Related
Hi Guys!
I am trying to root my nexus, unlocked it, installed the right usb drivers, I can see the phone and everything looks right.
Downloaded Superboot for ERE27 with himem enabled and ran this. no problem.
I put the img file on the SD card and when I boot the phone in Fastboot / Recovery it does not find and img files on the SD card.
I tried 2 different cards and also different img files.
When I do this I get first the message no images found than I see the droid with a triangle and a ! in it. - Have to pull the battery.
Ideas anyone?
Thanks
What are you trying to do?
1) you had to unlock the bootloader which enables you to install a new recovery image (which is needed to allow you to install new roms)
2) you had to apply the recovery image Amon RA via a command prompt and a batch file if you use Windows. The phone's USB connection needs to be in development mode and once the batch file executes and successfully finishes you need to reboot the phone.
3) you restart the phone into bootloader mode, use the volume rocker to select the recovery console. If you end up with an andriod and exclamation symbol the Amon RA recovery file was not installed.
4) the new recovery console allows you to clean the SD card. Install roms from the SD card and some other commands. The Roms for the Andriod are in ZIP format and do not need to be unziped. In other words all you need to copy to the SD card is the full ZIP file (approx 75MB) and install that directly from the recovery console.
If your android stays in the booting sequence which is shown as the X with flying little pixels, it's most likely because you did not wipe the device clean first. That item is in the recovery console as well.
Hope this helps. I am just as new to this as you are.
You didn't unzip them did you?
You're trying to root with superboot. Great, but the recovery is not capable of flashing .img files, only .zip updates and roms and such. .img files have to be flashed using fastboot, not recovery, and are flashed from the connected computer.
If you read the superboot instructions from wherever you got the file, you'll see that you have to put the .img in the same directory ON YOUR COMPUTER as fastboot, connect via USB, boot the phone into fastboot, then enter the appropriate command line on the computer to flash the file.
If you've done that, then you are officially DONE with the rooting process.
Also, make damn sure that the superboot version matches the software version on your phone. They're both ERE27, right?
I'm not sure what anosis's post is talking about, but that looks more like the process for installing a custom rom (ie cyanogenmod), than rooting.
To root your phone, you DO NOT need Amon-RA's recovery. You only need that if you want to install custom roms, etc. It wont hurt to have it, as it includes many more functions than the stock recovery, but just to root, you don't need it.
Summary:
If you flashed the superboot.img from your computer via fastboot, your phone is rooted. Done.
You don't need to do anything in the recovery at all for rooting. Only for installing update.zips and custom rom.zips.
Hey, So I have been scouring the forums trying to find some answers about this and you seem to be the closet to my situation. Here is what I did:
So I was running a CM9 Aplha, reverted back to stock 2.3.6 [1ada25375426.signed-soju-ota-189904.1ada2537]) so that I could then apply ICS update [VQ8PQk_V]) which I sucessfully did. This was about a month ago and it was all going well.
Then yesterday I wanted to upgrade to 4.0.4 [hR7QFEtn] so I did and superuser wasn't working properly but then I reinstalled it and got it to work. However I got to the point where everything was working fine EXCEPT for the Google Play store kept on force closing. I spent hours trying last night and could not find a solution.
I tried restoring the previous ICS update that I had and it worked, and then I tried updating again. Also side: My clockwork was on the fritz lately so I was using Zedowmaxs force into clockwork recovery image [fastboot boot recovery3101.img] to force it in sometimes.
Anyway bottom line here is where my REAL ISSUE begins. I decided just to wipe everything and start anew. I factory reset/ wiped properly [cache partition and davliche cache] and then locked my bootloader again. Then tried rebooting. Got stuck on Google screen. Then I unlocked my bootloader again. Tried again, same issue.
So, here is where I am at. Cannot get into recovery from fastboot, takes me back to fastboot. AND, everything is wiped because I locked/unlocked my bootloader. All I can do is adb commands.
I don't know what to do from here and there is a lot of things going on. If you could help that would be great!? What I am going to try next is to flash some recovery on, but I don't know which one/ try to mount a file to my sd card from adb commands.
Daboxk said:
Hey, So I have been scouring the forums trying to find some answers about this and you seem to be the closet to my situation. Here is what I did:
So I was running a CM9 Aplha, reverted back to stock 2.3.6 [1ada25375426.signed-soju-ota-189904.1ada2537]) so that I could then apply ICS update [VQ8PQk_V]) which I sucessfully did. This was about a month ago and it was all going well.
