Hello everybody.. im really not happy..
I was updating my quarx rom from november to the new one.. when i installed it worked good, but well when i try download the gallery and keyboard of the android 4.2 it crashes my gallery/camera of my defy+...
Then i installed the rom again and the rom comes all bugged, the wifi not working more, the browser dont opening, some buttons not working..
then i decided to make a Downgrade to a stable mode of jordan (cyanogenmod 7.2.0 jordan stablemod)
But in the downgrade my defy+ bricks and when i tried to flash it, i downloaded the SBF from here: sbf.droid-developers.org/umts_jordan/list.php the SBF from VIVO Brasil.
I put it on the rsd lite and the rsd appears "restarting system .. 10%, 50% and then 100%" but when it go to 100% the rsd asks to reboot manually... and now its reboot automatically, without stop, just start on motorola logo and VIVO logo then restart, it cant stop, just if i take off the baterry...
When i try to connect the usb it dont appears in the RSD anymore...
Its totally bricked? I will lose my defy+?
Can someone help me???
Thanks!
When "please manaully power up this phone" comes up, there're special steps you must take, not just rebooting. (Found somewhere here, but can't remember where)
Flash your phone again (Make sure you flash the latest build, 2.3.6 DFP-231 or you'll face another brick "black screen".
1. When the message comes up again, don't close RSDlite yet.
Remove USB, power off phone. Leave RSDlite open.
2. Remove phone's battery, wait 5 sec, put it back and boot into Bootloader Mode
3. Connect USB again, RSDlite will recognize your phone and continue flashing.
4. RSDlite should show Finish/pass now, if the phone not reboot itself, do it.
5. If stuck at boot logo, try Stock recovery> wipe data/ wipe cache.
---------- Post added at 06:21 PM ---------- Previous post was at 06:16 PM ----------
Wow I checked your link and found out you're flashing wrong SBF! Those are for Defy MB525 but you got Defy+ MB526.
You'll get Black screen for sure if flashed successfully.
You should look into this forum harder, there's a big post about SBF here. http://forum.xda-developers.com/showthread.php?t=966537
intemptesta said:
When "please manaully power up this phone" comes up, there're special steps you must take, not just rebooting. (Found somewhere here, but can't remember where)
Flash your phone again (Make sure you flash the latest build, 2.3.6 DFP-231 or you'll face another brick "black screen".
1. When the message comes up again, don't close RSDlite yet.
Remove USB, power off phone. Leave RSDlite open.
2. Remove phone's battery, wait 5 sec, put it back and boot into Bootloader Mode
3. Connect USB again, RSDlite will recognize your phone and continue flashing.
4. RSDlite should show Finish/pass now, if the phone not reboot itself, do it.
5. If stuck at boot logo, try Stock recovery> wipe data/ wipe cache.
---------- Post added at 06:21 PM ---------- Previous post was at 06:16 PM ----------
Wow I checked your link and found out you're flashing wrong SBF! Those are for Defy MB525 but you got Defy+ MB526.
You'll get Black screen for sure if flashed successfully.
You should look into this forum harder, there's a big post about SBF here. http://forum.xda-developers.com/showthread.php?t=966537
Click to expand...
Click to collapse
Bro i dont flashed it succesfully, and i cant go to recovery, i press all buttons when the phone starts but he just restart and restart no stop. And the computer not detects anymore the USB.. I probably lose my defy
Try updating or reinstalling drivers with the latest RSD Lite. Maybe it will help but you have to remember: As long as your phone turns on, you can repair it!
ToMpI97 said:
Try updating or reinstalling drivers with the latest RSD Lite. Maybe it will help but you have to remember: As long as your phone turns on, you can repair it!
Click to expand...
Click to collapse
I can't do anything with my phone
I got access to the boot now when i press the power button + vol. up but it just say it "Baterry Low, Cannot Program"
The computer don't detect the USB anymore!!
Oh... You just have to charge up your battery somehow(with a wall charger or an other defy...) or you can use the McGyver methot shown below: http://forum.xda-developers.com/showthread.php?t=892026
Just follow the steps carefully and do it on your own responsibility!!!! It will definetaly help you!
ToMpI97 said:
Oh... You just have to charge up your battery somehow(with a wall charger or an other defy...) or you can use the McGyver methot shown below: http://forum.xda-developers.com/showthread.php?t=892026
Just follow the steps carefully and do it on your own responsibility!!!! It will definetaly help you!
Click to expand...
Click to collapse
Hi there...I am stuck in bootloader menu for my motorola defy plus 526.
I was trying to upgrade my android version from 2.3.6 to (CM 7.2).I followed all the steps mentioned out there in various forums .But mistakenly i installed a latest version of gapps with it ,so that when it rebooted the android keyboard and a couple of other apps were not working and kept on giving errors..so i again reset and wiped all the data through recovery mode and installed CM 10.2 with its gapps but it didnot reboot and was stuck at the cm10 logo for more than 30 mins.so I again went to the recovery mode and wiped and reset all the data and then it got stuck and didnt boot again.I have tried to flash the sbf files though bootlog using RSDLITE 4.9 but i always get a fail message....and I am stuck. Whenever I put the battery in bootloader menu appears..I cannot find the appropriate sbf file (I have tried Chinese retail for motorola defy)..I dont know where the fault is..Is it the wrong SBF file or something else..My phone details are as follows
MOTOROLA DEFY+ MB526
DJ: T20120227-03121
MODEL NO: HG3303AP5G8
MSN M77ASC2HQH
IMEI 358961040445497
TYPE MVQ7-334411011
Made in china is also written in the backpannel under battery panel
please help....
