Related
Hi All
Thank you for the great work however in order to enjoy the ROMS I will need to have a smaller boot.img in order to flash the roms.
The image must be 2.35 MB at most, A good example is the Enomther ROM that is flashable.
However the CM6 roms are not (except KANG O RAMA).
Since I dont think that someone is going to do it for me, can you at least explain how can I do that?
There are at least 10 more people that check this forum regulary looking for a solution.
Thank you.
CM6 boot image is just 2.25MB!!!
OHH yea.... checked it out on his site yesterday, then how come rodriguez's image is bigger?
He's most probably using another kernel for CM6, just like MicroMod uses another kernel for TheOfficial.
OK. How can I use those features with a smaller kernel? Is there a way?
1) Ask the kernel / ROM creator to "pack" it to fit in 2.5MB of space.
2) Compile your own kernel and make your own boot.img.
3) Try to mix your desired ROM (for example, Micromod's) with the kernel that fits your limited boot space (for example, Enomther's original). Or you could try to use rodriguez's ROM with CM kernel. To do that mix, replace the boot.img and the WiFi driver - bcm4329.ko - in their locations in the original ROM zip and resign the zip, then flash it.
Why the need for a smaller boot.img?
Sent from my Nexus One using XDA App
HTCinToronto said:
Why the need for a smaller boot.img?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Many N1s do not allow kernels later than 2.4MB (or something like that)... the kernel does not flash because of bad MTD blocks...
Jack_R1 said:
1) Ask the kernel / ROM creator to "pack" it to fit in 2.5MB of space.
2) Compile your own kernel and make your own boot.img.
3) Try to mix your desired ROM (for example, Micromod's) with the kernel that fits your limited boot space (for example, Enomther's original). Or you could try to use rodriguez's ROM with CM kernel. To do that mix, replace the boot.img and the WiFi driver - bcm4329.ko - in their locations in the original ROM zip and resign the zip, then flash it.
Click to expand...
Click to collapse
OK. Thanks.
Can you send me a link with the instructions on how to change and resign roms?
[sorry for being a noob]
Unfortunately, I don't have any instructions available anywhere, but you can use some Google searching.
The boot.img resides in the root of the ZIP, the bcm4329.ko is in /system/lib/modules/.
Changing the files in the ROM is easy - ROM is just a ZIP file, you take a ROM you want to change, open it in WinZip / WinRar / your favorite freeware archiver, find the files you want to replace (the ones I've mentioned above), download the original ROM which is the base (Enomther for MicroMod, CM6 for Rodriguez), extract those files from there, drag&drop them into the ROM you're modifying, that's it.
Then you search Google for "android sign zip apk", and you get a couple of guides that show you how to sign ZIPs.
Then you load the ROM and hope it works.
does not sound complicated
thanks.... I will try that.
Yes, what you need is:
boot.img and everything in /system/lib/modules
It's important that you replace everything in /system/lib/modules with the correct content for the specific boot.img you're using and delete everything else.
My boot.img which is based on Wildmonks BFS 950 kernel supports apps2ext and 720p and should be sufficient for any CM6 rom. It's worth noting that the current one in Kang-o-rama 1.0 Final is not as stable as I would like and I'll be updating it soon.
Since this seems a bit challenging for some rom devs an alternative approach could be:
Create update.zip for small boot image (I can help with this)
Rom dev creates rom update.zip without a kernel (may not boot properly)
Install rom without kernel
Install small kernel update.zip
Or everyone could use Kang-o-rama...
Hey guys,
you probably don't know me, but I have created a custom rom for our Galaxy 3 based on Froyo.
It comes with both, the TW Launcher and the stock launcher, Launcher2.
So YOU are able to choose one of them.
It has modiefied framework-res.apk and twframework-res.apk too (Gingerbread look).
And last but not least, I rebuild the zImage kernel for speed and this is probably the first DEODEXED rom avaiable for Galaxy 3.
The only PROBLEM is, that my rom comes an an update.zip package which i cannot sign with the samsung key since I don't have it.
So if you guys could manage to create a custom recovery that lets us apply update.zip packages like in times of ECLAIR, we could use my rom.
So I need you guys to to this.
Then we can use my deodexed, optimized froyo rom.
rayman33 said:
Hey guys,
you probably don't know me, but I have created a custom rom for our Galaxy 3 based on Froyo.
It comes with both, the TW Launcher and the stock launcher, Launcher2.
So YOU are able to choose one of them.
It has modiefied framework-res.apk and twframework-res.apk too (Gingerbread look).
