Database Users

Official ICS 4.0.3 B928 Final + B927 Final CWM Update!

Changelog Final Full B928 ICS Baseband :
Added ICS baseband 404029!
https://docs.google.com/file/d/0B_kPUrNkk3T0QzdFMF82S3N4TE0/edit
Changelog Final B928 :
Fixed cust mount
Fixed operators search
http://narod.ru/disk/59067673001.f141d7d2b078e3f1e1299c0c8522a21f/U8800proB928CWMStockFinal.zip.html
Changelog Test1 B928 :
Fixed low in-call volume.
Rooted.
Nex (final) version: add operators search + add cust mount.
http://narod.ru/disk/59028952001.a9e8740afb149085a05f442fd4849521/U8800proB928CWMStockTest1.zip.html
Changelog Final B927:
Added up-to-date versions of google aplications.
Fixed in-call low sound issue.
Changelog v2 B927:
First boot in english language
Added all stock data/dataapp/ aplications to data/app/ (of course with FMRadio).
Added up-to-date versions of google aplications and Superuser.
No Tweaks no MODs, only rooted.
Changelog v1.1 B927:
Rooted
No Setup Wizard
How To Install:
You must be on 2.3 based ROM and have CWM 5.0.2.7 then:
1: You need to flash Step1 from official B926 for bigger system partition capacity,. If you already have biger system partition, you don't need to do this step.
you can download it here:
http://www.mediafire.com/?u9mvoxjf4lmlu8p
I flashed this UPDATE.APP from CM7.2 SdCard/dload/UPDATE.APP, wihtout battery and Vol+ Vol- POWER. I think that there is lots of ways to do that
2. Download ROM
3. Put it to external SD card and do it as allways, advanced>reboot recovery>wipe data/cache/dalvik cache>Instal ZIP from SD card>Choose zip with ROM's name
THE IMPORTANT INFO FOR ALL!!!
If you want to go back to GB Baseband (404020) having ROM you should flash it in CWM exactly after flashing ROM with GingerBreads Baseband!! If you will not do that, you will have no network connection!!!
https://docs.google.com/file/d/0B_kPUrNkk3T0QmRkTld5SFh5Vm8/edit
If someone want a ICS Baseband (404029) flashable via CWM it's here:
https://docs.google.com/file/d/0B_kPUrNkk3T0TzFsMzZoMjg0QlU/edit
Important information for ROM customizers
Write in you're posts how to go back to GB Baseband (404020).
Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SemiLite B927 For those who can't repartition system
Changelog:
Removed some Huawey apps
Lots of apps moved to data/app/ to free system partition
How To Install:
You must be on 2.3 based ROM
Put it to external SD card and do it as allways, advanced>reboot recovery>wipe data/cache/dalvik cache>Instal ZIP from SD card>Choose U8800proB927CWMStockSemiLite2.3Partition.zip
Link for download:
Final B927:
http://narod.ru/disk/58370604001.93...927CWMStockFinalSemiLite2.3Partition.zip.html
V2 B927:
http://narod.ru/disk/57810470001.ea...roB927CWMStockV2SemiLite2.3Partition.zip.html
I Cant test this version becouse I already have bigger system partition size.
Be welcome to share you're opinion abaut this release.
Lite version maded by marsilinio
No mods, no tweaks just removed lots unnecesary aplications. If you miss something you can allways download them from the google play.
Final B927
http://narod.ru/disk/58509050001.10...marsilinio U8800proB927CWMStockFinal.zip.html
V2 B927
http://forum.xda-developers.com/showthread.php?p=29307403
Big THANKS to giris for showing the right way, NForce25 for patience, Faith1ezz and marsilinio for community and sharing their knowledge!
WiFi TX Power enabler
http://forum.xda-developers.com/showpost.php?p=29395662&postcount=58
Averybody can make customs by taking them as base.
Please, don't forget about link to the source (original post)
Thank you!

Nice and long-awaited work! :good:

Great work keep it up
Sent from my U8800PRO using Tapatalk 2

that's great
i am also trying to make a rom based on B927.....can you explain me what you have done to make it working with old baseband? (simply because i don't have enough time to flash the rom a hundred times to test it )

IMEI Backup: 5iromtoolbox
matteof93 said:
that's great
i am also trying to make a rom based on B927.....can you explain me what you have done to make it working with old baseband? (simply because i don't have enough time to flash the rom a hundred times to test it )
Click to expand...
Click to collapse
I guess with 5iromtoolbox: :http://forum.xda-developers.com/showthread.php?t=1591997

Awesome post!

Wifi Not Working
The Wifi is not working. When I turn On, automatically turn Off. Any idea?

iceman2029 said:
The Wifi is not working. When I turn On, automatically turn Off. Any idea?
Click to expand...
Click to collapse
did you install 2.3 step1 before flashing this rom?

iceman2029 said:
The Wifi is not working. When I turn On, automatically turn Off. Any idea?
Click to expand...
Click to collapse
Installed not like in 1st post described. Wi-fi works fine, now updating soft from google play via wi-fi.

Do all exactly as in instrucion! You need biger system partition! That should be done by flashing step1 from b926 rom. Link is in instruction for repartition.
Sent from my ragelis

How make a bigger System partition?
bronxitas said:
Do all exactly as in instrucion! You need biger system partition! That should be done by flashing step1 from b926 rom. Link is in instruction for repartition.
Sent from my ragelis
Click to expand...
Click to collapse
I can't complete the Step 1, always say "Update Failed", and I tried all the ways.
Please, you know another way to extend my system Partition?:crying:

Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm

No way for the U8800-51 (Entel Chile) !
mm231982 said:
Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm
Click to expand...
Click to collapse
Yes, that is the correct way, however, my phone is a U8800-51 and I can't use the method DLOAD (vol + - and pwr), always say "Update Failed" (I tried for 5 hours many methods, "return To froyo", "Go to GB" "Huawei European Rom", etc). Must be because it verifies the model and mine is not a U8800Pro, then it fails.
So wondering if there is another way to enlarge my system partition.
Thanks
P.D: For now, Aurora 4 is working excellent, but, I really, really wants this ROM, for the FM Radio!

