[GUIDE]How to setup 240 dpi on your rom - Galaxy Note II General

Hey everyone
This is my first guide so please be polite
In this guide I will show you how to setup 240dpi or possibly an dpi on your rom.
Links to all the requisites will be given below.
But what is dpi ?
It is the value that manages most ui of the system. a lower dpi means everything would be smaller hence more things could be fitted in the giant screen we have. a higher means everything would be larger hence less could be fitted into the screen
Before We Begin I Want To Clarify The Following-
1)First and foremost I am not responsible for any damage you cause.
2)I assume you have already rooted your phone and have some experience with rooting.
3)You have made backup to be sure that in case you mess up you you can return to what it was like before.
4)Read the whole post before actually starting.
5)Please Hit Thanks Button If I Helped You
So let's Begin-
1)Download and setup xposed framework (Very good instructions on how to do it in the thread) (You need to reboot).
2)Download these modules - xposed app settings , gappscrashfix , all apps in play store.
3)Enable all the 3 modules (You need to Reboot).
4)Now open xposed app settings and set open each app listed below and in dpi enter 320 but don't change anything else.
-calculator
-camera
-clock
-contacts
-dialer storage
-fm radio
-messaging
-task manager
-touchwiz home
-weather widget main
Now some of these could be skipped or some could be added(can be tested but imao that will make the ui ugly but still it's completely your choice).
Also modded versions of some of these apps has been provided by bala_gamer.
5)Before we begin copy the modded samsung keyboard from the link given or setup some other keyboard and make it default.
6)Now open /system/build.prop or use a build.prop editor if you are very conscious and change the following line "ro.sf.lcd_density=320" to "ro.sf.lcd_density=240"
7)Now before we reboot we need to include apply one fix , so instead of rebooting , power off your phone
8)Then go into recovery and flash the modded samsung keyboard.
9)Reboot and enjoy 240dpi.
Note -
1)The stock keyboard will constantly force close on 240 dpi (if you use xposed settings to set it to 320dpi, you will be practically unable to use it), so bala_gamer(thank him) has customized it to work properly on 240 dpi.
2)Recovery must be custom (ofcourse ).
3)Be sure to flash the correct version of modded apps (i.e. 4.1.1 if you have it or 4.1.2 if you have that)
4)I don't know if gappscrashfix and allappsinplaystore are actually required but nothing bad in using it.
5)I know the explanation of dpi is incorrect but that's all you need to know.
6)Installing xposed framework doesn't affect simplistic framework at all.
7)The gappscrashfix and allappsinplaystore you download would be in .zip format. Just rename them to .apk and you can install it then.
8)Many apps especially the system ones or samsung ones aren't ment to scale well. They are just meant to look good at 320dpi so they will look way ugly at 240dpi. To fix this xposed settings is used. You need to set it for each app that you think is ugly.
9)You can use mobile odin to flash the zip. Just use ota tab.
Finally the links-
1)xposed framework - http://forum.xda-developers.com/showthread.php?t=1574401 (Link to modules page in his thread).
2)modded apps - http://forum.xda-developers.com/showthread.php?t=2001577
And not to forget credits
-rovo89 for framework
-bala_gamer for modded apps
-numerous other people who helped me in some way or the other (please pm me if I forgot anyone).

Great Job & Guide my friend.
Thanks

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7100 using xda app-developers app

Will try it later and report. Thanks!
Sent from my N7100, a.k.a. THE BEAST

Big thanks my friend
If i flash xplosed framework,i loose SF ??

micky387 said:
Big thanks my friend
If i flash xplosed framework,i loose SF ??
Click to expand...
Click to collapse
No.
Sent from my GT-N7100 using xda app-developers app

UtkarshGupta said:
So let's Begin-
1)Download and setup xposed framework (Very good instructions on how to do it in the thread) (You need to reboot).
2)Download these modules - xposed app settings , gappscrashfix , all apps in play store.
3)Enable all the 3 modules (You need to Reboot).
4)Now open xposed app settings and set open each app listed below and in dpi enter 320 but don't change anything else.
-calculator
-camera
-clock
-contacts
-dialer storage
-fm radio
-messaging
-task manager
-touchwiz home
-weather widget main
Now some of these could be skipped or some could be added(can be tested but imao that will make the ui ugly but still it's completely your choice).
Also modded versions of some of these apps has been provided by bala_gamer.
5)Before we begin copy the modded samsung keyboard from the link given or setup some other keyboard and make it default.
6)Now open /system/build.prop or use a build.prop editor if you are very conscious and change the following line "ro.sf.lcd_density=320" to "ro.sf.lcd_density=240"
7)Now before we reboot we need to include apply one fix , so instead of rebooting , power off your phone
8)Then go into recovery and flash the modded samsung keyboard.
9)Reboot and enjoy 240dpi.
Click to expand...
Click to collapse
At which point should we flash the modded apps?
And also, I assume that if I use only Swiftkey I can skip the modded samsung keyboard flashing step, right?.

cabessius said:
At which point should we flash the modded apps?
And also, I assume that if I use only Swiftkey I can skip the modded samsung keyboard flashing step, right?
Click to expand...
Click to collapse
Flash it after you set 240 dpi
Yeah correct if you just wanna use SwiftKey then you don't need to flash it.
Mind it that you will get continuous fc pop ups of Samsung keyboard if you remove SwiftKey.
Sent from my GT-N7100 using xda app-developers app

does any1 know how can I change the dpi of the lancher on aopk based devices?
i'm using jellybam, and i changed the dpi of some apps to 240, but i can't figure out how to change the lancher, or keyboard and such..
can i flash safly the 240 dpi mods? or it might make a problem?

galshahaf said:
does any1 know how can I change the dpi of the lancher on aopk based devices?
i'm using jellybam, and i changed the dpi of some apps to 240, but i can't figure out how to change the lancher, or keyboard and such..
can i flash safly the 240 dpi mods? or it might make a problem?
Click to expand...
Click to collapse
Wrong thread but I am gonna help you.
You can change the dpi of other apps normally in pa settings.
These modded apps will probably not work with jellybam but you can try if you want to.
Sent from my GT-N7100 using xda app-developers app

Success!!!

