Uninstallilng BitDefender Anti-Theft application from Samsung Galaxy S2 - Galaxy S II General

How to remove BitDefender Anti-Theft application from Samsung Galaxy S2
Presuming you have BitDefender Anti-Theft application with password enabled:
1) install Root App Delete from Google Play on your phone.
2) Open the Root App Delete application and select the BitDefender Anti-Theft application and click on Uninstall button. It will prompt you that in order to be able to uninstall this app, you need to remove its Device Administrator rights. This application might take you to the Device Administrators settings but if it doesn't then go to: Settings -> Security -> Device Administrators.
3) There you will find the BitDefender Anti-Theft application enabled through a radio button. Unchecking that radio button will prompt you with a pop-up to Deactivare it or Cancel the action. Click on Deactivate.
This action will open the BitDefender Anti-Theft application prompt asking you for the PIN you setup earlier in order to allow you to deactivate it. Just hit Cancel (if the general Back button from the bottom left of your phone doesn't work) and it will automatically skip the PIN identification and it will deactivate the application.
4) Go back and open the Root App Delete application and select the BitDefender Anti-Theft application and click on Uninstall button. This time, will uninstall it for sure
Enjoy.
MENTION: I'm not sure if this procedure requires ROOT. Ive done it on my S2 which is rooted but it might as well work for non rooted devices. Please leave feedback.
Thanks.

This also works on my rooted S4 using normal android uninstall and because of this I won't use Bitdefender aymore. It took me literally 1 min after I've installed the app to figure this out.

Related

How can I activate Sprint Tab?

