Related
As suggested, I have decided to make my own thread for the Cyanogenmod nightlies and other ROMs. It will make things a lot easier in the long run.
Disclaimer: as with the other Roms, Use at your own risk! Since the CM7 nightlies are basically an ongoing beta, you run the risk to brick your Gtab if you are not careful. Use to learn NxFlash first before attempting to flash ROMS. Also, do yourself a favor and get Titanium Backup! Always backup yours apps/settings and wipe data/cache/dalvik before flashing.
These will be using the bootloader's 1.2 Pershoot's kernel (2.6.32.43 / 1.4 ghz Kernel) for GB. This ROM works with the Gtab and should work with the ZPAD altough I have no confirmation of this yet.
Thanks goes out to: Team Douche/Cyanogenmod Devs for making a great ROM, Zyhong for showing me how to update to 1.2 and a few more tricks, Maxdamage for taking the time to compile the nightlies for 1.1 users, Pershoot for making such a great kernel and Roebeet for being the one that inspired me to take my journey down the Android rom lane.
Issues:
1) Once you set up DSPmanager, it force crashes.
1) Vanilla CM7 nightly (only vold.fstab was modified):
Latest build: Build 07262011 (Changelog)
2) Modified version of the ROM: CM7Tab build 07272011
Changes in modified version
1) replaced DSPmanager.apk with a previous version that is known to work (7.0.3) (if you open it, it FCs)
2) vold.fstab is setup as sdcard for internal storage & emmc for external card
3) using pershoot's 2.6.32.43 GB kernel for 1.2 bootloader (For more info, check his blog.
4) Read_ahead_kd increased from 128 to 2048.
5) Set up overclocking by default and battery saver script + cpu governors via userinit.sh (from Zyhong's ROM, based on Caulkin's scripts).
6) Replaced Camera libs & apk to stop the 8-bit pixelling.
7) Changed values for lowmemorykiller (07102011).
8- Increased dalvik.vm.heapsize to 64m (07102011)
9) Set some values to improve video playback (07272011)
RC1 version of the rom with changes: 7.1.0 RC1 with Pershoot 42 kernel
(Sorry if this is short but I will improve the thread as it goes)
To-do list:
1) remove some apks (such as Rom manager) & create a removed apks folder.
2) change the EMMC to Sdcard2
If you have suggestions/ideas, do not hesitate to share them.
reserved for future use
AS WE ARE REORGANIZING THE GTABLET FORUM - ALL ROMS/KERNELS/ETC WILL HAVE THEIR Q&A POSTS MOVED TO THE Q&A SECTION.
THE Q&A LOCATION FOR THIS ROM IS HERE
Thanks.
Introduction
Teamhacksung has been porting ICS (to be CM9) for the Galaxy S and Captivate we feel that it has reached a state where it would benefit from public testing. However this is still a very early versions and there will be bugs. Bug reports are allowed in this thread only. Please check the known issues section before reporting a bug. The most minor bugs are welcomed (we'd love to know them, but we may not fix them instantly).
Download
ROM: BUILD 17: tux-head.net / faramir.eriador.org / ics.haxer.org (md5: bcf40f901b2ae6d758b40ac8d43163c2)
Google Apps: Download from ROM Manager. (Or http://goo-inside.me/gapps/gapps-ics-20120213-signed.zip)
Google Apps Fixer: MultiUpload / tux-head.net / faramir.eriador.org (md5: af8bcaf5f8158e8e1be7097fc86b6b28)
Google Apps Fixer will fix your problem with not being able to add Google Account or Calendar Sync, but will also reset your Google Apps data. Only flash if you're having problems. If Google Apps Fixer does not work for you, do a factory reset from CWM (or Android Settings) and do not restore system data via TitaniumBackup.
