Related
I’m Using MIUI Now，and i want to flash cm9 on my defy，but I do not know how to do that. Anyone can help me? I have flashed cm7, is it the same with cm9?
this might help
http://forum.xda-developers.com/showthread.php?t=1364659
you should just use multi-Boot Keep your curent room and CM9
crlx1906 said:
http://forum.xda-developers.com/showthread.php?t=1364659
you should just use multi-Boot Keep your curent room and CM9
Click to expand...
Click to collapse
I have done as that, but now the problem is cm9 has no signal in this way
I'm have not tried to flash cm9 coming from miui.
I just did the usual way, wipe everything and then instal .zip from SD.
If you want to instal builds, newer than 111207 you need to flash 111207 first.
hope this helped, greetz Esok
edit: I also had problems with the net while using multiboot.
Newer builds 111207 cant be used with multiboot. But in my opinion 111211 is good enough to use everyday
Hi everyone. Im right now in Gb rooted android, and i want to try Ics.
Any suggestion of wich rom install? I looking for the best perfomance and not
so much useless things or ui things.
And other question, if a do now in gb, a cwm backup, can i restore later if
ics dont work well for me?
I must first back to my rom and kernel (one time i am in ics) to restore the cwm backup or if im on ics can i restore de gb backup??
Thanks in advance.
Clode said:
Hi everyone. Im right now in Gb rooted android, and i want to try Ics.
Any suggestion of wich rom install? I looking for the best perfomance and not
so much useless things or ui things.
And other question, if a do now in gb, a cwm backup, can i restore later if
ics dont work well for me?
I must first back to my rom and kernel (one time i am in ics) to restore the cwm backup or if im on ics can i restore de gb backup??
Thanks in advance.
Click to expand...
Click to collapse
To me i like lp9 ics. When in ics do not use the cmw to restore it will break your phone just flash the gb via pc odin if dont like the ics.
or u can try CM9 based roms like Asylum or ParanoidAndroid
If your in ics dont factory reset or recovery data wipe. Very important reminder.
Ok
zekurosu said:
or u can try CM9 based roms like Asylum or ParanoidAndroid
Click to expand...
Click to collapse
Ok, this roms dont have the brick problem inst it?
But still are ics, are so differents than other roms, has the s pen abilitties?
Thanks again.
Clode said:
Ok, this roms dont have the brick problem inst it?
But still are ics, are so differents than other roms, has the s pen abilitties?
Thanks again.
Click to expand...
Click to collapse
No they are based on CM9, so they are safe. But, flash them from GB or another CM9 rom, not ICS official roms.
They don't have s pen button abilities as that is samsung framework.
s pen
andreww88 said:
No they are based on CM9, so they are safe. But, flash them from GB or another CM9 rom, not ICS official roms.
They don't have s pen button abilities as that is samsung framework.
Click to expand...
Click to collapse
ok, but i really use s pen abilities, then i need to choose another rom...
then other advice of other rom?
thanks again, again, again...
Many people hardbreak their phone when they flash the paranoid rom while running in ics. Read carefully before flashing. As andrew88 said flash it in gb paranoid and cm9.
---------- Post added at 05:46 AM ---------- Previous post was at 05:42 AM ----------
I think all of custom rom do not use s pen abilities only stock ics.
Clode said:
ok, but i really use s pen abilities, then i need to choose another rom...
then other advice of other rom?
thanks again, again, again...
Click to expand...
Click to collapse
there are alot of substitute for S-pen apps such as freenote & catch ...
Ok i Will try some.. Thanks for the replays
zekurosu said:
there are alot of substitute for S-pen apps such as freenote & catch ...
Click to expand...
Click to collapse
But you still might not get the button functions. The button does in fact work in Papyrus though.
But, the button won't work in the ROM itself because its not Touchwiz.
andreww88 said:
But you still might not get the button functions. The button does in fact work in Papyrus though.
But, the button won't work in the ROM itself because its not Touchwiz.
Click to expand...
Click to collapse
thanks for the clearup ... im not an avid user of the s-pen by the way ..
i did install catch and freenote just to get a feel of it but the apps dont stay long in my note
imo paranoid is the best looking rom but some apps dont run with it so i come back to official lpy with speedmod kernel it is good too.
Clode said:
Hi everyone. Im right now in Gb rooted android, and i want to try Ics.
Any suggestion of wich rom install? I looking for the best perfomance and not
so much useless things or ui things.
And other question, if a do now in gb, a cwm backup, can i restore later if
ics dont work well for me?