And last but not least, I rebuild the zImage kernel for speed and this is probably the first DEODEXED rom avaiable for Galaxy 3.
The only PROBLEM is, that my rom comes an an update.zip package which i cannot sign with the samsung key since I don't have it.
So if you guys could manage to create a custom recovery that lets us apply update.zip packages like in times of ECLAIR, we could use my rom.
So I need you guys to to this.
Then we can use my deodexed, optimized froyo rom.
Click to expand...
Click to collapse
question: what deodexed means??? i never heard that word before...
why this isnt in dev forum?
Thats good buddy.... Plz upload the zImage kernel with Deodexed
ready to try
Need some more information
Ok buddy,
I'll upload it...let's see..
maybe tomorrow after school.
But can you tell me : For theming and so on,
what needs to be deodexed ?! I only deodexed /system/app .
Does /system/framework also need to be deodexed ?!
AND : GOOD NEWS :
I succesfully created a flashable ODIN package based on XXJPA, which is deodexed in /system/app !
So please tell me if I should deodex /system/framework !
I'll add the Kernel and all the other stuff in my 2nd release
STAY TUNED BUT HELP ME .
rayman33 said:
Ok buddy,
I'll upload it...let's see..
maybe tomorrow after school.
But can you tell me : For theming and so on,
what needs to be deodexed ?! I only deodexed /system/app .
Does /system/framework also need to be deodexed ?!
AND : GOOD NEWS :
I succesfully created a flashable ODIN package based on XXJPA, which is deodexed in /system/app !
So please tell me if I should deodex /system/framework !
I'll add the Kernel and all the other stuff in my 2nd release
STAY TUNED BUT HELP ME .
Click to expand...
Click to collapse
If possible, could you PM the instructions on how to deodex a ROM?
Sent from my Samsung Galaxy 3 FROYO
great now we can modify the indivisual apps in the samsung...crap.......
and yes i thinkthe framework folder also needs to be deodexed...
right now we can only modify /hack the framework-res.apk and twframework-res.apk as they do not have odex files with them i.e deodexed....
while others are odexed...
this is the first great step to galaxy 3 custom roms and from that i mean great roms....
Instructions
So for you guys, here is the instruction for deodexing .
First, go to youtube and follow the video instructions of nokia7vista's tutorial for creating a custom rom for Samsung Galaxy S.
(Download a base rom that you want to customize (i.e. XXJPF) and download and install magiciso to open the factoryfs.rfs from XXJPF (in magic iso, go to open and then select all files, then you can open factoryfs.rfs). When you have done this, extract the content of factoryfs.rfs to your desktop and put it into a folder called "System". Put the folder "System" into a new folder called "CFW". Now you have to download the rombasics.zip based on JPA FROYO, which are found in another post in the xda - Forum in the development section. (Sorry I'm a new user so i'm not allowed to post links. When I am, I'll do !
Then, put the content of rombasics.zip into the folder "CFW".
After that, follow nokia7vista's tutorial part 4 to install cygwin correctly and install the HTC Android kitchen.
When you followed the tutorial, you should know how to start the kitchen (open cygwin, cd to folder where you placed the kitchen and type "./menu" (without quotes ).
And in the kitchen, you must first do nr. 1 (building working folder from the folder "CFW"). Then, you can type 0 to access the advanced options and type 11 to deodex. Easily select if you only want to deodex either only /system/app or only /system/framework or both.
AFTER you have followed all these steps, you have to select 99 in the kitchen. This will set up "CFW.zip" in the /kitchen/output folder.
When this is finished, you have to extract the "CFW.zip" and copy the factoryfs.rfs to any Froyo based ROM for Galaxy 3 you like.
THEN you're done
rayman33 said:
So for you guys, here is the instruction for deodexing .
First, go to youtube and follow the video instructions of nokia7vista's tutorial for creating a custom rom for Samsung Galaxy S.
(Download a base rom that you want to customize (i.e. XXJPF) and download and install magiciso to open the factoryfs.rfs from XXJPF (in magic iso, go to open and then select all files, then you can open factoryfs.rfs). When you have done this, extract the content of factoryfs.rfs to your desktop and put it into a folder called "System". Put the folder "System" into a new folder called "CFW". Now you have to download the rombasics.zip based on JPA FROYO, which are found in another post in the xda - Forum in the development section. (Sorry I'm a new user so i'm not allowed to post links. When I am, I'll do !
Then, put the content of rombasics.zip into the folder "CFW".