The volume up down thing didnt work for me.
Sent from my SPH-P100 using XDA App
Really no comments?
Sent from my SPH-P100 using XDA App
Sprint Activation
By activation I am assuming you mean gain network access to the Sprint data system? It should have prompted you for activation data at boot. Try through settings to connect to the mobile network and that should reinitiate the activation process. Not sure if this helps...
Sprint Activation
By activation I am assuming you mean gain network access to the Sprint mobile data system? It should have prompted you for activation information at boot. Try through settings to connect to the mobile network and that should reinitiate the activation process. Not sure if this helps...
Thanks for the reply. I meant I bought the Tab without a data plan and do not wish to. It keeps trying to activate but cant. I am looking for a way around it.
Sent from my SPH-P100 using XDA App
I've been grappling with this for a while now, and unfortunately, the activation process can only happen if you were to have service. You could, thanks to Sprint's 30 money back guarantee, buy a month of service, activate your device, and then cancel the service within a few days and you won't be charged. Of course, this invovles spending a whole lot of time on the phone with Sprint, or going into a Sprint store, which you may not want to do. Don't worry though, there is another option.
I decided I didn't want to go through any hassle, so I spent some time fooling around with the system and came up with the following method. It took me a while to in the application manager to track down the programs responsible for the activation prompt, but I found them. What you need to do is this:
NOTE: I have tested this on the SPRINT Tab with the latest software.
*DO NOT uninstall any of these apps, just "Freeze" them. If you delete any, you may loose the ability to do firmware and Android OS updates!*
1. Root your Tab, (preferably with z4root), I suggest using the "permanent root" option.
2. Go to Menu -> Settings -> Applications -> Development -> and check "USB Debugging"
3. Install Titanium Backup
4. Run Titanium Backup and go into "Backup/Restore" Look for "Software Update 1.5.0" in the list.
5. Tap the application name.
6. On the window that comes up, select "Freeze" It will give you a confirmation of success and the "Freeze" button will change to "Defrost" now hit the back button.
7. Locate "Sprint Installer 2.0", "Sprint Zone SZ 2.1.11", and "System Updates 1.0.0" Repeat steps 5 and 6 for each of these applications.
8. Close Titanium Backup
9. Restart
Now the activation prompt will not come up and it won't interrupt you when using your Tab. It doesn't affect anything if you plan to use the Tab off-contract with Wifi only.
I chose to "Freeze" the apps because it denies them access to the system, which removes the activation problem. I didn't uninstall them, though because if you want to activate it on the network at any time later, or you need to do a Firmware/Android OS update through official channels, you may need these apps.
If you want to undo this at any time, follow the directions the same way, but during step 6 select "Defrost" instead of "Freeze"
I hope this helps.
Thanks
Works great! Thanks for the info.
It´s posible active the phone
rkmj said:
I've been grappling with this for a while now, and unfortunately, the activation process can only happen if you were to have service. You could, thanks to Sprint's 30 money back guarantee, buy a month of service, activate your device, and then cancel the service within a few days and you won't be charged. Of course, this invovles spending a whole lot of time on the phone with Sprint, or going into a Sprint store, which you may not want to do. Don't worry though, there is another option.
I decided I didn't want to go through any hassle, so I spent some time fooling around with the system and came up with the following method. It took me a while to in the application manager to track down the programs responsible for the activation prompt, but I found them. What you need to do is this:
NOTE: I have tested this on the SPRINT Tab with the latest software.
*DO NOT uninstall any of these apps, just "Freeze" them. If you delete any, you may loose the ability to do firmware and Android OS updates!*
1. Root your Tab, (preferably with z4root), I suggest using the "permanent root" option.
2. Go to Menu -> Settings -> Applications -> Development -> and check "USB Debugging"
3. Install Titanium Backup
4. Run Titanium Backup and go into "Backup/Restore" Look for "Software Update 1.5.0" in the list.
5. Tap the application name.
6. On the window that comes up, select "Freeze" It will give you a confirmation of success and the "Freeze" button will change to "Defrost" now hit the back button.
7. Locate "Sprint Installer 2.0", "Sprint Zone SZ 2.1.11", and "System Updates 1.0.0" Repeat steps 5 and 6 for each of these applications.
8. Close Titanium Backup
9. Restart
Now the activation prompt will not come up and it won't interrupt you when using your Tab. It doesn't affect anything if you plan to use the Tab off-contract with Wifi only.
I chose to "Freeze" the apps because it denies them access to the system, which removes the activation problem. I didn't uninstall them, though because if you want to activate it on the network at any time later, or you need to do a Firmware/Android OS update through official channels, you may need these apps.
If you want to undo this at any time, follow the directions the same way, but during step 6 select "Defrost" instead of "Freeze"
I hope this helps.
Click to expand...
Click to collapse
Hi there, Do you think is´t posible to liberate the phone?
This is EXACTLY what I was looking for! Worked GREAT! Thanks!
... but I have a question regarding 2 of the items that are frozen now. like the Software Update 1.5.0 & System Updates 1.0.0 --- are they specific to sprint? what exactly are these for and why do these have to be frozen in order to disable the sprint activation? will i still be able to get firmware updates and all that jazz?
if i want to check for updates, do i need to defrost these?
How to get root app
maybe I'm missing something but how do you get the root app. I.e. to bypass activation you need a root application. However I can't find a way to download apps without the tab being activated. Seems like a paradox. In a nut shell how can I get the z4root application installed when the tab is not yet activated?
Thanks for any help
You can always turn on the WiFi, and connect it to an available network to gain access to the Market.
I too have been struggling with the activation prompt, and since Rooting is still somewhat touchy with our SPH-P100, I've found that the best answer is to put your Tab in Airplane mode, and manually turn on the WiFi. This will keep any options you're unsure of on the back burner 'til the devs here have some more time to save money for, and play with the Tab!
MSteinmetz said:
maybe I'm missing something but how do you get the root app. I.e. to bypass activation you need a root application. However I can't find a way to download apps without the tab being activated. Seems like a paradox. In a nut shell how can I get the z4root application installed when the tab is not yet activated?
Thanks for any help
Click to expand...
Click to collapse
You can find z4root here http://forum.xda-developers.com/showthread.php?t=833953
I have a Sprint tab, and if you hit cancel on the activation each time you turn the device on, you can still access your home screen and all the apps and enable wifi to access the market.
To permanently bypass activation, side load & install the z4root app from the link above and install Titanum Backup from the market .. follow the instructions posted by rkmj earlier in this thread.
kamgrn said:
This is EXACTLY what I was looking for! Worked GREAT! Thanks!
... but I have a question regarding 2 of the items that are frozen now. like the Software Update 1.5.0 & System Updates 1.0.0 --- are they specific to sprint? what exactly are these for and why do these have to be frozen in order to disable the sprint activation? will i still be able to get firmware updates and all that jazz?
if i want to check for updates, do i need to defrost these?
Click to expand...
Click to collapse
Sorry for taking so long to respond to this, but my XDA notification settings were all screwed up. I just realized that you asked this. Software Update 1.5.0 and System Updates seem to be Samsung apps that are tied directly to Sprint Zone and the activtion prompt. They run periodically and when they activate, they query Sprint Zone to see if the device has been activated on the network. In order to stop the activation prompt, these need to stop running.
I can't really tell about firmware updates just yet. Based on the way Sprint generally provides them, you will have the option of OTA or via PC. With this fix in place, you will need to run the update via the PC. If you wanted to get the firmware updates OTA, you will need to defrost the programs. Unfortunately, you will also have to activate the device.
My method doesn't change anything on the device. It just disables the prompt. In order to receive anything OTA, you will have to activate the device. I have a theory about how you can both disable the prompt and still query for OTA updates, but I have to do a bit of testing first. I will post back here once I have tested it completely.