UtkarshGupta said:
Wrong thread but I am gonna help you.
You can change the dpi of other apps normally in pa settings.
These modded apps will probably not work with jellybam but you can try if you want to.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
ya, I did is, but it's not working as well as bada_gamer mods:\
thnx anyway!

@ UtkarshGupta,
Great job and I am glad you decided to do it for you and others.

lpsi2000 said:
@ UtkarshGupta,
Great job and I am glad you decided to do it for you and others.
Click to expand...
Click to collapse
Thanks but hitting it would mean more
Sent from my GT-N7100 using xda app-developers app

thnks man :good:

phonix34 said:
thnks man :good:
Click to expand...
Click to collapse
Hit thanks If you mean it.
Sent from my GT-N7100 using xda app-developers app

For those wondering what to so with the gappscrashfix.zip and allappsplaystore.zip from the villainrom site, just rename the file to apk and install. The message to enable it in the xposed will come, enable it and then reboot. Think the op should give a mention in the 1st post.
Sent from my GT-N7100 using xda premium

lrcquest said:
For those wondering what to so with the gappscrashfix.zip and allappsplaystore.zip from the villainrom site, just rename the file to apk and install. The message to enable it in the xposed will come, enable it and then reboot. Think the op should give a mention in the 1st post.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yeah forgot that thanks
Sent from my GT-N7100

This is all great but it would be even better if there was a mod for 4.1.2 roms to place the status bar at the bottom with the soft navigation keys like in a tablet ui. I found one but it seems to only work for 4.1.1.
Sent from the rabbit hole.

bushako said:
This is all great but it would be even better if there was a mod for 4.1.2 roms to place the status bar at the bottom with the soft navigation keys like in a tablet ui. I found one but it seems to only work for 4.1.1.
Sent from the rabbit hole.
Click to expand...
Click to collapse
You can. Use a custom keyboard and 170 dpi.
Sent from my GT-N7100

Related

[MODS][CM9]Optimus 4X LockScreen, Recent Apps, Softkeys & Battery on Status Bar, etc.

