Please I really need some help! I think I've totally killed my nexus 10
I can get to fast boot but cannot flash anything. As soon as I try and say flash TWRP I get "FASTBOOT STATUS - DATA005fe000".
I've tried using the stock firmware and using flash-all.bat but get the same issue. The erase commands work, but then command to flash the boot loader gets the same issue.
I'm hoping I'm going to get flamed for not searching, 'cause that means I've missed something, but I've tried to search to no avail.
PLEASE HELP!!!!
kipperfish said:
Please I really need some help! I think I've totally killed my nexus 10
I can get to fast boot but cannot flash anything. As soon as I try and say flash TWRP I get "FASTBOOT STATUS - DATA005fe000".
I've tried using the stock firmware and using flash-all.bat but get the same issue. The erase commands work, but then command to flash the boot loader gets the same issue.
I'm hoping I'm going to get flamed for not searching, 'cause that means I've missed something, but I've tried to search to no avail.
PLEASE HELP!!!!
Click to expand...
Click to collapse
How did you got to that "state"? You should try using WugFresh toolkit.
lKBZl said:
How did you got to that "state"? You should try using WugFresh toolkit.
Click to expand...
Click to collapse
That's how I got into this mess! I tried to unlock and then root my tablet.
It rebooted and wouldn't pass the nexus X logo.
Now I can't flash anything.
In the Nexus Root Toolkit it says that if all goes wrong try Odin.
I've downloaded a version (I'm familiar with it from my Galaxy S), and got the drivers working... does anyone know where I can download the tar files?
kipperfish said:
That's how I got into this mess! I tried to unlock and then root my tablet.
It rebooted and wouldn't pass the nexus X logo.
Now I can't flash anything.
Click to expand...
Click to collapse
Did you get a chance to do the first twrp factory data reset? If not you may be able to boot into recovery mode and try a manual factory reset..
If your tablet is on, power it off.
Press and hold Volume Up + Volume Down + Power until the device powers on. You should see an image of an Android lying on its back.
Press Volume Down twice, until the screen says "Recovery mode."
Press Power to restart into "Recovery mode." You should see an image of an Android with a Red triangle after a few minutes.
While holding down Power, tap Volume Up
Use the volume keys to scroll to "wipe data/factory reset" and press Power to select it
Scroll down to "Yes - erase all user data" and press Power to select it
for some reason with wugfresh the first twrp factory reset failed on 2 out of 3 tests. I had do just do the manual factory reset above and all was well. Good luck! :good:
midgetzombiekiller said:
Did you get a chance to do the first twrp factory data reset? If not you may be able to boot into recovery mode and try a manual factory reset..
If your tablet is on, power it off.
Press and hold Volume Up + Volume Down + Power until the device powers on. You should see an image of an Android lying on its back.
Press Volume Down twice, until the screen says "Recovery mode."
Press Power to restart into "Recovery mode." You should see an image of an Android with a Red triangle after a few minutes.
While holding down Power, tap Volume Up
Use the volume keys to scroll to "wipe data/factory reset" and press Power to select it
Scroll down to "Yes - erase all user data" and press Power to select it
for some reason with wugfresh the first twrp factory reset failed on 2 out of 3 tests. I had do just do the manual factory reset above and all was well. Good luck! :good:
Click to expand...
Click to collapse
+1, exactly what I was thinking, you have to do a wipe data after unlocking in some cases.
Press and hold Volume Up + Volume Down + Power until the device powers on. You should see an image of an Android lying on its back.
Click to expand...
Click to collapse
Yes
Press Volume Down twice, until the screen says "Recovery mode.
Click to expand...
Click to collapse
Yes
Press Power to restart into "Recovery mode." You should see an image of an Android with a Red triangle after a few minutes.
Click to expand...
Click to collapse
I just get a black screen
While holding down Power, tap Volume Up
Use the volume keys to scroll to "wipe data/factory reset" and press Power to select it
Scroll down to "Yes - erase all user data" and press Power to select it
Click to expand...
Click to collapse
By using 4.2.0 (rather than 4.2.2) and trying the flash stock and unroot option I can now install CWM or TWRP as a boot loader.