Then yesterday I wanted to upgrade to 4.0.4 [hR7QFEtn] so I did and superuser wasn't working properly but then I reinstalled it and got it to work. However I got to the point where everything was working fine EXCEPT for the Google Play store kept on force closing. I spent hours trying last night and could not find a solution.
I tried restoring the previous ICS update that I had and it worked, and then I tried updating again. Also side: My clockwork was on the fritz lately so I was using Zedowmaxs force into clockwork recovery image [fastboot boot recovery3101.img] to force it in sometimes.
Anyway bottom line here is where my REAL ISSUE begins. I decided just to wipe everything and start anew. I factory reset/ wiped properly [cache partition and davliche cache] and then locked my bootloader again. Then tried rebooting. Got stuck on Google screen. Then I unlocked my bootloader again. Tried again, same issue.
So, here is where I am at. Cannot get into recovery from fastboot, takes me back to fastboot. AND, everything is wiped because I locked/unlocked my bootloader. All I can do is adb commands.
I don't know what to do from here and there is a lot of things going on. If you could help that would be great!? What I am going to try next is to flash some recovery on, but I don't know which one/ try to mount a file to my sd card from adb commands.
Click to expand...
Click to collapse
It looks like the time when you were locking-unlocking the bootloader, you messed up the recovery. Since your phone can get into bootloader menu, I think you can get out of this issue.
Here is what I would do.
1. Unlock the bootloader.
2. flash clockworkmod recovery using fastboot USB.
3. Download recovery-RA-passion-v2.2.1.img, put it in C:\fastboot\
4. Shut down your phone. Then start your Nexus One in Fastboot mode by holding down the Trackball and press the Power button.
5. Connect your phone to your computer. Open a Command Prompt (Start -> All Programs -> Accessories -> Command Prompt), and run the following commands:
cd C:\fastboot
fastboot devices
fastboot flash recovery recovery-RA-passion-v2.2.1.img
now see if you can get into recovery. If you can, just flash a custom rom using install zip from sd card option in the recovery
I didn't read all the replies but fastboot reads from your PC's disk not the sdcard, unless you are running it through shell or something?
So at one point, I accidentally deleted the OS off of my phone, but I still had TWRP installed. The only solution was to flash a rom through ADB, but TWRP didn't have ADB for whatever reason for me, so I flashed CWM which did have ADB. I was able to flash CWM after I pushed a rom through ADB and install Android 4.3 w/ root from nexus4root.com. It worked correctly, but I noticed that I only had 5.66gb of storage on my phone. I have the 16gb variant which would have about 12gb usable. So I followed a guide here in xda to get back my 16gb. I was told to wipe my phone step by step and flash a factory image. But ere are my errors not
- When I try to flash the factory image, it says 'missing boot.sig, system.sig, and something else.sig'
- I have no recovery on my phone
- When I try using fastboot commands, it says FAILED (command write failed (unknown error))
I am pretty stuck here. And I did redownload the root files.
EDIT: I was able to fix fastboot and flashed TWRP, but my devices is encrypted and requires a password
You should be able to clean your encrypted user storage by using "fastboot erase userdata", and you can do it for /data /system and /cache partition as well.
Or go into TWRP, if it ask for password, just press cancel. Then go to Wipe -> Advance -> Select "Format Data" and it will do a full wipe and cleaning out the encrypted partition.
As for using fastboot to restore to stock, shouldn't be any problem as long as you have the correct drivers and latest ADT package from Google.
I did something similar and had encryption on. My fix was "fastboot flash" the stock system, boot and recovery (4.3 for me). After getting back in my phone and verifying everything was there I re-flash CWM and re-rooted.
Hello guys,
I had my phone rooted with latest twrp. I flashed stock+ rom with Franco Kernel 25r and the A.R.I.S.E file for better sound. I've done the same set up minus the ARISE file and never had an issue.
well to my luck it kept bootlooping and I wasn't able to get back into my custom recovery. When I got home and got my hands on a pc I did a factory reset by manually flashing stock google img . I even used a couple tools since I ran out of ideas and still no luck.
I'm able to do anything through fastboot but I can't seem to get into my recovery at all.
Any ideas or tips of where I should go next?
Not a Hardbrick
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..
At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.
leninmon said:
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..
Click to expand...
Click to collapse
First of all thank you for the response.