I must first back to my rom and kernel (one time i am in ics) to restore the cwm backup or if im on ics can i restore de gb backup??
Thanks in advance.
Click to expand...
Click to collapse
Hi m8,
Try Kingdroid 3.0+ SGS 3 mod
install:
IN GB ROM go to CWM recovery and do a cache wipe, dalvik cache wipe and factory reset then install kingdriod from d card and insall sgs 3 mod from sd card .. reboot then install speedmod 3.3 ics kernel from moile odin! (you have to extract the zImage from the zip!)
cheers
mR.fR34ky said:
Hi m8,
Try Kingdroid 3.0+ SGS 3 mod
install:
IN GB ROM go to CWM recovery and do a cache wipe, dalvik cache wipe and factory reset then install kingdriod from d card and insall sgs 3 mod from sd card .. reboot then install speedmod 3.3 ics kernel from moile odin! (you have to extract the zImage from the zip!)
cheers
Click to expand...
Click to collapse
Hi Mr.
Kingdroid has the s pen Samsung apps? Or abilities?? Like double click to make a Screen capture??
Sent from my GT-N7000 using XDA
Clode said:
ok, but i really use s pen abilities, then i need to choose another rom...
then other advice of other rom?
thanks again, again, again...
Click to expand...
Click to collapse
I'm using CleaNote 1.02, very easy to install if you are already rooted and have CWM recovery. Just copy the zip file to the sdcard and flash it from CWM recovery.
It's ICS LQ3 with speedmod K3-3 kernel (safe). Everything works, and you have all Samsung apps (although I disabled most of them).
vcespon said:
I'm using CleaNote 1.02, very easy to install if you are already rooted and have CWM recovery. Just copy the zip file to the sdcard and flash it from CWM recovery.
It's ICS LQ3 with speedmod K3-3 kernel (safe). Everything works, and you have all Samsung apps (although I disabled most of them).
Click to expand...
Click to collapse
Ok i Will see that rom...
Whats mean LQ3??? Is the versión of ics?
Sent from my GT-N7000 using XDA
Hello,
How are you?
I am a bit tired of Touchwiz and some lag on the phone, so I would like to switch ROMS.
So, I was wondering what is the most pure vanilla ICS 4.0.4 ROM for the Note, wich is stable and has the fewest know issues?
I am sorry for this thread, but there are so many roms developed that it is really hard to choose.
CHeers and thanks!
gdourado said:
Hello,
How are you?
I am a bit tired of Touchwiz and some lag on the phone, so I would like to switch ROMS.
So, I was wondering what is the most pure vanilla ICS 4.0.4 ROM for the Note, wich is stable and has the fewest know issues?
I am sorry for this thread, but there are so many roms developed that it is really hard to choose.
CHeers and thanks!
Click to expand...
Click to collapse
Well, Paranoid Android is a fantastic ROM for the Samsung Galaxy Note, as it offers a near-ICS experience that allows for both tablet and phone modes. Try it out!
Brad387 said:
Well, Paranoid Android is a fantastic ROM for the Samsung Galaxy Note, as it offers a near-ICS experience that allows for both tablet and phone modes. Try it out!
Click to expand...
Click to collapse
Thank you for the suggestion.
Do I need to flash a modded kernel for that rom?
Or does it work stable and fast with stock GB kernel?
Cheers!
gdourado said:
Thank you for the suggestion.
Do I need to flash a modded kernel for that rom?
Or does it work stable and fast with stock GB kernel?
Cheers!
Click to expand...
Click to collapse
For an ICS ROM you need to use an ICS kernel. But Paranoid comes packaged with the kernel. By the sound of it you are on GB at the moment. If it's already rooted, do a full wipe then flash Paranoid and the GApps package from the same thread.
If you are already on ICS, do not do full wipe until you have read up on how to do it.
Sent from my GT-N7000 using xda premium
gdourado said:
Hello,
How are you?
I am a bit tired of Touchwiz and some lag on the phone, so I would like to switch ROMS.
So, I was wondering what is the most pure vanilla ICS 4.0.4 ROM for the Note, wich is stable and has the fewest know issues?
I am sorry for this thread, but there are so many roms developed that it is really hard to choose.
CHeers and thanks!
Click to expand...
Click to collapse
CM9 is what you're looking for my friend ,try the latest nightly and you won't be disappointed.
http://forum.xda-developers.com/showthread.php?t=1627854
MR.change said:
CM9 is what you're looking for my friend ,try the latest nightly and you won't be disappointed.
http://forum.xda-developers.com/showthread.php?t=1627854
Click to expand...