[Q] APP's administrator rights block lock screen options after uninstall

Hi,
I've been using this app for a couple of days (https://play.google.com/store/apps/details?id=joel.sternet.se.full2) but decided I wanted to uninstall it again.
Now I followed the instructions by the author, so that the device administrator rights would be removed and I could remove the app.
However the 3 top options for the type of lock screen (the 3 that don't require a password) are still greyed out, and right below it says that these options are disabled by a device administrator.
I've checked the device administrator menu under security, and I only have ADM and Cerberus active, and those two were active before I tried the new app.
Help, what can I do to remove this? Is a factory reset the only solution?
Kind regards
had this problem, finded solution another place so i just write here:
1. Go to Settings
2. Select Security which under "General" tab
3. Under Credential Storage -> Clear Credentials
credit: vinod240 from another android forum.

Cannot install anything from Oculus

Hi, I get the following error message when trying to install aything from Oculus Store
I am using G935F, Stock UK ROM, Un Rooted
Can anybody help. Thanks
Did you disable any Facebook apps starting with com.facebook.etc.? I believe these are needed for VR stuff, Oculus belongs to Facebook. There should be 2 of them.
Juuls said:
Did you disable any Facebook apps starting with com.facebook.etc.? I believe these are needed for VR stuff, Oculus belongs to Facebook. There should be 2 of them.
Click to expand...
Click to collapse
Yap that fixed it, Thanks so much.
I just received my oculus. I have the GS7 edge. When I connect my phone to the oculus for initial setup, then remove it as instructed, I get a network error. I've taken both to AT&T and have spent 1 1/2 hours on the phone with various people. No one could help. Anyone have any ideas?
Got mail from Oculus (5 days later) -->
Hello!
After the most recent Gear VR update, we noticed that you may be having issues upgrading to the latest version of the Oculus software. This also may affect your ability to download and install content for your Gear VR. This may be due to having some critical Oculus services blocked or disabled. Below are some steps to help enable those services to allow this update and future updates to reach your Samsung device for Gear VR usage.
If you continue to have problems after following the instructions below, please reach out to Oculus Support via https://support.oculus.com and we will work with you to resolve your issue.
Why aren't Gear VR apps installing or updating on my mobile phone?
If Gear VR apps aren't installing on your mobile phone, the most likely reason is that the App Manager and Installer aren't enabled.
What does the App Manager and Installer do?
The App Manager and Installer allow Gear VR apps to be installed on your mobile phone. It also makes sure that the latest versions of Oculus apps are on your mobile phone.
How do I turn on App Manager and Installer ?
To turn on the App Manager and Installer, tap on the "Settings" application, then "Applications" and finally "Application Manager". Make sure you have chosen the "All" category and find the following applications:
com.facebook.appmanager (App Manager)
com.facebook.system (Installer)
Tap into each and make sure they are enabled.
Unable to find com.facebook.system
If you are on Android OS 6.0 (Marshmallow), com.facebook.system may not be visible. Please try the following steps:
1. Navigate to Settings
2. Tap on Application Manager
3. Locate the More menu in the upper right corner
4. Tap Show System Apps
5. This will make com.facebook.system visible and allow you to enable it
The App Manager and the Installer must be enabled before Gear VR apps can be installed and updated on your mobile phone.
- The Oculus Support Team
thunderroid said:
Got mail from Oculus (5 days later) -->
Hello!
After the most recent Gear VR update, we noticed that you may be having issues upgrading to the latest version of the Oculus software. This also may affect your ability to download and install content for your Gear VR. This may be due to having some critical Oculus services blocked or disabled. Below are some steps to help enable those services to allow this update and future updates to reach your Samsung device for Gear VR usage.
If you continue to have problems after following the instructions below, please reach out to Oculus Support via https://support.oculus.com and we will work with you to resolve your issue.
Why aren't Gear VR apps installing or updating on my mobile phone?
If Gear VR apps aren't installing on your mobile phone, the most likely reason is that the App Manager and Installer aren't enabled.
What does the App Manager and Installer do?
The App Manager and Installer allow Gear VR apps to be installed on your mobile phone. It also makes sure that the latest versions of Oculus apps are on your mobile phone.
How do I turn on App Manager and Installer ?
To turn on the App Manager and Installer, tap on the "Settings" application, then "Applications" and finally "Application Manager". Make sure you have chosen the "All" category and find the following applications:
com.facebook.appmanager (App Manager)
com.facebook.system (Installer)
Tap into each and make sure they are enabled.
Unable to find com.facebook.system
