Database Users

Stock on Samsung Logo with Custom Lock Image

I had Mint Jelly2.1 installed and everything was working fine.
it started when I had used the APK Hide It Pro. I was in the process of hiding videos and I noticed that my phone got rebooted and got stock in the Samsung boot up image with the Custom Lock image.
I tried nandroid restore, 2 images, but both also failed to restore / bootup.
I tried re-installing ROM and it was successful but during reboot, it will still get stock on the boot image.
Last step.
I used ODIN to restore the stock ROM and ODIN was able to install and reset. And my phone rebooted but still got stock on the Samsung Logo with CUstom Lock Screen.
What else can I do to fix this?
Thank you.

Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.

scott14719 said:
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
Click to expand...
Click to collapse
I had tried to restore/flash from recovery before ODIN and it all Failed.
Anyway, the last step ODIN restore and it was still stock at the Samsung Logo with Lock image.
I left the phone to charge the whole night and this morning when I turned it on, it was able to start properly with ODIN stock ROM.
I tried to go to recovery, and can only be done manually, and it was not the TWRP recovery but the stock one, with very small characters.
I tried to install Mint Jell2.1 right away but just reboots.
I realized that I might need to root it again and downloaded the Tool and re-loki'ed/rooted and installed TWRP.
Now, I am able to install Mint Jelly 2.1 and restoring all my apps.
I appreciate the comment.
Thank you.

scott14719 said:
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
Click to expand...
Click to collapse
Yeah, every single time I ODIN back to stock, I get stuck at the splash screen also. And rebooting to 3E (factory) recovery and "restore factory defaults" works great.

CZ Eddie said:
Yeah, every single time I ODIN back to stock, I get stuck at the splash screen also. And rebooting to 3E (factory) recovery and "restore factory defaults" works great.
Click to expand...
Click to collapse
I can confirm this works happened to me yesterday.

leoj85 said:
I can confirm this works happened to me yesterday.
Click to expand...
Click to collapse
I am running out of options. I thought I am already out of this stuck on Samsung Logo with Custom Lock icon.
I had ODIN to stock I337UCUAMDL and reset, Ran Loki patch / installed TWRP, intermittently it will get stuck.
I flashed Shoshock 1.9, was able to reboot and setup basic settings.
I manually reboot to check if it was able to fix the problem, but no.
I am stuck again and don't know what is the next step for trouble shooting it.
any advise will be appreciated.
Thank you.

I got stuck to 1st boot image of Samsung with Lock Custom Icon.
I did format data/factory reset/clear cache/dalvik.. all of the wipe ootions.
I flashed a new ROM, successful, rebooted pass the logo and booted fine. I did not change any settings yet and I rebooted to check if it will get stuck again and sure after reboot, it got stuck again on the 1st image that shows up : Samsung Logo with the Lock Custom Icon.
qwer43 said:
I am running out of options. I thought I am already out of this stuck on Samsung Logo with Custom Lock icon.
I had ODIN to stock I337UCUAMDL and reset, Ran Loki patch / installed TWRP, intermittently it will get stuck.
I flashed Shoshock 1.9, was able to reboot and setup basic settings.
I manually reboot to check if it was able to fix the problem, but no.
I am stuck again and don't know what is the next step for trouble shooting it.
any advise will be appreciated.
Thank you.
Click to expand...
Click to collapse

IMPORTANTwhen using*twrp*recoverydo not choose "format data"(that option will ask you to type "yes")what if i did?rom will not boot past "padlock" boot screen orrom will not boot on second reboot*help!! I did, I did*1. sigh2. d/l odin3. d/l odin stock restore MDL4. let it do its thang5. after its complete it will be stuck at padlock6. should have "rtfm" huh?*7. pull battery8. hold home button, vol-up, power at same time9. when phone vibrates, release power, while still holdingvol-up, and home button10. you will now be in "stock recovery"11. wipe factory reset then wipe cache12. reboot*13. swear you will never "ignore instructions"

After cyanogen factory reset, phone does not start even on recovery mode

Hi,
I have Samsung Galaxy S4 I9500.
I installed Cyanogen latest nightly build. Cyanogen worked perfect. I reset to factory settings from Cyanogen's settings. But after that:
- I can not open the phone's recovery (volumeup + home +power)
- I can not start operating system.
On both theese actions "Samsung" logo appears for 3 seconds, but after nothing is happening. Black screen stucks.
I look from eclipse logcat's, there is no log from phone. because OS did not started.
I tried to re-install clockwork (exatly with same files), but did not changed anything. I am not getting errors or even warning.
I will be happy if you can help me.
Thank you

Are you able to get into download mode (volume down, home, power)? If so, flash a stock ROM using Odin. If the S4 works after flashing the stock ROM, install TWRP recovery and then install Cyanogenmod.
P. S. You want to install TWRP as Clockworkmod is no longer being updated.