Click to collapse
Any downsides to this ROM?
I am currently on stock Note, with ICS 4.0.3 and stock kernel. Not rooted.
Would a kernel like Speedmod work better with the nightly rom? Or is a stock GB kernel better?
Whichever rom I choose, I need to use PC Odin to revert to GB before flashing anything, right?
Cheers and thanks!
Why would anyone use cm9 If Paranoid Android is the same with much more features..
You cant use any tw kernels like speedmod. Cm9 need cm9 kernels
can i install Paranoid Android from ICS through Abyss 4.2 kernel ?
i want the safe steps to install ...........
dawids2k8 said:
Why would anyone use cm9 If Paranoid Android is the same with much more features..
You cant use any tw kernels like speedmod. Cm9 need cm9 kernels
Click to expand...
Click to collapse
So I cannot use modded kernels with Paranoid?
So the best way would be PC Odin to stock GB, full wipe then install Paranoid?
Would that give the best performance?
Cheers!
You can install it from ics if you want.
download Abyss Kernel 4.2
copy Kernel and PA Rom and Gapps Files to your internal SDCard
boot into Recovery
Flash Abyss Kernel 4.2
boot back in Recovery (to find under "advanced")
Factory Reset
Wipe Dalvik Cache (under "advanced")
Flash PA Rom
Flash GAPPS
reboot system
gdourado said:
So I cannot use modded kernels with Paranoid?
So the best way would be PC Odin to stock GB, full wipe then install Paranoid?
Would that give the best performance?
Cheers!
Click to expand...
Click to collapse
You can use modded kernels with PA, but only cm based ones like AniDroid/bbq etc.. and not the touchwiz ones like speedmod/franco.
To install, follow what the post above says, or as you mentioned use Odin to go back to gb, root/install cwm, full wipe then install Paranoid Android.
gdourado said:
Any downsides to this ROM?
I am currently on stock Note, with ICS 4.0.3 and stock kernel. Not rooted.
Would a kernel like Speedmod work better with the nightly rom? Or is a stock GB kernel better?
Whichever rom I choose, I need to use PC Odin to revert to GB before flashing anything, right?
Cheers and thanks!
Click to expand...
Click to collapse
As stated above cm9 only uses cm9 based kernel, you don't have to worry about that, it will install itself when you flash the ROM.
dawids2k8 said:
Why would anyone use cm9 If Paranoid Android is the same with much more features..
You cant use any tw kernels like speedmod. Cm9 need cm9 kernels
Click to expand...
Click to collapse
Because not everyone like tablet mod, I've tried PA but returned to cm9 because the phone UI is more suitable for the note .
And then there is the faster update cycle of cm9.
MR.change said:
As stated above cm9 only uses cm9 based kernel, you don't have to worry about that, it will install itself when you flash the ROM.
Because not everyone like tablet mod, I've tried PA but returned to cm9 because the phone UI is more suitable for the note .
And then there is the faster update cycle of cm9.
Click to expand...
Click to collapse
So if I go with CM9 nightly it will also install the kernel when i flash the Rom?
Cheers
Sent from my GT-N7000 using xda premium
Just my two cents: I found PA to be super buggy in comparison to CM9, the boot splash didn't fit the screen and the UI lagged a lot more, some of the apps were great in tablet mode, but CM9 feels overall far more suited to the Note.
Sent from my GT-N7000 using xda app-developers app
dawids2k8 said:
You can install it from ics if you want.
download Abyss Kernel 4.2
copy Kernel and PA Rom and Gapps Files to your internal SDCard
boot into Recovery
Flash Abyss Kernel 4.2
boot back in Recovery (to find under "advanced")
Factory Reset
Wipe Dalvik Cache (under "advanced")
Flash PA Rom
Flash GAPPS
reboot system
Click to expand...
Click to collapse
working great .. thanks alot
If I install a custom Rom, either PA or CM9, can the note be reverted back to full stock? Recovery, kernel and Rom?
I am on stock is 4.0.3. What's the best procedure to install CM9 nightly?
Cheers
Sent from my GT-N7000 using xda premium
gdourado said:
If I install a custom Rom, either PA or CM9, can the note be reverted back to full stock? Recovery, kernel and Rom?
I am on stock is 4.0.3. What's the best procedure to install CM9 nightly?