After that, follow nokia7vista's tutorial part 4 to install cygwin correctly and install the HTC Android kitchen.
When you followed the tutorial, you should know how to start the kitchen (open cygwin, cd to folder where you placed the kitchen and type "./menu" (without quotes ).
And in the kitchen, you must first do nr. 1 (building working folder from the folder "CFW"). Then, you can type 0 to access the advanced options and type 11 to deodex. Easily select if you only want to deodex either only /system/app or only /system/framework or both.
AFTER you have followed all these steps, you have to select 99 in the kitchen. This will set up "CFW.zip" in the /kitchen/output folder.
When this is finished, you have to extract the "CFW.zip" and copy the factoryfs.rfs to any Froyo based ROM for Galaxy 3 you like.
THEN you're done
Click to expand...
Click to collapse
oh ... can you make deotexed (system app & framework) rom based on jpf ?
rayman33 said:
So for you guys, here is the instruction for deodexing .
First, go to youtube and follow the video instructions of nokia7vista's tutorial for creating a custom rom for Samsung Galaxy S.
(Download a base rom that you want to customize (i.e. XXJPF) and download and install magiciso to open the factoryfs.rfs from XXJPF (in magic iso, go to open and then select all files, then you can open factoryfs.rfs). When you have done this, extract the content of factoryfs.rfs to your desktop and put it into a folder called "System". Put the folder "System" into a new folder called "CFW". Now you have to download the rombasics.zip based on JPA FROYO, which are found in another post in the xda - Forum in the development section. (Sorry I'm a new user so i'm not allowed to post links. When I am, I'll do !
Then, put the content of rombasics.zip into the folder "CFW".
After that, follow nokia7vista's tutorial part 4 to install cygwin correctly and install the HTC Android kitchen.
When you followed the tutorial, you should know how to start the kitchen (open cygwin, cd to folder where you placed the kitchen and type "./menu" (without quotes ).
And in the kitchen, you must first do nr. 1 (building working folder from the folder "CFW"). Then, you can type 0 to access the advanced options and type 11 to deodex. Easily select if you only want to deodex either only /system/app or only /system/framework or both.
AFTER you have followed all these steps, you have to select 99 in the kitchen. This will set up "CFW.zip" in the /kitchen/output folder.
When this is finished, you have to extract the "CFW.zip" and copy the factoryfs.rfs to any Froyo based ROM for Galaxy 3 you like.
THEN you're done
Click to expand...
Click to collapse
please post your deodexed rom, atleast we can get to know if it works for g3 or not
is it working for you??
after deodexing what advantages have you taken of that???
So my deodexed base ROM so far has not booted.
Any reason why?
Custom Rom (XXJPA)
@DarkLestat :
My custom rom (deodexed) is working, yes. But I think it's way to slow to use it every day because it's based on JPA.
When you gyus want me to release a super fast and super stable deodexed rom, which I'm actually able to build, you have to share the rombasics.zip based on XXJPF.
If anyone could do that, that would be great.
rayman33 said:
@DarkLestat :
My custom rom (deodexed) is working, yes. But I think it's way to slow to use it every day because it's based on JPA.
When you gyus want me to release a super fast and super stable deodexed rom, which I'm actually able to build, you have to share the rombasics.zip based on XXJPF.
If anyone could do that, that would be great.
Click to expand...
Click to collapse
I'm using Gsam101's JPA Clean ROM with the ronbasics for JPA.
is that a reason?
How exactly did you get the factoryfs.rfs from the CFW.zip? All my .zip has are the folders I zipped into it, and its supposedly the finished ROM?
Sent from my Samsung Galaxy 3 FROYO
How would i go about creating a factoryfs.rfs?
EDIT: Anyone?
CFW.zip ?!
Ehhhhm...DarkLestat... If I#m understanding right, you wanna build a custom rom with an update.zip package..
If you are doing so, let me say that it don't works since samsung has implemented a new recovery in Froyo builds which don't allows us to flash the update.zip packages anymore.
You actually have to create a flashable odin package.
(including cache.rfs, datafs.rfs, factoryfs.rfs, modem.bin and zImage)
After you have done that, repack these files to a odin .tar package with the following commands in cygwin : (after you cd'd to your rom's folder)
Code:
tar -H ustar -c cache.rfs datafs.rfs factoryfs.rfs modem.bin zImage > output.tar
@The Dark Lestat: What's the source? JPF or older?
i have deodexed the jpf system/app all contents except settings .
deodexing settings causes loopback boot and phone does not boot.....
though i am verifying but deodexing is great....
i have tried changing the icons of apps, now they work, in odexed they were'nt...
though the gallery app, music player seems to be slower
spl. gallery is a tonn times slower. dont know the reason....
boot is fast.....
lets see..