Older Downloads
ROM
ROM: BUILD 16: haxer.org / eriador.org (md5: 4bcccf2f665988ab5bd40fa88b0f7621)
ROM: BUILD 15: Mediafire / haxer.org / eriador.org (md5: 7d1fbe508999cab6af5b831955a19a17)
ROM BUILD 14: faramir.eriador.org / tux-head.net (md5: 4ee4fd346b9f7ba22663ecc4a8ceb336)
ROM BUILD 13: faramir.eriador.org / tux-head.net (md5: 803f2612d272a1420362d3faddbb0327)
ROM BUILD 12: faramir.eriador.org / tux-head.net (md5: 9eb4952a7434bf6fc961edbdc8769062)
ROM BUILD 11: faramir.eriador.org / tux-head.net (md5: 64271bde12dc64b7c9ea316b7b4be86a)
ROM BUILD 10: faramir.eriador.org / tux-head.net (md5: 4ada7a9349da509f8a4936fb3d9ccb9a)
ROM BUILD 9: faramir.eriador.org / tux-head.net (md5: ad1b821950fa875e301a0fa7a177fd1f)
ROM BUILD 8: faramir.eriador.org / tux-head.net (md5: 119cc76944b938aeca47a2d9ffd142c9)
ROM BUILD 7.1: faramir.eriador.org / tux-head.net (md5: 491f0ae9324d20d4c4ef8cb7b6536219)
ROM BUILD 6: faramir.eriador.org / MultiUpload / tux-head.net (md5: 2fec3022f673af490f6c9535a677eaa5)
ROM BUILD 5: Multiupload / tux-head.net (md5: 0e8b66f9cdcbd58a5d0d6aa193af4edb)
ROM: BUILD 4: (Skipped on Captivate out of laziness)
ROM: BUILD 3: http://www.multiupload.com/L58EA8TWIC (md5: ecbe29d46af07b6030bb357aae87a11b)
ROM: BUILD 2: http://www.multiupload.com/Y26U8XXEXV
Google Apps
v7.1: MultiUpload / tux-head.net / faramir.eriador.org (md5: 8bf66137f18de45657f29c129a8f4d52)
v7: MultiUpload / tux-head.net / faramir.eriador.org (md5: 1888fbb15f36a076cb3908acaf1bd15a)
v6: MultiUpload / tux-head.net / faramir.eriador.org (md5: 6f51ded731d173c31b8c47395ca580b7)
v5.3: MultiUpload / tux-head.net / faramir.eriador.org (md5: e7d69d98a633b646e4f14e6a43208e66)
v5.1: MultiUpload / tux-head.net (thanks! Kaik541) (md5: 87415730a1db2e90d3588bc895f239e5)
v5: MultiUpload (thanks! Kaik541) (md5: 8667c9ddca581a98867fc02db29a2326)
v4: MultiUpload (thanks! Kaik541) (No longer include apps downloadable from Market.) (md5: 8b2dad009bc2f8724d27f78bca162495)
v3: internal
v2: MultiUpload (thanks! koush)
v1: MultiUpload (thanks! koush)
- First time flashing ICS to your Captivate (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Coming from another ICS build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Reboot into recovery and WIPE (wipe data/factory reset + wipe cache partition)
If radio doesn't work, go back to Samsung ROM and flash from there.
- Upgrading from another build of ICS by teamhacksung?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The upgrade process from CM7 to ICS is automatic, but downgrading from ICS to CM7 (or restoring Nandroid) requires flashing twice. Once from ICS and again from CM7's recovery.
Source
Kernel Source: https://github.com/teamhacksung/samsung-kernel-aries
Userspace Source: Patches are being integrated into CM's mainline tree. Device tree are available on teamhacksung's github, but may not be buildable. No support for the source code, do not post that you are not able to build it.
Known Issues
Camera does not support scene modes
Phone unnecessarily gets data connection on device encryption password enter screen.
Cannot format external SD *
Android OS battery usage display higher than normal.
Sometime wrong SMS selected for forwarding
Format internal instead of external SD when requested to format ext. SD
Transfer speed slows down when screen off
Screenshot shutter sound
TV Out using HW-decoding (probably won't be fixed)
Sim Toolkit (probably won't be fixed)
No camera focus mode setting
Compass doesn't work in Google Maps v6
Unable to dial "0001" in some regions
Slow USB transfer speed for some people
Camera still photos problem after recording video
Note: there are a lot of new options in Settings, but many of them are not implemented yet. DO NOT REPORT THEM AS BUGS. Additionally, some users has reported boot failure after disabling boot animation.