I've tried flashing the most current twrp and it seems to go through fine on fast boot but when I actually try to get into recovery from the device it will boot loop and just keep doing that.
How can I get into the phones storage through fastboot?
Where can I get the factory zip?
it feels as if everything seems to go good through fastboot but when I actually try to boot the phone nothing seems to work.
Wiltron said:
At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.
Click to expand...
Click to collapse
Thanks for the reply.
I've done the manual flashing already and flashed everything single item the most current factory image. Everything seemed to have gone through okay but when I rebooted the phone it was back to 0.
I'm actually considering getting rid of the phone now since it is my daily =/
Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.
Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..
leninmon said:
Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..
Click to expand...
Click to collapse
I flashed the twrp.img and it went through successfully at least on the computer it did but when the phone actually tries to get into recovery (twrp) it will start to boot loop and keep on doing that. I tried both an encrypted and decrypted boot img but it still made no difference.
I'm really going crazy over this
Wiltron said:
Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.
Click to expand...
Click to collapse
I just tried this and had no luck =/....the phone wont get past the google boot screen
You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.
leninmon said:
You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.
Click to expand...
Click to collapse
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through
edgarted said:
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through
Click to expand...
Click to collapse
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.
Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM
i42o said:
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.
Click to expand...
Click to collapse
I was really really hoping this would help. I erase/formated everything before flashing anything. I then ran the flash-all file and it took a couple of minutes and it said finished on the command box and my phone restarted and went into the white google logo and rebooted again with a bootloop. I waited around 15 minutes hoping it would start but it didn't.
It honestly feels as if the phone is not processing the full commands but on the pc it seems to go through successfully
is there a way to force an install of a rom and see if maybe a dirty flash over the stock one will allow it to start up?
leninmon said:
Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM
Click to expand...
Click to collapse
i know how to flash the radio and bootloader but how do i do a fastboot update?
edgarted said:
i know how to flash the radio and bootloader but how do i do a fastboot update?
Click to expand...
Click to collapse
Just unzip the factory image and there U can see the flash shell script files too. Open them in a text editor & U could see the exact command. In a factory img, they also do the same thing via script files. Flashing the radio & bootloader & updating the rest archive
so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/
edgarted said:
so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/
Click to expand...
Click to collapse
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.
blitzkriegger said:
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.
Click to expand...
Click to collapse
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
edgarted said:
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
This is weird. What version of the stock factory images did you flash? I've been using leviticus 1.3 since it came out and when i was still on stock rom. I switched over to cm builds and have been flashing every nightly since the 7/24th build, and in the process repeatesly reflashing the aound mod along, and i've had zero issues with the phone booting afterwards.
This is the whole situation:
I have Pure Nexus installed on my 6P, running great for months. Suddenly yesterday it rebooted while I was using it and sticking in a bootloop. "No problem", I thought, and wanted to reboot into recovery - but nope, can't access it anymore. So I tried to reflash the recovery when I got home, but I only get errorors
When using the command adb devices the line just stays blank. The same with fastboot commands, besides "Fastboot devices"
After messing around a couple hours with the drivers and so on, I managed to somehow get the fastboot command working again. But no sign for the ADB commands, probably because I didn't turn on USB-debugging.
I am now at the point, where I have reflashed Stock Android with the Nexus Root Toolkit and managed to get back into stock android recovery, but still can't get TWRP to boot. I didn't want to delete my personal data, but I saw no other way and formatted /data in stock recovery. But the problem with the bootloop is still there.
It's not the classic bootloop, it boots as far as the Google Logo, then shuts itself down and begins again. I have now reached the point where I have to say, that the hardware might be damaged too. I'd love to somehow get access to the internal storage at least, but I can't without a working ADB.
Reinstalled TWRP with every available version, none of them worked. I am able to access stock Android recovery, but adb commands aren't working from here anyway.
Is there an option to fix the recovery mode? If I could get this working, the rest would be easy for me.
Edit: The reboot looks like in this Link. Only difference is, my device doesn't even the reach the dots.
StarShoot97 said:
This is the whole situation:
I have Pure Nexus installed on my 6P, running great for months. Suddenly yesterday it rebooted while I was using it and sticking in a bootloop. "No problem", I thought, and wanted to reboot into recovery - but nope, can't access it anymore. So I tried to reflash the recovery when I got home, but I only get errorors
When using the command adb devices the line just stays blank. The same with fastboot commands, besides "Fastboot devices"
After messing around a couple hours with the drivers and so on, I managed to somehow get the fastboot command working again. But no sign for the ADB commands, probably because I didn't turn on USB-debugging.