Tomorow i realese fixed version with fm radio, updated system apps and first boot language eng.
Iceman2029: just wait for lite version.
Sent from my ragelis

iceman2029 said:
Yes, that is the correct way, however, my phone is a U8800-51 and I can't use the method DLOAD (vol + - and pwr), always say "Update Failed" (I tried for 5 hours many methods, "return To froyo", "Go to GB" "Huawei European Rom", etc). Must be because it verifies the model and mine is not a U8800Pro, then it fails.
So wondering if there is another way to enlarge my system partition.
Thanks
P.D: For now, Aurora 4 is working excellent, but, I really, really wants this ROM, for the FM Radio!
Click to expand...
Click to collapse
there is no way to enlarge your system partition I think but you can do what I did to get it working.
just open the .zip file and delete the whole data folder + every app you are not gonna use in system/app (carefull not to delete something important)

Moihack said:
there is no way to enlarge your system partition I think but you can do what I did to get it working.
just open the .zip file and delete the whole data folder + every app you are not gonna use in system/app (carefull not to delete something important)
Click to expand...
Click to collapse
Thanks, let me try.
BTW, I used this post from Geno.Kolar: http://www.modaco.com/topic/341374-custom-you-data-partitions-size/, and now I have supposedly enlarged my system partition, but still I don't have Wifi.

iceman2029 said:
BTW, I used this post from Geno.Kolar: http://www.modaco.com/topic/341374-custom-you-data-partitions-size/, and now I have supposedly enlarged my system partition, but still I don't have Wifi.
Click to expand...
Click to collapse
you have to reflash the rom. if the system partition is not big to fit the whole rom, wifi foler + xbin folder are not copied correctly resulting in non-working wifi & improper root

i have a question?
mm231982 said:
Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm
Click to expand...
Click to collapse
How to downgrade from ics to gb, i have Aurora_4.1_4.0.4_fixed in U8800_51?
Thanks

Aurora based on 2.3 thats why you don't need to downgrade ics is the meaning of official b927 or b926 ROM's.
Today here will be lite version of stock ROM whitch will not need repartitioning.
Sent from my ragelis

Updated first post with v2 version and changelog. I think this is the Final verion of full stock.
Semi Lite version uploading - with posibility to flash on GB system partition size and removed some Huawey apps, other one moved to data/app/.
Lite version will be this evening by marsilinio.

