Updating rooted nexus 10 - Nexus 10 Q&A, Help & Troubleshooting

Im done searching, i cant make any sense of it. im a new android user and i just want to update my device from 4.2.1 to 4.2.2..
Ive tryed downloading it manually from http://www.androidpolice.com/2013/0...jdq39-for-the-nexus-7-and-nexus-10-right-now/ and install it when from (when the tablet is shutdown and i hold both 3 buttoms and come into a boot screen??) i dont know the name of it but anyways. i select install zip from sd card and i then select the file ive downloaded but the installation aborts. i read in some thread that if i have a custom kernel ( i have francos) it cannot install updates that way?
Could someone please describe to me how to install the update in NEWBISH l​​languages?
If i have to remove franco kernel to install the zip file how do i remove it?
Please answer in simpel steps
Thanks

Related

[Q] INSTALLING UPDATE.ZIP Files

Hello World,
I am a little confused, I have tried to understand how to install update.zip files onto the i9000t but I seem to not understand.
What I do know, is how to use Odin and install files, either a single file or individually. Can someone please give me a step by step or point me to a thread on installing update.zip? Im a beginner that whats to make the most of my phone.
Also can I backup as everytime I update my PDA file?? I wipe everything Yes Im a battler.
Cheers
Update zip but the first question is what update zip .
Usual zip files install via CWM clockwork mod recovery .
Boot to recovery install sdcard/update/zip.
MUST READ
http://forum.xda-developers.com/showthread.php?t=723596
jje
melbournehiphop said:
Hello World,
I am a little confused, I have tried to understand how to install update.zip files onto the i9000t but I seem to not understand.
What I do know, is how to use Odin and install files, either a single file or individually. Can someone please give me a step by step or point me to a thread on installing update.zip? Im a beginner that whats to make the most of my phone.
Also can I backup as everytime I update my PDA file?? I wipe everything Yes Im a battler.
Cheers
Click to expand...
Click to collapse
You need to have 2E recovery working on your phone in order to install unsigned update.zip files, either check your phone for the 2E recovery by going into 3 button recovery mode (switch phone off, hold volume up, home key and power button until logo appears on screen and let go of all 3) and the screen will say whether you have 2E or 3E recovery mode or here is a link to Chanfires excellent kernels which include 2E recovery but you must flash them with onto the phone with Odin. I'm not too familiar with the i9000t so you had best do some reading up first to make sure it can be done with your phone as you could brick it if the kernel is not for your unit.
Once you have the kernel flashed onto the phone or you have checked and already have 2E recovery, simply make sure the update.zip file is on the root folder of your internal SD and select the install update.zip option in recovery mode (you get into this as described above)

[Q] Still need help with Dexter Mod

I have tried everything in my toolkit to get the Dexter Mod installed on my A7...the new firmware update worked fine, but when i follow the steps for the Dexter mod..in recovery mode, i get a message that says:
Install from sdcard
Finding update package
Opening update package
E:Can't open /sdcard/update.zip
(no such file or directory)
Installation aborted
Formatting MISC...
I even downloaded the Dexter Mod from my computer at work yesterday and brought it home to try to no avail...
Why isn't this working?
Is there another place I can download the Dexter Mod 11 from to get a different file..
How can I be sure I am in the root directory of the sdcard?
I realize i am brand new at this, and i am willing to do the work, but really I am disappointed the the mod will not install..
also, I noticed that when I ran the firmware update, a few programs that I had downloaded were erased...how do i back program up on the A7 so they are not lost
Another question
Is in necessary to install the previos Dexter mods before the 11?
No, you don't need to download the previous ROMs first.
Your download may be corrupted. That happens a lot with large files.
This one is over 90MB.
Getright is a free download manager that helps with this issue.
Get it here:
http://www.getright.com/
Try that and let us know if it works for you.
I installed update.zip from the root directory of sd card (nothing on sd card except Update.zip), from within settings> about> update firmware.
It will go through the steps and boot loop.
U then hold off for 15 secs, then turn on for 3secs, let go and hold till it says > loading boot kernel ( recovery mode), then wipe cache and settings.
Done!!
Whew.
when renaming the file leave out the zip part. i was having the same problem . if you noticed the elocity update doesnot name the update w/ zip at the end
thank you