Related
Current Situation:
When I say bricked, I mean BRICKED in all caps. The phone is completely unresponsive. If I try to turn it on – no good. If I try to put it in bootloader mode – no response. If I hold the volume button down and depress the power – no menu displays. I get no ‘M’. I get nothing. Except…
If I fire up RSD Lite 4.9 and plug in the phone, it does recognize something. Under model it displays “S Flash OMAP3630”. If I load up an sbf file (I’ve been following Higgsy’s incomparable “How To” guide - http://forum.xda-developers.com/showthread.php?t=853674 and using the generic UK sbf file he recommends) and depress “Start” within RSD Lite, the phone will display “SW Update In progress…” in white blocky text. RSD Lite says it’s executing and, after several minutes will display a Status of “Finished” and a Result of “PASS”. On the phone, the screen goes dark but a white notification light displays. While the phone is still plugged in, I can depress the power button on and off and RSD Lite will recognize it’s there (if it’s on) or not recognize the phone is there (if the power is toggled off).
Note that the battery is fully charged.
I’ll give you a little background info:
Background:
I purchased Defy phones for my wife and me for Christmas. Her’s is working fine, is unrooted, and has only a few apps beyond stock (Angry Birds of course!). But of course I had to play with mine. All went well until I (stupidly) installed the latest T-Mobile update which removed my root access. This was not acceptable to me as I had overclocked my phone for performance purposes. I had a really hard time getting root access back until I at last found a version of SuperOneClick that did the trick.
By this time I had reset the phone back to factory settings. So I thought “Well, I might as well flash some cool ROM”, so I flashed a Gingerbread themed Froyo cooked up for the Defy. Unfortunately, it didn’t work (for whatever reason). I was stuck at the dreaded ‘M’.
Next I started following Higgsy’s guide (as mentioned above) but I guess I screwed something up because now the phone is totally unresponsive except as detailed above.
So where do I go from here? Some possibilities:
Flash T-Mobile 2.2 test sbf?
Link?
Flash Original SBF?
Link?
I’ve still got my wife’s phone which is working perfectly fine. Is there a way to copy files from her phone to my dead phone and get some life?
Do you guys have some other steps you’d recommend?
I’d really like to get my phone working again and would much appreciate the help. Many thanks in advance.
(Note that I’m a Noob so please don’t assume I know anything!)
(Yet another note: I'm in the USA.)
Which .sbf's and in which order did you install them?
The same happened to me after I'd flashed the 3.4.2 sbf, then tried to downgrade back to 2.34. it went blank and I had to reflash 3.4.2 again.
If you've flashed 2.51 or 3.42 then you can't downgrade from them. So the fix would be to flash the same rom again.
I have the same problem and this how i fix it
1.http://forum.xda-developers.com/showthread.php?t=892026&highlight=low+battery your phone will show in rsd lite
2.flash http://forum.xda-developers.com/showthread.php?t=933555 with him you get a error that can not be installed
3. disconnect phone from USB and remove the battery
4. Replace the battery in the phone and power up, and phone immediately go into the bootloader
5. Flash bootonly http://forum.xda-developers.com/showthread.php?t=899450
6. and finaly flash http://forum.xda-developers.com/showthread.php?t=922430
it works for me
sorry for bad english
Solved
I flashed http://forum.xda-developers.com/showthread.php?t=922430 per your suggestion and I'm now up and running. Thank you.
Motorola Defy bricked
hi
i have a question about my defy. The white led is still shining but there is no connection to the pc. I connected via USB-cable.
pls HELP!!!!!
I have a similar issue as the OP..
I originally rooted the phone using simpleoneclick... then I overclocked it using setvsel...
it was running fine for an hour or so, and then I ran quadrant (several times over the course of the hour) and the final time, it rebooted during the middle of a test, and then it would just keep looping the bootup moto logo and "android" screens.
at that point I could still enter the bootloader and recovery screens. I tried wiping data and resetting to factory defaults with no avail.
Finally I followed a thread on flashing a new rom to the phone with RDSLite and the uk rom. After getting it to finish flashing and it showing a 'Finished' and 'PASS' status as the OP mentioned, te phone now no longer responds. Power button does not trigger the screen to go on, regardless of if I try to press the volume buttons with it or not.
The only response I get from it is when it is connected to the computer, the white led turns on, and the computer (and rdslite) recognizes it. I can still flash it with rdslite and the screen turns on displaying the SW update In progress message...
but that's about all I can get it to do.
Any help and advice would be greatly appreciated
edit: I should also mention that after the uk 2.21 rom I've also tried the china 2.2.1 roms.... Should I also try flashing the 2.51 uk version as well?
Okay, I tried a few more roms and this one "JRDNEM_U3_3.4.2_117-00..." has everything back up and running...
however now i'm running into the issue of apps that i've 'downloaded' not actually installing...
bricked
same problem here. rsd can detect my phone but still failed flashing. i changed and renamed the /sbf but still doesnt work... please help
MB525 Defy Bricked
MB525 Defy bricked and rsd cannt detect my phone failed . ... please help
its dead. Actually i uninstalled busybox and in this process all the system files also deleted by busybox. now phone is not starting. if anyone can suggest. I was using MIUI rom. can any one make it alive again.
