Database Users

Upgraded through KIES to FROYO buts stuck at BOOTING & VIBRATES

I have just upgraded to FROYO through KIES after 3 HOURS of waiting.
But my is stuck at boot screen & vibrates..
i had tried the recovery but no use.
please help me...

Take the battery out, try recovery mode again.

Or you didnt uninstall your lagfix before updating.. If so, do a factory reset in the recovery console.

i did that by VOLUME UP + HOME + POWER.
it went into recovery mode i did every thing NO USE.
did wipe all data, factory, format sd card. Still no use.
i heard about hard reset VOLUME DOWN + (press & release) POWER
then clear storage.
BUT HARD RESET is not working for me..

Donald Nice said:
Or you didnt uninstall your lagfix before updating.. If so, do a factory reset in the recovery console.
Click to expand...
Click to collapse
i haven't installed any lagfix

If you are able to enter to download mode then try reflashing via odin it should work.

dalepraneeth said:
I have just upgraded to FROYO through KIES after 3 HOURS of waiting.
But my is stuck at boot screen & vibrates..
i had tried the recovery but no use.
please help me...
Click to expand...
Click to collapse
i had the same problem and just Vol Up+Home+Power then did a factory reset and then it started up normally.
i had the root & lagg fix when i updated to Android 2.2 Optus

Mr.Hunk said:
If you are able to enter to download mode then try reflashing via odin it should work.
Click to expand...
Click to collapse
how much time would it take through ODIN for flashing???

I got the same issue here. And my SGS can not boot into download mode by hold 3 buttons.
Anyone knows what's the option for me now?
Thanks

Hi
I had the same issue it vibrated and didn't boot up. Remove SD Card, go to recovery via VOL UP + HOME + POWER button when you see boot screen releae all buttons. You are in recovery mode. Vol up down and select wipe data/ factory reset, confirm and your device shall boot.
My SGS booted after this and Yes I had OCLF lagfix installed, device rooted which I didn't remove prior to update. Now its fine again.

Now i tried to flash it through ODIN.
It was taking a long time so i stopped
it is displaying this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL] Uploaded with ImageShack.us[/IMG]
now please help me

dalepraneeth said:
Now i tried to flash it through ODIN.
It was taking a long time so i stopped
it is displaying this
[/URL] Uploaded with ImageShack.us[/IMG]
now please help me
Click to expand...
Click to collapse
From this screen you sholud be able to enter in downloadmode. And, but I'm not sure, from this screen Kies should be able to recover the phone too...
Any way:
Always is a solution.... Search here, on forum, about JIG method to unbrick Galaxy S. You have to made a 301kohms rezistor and connect it on 2 pins from a usb cable. You'll see more pictures, it's easy to made it...
This JIG rezistor will always put the phone in download mode. From here you can reflash with Odin any rom you want.
But, if Odin stopped, there are 2 possibilities: you don't have the phones drivers installed corectly, or (and most important) you don't close Kies from Task Manager before launch Odin. If Kies is runing will take the comm port busy and Odin can't use it to comunicate with the phone.
Always close all Kies applications before flashing with Odin. It's very important.
Good luck.

dentimarius said:
From this screen you sholud be able to enter in downloadmode. And, but I'm not sure, from this screen Kies should be able to recover the phone too...
Click to expand...
Click to collapse
I did not find that recovery.....
does that have to work if KIES pops some recovery of os????

please tell me a way to flash back to
original DDJG4 india firmware...
and is it possible to upgrade to FROYO using KIES after flashing???

have you tried adb search youtube for a tutorial. you can reboot/recovery or download and much much more.
MAKE SURE YOU ARE IN DEBUGGING MODE WITH ADB. and i take out the sim card and ext sd card.
you use commands like c:\androidsdk\tools\adb reboot download
c:\androidsdk\tools\adb reboot recovery
c:\androidsdk\tools\adb reboot
also try apk 3.0 this lets you install apk's via your pc right to your phone, search for z4root apk on this site and use adb to reboot into recovery to apply update.zip
hope this helps, i also have no 3 button combo

dalepraneeth said:
Now i tried to flash it through ODIN.
It was taking a long time so i stopped
it is displaying this
[/URL] Uploaded with ImageShack.us[/IMG]
now please help me
Click to expand...
Click to collapse
Not sure why you would purposly stop Odin while it was running. All you are doing is creating a worse and worse situation for yourself by doing things like that.
It seems to me that you do not know enough about flashing, etc to even be concidering doing so, so... I reccomend that after you finally get your device up and running again that you ONLY flash through Kies and dont do anything else as you will likely end up with one issue after the other...

