Hey guys, just yesterday i recieved my LG Nexus 4, and i inserted my sim card, which i had cut to fit in the micro sim tray(with a micro sim cutter). The problem is that the phone can't recognize it. It says "No Sim Card". I tried other sims too but still the same. When i try with an AT&T sim however, the phone can recognize it. I know you are gonna say it's locked. But it's factory unlocked, straight from google. I also tried to unlock it in case it was really locked, but this "secret" code: 2945#*960#, doesn't seem to working. Any help?
Thanks in advance.
I had the same issue too when I cut a T-Mobile sim. What I did to solve the issue is I looked at the back of the att sim where the gold plate is. I noticed three lines scratched on from where the phones contact pins touch the gold plate. I then looked at the cut up T-Mobile sim and noticed it only had 2 lines scratched on it. Meaning a third pin was not touching the gold plate leading to no service. What I did was try to file the sim even more and made sure the gold plate on the cut up sim was in the same place as the att's plate. Also look at where the att's plate is while in the sim tray to get an idea of where the contact pins are. I ended up having an even smaller sim and had to cut a piece of an extra sim and placing it in the tray so the sim wouldn't slide around when in the phone. Never had an issue since.
Hope this helps.
dougiefresh36 said:
I had the same issue too when I cut a T-Mobile sim. What I did to solve the issue is I looked at the back of the att sim where the gold plate is. I noticed three lines scratched on from where the phones contact pins touch the gold plate. I then looked at the cut up T-Mobile sim and noticed it only had 2 lines scratched on it. Meaning a third pin was not touching the gold plate leading to no service. What I did was try to file the sim even more and made sure the gold plate on the cut up sim was in the same place as the att's plate. Also look at where the att's plate is while in the sim tray to get an idea of where the contact pins are. I ended up having an even smaller sim and had to cut a piece of an extra sim and placing it in the tray so the sim wouldn't slide around when in the phone. Never had an issue since.
Hope this helps.
Click to expand...
Click to collapse
Hmm... the problem is that the sims are working fine in other phones, like iPhone or HTC. Only with the nexus, the sims don't work.
You screwed the sim card when u cut it.
Sent from my Nexus 4 using xda premium
yogeshmha said:
You screwed the sim card when u cut it.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Actually not. Because with iPhone and other phones, the sim is working 100%
~STiX~ said:
Hey guys, just yesterday i recieved my LG Nexus 4, and i inserted my sim card, which i had cut to fit in the micro sim tray(with a micro sim cutter). The problem is that the phone can't recognize it. It says "No Sim Card". I tried other sims too but still the same. When i try with an AT&T sim however, the phone can recognize it. I know you are gonna say it's locked. But it's factory unlocked, straight from google. I also tried to unlock it in case it was really locked, but this "secret" code: 2945#*960#, doesn't seem to working. Any help?
Thanks in advance.
Click to expand...
Click to collapse
How long do you leave the sims in the phone for? ANd do you restart the phone I guess after you swapped the sim? When switching sims for me it takes a good minute or two to recognise the sim card for me. The iphone was pretty quick at recognising a new sim.
~STiX~ said:
Actually not. Because with iPhone and other phones, the sim is working 100%
Click to expand...
Click to collapse
But it's not cut well enough to work with the N4. Others have had this same problem. Maybe the N4 is just more demanding of the exact placement of the SIM chip?
Sent from my Nexus 4
dddennizzz said:
How long do you leave the sims in the phone for? ANd do you restart the phone I guess after you swapped the sim? When switching sims for me it takes a good minute or two to recognise the sim card for me. The iphone was pretty quick at recognising a new sim.
Click to expand...
Click to collapse
hmm well, to be honest to make the AT&T sim to work with the phone, first i turn off the phone then insert the sim and turn it on again. But for some reason that doesn't work with other sims even when letting the phone for minutes to recognize the sim(s).
steviewevie said:
But it's not cut well enough to work with the N4. Others have had this same problem. Maybe the N4 is just more demanding of the exact placement of the SIM chip?