Empty wifi icon when using juice defender / sometimes on boot
Unused bottom bar in landscape dialer
Fixed Issues
BUILD 17
Top of widget selection selector says "Select screen lock" (Upstream fix)
Chrome not working
Various other upstream fixes
BUILD 16
Regression in BUILD 15: Superuser application crashes
Regression in BUILD 15: Data Roaming enabled by default
Back camera does not record geotagging
Camera crashes when changing resolution
New: WM8994 Extensions (aka "Voodoo Sound") is now configurable from DSP Manager
BUILD 15
Duplicate entries in MediaScanner (will only prevent new duplicates, need to clear data to get rid of old duplicates)
Regression in BUILD 14: Screen flicker while turning off
Regression in BUILD 14: adb turns off every reboot
Mute-unmute needed on some calls (hopefully)
Notification power widget uncustomizable (now integrated into Settings)
Reboot into recovery on crash (it will still reboot, just not into recovery)
Unreliable Wi-Fi on screen off (hopefully)
BUILD 14
Laggy video recording in low light
"sin" does not work in calculator in Spanish
Laggy playback of some video in .mkv container (same video works in the .mp4 container) (Recommendation: Dice Player from market. Does its own mkv extraction and has hw decoding support)
New Feature: Gamma tuning (equivalent to Voodoo Color's "v1 gamma hack")
BUILD 13
720p Video Recording laggy
No camera zoom
Timelapse video recording crashes
TV Out broken on sleep
TV Out black video
Broken encryption (regression in BUILD 11) (WARNING: users with already encrypted phone will have their data cleared (for real this time))
BUILD 12
Compass, accelerometer broken in certain apps
Random force closes (hopefully)
Missing camera touch to focus (thanks to havlenapetr)
GPS does not work (regression in BUILD 11)
Off-charging does not show progress
/datadata cache not cleared when space is low
Slow mass storage transfer speed
Automatic brightness not working
GApps v7.1
Network location broken
GApps v7
Market purchase broken
BUILD 11
Encryption not working without a data wipe (WARNING: users with already encrypted phone will have their data cleared)
Cannot authenticate new apps for root
Data sometimes get disabled on boot
GApps v6 / Face Unlock v6
Updated: based on IML74K
Face Unlock not working on BUILD 10+
BUILD 10
No hardware composition (but hardware acceleration works)
Video recording does not work.
Video playback is not hardware-accelerated.
Photo taking does not work with the front camera.
Some camera options FC. (The camera is a temporary hack, when the Nexus S ICS source is released, there will be a proper fix.)
Movie Studio does not work.
WiFi automatically turns on after quitting airplane mode if WiFi was used during airplane mode.
Data Roaming is enabled by default
Can select widget on launcher without being on the widget screen *
GApps v5.3
Updated: Market apk
Removed: unneeded GoogleLatinIME
BUILD 9
WPA Wifi Tethering broken (regression in BUILD 8)
Audio recording by android app crashes (phone calls still work) (regression in BUILD 8)
Phone crashes in landscape with T9 enabled
Reboot to recovery by default even though recovery not selected.
Slow T9 speed
CPU rarely scaling up to 1000 MHz
GMail sometimes fills up /datadata with attachments
BUILD 8
USB Tethering on Windows requires the user go to to driver update and manually select the RNDIS driver.
Sketchy wifi tether (breaks if data connection comes up while tether is active) (it will still error, but you can now re-enable it)
Mounting external SD via USB broke in BUILD 7
Cannot accept many file types via bluetooth
Data activity icon sometimes gets stuck even data is off.
New feature: T9 Dialing by devatwork (Enable in Dialer Setting)
BUILD 7
Cannot encrypt phone after restoring data.
Wi-Fi problems for Iran users
Market download temporarily goes to /datadata
Support for TV Out (in Galaxy S Setting application)
Screen appearing for a split second after screen off animation
BUILD 6
Persistent "Removed SD card" message on external sd card removal.
Missing library for Android Open Accessory
Support for USB Mass Storage (see FAQ)
BUILD 5
VPN does not work
Regression in device encryption
BUILD 4
Large photos cannot be edited.
Missing Live Wallpapers
Bluetooth Reverse Tether does not work
Wi-Fi Direct not supported (it's supported in settings now, but apps are needed to use it as ICS does not come with any use-case for Wi-Fi direct)
Sometimes wifi strength won't show after boot if wifi is enabled. Toggle once to fix. (fixed, hopefully)
GApps v5.1
GApps: Missing TTS libs
GApps v5
GApps: Missing Picasa Sync
GApps: Unable to purchase apps
Build 3
Device encryption does not work. (Note: temporarily broken again in BUILD 4, works on BUILD 5)
User does not have write permission for external sd
A2DP bluetooth headsets do not work.
GApps v4
GApps: More missing libs for GoogleTTS
Build 2
Superuser.apk does not open.
Installer does not work on Samsung ROMs.
Factory reset (from settings menu) does not clear /datadata.
GApps v2
GApps: Missing voice chat, maps, text-to-speech libraries
GApps: Android Keyboard appears twice in Settings.
