Hey everyone
I've tried to find in the forum a similar tread, but since i didn't found it I've decided to start a new one, so, if anyone find another similar tread please say something...
My hd2 t8585, had a dead digitizer, again after 6 months, so i went to the repair shop and asked for the warranty, also, asked to repair the usb port because it was slightly loose...
After a long wait (2 months) the phone was back, but it wasn't recognized from the PC... back to the repair shop so the usb can be properly repaired...
3 weeks later, phone was back again, I've installed the hspl, the clk... but the phone stuck on initializing the clk...
I really don't know what is happening, and how to solve it...that said my question is, anyone knows what could be? how to solve it? I want to have at list a clue before i go back to the repair shop screaming about a bad repair ...
this is the screen that i get stuck:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
image link to ubuntu one
thank you for the help....
no one have a clue?
kryptos_sparta said:
no one have a clue?
Click to expand...
Click to collapse
I have read your thread and don't know how to help.
Replacing anything in the device can cause unexpected problems, like this one.
I'd say try a different version of cLK, or simply try MAGLDR. But if they don't work either, I can't help.
http://forum.xda-developers.com/showthread.php?p=38027551#post38027551 i've found out the same problem but the bad block is in the system partition and is marked... anyone could help?
Marvlesz said:
I have read your thread and don't know how to help.
Replacing anything in the device can cause unexpected problems, like this one.
I'd say try a different version of cLK, or simply try MAGLDR. But if they don't work either, I can't help.
Click to expand...
Click to collapse
i've tried another clk and to change the partitions table ... could be a broken wire? flat cable?
BTW, did you try to install stock WM ROM?
If negative, you have to try it and post your result...
bib*oops said:
BTW, did you try to install stock WM ROM?
If negative, you have to try it and post your result...
Click to expand...
Click to collapse
hey
finally i had the time to install the original WM rom, it installed without problems but the digitizer is dead... so now i've sent the hd2 back to the repair shop so they can do a proper job.
thanks
Related
i bought this for christmas and the dude gave it to me like this. everytime i cut it on it goes to this screen. what is this ? how do i get back to regular stock os ? thanks !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I believe that is the regular stock os.
If you mean Sense, you need to go into the Today settings and check Sense.
Looks like the guy you got it off loaded it with a custom Win OS.... It is an OS that is good if you wish to run Android on the device.
You would need to ask the guy you got it off if it is Hard SPLed and then reload the stock OS back onto it.
Cheers...
there are no today settings , idk what this is.
i think it is hard spled cause i press vol down and power and it says something like that. how would i get stock os back on ? it wont let me sync to computer.. just charge it
Looks like ultramag is correct.
It must be a barebones windows os.
Goto this thread. It should help.
http://forum.xda-developers.com/showthread.php?t=653614
if you have hard spl, check on the stickies for hd2/leo http://forum.xda-developers.com/showthread.php?t=713977 do a task 29, find a good working windows rom, and choice of radio and it should be good to go.
Looks like all he did was put chuckydroid rom on it. If he knows nothing about phones task 29 could screw the phone as well as changing the radio. Id leave the radio for now so dont run the chance of getting the wrong one and bricking the phone.
Sent from my HTC HD2 using Tapatalk
letrain02 said:
Looks like all he did was put chuckydroid rom on it. If he knows nothing about phones task 29 could screw the phone as well as changing the radio. Id leave the radio for now so dont run the chance of getting the wrong one and bricking the phone.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Yep. That is Chuckydroid rom. Download Microsoft Mobile Device Center and install it and then try to sync the phone. If it shows up in Microsoft Mobile Device Center then just install the stock HD2 Tmobile rom. Then you will be good to go.
Hello everybody here i have a picture to my phone and it shows where my phone stuck where i was trying to update to a new system version, can you please expertise advise weather this phone can be fixed or its gone for no return.
Thanks in advance hopes yall have a good new year
please check below picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can tell you now that you should post ALL info from your fastboot screen.