Sent from my Nexus 4
Click to expand...
Click to collapse
Hmm that's a good theory i guess, i will go tomorrow to my provider to ask for a new one and will keep you inform
Tape
This could solve your issue:
Zttp://blog.lazut.in/2013/10/nexus-4-sim-card-problems.html
(I typed Z instead of h in http due to this forum limitations for users with less than 10 posts, just type it correctly)
Probably the contacts are touching somewhere the frame and are being short circuited.
Yust apply a bit of tape.
diciassei said:
This could solve your issue:
Zttp://blog.lazut.in/2013/10/nexus-4-sim-card-problems.html
(I typed Z instead of h in http due to this forum limitations for users with less than 10 posts, just type it correctly)
Probably the contacts are touching somewhere the frame and are being short circuited.
Yust apply a bit of tape.
Click to expand...
Click to collapse
That worked for me. Saved me so much frustration. Thanks much.
Related
So, I have the xperia play on Verizon. It most definitely does have a slot for a SIM card, just underneath the sd card slot. There is a piece of plastic glued in place over it blocking its use. Anybody know what its use is for? If this phone was unlocked, could it be a world phone? Anybody know anything yet?
Thanks.
Maybe it's just that they use the same housing as for the normal version but there is no working electronics.
ace518 said:
So, I have the xperia play on Verizon. It most definitely does have a slot for a SIM card, just underneath the sd card slot. There is a piece of plastic glued in place over it blocking its use. Anybody know what its use is for? If this phone was unlocked, could it be a world phone? Anybody know anything yet?
Thanks.
Click to expand...
Click to collapse
Well go ahead and take that little piece of plastic off and try a Sim card, it has to be for a Sim cause that's what mine has, the Sim right under the sd card
Sent from my R800i using XDA App
just checked, must be disabled in the firmware cuz it has the pins to use it, but doesn't register anything when i put a sim card in it.
Sent from my Transformer TF101 using Tapatalk
thorpe24 said:
just checked, must be disabled in the firmware cuz it has the pins to use it, but doesn't register anything when i put a sim card in it.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
you should try flashing a generic rom like http://forum.xda-developers.com/showthread.php?t=1097591
maybe it'll enable gsm?
protozoa said:
you should try flashing a generic rom like http://forum.xda-developers.com/showthread.php?t=1097591
maybe it'll enable gsm?
Click to expand...
Click to collapse
Well, if we can load a generic firmware, we might get it activated. Then we could get an EMEI number to unlock the bootloader. In the mean time... bootloader is still locked so we can't flash nothing on it.
also if you look at the back there is a black sticker to the right of the cam it looks like the same conector that the thunderbolt uses to connect to the batty cover for its 4g signal could it be able to upgrade to 4g with the sim slot and the external conector
update: pulled off the sticker more i was wrong its the vibrate motor it looked like a connector with the tape half off
Received my Z1 today got it fully charged up went to insert a sim card pulled the tray it got stuck a little and when I pulled the tray out I noticed a broken prong came out with the tray an the phone won't read a sim card...great...
Sent from my XT1058 using XDA Premium 4 mobile app
ajbattaglia83 said:
Received my Z1 today got it fully charged up went to insert a sim card pulled the tray it got stuck a little and when I pulled the tray out I noticed a broken prong came out with the tray an the phone won't read a sim card...great...
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wow, thats gotta hurt
Devastating
Sent from my C6903 using XDA Premium 4 mobile app
The tray does come out all the way FYI.
Yea it felt like when I pulled the tray out it was stuck on a prong and pulled it out as well
Sent from my C6903 using XDA Premium 4 mobile app
Thought mine broke off at first too. Went back in fine though.
Same thing happened to me! I just emailed Sony to see what we can do about it. Maybe they have a repair department. It might be a widespread issue/ design flaw.