From stock to ICS a guide for your U8800-51 or AT&T Impulse 4G

OK I think I cleaned this up a bunch:
Go Here to get all the files, and instructions.txt documentation. (UPDATE: due to dropbox's unreliability, I mirrored all the files to my Google drive public folder. Please use either as long as they work. Feel free to PM me if one goes down.)
ALL users should back up their APNs. Use an APN backup utility to backup/restore.
Code:
[QUOTE=eyeconic]May I make a suggestion?
Actually, EVERYONE should back up their APN. Some user may need to use that backup to restore their APN. I used: [url]https://play.google.com/store/apps/details?id=com.riteshsahu.APNBackupRestore[/url][/QUOTE]
Correct. EVERYONE should backup. Some may meed to restore.
Sent from my U8800-51 using xda-developers app. BAWLZ!
This was discovered by watching the GB Update Forum. Thanks to eyeconic.
Thank You to the Following People. (I hope I didn't forget anyone)
Code:
savagehqfor providing the stock IMG
http://narod.ru/disk/45137127001.c41110d6962cdd0386662315635cdcc4/u8800-51.rar.html
skippedfor instructions on reverting to stock
http://forum.xda-developers.com/showthread.php?t=1589205
KayxGee1for Win7 Roadkil fix
http://forum.xda-developers.com/showpost.php?p=24618284&postcount=2
skippedfor instructions on backing up phone using "Roadkil's DiskImage"
http://forum.xda-developers.com/showpost.php?p=24408417&postcount=3
roadkil.netfor making DiskImage
http://www.roadkil.net/program.php?ProgramID=12
zchuxz3xfor making a Stock to GB Tutorial
http://forum.xda-developers.com/showthread.php?t=1698308
Somcom3Xfor making a Custom GB to Updated GB Tutorial
http://forum.xda-developers.com/showthread.php?t=1844442
Somcom3Xfor making a Updated GB to Aurora ICS Tutorial
http://forum.xda-developers.com/showthread.php?t=1844982
[email protected] providing Browser.apk to fix crashing browser
http://forum.xda-developers.com/showpost.php?p=26917631&postcount=3
hitaxasfor linking to [email protected]'s posting of Browser.apk
http://forum.xda-developers.com/showpost.php?p=31196713&postcount=18
Bad.Fishfor discovering that a factory reset was needed after backing up the phone.
eyeconicfor discovering that some people need to back up APNs.
*************NOT OPTIONAL!*****************
********Backing UP Working u8800-51********
****VERY IMPORTANT! Do in case of FAIL!****
Code:
Make a disk img recovery Using "Roadkil's Disk Image" (and Pink screen)
The procedure is easy and you just take about 8 minutes..
Instructions:
0.a Back up IMEI using ToolBox5irom
0.b Download the tool "Roadkil's Disk Image"
1.a Hold both ends of the volume rocker (Vol+ and Vol- at the same time) and press the power button.
1.b Connect your phone to PC using USB
2.a Run "Roadkil's Disk Image" (from step 0.a)
2.b Click on the "Store Image" tab.
2.c In "Store Image to" click the combobox and choose "Physical Disk #" ("#" is a number) * If there are more than one "Physical Disk #", then you have to choose the one that is about 3.6gb.. This part is very important.. if you restore a backup from another disk, it will leave your phone unusable.
** To be sure that that Physical Disk you choose is the Huawei u8800-51, You can run the tool again (because it has to refresh) without the phone connected, then check which disks are available. Then, close the tool again, connect the device (in pink screen), run the tool, and check what physical disk was added. But it will be about 3.6gb.
2.d In "target file", save the file as "u8800-51.img" in a folder with more than 4gb of storage available.
** There is no risk for you, as it is just copying data, not writing. **
** The risk is when restoring a backup if you backed up the wrong Disk... **
** If you compress the "u8800-51.img" file into a "rar" file, the size will be about 700 mb, then put it in a safe place. (Like DropBox, and/or multiple hard drives, etc.) **
UPDATE:
I have used this method to restore my phone 3 times without problems, but I'm win7 so I had to use the win7 fix outlined above.
Stock Froyo to Custom GB
Code:
Instructions:
0.a Back up IMEI using ToolBox5irom
0.b Make a disk img recovery Using DiskImage (and Pink screen)
0.c Boot into recovery (Vol+ & Power) and do a factory restore.
1.a Download "U8800-51 a Gingerbread.rar"
1.b Extract the Archive.
2.a Transfer the "dload" folder to the root of your sdcard
2.b Turn the phone off completely
2.c Hold both ends of the volume rocker (Vol+ and Vol- at the same time) and press the power button. (As though going into Pink Screen) Installation will start.
3.a After the phone finished installing and boots into Android choose the language.
3.b You will notice that you have no signal. This is Fine for Now.
3.c Open File Manager and delete the "dload" folder.
3.d you must also clear the Quick Start (labeled "Fast Boot") in settings> applications, then turn off the phone
4.a Boot Phone into Bootloader (Pink Screen, see step 2.c)
4.b Connect to the pc via USB.
4.c Replace the "boot.img" with the "boot.img" from the "Root para Gingerbread" folder.
5.a Turn on the phone and verify that you have super user.
5.b Turn off phone.
5.c Boot Phone into Bootloader (Pink Screen, see step 2.c)
5.d Replace the "boot.img" with the "boot.img" from the "boot original" folder.
6.a Install ToolBox5irom (step 0.a)
6.b Restore IMEI
6.c Reboot System
** System Should now boot with functional Data. **
Custom GB to Updated GB
Code:
This is a modified stock gingerbread rom for the u8800-51
Instructions:
0.a Back up IMEI using ToolBox5irom
0.b Make a disk img recovery Using DiskImage (and Pink screen)
0.c Download "ginger movida v1.1.zip"
0.d Download "CWMv5.5.0.4 recovery.img"
1.a Hold both ends of the volume rocker (Vol+ and Vol- at the same time) and press the power button.
1.a Replace "recovery.img" with "CWMv5.5.0.4 recovery.img"
1.b Wipe Battery Stats/cache/dalvik cache in cwm
2.a Install "ginger movida v1.1.zip" using CWM. (From Phone off, Hold Vol+ and Press Power)
2.b Reboot system
** If there is a problem, revert it to stock 2.2 via disk image and start over again. **
Updated GB to Aurora ICS
Code:
This is a modified Aurora ICS Final Build.
Modified Gingerbread must be installed first!
Install at your own risk!
Instructions:
0.a Back up IMEI using ToolBox5irom
0.b Make a disk img recovery Using DiskImage (and Pink screen)
1.a Download "Aurora.zip"
1.b Download "gapps-ics-20120429-signed.zip"
1.c Download "UPDATED AURORA.zip"
1.d Download "CWMv6.0.1.0 recovery.img"
1.e Download "Browser.apk" (to fix crashing browser after everything)
2.a Install CWMv6.0.1.0 recovery (from step 1.d) (Install it via pinkscreen or root explorer.)
2.b Wipe Data/battery stats via CWM
3.a Install "Aurora.zip" (from step 1.a) via CWM
3.b Reboot System
3.c Install "UPDATED AURORA.zip" (from step 1.c) via CWM
4.a Reboot system.
4.b Install "gapps-ics-20120429-signed.zip" (from step 1.b) via CWM
4.c Reboot System
5.a Install Browser.apk (from step 1.e)
Note: It may take MANY attempts for it to start, it will constantly reboot. If it takes more than 1/2 hour, than you must restore the disk img recovery.
To enable mass storage install u8800 Aurora drivers and do not toggle mtp. If toggled you need factory reset.
Edit: Tested by me. Must install another keyboard since system keyboard does not exist.
Usb only recognized in recovery, seeking adb fix.
In order for back light you must select auto brightness then un select it.
It begins in Spanish but you need to select language and restart.
Must download poweramp to play music.
No radio
3g may or may not work
Download
You have been warned.
Stable for daily use.
***************OPTIONAL!*******************
*********Reverting to Stock Froyo**********
***ONLY DO THIS IF YOU MESS SOMETHING UP***
Code:
** This will not work on Entel users in Chile as it is a locked restore (it is for at&t users only)- **
100% of the time, You should always backup anything you change. Especially if you don't know what the change will do.
This instructional will help you recover from screwing up your phone (assuming you didn't make a backup image before messing with it.)
Instructions:
0.a Download "DiskImage_1_6_WinAll_Setup.exe"
0.b Use "LockDismount0300.zip" in case of WIN7 problems (see bottom of document)
0.c Download "U8800-51.rar" (about 400mb but its compressed, its really 3.9gb)
0.d Extract "u8800-51.img" from "U8800-51.rar" (Fail to do this and brick your phone)
1.a Open the tool "Roadkil's Disk Image" (from step 0.a)
1.b Hold both ends of the volume rocker (Vol+ and Vol- at the same time) and press the power button. (This puts you in Pink Screen)
1.c Connect to PC using USB.
2.a Run "Roadkil's Disk Image" (from step 0.a)
2.b Click on the "Write Image" tab.
2.c In "Write Image to" click the combobox and choose "Physical Disk #" ("#" is a number)
** If there are more than one "Physical Disk #", then you have to choose the one that is about 3.6gb. **
** This part is very important.. **
** If you use a backup from another disk, it will leave your phone unusable. **
** To be sure that that Physical Disk you choose is the Huawei u8800-51, You can run the tool again (because it has to refresh) without the phone connected, then check which disks are available. **
** Then, close the tool again, connect the device (in pink screen), run the tool, and check what physical disk was added. But it will be about 3.6gb. **
3.a In "source file", choose the file "u8800-51.img" that you Extracted from u8800-51.rar (in step 0.d) (remember it is about 3.9gb and extension is ".img")
3.4 Press Write Image.
3.5 After it is 100% ready, disconnect and do a factory reset and you will have 3g working.
** If you were smart enough to have backed up your IMEI at some point, you can install "ToolBox5iromV1.0.4.2.apk" and restore it at this point. **
** If you were smart enough to have backed up your phone prior to messing it up, you can replace any use of "u8800-51.img" in this instructional with your backup image. **
** I already went through one phone because I wasn't smart enough to do backups. Learn frommy mistakes. **
** This will not work on Entel users in Chile as it is a locked restore (it is for at&t users only)- **
*** FOR THE USERS ON WIN7 HAVING TROUBLE WITH "Roadkil's Disk Image" ERROR ***
4.a Download LockDismount to fix the issue (see step 0.b)
4.b Run LockDismount (Run compatibility XP3)
4.c Select the necessary 3.69 drive described above (check multiple times to ensure you're selecting the right drive, for me it was Physical Drive 1)
4.d Click Lock
4.e Keep LockDismount open
4.f Run "Roadkil's Disk Image" (from step 0.a) and then go through the downgrade process. (Start with step 2.a)
Error should be fixed now!
*** FOR THE USERS ON WIN7 HAVING TROUBLE WITH "Roadkil's Disk Image" ERROR ***
Please let me know if I missed anything.

your missing all the roms except for aurora btw.