yiannisthegreek said:
Not sure why you would purposly stop Odin while it was running. All you are doing is creating a worse and worse situation for yourself by doing things like that.
It seems to me that you do not know enough about flashing, etc to even be concidering doing so, so... I reccomend that after you finally get your device up and running again that you ONLY flash through Kies and dont do anything else as you will likely end up with one issue after the other...
Click to expand...
Click to collapse
personally it amazes me when i read some of the horror stories on this site, i find it very couragous that anyone would attempt this without proper research, .
some of the complex hacks i am seeing just aren't needed, yet people risk bricking their phones. Anyway good luck to all who venture in to flashing, you dont learn if you dont try and without mistakes we would not learn as much so thankyou i know no what not to do hi.

I got into the download mode finally by the hairdryer method and load the original optus jg4 rom into the phone, then upgrade to froyo again.
Now everything works fine.

jamyi said:
I got into the download mode finally by the hairdryer method and load the original optus jg4 rom into the phone, then upgrade to froyo again.
Now everything works fine.
Click to expand...
Click to collapse
I searched about the hairdryer method but I don't find anything. Can you help me with a link please?

jamyi said:
I got into the download mode finally by the hairdryer method and load the original optus jg4 rom into the phone, then upgrade to froyo again.
Now everything works fine.
Click to expand...
Click to collapse
I searched about the hairdryer method but I don't find anything. Can you help me with a link please?

[Q] Brick phone maybe? help me out

So I got a htc mytouch 4g And it has that phone icon with a triangle and exclamtion mark. I dont know anything about this phone since I have a att captivate From what I read is that if you have recovery you might be able to do it.
Also when I plug in the usb I go into recover and I Get a fasboot screen and other sorts of menus i have put a pd15img.zip in my external sd card and it loads installs It I guess but still boots into the same Icon.
from what I also read is that you can fix this by loading a stock rom pushing into your sdcard via adb but make sure is name update.zip but when I do that I get Invalid Operation.
when in recovery I have this message E:cant't open /cache/recovery/command also phone boots right into that icon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I assume this is a soft brick since I get into recover and the other fasboot menu when I plug in USB any help is appreciated
This is my first time with a phone like this so I'm doing what I would normaly do with a captivate ish

I answered in your other thread here. However, now that you've posted a screenshot, I see that the phone isn't even rooted. I have no idea how you get into a custom recovery without root.

I connect usb while the phoneis off and then press volume up + power and that appears.

chibixzero said:
I connect usb while the phoneis off and then press volume up + power and that appears.
Click to expand...
Click to collapse
Yeah, see where it says "S-ON"? That means the phone isn't rooted. You need to perm root and it install CWM recovery, but with those cache errors you're getting, I'm not sure there's any point since those usually indicate a failed eMMC.

Guess my options are
1. call t-mobile and tell them what happen maybe they will replace it but I didnt buy it with contract I'm att and was going to ask my friend to get me unlock code, But idk if its possible I drop it and theres a crack on the phone
2. sell it for parts...
>.< money down the drain I guess fuggin phone

You're booting into stock recovery by default, that's the "triange". That might happen if you have a VolumeDown key/trackpad stuck.
The error in the recovery is natural - stock recovery expects a command when booted into, but finds nothing.
Check that you're indeed installing a correct PD15IMG that contains a complete system image, and if you are and it still doesn't help - try to shake the phone on the side / upside down, to try and release the possibly stuck buttons. If it doesn't help - the phone needs warranty repair. T-Mobile or HTC directly, your choice. To send it to HTC, you pay the shipping. But in any case it's under warranty, unless it has water damage or something.