I installed CWM and did a factory reset, then retried the above. This got the data error when installing system and then when finished got a file veririfcation error in the fastboot status. When I reboot I just get the Google logo and the unlock at the bottom.
kipperfish said:
Yes
Yes
I just get a black screen
By using 4.2.0 (rather than 4.2.2) and trying the flash stock and unroot option I can now install CWM or TWRP as a boot loader.
I installed CWM and did a factory reset, then retried the above. This got the data error when installing system and then when finished got a file veririfcation error in the fastboot status. When I reboot I just get the Google logo and the unlock at the bottom.
Click to expand...
Click to collapse
Wow i haven't had my n10 long enough to help you much more. Sounds like you might have some corrupt files from wugrfresh download/install? Maybe download from another mirror and try again? good luck !!!! Keep me posted!
Re: [Q] Bricked my nexus 10!
Not to be rude or anything but toolkits are the devil when it comes to Nexus devices. They are so easy to root and ROM that anyone can do it. Toolkits encourage ignorance to what and how things are getting done.
For starters go Google the fastboot files for the Nexus 10. Google Fastboot.exe and add it to your system folder on windows if you are using such.
Extract the downloaded "manta....." File and then extract the zip file contained.
From here make sure you are in your boot loader and type "fastboot devices" ensure your serial shows.
Then one by one go into the extracted folder and erase then flash each partition EXCEPT the bootloader. Don't mess with that at this point. After flashing the recovery, system, boot and data files reboot into the recovery and perform a factory reset. It should boot from this point.
On Manta, you MUST do a factory reset after flashing the data partition or unlocking the device. For some reason it fails to boot without performing that step.
Sent from my Nexus 10 using Tapatalk HD
altimax98 said:
Not to be rude or anything but toolkits are the devil when it comes to Nexus devices. They are so easy to root and ROM that anyone can do it. Toolkits encourage ignorance to what and how things are getting done.
For starters go Google the fastboot files for the Nexus 10. Google Fastboot.exe and add it to your system folder on windows if you are using such.
Extract the downloaded "manta....." File and then extract the zip file contained.
From here make sure you are in your boot loader and type "fastboot devices" ensure your serial shows.
Then one by one go into the extracted folder and erase then flash each partition EXCEPT the bootloader. Don't mess with that at this point. After flashing the recovery, system, boot and data files reboot into the recovery and perform a factory reset. It should boot from this point.
On Manta, you MUST do a factory reset after flashing the data partition or unlocking the device. For some reason it fails to boot without performing that step.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Yeah after my experience with toolkits I have leaned that the google sdk fastboot is the best method and you also learn the fastboot/adb commands and what's actually happening step by step.
midgetzombiekiller said:
Wow i haven't had my n10 long enough to help you much more. Sounds like you might have some corrupt files from wugrfresh download/install? Maybe download from another mirror and try again? good luck !!!! Keep me posted!
Click to expand...
Click to collapse
Ok, given all the feedback, especially with regards to corrupt items, I dug out an old laptop and was still getting the same problems, re-downloaded the 4.2.2 image and tried again.... and was more patient this time, and voila! back up and running!
Thanks to everyone who replied, I would not have persevered without your comments.
Lessons learned:
1) On Manta, you MUST do a factory reset after flashing the data partition or unlocking the device. For some reason it fails to boot without performing that step.
2) For me the downloads seem to have been unreliable, try, re-try, cry, weep, try again, punch the desk until your knuckles bleed, try some more and eventually you'll get there!
3) Be VERY patient. I was less patient than my normal impatient self when I saw how super lightning fast the N10 is.
Thanks again to everyone.
kipperfish said:
Ok, given all the feedback, especially with regards to corrupt items, I dug out an old laptop and was still getting the same problems, re-downloaded the 4.2.2 image and tried again.... and was more patient this time, and voila! back up and running!
Thanks to everyone who replied, I would not have persevered without your comments.
Lessons learned:
1) On Manta, you MUST do a factory reset after flashing the data partition or unlocking the device. For some reason it fails to boot without performing that step.