[email protected]
. ....please help
Same problem here, but my phone is only detected by a friend's laptop. I think I have to flash Defy+ rom
try to flash sbf use rsd
If your phone is detected by RSD Lite, then you have an easy fix in just flashing a new sbf. If it's not detected and you can't charge your battery, you're going to have to use the MacGyver method.
if sbf doesnt work u better send it to warranty
Well. On my computer the phone isn"t even recognized. Maybe because some RSD Lite files are missing and it need them to detect bricked defy (i did reinstalled RSD Lite)
If it's recognised on your friend's computer but not on yours then it means that you probably have the versions of the motorola drivers or rsd lite that have problems.
white led solution
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
I'm Mc Gayvering my phone. Just tried a led directly connected to USB and fried it
This is my last hope
Is your phone worked?
I have the same problem. I try many ROM,But all of them dosn't work.
When I put in the battery,it shows Bootloader,When i flash a ROM use RSD,the phone always display SW Update In progress... Then the RSD's status is error verifying code group XX(XX=32/33/39/40 etc.) checksums.
What should I do?
THS.
Help :mad :
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
wesleybinho said:
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
Click to expand...
Click to collapse
dude this is all same **** u flashed wrong sbf.
flash the sbf service flash higher or same version which came by default wid ur phone.
flashes here http://and-developers.com/sbf:defy
I tried to flash a custom rom to a defy, but after flashing i got a bootloop.. After that i have tried everything to get a normal working installation but everything failed.
Now i am stuck with a phone that does not want to boot and even cannot get into the bootloader... So i cannot flash using RSD Lite.
Is there another way to unbrick this phone? Or is it end of story?
can you enter on CWM??
Sent from my MB526 using XDA App
1) Remove battery
2) Plug phone to PC
3) launch rsdlite (make sure rsdlite driver's is already working properly)
4) Press power and vol+ , and insert battery.
5) Defy screen might still blank but rsdlite would show status connected.
6) flash back your default sbf
7) boot into stock recovery and do factory reset.
8) reboot.
Note: if your defy is in full flash over gingerbread sbf, you're in trouble. Flash again any gingerbread sbf might help for quick resurrection. If your defy is in froyo, try flashing only froyo, otherwise if you're desperate, gingerbread sbf would help. You're warned for no possibility of downgrade.
Note 2: Battery must at least 80% and above to safely flashing and recovering process.
farsight73 said:
1) Remove battery
2) Plug phone to PC
3) launch rsdlite (make sure rsdlite driver's is already working properly)
4) Press power and vol+ , and insert battery.
5) Defy screen might still blank but rsdlite would show status connected.
6) flash back your default sbf
7) boot into stock recovery and do factory reset.
8) reboot.
Note: if your defy is in full flash over gingerbread sbf, you're in trouble. Flash again any gingerbread sbf might help for quick resurrection. If your defy is in froyo, try flashing only froyo, otherwise if you're desperate, gingerbread sbf would help. You're warned for no possibility of downgrade.
Note 2: Battery must at least 80% and above to safely flashing and recovering process.
Click to expand...
Click to collapse
Tried this, but with no effect.
klompie said:
I tried to flash a custom rom to a defy, but after flashing i got a bootloop.. After that i have tried everything to get a normal working installation but everything failed.
Now i am stuck with a phone that does not want to boot and even cannot get into the bootloader... So i cannot flash using RSD Lite.
Is there another way to unbrick this phone? Or is it end of story?
Click to expand...
Click to collapse
What file did you flash??
gommers1978 said:
What file did you flash??
Click to expand...
Click to collapse
I made a nandroid backup first. Then i tried to install MIUI rom and that did not boot. Tried to restore my nandroid backup, but it did not work. After that i have tried to flash a lot of sbf files but all did not work correclty. Also putting back my nandroid backup was not working.
Your battery is fully loaded?
What happens when you plug in the loader (powercord with adapter in AC plug) when phone is off, is there a battery loading icon appearing?
gommers1978 said:
Your battery is fully loaded?
What happens when you plug in the loader (powercord with adapter in AC plug) when phone is off, is there a battery loading icon appearing?
Click to expand...
Click to collapse
Nothing happens.. not even the power led turns on.
The last time i flashed it was almost fully loaded.
klompie said:
Nothing happens.. not even the power led turns on.
The last time i flashed it was almost fully loaded.
Click to expand...
Click to collapse
When you turn it on the screen stays black or does the M logo appear?
gommers1978 said:
When you turn it on the screen stays black or does the M logo appear?
Click to expand...
Click to collapse
When i "turn it on" it stays black
klompie said:
When i "turn it on" it stays black
Click to expand...
Click to collapse
If there is no white led or anything im afraind you have to send it for repair.
In the Netherlands i have a very good experience with:
http://www.gsmrepareren.nl/eindgebruiker/
Last thing you can try is to turn the phone on with vol down but i think you have allready tried that.
gommers1978 said:
Your battery is fully loaded?
What happens when you plug in the loader (powercord with adapter in AC plug) when phone is off, is there a battery loading icon appearing?
Click to expand...
