've seen this post before(not the chinese) and i buyed a 512 MB SD card but it did not work.
The progress bar stoped at 1/4 of it again.
Maybe I made something wrong but I could not download the file from mediafire.
It was something like a programm and I did not understand how to download the file from it.
Perhaps you know what to do?!
Thanks anyway for your help:good:
Maggi_Devo
Maggi_Devo said:
These links did not help me a lot.
I've seen this post before(not the chinese) and i buyed a 512 MB SD card but it did not work.
The progress bar stoped at 1/4 of it again.
Maybe I made something wrong but I could not download the file from mediafire.
It was something like a programm and I did not understand how to download the file from it.
Perhaps you know what to do?!
Thanks anyway for your help:good:
Maggi_Devo
Click to expand...
Click to collapse
Follow the instructions inside the folder.
You have to press "Vol. + and -" with Power like 3-4sec. to get the pink screen, your pc will recognize the phone
Maggi_Devo said:
I'm really impressed by ur good suggestions. :good:
Thank You all.
A question to your solution.
So if I connect my Huawei U8800 device to my pc he does not regocnize the device so i can not select it as physical drive.
This is one problem. Do you have any solutions for this ?!
Thanks for you help.
Maggi_Devo
Click to expand...
Click to collapse
do you have the correct phone drivers installed in your PC?
Windows 7 failed
carlosedt said:
Follow the instructions inside the folder.
You have to press "Vol. + and -" with Power like 3-4sec. to get the pink screen, your pc will recognize the phone
Click to expand...
Click to collapse
This is not the problem.
I can easily achieve the pink screen and my pc regonizes him, but if he tries to install the HUAWEI TECHNOLOGIES drivers he fails.
So the programm also does not recognize the device.
This is my problem in your instruction.
:good:
Thanks anyway
uumeshh said:
do you have the correct phone drivers installed in your PC?
Click to expand...
Click to collapse
I hope so but I think I might did something wrong.
http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=Mzk1MzA=
This is the driver which I installed. That rights is it not?
Thanks for your help
Maggi_Devo
- if you want to do a restoring from image 3.8gb you must be on LINUX operating system.(safety and effectively)
Good luck
Sent from my U8800PRO using xda app-developers app
Yeah Linux...
gyankamp1 said:
- if you want to do a restoring from image 3.8gb you must be on LINUX operating system.(safety and effectively)
Good luck
Sent from my U8800PRO using xda app-developers app
Click to expand...
Click to collapse
Thank you for ur help.
I installed many Linux systems...
Ubuntu
LinuxMint
... and all of them "saw" the device but they could not load the 3,9 gb firmware.
If you know what I can do I would be thankful
We got this log:
-----------------------------------------------------------------------------------------------------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1035 Rev= 0.00
S: Manufacturer=HUAWEI, Incorporated
S: Product=HUAWEI Technologies
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
---------------------------------------------------------------------------------------------------------------
(Maybe that will help you )
Thanks
Maggi_Devo
Well, I can give some instractions but there is a issue.If emmc backup isn't from your specific device then you will lost wifi and IMEI.Because of that you must do as a last chance(...)
As I can understand your phone is in locked bootloader (pink screen) state additionally some file on it crash.
Its better flashing B512 has unlocked bootloader.Don't care if stops after 1 step or not.Just flash it and then go in pink screen.Then connect it On your windows os and copy paste pink screen files from your CWM backups.(unzip boot.fat.tar).
Afterwards pull out battery disconnect USB, reconnect battery and go to cwm (...)
Sent from my U8800PRO using xda app-developers app
Battery is empty
gyankamp1 said:
Well, I can give some instractions but there is a issue.If emmc backup isn't from your specific device then you will lost wifi and IMEI.Because of that you must do as a last chance(...)
As I can understand your phone is in locked bootloader (pink screen) state additionally some file on it crash.
Its better flashing B512 has unlocked bootloader.Don't care if stops after 1 step or not.Just flash it and then go in pink screen.Then connect it On your windows os and copy paste pink screen files from your CWM backups.(unzip boot.fat.tar).
Afterwards pull out battery disconnect USB, reconnect battery and go to cwm (...)
Sent from my U8800PRO using xda app-developers app
Click to expand...
Click to collapse
Thank you for your fast reply.
So you think I should do this:
1. Flash B512 (If is stops of not unimportant)
2. Go connect in Pink Screen on Windows
3. Copy the files in the image foldner.
4. Pull out battery
5. Disconnect USB
6. Reconnect battery and go to CWM...
Ok I will try this but there is a little problem. I cant start my device without USB cable because the battery is empty and I cant charge it.
Anyway thanks
Maggi_Devo
Correct .
Sent from my U8800PRO using xda app-developers app
gyankamp1 said:
Correct .
Sent from my U8800PRO using xda app-developers app
Click to expand...
Click to collapse
Where can I find the B512?!
I only find the B518 bootloader file
http://forum.xda-developers.com/showthread.php?t=1457490
----------------------------------------
Edit:
When I try to copy the 3,89 gb File on the device i have to problems.
Ubuntu says:
Huawei Incoporated /dev/ttyUSB0
Huawei Incoporated /dev/ttyUSB1
When I try:
sudo dd if=huawei.bin of=/dev/ttyUSB1
The device goes from pink into blue screen or it just went off.
B512 ROM (dload folder) there is I thing one copy in a drop box from a xda member.
I know people whose played with "if ....then" command and make the phone just a plastic box.you must ABSOLUTELY sure what you are doing with this.
Sent from my U8800PRO using xda app-developers app
I have no PRO
gyankamp1 said:
B512 ROM (dload folder) there is I thing one copy in a drop box from a xda member.
I know people whose played with "if ....then" command and make the phone just a plastic box.you must ABSOLUTELY sure what you are doing with this.
Sent from my U8800PRO using xda app-developers app
Click to expand...
Click to collapse
Status:
I found this page:
http://forum.xda-developers.com/showthread.php?t=1671527
They have MANY Roms but not the B512 Rom.
I know the Dropbox Link you said but I can find it anymore
Maybe you could find it.
There is only the B512 for the Huawei U8800 PRO.
Not for the U8800.
?!
http://www.mediafire.com/?8mspvk1l0lk2d
Download b518beta
Unzip
Copy/ paste dload on sdcard
If exist step1,2,3 then copy first the UPDATE.APP FROM STEP1 only on dload folder and do the update procedure. Then do the same for next steps.
Sent from my U8800PRO using xda app-developers app