2) For me the downloads seem to have been unreliable, try, re-try, cry, weep, try again, punch the desk until your knuckles bleed, try some more and eventually you'll get there!
3) Be VERY patient. I was less patient than my normal impatient self when I saw how super lightning fast the N10 is.
Thanks again to everyone.
Click to expand...
Click to collapse
Glad to hear it worked out. I found out that wipe step the hard way.
Use the MD5 to verify your downloads if you have any doubts, i personally haven't had any failures
Sweet!
Sent from my Nexus 10 using xda premium
Related
I tried downloading 2.3.1 through rom manager, but it failed for some reason. So I accidentally downloaded it through the phone, and as soon as it began installing, I got a little Android image with a triangle that has an ! in it...How can i please fix this?
edit:i tried holding down the up and power keys with no luck...someone please help
monkeytuner said:
I tried downloading 2.3.1 through rom manager, but it failed for some reason. So I accidentally downloaded it through the phone, and as soon as it began installing, I got a little Android image with a triangle that has an ! in it...How can i please fix this?
edit:i tried holding down the up and power keys with no luck...someone please help
Click to expand...
Click to collapse
You might get more help if you rename your topic title to something more descriptive.
Second, try searching the forum; this has been discussed in numerous threads on both this forum and the developer's section, along with how to fix it.
Try the threads about the update, or dialing a certain code to force it manually (that's where I learned the timing trick to get into stock recovery on the NS). On the screen you're at, try pressing and holding power, then pressing/holding volume up, that should get you into stock recovery.
Also, if you can get into fastboot, you can fastboot flash the CWM recovery back to the device. If you made an nandroid before doing anything, you can at least go back to the device's state before you tried the update.
i could not find anything on this issue on google or here
i tried doing vol up and power, but its still at the screen, and my computer doesnt recognize my phone
use the instruction on the topic to ROOT the phone
http://forum.xda-developers.com/showthread.php?t=875875
and in one of the steps you can use the ADB to push a good ROM back into the phone to be re-flashed
Try just pulling the battery.
If not, you'll have to use fast boot from the SDK. Just follow the howto at the top of this forum to flash original images.
thank you so much!
i locked my bootloader again, and i've been trying to get the 2.3.1 update, but everytime i do try, it freezes at the android warning sign. i also tried installing it via rommanager when i was rooted...whats going on?
any ideas what could be wrong?
monkeytuner said:
i could not find anything on this issue on google or here
i tried doing vol up and power, but its still at the screen, and my computer doesnt recognize my phone
Click to expand...
Click to collapse
monkeytuner said:
any ideas what could be wrong?
Click to expand...
Click to collapse
Are you able to get into Fastboot?
I wonder if part of your problem is that you relocked the bootloader. (Why'd you do that anyways? No advantage, imo.)
Fastboot oem unlock will completely wipe your phone, I mean WIPE EVERYTHING, including the sdcard (photos, music, some apps' data, etc), but such a wipe might get you back to stock firmware and stock recovery, then at least you could boot up. You could also then reflash CWM.
Before doing that, let's try this if you haven't:
Turn off phone.
Hold vol-up, then press/hold power.
You should then be in fastboot mode.
The timing's critical (on my phone anyways) for this step: Select recovery, and have your hands on the power button and volume button ready to push.
Watch the screen very closely, for a bout a half second or so, the screen will flash a box with an arrow dumping out onto the android dude. While that screen is showing, press/hold the power button, then press/hold the vol up button. Important to do the power button FIRST this time (at least it is on my phone).
You should then be able to get into the stock recovery.
Once there, maybe we can figure out where to go, but we need to know how messed up your phone is at this point.
Once in Recovery, you could try wiping cache if it's an option, then trying to reboot. Worth a shot, but not likely to work.
You could also do the factory reset wipe in there, this one shouldn't wipe your sdcard if there's anything critical/valuable on it. It will reset all your settings and logins and wipe the apps you've installed, though. Again, might let you boot up normally.
I'm running Paranoid Android 2.1 which is based on CM10. So I decided it would be a good idea to encrypt it. NOT anymore.
Everytime I try to wipe the data/factory reset it in the recovery menu it says.
"Formatting /data...