Szaby59 said:
@The Dark Lestat: What's the source? JPF or older?
Click to expand...
Click to collapse
JPA
Sent from my Samsung Galaxy 3 FROYO
So we cant install this rom throw recovery menu, because samsung changed something in froyo update? Am i right? Its posible to flash back into enclair and flash it throw enclair recovery menu?
Meybe this is very newbie question.... i dont understand to these things (but i want to)
Sent from my GT-I5800 using XDA App
How do you create a factoryfs.rfs?
Terminal?
froyo is not released by samsung yet right??? i mean officially then how the hell can samsung change something in **** **** **** so the **** update cannot be done....i dont get this
is froyo out?
Hello,
I'm facing a problem where I'm unable to apply UOT themes on my Gingerbread/Sense rom . I'm currently running InsertCoin CM7/A2SD+ v02, and extracted the framework_res, as well as SystemUI from the ZIP but still I cant get it to work.
No matter what I try nothing changes. Can anyone help me?
What's going wrong exactly?
EDIT: When you've chosen the stuff you want, check the Summary area and make sure there are no red boxes indicating something is incompatible/wrong
chul said:
Hello,
I'm facing a problem where I'm unable to apply UOT themes on my Gingerbread/Sense rom . I'm currently running InsertCoin CM7/A2SD+ v02, and extracted the framework_res, as well as SystemUI from the ZIP but still I cant get it to work.
No matter what I try nothing changes. Can anyone help me?
Click to expand...
Click to collapse
if you cook framework and systemui - it means you changing system theme. So after flashing UOT, select "System" theme in ThemeChooser.
chul said:
I'm facing a problem where I'm unable to apply UOT themes on my Gingerbread/Sense rom . I'm currently running InsertCoin CM7/A2SD+ v02, and extracted the framework_res, as well as SystemUI from the ZIP but still I cant get it to work.
No matter what I try nothing changes. Can anyone help me?
Click to expand...
Click to collapse
unzip your ROM and put
-SystemUI.apk from the app_s folder
-framework-res.apk from the framework_s folder
from the unzipped ROM
load this 2 files in "UOT File upload" up
then cooked your file and download it.
download this file h ttp://dl.dropbox.com/u/18354786/black_circle-bat_flying.zip
then unzip your kitchen file and black_circle-bat_flying.zip.
put your kitchen SystemUI.apk and framework-res.apk.
copy this files in to the follow dirs:
-SystemUI.apk to the black_circle-bat_flying/app_s folder
-framework-res.apk to the black_circle-bat_flying/framework_s folder
then zip it, now you can flash this file in recovery.
the black_circle-bat_flying.zip works with InsertCoin CM7/A2SD+ v03 data++ version.
i have used the installscript from alexdiaz themediazGingerMix7.
i hope its allowed to use this script, if not ok then i delete the zip.
Sorry for my bad english
for gingerbread roms you need 3 files. the other one is com.htc.resources.apk
u need to upload the com.htc.resource file as well to make the theme work,
I am on insertcoin v0.8, everything works great, very smooth
HI I have downloaded the I5800XXJPM.zip firmware but it has only 3 files in it. Now i am confused how to flash it in Odin. I have flashed earlier using both the method like different files and one package but this file is different. I think i need to make a tar file before.
files that is under the zip file is: factoryfs.rfs, modem.bin and zImage.
Please suggest me the right way.
probably you open the tar file, those three files are inside the tar.
brjshshrma said:
HI I have downloaded the I5800XXJPM.zip firmware but it has only 3 files in it. Now i am confused how to flash it in Odin. I have flashed earlier using both the method like different files and one package but this file is different. I think i need to make a tar file before.
files that is under the zip file is: factoryfs.rfs, modem.bin and zImage.
Please suggest me the right way.
Click to expand...
Click to collapse
hey for me there are 6 files. U may have downloaded the wrong one!!...
and its not a .zip its a .tar file after extracting
neo1691 said:
hey for me there are 6 files. U may have downloaded the wrong one!!...
and its not a .zip its a .tar file after extracting
Click to expand...