Hi,
had the problem of not getting into recovery at all randomly. Shutting down the phone, removing the battery and leaving the phone untouched for about half an hour helped me to enter recovery.
Regards

Mr.Brick said:
Hi,
had the problem of not getting into recovery at all randomly. Shutting down the phone, removing the battery and leaving the phone untouched for about half an hour helped me to enter recovery.
Regards
Click to expand...
Click to collapse
Hi,
I try these: I wait for 1 night by putting out the battery, also I restart the phone million times. But nothing changed.

Strephon Alkhalikoi said:
Are you able to get into download mode (volume down, home, power)? If so, flash a stock ROM using Odin. If the S4 works after flashing the stock ROM, install TWRP recovery and then install Cyanogenmod.
P. S. You want to install TWRP as Clockworkmod is no longer being updated.
Click to expand...
Click to collapse
I did not try to install different recovery software. Because Clockworkmod is already worked for the first time.
I will try to install other recovery softwares and I will write the results here.
Thank you

marka_yirmi said:
I did not try to install different recovery software. Because Clockworkmod is already worked for the first time.
I will try to install other recovery softwares and I will write the results here.
Thank you
Click to expand...
Click to collapse
I solve my problem by installing TWRP recovery. I could not understand how Clockworkmod stoped to work itself by doing nothing.
Thank you for your interest.

Clockworkmod is no longer maintained and doesn't recognize some coding in recent updater scripts included with ROMs. That is why it fails while TWRP succeeds.

Can't enter recovery or update: boot certification verify error

I am on 6.0.1 CyanogenMod13. I haven't done a whole lot root-wise but just today I was looking to get something from xposed and it turned out I didn't even have it installed, so I downloaded it and installed it but needing to flash the .zip I tried to boot into TWRP recovery. Somehow it got uninstalled or something because I could only get into the LG stock screen asking if I wanted to wipe everything. So I tried to install TWRP using Flashify, I installed and on the reboot it gave me a "Can't Enter Recovery Or Update" and some more things about it on the top left above the boot logo. I can't do anything recovery-wise. I'm looking to sell my G2 but I want to make it stock or at least a clean install and I can't do any of that. What can I do??

NinjaChachi said:
I am on 6.0.1 CyanogenMod13. I haven't done a whole lot root-wise but just today I was looking to get something from xposed and it turned out I didn't even have it installed, so I downloaded it and installed it but needing to flash the .zip I tried to boot into TWRP recovery. Somehow it got uninstalled or something because I could only get into the LG stock screen asking if I wanted to wipe everything. So I tried to install TWRP using Flashify, I installed and on the reboot it gave me a "Can't Enter Recovery Or Update" and some more things about it on the top left above the boot logo. I can't do anything recovery-wise. I'm looking to sell my G2 but I want to make it stock or at least a clean install and I can't do any of that. What can I do??
Click to expand...
Click to collapse
Same happened to me still cant fix it but you could try going back to stock (wouldn't work for me driver problems on windows 10)
http://forum.xda-developers.com/showthread.php?t=2432476

bump

homegrown1982 said:
Same happened to me still cant fix it but you could try going back to stock (wouldn't work for me driver problems on windows 10)
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
This got me down to 4.4.2 but when trying to install TWRP it gives me the same Boot certification error and I can't
EDIT: I used AutoRec on 4.4.2 and I have TWRP working!

HELP! Phone stuck in boot cycle, cannot flash rom

Hi everyone! Surfed the forums in the past for some minor help but never needed to register till now. I've tried everything and can't get my phone to boot.
So last night while camping my phone started boot cycling out of nowhere. I let it try a few times and then removed the battery and went to sleep. This morning I woke up and tried a few more times, replaced the battery with a non-stock double-capacity one I have, and still cycled. Sometimes it restarts on the Galaxy Note 4 logo, and sometimes on the Sprint logo. It will do this indefinitely. At one point It finally booted and said it was updating apps (like from an Android update, not the regular app updates.) Before I could do anything else with it though, the battery wiggled loose and it started power cycling again. Because of this one boot I think the root cause is related to an Android update that decided to run without my permission.
So I gave up and drove hoe from camping. Tonight I had tried everything I could find from factory reset to the toolkit to Odin and nothing has had any effect. The toolkit didn't see the device, and Odin failed to flash. Can anyone help me? I can boot to recovery and I can get into download mode, but nothing seems to work. The phone isn't hard bricked, but everything I can find on soft brick solutions hasn't worked. Thanks in advance!
~Evan

Oh also, when I boot into recovery mode it says "installing system update" with the android open chest logo, and then goes to a dead android and says "no command" before getting into the recovery mode menu.

ekuest said:
Oh also, when I boot into recovery mode it says "installing system update" with the android open chest logo, and then goes to a dead android and says "no command" before getting into the recovery mode menu.
Click to expand...
Click to collapse
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.