download this go into fastboot/bootloader then run the ruu and flash, if after this u still get to recovery than its something else.
http://dl.dropbox.com/u/25823285/RUU_Glacier_Gingerbread_S_Videotron_CA_2.10.1530.1_Radio_12.55.60.25_26.09.04.26_M_release_188466_signed.exe

atifsh said:
download this go into fastboot/bootloader then run the ruu and flash, if after this u still get to recovery than its something else.
http://dl.dropbox.com/u/25823285/RUU_Glacier_Gingerbread_S_Videotron_CA_2.10.1530.1_Radio_12.55.60.25_26.09.04.26_M_release_188466_signed.exe
Click to expand...
Click to collapse
That appears to be the Gingerbread leak from the Canadian HTC Panache, but you might want to describe to the OP what exactly it is. Most people won't blindly flash something to their phone without a little info first. Also, could that be flashed to a non-rooted device?

yes thats the official RUU of panache which is glacier inside.
yes u can flash as its RUU.exe u dont need root.
u can even comeback to official mytouch RUU.zip using this exe later if wanted.
because its exe it will reflash everything boot, recovery, splash, radio every thing, thus fixing any problem thats not hardware.

atifsh said:
download this go into fastboot/bootloader then run the ruu and flash, if after this u still get to recovery than its something else.
http://dl.dropbox.com/u/25823285/RUU_Glacier_Gingerbread_S_Videotron_CA_2.10.1530.1_Radio_12.55.60.25_26.09.04.26_M_release_188466_signed.exe
Click to expand...
Click to collapse
i used this as noted but I get this error
Customer ID error (131) I read on these forums is has something todo with a goldcard?
Edit-
I manage to load a stock rom into a External sd card. it updated it everything pass exept step 8 it skip it and the said finish updateing press power to reboot. Rebooted but the whole (second) mytouch splash was going for a long time. I try to use the RUU.exe and it wont boot into bootloatder just boots and stays on the splash screen.
this is what I get now and is stuck on That screen updating radio

Damn.
That would be the first completely stock Mytouch4G in the forum that has a failed eMMC chip.
Yes, it's bricked, you need to exchange it.
But it's also a good proof that gfree has nothing to do with failed eMMC, extra write cycles of flashing ROMs most probably just speed up the destruction process.

you got one large scratch on screen, how good have you kept your phone? have you droped it badly once or twice?
when you used the RUU.exe when did u get that error, does it go upto where it showed you the rom version?
if u got there than you can try one more time but this time with official mytouch RUU.zip. i'll tell you how to do that, later if u got upto that part.

edit nevermind my post cameback above this

If it shows "Fail-PU" in bootloader - then the eMMC isn't functional anymore. No flashing will help him in this case, only warranty repair.

hmm too bad, feel sorry for him

[How to] Use RSD Lite to flash .SBF/Firmware Droid 2 (2014)

May take sometime to edit this
so start here http://goo.gl/WYQY4O
YouTube Flashing SBF w/rsd lite on D2, D2G & R2D2
YouTube How to SBF the Droid 2 using rsd lite -by Tomsgt123
1. download and install RSD Lite 5.7 ,other versions may work fine
2. download your recovery firmware image (.sbf or .xml) try looking here or here
2.3.4
if ends in .gz, .7z,or .rar uncompress with 7 Zip or other file-compression utility
if it ends in .zip rsd lite can uncompress it for you
3. install moto drivers
open rsd Lite
select your recovery firmware click on “...” (top middle, see pics below...)
boot moto device to bootloader
connect to pc via usb
usb data cable (original motorola prefered)
usb port, rear ports are normally better than front
to view Device Properties, click on S Flash, under Model column
if rsd lite can not see you device read Driver errors
select Start
error: if you see MEM_MAP Blank, on the phone, you use an incompatible file, try the newest version
make sure file is for you device model
Wiping Data:
before (or after) flashing sbf, wiping data in android recovery is recommended
if you choose not to wipe data, at least wipe cache, if phone bootloops you have no choice, but to wipe data
Bootlooping
if phone starts bootlooping, and you can not get to recovery try
pull battery,
press and hold R,
reinsert battery, if it does not start to boot, press power,
when you see !, triangle, and Andy, release R,
then press both volume buttons to continue to android recovery
Notice: if you disconnect phone from pc, before phone has finished rebooting, and then try to close rsd lite, you may get a warning from rsd lite, about damaging your device
don’t worry about it phone will be fine, as long as flashing is done
Activation and skipping activation:
if phone reboots to activation screen, touch android to activate or if you do not wish to activate with verizon, use four corners activation skip
[Video] How to bypass activation on the Droid 2 -Tomsgt123
also if phone does not boot to activation screen, it may be necessary to dial *228+ to reconnect to verizon
DF [INFO] can not activate phone/ no dial pad on *228/
XDA [INFO] No keypad during activation work around (dial *228+)
Dial *22891 to update the PRL or *22899 to program the phone and update the PRL both
if rsd Lite is not working correctly try running as administrator, and/or disabling virus protection
driver errors