If you are on Android OS 6.0 (Marshmallow), com.facebook.system may not be visible. Please try the following steps:
1. Navigate to Settings
2. Tap on Application Manager
3. Locate the More menu in the upper right corner
4. Tap Show System Apps
5. This will make com.facebook.system visible and allow you to enable it
The App Manager and the Installer must be enabled before Gear VR apps can be installed and updated on your mobile phone.
- The Oculus Support Team
Click to expand...
Click to collapse
This worked great.... Does having the Facebook stuff enabled waste any battery? And can I disable again after installing? Been trying to figure out why nothing would install for days
Thanks
Galaxy S7 edge
I have Facebook installed but I don't see those files. I'm on s6 edge
jimmy3299 said:
I have Facebook installed but I don't see those files. I'm on s6 edge
Click to expand...
Click to collapse
you can try this
http://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-oculus-activity-update-t3419818
Cannot install samsung gear vr software
com.facebook.system is missing from system app. Please Help.
I had to make a factory reset from recovery and install all app again. Now Oculus works.
Sent from my SM-G935F using Tapatalk
How do i reinstall com.facebook.appmanager amd com.facebook.system... i had erased them by mistake and need them for my oculus...
thunderroid said:
Yap that fixed it, Thanks so much.
Click to expand...
Click to collapse
How did you enable it? I found the app, but there is no such option... Thanks!
Sent from my SM-T805 using XDA-Developers mobile app
thorosso said:
How did you enable it? I found the app, but there is no such option... Thanks!
Sent from my SM-T805 using XDA-Developers mobile app
Click to expand...
Click to collapse
How did you disable it?
Sent from my SM-G935F using Tapatalk
Thanks
Juuls said:
Did you disable any Facebook apps starting with com.facebook.etc.? I believe these are needed for VR stuff, Oculus belongs to Facebook. There should be 2 of them.
Click to expand...
Click to collapse
You nailed it. I had a notification that said com.facebook needs to install. Once I completed the install i could install groove and other apps from the Oculus app store.
thunderroid said:
Got mail from Oculus (5 days later) -->
Hello!
After the most recent Gear VR update, we noticed that you may be having issues upgrading to the latest version of the Oculus software. This also may affect your ability to download and install content for your Gear VR. This may be due to having some critical Oculus services blocked or disabled. Below are some steps to help enable those services to allow this update and future updates to reach your Samsung device for Gear VR usage.
If you continue to have problems after following the instructions below, please reach out to Oculus Support via https://support.oculus.com and we will work with you to resolve your issue.
Why aren't Gear VR apps installing or updating on my mobile phone?
If Gear VR apps aren't installing on your mobile phone, the most likely reason is that the App Manager and Installer aren't enabled.
What does the App Manager and Installer do?
The App Manager and Installer allow Gear VR apps to be installed on your mobile phone. It also makes sure that the latest versions of Oculus apps are on your mobile phone.
How do I turn on App Manager and Installer ?
To turn on the App Manager and Installer, tap on the "Settings" application, then "Applications" and finally "Application Manager". Make sure you have chosen the "All" category and find the following applications:
com.facebook.appmanager (App Manager)
com.facebook.system (Installer)
Tap into each and make sure they are enabled.
Unable to find com.facebook.system
If you are on Android OS 6.0 (Marshmallow), com.facebook.system may not be visible. Please try the following steps:
1. Navigate to Settings
2. Tap on Application Manager
3. Locate the More menu in the upper right corner
4. Tap Show System Apps
5. This will make com.facebook.system visible and allow you to enable it
The App Manager and the Installer must be enabled before Gear VR apps can be installed and updated on your mobile phone.
- The Oculus Support Team
Click to expand...
Click to collapse
This fixed my issue, thank you!
Hi,
Currently working with the Samsung Gear VR on a S6 Edge. Recently, I factory reset my phone due to lack of storage space. When I went to reinstall Oculus everything went through fine but when I try to install apps from the Oculus store it goes through the download process, then when it begins installation it stops and says, "Could not install (app name)." Facebook app manager and Facebook app installer are both enabled and I still get the error. Please help, can't seem to find a solution.
Have you found a solution? We have exactly the same issue with the same equipment.
Guys, Here is the solution, may be the only solution in the internet for this issue.
My device is Samsung S6 edge and Device is Gear VR and Hopefully the solution applies to all the devices with the same issue.
1. Need to install Facebook app and sign in
2. Login to oculus using facebook account
Important part is, it seems some of the service doesn't have the storage permission, what I did was allow storage permission to all the "Oculus" Applications and "Facebook" application which are in direct apps as well as systems apps.
Works fine for me !! Thank you