[MODS][CM9]Optimus 4X LockScreen, Recent Apps, Softkeys & Battery on Status Bar, etc.
Ok, so here is the deal, I have been looking for stuff to mod the last Hehappy ROM (Lastkiss) and found all of these things working for our phone (They SHOULD work on Neko's IcySnap ROM as well), everyone of them has been tested by me on the LG Optimus One P500:
NOTE ABOUT THIS ONE (LG Optimus 4x Lock Screen) :
It does unlock the screen but you have to tap in the center of the screen and SLOWLY (as in very careful and slowly) drag your finger all the way to your upper right corner. (not really worth it)
[MOD] [CM9] LG Optimus 4x Lock Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Working on CM9 only!
Without transparent!
Installation:
Flash *.zip from recovery
Wipe dalvik
Reboot
Tested and working on:
Quote:
Sony Xperia P
Sony Xperia U
Sony Xperia Go (Need testing)
Sony Xperia Sola (Need testing)
__________________________________________________________________________________________________________
[MOD][CM9] Soft Keys and Battery Line
there is no option to enable / disable buttons or the battery line, they are on by default and can not be configured
make sure you back up your SystemUI so you can go back to the original if you don't like this one
Click to expand...
Click to collapse
Soft Keys ONLY
__________________________________________________________________________________________________________
[mod][cm9 ivendor rc5][update] jelly bean status bar
because I have problems with the Jelly Bean status bars, I've created my own.
this only works with CM9 Ivendor rc 5 other roms have not been tested.
this is my first mod and not stone me if something does not work
Installation:
- Make a Backup of your rom
- Flash this zip with cwm
- go to advanced/ fix permisions
- Reboot and have fun
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
Note about this one:
It also changes the DPI of the NAVIGATION BAR, you can see it on the screenshoot I took on my phone.
WINDOWS TASK SWITCHER MOD FOR CM-9 ICS
Hey guys..
As the name of the thread reads, I have modded the recent's task switcher in ICS/CM9 to be a look-alike of Windows UI
FEATURES
1. Swipe to kill by flinging your finger up
2. Swipe to kill by flinging you finger down
3. Horizontal task switching
4. And of-course a cool new interface
CREDITS
EvilSto
Jellaxy Team
Yackovsy
XDA
Samsung
Google
and ME
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
[MODS][CM9 RC2] Windows style task switcher+Center Lockscreen clock+smoothscroll mod
Thanks to wayland for his CM9 RC2.
Thanks to evilisto for his guide of windows style task switcher
Thanks to AndroidON for his guide of smoothscroll mod
Thanks to King ACE,Ace king 34,and -RDR- for testing.
Feel free to notify in case I forgot to add your name here
users please report bugs if any
If you like my work then take a potato and worship it
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
[MOD] CM9 Increased System Volumes
I just flashed CM9 Alpha 11 by dhiru1602 and noticed that the Touch Sound, Lock Sound and Unlock Sound was too quiet and not noticeable. So I have increased their volume and is available for anyone to try!
Downloads :
Effect_Tick.ogg
Lock.ogg
Unlock.ogg
If you want to flash this MOD from CWM, download this zip file:
Increase Volume (Credits: frapeti)
NOTE:
Take a backup of the files you are going to replace before continuing. If you don't like the new modded audio files, you can always revert back to the original one's!
Instructions
Manually Replacing:
1. Using Root Explorer, go into System/Media/Audio/UI and take a backup of the original audio files you want to replace.
2. Replace the original file with the downloaded one.
3. Change the permission to "RW-R--R--".
Flashing Through CWM:
1. Go into recovery mode.
2. Select "Install zip from sdcard"
3. Navigate to the folder where you saved the flashable .zip file and select it.
4. Flash it!
Reboot your phone and the volume will be increased!
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
Default [MOD][CM9]Multitasking mod / app switcher for cm9 Pico mdpi
Thanks to evilisto, I was able to mod and compile a multitasking/app switcher mod for cm9 HTC Explorer/pico (mdpi) that looks a lot more pretty. (see attachment)
v1 Features:
Dark grey backgroud.
Horizontal navigation between apps.
Swipe up or down to kill app.
Large, beautiful looking thumbnail.
v1a Features:
Same as v1 but changed background to give windows mobile look (looks much prettier).
v2 Features (Sense 4 Multitasking - what's different):
Added code to generate gradient in background.
Added title Recent Apps.
Added thumbnail Reflection.
Added display of icons above the app title.
Added tilt/rotate to thumbnail.
Note: Some people have asked me how to enable landscape view. Landscape view will work only if you are already in an app which is in landscape mode when launching app switcher or if in landscape mode in your launcher (if enabled). This will work for v1, v1a and v2 and all future versions as well.
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
I also uploaded TWO uninstallers, one for hehappy's ROM and one for neko95 ROM, the uninstallers include the original "systemui.apk", "framework-res.apk", "framework.jar", "services.jar", "lock.ogg", "unlock.ogg" and "Effect_Tick.ogg" from each ROM and it will revert every mod you have flashed involving the above files. (Use in case of bootloop or in case you want to use a different mod)
How to install the mods? Download file, boot into recovery, flash the file, wipe dalvik-cache and reboot.
How can I find time to search, test and make dumb threads like this one? I'm unemployed! ._. !!
Have fun.
Click to expand...
Click to collapse
Goodies! Too bad I am on AOKP so the lockscreen I have been waiting for is not supported on this ROM.
--
P>
Sent from my LG-P500 using xda app-developers app
don´t work on oxygen ics rom
Nope, IIRC Oxygen ROM isn't compiled from the same sources as Hehappy's.
These mods should work on:
Hehappy's Lastkiss CM9
Neko's IcySnap CM9
JedduRocks WhiteHawk CM9 (It's hehappy's ROM with some scripts inside)
Xperia ICS V2 CM9 (It's a themed hehappy's ROM)
zeratos said:
Nope, IIRC Oxygen ROM isn't compiled from the same sources as Hehappy's.
These mods should work on:
Hehappy's Lastkiss CM9
Neko's IcySnap CM9
JedduRocks WhiteHawk CM9 (It's hehappy's ROM with some scripts inside)
Xperia ICS V2 CM9 (It's a themed hehappy's ROM)
Click to expand...
Click to collapse
Right, but it may brake the icysnap theme
Sent from my LG-P500 using xda premium
FPChaim said:
Right, but it may brake the icysnap theme
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
zeratos said:
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
Click to expand...
Click to collapse
Well, I'm on cyan mobile righ now, I'm just saying that because this happened to my mod and I had to do one separated version for gingersnap
Sent from my LG-P500 using xda premium
zeratos said:
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
Click to expand...
Click to collapse
Wow soft keys in statusbar, it is tempting enough for me to switch to CM9 and test, great work, thanks!
Sent from my LG-P500 using xda premium
could the people who downloaded the 4x lock screen report back so people can know if it is working fine? D:
zeratos said:
could the people who downloaded the 4x lock screen report back so people can know if it is working fine? D:
Click to expand...
Click to collapse
Tested it, i can't unlock the phone
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
zeratos said:
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
Click to expand...
Click to collapse
Looks like he already has:
http://forum.xda-developers.com/showpost.php?p=34296746&postcount=5342
zeratos said:
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
Click to expand...
Click to collapse
> Already did
Ah, that's awesome , are you going to add the blackberry unlock too? Or just that one?
Btw, I was messing with the lock screen and IT DOES UNLOCK THE SCREEN you just have to slowly drag it to your upper right corner.
zeratos said:
Ah, that's awesome , are you going to add the blackberry unlock too? Or just that one?
Btw, I was messing with the lock screen and IT DOES UNLOCK THE SCREEN you just have to slowly drag it to your upper right corner.
Click to expand...
Click to collapse
Can you do softkeys only without battery line as in original thread? It would be nice.
I tried lg 4x lock screen but it's not optimized for our screen size this is the reason why it doesn't work now
Sent from my LG-P500 using Tapatalk 2
myawan said:
Can you do softkeys only without battery line as in original thread? It would be nice.
Click to expand...
Click to collapse
Already did, the link is on the main post.
zeratos said:
Already did, the link is on the main post.
Click to expand...
Click to collapse
Thanks, is it working with GenetICS? Can we have home key instead of menu?
Sent from my LG-P500 using xda premium
myawan said:
Thanks, is it working with GenetICS? Can we have home key instead of menu?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
No, none of these mods work on hehappy's last update (GenetICS).
Unless the developer of the mod shares the method to implement the keys it can't be done, sorry.
tapatalk said:
:thumbup::thumbup:
:beer::beer:
Sent from my GT-P3110 using Tapatalk HD
Click to expand...
Click to collapse
What? D:
I things its working just try.make backup first.