Click to collapse
not its a zip file which has a size of 125 Mb. Previously I flashed my odin with both ways (one package and also with 4 different files) but both of those files were different. Can u give me a link so that I download the right file. Make sure its XXJPM coz i will then flash to Indroid 4.1, currently i m in XXJPF.
brjshshrma said:
not its a zip file which has a size of 125 Mb. Previously I flashed my odin with both ways (one package and also with 4 different files) but both of those files were different. Can u give me a link so that I download the right file. Make sure its XXJPM coz i will then flash to Indroid 4.1, currently i m in XXJPF.
Click to expand...
Click to collapse
Try this..
Hope it works
Leave it guys, the file was incomplete. I have downloaded a new file and now flashed it successfully. The matter stands closed, thanks for taking interest.
I had given you a link to a new file
seems you overlooked!!
anyways good to see your problem is solved
neo1691 said:
I had given you a link to a new file
seems you overlooked!!
anyways good to see your problem is solved
Click to expand...
Click to collapse
yes, I downloaded a new file before seeing ur link. anyways can u help me with themes and 1% battery mode?
brjshshrma said:
yes, I downloaded a new file before seeing ur link. anyways can u help me with themes and 1% battery mode?
Click to expand...
Click to collapse
1% battery mod is working only with fugumod 2.4 kernals!!
what you want to know about themes../??
Just go to themes section download any theme you like..
read all the instructions..
generally there are two to three files which you have to replace with old files in system/framework folder.
some have themed apks also.
you have to replace them with old apks in system/app
that should be helpful!!
PS A thanks buttob do exist there if u dont know !!
The missing files were logo.png and cache.rfs.
I think that missing logo.png is not big deal, but I don't know what cahe.rfs is supposed to do.
LarryMetal said:
Forget it... False reading...
The missing files were logo.png and cache.rfs.
I think that missing logo.png is not big deal, but I don't know what cahe.rfs is supposed to do.
Click to expand...
Click to collapse
false reading means???
Good!! i was confused earlier! Thanks for editing
neo1691 said:
false reading means???
Click to expand...
Click to collapse
My bad! I had edited my initial post(because I didn't understand right), and then I just added my opinion. With my t"h"urd edit is no more confusing!
LarryMetal said:
My bad! I had edited my initial post(because I didn't understand right), and then I just added my opinion. With my t"h"urd edit is no more confusing!
Click to expand...
Click to collapse
its just fine..!!
happens with everyone!
Is that phone totally abandoned by htc ? i just baught it 2 days ago
if saw i would replace it with other phone
can any one just answer it simply
thats what i gues : no software , kernel source downloads available for this device . i even tried to contact htc about lp update and the Simply don't know
I think the lollipop firmware is here
http://ir-file.com/portal/index.php?dir=Firmware/HTC/HTC_Android/A50ML_DTUL/
We shouldn't expect any lollipop firmware unless maybe we flash it.
My phone had lollipop out of the box but I flashed kitkat so that I could root it and modify it, but I found it to be too boring, I'm looking to revert to lollipop
You try and tell me if it worked
Mohamed Yaser said:
You try and tell me if it worked
Click to expand...
Click to collapse
Ok
So I downloaded the zip file sized about 1.8gb.
On extracting the zip file, I only get three files:
Android - info. txt - 92B
Userdata.img - 136034KB
Cache.img - 6972KB
I don't know where the other files have disappeared to
Gibz97 said:
So I downloaded the zip file sized about 1.8gb.
On extracting the zip file, I only get three files:
Android - info. txt - 92B
Userdata.img - 136034KB
Cache.img - 6972KB
I don't know where the other files have disappeared to
Click to expand...
Click to collapse
i want to download it but i cant ,, give me a direct link for it or the account used
ah,, can you delete the extracted folder or its stuck on your hard disk ??
Mohamed Yaser said:
i want to download it but i cant ,, give me a direct link for it or the account used
ah,, can you delete the extracted folder or its stuck on your hard disk ??
Click to expand...
Click to collapse
Yes I can delete them. I tried contacting them, they said it's an encrypted zip file couldn't be extracted. Don't know how it's going to be flashed
Here
Extracted
can you provide me the download link directly , i don't have to make an account ,,,,, whatever it is i will start porting sense 7 form desire820 lolipop , i will see if i can
but i need to make sure that htc has forgot about us
Deleted
So when I repaired the zip file with winrar, I was able to recover these files.
Scatter file shows HTC_A50ML which is the D820ys, it comes with Lollipop out of the box.
This zip file is encrypted, only if one could find a password to crack it, or if someone has the knowhow to extract this kind of files
d820ts
is this update available for d820ts???