[Q] Phone has a wierd rom can't get the drivers working on the computer

Hi this is my first thread and i really dont know how this works but heres the problem
i bought a nexus 4 16gb from a guy on craigslist and it has a wierd rom in it, it is still 4.2 and i am unable to get updates on it. i browsed around and landed on a forum that said about it being some kind of debugger/developers rom that google uses. i dont have a lot of feature i can't connect it to computer to root it and neither can i transfer file from computer for exaple music or pictures.
The build number is:
full_mako-userdebug 4.2 lgep19
eng.seungju24.choi.20121114.105751 test-keys
If you want your phone back to stock and unroot you'll need to access a PC and follow this guide.
http://forum.xda-developers.com/showthread.php?t=2010312
This will put the phone how it comes out of the box. Otherwise if rooted and has custom recovery why not stay rooted and flash different 4.2.1 roms?
Sent from my Nexus 4 using xda premium
---------- Post added at 07:28 PM ---------- Previous post was at 07:26 PM ----------
Also this video will help too. He has a folder for download with everything you need.
All you need is to type in commands.
https://www.youtube.com/watch?v=2Se0N86qsJE&feature=youtube_gdata_player
Sent from my Nexus 4 using xda premium
What os do you have on your computer?
Sent from my Nexus 4 using xda app-developers app
1) That's a Debug ROM
2) It shouldn't be used as an actual ROM. Download this: https://docs.google.com/uc?id=0B_zuNWpIf1ujNlFDVnZ3dzg2WEU&export=download
3) Extract it.
4) Turn off your phone, then hold Power and Volume Down. When you see the Android on it's back, connect the phone to the computer and run the flash-all.bat in the folder.
5) Wait and then you're done.
Not working
rr5678 said:
1) That's a Debug ROM
2) It shouldn't be used as an actual ROM. Download this:
3) Extract it.
4) Turn off your phone, then hold Power and Volume Down. When you see the Android on it's back, connect the phone to the computer and run the flash-all.bat in the folder.
5) Wait and then you're done.
Click to expand...
Click to collapse
It is giving me a error message
" fastboot" is not recongnized as an internal or external command, operable program or batch file.
irfan9490 said:
It is giving me a error message
" fastboot" is not recongnized as an internal or external command, operable program or batch file.
Click to expand...
Click to collapse
Oh yeah, you don't have the Android SDK installed, do you? Well download and install this: http://dl.google.com/android/installer_r21.0.1-windows.exe
It still isn't working
rr5678 said:
Oh yeah, you don't have the Android SDK installed, do you? Well download and install this:
hey thanks for your reply i have tried it with the android SDK but it still isn't working. i would really appreciate if you could help me thanks you.
Click to expand...
Click to collapse
irfan9490 said:
rr5678 said:
Oh yeah, you don't have the Android SDK installed, do you? Well download and install this:
Click to expand...
Click to collapse
hey thanks for your reply i have tried it with the android SDK but it still isn't working. i would really appreciate if you could help me thanks you.
Click to expand...
Click to collapse
Are the drivers installed or does it say unknown device?
If the drivers are installed, copy fastboot.exe from the attachment and put it in the same folder as flash-all.bat
ANother Error
rr5678 said:
Are the drivers installed or does it say unknown device?
If the drivers are installed, copy fastboot.exe from the attachment and put it in the same folder as flash-all.bat
Click to expand...
Click to collapse
Now there is another error that says the AdbWin.Api.dll is missing. Really sorry for bothering you again and again but the phone really lags and i paid almost 500 for it like 2 weeks ago and now they have it in stock. if i could fix it i would feel better about spending my hard earned money
irfan9490 said:
Now there is another error that says the AdbWin.Api.dll is missing. Really sorry for bothering you again and again but the phone really lags and i paid almost 500 for it like 2 weeks ago and now they have it in stock. if i could fix it i would feel better about spending my hard earned money
Click to expand...
Click to collapse
Okay, try adding these to the same directory.
Still not working.
rr5678 said:
Okay, try adding these to the same directory.
Click to expand...
Click to collapse
Thanks for the help it cleared the .dll error but i have attached the screenshots of what i got as it did not change the rom.
irfan9490 said:
Thanks for the help it cleared the .dll error but i have attached the screenshots of what i got as it did not change the rom.
Click to expand...
Click to collapse
open a command prompt in that directory and type fastboot oem unlock. then try again
Thanks you very much it works a lot better
now.
Sent from my Nexus 4 using xda app-developers app
rr5678 said:
1) That's a Debug ROM
2) It shouldn't be used as an actual ROM. Download this: https://docs.google.com/uc?id=0B_zuNWpIf1ujNlFDVnZ3dzg2WEU&export=download
3) Extract it.
4) Turn off your phone, then hold Power and Volume Down. When you see the Android on it's back, connect the phone to the computer and run the flash-all.bat in the folder.
5) Wait and then you're done.
Click to expand...
Click to collapse
I am VERY thankful for this thread. It helped me rid a company phone of that garbage Debug ROM. Thank you very much!

Categories

Resources