Frequently Asked Questions
My calendar sync isn't working!
Install the latest build and gapps and gapps fixer. If it still doesn't work, wipe your data.
App X isn't working!
Check the list at http://forum.xda-developers.com/showthread.php?t=1402210 (unaffiliated with teamhacksung) first and check if it works on other ICS phones. Most likely, it's the application's problem, not ours.
Can I mount the phone as mass storage via USB?
Starting from BUILD12, mass storage is the default configuration (might not apply to existing installations). The below command can be used to change into USB Mass Storage mode. USB Mass Storage mode is always used in recovery.
Code:
setprop persist.sys.usb.config mass_storage,adb
If you want to switch to MTP mode use
Code:
setprop persist.sys.usb.config mtp,adb
Please reboot after executing the command.
I can't adb into the phone!
Please install Nexus S drivers from Google. (Or Galaxy Nexus's driver in MTP mode)
Can I flash other modems?
You may flash modem packages designed for CM7.
How do I take a screenshot?
The screenshot taking function is built into ICS. Hold volume down + power.
Can I use CM7 kernels?
No, the kernel has modifications to make graphics, camera, data counter and data limit work.
Can I disable LED Notification?
Yes. Untick Settings -> Display -> Pulse notification light.
Maps keeps asking me to sign in even though I'm signed in!
Ignore the sign in dialog and pull down the notification menu. Answer the request for permission. Do this a few times and Maps will work.
How do I enter Captivate Settings (Device Settings)?
Type "am start com.cyanogenmod.AriesParts/.AriesParts" from adb. Or starting from BUILD 7, it is available as an icon in your launcher.
How do I enter service mode?
Type "*#*#197328640#*#*" into the dialer.
Is there a Vibrant version?
We currently lack a developer/maintainer for Vibrant.
What's working? Why is there only a list of issues?
Everything else not listed are supposed to be working (aside from the usual CM7 bugs). If they're not listed, please post so that they can be added to the list of issues. A list of issues is far more useful from a development standpoint.
Why am I getting notified that my data partition is getting full when I have 1+ GB free?
Your /datadata partition, a smaller partition, is getting full.
IRC?
#cmsgs on freenode
Q&A Thread: http://forum.xda-developers.com/showthread.php?t=1367586
Also, there is an additional FAQ by XDA forum user everest.deth that might be useful if your question isn't answered above.
Thanks
syndtr: Updated touch and graphics driver
onecosmic: Being the first to successfully build the AOSP tree
Kaik541: Making GApps from v3 onward
ancdix: For hosting on tux-head.net
nikademus (_renaud_): For hosting on faramir.eriador.org
CyanogenMod team: Setting up the infrastructure and being a great help in the porting process.
and everyone else involved in this port or CM7 for SGS.[/QUOTE]
Reserved....
Wow, great news. Looking forward to trying this out!
Yes!
Sent from my SAMSUNG-SGH-I897 using xda premium
Thank You Very Much!!!
what does [ITl41D] mean in the title?
Wouldnt [CM9 beta] be more descriptive?
there are already 2 other ICS port threads.
huminahuminahuminahuminahuminahumina
TRusselo said:
what does [ITl41D] mean in the title?
I think [CM9 beta] would be more descriptive
Click to expand...
Click to collapse
It is not Cyanogenmod 9 yet so why would it be a beta. This is no even an alfa of CM9.
I'm definitely going to be flashing this today
Sent from my SGH-I897 using XDA App
That was fast! I look forward to trying it once it has some of the major bugs worked out. Thanks to teamhacksung for all the effort to get to this point.
Sent from my SGH-I897 using xda premium
TRusselo said:
what does [ITl41D] mean in the title?
Wouldnt [CM9 beta] be more descriptive?
there are already 2 other ICS port threads.
Click to expand...
Click to collapse
Its the build number. All AOSP builds have them.
Additionally, this isn't CM9 yet, it hasn't been merged.
Awesome, thanks!
What is meant by "lack of hardware composition"?
Sent from my GT-I9000 using XDA App
I have no idea what the difference between the two on-going ICS developments are but Pawitp did have a hand in developing the other version.
I have more confidence in trying this version knowing that Teamhacksung is behind it. Great stuff atinm.
Sent from my MIUI SGH-I896
zuN! said:
I have no idea what the difference between the two on-going ICS developments are but Pawitp did have a hand in developing the other version.