Somcom3X said:
your missing all the roms except for aurora btw.
Click to expand...
Click to collapse
Yeah. Lol forgot that Dropbox says 14 more hours to complete sync.

Wow!
Sent from my u8800-51 using xda premium

Somcom3X said:
Wow!
Sent from my u8800-51 using xda premium
Click to expand...
Click to collapse
Okay all of the files finished uploading.

Updated aurora info.
Sent from my u8800-51 using xda premium.

Somcom3X said:
Updated aurora info.
Sent from my u8800-51 using xda premium.
Click to expand...
Click to collapse
Do I need to make any changes to my files/instructions, then?
Oh I see. You linked to my thread. Cool, Thanks.

OK. Here it is (so far...)
I backed up my imei. (5irom)
I backed up my Phone (Roadkil's DiskImage)
I installed GB (data didn't work after everything, so i said screw it and: )
Installed Updated GB. (After that my GF called and I couldn't install ICS right away, but phone and data was working.)
Going to install ICS now.

BTW Wifi was working too.
...And just finished. Everything seems to be working now.

Did you install?

Somcom3X said:
Did you install?
Click to expand...
Click to collapse
Yup. Also edited my build.prop so my device shows as U880-51 instead of pro...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my U8800-51 using xda app-developers app

interf sist error
Hello, :good:
thanks for the guide and roms from our device.
I installed the rom ICS on my u8800-51 from Brasil, but when I change the language to Portuguese the app "Interf sist" closes. Run ok only in English. Exists any correction for this problem?

Danielregis said:
Hello, :good:
thanks for the guide and roms from our device.
I installed the rom ICS on my u8800-51 from Brasil, but when I change the language to Portuguese the app "Interf sist" closes. Run ok only in English. Exists any correction for this problem?
Click to expand...
Click to collapse
I am sorry. I don't know much about anything non-english. I am just a typical english-only American. (Much to my chagrin.) I only gathered up guides others had made an put them together. You may have better luck asking in the forum specific to the Android version you installed up to. I can only share my own experience.
Sent from my U8800-51 using xda app-developers app

Danielregis said:
Hello, :good:
thanks for the guide and roms from our device.
I installed the rom ICS on my u8800-51 from Brasil, but when I change the language to Portuguese the app "Interf sist" closes. Run ok only in English. Exists any correction for this problem?
Click to expand...
Click to collapse
try to uncheck 24 hours format after changing the lenguage , in settings -> date and time.

I made a couple bootanimations
http://forum.xda-developers.com/showthread.php?t=1899090

[bootanimation] u8800-51
I made this Bootanimation in Powerpoint. I like it, so I thought I'd share.
U8800-51 bootanimation.zip

Thanks! Used it to unbrick my Ideos X5 PRO!
Thank you very much!

You unbricked a pro using a -51 rom?

freezes after dload reboot
phone reboots then freezes on startup going from stock to gb.... any suggestions?

there's anyone found any solution to the white screen in facebook and gmail?

Incredible!!! Touchscreen firmware updated

I called one day the Touchscreen USSD #removed for n00bs and I don't know that this destroy you touchscreen #
but i pressed the UPDATE button DONT TRY and.... touchscreen doesnt work ... after... Update completed!!! Touchscreen works!!!
Is this UPDATE button harmful as update Camera firmware, or is will update a bit of touchscreen files for Android?
It works for me but Don't Try it!! I does't will have a touchscreen series brick on XDA-developers
If this Update butten too harmfull, please remove this therad
Please help...

i'm the victim
I think doing that is harmful!! coz it had killed my touchscreen after update fail!!
still lookin for soln!
but by the way! thanx for ur warning!

SOLUTION!!!!!!!
Rutayuga91 said:
I think doing that is harmful!! coz it had killed my touchscreen after update fail!!
still lookin for soln!
but by the way! thanx for ur warning!
Click to expand...
Click to collapse
-Solution-
Before we start, make sure you have Java, if not download from here: http://java.com/en/download
I did the touch screen firmware update on my old S5570, i deliberately took battery out during update as i couldnt care less about the phone and wanted a challenge; and sure enough it was dead... But wait... I managed to successfully fix it.... how?
Well
1. Put a custom recovery on your phone (Preferably CWM) - On my samsung you put it into download mode and flash through odin
2. Download ANY custom ROM for your device (.zip format)
3. Open the downloaded zip on your computer, navigate using WinRAR to /system and find the file build.prop, open that file with WordPad, not Notepad but WORDPAD. Find where it says "persist", and there will be a few that start with that, go to the last line and insert:
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
This enables USB Debugging by default, I'll explain why you need this later,
Ok save the build.prop and stick it back in the ZIP archive, now download this: https://www.mediafire.com/?omdol91672ieenr
Extract contents to Java directory C:/Program Files (x86)/Java/<Java>/bin (or C:/Program Files/Java/<Java>/bin for 32-bit)
Run cmd and type cd C:/Program Files (x86)/Java/<Java>/bin
(eg "cd C:\Program Files (x86)\Java\jre7\bin")
Place your modified .zip in the /bin folder and name as "rom.zip"
Run sign_file.bat
There should be a rom_signed.zip file in the /bin directory
Now put your phone in recovery and Mount USB storage, drag your "rom-signed.zip" in the root directory, I imagine you'd know how to flash it, but remember to wipe data and cache before hand
Now here's the fun bit
Reboot phone after ROM is installed, 1st boot may take a while
Plug USB in to your computer and download ADB: http://androidarea51.com/downloads/adb.zip
Extract to C drive, now open CMD and type cd.. and cd.. again, then type adb devices, hopefully your phone's serial should appear, if not you have either not got drivers installed or you have done something wrong
So you see your serial number beside adb devices? Great
Now download this: http://androidscreencast.googlecode.com/svn/trunk/AndroidScreencast/dist/androidscreencast.jnlp
^^ This requires USB Debugging ^^
And run it, press a button on your phone and it should appear on your pc screen, using your mouse run through the setup proccess, once done open dialer and press "*#2663#" and press Update, then after reboot your phone and...
Touchscreen fixed successfully xD
This worked for me anyway, sorry if some of the instructions are hard to follow, it's my first tutorial so sorry, but please reply if you need any help

Hi, I was trying to follow your tutorial but when I try to install the rom "signed" CWM says that there's an error, I already tried with different recoveries and in some cases it says that the MD5 doesn't exist or the file is not signed or that the rom-signed.zip file can't be opened. I'm using CWM 6.0.4.5 and twrp 2.7.1.0. but I can't install the rom.