I am now at the point, where I have reflashed Stock Android with the Nexus Root Toolkit and managed to get back into stock android recovery, but still can't get TWRP to boot. I didn't want to delete my personal data, but I saw no other way and formatted /data in stock recovery. But the problem with the bootloop is still there.
It's not the classic bootloop, it boots as far as the Google Logo, then shuts itself down and begins again. I have now reached the point where I have to say, that the hardware might be damaged too. I'd love to somehow get access to the internal storage at least, but I can't without a working ADB.
Reinstalled TWRP with every available version, none of them worked. I am able to access stock Android recovery, but adb commands aren't working from here anyway.
Is there an option to fix the recovery mode? If I could get this working, the rest would be easy for me.
Edit: The reboot looks like in this Link. Only difference is, my device doesn't even the reach the dots.
Click to expand...
Click to collapse
If you can get fastboot commands to work, just flash the factory image per Heisenberg's guide. Toolkits are more trouble than help. Return it to fresh stock with a full wipe and start fresh.
Sent from my Nexus 6P using Tapatalk
StarShoot97 said:
Edit: The reboot looks like in this Link. Only difference is, my device doesn't even the reach the dots.
Click to expand...
Click to collapse
That vid you linked is an N5 with a stuck power button. It'll do the same thing and reboot recovery as well. It could be your issue but if it is it'll be the first stuck power button I've heard of on a 6P.
When you access fastboot does it stay on in fastboot or does it reboot from it?
theesotericone said:
That vid you linked is an N5 with a stuck power button. It'll do the same thing and reboot recovery as well. It could be your issue but if it is it'll be the first stuck power button I've heard of on a 6P.
When you access fastboot does it stay on in fastboot or does it reboot from it?
Click to expand...
Click to collapse
I said it looks like this, I did not say the button is the reason
When I access fastboot it stays there until I manually select an option
ultyrunner said:
If you can get fastboot commands to work, just flash the factory image per Heisenberg's guide. Toolkits are more trouble than help. Return it to fresh stock with a full wipe and start fresh.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
This is my last viable option, as I'd like to somehow pull my stuff from the phone. Afterwards I'd clean install it anyway.
StarShoot97 said:
This is my last viable option, as I'd like to somehow pull my stuff from the phone. Afterwards I'd clean install it anyway.
Click to expand...
Click to collapse
You contradict yourself a bit so it is difficult to help you. You got to stock recovery but you can't boot into TWRP? If you have stock recovery, of course you can't boot into TWRP. You have wiped your data but you still want to preserve your data ... Huh?
Your phone isn't working so just nuke and pave with the command line and avoid toolkits. They are sometimes part of the problem.
Sent from my Nexus 6P using Tapatalk
ultyrunner said:
You contradict yourself a bit so it is difficult to help you. You got to stock recovery but you can't boot into TWRP? If you have stock recovery, of course you can't boot into TWRP. You have wiped your data but you still want to preserve your data ... Huh?
Your phone isn't working so just nuke and pave with the command line and avoid toolkits. They are sometimes part of the problem.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
When stock recovery is installed, I am from time to time able to access it (most of the times it just ends in a bootloop)
If I flash TWRP I can't access it, no matter how often I try
I have factory reset my phone, the stuff on the internal is still there and I want to reach this, as I have my chats, SMS, university stuff and so on backed up on the internal storage
I am trying everything - all the regular adb methods, toolkits, every driver, nothing is working
Sorry if you don't understand my situation, but I am in a pinch right now
You said you have fastboot working?
Download the factory image zip file. Extract it. Extract the zip file from inside that as well. Move the img files to your platform-tools folder.
Reboot your phone to the bootloader. Hold volume down+power from a powered off state.
Plug into PC, open command line from your platform-tools folder.
Type, fastboot devices
Does it show your serial number? If so, start flashing the following images;
Bootloader-angler-angler-xx.xx.img, radio-angler-angler-xx.xx.img, vendor.img, system.img, boot.img, recovery.img
Flash with fastboot.
Code:
fastboot flash bootloader bootloader-angler-angler-xx.xx.img
Code:
fastboot flash radio radio-angler-angler-xx.xx.img
(Substitute "xx.xx" for the version number shown in the img files you unpacked)
Reboot bootloader
Code:
fastboot flash vendor vendor.img
Code:
fastboot flash system system.img
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Once you do that, boot to stock recovery and cache wipe. Reboot and you're stock. If you're still not able to boot after that post back.