[email protected] said:
Same thing happened to me! I just emailed Sony to see what we can do about it. Maybe they have a repair department. It might be a widespread issue/ design flaw.
Click to expand...
Click to collapse
I think its supossed to come out all the way.
---------- Post added at 03:05 PM ---------- Previous post was at 02:56 PM ----------
http://userguide.sonymobile.com/referrer.php?region=gb&product=xperia-z1#!Assembly.html
Skimmed the instructions in above link.
"Using a fingernail, pull out the micro SIM card holder.
Place the micro SIM card on the holder, with the gold-coloured contacts on the micro SIM card facing up.
Insert the micro SIM card holder back into the device. "
What got me was their word of caution "Inserting the micro SIM card into the device without the SIM card holder could damage your micro SIM card or your device, and Sony Mobile does not warrant and will not be responsible for any damage caused by such action."
How could you put the sim card in without the sim card holder without taking it out completely. If I did break it, Oh well, it works just fine when I put it back into the phone with the tray.
TO THE OP: Try a new sim and/or APN settings
got my z1 yesterday brock the prongs in the phone sim slot so same thing had to go though the insurance as cpw would not replace it so not used it yet being replaced tomorrow my fault.so told cpw this is going to be a problem now iam not the only one thats done dont feel a complet twat now
Video for Xperia Z, (Precursor to Z1) has the same design.
I'm pretty positive it is supposed to come out.
http://www.youtube.com/watch?feature=player_embedded&v=9vL0jzvUjxc#t=77
My tray got stuck also, I didn't removed it, I just insered the sim card without removing the tray, it works but I guess I have the issue too...
Z1 sim card issue
Hi, I also have a problem with sim card slot. I was wondering if it is possible to replace just the sim card slot (not the whole motherboard)?
Vela001 said:
Hi, I also have a problem with sim card slot. I was wondering if it is possible to replace just the sim card slot (not the whole motherboard)?
Click to expand...
Click to collapse
Just send ti back to Sony via warranty. They will decide what to do.
---------- Post added at 01:18 AM ---------- Previous post was at 01:16 AM ----------
ajbattaglia83 said:
Received my Z1 today got it fully charged up went to insert a sim card pulled the tray it got stuck a little and when I pulled the tray out I noticed a broken prong came out with the tray an the phone won't read a sim card...great...
Click to expand...
Click to collapse
In your case I will sent it back to Sony saying the sim do not work. They will repair the phone under warranty.
eclyptos said:
In your case I will sent it back to Sony saying the sim do not work. They will repair the phone under warranty.
Click to expand...
Click to collapse
Don't worry, OP was from Sept '13. @Vela001 is just necromancing.
I am currently in the process of replacing my sim card holder internals, it is a bad design and quite fragile, ordered the part online still waiting for it to arrive, had to improvise in the mean time with a soldering iron
xasbo said:
Don't worry, OP was from Sept '13. @Vela001 is just necromancing.
Click to expand...
Click to collapse
Ok, I just take the opportunity to answer at both.
Geoffxx said:
I am currently in the process of replacing my sim card holder internals, it is a bad design and quite fragile, ordered the part online still waiting for it to arrive, had to improvise in the mean time with a soldering iron
Click to expand...
Click to collapse
Did you take photos? It would be nice to document the repair process.
XPERIA z1 sim card slot broken
Hey....
I have the same issue with my XPERIA Z1...:crying:
Did you get the solution for yours???
Looks like I have the same issue, and now I have a totally stuck sim tray (I had stupidly put a micro to mini sim adapter in the tray empty, which I think caught the leads even more).
I have no idea how to get it out now. Any forcing will probably totally break it (if it isn't broken already).
Wow what a stupid design.
(Any thoughts on how I can get this out? Can I open up the whole device?)
fuzzycuffs said:
Looks like I have the same issue, and now I have a totally stuck sim tray (I had stupidly put a micro to mini sim adapter in the tray empty, which I think caught the leads even more).