Mod to remove Navigation Bar (navbar) on Droid Razr HD

This issue has been important for me since I purchased my Verizon Droid Razr HD Maxx (consumer edition). I wanted to be able to remove the navbar on the bottom of the screen and take advantage of the full screen. Apparently AOKP roms have this capability and you can toggle via power button menu, but there is no AOKP version available for Razr HD. I tried all the mods I could find in the forums (generally written for Nexus phones/tablets). These are the following:
1. Adding the following line to build.prop: "qemu.hw.mainkeys=1" (without quotes). I tried this on the rooted stock JB rom and on Batakang rom. In both cases, the mod causes both navigation bar (bottom of screen) and status bar (top of screen) to disappear, with frequent UI crash messages.
2. Editing the framework-res\res\values\bools.xml and changing the value of ”config_showNavigationBar” from "true" to "false". This is discussed in detail in the following link: http://www.androidincanada.ca/news/make-your-galaxy-nexus-full-screen/ I did not try this mod on rooted stock JB (since I made a flashable zip out of my new framework-res.apk and safestrap won't allow zip installation in the stock slot). I tried this mod only on the Batakang rom. The mod causes both navigation bar (bottom of screen) and status bar (top of screen) to disappear, with frequent UI crash messages, similar to previous mod.
3. In retrospect, I wonder what would have happened if I tried both mods listed above at the same time. It may have worked. I may try this later. But then I installed CM10 beta rom by dhacker and tried the FullScreenToggleV2.apk mod provided in this link: http://forum.xda-developers.com/showthread.php?t=1497558 This worked like a charm, without any crashes or any disruption of the status bar. This apk inserts the "qemu.hw.mainkeys=1" line in your build.prop (the same as mod #1 listed above) but it's easier since you don't have to manually edit your build.prop. I tried this mod on rooted stock JB rom and Batakang rom, but it had the same (failed) results as in mod #1 above. So it only works for CM10 rom by dhacker on my XT926. I suspect it will also work in CM10 on XT925 (by epinter) but I don't have one to try.
Ideally there would be a mod that would work on the rooted stock JB rom. But short of that, at least it's reassuring that the Razr HD navbar can be removed in the CM10 rom. One could hope it may even be added as a CM10 feature later on
*** Important Note: if you attempt this, obviously you would need another way to navigate through your screens. I use LMT listed under mod #3 link above. There are other options available also. Just make sure to install some app that provides an alternative method of navigation before you try the mod.
Good luck!
Very interesting! Worth looking at this
ajal said:
This issue has been important for me since I purchased my Verizon Droid Razr HD Maxx (consumer edition). I wanted to be able to remove the navbar on the bottom of the screen and take advantage of the full screen. Apparently AOKP roms have this capability and you can toggle via power button menu, but there is no AOKP version available for Razr HD. I tried all the mods I could find in the forums (generally written for Nexus phones/tablets).
Ideally there would be a mod that would work on the rooted stock JB rom. But short of that, at least it's reassuring that the navbar can be removed in the CM10 rom. One could hope it may even be added as a CM10 feature later on
*** Important Note: if you attempt this, obviously you would need another way to navigate through your screens. I use LMT listed under mod #2 above. There are other options available also. Just make sure to install some app that provides an alternative method of navigation before you try the mod.
Good luck!
Click to expand...
Click to collapse
Hello, thank you very much for this. I've been looking for something like this. I guess my search ways are not the best.
About LMT, what devise did you choose? I chose Droid Razr, but I can't get the swipe gestures to work.
But I'm using swipepad for navigation, so no problem going from one app to the other. The problem I still need to solve is the menu key to show.
Anyway, thank you very much.
I use the PIE feature in LMT and don't pick any device (I guess it just goes with default). It just works. Haven't tried gestures since it typically needs two handed phone operation. Not sure what your menu button problem is but the PIE feature has a menu button as well.
Thank you for your answer. I will use Pie then.
I was using the Tablet UI, just so I can have more screen space, but as a result, most of my fonts were really small. Now I can go back to 320 dpi.
Thank you again.
Is it easy to disable as well?. Like if i tried it on cm10 and i wasn't liking it can i just uninstall it or factory reset or flash cm10 over again?
Sent from my DROID RAZR HD using Tapatalk 2
Yes. It's very easy to bring the navbar back. You don't need to factory reset or flash CM10 over again. If you use the app in mod#3 above, the app has a button to re-enable the navbar (remember, don't uninstall the app, just run it again and choose the other button). Or you could edit your build.prop and remove the "qemu.hw.mainkeys=1" line (reverse of mod #1 above, as mod #1 should work in CM10, and the app seems to do the same thing as mod #1). I think it also works if you change the value of "qemu.hw.mainkeys" to 0 instead of 1. You just have to reboot every time to see the changes.
did anyone get this to work on another rom i tried the build.prop edit but did the same as what OP said
I use the LMT and the Full screen toggle with Cm 10.1 with great success. No problem so far. Just be careful to have access to LMT all the time.
estuardo4 said:
I use the LMT and the Full screen toggle with Cm 10.1 with great success. No problem so far. Just be careful to have access to LMT all the time.
Click to expand...
Click to collapse
can you tell me where the full screen toggle is?? I've been hunting for it forever. CM10.1 beta here also
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi Motorola RAZR HD usando Tapatalk 2
I'm having system ui crash constantly on stock. Anybody found a way that works on stock?
@Pzyduck : how'd you do that
Sent from my XT925
My system UI on stock crashed as well, but my CM 10 works great. Bump for a rooted stock solution if available. But until then it's awesome that there is at least one working navbar mod out there
Sent from my DROID RAZR HD using xda app-developers app
rockstarr001 said:
can you tell me where the full screen toggle is?? I've been hunting for it forever. CM10.1 beta here also
Click to expand...
Click to collapse
It's an app
FullscreenToggle
Sent from my MotoAHD Maxx
Hopefully stock solution is found.
Remove NavBar But use Task Bar with no FC or issues.
ajal said:
This issue has been important for me since I purchased my Verizon Droid Razr HD Maxx (consumer edition). I wanted to be able to remove the navbar on the bottom of the screen and take advantage of the full screen. Apparently AOKP roms have this capability and you can toggle via power button menu, but there is no AOKP version available for Razr HD. I tried all the mods I could find in the forums (generally written for Nexus phones/tablets). These are the following:
1. Adding the following line to build.prop: "qemu.hw.mainkeys=1" (without quotes). I tried this on the rooted stock JB rom and on Batakang rom. In both cases, the mod causes both navigation bar (bottom of screen) and status bar (top of screen) to disappear, with frequent UI crash messages.
2. Editing the framework-res\res\values\bools.xml and changing the value of ”config_showNavigationBar” from "true" to "false". This is discussed in detail in the following link: http://www.androidincanada.ca/news/make-your-galaxy-nexus-full-screen/ I did not try this mod on rooted stock JB (since I made a flashable zip out of my new framework-res.apk and safestrap won't allow zip installation in the stock slot). I tried this mod only on the Batakang rom. The mod causes both navigation bar (bottom of screen) and status bar (top of screen) to disappear, with frequent UI crash messages, similar to previous mod.
3. In retrospect, I wonder what would have happened if I tried both mods listed above at the same time. It may have worked. I may try this later. But then I installed CM10 beta rom by dhacker and tried the FullScreenToggleV2.apk mod provided in this link: http://forum.xda-developers.com/showthread.php?t=1497558 This worked like a charm, without any crashes or any disruption of the status bar. This apk inserts the "qemu.hw.mainkeys=1" line in your build.prop (the same as mod #1 listed above) but it's easier since you don't have to manually edit your build.prop. I tried this mod on rooted stock JB rom and Batakang rom, but it had the same (failed) results as in mod #1 above. So it only works for CM10 rom by dhacker on my XT926. I suspect it will also work in CM10 on XT925 (by epinter) but I don't have one to try.
Ideally there would be a mod that would work on the rooted stock JB rom. But short of that, at least it's reassuring that the Razr HD navbar can be removed in the CM10 rom. One could hope it may even be added as a CM10 feature later on
*** Important Note: if you attempt this, obviously you would need another way to navigate through your screens. I use LMT listed under mod #3 link above. There are other options available also. Just make sure to install some app that provides an alternative method of navigation before you try the mod.
Good luck!
Click to expand...
Click to collapse
Upgrade to JB there are option in the forum if not available with your carrier and use Option 1, Ready it works OK, I use Gmd Gesture Control Instead of NavBar; Enjoy!!
BTW I use the FW from Canada and files to use it with telcel in Mexico, it works great, well menu appears and hide in some apps and you must try again but its usable.
Calvinx1 said:
Upgrade to JB there are option in the forum if not available with your carrier and use Option 1, Ready it works OK, I use Gmd Gesture Control Instead of NavBar; Enjoy!!
Click to expand...
Click to collapse
So on stock JB the build.prop edit works?
Sent from my XT925
saloums7 said:
So on stock JB the build.prop edit works?
Sent from my XT925
Click to expand...
Click to collapse
Yeah. That's what the full screen toggle app is doing. Just writes to the build.prop
Youngunn2008 said:
Yeah. That's what the full screen toggle app is doing. Just writes to the build.prop
Click to expand...
Click to collapse
I know I'd just rather do it myself and on ICS SystemUI crashes constantly after adding the line. Is that still happening on JB or does it hide it properly?
saloums7 said:
I know I'd just rather do it myself and on ICS SystemUI crashes constantly after adding the line. Is that still happening on JB or does it hide it properly?
Click to expand...
Click to collapse
I'm using the fullscreen toggle right now and no force closes