Trex888 said:
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.
Click to expand...
Click to collapse
Ok thanks that worked! I got into TWRP by setting Odin to not reboot. If I let it reboot then it just restarted after the TWRP flash and kept power cycling like before. If I uncheck auto reboot in Odin then after the flash I can pull the battery (can't figure out any other way to turn the phone off) and then when I restart in recovery mode it goes into TWRP. From there I tried a factory reset (wipe data, cache, and dalvik) and that didnt fix the power cycling. Do I have to flash TWRP and then immediately flash a rom right after? Or should I try an advance wipe in TWR, or maybe "repair or change file system" from the advanced wipe menu?

Bump? I still can't boot my phone. Got into TWRP but no idea what to do from there. I can't flash any rom successfully in Odin and I can't get the phone to boot. Now it just hangs on the "Samsung Galaxy Note 4" splash screen, doesnt even go to the "Samsung" screen or the "Sprint" screen like it used to.

Trex888 said:
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.
Click to expand...
Click to collapse
how do you do the "then flash any rom" part? i have no idea how to do that since Odin doesn't seem to work.

ekuest said:
how do you do the "then flash any rom" part? i have no idea how to do that since Odin doesn't seem to work.
Click to expand...
Click to collapse
1,Flash twrp recovery in odin
2,press volume up+home+power button and boot into twrp
3,in twrp go to wipe/advance wipe and wipe system/cache/data/dalvik cache
4,Flash any custom rom for your model from twrp recovery
If you allready have twrp installed then skip 1 and download any rom like cm12 and gapps
Then flash from twrp

Trex888 said:
1,Flash twrp recovery in odin
2,press volume up+home+power button and boot into twrp
3,in twrp go to wipe/advance wipe and wipe system/cache/data/dalvik cache
4,Flash any custom rom for your model from twrp recovery
If you allready have twrp installed then skip 1 and download any rom like cm12 and gapps
Then flash from twrp
Click to expand...
Click to collapse
Do I just go to install in TWRP and then select the zip file on my microSD card? I tried that with N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip and if says "Could not find 'META-INF/com/google/android/update-binary' in the zip file. Error installing zip file '/external_sd/N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip'" Then I tried with a CM called cm-12.1-20161016-NIGHTLY-trltespr.zip and it seemed to work, and showed a little blue android face but then it still wouldnt boot. Now when I try to start the phone it says "KERNEL IS NOT SEANDROID ENFORCING Set Warranty Bit: Kernel" in tiny text on the top right of the Galaxy Note 4 splash screen, then boots to the blue android face and then powers off after about 2 seconds. After that, I cant even recovery boot the phone until I remove and reinstall the battery. Then the same thing happens, boot to blue android face and then shut down. I'll try some more android zips I found but I think there is a deeper problem with the phone here.

ekuest said:
Do I just go to install in TWRP and then select the zip file on my microSD card? I tried that with N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip and if says "Could not find 'META-INF/com/google/android/update-binary' in the zip file. Error installing zip file '/external_sd/N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip'" Then I tried with a CM called cm-12.1-20161016-NIGHTLY-trltespr.zip and it seemed to work, and showed a little blue android face but then it still wouldnt boot. Now when I try to start the phone it says "KERNEL IS NOT SEANDROID ENFORCING Set Warranty Bit: Kernel" in tiny text on the top right of the Galaxy Note 4 splash screen, then boots to the blue android face and then powers off after about 2 seconds. After that, I cant even recovery boot the phone until I remove and reinstall the battery. Then the same thing happens, boot to blue android face and then shut down. I'll try some more android zips I found but I think there is a deeper problem with the phone here.
Click to expand...
Click to collapse
Which android version you ware running last time before this issues start happning ? 5.1.1 or 6.0.1 ?
And i think you are trying to flash firmware file from twrp thats not possible you will require a custom rom.
If you are on 5.1.1 then try any lojjipop n910p based roms like cm 12
If you are on 6.0.1 then try n910p marshmallow based rom like cm13