Click to collapse
I have the same problem. I come from 2ndinit cm10 and wanted to revert back to cm7.2 but my defy failed to boot. After that I flashed FIXED.French.3.4.2-164.RETAIL.sbf
I hoped that might flash the kernel (home, back buttons were dark due to cm10). I got the red M back and a bootloop.
So I tried some sbf's I had on my hdd. Now the battery is at 3,3v and rsd lite doesn't get the phone. When I apply 5v (like the McGyver hack) the voltage drops to about 4v because the battery is being charged (dangerously I know).
Anyway rsd lite sees my defy again, I am able to flash. But when it should reboot, rsd sais PASS and the screen stays dark.
Connecting usb causes the charging led go on.
How can I bring the device back to life?
Thanks
Dennis
Hi, hold vol down and power, then make a factory reset.
Sent from my MB526
That doesn't work. The screen stays black except I flash a sbf with externally powered battery.
I am not able to see the bootloader or recovery.
Sent from my Nexus 4 using xda app-developers app
I had this problem, try different sbf's. The first 2-3 that I tried which gave me a blank screen were too old (from 2010) and the last one was from 2011 which was successful. Try with sbf from 2011.
Do you still know what sbf's you have tried and which one did it's job?
Thank's for your answer though!
Edit:
I tried the following one without success
JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTDACH_P017_A003_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_164-003_VFBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFFR03A.0R_PDS03C_USAJRDNFRYOVFFR_P028_A014_M004_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTDACH_P014_A009_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_UCAJRDNFRYORTCOREEU_P023_A008_HWp3_Service1FF.sbf
i had same case, blank screen.
even no bootloader text.
with charger i got white led.
then connected it to pc and RSD found it,
then flashed with this instruction:
there is some kind special fixed SBF on the link
[GUIDE] All-in-One Defy Beginner's guide
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Download this SBF and Flash it.
Root your phone.
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery.
Reboot to CMW recovery, and wipe Data/Cache.
Install CM7 then install Google Apps.
Reboot an go into Stock Recovery (using the vol- button, not from Bootmenu).
Do a Data/Cache Wipe or you won't have any space when you're done.
Flash this Fixed SBF
Reboot into your nice new rom.
Do not Wipe Data anymore or you will have to start again.
You WONT be able to install full SBFs of any Éclair or Froyo since these Androids have lower CG Versions.
http://forum.xda-developers.com/showthread.php?t=1216982
Click to expand...
Click to collapse
Thanks!
But nothing changes. RSDLite still sais: Finished and PASS
shyd said:
Anyway rsd lite sees my defy again, I am able to flash. But when it should reboot, rsd sais PASS and the screen stays dark.
Connecting usb causes the charging led go on.
Click to expand...
Click to collapse
Did you try also this special fixed JORDN_U3_97.21.51.sbf from this guide ?
battery should not be low, otherwise RSD would not connect.
but if, then MacGyver power supply trick.
Yes, I took this sbf. Battery is ok. RSD lite is able to flash.
But when the phone should reboot, the screen stays black and the phone connects to RSD lite saying finished, pass.
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
1st don't loose your battery - when no working system on the device then it is not being charged
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
What ROM u had before flashing CM7?
Is it defy or defy+?
And you flashed CG5 sbf
When you give more details maybe I can propose proper solution.
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
Click to expand...
Click to collapse
If I understood right, OP's DEFY is completely bricked and he cannot even access recovery.
Anyway, I unfortunately no solution to propose as I have a DEFY in the same situtation and I'm currently unable to revive it. We aren't the only who had DEFY bricked like this and some managed to have it wake up by flashing certain sbf.
You can try searching "bricked defy" on XDA and see what sbf the topic creator used to save his DEFY, if he succeeded to.
dont flash sbf just after the bootloop..!
-JFK- said:
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
Click to expand...
Click to collapse
frend i wanna tell u onething.the very first time i did the flashing of cm7.1stable on froyo 2.2.2defy i got a bootloop..since i was in hostel i cudnt afford internet..so i was soo scared and even waited for 15 min..but the cm7 logo with an arrow swirling around didnt stop..i puld the batery out and again inserted and did something stupid like clearing data and got the condition worse
then i flashed sbf using rsd lite ..again rooted and flashed cm7.1 stable and got bootloop..this time i surfed net and found what shud hav been done ..
1)pull out the battery after the boootloop.
2)clear cache
3)reboot
tats it..the welcome window comes in no time..
so coming to the present issue, after flashing the smf did u get bootanimation with light passing over "android" againg and again ??
Check that u r using the latest RSD.
I have a Defy plus but the same thing happened to me before (black screen even no boot with vol up) so I connected my phone to the computer (I can't really remember if I powered with a vol up or not) but I got it recognized by the RSD. try connecting and powering on the the vol up if nothing just connect and see what will happen.
The most important thing is to use the latest version of RSD.
and please tell me if it worked.
I'm not responsible for anything.
Original message
:I need some serious help.
I tryed to flash custom 2.3.6 fixed sbf.
which didnt end well, after powerup i would go straight to bootloader with err codes.
so tryed to flash another stock SBF, that ended me in inifinte bootloop with android logo. after 20 minutes in bootloop i gave up and flashed another stock SBF this time it was cellcom israel sbf, it finished the flashing succesfully but now the phone wont powerup at all. not bootloader not recovey.
nada...