[ROM][CM7.2][FireKernel OC]Adwhite By Adwait|Fast+Beauty+BatteryMonster|Indian Lang.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello,
1st of all thank you for your interest in this ROM. My previous ROMs received good feedback which made me to cook more and more ROMs. Now today I am publishing my "the best" ROM ever built by me. It's more beautiful, more powerful, more stable, and lots of more....! So here I am presenting my Adwhite ROM.
Please read the complete thread carefully to avoid any issue while flashing this ROM. Wish you a happy flashing!!!
==================================================================================================
Screenshots:
==================================================================================================
ROM Specifications:
Looks:
- White themed UI
- All included apps themed white.
- Clock widget themed to white.
- Lockscreen Holo style included.
- Stylish lockscreen clock font.
- Adw launcher
- usb connect white themed
Performance:
- deodex
- firekernel OC upto 964 MHz by dragonnn
- dalvik.vm.heapsize raised to 64m.
- no bootanimation
- just 77mb of size. Removed all unwanted media files,apps
- Battery monster (I mean it!! )
- Smooth scrolling and UI
- Adw launcher
- Devanagari support for partial rendering of Indian languages
- Adrenaline™ Engine V4.4
- Adrenaline™ Boost V3
- Beats Audio engine
- ALSA scripts
- AudioFX Widget
- QuickPic as default gallery app
- MixZing Basic player as default music player. (Please don't use mixzing equalizer. It will not work. Use AudioFX instead!)
- GPS tweaks for quick fix.
- Working Torch app with status bar widget
- Google Play Store 3.10.10 (Latest)
- Superuser 3.1.3 (Latest)
- Hacked host file for adblock,better privacy,avoiding harmful sites and to keep trojons away while surfing the net.
==================================================================================================
Bugs:
No bug reported!
==================================================================================================
How to install:
1.Boot in recovery CWM 5
2.Wipe data/factory reset
3.Wipe cache
4.Advanced>>Wipe dalvik cache
5.format cache/data/system/sd-ext
6. MOUNT DATA
7.Choose 'Install zip from sd card'
8.Choose the file 'AdwhiteByAdwait.zip '
9.Reboot after the flashing completes. 1st reboot may take 3-4 minutes. After 1st reboot and setting account, 2nd boot is recommended.
Please watch this video if you get any error. This tutorial will demonstrate the complete flashing procedure of "Adwhite By Adwait" ROM.
1st of all sorry for my horrible english! lolz! if you have an option I would suggest "mute" this video!! lolzz!
==================================================================================================
Credits:
CMteam for base rom
dragonnn for FireKernel OC
imbawind for Adrenaline Boost and Adrenaline Engine
Lovetz for beats audio+alsa+AudioFXwidget
ClassicalGas for JAMT theme.
Araviel for Aerish GTX
And all those who directly or indirectly contributed in this ROM.
Special Thanks For testing this ROM before publishing! Thanks guys!:
.dredd.
dm228183
fernandojhr
dszymek
LuisUrrutia
kingspalace007
situ1962
==================================================================================================
Download:
mediafire: http://www.mediafire.com/?qq3i64sa5uxu9b4
==================================================================================================
CAUTION:
PLEASE DO NOT INSTALL ANY ADDITIONAL SCRIPT! YOU MAY RESULT IN BOOTLOOP!
==================================================================================================
Note:
1. Use link2sd application from PlayStore for using partition of your sd card. It's not included in this ROM
2. Please don't use mixzing equalizer. It will not work. Use AudioFX instead which is already included in this ROM under widget.
3. If you use different launcher than the default one, the icons which are themed white may be replaced with the icons provided with installed launchers.
4. FM radio is the default application from CM team without RDS. The radio uses Bluetooth chip for transmission. So it will start bluetooth when you power on FM. It's normal and not a bug!
5. This ROM allows upto 964Mhz OC, but those who wants to get higher batterybackup, just underclock your CPU. Here's the trick posted by me : http://forum.xda-developers.com/showpost.php?p=27469465&postcount=26
6. Those who want to change icons Just search on playstore with "adw launcher theme" and you will find 100s of icon packs! For this theme I will suggest Aerish adw theme since the icons are taken from the same.
7. For USB th please Download this app and install: http://code.google.com/p/android-wired-tether/downloads/detail?name=wired_tether_1_4.apk&can=2&q=. Did not got the reply from developer so can't add in the ROM.
8. For better GPS fix according to your location you can edit system/etc/gps.config with following. By default it's europe and it works well with almost everywhere. Tested by myself in India(Asia).Only do the changes if you know what you are doing.
Code:
Europe — europe.pool.ntp.org
Asia — asia.pool.ntp.org
Oceania — oceania.pool.ntp.org
North America — north-america.pool.ntp.org
South America — south-america.pool.ntp.org
Africa — africa.pool.ntp.org
9.To remove google search box from mainscreen go to adw launcher settings>>screen>>actionbar design>>chooese Disabled.
10. App2SD or S2E may not work. Use Link2Sd
==================================================================================================
I hope you love this ROM. Please provide your feedback, suggestions. I tested this ROM for 3 days and found no bugs. So please let me know if you find any!
If you want to add the banner of this ROM in your signature, please use the code below!
PHP:
[URL="http://forum.xda-developers.com/showthread.php?t=2086780"][IMG]http://i977.photobucket.com/albums/ae260/adwaitk007/adwhite/adwhitesmallbanner-01_zps49be9912.png[/IMG][/URL]
Regards,
Adwait
www.adwaitk007.info
www.listenmymp3.com