Cheers
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Don't be that lazy read the post above yours
It got the steps .. but make sure u root ur stock rom first
Sent from my Egyptian Galaxy Note - KingDroid v5.1 - NoteCore v4
vegetables said:
Don't be that lazy read the post above yours
It got the steps .. but make sure u root ur stock rom first
Sent from my Egyptian Galaxy Note - KingDroid v5.1 - NoteCore v4
Click to expand...
Click to collapse
If you want a true Vanilla experience install the 4.04 Stock Rom, you will find the there are now a lot of people using it, it is stable, fast and the battery life has improved. There is a large difference between 4.03 and 4.04 official ROMS.
I have been using it since it came out and I find that it beats everything else I have tried. On the down side the 4.04 kernel still contains the EMMC Bug so I cannot do a full wipe without reverting back to GB.
Roy_W said:
If you want a true Vanilla experience install the 4.04 Stock Rom, you will find the there are now a lot of people using it, it is stable, fast and the battery life has improved. There is a large difference between 4.03 and 4.04 official ROMS.
I have been using it since it came out and I find that it beats everything else I have tried. On the down side the 4.04 kernel still contains the EMMC Bug so I cannot do a full wipe without reverting back to GB.
Click to expand...
Click to collapse
I have tried both .. KingDroid 5.1 which is based on 4.0.4 and AOSP like Paranoid Android
And what I felt is that AOSP is way smoother and faster than stock roms
Sent from my Egyptian Galaxy Note - Paranoid Android v0.5
vegetables said:
Don't be that lazy read the post above yours
It got the steps .. but make sure u root ur stock rom first
Sent from my Egyptian Galaxy Note - KingDroid v5.1 - NoteCore v4
Click to expand...
Click to collapse
Hi.
My note is rooted. Thwart Rom is stock ics 4.0.3.
I already downloaded the abyss kernel and the cm9 Rom and places them on my internal sd. If i reboot to recovery, i cannot fond the options stated. Can you help me out please?
Cheers
Sent from my GT-N7000 using xda premium
Hello, so I am new user of Huawei U8800 and I succeded to install Aurora ICS on it, but now I would like to try CM7. But I don't know how to get back to Froyo and then from Froyo to CM7 (as it says in CM7 install instructions?
Thanks for help.
Just format system and data and install over it.
Sent from my Desire HD using xda premium
SEK610i said:
Hello, so I am new user of Huawei U8800 and I succeded to install Aurora ICS on it, but now I would like to try CM7. But I don't know how to get back to Froyo and then from Froyo to CM7 (as it says in CM7 install instructions?
Thanks for help.
Click to expand...
Click to collapse
If you want to install CM7 (.32) you need to downgrade to froyo but if you want (.35) you can install it over Aurora.
Sorry but can I ask why to revert back to froyo from Aurora?
Somcom3X said:
Just format system and data and install over it.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
That would not work.
Find official froyo
Unzip it and put into your sdcard like /dload/update.app
Close your phone.
Press vol+ vol- and power and keep until update screen.
After the successful froyo downgrade root it.
Copy cwm
Install cm7.
That simple.
Sent from my U8800
entrapmen said:
That would not work.
Find official froyo
Unzip it and put into your sdcard like /dload/update.app
Close your phone.
Press vol+ vol- and power and keep until update screen.
After the successful froyo downgrade root it.
Copy cwm
Install cm7.
That simple.
Sent from my U8800
Click to expand...
Click to collapse
This only need for Cm7.32
If you want to CM7.35, just install on top aurora with full wipe
Mahdial said:
If you want to install CM7 (.32) you need to downgrade to froyo but if you want (.35) you can install it over Aurora.
Sorry but can I ask why to revert back to froyo from Aurora?
Click to expand...
Click to collapse
I won't downgrade to Froyo, I just wan't to try CM7, and in CM7 install instructions downgrading to Froyo is mentioned, so I tought I will have to downgrade to Froyo and then install Cm7.
Thanks for all answers, will try installing CM7 35 right now.
EDIT:Can someone link me to CM7 .35 thread?
Sent from my U8800 using Tapatalk 2
There are atleast three dev topics in the forum. One from genokolar and if i am not wrong there is a kernel dev for ezet's cm7.2 .32 by Paul*.
But... All of them are onhold or ended dev. And they all have bugs. So. What i am trying to say is if you want bug free cm7 then you should try ezet's .32
Sent from my U8800
entrapmen said:
There are atleast three dev topics in the forum. One from genokolar and if i am not wrong there is a kernel dev for ezet's cm7.2 .32 by Paul*.
But... All of them are onhold or ended dev. And they all have bugs. So. What i am trying to say is if you want bug free cm7 then you should try ezet's .32
Sent from my U8800
Click to expand...