Edit: You said you wanted to avoid flashing factory images to keep internal storage in tact. Do it this way and you can have your cake and eat it too.
Edit2: wrong, see my latest reply
RoyJ said:
You said you have fastboot working?
Download the factory image zip file. Extract it. Extract the zip file from inside that as well. Move the img files to your platform-tools folder.
Reboot your phone to the bootloader. Hold volume down+power from a powered off state.
Plug into PC, open command line from your platform-tools folder.
Type, fastboot devices
Does it show your serial number? If so, start flashing the following images;
Bootloader-angler-angler-xx.xx.img, radio-angler-angler-xx.xx.img, vendor.img, system.img, boot.img, recovery.img
Flash with fastboot.
Code:
fastboot flash bootloader bootloader-angler-angler-xx.xx.img
Code:
fastboot flash radio radio-angler-angler-xx.xx.img
(Substitute "xx.xx" for the version number shown in the img files you unpacked)
Reboot bootloader
Code:
fastboot flash vendor vendor.img
Code:
fastboot flash system system.img
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Once you do that, boot to stock recovery. Perform a factory reset again like you already mentioned you did as well as a cache wipe. Reboot and you're stock. If you're still not able to boot after that post back.
Edit: You said you wanted to avoid flashing factory images to keep internal storage in tact. Do it this way and you can have your cake and eat it too.
Click to expand...
Click to collapse
I did this already exactly like you wrote, did it again now, and I am still stuck in the reboot loop (boots up to Google Logo, then shuts itself down; repeat)
Can't reach recovery mode either
You said you had access to stock recovery before?
You already did this?
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
If you flashed the factory images and still boot looping you may need to RMA.
Did you restore a TWRP backup?
Edit: Sorry, it's late and I have no sleep. I was wrong. I was thinking TWRP. Factory Reset from TWRP before my steps will keep internal storage I'm tact. Factory Reset from stock recovery will wipe internal storage. Everything. You mentioned you did that already from stock recovery before i made my reply. Your data is already gone as soon as you did that. If not, your emmc is likely corrupted and you need to RMA.
Fastboot twrp 3.0.0-0 then try to access it
RoyJ said:
You said you had access to stock recovery before?
You already did this?
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
If you flashed the factory images and still boot looping you may need to RMA.
Did you restore a TWRP backup?
Edit: Sorry, it's late and I have no sleep. I was wrong. I was thinking TWRP. Factory Reset from TWRP before my steps will keep internal storage I'm tact. Factory Reset from stock recovery will wipe internal storage. Everything. You mentioned you did that already from stock recovery before i made my reply. Your data is already gone as soon as you did that. If not, your emmc is likely corrupted and you need to RMA.
Click to expand...
Click to collapse
Yes, I think so too. I flashed the phone with the full Stock image, the bootloop is still there.
Looks like my precious is dead
At least I have my most important data like phonenumbers, pictures and SMS saved to the cloud
Gonna RMA it tomorrow
Goodybe my precious, I hope you'll be fine :crying:
Got my device back today, the mainboard was damaged, so I had no chance to get my data from the phone
Hey, at least my warranty has been renewed 'till 2018
StarShoot97 said:
This is the whole situation:
I have Pure Nexus installed on my 6P, running great for months. Suddenly yesterday it rebooted while I was using it and sticking in a bootloop. "No problem", I thought, and wanted to reboot into recovery - but nope, can't access it anymore. So I tried to reflash the recovery when I got home, but I only get errorors
When using the command adb devices the line just stays blank. The same with fastboot commands, besides "Fastboot devices"
After messing around a couple hours with the drivers and so on, I managed to somehow get the fastboot command working again. But no sign for the ADB commands, probably because I didn't turn on USB-debugging.
I am now at the point, where I have reflashed Stock Android with the Nexus Root Toolkit and managed to get back into stock android recovery, but still can't get TWRP to boot. I didn't want to delete my personal data, but I saw no other way and formatted /data in stock recovery. But the problem with the bootloop is still there.
It's not the classic bootloop, it boots as far as the Google Logo, then shuts itself down and begins again. I have now reached the point where I have to say, that the hardware might be damaged too. I'd love to somehow get access to the internal storage at least, but I can't without a working ADB.