I have more confidence in trying this version knowing that Teamhacksung is behind it. Great stuff atinm.
Sent from my MIUI SGH-I896
Click to expand...
Click to collapse
Yeah I was wondering what was different about this version as well. Guess ill flash it in a bit and find out.
Sent from my SGH-I897 using XDA App
Tarima said:
Awesome, thanks!
What is meant by "lack of hardware composition"?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I would assume he means the fact that samsung never released the hardware source (the reason cm7 had poor battery life). But I would like to know for sure, too.
Tarima said:
Awesome, thanks!
What is meant by "lack of hardware composition"?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
mikel.canovas said:
I would assume he means the fact that samsung never released the hardware source (the reason cm7 had poor battery life). But I would like to know for sure, too.
Click to expand...
Click to collapse
Pretty sure it has to do with not having the correct libraries for the gpu, and therefore not having gpu acceleration in apps.
However, the Nexus S has the same gpu as us, so *hopefully* when ics for crespo drops, it'll just be a matter of using those libs.
I haven't flashed ICS yet, but it would be appreciated if someone who flashed the ICS rom from DemonWav's thread gave their thoughts on the two ICS roms out right now.
orlandoxpolice said:
I haven't flashed ICS yet, but it would be appreciated if someone who flashed the ICS rom from DemonWav's thread gave their thoughts on the two ICS roms out right now.
Click to expand...
Click to collapse
First thing I noticed is that network worked right away. None of those additional fixes needed. Will get back to you after some more time. For me A7 was laggy as hell
Update: After just 2 min, I can tell this seems like a much more mature port. Definitely smoother than A7
mikel.canovas said:
First thing I noticed is that network worked right away. None of those additional fixes needed. Will get back to you after some more time. For me A7 was laggy as hell
Update: After just 2 min, I can tell this seems like a much more mature port. Definitely smoother than A7
Click to expand...
Click to collapse
what other bugs do you found?
another thing, can we get a zip for the onscreen buttons?
Does this work with the cm7/miui kernels? i really want to use glitch thats why. thank you
Updated 03/14/2012 FrankenTAB v1.1.0
FrankenTAB aims to pick up where the gtab-devs left off with the Froyo based VEGAn-TAB 1.00 b5.1.1 (our v001a is a direct port of b5.1.1 to BL 1.2 with a clemsyn kernel). The current build is a heavily modified Brilliant Corners 1.3.1 base (advanced version of VEGAn-TAB 1.00 b5.1.1), with an overclockable (1.6ghz) & undervoltable kernel from the Clemsyn universal Froyo Skype Fix.
1) This MOD is based on Roebeets' Brilliant Corners ROM for the GTablet. See the description for Brilliant Corners for more info.
2) I am using the latest kernel and WIFI drivers (Skype/SOD/PPP fixes) from Clemsyn, all thanks for the speed of this ROM should go to him.... not me. This ROM is overclockable (to 1.6Ghz) and undervoltable via SetCPU (Get it from XDA if you are a member, or from the market if you want to support the developer)
3) Jcp171, Cobey, and Sharpe351 have been a huge help to me with FrankenTAB. Much thanks goes out to them for their continued help and support.
4) I got the blessing from GoJimi to include the newest version of VTL Launcher in our rom (v1.7.5 - This is NOT on the market yet). I would suggest that you drop in over at http://vegantab.gojimi.com/ to see what's going on with the OFFICIAL VEGAn-TAB ROM, which is based on GINGERBREAD, and show your support for further development of VTL Launcher by purchasing the release version from the Android Market or via a donation on the VT-Labs / VEGAn-TAB website.
INSTALLATION NOTES:
Before attempting to install this ROM, please understand how to use NVFlash (Roebeets thread) to restore your system should something go wrong.
You will ABSOLUTELY need to do a data wipe / factory reset with CWM BEFORE install. I also recommend formatting your sdcard and wiping the dalvik cache before install. my current procedure is:
1) NVFlash to version a 1.2 bootloader base image including CWM
2) Perform my wipes in CWM (data / cache / Dalvik / Format SD)
3) Mount the Tablet via USB from inside CWM / Copy all the needed files to the tablet
4) Install the Rom in CWM
5) Reboot
In more extreme cases a tougher wipe may be necessary:
0) MAKE BACKUPS OF WHAT YOU WANT TO KEEP
1) boot into CWM and format your sd card to 4096/0 then back to 2048/0 (this has cleared some of the problems for some people)
2) format dalvik cache
2a) -skip this step the first time you try, but it may end up being necessary- NVFlash back to a stock 1.2 setup that includes NVFlash (if you are on windows, I posted my NVFlash folder link (HERE) that has a few batch files for stock or CWM recovery)
3) wipe data / factory reset (in CWM)
4) -my method- format /system & /data (by doing this, it basically makes blank, formatted partitions)
4a) wipe dalvik cache again! especially if you let your system fully boot after the NVFlash - CLEAR THAT CRAP OUTTA THERE!!!