I really need your help here, any kind of insights will help. please this is urgent.
BTW: this is a red lense defy, last rom was JB 4.1.1 quarx 30.07 build.
the sbf was supposed to have the same rom.
update 1: managed to finally flash stock, cant enable 3g. phone is still rooted, installing superuser is succesfuly but doesnt control attributes. so 2ndinit currently does not work,
issue solved
Click to expand...
Click to collapse
UPDATE 16/11/2012: links check and updated everything should work.
Solution:
1. first get these files as we'll need all of them: Rsd lite (download and install that),
Motorola drivers (download and install: Here)
JORDN_U3_97.21.51.rar(contains sbf file): http://www.4shared.com/get/xzT3dMXv/JORDN_U3_972151.html
firmware.rar(contains another sbf file): http://www.4shared.com/rar/Ytt5O6--/firmware.html
2ndinit 1.4.2, and 2ndinit 2.3 (can be found here: http://forum.xda-developers.com/showthread.php?t=1032212).
also need the nandroid backup: http://www.4shared.com/file/pVQfB4bF/2011-06-11141427.html
[Optional]
superuser.zip file installing from recovery: http://downloads.androidsu.com/superuser/Superuser-3.2-arm-signed.zip
2. [Optional] I didn't have a router at my house and no signal at my phone and i needed internet for 2ndinit, so i installed a program that turns my wifi on the computer into a hotspot, it can be found here: http://www.connectify.me/
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
5. after installing Rsd lite, launch it, extract the JORDN_U3_97.21.51.rar and firmware.rar files into root directory (C:\ or D:\ or whatever).
in rsdlite press the
...
Click to expand...
Click to collapse
button and choose the JORDN_U3_97.21.51.sbf file.
connect your phone via a usb cable to your computer, the phone should state its connected. and you should see on the rsdlite window that a device is connected, click on it and press the button :"start".
let it finish and boot on itself (it should do that).
6. [Optional] if you started with low battery now is a good time to charge your phone.
7. transfer the 2ndinit 1.4.2 apk and the 2ndinit 2.3 apk into a folder in your sd card (name it "A" for ease of use).
also extract the 2011-06-11.14.14.27.zip into this folder on your sd card "/clockworkmod/backup/"
8. extract the superoneclick on your computer and launch it, while the phone is connected (should also be in usb debugging mode), press the root button in the superoneclick window and watch the magic, make sure you also install busybox (should be installed automatically when pressing the ROOT button).
9. disconnect your phone, use the file explorer provided with this rom and make sure you check with a "V" to "allow 3rd party apps" in the settings. install the 2ndinit1.4.2.apk file.
open the app after installation and make sure you have internet connectivity, press the install bootmenu option.(now pop-ups should appear regarding permissions, choose "allow" for all of them).
after the green led has turned on, go to settings menu under application/development and turn off the "usb debugging mode".
10. restart your phone and make sure you press the vol down button when the led turns blue during the bootup.
when in bootmenu, choose recovery-> custom recovery.
when in recovery, choose "wipe data/factory reset", "wipe cache", "advanced-> wipe dalvik".
now return to recovery menu and choose "backup/restore"->"restore->2011-06-11.14.14.27".
this should take a couple of minutes.
when its done, go back again to recovery menu, and choose again "wipe cache", "advanced-> wipe dalvik".
power off the phone.
11. hold the vol up button once again and power up the phone to go into bootloader screen.
connect your phone once again to your computer and on the rsdlite window choose the "firmware.sbf" file.
press start and flash it.
12. let the phone boot up, congrats you just revived your phone, root it once again using super one click (if needed), install the 2ndinit2.3.apk.
transfer whatever rom you like (dont try sbf's cause that's how I first got in this mess), reboot phone, go into stock recovery and install that zip after wiping data/factory reset. and ohh well you know the rest.
Good luck.
P.S if you can't or dont know where to find the files take a quick search in the forums and youll find most of them.
Reserved
reserved
when i flash firmware.sbs it takes me back to Android Bootmenu when it reboots please help. thanks
Shouldnt happen, make sure you Wipe Data, and cache, before the nandroid backup and after the nandroid backup.
only then u can flash the firmware.sbf
if the bootmenu still comes up simply choose "Boot-> set default-> normal". and reboot.
if still comes back to bootmenu (and i hope you are talking about bootmenu and not bootloader). install through custom recovery your favorite ROM and don't forget the corresponding Kernel.
good luck!
Is that work with bl7 ???
I've been trying to restore my phone for weeks, up until this thread, I started to think the internet couldn't help me. You are a god amongst men.
OK, banging my head against a wall here; I have 2 defy's. Mine has been to a war zone 4 times, I've replaced the screen (and the waterproof gasket) once, It's broken (the case) but still works except for the fact that the last time I had to flash an sbf I messed up the charging ability with the "macguyver" method.
Now I recently got a pristine looking red lens defy from a friend who said it wasn't booting...It "tried" but never stayed booted long. I tried immediately flashing one of the fixed sbf's with CM10 on it, and ever since I get the bootloader 09.10 code corrupt message.
I've tried the method listed here (by the way the first firmware in OP won't download for me, something about violating some terms of agreement?) the one labeled simply "firmware" downloaded.