Firmware/SBFs, Drivers, RSD lite mirrors
Droid 2 (a955) Bootloader = D2.37
latest?, software version 2.3.4/ 4.5.621 aka 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf
*http://sbf.droid-developers.org/phone.php?device=25
*https://mega.co.nz/#F!MJgmWAQC!S6IfUk_1oFsU-U3dgWVJ9Q
*http://d-h.st/users/sd_shadow/?fld_id=25708#files
*https://sites.google.com/site/motosbf/droid-2-sbf-files​
R2D2 (a957)
Bootloader = D2.37
latest?, software version 2.3.4/ 4.5.622 1FF-p2a_droid2_r2d2_cdma_droid2_r2d2-user-2.3.4-4.5.1_57_DR4-52-120118-release-keys-signed-Verizon-US.sbf
*http://sbf.droid-developers.org/phone.php?device=25
*http://d-h.st/users/sd_shadow/?fld_id=25708#files
*https://sites.google.com/site/motosbf/droid-2-r2d2-sbf-files​Droid 2 Global (a956) Bootloader = D0.11
latest?, software version 2.3.4/ 4.5.629
aka 1FF-p3_droid2we_cdma_droid2we-user-2.3.4-4.5.1_57_D2GA-59-120117-test-keys-signed-Verizon-US.sbf*http://sbf.droid-developers.org/phone.php?device=25
*http://d-h.st/users/sd_shadow/?fld_id=27764#files
*https://www.androidfilehost.com/?a=show&w=files&flid=5675
*https://sites.google.com/site/motosbf/droid-2-global-sbf-files​

MEM-MAP Blank error
If you see something like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You may have flashed incompatible firmware

reserved

thenugdestrroyer said:
Ok flash is completed and after phone reboot bootlosder now says mem_map blank service regd battery ok ok to program .?? Now what? I haven't touched it yet
Click to expand...
Click to collapse
if you get bootloader errors try the newer 4.5.621.A955.sbf here http://sbf.droid-developers.org/phone.php?device=25

thenugdestrroyer said:
Do o downloaded all the sbf files ,pretty sure the one that I.first tried was the newest..so not sure
Click to expand...
Click to collapse
No you downloaded
1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf
now try
1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf

@thenugdestrroyer l battery low can not program means you must charge battery
if you do not have a spare battery, you will need a spare battery charger or a TBH Factory cable adaptor
http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm
or
http://www.ebay.com/itm/Wall-Home-A...S_Cell_Phone_PDA_Chargers&hash=item485a35be0d

sd_shadow said:
@thenugdestrroyer l battery low can not program means you must charge battery
if you do not have a spare battery, you will need a spare battery charger or a TBH Factory cable adaptor
http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm
or
http://www.ebay.com/itm/Wall-Home-A...S_Cell_Phone_PDA_Chargers&hash=item485a35be0d
Click to expand...
Click to collapse
I dont see that file

thenugdestrroyer said:
I dont see that file
Click to expand...
Click to collapse
see attachment

not that it matters till you charge battery

sd_shadow said:
not that it matters till you charge battery
Click to expand...
Click to collapse
So when I plug phone into charger it says battery ok now..does this mean its taking charge?

thenugdestrroyer said:
So when I plug phone into charger it says battery ok now..does this mean its taking charge?
Click to expand...
Click to collapse
no, anytime you use a battery, then stop using it, the battery will recovery some, just the way batteries work. If you do not see the charging screen the battery is not charging, but you can try flashing if you want.