Error mounting /data!
Skipping format...
BLAHBLAHBLAH
Formatting /sdcard/.android_secure...
Error mounting /sdcard/.android_secure!
Skipping format..."
I can't install any ROMs or anything.
I really really need help.
After several hours of searching and frustration. I have FINALLY fixed it.
Dude. You can't throw that out there and leave the internet hanging. What did you do to solve the issue?
Sent from my Nexus 7 using Tapatalk 2
Yeah, encrypted devices is one of the many things CWM is too stupid to handle.
Use original, stock recovery for wiping / factory reset.
Alternatively you can try going to "Mounts and Storage" in CWM and manually select "format /data", that should do the trick as well.
HellcatDroid said:
Alternatively you can try going to "Mounts and Storage" in CWM and manually select "format /data", that should do the trick as well.
Click to expand...
Click to collapse
Actually that didn't work.
Here's how I did it, which is what you said. I did a lot of things to try to fix it. I used the Nexus 7 Toolkit to install the stock boot image. Then I booted into fastmode by holding the plus and minus sound buttons then powering on the device. Then I hit the sound buttons til you see recovery menu. Hit the power button and then it will say Google for a bit, around 5 minutes for me. Then it'll show an android with a red triangle. Hold the power button and hit the plus volume key. Then go down to "Factory reset" and hit the power button. That fixed it. From there I was easily able to get back to using Motly kernal with Paranoid Android.
Nexus Last option is Facroy Stock install
Just fallow the following link it will solve all your problems:
forums.androidcentral.com/nexus-7-rooting-roms-hacks/191477-guide-factory-image-restore-your-nexus-7-a.html
forums.androidcentral.com/nexus-7-rooting-roms-hacks/191477-guide-factory-image-restore-your-nexus-7-a.html
forums.androidcentral.com/nexus-7-rooting-roms-hacks/191477-guide-factory-image-restore-your-nexus-7-a.html
forums.androidcentral.com/nexus-7-rooting-roms-hacks/191477-guide-factory-image-restore-your-nexus-7-a.html
Just fallow the above link it will solve all your problems.
Knightsofwar210 said:
Actually that didn't work.
Here's how I did it, which is what you said. I did a lot of things to try to fix it. I used the Nexus 7 Toolkit to install the stock boot image. Then I booted into fastmode by holding the plus and minus sound buttons then powering on the device. Then I hit the sound buttons til you see recovery menu. Hit the power button and then it will say Google for a bit, around 5 minutes for me. Then it'll show an android with a red triangle. Hold the power button and hit the plus volume key. Then go down to "Factory reset" and hit the power button. That fixed it. From there I was easily able to get back to using Motly kernal with Paranoid Android.
Click to expand...
Click to collapse
Thanks a lot buddy.. I am able to get rid of my encryption now. I reached to a point where I had no OS, no recovery in my phone and I was damm scared that I have bricked it.. but eventually I was able to install stock ROM and recovery... Its running fine now...
justvarshney said:
Thanks a lot buddy.. I am able to get rid of my encryption now. I reached to a point where I had no OS, no recovery in my phone and I was damm scared that I have bricked it.. but eventually I was able to install stock ROM and recovery... Its running fine now...
Click to expand...
Click to collapse
Hey no problem. I am never encrypting my android device ever again. They make it way too difficult to get rid of.
Ok, I flashed Trinity kernel with no issues, phone booted up ran great. Then I pushed PA to my phone to flash using the Nexus Root Toolkit and when it rebooted me into TWRP, I proceeded to wipe sys and dalvik and try to flash the zip. It failed. No big deal, some of my flashes have failed before on this N7. Not sure why, but I usually just reboot and press on. This time however, as it starts to boot I get a msg saying "unfortunately Setup Wizard has stopped" with an "ok" button, but when I press the "ok" button it just cycles back to the same button. I have tried powering down, but the Ok button sits on top of the power off confirmation button and so I can't even turn it off to reboot into recovery mode. Anyone got any suggestions? The toolkit won't seem to reboot it into recovery either, not sure why unless the ok button is overriding everything. Help?