I have no idea how to get it out now. Any forcing will probably totally break it (if it isn't broken already).
Wow what a stupid design.
(Any thoughts on how I can get this out? Can I open up the whole device?)
Click to expand...
Click to collapse
you will be very lucky not to have bent the sim tray contacts - the damage will have been done going in not out, you will have to use a little force to remove what you have stuck in there - fingers cross the contact pins are still intact though I doubt it
The sim holder can be bought on ebay for about $5 and it can be resoldered into place, removal of the mother board will be required which is about a 1/3 disassembly - back cover off - plastic frame removed 8 screws - battery out - all connectors and camera removed - MB removed - replace sim holder, you can basically forget about the waterproof after all that - but you will have a fully working Z1 - you can buy all the seals on ebay - back cover is all you need and it is important because it protects the camera from flash bleed
I have been using my S4 with a nano sim in a micro sim card adapter. Last night I went to take it out and it messed up the sim slot. The little prongs are sticking out. I can't insert anything into the sim slot. I am beyond upset about this. I have always been super careful when inserting and removing my sim. It actually almost damaged my sim coming out. I've had it with pretty much everything about the S4. Locked bootloader, bad development support, bricked devices, ect...
So now it has to be sent in for repair. Ok, no bid deal, right? Wrong! Now I'm going to loose my MDL firmware and custom recovery. I restored the phone to stock MDL, but I am sure Samsung will update to their latest knox crap and Android 4.3. Ugh. I don't think I ever want to buy another Samsung phone again!
Any other options, I'd be very grateful.
Merry Christmas!
Sell it, but an nexus 5
jd1639 said:
Sell it, but an nexus 5
Click to expand...
Click to collapse
Yeah, I was thinking of that. Only thing is, the Nexus 5 has inferior hardware. I heard the camera sucks, and the screen is bad.
MattMJB0188 said:
Yeah, I was thinking of that. Only thing is, the Nexus 5 has inferior hardware. I heard the camera sucks, and the screen is bad.
Click to expand...
Click to collapse
You heard wrong, I'm loving it
I'll have to see. Just tried inserting my sim and now it won't even read it at all. Anyone know if this is something Samsung repairs?
Won't a T-Mobile phone unlocked work with at&t??
thatsupnow said:
Won't a T-Mobile phone unlocked work with at&t??
Click to expand...
Click to collapse
Yes, but that's besides the point.
The sim / micro SD slot is modular. One flex cable and a little double sided tape is all that holds it on. Buy one on eBay and switch it out yourself real easy to do
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
scanss2k said:
The sim / micro SD slot is modular. One flex cable and a little double sided tape is all that holds it on. Buy one on eBay and switch it out yourself real easy to do
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yea, I'm actually going to look into fixing it myself. I just don't want to ship it to Samsung and have them mess up my phone and give me Android 4.3.
Shouldn't cost a lot. I paid $8 for the one I used to repair an s4. Guy had put a micro SD into the sim slot and tore it up. Took me 10 minutes to do the repair. Few screws to get the midframe off. Popped the flex cable and slid a metal spudger under the tray and it came off easily. Put the new one in the same spot and worked perfect
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
MattMJB0188 said:
Yea, I'm actually going to look into fixing it myself. I just don't want to ship it to Samsung and have them mess up my phone and give me Android 4.3.
Click to expand...
Click to collapse
Its easy to replace it, buy it on ebay for under $10 and just search on youtube on how to do it..i had to do this to my m919. Took me 10 mins.
Sent from my GT-I9505G using Tapatalk 2
euklid said:
Its easy to replace it, buy it on ebay for under $10 and just search on youtube on how to do it..i had to do this to my m919. Took me 10 mins.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Sure it can be fixed. But does that mean the Galaxy S4 slim slots are just garbage in general? I like to switch back and forth between my iPhone and Gs4. Iphone 5S takes nano sim, so I use micro sim adapter. I'm hoping that didn't f it up.