Trex888 said:
Which android version you ware running last time before this issues start happning ? 5.1.1 or 6.0.1 ?
And i think you are trying to flash firmware file from twrp thats not possible you will require a custom rom.
If you are on 5.1.1 then try any lojjipop n910p based roms like cm 12
If you are on 6.0.1 then try n910p marshmallow based rom like cm13
Click to expand...
Click to collapse
I always run the updates so I'm pretty sure I was on 6.0.1. I tried again with CM13 with and without GApps and same thing always happens. No matter what I do, the phone always hangs and shuts off when it gets to the CM splash screen. I will upload a video soon. Do you know why the phone says that SEANDROID thing?
I am using CM13 from here: https://www.androidfilehost.com/?w=files&flid=44727
I am using GApps from here: http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico

ekuest said:
I always run the updates so I'm pretty sure I was on 6.0.1. I tried again with CM13 with and without GApps and same thing always happens. No matter what I do, the phone always hangs and shuts off when it gets to the CM splash screen. I will upload a video soon. Do you know why the phone says that SEANDROID thing?
I am using CM13 from here: https://www.androidfilehost.com/?w=files&flid=44727
I am using GApps from here: http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
Click to expand...
Click to collapse
Seandroid thing is normal if you are running custom rom. Cuz any custom comes with root and custom kernel so nothing to worry.
Did you tried another battery?
And how long did you wait to phone boot after flashing cm13 ?
Go to sprint note 4 xda forum and try different roms and be patient and wait atleast 20min to phone boot
You cannot flash cm13 without gapps and make sure gapps is for 6.0.1 marshmallow.
Once your phone boot normal go to download mode and flash 6.0.1 firmware in odin and after finish flash immediately go to stock recovery and do factory reset your phone will be normal.
Make sure your battery is not damaged maybe it is causing shut off. Issue.

Well since I can't flash CM13 with TWRP and I can't flash a stock rom with Odin, what other options do I have? Is there any way to get a bcakup file that someone else has made on their Note 4 in TWRP and try restoring from that? I've also read about ADB sideloading and another recovery called CWM or something and I don't know if those will be any different or just more failed flashes. I think the problem is deeper in the phone since it wouldn't boot with the stock rom and now it won't boot with CM13.
EDIT: Just saw your last post. I have 2 batteries, one samsung stock and one aftermarket TechOrbits double capacity. The phone does the same thing with either one so I ruled out the battery a while ago. Think there's any chance theyre both bad and I should order a new one? I don't really want to invest more money into a dead phone. I don't think I waited that long after installing CM13. I'll try it again and give it a half hour. I doubt that will change anything though.
EDIT2: Also when I go to download mode (says "ODIN MODE <HIGH SPEED>" at the top) it has some red text at the bottom I think might mean something. Does this mean anything to you or is it typical?
UDC START
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: ABOOT

Phone stuck in bootloop!

So i started to update viper4android and i accidentally pressed volume up which tries it to install via AROMA now my phone is stuck on bootloop, it just keeps rebooting to recovery trying to install the viper4android, is there any possible way to get out of this or my phone is dead?
Any help will be appreciated,
TIA

a safe haven said:
So i started to update viper4android and i accidentally pressed volume up which tries it to install via AROMA now my phone is stuck on bootloop, it just keeps rebooting to recovery trying to install the viper4android, is there any possible way to get out of this or my phone is dead?
Any help will be appreciated,
TIA
Click to expand...
Click to collapse
You didn't specify your exact phone model, so assuming KLTE
AFAIK aroma does not work well with our TWRP
Can you pull the battery and then boot directly to recovery so you can wipe system/cache/Dalvik and then flash the ROM again?
If recovery is messed up, can you pull battery, then boot to download mode so you can reflash TWRP in Odin/Heimdall, or better yet flash latest stock Rom (caution if you have a g900V/A with stock locked bootloader) in Odin/Heimdall, followed by TWRP?
Post again if you need more help, and try to include as many specifics as possible eg exact phone model, TWRP version, Rom zip filename, Gapps, etc. I'll try to help if I can

I am very sorry for not posting the model number, mine is G900I (KLTEDV), everytime i turn on the phone it just keeps booting onto the recovery and goes to install the viper4android but it fails to do that and reboots again and again, its impossible to do anything basically, not booting onto the rom or anything. Recovery version is TWRP 3.2.2-0, it opens up directly to the zip file which is viper4androidfx-aroma.zip and tries to flash it and crashes and the whole process starts again, pulling the battery didnt break the chain it just keeps rebooting to do that again!

I reflashed a new twrp recovery ver 3.2.3-0, but it still tries to flash that zip file again! Even after deleting the file itself it still tries to flash it and keeps rebooting!
How do i get rid of this twrp loop!? This is so weird!
P.S: After reflashing twrp the phone boots to the rom normally but i cant access recovery anymore, whenever i go to recovery it goes on in an infinite bootloop (cleared cache and dalvik cache using es explorer root), I am also on LineageOs 16.0, tried stock recovery but the stock recovery also keeps bootlooping.
P.S this viper4android is a magisk module!

NVM, solved it by flashing stock rom! Thanks!