5) mount usb and copy over the zip file to the root of your internal sd card (which should be empty after part 1 - if not repeat step 1)
6) install zip from sd card
7) Reboot.
MAJOR RELEASE NOTE: The version 1.1.0 release is a full installation package with a completely new base. As such, please make a backup of your data just in case a full wipe becomes necessary during your upgrade process. I highly recommend a fresh start, but since we are upgrading the kernel, a wipe of the dalvik cache is mandatory at the very least.
APPLICATION COMPATIBILITY: KNOWN ISSUES as of release v1.1.0
(Thanks to Jcp171, Cobey, and EVERYONE for helping work through the app testing):
General Apps:
1. Market: Working properly with the standard market fix... slightly limited before the fix.
2. Skype: working. I have been using it for a while now and it seems to work like a champ.
E-mail:
1. Default E-mail: Works great, but being a non-Gingerbread ROM, Secure Corporate E-Mail setups may not work (Mine does not because of lack of appropriate security suppprt)
File Managers:
1. ES File Manager: Ran fine, was able to give file manager root. UPDATE: You can just long-press the STAR icon to get to the root directory. (THANKS bdds13!)
2. iFileManager: Works fine, but is just a basic file manager. For root access use ES file explorer or root explorer.
Utilities:
1. Anreboot: Fine for reboots, but DO NOT USE THIS TO REBOOT INTO RECOVERY. It will likely only ever reboot into recovery forcing you to NVFlash the device to get it working again.
Games:
1. Plants Vs Zombies: (Doesn't work)Loaded and got all the way into the first level but quickly crashed. Will crash at some point either loading or trying to play. At the most it's extremely unstable...
2. Gem Spinner II: Not functional
3. Game compatibility with several games improved (Cut the rope now works) by removing the undervolt and returning voltages to default levels (still at 1.6ghz). May vary tab to tab... (Note: Even lowering the speed to 1ghz did not change Plants vs Zombies or Gem Spinners non-functional statuses...)
Any other apps we tested worked. Please let us know if you find an app with a problem and we can make sure to confirm the issue to help Pix out.
CHANGELOG:
v1.1.0
- Based on Advent VEGA Firmware v1.10
- Kernel - clemsyn 2.6.32.9 (MM061 #128) - 1.6GHz OC/UV/SOD protection/Skype fix/PPP support
- Updated to latest Market (Google Play) along with some of the other Google Apps.
- New wallpaper
v1.0.9
- Updated Kernel to clemsyn 2.6.32.9 (MM061 #128) - 1.6GHz OC/UV/SOD protection/Skype fix/PPP support
- Build Prop tweaks.
- System tweaks
- This is a FULL install
- Final version to be based on Advent VEGA Firmware v1.09
v1.0.2
FT 1.0.2 with default kernel at 1.6ghz:
Smart Bench:4857/2263
Quadrant:3456
FT with NEW 1.6ghz SOD fix by Clemsyn applied
Smart Bench:5022/2381
Quadrant:3416
- ADB works fine
- Market still requires the market fix, but more apps show up now (back to the olympus settings)
- Revised graphics in framework-res.apk
- Incorporated build.prop tweaks by JCP and the rest of the community - THANKS FOR THE HELP
- Most other features from v1.0.0 remain the same in this release.
v1.0.1
- POSSIBLE ADB ISSUE - TO BE CORRECTED IN 1.0.2
- Incorporated build.prop tweaks by JCP and the rest of the community - THANKS FOR THE HELP
- Returned to the default android font
- Most other features from v1.0.0 remain the same in this release.
v1.0.0
- Incorporated the G-Sensor Fix to allow games and apps to read the orientation of the tablet correctly.
- Most features from RC1 have stayed the same in the OFFICIAL release.