basic ways to resolve boot loop stuck phones

if you are stuck in boot loop or having difficulty starting your phone, don't worry, there should be a way.
I have experienced this issue today after flashing wrong file causing my phone to stuck in boot loop. after searching in this forum and after spending over 3 hours, I finally managed to restore my phone and it is now working perfectly fine.
therefore, I thought of making a basic guide to try to resolve such issues. please note, this is a very basic guide to resolve problems with starting your phone, I am not professional but will try to share my experience and help anyone in need. this was done on X10i
lets start:
1- if you have a recent back up and have access to xrec, you can simply restore your phone
2- if you have access to xrec but don't have a backup, try to flash a new ROM
I tried the previous two steps but it kept saying can't mount SD, therfore try the following
3- if you don't have xrec access, use the flash tool
download from here http://www.multiupload.com/7H4JT35B6G
then flash generic 2.1 to your x10, I used this one http://www.mediafire.com/?sqv6274anzfzn2x
here is the guide on how to do it http://forum.xda-developers.com/showpost.php?p=10879528&postcount=3
I have had problem saying "install or re-install drivers", you just need to install the file in the drivers folder in the flash tool main folder and restart the flash tool program
4- after flashing this ROM, restart your phone and root it using the flash tool, after the root your phone will restart, then you need to ask for premession and click xrec to install xrec to your phone
5- before installing new ROM, please make sure that your baseband and karnel is compatible with it (because the ROM you flashed earlier has old karnel and you will be stuck again in the boot loop if you flashed 2.3.3 just like me, then you will need to start again and install new karnel before instaling 2.3.3 ROM or even restore 2.3.3 ROM)
(you can simply install the new ROM then restart in flash mode and flash the new karnel .71 or flash the karnel and restore your backup)
I know that my choices of flash tool version or generic 2.1 version might not be the best, but I used them and resolved my issue and hope it will resolve yours. for any question please do not hesitate to ask me.
credits to everyone who helped, I can't remember everyone because I read quite a lot so please forgive me
nice post my friend
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
it sounds to me that u may need to install the semc flash drivers.. inside the flashtool u may find a folder named drivers, go inside of that folder and install ggsetup.. also do u have pc companion installed?
tripico said:
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
Click to expand...
Click to collapse
can you post the log from the flash tool so I can see at which step exactly this massage came up
I am fairly novice when it comes to flashing so here's a pretty dumb question:
I have an X10a, can I use the X10i software that you've linked in your post or is it just going to brick my phone.

[Q] Flashing stock 7.006.03 fails

I'm having trouble flashing the stock rom vache has provided on the dev forum. (SD_Acer_A500_7.006.03_COM_GEN1.zip).
Downloaded fine, used the decrypt tool with key $12, Clear/wipe/format everything, and try to install with CWM.
Problem install aborts.
Can anyone help? I am assuming either the download is incorrect/incomplete, or the decrypt hasn't worked? Has anyone been successful with this rom?
chodkinson970 said:
I'm having trouble flashing the stock rom vache has provided on the dev forum. (SD_Acer_A500_7.006.03_COM_GEN1.zip).
Downloaded fine, used the decrypt tool with key $12, Clear/wipe/format everything, and try to install with CWM.
Problem install aborts.
Can anyone help? I am assuming either the download is incorrect/incomplete, or the decrypt hasn't worked? Has anyone been successful with this rom?
Click to expand...
Click to collapse
Did you download an official acer rom from vaches thread
is it a full rom or just an incremental update - better check!
yes it could be a bad d/l - where did u get it
If it didnt decrypt you can check by trying to open it in windows. You wont be able to 'open' (not extract....) the zip if it is still decrypted
did u extract the actual "update.zip" and flash that?
make sure the you havent named it "update.zip.zip"
how did u try and install with cwm
if u use flash zip choice u dont have to rename it to update.zip
u do if u pick flash update.zip
What rom are u currently running??
Many thanks for the help, it was me being a noob and not extracting the update.zip file.
thanks again

[Q] How to root Lenovo TAB A7-40 A3500-FL? [Solved] [GUIDE]

How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais
How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis
I got the same tablet and I also am looking for a root. :/
Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse
Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse
thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se
Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted

Categories

Resources