Here are some screenshots showing partial rendering of indian languages hindi, tamil, telugu, Malayalam. (ss taken in night mode )
njoy the ROM
Looks interesting...will check it out.
Nice effort, good to see you coming out with new ROMs. I know the theme you have used is JAMT White I hope you have taken permission from the developer "Classical Gas"(An e-mail to them atleast) . Please correct me if I am wrong about you using the theme.
TJ_Ahluwalia said:
Nice effort, good to see you coming out with new ROMs. I know the theme you have used is JAMT White I hope you have taken permission from the developer "Classical Gas"(An e-mail to them atleast) . Please correct me if I am wrong about you using the theme.
Click to expand...
Click to collapse
Yeah! please read the credits!
Sorry.. Any way, wish you best of luck for this ROM and hopefully other upcoming ROMs...
TJ_Ahluwalia said:
Sorry.. Any way, wish you best of luck for this ROM and hopefully other upcoming ROMs...
Click to expand...
Click to collapse
np! Have nice day!
I really like you ROM, we'll see about the battery life in the next few days.
But all in all I like simple Themes more ... can I just install another ADW-Theme, or will it lead to problems?
melltuga said:
I really like you ROM, we'll see about the battery life in the next few days.
But all in all I like simple Themes more ... can I just install another ADW-Theme, or will it lead to problems?
Click to expand...
Click to collapse
yes you can!! It will not make any trouble! Try, customize as per your choice
Battery will definitely amaze you!
Can you make flashable zip for jellybean statusbar.
Sent from my GT-S5830 using xda app-developers app
JACM- Just another CM7 ROM
JATR- Just another Themed ROM
BTW what you have done to increase battery life. BTW only kernel can make battery life better because of UV and steps of frequency and yes governor... I don't think and tweaks or script can made battery life better because it's depend on usage and yes according to brightness and kernel.... Though it is a constructive criticism.....
No offence
aniket_dust said:
Can you make flashable zip for jellybean statusbar.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Will try dude!
free2choose said:
JACM- Just another CM7 ROM
JATR- Just another Themed ROM
BTW what you have done to increase battery life. BTW only kernel can make battery life better because of UV and steps of frequency and yes governor... I don't think and tweaks or script can made battery life better because it's depend on usage and yes according to brightness and kernel.... Though it is a constructive criticism.....
No offence
Click to expand...
Click to collapse
JABC Just Another Baseless Comment!
Yes it's Cm7, yes it's themed that's why it's in Android development section not in "original development" section!
Dude 1st try the ROM and then speak! and lolz you must have missed the features section!
I will try it. Report later
Sent from my GT-S5830 using Tapatalk 2
refazta90 said:
I will try it. Report later
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
hey thanks! I am waiting to get your feedback!
Hey, how is it going?
Been testing your rom for a few days already. Let me start by saying Great Work!. It has great speed, and battery duration, it also feels very smooth while handling.
A few problems I've found:
On Google Play, I'm not able to install Foursquare because it detects it as an non compatible device, when it works on all the other roms i´ve tried.
When using S2E, works fine until you try to install an application from the SD card, then it reboots everytime you try.
Also, when you try to connect to the PC via Wondershare or any other software that connects to the phone and is able to install apps, It reboots everytime it tries to install one.
The last 2 only happen with S2E installed. Removed it and tried with Link2SD and that one works fine. Could you add the S2E support?
I haven´t found the non-compatible device problem with the other apps that I use, but there could be others.
PD: Great job with the rom. :good:
Trinexus said:
Hey, how is it going?
Been testing your rom for a few days already. Let me start by saying Great Work!. It has great speed, and battery duration, it also feels very smooth while handling.
Click to expand...
Click to collapse
Thanks!
A few problems I've found:
On Google Play, I'm not able to install Foursquare because it detects it as an non compatible device, when it works on all the other roms i´ve tried.
When using S2E, works fine until you try to install an application from the SD card, then it reboots everytime you try.
Also, when you try to connect to the PC via Wondershare or any other software that connects to the phone and is able to install apps, It reboots everytime it tries to install one.
The last 2 only happen with S2E installed. Removed it and tried with Link2SD and that one works fine. Could you add the S2E support?
I haven´t found the non-compatible device problem with the other apps that I use, but there could be others.
PD: Great job with the rom. :good:
Click to expand...
Click to collapse
Maybe try installing Foursquare off market. Also Link2SD will work with this ROM. I suppose it's the kernel issue! I will update this in my 1st post.
adwaitk007 said:
Thanks!
Maybe try installing Foursquare off market. Also Link2SD will work with this ROM. I suppose it's the kernel issue! I will update this in my 1st post.
Click to expand...
Click to collapse
I believed foursquare cannot run in this ROM.. I try it with non market app.
Sent from my GT-S5830
athe_s said:
I believed foursquare cannot run in this ROM.. I try it with non market app.
Sent from my GT-S5830
Click to expand...
Click to collapse
hmm! It seems kernel issue!
adwaitk007 said:
hmm! It seems kernel issue!
Click to expand...
Click to collapse
Any fix bro..
Also i have found when using cronmod int2ext4+ the batery script has lost it abilty to make battery monster.
The battery jump so fast to drop for about 8 - 10 hours normal use. I try it full charge in the morning and then charging at noon..
Sent from my GT-S5830