SD Card reader replacement fail... twice
I have replaced the SIM/SD reader on my i337 twice now (2 different new parts), and since the original problem (phone started randomly reporting "SD card removed") I Have never gotten the phone to recognize any of the 3 SD cards I have inserted. All of the test SD cards have been FAT32 and are recognized by other phones and PC via USB readers. Also, this phone will read the same SD cards successfully if mounted via USB on the go connector/adapter, so I believe the cards are good and their filesystems are readable by my kernel. Through all this, the SIM reader has always worked fine.
I think it might be time to get a new phone...
Hi All,
I got all to excited about getting a G2 and inserted the sim card without the tray.
Every works as expected but I want to take the sim card out and properly inserted with the tray.
Does anyone have any suggestion on how one would take the card out?
Thank you!
Tweezers could possibly work.
Sent from my LG-D801 using xda app-developers app
Screen protector
ghdtpdna said:
Hi All,
I got all to excited about getting a G2 and inserted the sim card without the tray.
Every works as expected but I want to take the sim card out and properly inserted with the tray.
Does anyone have any suggestion on how one would take the card out?
Thank you!
Click to expand...
Click to collapse
Cut a screen protector stripe narrower than the sim card insert it in the sim card tray by pressing gently just make sure the adhesive side stick on the sim and not on the tray then pull it out
Take it to a repair shop. They could probably sort it in 5 minutes and it should not cost much.
Sent from my LG-D802 using Tapatalk
I just did this in a moment of stupidity. In the end I used the sim removal tool within the slot to work the sim out just enough to get a fingernail on and pull it out.
Hope this helps someone else in future.
SAMSUNG SIM SLOT BROKEN
How can Samsung use some CHEAP PLASTIC on this expensive flagship?
Some other manufacturers are using metal and Samsung came up with the idea of using CHEAP PLASTIC.
I just bought this device and have lot of issues with it, the device overheat even after downloading all available updates.
Please guy take note when replacing your sim on your device to avoid breaking the CHEAP PLASTIC.
STILL WAITING FOR SAMSUNG CARE TO GIVE ME FEEDBACK ON THE COST OF REPLACEMENT. I GUESS THIS WILL BE MY LAST SAMSUNG DEVICE.
Yeah when I saw it was made out of plastic, I wondered why. The iPhone 4 had it out of metal, they should have made it out of metal as well.
Chill dude, its just the sim tray. Slap a case on it and you're are golden.
True that. How often do you take your sim out and put it back in? Its a smartphone, you will have to handle it with care often or else if your usage is that rough, ask the mobile shop owner to get it fully setup for you, put an otterbox and then chill out a bit!
okolobaccess said:
Please guy take note when replacing your sim on your device to avoid breaking the CHEAP PLASTIC.
Click to expand...
Click to collapse
What happened, did you put in the wrong way?
CafeKampuchia said:
What happened, did you put in the wrong way?
Click to expand...
Click to collapse
I didnt, i have pin which came with the phone.
hmmm Imagine you probably could head on down to a local phone place and say hey I broke my sim tray can I get a replacement tray its an s6 edge. but seriously what you do with that I mean it doesn't exactly require force for you lay the sim down in the one and only way it will fit and push it into the phone in its slot..... seriuosly not exactly something you should be applying any significant force too. and even if it was made of metal Id emagine it would Bend under the same amount of pressure you used to break ot break the plastic one, thus inabling it just as useless.
Changed my sim card twice now not noticed any issues with the tray so far.
CafeKampuchia said:
What happened, did you put in the wrong way?
Click to expand...
Click to collapse
So what happened then? How did it break, so others can avoid that in the future.
I already open the sim tray 5times and nothing to report for me it's been great of course you have to be careful
I didn't apply force to it and this isn't my first time in using smartphone.
Samsung made use of cheap plastic on such an expensive device. Why not use metal ?