Can you get into recovery?
What were you doing to cause your phone to do this?
Sent from my T-Mobile myTouch 3G using XDA App
offdutyninja808 said:
I can tell you now that you should post ALL info from your fastboot screen.
Click to expand...
Click to collapse
He included a picture of his phone in fastboot, I think that would qualify as providing all his fastboot info.
This has been answered SO MANY TIMES now... like 5 times THIS week alone...
You don't even have to do a search... just look at the first 2 pages.. Come on!
I think you can fix this by only looking at the first 8 posts or so...
Jeez... another one?
Use fastboot to flash the recovery.
Reboot to recovery, flash stock (s-on) spl
Flash rom.
The 3 phenoms back to back to back. I know he included a picture, but can't really see it.
BTW, I love being able to hook up two phones. When things get boring with one, the other is willing and ready.
Sent from the other side if the Galaxy!
offdutyninja808 said:
The 3 phenoms back to back to back. I know he included a picture, but can't really see it.
BTW, I love being able to hook up two phones. When things get boring with one, the other is willing and ready.
Sent from the other side if the Galaxy!
Click to expand...
Click to collapse
I rooted my Magic before a few days ago, put some ROMs 2.1 update1 and everything is working correctly. When I tried to put any coocked
Froyo rom did not work. Then I threw in a last-ver.SPL 1.71 (it seems to me, but otherwise it was 6.35 ... working with SPL 1.6) Recovery mode is
changed and installation Froyo (Magician 6.1 I believe) was duly passed, but the problems emerging. Phone could not normally turned on and I could go into Recovery and fastboot. However the installation of any Rom was impossible. Radio has changed (I think it happened after the trial
Vodafone launch 2.2.1. ver.) at 2.22. I tried to go back to the SPL and 1.33 Since then I have more or Recovery Mode or Safe Mode. When you turn on
(my version of Magic is 32A) phone only appears HTC Magic no reaction on the computer when it shackles via USB. I guess what I was wrong (SPL's) but how it if possible to save?
P.S. Sorry for my bad english ...
Comrades, please help. How can I flash my bricked radio part.
When it's booting, on the right-down side is NO GSM!
So flashing can not be done in bootloader mode, stuck at 0% and error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried 1.00, 1,02, 1.04, so nothing works
Maybe u have a solution?
Shahen said:
Comrades, please help. How can I flash my bricked radio part.
When it's booting, on the right-down side is NO GSM!
So flashing can not be done in bootloader mode, stuck at 0% and error.
View attachment 513916
I have tried 1.00, 1,02, 1.04, so nothing works
Maybe u have a solution?
Click to expand...
Click to collapse
Did you already tried flashing SHIP rom with SHIP update tool? I see you use some hackerz one
aeroflyluby said:
Did you already tried flashing SHIP rom with SHIP update tool? I see you use some hackerz one
Click to expand...
Click to collapse
Yes I tried with qtek ship update tool. Nothing works Stuck at 0% too
Device Radio Bricked
Hey sorry to say that you also bricked your radio chip like mine..
Mine is also the same problem and also aeroflyluby has the same problem..
Now you can't use you GSM
F**k, I c. So, now it's just a ppc
Pity.......
Yes Dear
And thats the only reason i stopped my development and bought a Htc Magician.......
In June i will buy a Htc HD2
Now tell me SHAHEN are you going to provide us your custom rom in WWE
bilalbest said:
And thats the only reason i stopped my development and bought a Htc Magician.......
In June i will buy a Htc HD2
Now tell me SHAHEN are you going to provide us your custom rom in WWE
Click to expand...
Click to collapse
Here it is
But my battery is dead unfortunately, so i can't do and upload screenshots.
It's test version, because this is my last build before i got brick.
i have allso problem
i have same problem now
to try 1 rom and 2 rom orginal update
and see you xda IIi is ok
TO SHAHEN
Thanks dear...........