Still no joy. Every flash I get all the way through code group 32 checksums match. Everything after that fails. Have tried multiple CEE, Nordic, Chinese, even Defy+ sbf (the new defy has red lens) with no luck.
Likewise when I tried flashing via linux (sbf_flash). The other night after battery out for quite awhile it led me to believe it had started working, and allowed me to get into recovery and wipe everything, but it was all false hope. It still did not boot (motorola M boot loop) and likewise, it still did not flash.
Anyone have any ideas how I can proceed to fix this thing?
I thought I had this thing figured out but obviously I was mistaken.
thanks in advance
I just unbricked my phone again yesterday after trying the latest cm10 sbf with no luck, so i can guarantee this method still works, however the firmware.sbf file is really needed and also the nandroid backup, so here's what i'll do:
1. i'll check what links are broken and reupload the necassery files.
2. I'll clean the the first message and update the links
so check back in about an hour
Thanks a lot for posting this. Tried to restore my phone using lot of other posts since the last 3 to 4 days days, but all in vain.
Was anybody able to install CM10 over this? After the installation, the phone is going into boot loop.
Thanks rtk217 for starting this guide very useful for noobs...
I've made some video tutorials using a few of the guides in the forums here...
hope it helps someone...
Its a complete step by step.
Part 1 of 4. This part deals with preparation of all the required files to successfully complete the custom rom installation.
http://youtu.be/jMAlys2_KG4
Part 2 of 4. How to restore Defy to default
http://youtu.be/6SUysKZ2E5Y
Part 3 of 4. How to root using SuperOneClick and install clockworkmod.
http://youtu.be/hd3_SRbkUWw
Part 4 of 4. How to install 2ndinit recovery and install CyanogenMod 10 Jelly Bean 4.1.2
http://youtu.be/gNPacGesWOI
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
k.manojraja said:
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Have you got a Defy or Defy+ as you are trying to install the cm10 zip for MB526 (Defy+)
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
k.manojraja said:
...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Why are you using 2ndInit 2.3???
All the guides and FAQs will tell you to use 2ndInit 1.4.2
hey i have the same problem did you fix it?
k.manojraja said:
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
Click to expand...
Click to collapse
hey i have the same problem did you fix it?
Thanks ...
Hay, Ur are a genie to me.. I tried so many mods after my imei no is gone. Wifi not working, issues with signal catching.. Now with your step by step guide i was able to overcome all of those... Thank you very much.
cmcooper123 said:
hey i have the same problem did you fix it?
Click to expand...
Click to collapse
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
k.manojraja said:
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
Click to expand...
Click to collapse
but if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
cmcooper123 said:
but if i flash defy plus firmware on a defy mb525 wont that brick it?
Click to expand...
Click to collapse
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
cmcooper123 said:
bwithut if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
Click to expand...
Click to collapse
I am really not sure if you have read the posts properly. I had no problems in flashing the defy plus sbf. The defy plus sbf that I gave you was a bl6 version and you can never downgrade to froyo.
97.21.51 is a Chinese éclair with bl5. 2nd boot builds were not working on bl5.
HEEEEELP!!! I'm in great need of assistance! I'm new to modified roms and I'm at a lose with my Motorola defy (MB525). it seems to be bricked and won't detect in my computer
Here is what i did:
1. I had rooted it with SOC
2. unlocked boot loader
3. I had installed clockwork mod and flashed CM10.1 Android 4.2.2. Everything was working but some of my google play services and data
4. The problem showed up when I tried to upgrade and install CM 10.2 Android 4.3
5. It flashed successfully but very time it would power on, it would forget all the settings. It also wouldn't boot into clockwork recovery mode and would reboot when installing Rom Manager.
6. I tried wiping cache but now it won't even boot up, just black screen.
7. I tried putting the clockwork mod back on but it goes to the andorid boot menu and can't find a custom recovery
8. Now it boots staight to android boot menu, It will not detect in my Mac or friend's PC
9. Downloaded motorola drivers, RSD Lite for pc and tried entering bootloader mode but battery is too low to put in USB transferring mode
10. Tried charging for hours but it is still not charged enough to do bootloader mode, doesn't seem to be charging.
11. When connected to a computer, it detects by displaying a white light but will not boot up to android boot menu.and is not detected by the computer
Not sure what else I can do, any suggestions? Please and thanks!
Similar issue
AlphaXray said:
HEEEEELP!!! I'm in great need of assistance! I'm new to modified roms and I'm at a lose with my Motorola defy (MB525). it seems to be bricked and won't detect in my computer
Here is what i did:
1. I had rooted it with SOC
2. unlocked boot loader
3. I had installed clockwork mod and flashed CM10.1 Android 4.2.2. Everything was working but some of my google play services and data
4. The problem showed up when I tried to upgrade and install CM 10.2 Android 4.3
5. It flashed successfully but very time it would power on, it would forget all the settings. It also wouldn't boot into clockwork recovery mode and would reboot when installing Rom Manager.
6. I tried wiping cache but now it won't even boot up, just black screen.
7. I tried putting the clockwork mod back on but it goes to the andorid boot menu and can't find a custom recovery
8. Now it boots staight to android boot menu, It will not detect in my Mac or friend's PC
9. Downloaded motorola drivers, RSD Lite for pc and tried entering bootloader mode but battery is too low to put in USB transferring mode
10. Tried charging for hours but it is still not charged enough to do bootloader mode, doesn't seem to be charging.
11. When connected to a computer, it detects by displaying a white light but will not boot up to android boot menu.and is not detected by the computer
Not sure what else I can do, any suggestions? Please and thanks!