Just order a metal sim tray on eBay there super cheap
Sent from my SM-G920W8
ex-28 said:
Just order a metal sim tray on eBay there super cheap
Sent from my SM-G920W8
Click to expand...
Click to collapse
For really?
Will it work for the S6 edge?
Should be the same search galaxy s6 metal sim tray
Sent from my SM-G920W8
ex-28 said:
Should be the same search galaxy s6 metal sim tray
Sent from my SM-G920W8
Click to expand...
Click to collapse
No luck. Will take the phone samsung care by monday to see if dey can help me out and get me a metal sim tray replacement
http://m.ebay.com/itm/261859235725?nav=SEARCH
Sent from my SM-G920W8
Plastic if forced breaks, saves phone from damage. Metal if forced bends, possibly causing internal damage to the phone. Both would be strong enough that if your using them correctly they would not bend of break.
The only way i could see you breaking it is putting it in and accidently pushing up or down and breaking the end off but instead of taking responsibility for it you blame the company. They saved money in using a cheaper material in something that will not be used very much in an average persons life. If called business and a business cannot spend too much money on one thing.
Sent from my SM-G925P using Tapatalk
okolobaccess said:
SAMSUNG SIM SLOT BROKEN
How can Samsung use some CHEAP PLASTIC on this expensive flagship?
Some other manufacturers are using metal and Samsung came up with the idea of using CHEAP PLASTIC.
I just bought this device and have lot of issues with it, the device overheat even after downloading all available updates.
Please guy take note when replacing your sim on your device to avoid breaking the CHEAP PLASTIC.
STILL WAITING FOR SAMSUNG CARE TO GIVE ME FEEDBACK ON THE COST OF REPLACEMENT. I GUESS THIS WILL BE MY LAST SAMSUNG DEVICE.
Click to expand...
Click to collapse
Same case here...I dont knwo what happened but when I tried to open the sim card tray, the sim card was left inside. Tried to call the service center say: Php470.00 for the sim card tray, P750.00 for the labor, P1030.00 to bring the unit back together because they are going to open the whole unit. And not just that. If the mother board will be damaged if they will pull out the sim card, they will charge me for the mother board for Php10,0000.00!!! So complicated huh? Im now torn if I will have the sim card removed or just let it stay that way since netowrk is working...
---------- Post added at 04:03 AM ---------- Previous post was at 04:00 AM ----------
okolobaccess said:
SAMSUNG SIM SLOT BROKEN
How can Samsung use some CHEAP PLASTIC on this expensive flagship?
Some other manufacturers are using metal and Samsung came up with the idea of using CHEAP PLASTIC.
I just bought this device and have lot of issues with it, the device overheat even after downloading all available updates.
Please guy take note when replacing your sim on your device to avoid breaking the CHEAP PLASTIC.
STILL WAITING FOR SAMSUNG CARE TO GIVE ME FEEDBACK ON THE COST OF REPLACEMENT. I GUESS THIS WILL BE MY LAST SAMSUNG DEVICE.
Click to expand...
Click to collapse
Hi Any feedback? was this fixed?
AnnP said:
Same case here...I dont knwo what happened but when I tried to open the sim card tray, the sim card was left inside. Tried to call the service center say: Php470.00 for the sim card tray, P750.00 for the labor, P1030.00 to bring the unit back together because they are going to open the whole unit. And not just that. If the mother board will be damaged if they will pull out the sim card, they will charge me for the mother board for Php10,0000.00!!! So complicated huh? Im now torn if I will have the sim card removed or just let it stay that way since netowrk is working...
---------- Post added at 04:03 AM ---------- Previous post was at 04:00 AM ----------
Hi Any feedback? was this fixed?
Click to expand...
Click to collapse
I was able to change the sim without replacing the tray
I just placed the sim i know i will using with phone, so ever since i have not change the sim.
To change the sim, you if first try to eject the tray, that will help to free the sim tray, then you use picker to remove the sim and you can insert another one back in.
have been using mine ever since.