UPDATE: I managed to get the trick of hitting the ok button fast enough to get to the power confirm button behind it, but when I boot it into recovery mode, I get the droid with the red ! mark and can't seem to get it to do anything else. I have tried booting into recovery from Toolkit, but it says I need to put it into USB debugging mode, which of course I can't do because I can't get past the failed setup...
UPDATE: Ok, I have managed to finagle it into resetting to factory stock ROM. So I have it up and running again and just have to start from scratch. But at least I am able to.
How'd ya do that
Lazarus416 said:
Ok, I flashed Trinity kernel with no issues, phone booted up ran great. Then I pushed PA to my phone to flash using the Nexus Root Toolkit and when it rebooted me into TWRP, I proceeded to wipe sys and dalvik and try to flash the zip. It failed. No big deal, some of my flashes have failed before on this N7. Not sure why, but I usually just reboot and press on. This time however, as it starts to boot I get a msg saying "unfortunately Setup Wizard has stopped" with an "ok" button, but when I press the "ok" button it just cycles back to the same button. I have tried powering down, but the Ok button sits on top of the power off confirmation button and so I can't even turn it off to reboot into recovery mode. Anyone got any suggestions? The toolkit won't seem to reboot it into recovery either, not sure why unless the ok button is overriding everything. Help?
UPDATE: I managed to get the trick of hitting the ok button fast enough to get to the power confirm button behind it, but when I boot it into recovery mode, I get the droid with the red ! mark and can't seem to get it to do anything else. I have tried booting into recovery from Toolkit, but it says I need to put it into USB debugging mode, which of course I can't do because I can't get past the failed setup...
UPDATE: Ok, I have managed to finagle it into resetting to factory stock ROM. So I have it up and running again and just have to start from scratch. But at least I am able to.
Click to expand...
Click to collapse
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
jasonmrouse said:
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
Click to expand...
Click to collapse
Hold all three hardware buttons for 30 seconds and the device reboots to the bootloader. Then, fastboot flash the stock image.
jasonmrouse said:
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
Click to expand...
Click to collapse
You can get to the bootloader (fastboot mode) FROM ANY STATE.
Read that again - from any state.
See "bootloader interrupt" in this thread:
[REF] Nexus 7 Button Combinations
cheers
I think I bricked my brand new Nexus 4 I was trying to follow the rooting directions here:
http://forum.xda-developers.com/showthread.php?t=1993331
I was using the Clokcworkmod and I was unable to see the super su folder in the sd connection. and i rebooted it anyways. Now after reboot the phone doesnt start up It just hangs at the X symbol at the startup.
As suggested, I also tried to reboot recovery, which also hangs
I'm super new to this, anybody, please help
I need 10 posts before I can post in the developer thread...so posting away
getsky said:
I need 10 posts before I can post in the developer thread...so posting away
Click to expand...
Click to collapse
Just start again, sometimes it messes up, but you generally just start again with flashing the clockworkmod. Make sure the download wasnt corrupted by doanloading everything again though, although ignore the bit about adb rboot bootloader, you need to start the phone manually by use power + volume-down key combination to get into bootloader when its powered off and continue from point 5.
Thanks, I will give that a try
Ya dun goofd
Sent from my Nexus 4 using Tapatalk 2
getsky said:
Thanks, I will give that a try
Click to expand...
Click to collapse
Relac, its actually pretty hard to completely bust these things. Dont quote me on that though lol
Don't freak out. I'm sure you're fine.
Unlocking the bootloader on my N10 caused me to hang at the X. Wiping data fixed it for me. Try the following:
1. Reboot into Fast Boot
2. Select Recovery using volume rocker. Hit power to select. You'll get the android mascot with the red exclamation point.
4. Press Power and Volume Up at the same time.
5. Choose to wipe all data. Confirm the selection.
6. Reboot.
TheBishopOfSoho said:
Just start again, sometimes it messes up, but you generally just start again with flashing the clockworkmod. Make sure the download wasnt corrupted by doanloading everything again though, although ignore the bit about adb rboot bootloader, you need to start the phone manually by use power + volume-down key combination to get into bootloader when its powered off and continue from point 5.
Click to expand...