Try to recopy
lalo69 said:
Hi, I was trying to follow your tutorial but when I try to install the rom "signed" CWM says that there's an error, I already tried with different recoveries and in some cases it says that the MD5 doesn't exist or the file is not signed or that the rom-signed.zip file can't be opened. I'm using CWM 6.0.4.5 and twrp 2.7.1.0. but I can't install the rom.
Click to expand...
Click to collapse
Hi. Have you tried to recopy the ROM zip file to your sdcard? This usually happens to me also. Maybe the zip was corrupted while copying it from the PC to your sd card. Try to recopy the ROM.

failed to update.
pcwiztech said:
-Solution-
Before we start, make sure you have Java, if not download from here: http://java.com/en/download
I did the touch screen firmware update on my old S5570, i deliberately took battery out during update as i couldnt care less about the phone and wanted a challenge; and sure enough it was dead... But wait... I managed to successfully fix it.... how?
Well
1. Put a custom recovery on your phone (Preferably CWM) - On my samsung you put it into download mode and flash through odin
2. Download ANY custom ROM for your device (.zip format)
3. Open the downloaded zip on your computer, navigate using WinRAR to /system and find the file build.prop, open that file with WordPad, not Notepad but WORDPAD. Find where it says "persist", and there will be a few that start with that, go to the last line and insert:
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
This enables USB Debugging by default, I'll explain why you need this later,
Ok save the build.prop and stick it back in the ZIP archive, now download this: https://www.mediafire.com/?omdol91672ieenr
Extract contents to Java directory C:/Program Files (x86)/Java/<Java>/bin (or C:/Program Files/Java/<Java>/bin for 32-bit)
Run cmd and type cd C:/Program Files (x86)/Java/<Java>/bin
(eg "cd C:\Program Files (x86)\Java\jre7\bin")
Place your modified .zip in the /bin folder and name as "rom.zip"
Run sign_file.bat
There should be a rom_signed.zip file in the /bin directory
Now put your phone in recovery and Mount USB storage, drag your "rom-signed.zip" in the root directory, I imagine you'd know how to flash it, but remember to wipe data and cache before hand
Now here's the fun bit
Reboot phone after ROM is installed, 1st boot may take a while
Plug USB in to your computer and download ADB: http://androidarea51.com/downloads/adb.zip
Extract to C drive, now open CMD and type cd.. and cd.. again, then type adb devices, hopefully your phone's serial should appear, if not you have either not got drivers installed or you have done something wrong
So you see your serial number beside adb devices? Great
Now download this: http://androidscreencast.googlecode.com/svn/trunk/AndroidScreencast/dist/androidscreencast.jnlp
^^ This requires USB Debugging ^^
And run it, press a button on your phone and it should appear on your pc screen, using your mouse run through the setup proccess, once done open dialer and press "*#2663#" and press Update, then after reboot your phone and...
Touchscreen fixed successfully xD
This worked for me anyway, sorry if some of the instructions are hard to follow, it's my first tutorial so sorry, but please reply if you need any help
Click to expand...
Click to collapse
sir it always fails to update. any solution? im using galaxy pocket.

sumtingswong said:
sir it always fails to update. any solution? im using galaxy pocket.
Click to expand...
Click to collapse
What fails to update?
The ROM installation or Touchscreen?

Finally
Finally someone noticed me.
I've been struggling with this problem for quite sometime now sir. i've followed the procedure sir yet when i press "*#2663#" and press Update, it always fails no matter how many times i do it, please help me sir.
---------- Post added at 08:33 AM ---------- Previous post was at 08:22 AM ----------
pcwiztech said:
What fails to update?
The ROM installation or Touchscreen?
Click to expand...
Click to collapse
Finally someone noticed me.
I've been struggling with this problem for quite sometime now sir. i've followed the procedure sir yet when i press "*#2663#" and press Update, it always fails no matter how many times i do it, please help me sir.

sumtingswong said:
Finally someone noticed me.
I've been struggling with this problem for quite sometime now sir. i've followed the procedure sir yet when i press "*#2663#" and press Update, it always fails no matter how many times i do it, please help me sir.
Click to expand...
Click to collapse
Why do you want to do this - there is no benefit and a strong possibility your touchscreen will no longer work if it goes wrong

marcussmith2626 said:
Why do you want to do this - there is no benefit and a strong possibility your touchscreen will no longer work if it goes wrong
Click to expand...
Click to collapse
No sir. That's the problem, i accidentally accessed the menu in *#2663# and pressed the update button not knowing that i would make my touchscreen unusable. I'm just trying to restore everything back to normal sir, for i cannot afford to buy another phone sir.
Sorry for my bad english, i'm not a native speaker.

sumtingswong said:
No sir. That's the problem, i accidentally accessed the menu in *#2663# and pressed the update button not knowing that i would make my touchscreen unusable. I'm just trying to restore everything back to normal sir, for i cannot afford to buy another phone sir.
Sorry for my bad english, i'm not a native speaker.
Click to expand...
Click to collapse
you can try
http://forum.xda-developers.com/showthread.php?t=1505412
the guide is for the galaxy mini but you should be able to adapt it

sumtingswong said:
No sir. That's the problem, i accidentally accessed the menu in *#2663# and pressed the update button not knowing that i would make my touchscreen unusable. I'm just trying to restore everything back to normal sir, for i cannot afford to buy another phone sir.
Sorry for my bad english, i'm not a native speaker.
Click to expand...
Click to collapse
Try this ROM, this should contain the touchscreen binary in the kernel fixing the update fail message: http://www.mediafire.com/download/l570r7dm7545m34/explode+rom+build+5.zip

pcwiztech said:
Try this ROM, this should contain the touchscreen binary in the kernel fixing the update fail message: http://www.mediafire.com/download/l570r7dm7545m34/explode+rom+build+5.zip
Click to expand...
Click to collapse
still no luck sir, still says update fail.

sumtingswong said:
still no luck sir, still says update fail.
Click to expand...
Click to collapse
Please make sure when you dial *#2663# you press Binary Update and NOT Internal Storage

pcwiztech said:
Please make sure when you dial *#2663# you press Binary Update and NOT Internal Storage
Click to expand...
Click to collapse
it only have one option sir, just update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help me sir.