[GUIDE]How to setup 240 dpi on your rom

Hey everyone.
This is my first post in s3 section. I made a guide on how to setup 240 dpi on note 2 and I thought it would be a great idea since the requisites are available for both the phones.
UtkarshGupta said:
Hey everyone
This is my first guide so please be polite
In this guide I will show you how to setup 240dpi or possibly any dpi on your rom.
Links to all the requisites will be given below.
But what is dpi ?
It is the value that manages most ui of the system. a lower dpi means everything would be smaller hence more things could be fitted in the giant screen we have. a higher means everything would be larger hence less could be fitted into the screen
Before We Begin I Want To Clarify The Following-
1)First and foremost I am not responsible for any damage you cause.
2)I assume you have already rooted your phone and have some experience with rooting.
3)You have made backup to be sure that in case you mess up you you can return to what it was like before.
4)Read the whole post before actually starting.
5)Please Hit Thanks If I Helped You
So let's Begin-
1)Download and setup xposed framework (Very good instructions on how to do it in the thread) (You need to reboot).
2)Download these modules - xposed app settings , gappscrashfix , all apps in play store.
3)Enable all the 3 modules (You need to Reboot).
4)Now open xposed app settings and set open each app listed below and in dpi enter 320 but don't change anything else.
-calculator
-camera
-clock
-contacts
-dialer storage
-fm radio
-messaging
-task manager
-touchwiz home
-weather widget main
Now some of these could be skipped or some could be added(can be tested but imao that will make the ui ugly but still it's completely your choice).
Also modded versions of some of these apps has been provided by bala_gamer.
5)Before we begin copy the modded samsung keyboard from the link given or setup some other keyboard and make it default.
6)Now open /system/build.prop or use a build.prop editor if you are very conscious and change the following line "ro.sf.lcd_density=320" to "ro.sf.lcd_density=240"
7)Now before we reboot we need to include apply one fix , so instead of rebooting , power off your phone
8)Then go into recovery and flash the modded samsung keyboard.
9)Reboot and enjoy 240dpi.
Note -
1)The stock keyboard will constantly force close on 240 dpi (if you use xposed settings to set it to 320dpi, you will be practically unable to use it), so bala_gamer(thank him) has customized it to work properly on 240 dpi.
2)Recovery must be custom (ofcourse ).
3)Be sure to flash the correct version of modded apps (i.e. 4.1.1 if you have it or 4.1.2 if you have that)
4)I don't know if gappscrashfix and allappsinplaystore are actually required but nothing bad in using it.
5)I know the explanation of dpi is incorrect but that's all you need to know.
6)Installing xposed framework doesn't affect simplistic framework at all.
7)The gappscrashfix and allappsinplaystore you download would be in .zip format. Just rename them to .apk and you can install it then.
8)Many apps especially the system ones or samsung ones aren't ment to scale well. They are just meant to look good at 320dpi so they will look way ugly at 240dpi. To fix this xposed settings is used. You need to set it for each app that you think is ugly.
9)Please Hit Thanks If I Helped You
Finally the links-
1)xposed framework - http://forum.xda-developers.com/showthread.php?t=1574401 (Link to modules page in his thread).
2)modded apps - http://forum.xda-developers.com/showthread.php?t=2001577
And not to forget credits
-rovo89 for framework
-bala_gamer for modded apps
-numerous other people who helped me in some way or the other (please pm me if I forgot anyone).
Click to expand...
Click to collapse
The guide is exactly same so I am quoting it.
All that is changed that you have to get modded apps from this thread - http://forum.xda-developers.com/showthread.php?t=1873026
Nice one but I prefer this https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi
Easy to use and works perfectly
Sent from my GT-I9305 using xda app-developers app
djembey said:
Nice one but I prefer this https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi
Easy to use and works perfectly
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
That just modifies the DPI in build.prop. It does not make apps scale selectively. If I'm not mistaken, the Xposed FW is like what Paranoid Android has with its Hybrid engine, where you can selectively scale apps.
djembey said:
Nice one but I prefer this https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi
Easy to use and works perfectly
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Correct but that will only do the step 6 of this guide if I am not wrong and most of the ui would be broken
Sent from my GT-N7100 using xda app-developers app