And for battery you can do following
Put your battery back in the mobile
Now put it on charging (connect it to the charger)
After 15 to 20 minutes it the device will start and it will start charging
Hello guys,
I'm new here so hello to all.
Recently installed the DFT WP7 on my HTC HD2 and now have been prompted to update through my Zune software. Everything seems to work as normal, rebooting the phone, but and error occurs stating the phone cannot be backed up and that my registry settings are incorrect.
Is there a fix for this or a step I've missed when I flashed my device?
Any advice will be much appreciated!
the only step you've missed perhaps is not to read the other 200 threads stating the update not to work on our hd2's
malsehn said:
the only step you've missed perhaps is not to read the other 200 threads stating the update not to work on our hd2's
Click to expand...
Click to collapse
What do you mean? Are there any others? NO WAY!
Why am I not surprised the Forum Jester would make his appearance.
You are most welcome as a new member of these boards, but please do take on board the lessons of not searching before posting.
It was only the forum jester this time; next time it may be someone with a flamethrower!
Have fun.
muddholio said:
Hello guys,
I'm new here so hello to all.
Recently installed the DFT WP7 on my HTC HD2 and now have been prompted to update through my Zune software. Everything seems to work as normal, rebooting the phone, but and error occurs stating the phone cannot be backed up and that my registry settings are incorrect.
Is there a fix for this or a step I've missed when I flashed my device?
Any advice will be much appreciated!
Click to expand...
Click to collapse
wait and give a space of time and enjoy what you have,because it seams that the update you are looking for it's not as good as it sound...that's in the first.
second as the guys told you have to search the forum for your question first mate
third,as it was mentioned form hard working members in xda-developers,you could get a new piece of art on your hd2 soon.
conclusion, ignore the update!!!
Gustopher said:
You are most welcome as a new member of these boards, but please do take on board the lessons of not searching before posting.
It was only the forum jester this time; next time it may be someone with a flamethrower!
Have fun.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Man, 4 times now ive answered this (jk)
...but enough of the poking thanks, im gonna close this thread.
CHeers.
i have a dacia car and the canbus couldn't work in my device as the specs as this picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but a friend has the same car with this specs it worked very well with him
can i download this frimware to my device and make it work ?
and kindly show how to make it thanks alot
any help
hi, do you have any chance to make a full software dump of Your friend device and upload this ? i have YT9216CJ but when i try to root this i flashed wrong files and now i bricked my device.
szefuncio2015 said:
hi, do you have any chance to make a full software dump of Your friend device and upload this ? i have YT9216CJ but when i try to root this i flashed wrong files and now i bricked my device.
Click to expand...
Click to collapse
unfortunately no as he is not in same my country
i'm also afraid from this brick too
to be honest with you leave it as is, i have some previous experience with root but as i said, now i have bricked device and i trying to repair this from few days without success...
szefuncio2015 said:
to be honest with you leave it as is, i have some previous experience with root but as i said, now i have bricked device and i trying to repair this from few days without success...
Click to expand...
Click to collapse
this is the problem there is a lot of firmware for this device with a lot of names and codes
yes, its a lot of firmwares and devices, i think i need to buy new device because i no see light in a tunnel to repair this what i bricked i tried to ask for firmware and support on 4pda.ru forum but also without success.
but i wish you good luck
szefuncio2015 said:
buy new device because i no see light in a tunnel to repair this what i bricked i tried
Click to expand...
Click to collapse
thanks a lot and i hope you find a solution to solve your device
szefuncio2015 said:
to be honest with you leave it as is, i have some previous experience with root but as i said, now i have bricked device and i trying to repair this from few days without success...
Click to expand...
Click to collapse
did you tried this
hi [B]Mohie.soheim[/B], yes i saw that, but it's also not working for me, now i have second device, but i will try to rescue my old radio, maybe someday it will be alive
i tried to get help on 4pda.ru forum, but one guy said i using translator so and i'm idiot because i do not speak Russian Language
thanks for your help