- Added the most up-to-date (and working) version of the Android Terminal Emulator (by jackpal)
v1.0.0 RC1
- Reworked more icons - Icons were picked & modified from Froyo, GB, HC & ICS
- Added new basic boot animation
- Added new default wallpaper (working on a wallpaper picker app to include more)
v004b
- Replaced our custom launcher with VTL Launcher 1.7.5 from gojimi (thanks again)
- Removed ASUS Water LWP (was broken by skype kernel)
- Removed nexus prime bootanimation
- Minor Build Prop changes (still @ LCD Density of 160)
- Reworked framework-res.apk (thanks to the UOT Kitchen)
Reworked lock screen sliders
Reworked color scheme
Changed fonts for a different look
v004a
- Modified boot.img to fix install error that bdds13 was having (needs to be tested)
- Added new 2nd boot logo
- Added new bootanimation.zip (nexus prime - possible slowdown issue here)
- Minor Build Prop change to test market compatibility (olympus device prop - still @ LCD Density of 160)
DOWNLOADS:
Grab FrankenTABv110 FULL from HERE
If you try it out and it doesn't work or your house burns down, or your cat turns into a zombie, IT'S NOT MY FAULT!!!
FULL INSTALL - 130.07 MB DOWNLOAD
OLDER DOWNLOADS:
Grab FrankenTABv109 FULL from HERE
FULL INSTALL - 107.6 MB DOWNLOAD
Grab FrankenTABv100 FULL from HERE
If you try it out and it doesn't work or your house burns down, or your cat turns into a zombie, IT'S NOT MY FAULT!!!
Grab FrankenTABv101 UPDATE from HERE
UPDATE ONLY - REQUIRES v1.0.0 TO BE INSTALLED FIRST - 9.78 MB DOWNLOAD
Grab FrankenTABv102 UPDATE from HERE
UPDATE ONLY - REQUIRES v1.0.1 TO BE INSTALLED FIRST- 9.76 MB DOWNLOAD
SPECIAL ADDITIONS:
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB. UPDATE 02/08/2012 - This will be the new default kernel in the v1.1.0 release - all tests confirm this to be an excellent release from clemsyn.
Grab FrankenTABv001a from HERE
- v001a is based on VeganTAB 5.1.1 just ported to the 1.2 BL with clemsyns kernel and a market update. (Still seems to be fairly popular - I will continue to support v001a as best I can for those looking for the classic VEGAN experience on the 1.2 boot loader.)
SCREENSHOTS:
Work is coming along good on v1.0.2. I hope to have a release ready this weekend. This release will be very minor tweaks to some icons and graphics that were not receiving a lot of love from the community, along with some tweaks to the build prop.
In the next phase of testing I will be looking at kernel options including support for ppp in the default kernel, along with the possibility of an optional kernel or kernels. (will be v1.1.0)
Anyone that wants to test v1.0.2 I have uploaded a testers update HERE please be detailed in reporting any problems or new successes that are found.
Cool does camera or google talk work with camera?
Is this the full ? : FrankenTABv100.zip or is it this one FrankenTABv100RC1-full-install.zip
Thanks cant wait to try it
P.s Oh NVM i see its 2.2 none of the new Google apps will work thanks
Version 100 is the latest full file. version 100rc1 is the older release candidate.
no PPP support
Same like other ROM with clemsyn kernel
I try to use pppd (pppd /dev/rfcomm0 call xxx) but got message below
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check that
ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.
Any chance to compile kernel with PPP support ??
I can ask clem to compile me a custom kernel, but it may take a lil while. I had planned to ask for something custom from him anyway so I will toss that in too. I will post an update in the second post when I hear from him, so keep an eye out.
I have been running this since 1.0.0 and love it. This is the ROM I have settled on. After trying Gingerbread and HC, I came back to Froyo for estability and speed. Love the icons on the status bar (Home, back, menu). All acceleration works including HD video. Like I said, very smooth and stable. All the games also work with it.
Netflix, Flash, Skype work.
Just loaded up over flashback, no problems here. Running so great!!!
Sent from my SGH-T959 using xda premium
Excellent ROM
Love it!
I love it!
Are you considering changing the icons to ICS themed icons?
I may look into it for a future release, but right now I have to post the update (v1.0.2 is live) and try to confirm that, with the new kernel that clemsyn compiled for us, SOD issues are solved and SKYPE IS WORKING PROPERLY!!
watch the OP in the next few mins for the updates and details!!
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB
Download link is in the OP under SPECIAL ADDITIONS
why the hell i can't boot any rom , after installing flashback 10.3 ?!
You should NVFlash back to stock, and then try to install. Thats the best help I can give with the information you have provided.