[Q&A/T][ROM][The GNOME Project]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread has been created strictly for
Questions & Troubleshooting
Specific to
The GNOME Project
This thread has been created for people to share issues, question and help
while using this version of The GNOME Project
DEVELOPMENT THREAD
Video Review of this ROM
Please do not clutter the Development thread with non development-related chatter​
Frequently asked Questions
Frequently asked Questions
Q: What is Xposed?
A: http://forum.xda-developers.com/showthread.php?t=1574401
Q: Is this ROM rooted
A: Yes
Q: What Modules can I put here?
A: http://forum.xda-developers.com/showthread.php?t=2327541"
Q: Do you have any plans to add some customizations here in the future?
A: Speed Enhancements YES, Customizations, I leave them up to you, use Xposed.
Q: Can I flash kernel X, Y Z?
A: Yes as long your flashing the correct one. (JSS for JLS, JWR for JWR)
For Bug reporting please post it in the DEV THREAD all non related development topics you can post it here. Need to follow XDA Rules now. Thanks and God Speed!
CUSTOMIZE that stock ROM!!
-=The Gn0m3 Project tips and tricks=-
How to make this ROM look and act like any other ROM you want.
PA:
***Download App Settings from settings - xposed framework - download
***Install it and activate the module
***Reboot
***Open the app and search for Settings
***Click on it and flick the switch
***Change its settings accordingly to make it look like a tablet version of the settings app (you can change the res to do so) Some text may be ended with the three dots "..." so lower it's dpi too.
***Make some modifications to any app you want, and you juat got a PA ROM.
Click to expand...
Click to collapse
HALO:
***Download two apps: floating notifications app from the playstore, and xhalofloatingwindow module.
***Activate the module and reboot
***Go to Floating Notifications, then to App Notifications and enable all of them
***From there you have activated "HALO" and you can customize it from the Floating Notifications app. As foe the actual window, go to XHaloFloatingWindow and you can customize that one too.
Click to expand...
Click to collapse
CM:
***Download GravityBox from settings - xposed framework - download
***Install it and activate the module
***Reboot
***Open it, go to statusbar tweaks - pie controls and enable it
***Go back to statusbar tweaks then click QuickSettings management
***Make changes accordingly
***Go back to the first screen of the app, then click Display tweaks
***Expanded desktop mode should be set to hide navbar (at least)
***Reboot, and enjoy pie with custom QuickSettings panel... a CM ROM.
Click to expand...
Click to collapse
AOKP:
uhh... i've never tried AOKP, what are its specialties? lol
Click to expand...
Click to collapse
How to make use of all your 2GB of RAM:
Use V6 Supercharger with the ultimate jar tool to patch your minfrees, bulletproof your launcher, and make your phone a multitasking BEAST.
Link to the V6 thread: http://forum.xda-developers.com/showthread.php?t=991276
Click to expand...
Click to collapse
Volume Wake:
***Download MoDaCo Toolkit
***Scroll down to htc one, click enable volume wake.
***Do any kind of reboot (normal or soft)
Click to expand...
Click to collapse
what i got from gnome:
-custom launcher (nova)
-HALO (gravitybox)
-PIE (gravitybox)
-custom quick settings (gravitybox)
-custom theme (XThemeEngine)
-some changed dpi (AppSettings)
-custom navbar theme and a persistent menu button (Xblast Tools)
-custom lockscreen (XlockY)
can't seem to find in gravitybox nav bar height and volume wake or another module to do this modifications...if you can help pls
vraciu4you said:
can't seem to find in gravitybox nav bar height and volume wake or another module to do this modifications...if you can help pls
Click to expand...
Click to collapse
gravitybox - navigation bar tweaks, you can customize navnar height there.
as for volume wake, i don't have a module currently installed that has that.
Sent from my Mako
So the first release is the only release so far? Because in the original development forum in the op under expected features says more butter and speed. Eagerly awaiting this butter/speed update
Sent from my Nexus 4 using Tapatalk 4
TheNerd:] said:
So the first release is the only release so far? Because in the original development forum in the op under expected features says more butter and speed. Eagerly awaiting this butter/speed update
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
Yeah once I see a new changes or tweaks in Skia and Bionic I'll definitely update it, but the ROM is currently fast and stable so try it out.
So I really like this ROM thanks for it..
Only issue I been having is that google wallet doesn't work. I have no option to tap and pay, I finally was able to restore an old version of google wallet and its giving me this error: Google wallet is not yet available for your device or mobile network..
I am thinking maybe its a build.prop issue?
ogrillion said:
So I really like this ROM thanks for it..
Only issue I been having is that google wallet doesn't work. I have no option to tap and pay, I finally was able to restore an old version of google wallet and its giving me this error: Google wallet is not yet available for your device or mobile network..
I am thinking maybe its a build.prop issue?
Click to expand...
Click to collapse
I'll look that up. Thanks for the heads up!
Gn0m3 said:
I'll look that up. Thanks for the heads up!
Click to expand...
Click to collapse
Ok so I think I fixed it.. I just had to change a few values in the build.prop.. heres what I changed.
ro.product.model = Nexus 4 (changed from Mako)
ro.product.brand = google (changed from Android)
ro.product.name = occam (changed from full_mako)
Seemed to have fixed it
I can't seem to find out which module made the report button say "reboot" instead of "report"... very weird thing, but it's not that big of a deal.
Sent from my Mako
Another question, its not a huge deal and it might just be a module I have enabled..
But sometimes I get stuck in a weird loop.. like I am in a app hit the recent app menu, go into another app and then if I hit back key it goes back to the recent menu, then if I hit back again goes back to the app, hit back again it goes back to recent apps. etc etc
I don't think stock ever did that.. Its not a huge deal just odd?
*edit* I can't duplicate it but it happens..
ogrillion said:
Another question, its not a huge deal and it might just be a module I have enabled..
But sometimes I get stuck in a weird loop.. like I am in a app hit the recent app menu, go into another app and then if I hit back key it goes back to the recent menu, then if I hit back again goes back to the app, hit back again it goes back to recent apps. etc etc
I don't think stock ever did that.. Its not a huge deal just odd?
*edit* I can't duplicate it but it happens..
Click to expand...
Click to collapse
It might be the modules, This is pure Stock unless you enabled some modules into it.
ogrillion said:
Ok so I think I fixed it.. I just had to change a few values in the build.prop.. heres what I changed.
ro.product.model = Nexus 4 (changed from Mako)
ro.product.brand = google (changed from Android)
ro.product.name = occam (changed from full_mako)
Seemed to have fixed it
Click to expand...
Click to collapse
Yeah, forgot that since it's AOSP. Lol! I'll fix it on the next release.
Gn0m3 said:
Yeah, forgot that since it's AOSP. Lol! I'll fix it on the next release.
Click to expand...
Click to collapse
Np! Thank you again for a great rom.. Really loving it..
Question, if its too much trouble don't worry about replying.. But I been wanting to someday build my own ROMs from source, now I googled and found some easy enough guides about making a build enviroment and building from source etc.. But what I was curious about is building with different toolsets (like saber) and also what is involved in cherry picking from other roms.
Any good noob guides that you have used / know of that could help me learn?
Again thank you so much for a great rom
I'll guide you when you're available. Just PM me.
Riro Zizo said:
gravitybox - navigation bar tweaks, you can customize navnar height there.
as for volume wake, i don't have a module currently installed that has that.
Sent from my Mako
Click to expand...
Click to collapse
Found volume wake option in modaco toolkit under htc one options(after enable it you must do a soft reboot to make it work), for those that like this option on their rom :d
Sent from my Mako using Tapatalk 4
Guys, I'm sorry my laptop decided to go haywire again, but don't worry I was able to fix this before and I know I'll be able to fix this again. I'll keep ya'll updated.
vraciu4you said:
Found volume wake option in modaco toolkit under htc one options(after enable it you must do a soft reboot to make it work), for those that like this option on their rom :d
Sent from my Mako using Tapatalk 4
Click to expand...
Click to collapse
added to the third post, thank you very much.
Sent from my Mako
Ah bummer about the laptop.
Looks like what I got to do with my wife's laptop, her DC jack needs to be replaced and I keep putting it off.
Sent from my Mako using xda app-developers app

Categories

Resources