Click to expand...
Click to collapse
I have a similar problem. My unmodified (not rooted) Defy (running 2.2.1) started to boot loop, so I eventually did a factory reset. That worked for a while, and then suddenly the defy froze on the Moto logo (not even cycling to the Blur screen) and I could no longer get to the reset screen. However I could still get to the bootloader, so I tried to use RDS lite. I got one sbf to say it passed, but the phone did not reboot. Now RDS will detect whether the phone is on or off (and if on I'll get a white LED) and I can flash the sbf still, but otherwise the phone is completely bricked - can't get to reset OR bootloader screen.
Any help would be appreciated greatly!
AlphaXray said:
HEEEEELP!!! I'm in great need of assistance! I'm new to modified roms and I'm at a lose with my Motorola defy (MB525). it seems to be bricked and won't detect in my computer
9. Downloaded motorola drivers, RSD Lite for pc and tried entering bootloader mode but battery is too low to put in USB transferring mode
Click to expand...
Click to collapse
First of all, you need to get the battery charged somehow. Here's some possibilities:
borrow from someone a "defy's battery compatible phone" and charge your battery inside that phone. A Defy or a Defy+ or a DroidX would work.
try to get an external battery charger
WARNING it's potentially dangerous: method B from this post (MacGyver way): http://forum.xda-developers.com/showthread.php?t=892026 :
Then you can go download mode and restore sbf.
---------- Post added at 12:35 PM ---------- Previous post was at 12:31 PM ----------
DefyVictim said:
I have a similar problem. My unmodified (not rooted) Defy (running 2.2.1) started to boot loop, so I eventually did a factory reset. That worked for a while, and then suddenly the defy froze on the Moto logo (not even cycling to the Blur screen) and I could no longer get to the reset screen. However I could still get to the bootloader, so I tried to use RDS lite. I got one sbf to say it passed, but the phone did not reboot. Now RDS will detect whether the phone is on or off (and if on I'll get a white LED) and I can flash the sbf still, but otherwise the phone is completely bricked - can't get to reset OR bootloader screen.
Click to expand...
Click to collapse
Which one sbf have you tried?
Are you sure is the right one? If yes, have you checked if it's corrupted or have your tried to redownload it?
DefyVictim said:
I have a similar problem. My unmodified (not rooted) Defy (running 2.2.1) started to boot loop, so I eventually did a factory reset. That worked for a while, and then suddenly the defy froze on the Moto logo (not even cycling to the Blur screen) and I could no longer get to the reset screen. However I could still get to the bootloader, so I tried to use RDS lite. I got one sbf to say it passed, but the phone did not reboot. Now RDS will detect whether the phone is on or off (and if on I'll get a white LED) and I can flash the sbf still, but otherwise the phone is completely bricked - can't get to reset OR bootloader screen.
Any help would be appreciated greatly!
Click to expand...
Click to collapse
How did RSD recognise your phone if you can't go to the bootloader?
Defy Wiki pages
There is Wiki page here at XDA with a lot of relevant information for Defy/Defy+: http://forum.xda-developers.com/wiki/Motorola_Defy
You may find this informations scattered there, but Wiki is always good starting point.
---------- Post added at 09:09 PM ---------- Previous post was at 08:52 PM ----------
hotdog125 said:
How did RSD recognise your phone if you can't go to the bootloader?
Click to expand...
Click to collapse
There is the answer: http://forum.xda-developers.com/wik...D_lite_to_recognise_a_phone_that_won.27t_boot
DeMonHell82 said:
First of all, you need to get the battery charged somehow. Here's some possibilities:
borrow from someone a "defy's battery compatible phone" and charge your battery inside that phone. A Defy or a Defy+ or a DroidX would work.
try to get an external battery charger
WARNING it's potentially dangerous: method B from this post (MacGyver way): http://forum.xda-developers.com/showthread.php?t=892026 :
Then you can go download mode and restore sbf.
---------- Post added at 12:35 PM ---------- Previous post was at 12:31 PM ----------
Which one sbf have you tried?
Are you sure is the right one? If yes, have you checked if it's corrupted or have your tried to redownload it?
Click to expand...
Click to collapse
_____
When I plug the phone into the USB the white LED comes on, but I can't raise ANYTHING on the screen (reset screen or bootloader screen, holding down the volume up or down w/ the power button). However pressing the power button alone does cause the computer to recognize hardware is plugged in, or alternately disconnected. RSD tells me a device is connected, but the only info given is the bootloader version and AP ID info (whatever that is). However, when I load the SBF, the phone lights up and says SW update in progress...
RSD tells me the phone is being rebooted and has passed, but screen goes dark and all I see i the white LED again.
I have no way of knowing how much juice is left in the battery (I have two, but I think one is dry) or if it is taking a charge..
I tried these two SBFs:
T-Mobile_MB525_6.19.0_1FF.sbf
JORDN_U3_6_36_0_SIGNED_USAJRDNTMOB1B4B5DE1028_0R_JORDANTMO_P022_HWp3_Service1FF.sbf
Only the 1st one works.