Click to collapse
So I didn't originally flash the recovery image, just booted into it. So I tried that again, but there is nowhere to find the SU_BusyBox_Pack.zip. I tried the sideload method, but ADB can't find my device any more. It shows nothing when I do adb devices.
what else can I try ?
Were you able to try wiping data through the stock recovery?
Sent from my Nexus 10 using XDA Premium HD app
getsky said:
So I didn't originally flash the recovery image, just booted into it. So I tried that again, but there is nowhere to find the SU_BusyBox_Pack.zip. I tried the sideload method, but ADB can't find my device any more. It shows nothing when I do adb devices.
what else can I try ?
Click to expand...
Click to collapse
I got stuck after just booting into recovery as well and immediately exit. Just use the volume key and change it until you see recovery, without going into it, I just fastboot flash recovery recovery.img from pc, then factory reset.
nyijedi said:
Don't freak out. I'm sure you're fine.
Unlocking the bootloader on my N10 caused me to hang at the X. Wiping data fixed it for me. Try the following:
1. Reboot into Fast Boot
2. Select Recovery using volume rocker. Hit power to select. You'll get the android mascot with the red exclamation point.
4. Press Power and Volume Up at the same time.
5. Choose to wipe all data. Confirm the selection.
6. Reboot.
Click to expand...
Click to collapse
Yes that seemed to work. Thank you Thank you Thank you
I almost had a heart attack
getsky said:
Yes that seemed to work. Thank you Thank you Thank you
I almost had a heart attack
Click to expand...
Click to collapse
Ha. No problem, man. I'm glad it worked. I've been there before.
nyijedi said:
Unlocking the bootloader on my N10 caused me to hang at the X. Wiping data fixed it for me. Try the following:
1. Reboot into Fast Boot
2. Select Recovery using volume rocker. Hit power to select. You'll get the android mascot with the red exclamation point.
4. Press Power and Volume Up at the same time.
5. Choose to wipe all data. Confirm the selection.
6. Reboot.
Click to expand...
Click to collapse
hi,
first timer here. i tried to get root using clockword mod following http://forum.xda-developers.com/showthread.php?t=2019273, but failed and get android mascot with the red exclamation point. following the above till #4 : Press Power and Volume Up at the same time, didn't bring me anywhere but turn off the device.
what should i do to get root ?
thank you,
I have installed 4.2.2 on nexus 7. As I had skipped account login at welcome screen, i could not login the account. I altered the apk of login. After factory reset my device has hanged on setup on welcome screen. I tried installing custom rom through stock bootloader but the bootloader says installation failed. How do I solve thia problem guys???
subin.nexus7 said:
don't know the exact steps, but i got it out of the APX mode and into the bootloader.
1. Tablet plugged into computer.
2. Held Volume Down + Volume Up + Power (simultatenously) for three seconds
3. And then released all, and pressed Power again.
4. Tablet booted into bootloader.
I thought that unlocking the bootloader ALWAYS voided the warranty, but in anycase I flashed reflashed ALL stock and locked the bootloader. Will be sending it to ASUS now. Thanks again!
EDIT:
So I wanted to verify that it was a CPU problem, and I downloaded StabilityTest again and ran the CPU load test. It crashed within two minutes, and went into AXP mode again. To get it out of AXP mode, the correct instructions:
1. Plug in the usb into computer
2. Hold Volume Down + Volume Up + Power simultaneously for like 15 seconds
3. The bootloader should show up.
4. If it doesn't, unplug the usb cable, and plug it back in and then repeat the these procedures.
Click to expand...
Click to collapse
Very helpful! I don't have a problem but I've read about others stuck in APX mode. This should be pinned if it works for those stuck in APX. Maybe you should change the thread title to something about APX solution so it draws some attention.
kieso said:
Very helpful! I don't have a problem but I've read about others stuck in APX mode. This should be pinned if it works for those stuck in APX. Maybe you should change the thread title to something about APX solution so it draws some attention.
Click to expand...
Click to collapse
Well... being stuck in APX doesn't necessarily mean your hardbricked. (Corrupt or erased bootloader).
But being hardbricked DOES mean your device will default to APX mode.