thenugdestrroyer said:
So when I plug phone into charger it says battery ok now..does this mean its taking charge?
Click to expand...
Click to collapse
O this phone has kicked my ass .I've rooted it twice now and managed to get it exactly where I did last time..same deal..happened when flashing liberty rom..if and when this works again I'm running steel droid only
sd_shadow said:
no, anytime you use a battery, then stop using it, the battery will recovery some, just the way batteries work. If you do not see the charging screen the battery is not charging, but you can try flashing if you want.
Click to expand...
Click to collapse

thenugdestrroyer said:
O this phone has kicked my ass .I've rooted it twice now and managed to get it exactly where I did last time..same deal..happened when flashing liberty rom..if and when this works again I'm running steel droid only
Click to expand...
Click to collapse
you can't use old roms on a phone with a locked bootloader, if the current kernel is not compatible.
There are several roms that work in my list of 621 Roms (http://goo.gl/7gtp2e)

[HELP] LG G2 bricked after install TWRP

After i have installed my TWRP i think my LG g2 have bricked
After i restart my phone this is the only thing that appers to me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(the blue mark its not problem, always have that)
I know that look like the screen is cracked but the screen was allright until i restart my phone,
please help me

That may just be the white line issue? I have not actually seen it myself but if you do a quick search you should be able to fix it. Worst case you can just boot into download mode and restore to stock, it is software based since it happened after a flash.

The white line issue occurs if you flash a kernel or recovery which is meant for the JDI display but you migh have an LGD. Look or your twrp you flashed is meant for only one. I suggest to check out dr87 twrp recovery since it has display detection.
You didn't bricked your phone, maybe a bit softbricked but further nothing to worry about.

Hi, thanks for the replys
My only problem is that when i connect my phone to my pc doesn't connect it, and only appears the white lines
Can you help me?

wulsic said:
The white line issue occurs if you flash a kernel or recovery which is meant for the JDI display but you migh have an LGD. Look or your twrp you flashed is meant for only one. I suggest to check out dr87 twrp recovery since it has display detection.
You didn't bricked your phone, maybe a bit softbricked but further nothing to worry about.
Click to expand...
Click to collapse
Hi, can you tell me some advices to try to recover my phone to life?
Thanks

Eriio said:
Hi, can you tell me some advices to try to recover my phone to life?
Thanks
Click to expand...
Click to collapse
you can flash maybe with adb sideload in the recovery another kernel,
you can go to download mode and restore to stock.
Is your screen completely white or white lines?

wulsic said:
you can flash maybe with adb sideload in the recovery another kernel,
you can go to download mode and restore to stock.
Is your screen completely white or white lines?
Click to expand...
Click to collapse
I can't, my lg g2 do not connect to my computer, my computer only detect adb android and not my phone.
When i start my phone nothing appens, only the white lines and thats all!
I tried everything but i cant go to download mode, i think the phone does not start

Eriio said:
I can't, my lg g2 do not connect to my computer, my computer only detect adb android and not my phone.
When i start my phone nothing appens, only the white lines and thats all!
I tried everything but i cant go to download mode, i think the phone does not start
Click to expand...
Click to collapse
Wait after you've installed it... Did you install it with a app within Android?
If so then I think it might've flashed it wrong to maybe a wrong partition or what, I will search for you.

wulsic said:
Wait after you've installed it... Did you install it with a app within Android?
If so then I think it might've flashed it wrong to maybe a wrong partition or what, I will search for you.
Click to expand...
Click to collapse
Actually i dont know, the only think i know is that i used to have a recovery installed and I install TWRP too, and when i restart the phone it started with the white lines and do not connect to computer

Eriio said:
Actually i dont know, the only think i know is that i used to have a recovery installed and I install TWRP too, and when i restart the phone it started with the white lines and do not connect to computer
Click to expand...
Click to collapse
I've didn't found really much but you could also check in general/ google for people with the same problem and if nothing works then you have to try that unbricking thing guide where you have to reflash partitions etc.

wulsic said:
I've didn't found really much but you could also check in general/ google for people with the same problem and if nothing works then you have to try that unbricking thing guide where you have to reflash partitions etc.
Click to expand...
Click to collapse
But how can i reflash a partition if my computer dont even recognize my phone?