Reinstalled TWRP with every available version, none of them worked. I am able to access stock Android recovery, but adb commands aren't working from here anyway.
Is there an option to fix the recovery mode? If I could get this working, the rest would be easy for me.
Edit: The reboot looks like in this Link. Only difference is, my device doesn't even the reach the dots.
Click to expand...
Click to collapse
Try flashing TWRP 3.0.2-3 or boot into twrp through fastboot. Using
fastboot boot recovery <twrp filename>.img
I think booting to twrp using this command will work.
And here's the link to Twrp 3.0.2-3 , as its not available on Official Twrp page.
https://idlekernel.com/twrp/nexus/twrp-3.0.2-3-angler.img
I had the same problem with my 5X, nothing worked I tried every possible solution described above and more. Nothing. I figured out that there was nothing to loose and followed directions from YouTube videos (links below) and it worked. Used heat gun at max temp for about 2 mins from each side. It's been about 12 hours since then, phone works flawlessly. Here are the links:
https://www.youtube.com/watch?v=SD25mdrgAys
https://www.youtube.com/watch?v=Cqh2x-TGnCY
Be careful handling the motherboard after you heat the first side, let it cool first before you start working on the second side. The same with the second side do not pick it up until it's cool.
5X, Pure Nexus Rom 7.1.2 June 5th security update, Elemental X Kernel,
has anyone found solution to this?????
OK, 3 days ago I rebooted my ZE551KL and it went into a bootloop. I was completely 100% stock. No root. Locked bootloader. Spent the better part of the weekend trying to troubleshoot it, and I have made almost zero progress.
I've tried a bunch of things, but here is my current status.
Can get into fastboot mode no problem.
POWER + DOWN VOL gets me into stock recovery, but at some point I flashed an older version. I tried flashing TWRP, but after install could never seem to get into it (is that because I'm unrooted and locked?)
Current recovery version: Android system recovery <3e> LRX22G.WW_user_1.16.40.763_20151201
I've tried flashing to a couple different firmware versions from the ASUS website both via ADB and via the SD Card.
Current firmware: UL-z00T-WW-1.17.40.1531-user.zip
Still in bootloop.
Any advice on rebuilding this thing from scratch? I dont care whether I just get stock back, or if I need to root/unlock, install TWRP and a custom ROM. Dont care, just want a functioing phone!
Thanks in advance.
ACFH said:
I dont get it. Did you factory reset your phone? With stock rom, factory work most of the time.
You said that you tried flashing TWRP. If you see successfull message after flash, type "fastboot reboot" and hold volume down button right after hit Enter. If you did right, you can get into twrp, then choses Wipe > format, it more powerfull than factory reset.
Click to expand...
Click to collapse
1. Factory reset from within the phone's OS? No, I cant get that far. Just constant bootloop on ASUS logo.
2. I've used the fastboot erase command to wipe everything, and used the wipe data/factory reset option in the stock recovery. Still bootloop.
3. I've tried flashing TWRP 3.0.0.0 and the newest version of TWRP. I hold down the VOL DOWN key before hitting enter on "fastboot reboot"; it just goes into a faster bootloop, like every half-second. When I release the VOL DOWN key, it goes into the same, slower original bootloop.
ACFH said:
Ok. You can format through fastboot
Code:
fastboot format userdata
fastboot format cache
If it still stuck in bootloop, try reflash boot and recovery, fastboot wipe system. Then copy update.zip to sdcard. Boot into recovery > install update from external sd.
Click to expand...
Click to collapse
Awesome. I'll give that a try and report the results.
I just downloaded the .img with the same date as my recovery version from here. https://asus.kremowka.xyz/categories/show/2
Its been hung at "Verifying update package...." for about 10 mins now. Once this is finished (and probably fails ); I'll give your format commands a try.
ACFH said:
Ok. You can format through fastboot
Code:
fastboot format userdata
fastboot format cache
If it still stuck in bootloop, try reflash boot and recovery, fastboot wipe system. Then copy update.zip to sdcard. Boot into recovery > install update from external sd.
Click to expand...
Click to collapse
Ugh. Didn't work. Here is what I did:
fastboot format userdata
fastboot format cache
fastboot erase system
fastboot format system
Reboot to recovery
install UL-z00T-WW-1.17.40.1531-user.zip from SD card.''
Installation successful.
Reboot.
In a bootloop that shows ASUS logo for 10-15 seconds, flashes a blue screen really quick, then reboots.
What can I try next?