DefyVictim said:
When I plug the phone into the USB the white LED comes on
Click to expand...
Click to collapse
just to be sure you know it: when your battery is totally discharged, computer's usb doesn't give enough power to completely boot. (at least for me).
Milan Kerslager said:
There is Wiki page here at XDA with a lot of relevant information for Defy/Defy+: http://forum.xda-developers.com/wiki/Motorola_Defy
You may find this informations scattered there, but Wiki is always good starting point.
---------- Post added at 09:09 PM ---------- Previous post was at 08:52 PM ----------
There is the answer: http://forum.xda-developers.com/wik...D_lite_to_recognise_a_phone_that_won.27t_boot
Click to expand...
Click to collapse
To get RSDLIte to recognize your phone you have to enter boot loader mode. this means press VOL-UP + POWER If nothing helps, try pushing VOL UP before!' you put the battery in (RSDLIte should be running and awaiting a new connection at that time) If you are using Windows 7, try seting RSDLite to "compatibility mode: Windows XP SP3".
@DefyVictim said he could not get into bootloader and yet RSD recognised it.
Pleasa help
Hi.
I wanted to go back to stock ROM from Quarx's CM10 (sep 17) and flashed the next file with RSD, but ended up in bootloop at motorola logo.
DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
Any ideas which sbf to flash beforemy battery goes down?
Defy plus.
Thanks!!
arvair said:
Hi.
I wanted to go back to stock ROM from Quarx's CM10 (sep 17) and flashed the next file with RSD, but ended up in bootloop at motorola logo.
DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
Any ideas which sbf to flash beforemy battery goes down?
Defy plus.
Thanks!!
Click to expand...
Click to collapse
Try the Retail Taiwanese SBF.
Sent from my MB526 using Tapatalk
hotdog125 said:
Try the Retail Taiwanese SBF.
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
No, it doesn't work, now it doesn't even start to boot...
when i connect the cable it recognizeses, but the screen is black. any ideas?
thanks
arvair said:
No, it doesn't work, now it doesn't even start to boot...
when i connect the cable it recognizeses, but the screen is black. any ideas?
thanks
Click to expand...
Click to collapse
Some SBF should work. Try wiping cache in stock recovery
Sent from my MB526 using Tapatalk
Still stuck
DeMonHell82 said:
just to be sure you know it: when your battery is totally discharged, computer's usb doesn't give enough power to completely boot. (at least for me).
Click to expand...
Click to collapse
So are you saying that my issue might still be a dead battery, despite the fact that my computer and RSD notice when I turn on and off the phone, and even though the phone has enough power to tell me "SW update in progress" when I flash the SBF, and RSD says the flash is a "PASS" and that the phone is being rebooted? I'm really asking, not being sarcastic. Thanks!
DefyVictim said:
So are you saying that my issue might still be a dead battery, despite the fact that my computer and RSD notice when I turn on and off the phone, and even though the phone has enough power to tell me "SW update in progress" when I flash the SBF, and RSD says the flash is a "PASS" and that the phone is being rebooted? I'm really asking, not being sarcastic. Thanks!
Click to expand...
Click to collapse
can't be sure, i'm just guessing.
I just know that the download mode doesn't use as much power as the full android booting up. In fact trying to boot a dead (0%) battery with pc's usb, lead to boot loop in my case or no boot at all.
But of course you need to be sure to have a 70-80% charged battery. Try mcgyver on one of yours.
if this fails you need to check as well with other SBFs
Which SBF
DeMonHell82 said:
can't be sure, i'm just guessing.
I just know that the download mode doesn't use as much power as the full android booting up. In fact trying to boot a dead (0%) battery with pc's usb, lead to boot loop in my case or no boot at all.
But of course you need to be sure to have a 70-80% charged battery. Try mcgyver on one of yours.
if this fails you need to check as well with other SBFs
Click to expand...
Click to collapse
Exactly which SBF should I be using?? (I'm on T Mobile in the US, although I bought the phone unlocked). I had been running Android 2.2.1. The phone was NOT rooted.
DefyVictim said:
Exactly which SBF should I be using?? (I'm on T Mobile in the US, although I bought the phone unlocked). I had been running Android 2.2.1. The phone was NOT rooted.
Click to expand...
Click to collapse
i really don't know which one is the right one for you. i use the one for MB525, Tim italy.
You should carefully check between the lists in this post for your model/carrier :
http://forum.xda-developers.com/showthread.php?t=1216982 (section Official SBFs)
Be careful because MB525 (defy) and MB526 (defy+) have differents SBFs.
DeMonHell82 said:
First of all, you need to get the battery charged somehow. Here's some possibilities:
borrow from someone a "defy's battery compatible phone" and charge your battery inside that phone. A Defy or a Defy+ or a DroidX would work.
try to get an external battery charger
WARNING it's potentially dangerous: method B from this post (MacGyver way): http://forum.xda-developers.com/showthread.php?t=892026 :
Then you can go download mode and restore sbf.
---------- Post added at 12:35 PM ---------- Previous post was at 12:31 PM ----------
Which one sbf have you tried?
Are you sure is the right one? If yes, have you checked if it's corrupted or have your tried to redownload it?
Click to expand...
Click to collapse
I'm not sure it's the right one. It was the T-Mobile for USA one. However it said it passed, so I don't think corruption is the issue.