Eriio said:
But how can i reflash a partition if my computer dont even recognize my phone?
Click to expand...
Click to collapse
The thing is that you need to open your phone then so that's risky. I suggest to google for people with the same problem and maybe search if there's a fix else you maybe got to sell your phone or try that risky way to fix it.

wulsic said:
The thing is that you need to open your phone then so that's risky. I suggest to google for people with the same problem and maybe search if there's a fix else you maybe got to sell your phone or try that risky way to fix it.
Click to expand...
Click to collapse
No one is to stupid to make the same thing that i have made.
There is none problem like mine

Try going to the download mode by powering off the phone completely then holding the vol up button and inserting the USB cable. The usb cable must be connected to your computer.

Eriio said:
After i have installed my TWRP i think my LG g2 have bricked
After i restart my phone this is the only thing that appers to me:
(the blue mark its not problem, always have that)
I know that look like the screen is cracked but the screen was allright until i restart my phone,
please help me
Click to expand...
Click to collapse
mate i have same problem. How can u solve ? plz help me

cnaukai said:
mate i have same problem. How can u solve ? plz help me
Click to expand...
Click to collapse
Hi
There's no problem! I'll explain to you.
The problem is you have a bad kernel instaled and that's why you have the lines. When you power on your phone you can't see but there's a message related to "NO Recovery mode, No download mode", it's "Secure booting error".
So you have to follow all the steps on this tutorial:
http://forum.xda-developers.com/showthread.php?t=2582142
When you have all that done you'll have your phone back!!
The only problem will be (at least for me) the lines will be there in the same, so you have to find the best kernel to your rom
I think that's all, GOOD LUCK!!

Eriio said:
Hi
There's no problem! I'll explain to you.
The problem is you have a bad kernel instaled and that's why you have the lines. When you power on your phone you can't see but there's a message related to "NO Recovery mode, No download mode", it's "Secure booting error".
So you have to follow all the steps on this tutorial:
http://forum.xda-developers.com/showthread.php?t=2582142
When you have all that done you'll have your phone back!!
The only problem will be (at least for me) the lines will be there in the same, so you have to find the best kernel to your rom
I think that's all, GOOD LUCK!!
Click to expand...
Click to collapse
adb not working. No fastboot is there any other way

cnaukai said:
adb not working. No fastboot is there any other way
Click to expand...
Click to collapse
You don't need fastboot!
If you follow all the instructions it will work (i think in the windows too, don't remember if I made it on windows or linux).
You have to install all the drivers, and then you'll do it
If you can't do it, try this:
https://www.youtube.com/watch?v=QK40sjiDq0Y
But i have made the same thing that i sent you (link of xda) and that worked for me!

Eriio said:
You don't need fastboot!
If you follow all the instructions it will work (i think in the windows too, don't remember if I made it on windows or linux).
You have to install all the drivers, and then you'll do it
If you can't do it, try this:
https://www.youtube.com/watch?v=QK40sjiDq0Y
But i have made the same thing that i sent you (link of xda) and that worked for me!
Click to expand...
Click to collapse
How can i run fastboot mode phone

cnaukai said:
How can i run fastboot mode phone
Click to expand...
Click to collapse
You don't need to run anything, when you turn on your phone you don't see but appear a error message. Then if you follow all the instructions (commands) in the tutorial of xda you'll have to delete the img on your phone and replace them with the new ones!
Then you install the original rom or the rom you choose and when it work you'll have to find the best kernel!
If you leave a comment on the tutorial they will help you better!
Anyway you can ask me anything!!
Good Luck!