Click to collapse
Installed .32 yesterday, and I am really happy with it. Thanks everone for helping me. :good:
SEK610i said:
Installed .32 yesterday, and I am really happy with it. Thanks everone for helping me. :good:
Click to expand...
Click to collapse
What's the main differences between Aurora and CM7.2 in your opinion?
Cause I want to go to Aurora though.
Mahdial said:
What's the main differences between Aurora and CM7.2 in your opinion?
Cause I want to go to Aurora though.
Click to expand...
Click to collapse
Sorry, for late answer...I didn't see any major differences...actualy I was more pleased with aurora, but I always got atleast 2 reboots a day on Aurora, so thah is the reason I tried CM7.
Now I have one more question...How do I get to stock GB now? I changed recovery.img when I was installing CM7, so do I need to change recovery.img to stock, and then "update" with official GB, or can I just directly "update" to official GB without changing recovery.img to stock before?
Thanks for your help
SEK610i said:
Sorry, for late answer...I didn't see any major differences...actualy I was more pleased with aurora, but I always got atleast 2 reboots a day on Aurora, so thah is the reason I tried CM7.
Now I have one more question...How do I get to stock GB now? I changed recovery.img when I was installing CM7, so do I need to change recovery.img to stock, and then "update" with official GB, or can I just directly "update" to official GB without changing recovery.img to stock before?
Thanks for your help
Click to expand...
Click to collapse
Update with dload folder of the GB, it will give you the stock recovery after completed the update.
Sent from my U8800 using xda app-developers app
Hi, Can I ask something? Now, I'm using NexusHD2-ICS-CM9-HWA V2.4 and planning to upgrade to NexusHD2-ICS-CM9-HWA V2.9a. My question is should I do fresh install by wipe data/factory reset and wipe cache partition OR wipe dalvik cache only and proceed with installing zip file?
Hope I can get answer to this
ueki14 said:
Hi, Can I ask something? Now, I'm using NexusHD2-ICS-CM9-HWA V2.4 and planning to upgrade to NexusHD2-ICS-CM9-HWA V2.9a. My question is should I do fresh install by wipe data/factory reset and wipe cache partition OR wipe dalvik cache only and proceed with installing zip file?
Hope I can get answer to this
Click to expand...
Click to collapse
From post #3: Fresh install recommended!
shanman-2 said:
From post #3: Fresh install recommended!
Click to expand...
Click to collapse
Which One Do You Prefer? Should I install NexusHD2-ICS-CM9-HWA V2.9a OR NexusHD2-JellyBean-CM10 V1.4a? I'm looking for the stable,fastest and doesn't give any problem to my phone?
Any suggestion? Thanks
ueki14 said:
Which One Do You Prefer? Should I install NexusHD2-ICS-CM9-HWA V2.9a OR NexusHD2-JellyBean-CM10 V1.4a? I'm looking for the stable,fastest and doesn't give any problem to my phone?
Any suggestion? Thanks
Click to expand...
Click to collapse
ICS V2.9a has all the android features working, but tytung's JB both 4.1.2 and 4.2.2 have some features not working like tethering...etc (refer respective ROM threads)
Stable,...above ROMs are stable.
Don't ask for the fastest and problem free ROM....as performance differs from one phone to another.
(For me, both ICS and JB are fast but JB is far more smooth).
And if you don't wanna give your phone any problem stay with the stock WinMo ROM. As flashing custom ROMs always has a bit of risks involved.
Sent from my T-Mobile HTC HD2 using XDA Premium.
sonalikagaur said:
ICS V2.9a has all the android features working, but tytung's JB both 4.1.2 and 4.2.2 have some features not working like tethering...etc (refer respective ROM threads)
Stable,...above ROMs are stable.
Don't ask for the fastest and problem free ROM....as performance differs from one phone to another.
(For me, both ICS and JB are fast but JB is far more smooth).
And if you don't wanna give your phone any problem stay with the stock WinMo ROM. As flashing custom ROMs always has a bit of risks involved.
Sent from my T-Mobile HTC HD2 using XDA Premium.
Click to expand...
Click to collapse
Thanks for the info
ueki14 said:
Which One Do You Prefer? Should I install NexusHD2-ICS-CM9-HWA V2.9a OR NexusHD2-JellyBean-CM10 V1.4a? I'm looking for the stable,fastest and doesn't give any problem to my phone?
Any suggestion? Thanks
Click to expand...
Click to collapse
I use NeusHD2-JellyBean v1.4a and have no problems with it.