[SOLVED] Need help to remove/uninstall Malware app.. Any suggestion..

[SOLVED] It was installed in the Secure Folder.. that's why I couldn't find it. I managed to install Avast, and then install it on the Secure Folder. Following that I ran Avast scan inside the secure folder and it found the apk and removed it. Pesky app..
Recently downloaded an apk that locked my phone.. I noted that it had the Draw over other apps permissions but didn't think it could cause this..
Anyway, this app fills the whole screen and can not remove it. I was able to turn off the phone by long pressing the power and volume buttons and when restarting I discovered that I was able to use the phone for a couple minutes before the malware appeared again.
During this time I was able to power off phone and get to Safe Mode. I disabled all the apps which had the overlay permission and also apps that affect system configuration.
But I am currently not being able to find it and uninstall it. Although doing the above steps the malware still appears and locks my screen when I enter normal mode.
**Is there a way to find the latest app installed and remove it without root? Otherwise, would it be possible to remove it via ADB? I've never used it but I believe it could be useful this time.. the only thing is I am not sure what's the .apk name..
I'm using a Galaxy S8 international version without root
Thanks in advance for your help!!!!
SOLVED IT.
Name: VideoChat.apk
It was installed in the Secure Folder.. that's why I couldn't find it. I managed to install Avast, and then install it on the Secure Folder. Following that I ran Avast scan inside the secure folder and it found the apk and removed it. Pesky app..
If i were you, i would factory reset, even if you did successfully remove that app.

How to de install default radio app?

Hello, can anyone help me to uninstall the original radio application that the Chinese have installed, I bought a new better one, but it still starts automatically starting the old one, does not allow me to uninstall it, if you can help me with tips on how to remove it, or stop. This is multimedia with android 8.1
Default radio app is a preinstalled app on mobile devices. It can not in uninstalled or de installed but, it can be disabled. To do so follow the steps:
1. On open Settings.
2. Navigate to Apps or Manage Applications and select All Apps
3. Now, look for the apps that you want to remove.
4. Click on Disable.
5.Confirm when prompted.
nihitthakkar said:
Default radio app is a preinstalled app on mobile devices. It can not in uninstalled or de installed but, it can be disabled. To do so follow the steps:
1. On open Settings.
2. Navigate to Apps or Manage Applications and select All Apps
3. Now, look for the apps that you want to remove.
4. Click on Disable.
5.Confirm when prompted.
Click to expand...
Click to collapse
Unfortunately, the deactivation option is not active only forced stop I can press
Not Android Auto, requested mod moves to Android head units forum.

Categories

Resources