[HELP HARD BRICK QUALCOMM] Huawei Y6 (SCL-L21) dead

Hello Everyone, my Huawei Y6 (SCL-L21) is dead, it doesn't power up anymore so no fastboot or recovery (I think damaged GPT Table), when I connect it to my pc, I have a qualcomm serial port and phone's led start blinking red...
Let me say that I have the original firmware downloaded some time ago (it's an UPDATE.APP) and looking inside that file I found the original GPT table (and all the others partitions), so I think that nothing is lost!
So I need help restoring the firmware using tools like QPST or any tool that can "rewrite" my original firmware, any advice or help to guide me in this journey?
P.S: Here's some partitions found inside the original GPT table (with a tool that I developed for this "occasion" [sorry for the software name])
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Darkness1 said:
Hello Everyone, my Huawei Y6 (SCL-L21) is dead, it doesn't power up anymore so no fastboot or recovery (I think damaged GPT Table), when I connect it to my pc, I have a qualcomm serial port and phone's led start blinking red...
Let me say that I have the original firmware downloaded some time ago (it's an UPDATE.APP) and looking inside that file I found the original GPT table (and all the others partitions), so I think that nothing is lost!
So I need help restoring the firmware using tools like QPST or any tool that can "rewrite" my original firmware, any advice or help to guide me in this journey?
P.S: Here's some partitions found inside the original GPT table (with a tool that I developed for this "occasion" [sorry for the software name])
Click to expand...
Click to collapse
Is ur boot loader unlocked

Amaan007 said:
Is ur boot loader unlocked
Click to expand...
Click to collapse
Yes, it was unlocked (before flashing a wrong rom, overwriting the damned gpt)

Darkness1 said:
Yes, it was unlocked (before flashing a wrong rom, overwriting the damned gpt)
Click to expand...
Click to collapse
Extract system IMG ,boot.IMG and recovery IMG and flash them with fastboot

Amaan007 said:
Extract system IMG ,boot.IMG and recovery IMG and flash them with fastboot
Click to expand...
Click to collapse
Sorry, but if you look at my first post you will see that my phone doesn't power up anymore, so fastboot it's impossible (that's why I wrote Hard Brick)

Darkness1 said:
Sorry, but if you look at my first post you will see that my phone doesn't power up anymore, so fastboot it's impossible (that's why I wrote Hard Brick)
Click to expand...
Click to collapse
OK take the battery out connect the phone to a PC and then hold down volume down before connecting and of boots up to fastboot put the if it boots up put the battery back in and let it charge for 10 mins and the flash stock rom
Sent from my GT-I9506 using Tapatalk

Amaan007 said:
OK take the battery out connect the phone to a PC and then hold down volume down before connecting and of boots up to fastboot put the if it boots up put the battery back in and let it charge for 10 mins and the flash stock rom
Sent from my GT-I9506 using Tapatalk
Click to expand...
Click to collapse
Already tried hundreds of times but do not work, that's why I say that it's Hard Bricked, GPT is dead and gone, so every Huawei method will not work (even putting dload folder with UPDATE.APP on an sd card)

Darkness1 said:
Already tried hundreds of times but do not work, that's why I say that it's Hard Bricked, GPT is dead and gone, so every Huawei method will not work (even putting dload folder with UPDATE.APP on an sd card)
Click to expand...
Click to collapse
hello,yesterday i have scl-l21 bad emmc health.
n now i've change with new emmc.unfortunately my phone cant't connect to network.i'n need to unlock bootloader.so i went to huawei unlock page.after get unlock code,but it come useless.remote say invalid code.can you upload your sbl1 n aboot partition for me?
after that,i'll give you rawprogram0.xml,so you cant revive your phone from bricked.thanks

vrizz said:
hello,yesterday i have scl-l21 bad emmc health.
n now i've change with new emmc.unfortunately my phone cant't connect to network.i'n need to unlock bootloader.so i went to huawei unlock page.after get unlock code,but it come useless.remote say invalid code.can you upload your sbl1 n aboot partition for me?
after that,i'll give you rawprogram0.xml,so you cant revive your phone from bricked.thanks
Click to expand...
Click to collapse
Here's your files, taken from the stock firmware of scl-l21
https://sendit.cloud/8rqxtnkl2fc7
https://sendit.cloud/xfbbpl0v631r
Did you replace your emmc? or did you recovered from hard brick?

https:// drive.google. com/file/d/1ZPHjWy1qqF1g9OP6s7DLbJxpH0vNNHL6/view
those my backup

When you connect your phone with your pc is it detected at all?
-If yes,
What's the driver's name?
Does the name of it include something like HS-USB?
Please let me know if your phone haven't been repaired yet.

when i connect huawei scl-u31 it appears like " unkown device" in device manager !! i installed drivers qualcoom but always shown unkonwn device!!!
what to do?