pcwiztech said:
Please make sure when you dial *#2663# you press Binary Update and NOT Internal Storage
Click to expand...
Click to collapse
sumtingswong said:
it only have one option sir, just update.
please help me sir.
Click to expand...
Click to collapse
Ah yes. It seems as the kernel is also "00" - try a different ROM or even a rooted stock rom that has a different kernel. My S5570 had the same issue, tried a different rom and voila

pcwiztech said:
Ah yes. It seems as the kernel is also "00" - try a different ROM or even a rooted stock rom that has a different kernel. My S5570 had the same issue, tried a different rom and voila
Click to expand...
Click to collapse
Okay sir, i'll just try all the custom roms.

pcwiztech said:
Ah yes. It seems as the kernel is also "00" - try a different ROM or even a rooted stock rom that has a different kernel. My S5570 had the same issue, tried a different rom and voila
Click to expand...
Click to collapse
after 10 attempts still no luck sir. please advice.

sumtingswong said:
after 10 attempts still no luck sir. please advice.
Click to expand...
Click to collapse
Hi, sorry for delayed reply, It's morning here.
Unfortunately i think the only option will be to replace your phones digitizer, this will cost around £15-£25 from eBay
Unless you can find a boot.img (kernel) that has the touchscreen firmware then that's your only choice.

pcwiztech said:
Hi, sorry for delayed reply, It's morning here.
Unfortunately i think the only option will be to replace your phones digitizer, this will cost around £15-£25 from eBay
Unless you can find a boot.img (kernel) that has the touchscreen firmware then that's your only choice.
Click to expand...
Click to collapse
thanks for your help sir, i really appreciated it. £15 is the price of a 2nd hand galaxy pocket here sir, so i guess i should really saved for it. i guess i should give up now, it's been quite sometime since ive been stressing myself because of this. godbless you sir.

MysticMoD ™ v2 Custom MoD with Timescape UI Xperia™ style for Karbonn A9

Hi Folks!!!
Finally My MysticMod™ v2 is out here live for you guys to try.
MysticMod™ v2 feature
Full Timescape UI
Sony backup and restore
Bravia Engine
XLoud music
Walkman(My own port)
Sony Contacts app
Sony Messaging app
Sony launcher
Sony Widgets full support including photo frame
Smooth
Power tweaks and boots
Super fast Rom
much more!!!!
PLZ DONOT REPORT KNOWN BUGS
Disclamer:
Quote:
By flashing this rom you take full responsibility of your actions. Neither I nor XDA will be held responsible for anything. I will not be responsibe if your phone is dead or your sd card is dead or your phone just burned up.
Instructions to install
Quote:
[#] Make a Nandroid Backup
[#] Wipe Data/Factory Reset
[#] Wipe Dalvik Cache
[#] Install Rom and Reboot
Method to take current ROM
1 Reboot into recovery, by pressing and holding power+volumeup key, till u see a red screen
2 select the option back up and restore
3 select backup
Now u have a back up of your current ROM!!!!
Download the files including the attachment and place in the Root of your SD card, that is, do not place it in any folder but keep the file just on your SDcard.
Method to Flash my MysticMoD
1 Reboot to recovery
2 wipe cache partition
3 Wipe format/factory reset data
4 Flash zip from SD card
5 choose zip file
6 Select MysticMOD from your ex SD card
7 select MysticMoDSony.zip and flash it over the beta2, the zip file is ho the attachment.
Voila!!!!
MysticMoD v2 is now all yours on your Lovely A9
DownLoad link
http://www.mediafire.com/?r393d9zdz1q7dq3
Screenshots Coming Soon!!!
Known Bugs
contacts
vanish yen phone reboot,
solution: have to make a back up to sd card and also use Sony back up and restore app to take back up
messaging app force closes when going to settings, and u can use ly 1st sim to send sms.
solution: can get the default messaging app replaced.
plz do not report these bugs, as can't manage to fix this even after 2weeks of continues research and programming!!!
for ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
criedt
prratha93

For ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
Credit
prratha93

This is to inform you guys that the ROM I have uploaded is the beta 2 version, and final version patch would be released today, 'm sorry error regretted, it was an error while uploading selected a wrong file, I will just release the final patch so dat u can flash it on this ROM 'm sorry about it
Edit
Attachment uploaded check 1st post

ausome
nxt plz add one file browser in rom :good:
HERE ARE SCREEN SHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

great work
i think this is best rom i ever have

Hi zeyan,
Good Work.. Karbonn A11 phone specs is similar to Karbonn A9. & it comes with Android 4.0. Can we port this to Karbonn A9?
Please....

hoping to see the mysticmod v3 touchviz ui soon......!!!

Waiting for next mysticmod v3
kewlest22 said:
hoping to see the mysticmod v3 touchviz ui soon......!!!
Click to expand...
Click to collapse
Please release next version bro

mysticmod v3 releasing or no??? its more than a month now....!!!

Moaning never pays out well, enjoy what you already have

All devs and researchers who are willing to Get our A9 an ICS upgrade plz come and discuss here....this is important plz help A9 users to get the best wat they deserve....
Thread:http://forum.xda-developers.com/showthread.php?t=2065533
Sent from my A9 using Tapatalk 2

Hi
zeyaan said:
Hi Folks!!!
Finally My MysticMod™ v2 is out here live for you guys to try.
MysticMod™ v2 feature
Full Timescape UI
Sony backup and restore
Bravia Engine
XLoud music
Walkman(My own port)
Sony Contacts app
Sony Messaging app
Sony launcher
Sony Widgets full support including photo frame
Smooth
Power tweaks and boots
Super fast Rom
much more!!!!
PLZ DONOT REPORT KNOWN BUGS
Disclamer:
Quote:
By flashing this rom you take full responsibility of your actions. Neither I nor XDA will be held responsible for anything. I will not be responsibe if your phone is dead or your sd card is dead or your phone just burned up.
Instructions to install
Quote:
[#] Make a Nandroid Backup
[#] Wipe Data/Factory Reset
[#] Wipe Dalvik Cache
[#] Install Rom and Reboot
Method to take current ROM
1 Reboot into recovery, by pressing and holding power+volumeup key, till u see a red screen
2 select the option back up and restore
3 select backup
Now u have a back up of your current ROM!!!!
Download the files including the attachment and place in the Root of your SD card, that is, do not place it in any folder but keep the file just on your SDcard.
Method to Flash my MysticMoD
1 Reboot to recovery
2 wipe cache partition
3 Wipe format/factory reset data
4 Flash zip from SD card
5 choose zip file
6 Select MysticMOD from your ex SD card
7 select MysticMoDSony.zip and flash it over the beta2, the zip file is ho the attachment.
Voila!!!!
MysticMoD v2 is now all yours on your Lovely A9
DownLoad link
http://www.mediafire.com/?r393d9zdz1q7dq3
Screenshots Coming Soon!!!
Known Bugs
contacts
vanish yen phone reboot,
solution: have to make a back up to sd card and also use Sony back up and restore app to take back up
messaging app force closes when going to settings, and u can use ly 1st sim to send sms.
solution: can get the default messaging app replaced.
plz do not report these bugs, as can't manage to fix this even after 2weeks of continues research and programming!!!
for ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
criedt
prratha93
Click to expand...
Click to collapse
Hi,
Can you please repost the link of downloading mysticmodV2 with beta2? I was not able to access any of the zip files except the one attached in this forum and after flashing that SonyMysticModv2.zip only my status bar and wallpaper got changed and the animations have become bautiful.
Please let me know the links to download the proper update file. I am eagerly waiting to try your ROM. It looks lovely :good:

hey the links are working. i checked on my friends laptop my internet has mediafire blocked seems
Sent from my A9 using xda app-developers app

Hi zeeyan any update regarding any new mod created by you for A9 i love ur mysticmod v2 its simply awesome
Sent from my A9 using xda app-developers app

jhalife said:
Hi zeeyan any update regarding any new mod created by you for A9 i love ur mysticmod v2 its simply awesome
Sent from my A9 using xda app-developers app
Click to expand...
Click to collapse
thanks for all your Love and support,but since I moved away from karbonn a9 and don't have the device I 'm no more working on mysticmod touchwiz.
its a sad announcement I understand Your expectations but It's really unfortunate.
sorry

sad news we lost one developer anywaya zeeyan ur wrk r really awesome
Zeeyan i needed ur 1 help ya. I wanted to replace framework-res.apk i created a theme with UOT kitchen but i am unable to flash it using our CWM. i get installation aborted message.
once i had tried replacing by jst cut paste but i hd encounttered boot loops dn i hd to flash update.zip.
It would be very kind of you if you can let me know how to create a flashable zip file to replace the framewrk apk.
waiting for your response
Sent from my A9 using xda app-developers app

hey zeeyan my wrk is done. i was able to create flashabke zip possibly m on a pth to become A9 dev.
Sent from my A9 using xda app-developers app

jhalife said:
hey zeeyan my wrk is done. i was able to create flashabke zip possibly m on a pth to become A9 dev.
Sent from my A9 using xda app-developers app
Click to expand...
Click to collapse
good to know that u can theme as many zip files as u wish and post on my thread so that other users use it too

[ROM] CM7.2 MOD V1 for U8800Pro , the other sight of CM7 , based on Geno's CM7 port

Well , it's time to have some fun with cm7 ...
this is the other sight of CM7 .
is a modded CM7.2 rom , ported over geno's CM7 ports
Thank to genokolar for his great port and kernel
THIS ROM IS 2.3 BASED ROM , SO MUST BE ON GINGERBREAD BASEBAND TO FLASH IT.
Kernel sources from genokolar ... https://github.com/genokolar/android_device_huawei_u8800 ... https://github.com/genokolar/kernel_huawei
GREDITS
Genokolar
Bhupatib for ice10 theme
Changelog
rooted , unlock fps and blablabla........
a modern look of cm7
hdr enabled
new camera apk
new settings apk , with header titles like on ics
new media profiles.xml
modded framework.jar to increase volume steps and changes to scrolling cache
added sony bravia engine mod
build.prop and init.d tweaks
no need to flash gapps
i don't remember what else ...
CM7.2 MOD V1
Changelog
Great improvements , to sound and camera.
Mms apk, supporting 160 characters.
Patched systemui for transparency.
New modern look.
Bootanimation from cm10.
Changed some build.prop and init.d tweaks for the best performance , , responsiveness and speed.
Download , CM7.2 MOD V1 (10/06/2013).
http://www.mediafire.com/download/d8bi5bavzjmpjm3/CM7.2_MOD_V1.zip
Installation
get into recovery
wipe data , wipe cache , wipe dalvik , format system , install zip ...
TIP 1 , MOVE DALVIK TO SD EXT PARTITION TO SAVE MORE SPACE TO DATA ( INTERNAL MEMORY)
1. For moving dalvik cache to sd ext partition , you must partition your sd card through recovery.
So, go to recovery ..
Choose advanced and then partition sd card.
Then choose, ext = 512 ...
Then choose, swap = 0 ...
Let it finish ...
Put the CM7.2_MOD.zip in your sd, and flash the rom.
2.If you allready have a partitioned sd card, then you can skip the above first step.
Then, open root explorer and go to data folder.
Press and hold dalvik-cache folder and choose "move" .
Now go back and paste it to, sd-ext folder.
Press and hold dalvik-cache folder and choose "link to this folder".
Go back to data folder again and "create link" there.
That's it , reboot your phone and enjoy more free space to install applications.
NOTE 1. Rememper that partition sd, deletes everything in sd card, so have a copy of your sd card content to pc, to paste it back to sd.
NOTE 2. If you ever wipe cache and dalvik cache from recovery, then you must do the 2nd step and move dalvik to sd-ext again.
UPDATED , media_profiles.xml (12/08/2013)
For HD 720p video recording
Now you can record 720p video and stereo
There's not an option in camera settings , now option "high" will record 720p videos and stereo sound.
Get this ... media_profiles.zip
With root explorer , Extract it , take "media_profiles.xml" and paste it to "system/etc/" , replace and give permissions ( rw-r--r-- )
Reboot
Done
JB theme for CM7.2 Mod V1
Changelog
16 themed system apps ( accounts and sync,bluetooth,calculator,calendar, contacts, camera, download provider,deskclock,gallery3d, latinime,mms,package installer, phone,settings,systemui and framework res) .
Included, ice10 theme ( thanks to bhupatib ... http://forum.xda-developers.com/show....php?t=2003484 ).
Included, 720p HD camera fix.
No more grey screen after pin.
Download, CM7.2 JBthemeUpdate
http://www.mediafire.com/download/flz8rud4w9ldgfv/CM7.2_JBthemeUpdate.zip
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTALLATION
Put the zip in your sd card
Boot into recovery and go to advanced and choose reboot recovery.
Then, wipe cache partition and advanced and wipe dalvik cache.
Then, install zip from sd card/choose zip from sd card/ and choose the CM7.2 JBthemeUpdate.zip
Reboot system now
Wait about 3 min to boot
After phone boots, open theme chooser and apply ice10 theme.
Choose apply anyway
Reboot your phone
Enjoy ...
All GREDITS for ice10 theme goes to bhupatib ... http://forum.xda-developers.com/show....php?t=2003484
Screenshots , here ... http://forum.xda-developers.com/showpost.php?p=44908371&postcount=164
CM7.2 JB theme UNDO
To go back to default CM7.2 MOD theme
Download , CM7.2 JB theme UNDO
http://www.mediafire.com/download/aq...BthemeUNDO.zip
INSTALLATION
Open theme chooser and apply "system" theme
Put the zip in your sd card
Boot into recovery and go to advanced and choose reboot recovery.
Then, wipe cache partition and advanced and wipe dalvik cache.
Then, install zip from sd card/choose zip from sd card/ and choose the CM7.2 JBthemeUNDO.zip
Reboot system now
Wait about 3 min to boot
Enjoy