To use a mathematical metaphor, one is a SUBSET of the other.
-------
bftb0 has posted an exhaustive list of Nexus 7 button press combos here...
http://forum.xda-developers.com/showthread.php?t=2133986
... which includes how to pro-actively get into APX mode... although until somebody figures how to nvFlash the N7, APX is sort of redundant.
Rgrds,
Ged.
Delete
subin.nexus7 said:
I have installed 4.2.2 on nexus 7. As I had skipped account login at welcome screen, i could not login the account. I altered the apk of login. After factory reset my device has hanged on setup on welcome screen. I tried installing custom rom through stock bootloader but the bootloader says installation failed. How do I solve thia problem guys???
Click to expand...
Click to collapse
I'm sort of confused about the relationship between your edited post and what (apparently ?) kieso quoted, but I'll throw out a few suggestions:
1) AFAIK, there is no way to flash a dev ROM using fastboot (only the boot image of a dev ROM can be flashed this way). You said "bootloader", not "custom recovery" ... so that implies using fastboot. If that is not the case, then your use of terminology is not correct. (It's a computer - reporting details correctly is incredibly important).
2) If you bypass the WiFi login, an account can be added at any time later using the settings menu or simply by launching the Google Play (market) app - there is no need to "alter the apk of login", whatever that means.
3) I would recommend at this point that you start completely over by flashing a factory ROM using fastboot - see the sticky thread about returning to stock using fastboot. If you already have the 4.18 bootloader installed, I recommend you avoid like the plague any operation involving flashing the bootloader.
4) It should be obvious from the trouble that you got yourself into that you should learn what nandroid backups are and that you START USING THEM. The first thing you do after rooting is "make a backup", not "flash a ROM"
good luck
Thanq so much.But still some clarification needed
Now What do I do? My nexus 7 can't pass through at welcome screen saying saying unfortunately setup wizard has stopped. and in recovery{i have no custom recovery, I use bootloader 4.18} i cant flash any rom. I just want to start device any how.. any way.. Is there any way??
subin.nexus7 said:
Now What do I do? My nexus 7 can't pass through at welcome screen saying saying unfortunately setup wizard has stopped. and in recovery{i have no custom recovery, I use bootloader 4.18} i cant flash any rom. I just want to start device any how.. any way.. Is there any way??
Click to expand...
Click to collapse
I guess I am having trouble understanding the sum total of information you have provided - I guess you have omitted some information or mis-stated something. No custom recovery sort of implies a full stock device, but yet you previously mentioned modifying/changing an .apk in /system... normally that would be possible only with a rooted ROM or a custom recovery to do that.
If your tablet is 100% stock, a factory reset of the tablet should allow you to boot once again - at the cost of deleting everything you put on the device, including all files you put on the (pseudo-) SD card.
If that is the case:
- press and hold power+vol-down until the bootloader screen shows up
- use vol-up/vol-down to select "start recovery" and press the power button
- an android lying on it's back should show up; this is the stock recovery splash screen, so
- press power+vol-up simultaneously for about one second - the stock recovery menu should show up
- select factory reset (with vol-up/vol-down) and press the power button.
good luck
bftb0 said:
I guess I am having trouble understanding the sum total of information you have provided - I guess you have omitted some information or mis-stated something. No custom recovery sort of implies a full stock device, but yet you previously mentioned modifying/changing an .apk in /system... normally that would be possible only with a rooted ROM or a custom recovery to do that.
If your tablet is 100% stock, a factory reset of the tablet should allow you to boot once again - at the cost of deleting everything you put on the device, including all files you put on the (pseudo-) SD card.
If that is the case:
- press and hold power+vol-down until the bootloader screen shows up
- use vol-up/vol-down to select "start recovery" and press the power button
- an android lying on it's back should show up; this is the stock recovery splash screen, so
- press power+vol-up simultaneously for about one second - the stock recovery menu should show up
- select factory reset (with vol-up/vol-down) and press the power button.
good luck
Click to expand...
Click to collapse
when you say at the cost of deleting everything, does this include deleting everything in the bootloader because thats what I did when I used the command "fastboot erase bootloader"