Took you long enough. Jk.
Your the man gk
Too late for me.
My -51 has cracked digitizer.
Time for change. I feel like dinglia
Sent from my SAMSUNG-SGH-T769.

yippeeee
I had problems with geno's CM7.2
while toggling mobile data, I would get "com.android.phone has stopped working".. all other things I fixed myself...
Now, since YOU are modding it... It has to be AWESOME!
Suggestion- Try libs & boot.img from MIUI_gingerbread (link is below).. That is a super powerful ROM.
[before I could try to do this, I was lured by PACman]
http://forum.xda-developers.com/showthread.php?t=2164951
[ROM 2.3] MIUI - 3D performance + smooth + power saving + stable
Going back to GB once my PC is fixed.
Sent from my GT-i9500 using XDA-Developers app

Somcom3X said:
Took you long enough. Jk.
Your the man gk
Too late for me.
My -51 has cracked digitizer.
Time for change. I feel like dinglia
Sent from my SAMSUNG-SGH-T769.
Click to expand...
Click to collapse
No dont go lol
And GK thanks again! Your works are Forcing me to flash GB again
Sent from my GT-N5100 using xda premium

You are the best! I will flash this ASAP.
Sent from my Dragon-U8800Pro using xda-developers app

Hi, thanks for your work.
I wanted to know if it works correctly the headset microphone, meaning if you can make calls with the headset. In miui 1.12.16 don't work (you can only listen).

I'm trying this new rom and it seems good. I can't automatically synchronize the date and time. some help ...: O

best rom
Best rom. Thanks.

marcolnx said:
Hi, thanks for your work.
I wanted to know if it works correctly the headset microphone, meaning if you can make calls with the headset. In miui 1.12.16 don't work (you can only listen).
Click to expand...
Click to collapse
I don't use headset , someone else must confirm this .... sorry.
baggino said:
I'm trying this new rom and it seems good. I can't automatically synchronize the date and time. some help ...: O
Click to expand...
Click to collapse
What do you mean?
Sync is working fine ..
And if you go to settings/date and time, uncheck the first box and change whatever you like.
Edit
First post updated, with instructions for moving dalvik to sd-ext partition, to save more free space for applications.
Sent from my u8800pro using xda premium

gkalenis said:
What do you mean?
Sync is working fine ..
And if you go to settings/date and time, uncheck the first box and change whatever you like.
Click to expand...
Click to collapse
I know how to set the date and time ... but in the automatic mode does not work. This is not a criticism but just point out ...I noticed I Sim slow Starting
thanks for the new rom :good:

THIS ROM IS 2.3 BASED ROM , SO MUST BE ON GINGERBREAD BASEBAND TO FLASH IT.
Click to expand...
Click to collapse
Where can I get that? I don´t even know what gingerbread baseband means :laugh:
I have now 4.0.3 version from Huawei official page but it boots my device several times a day now.

gkalenis said:
I don't use headset , someone else must confirm this .... sorry.
Sent from my u8800pro using xda premium
Click to expand...
Click to collapse
I will check later.
Sent from my SAMSUNG-SGH-T769.
I will check later.
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
Kames said:
Where can I get that? I don´t even know what gingerbread baseband means :laugh:
I have now 4.0.3 version from Huawei official page but it boots my device several times a day now.
Click to expand...
Click to collapse
Flash step 2 of gb
Sent from my SAMSUNG-SGH-T769.

Somcom3X said:
I will check later.
Sent from my SAMSUNG-SGH-T769.
I will check later.
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
Flash step 2 of gb
Sent from my SAMSUNG-SGH-T769.
Click to expand...
Click to collapse
Sorry but what??

Can someone please give me a link for the official GB? It seems that I deleted it from my computer and huawei servers are REALLY slow :/
Sent from my Dragon-U8800Pro using xda-developers app

SvTeam said:
Can someone please give me a link for the official GB? It seems that I deleted it from my computer and huawei servers are REALLY slow :/
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
http://www.mediafire.com/?7dyy01dzy68ns94 it is B572 i always use this for GB

Thanks bro you are a life saver
Sent from my Dragon-U8800Pro using xda-developers app

Installation
get into recovery
wipe data , wipe cache , wipe dalvik , format system , install zip ...
Click to expand...
Click to collapse
Could I have this in newbie-language also?

SvTeam said:
Thanks bro you are a life saver
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
if you know read greek or with help from google translation i made a tutorial with links about anything you want for update or downgrade from froyo to gb and ics and back and recoveries stock and custom here is my tutorial http://www.myphone.gr/forum/showthread.php?t=343712
don't forget to give a thanks

Kames said:
Could I have this in newbie-language also?
Click to expand...
Click to collapse
You're on ics baseband ..
You must download an official GB rom ( the link is 2-3 post behind).
Then make a "dload" folder on your sd card and put step2 from official GB inside the dload folder.
Then insert your sd card and hold vol+ , vol- and power on.
I have a guide for flashing official firmwares , here ... http://forum.xda-developers.com/showthread.php?p=37953739
You can also do the procedure without battery .... hold the 3 buttons and insert usb cable until phone vibrates ... the update will start.
After update finish, delete dload folder from sd card and power on your phone to boot on official GB.
Then you can enter pink screen, change recovery.img and flash CM7.2 MOD....
Sent from my u8800pro using xda premium

tzivas31 said:
http://www.mediafire.com/?7dyy01dzy68ns94 it is B572 i always use this for GB
Click to expand...
Click to collapse
Kames said:
Sorry but what??
Click to expand...
Click to collapse
Do what the above quote says but only do step 2.
Sent from my SAMSUNG-SGH-T769.