Good luck. If that doesnt do the trick, let us know and we can try to work through it.
PixelRider said:
You should NVFlash back to stock, and then try to install. Thats the best help I can give with the information you have provided.
Good luck. If that doesnt do the trick, let us know and we can try to work through it.
Click to expand...
Click to collapse
thanks
i'll try it now
I hate to see someone get frustrated and give up. I hope it works for you this time.
PixelRider said:
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB
Download link is in the OP under SPECIAL ADDITIONS
Click to expand...
Click to collapse
Hi PixelRider,
I try pppd on 1.02 update but still got error message below
FYI, I'm trying to do DUN over bluetooth connection
I follow instruction at link here
http://forum.xda-developers.com/showthread.php?t=1406847
It works on cyanogen ROM which is based on gingerbread
But none of froyo based ROM works and always reported such error message
I attach chat binary for froyo which i compile in case somebody
want to try this
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check that
ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.
So far the ROM is great. I came from brilliant corners. My only issue is sometimes with flash, it's all blocky and distorted like a messed up NES cartridge.sound is fine.i fix it by full screening the flash video or changing the resolution, then back. Also, is there a DSP manager, or sound booster working in this ROM (for speakers, not headphones?) Thanks
Wifi can sleep when screen turns off?
Using 1.02 update, I notice also wifi never goes to sleep eventhough
I have setup wifi sleep when screen turn of in wifi sleep policy
Anybody experience the same?
evild said:
So far the ROM is great. I came from brilliant corners. My only issue is sometimes with flash, it's all blocky and distorted like a messed up NES cartridge.sound is fine.i fix it by full screening the flash video or changing the resolution, then back. Also, is there a DSP manager, or sound booster working in this ROM (for speakers, not headphones?) Thanks
Click to expand...
Click to collapse
I am looking into a DSP for later release.
dony71 said:
Using 1.02 update, I notice also wifi never goes to sleep eventhough
I have setup wifi sleep when screen turn of in wifi sleep policy
Anybody experience the same?
Click to expand...
Click to collapse
I will look into wifi sleep and let you know what I find.
Hi all-
I spent literally an entire evening and night pulling my hair out trying to get this thing to work. Turns out all it needed was the right combo of kernel + ROM. Here are some notes.
(sorry for the wall o' text...scroll to bottom for quick & dirty "TL;DR" instructions)
Current, working setup:
unter's "TF300T" kernel from here: http://forum.xda-developers.com/showthread.php?t=1892326 (use the zip attached to the first post that is named "TF300T.zip"
Deodexed stock w/root & busybox from here: http://forum.xda-developers.com/showthread.php?t=2033205 (second post)
Kernel notes:
I think the key for this to work is that the kernel needs to have the right devid for the usb-ethernet dongle. Unter's kernel made this change on 10/27 according to his changelog. I think the key part of these changes is detailed in the kernel module patches detailed inside the zip on this page: http://www.dlink.com/us/en/support/...-usb-2-fast-ethernet-adapter?revision=us_revc
For anyone who cares to look even deeper, I think the difference with the rev C1 kernel module source and the older ones is just the bits that identify the device as needing the asix.ko module. Here are some details: http://www.spinics.net/lists/netdev/msg210743.html
EDIT: Here is probably the real source of changes: http://grinkin.ru/dlink-DUB-E100.html (it doesn't appear that the rev C1 kernel modules from d-link's site will actually work... they don't actually contain the rev C1 vendor ID, etc.)
It'd be quite nice if all the kernel devs out there compiled that change into the kernels. I don't think its too big of a deal. Unter's commit for this change is here: https://github.com/untermensch/asus_kernels/commit/2e231ca50f32509a64b45eccd6c87f558c4a42b1 (it's literally 4 added to one file).
EDIT2: The above 2 patch sets (the grinkin.ru and the one unter made) are not identical. Unter's works, but it's basically telling us that the rev C1 is identical to the rev B. Not sure if making the changes from grinkin.ru would improve compatibility or performance.
ROM notes:
I first tried unter's cm kernel with the cm 10.0 stable release, but for some reason it didn't completely work. The usb-ethernet dongle was enabled and it showed up as eth0, but it was not automatically configured. I had to manually go into the terminal and run a "netcfg eth0 up" then "dhcpcd eth0" to make it get an address. Oddly, "netcfg eth0 dhcp" didn't work. I'm not sure why. After taking these steps in the terminal I could ping successfully and whatever else from the terminal. I could also browse the web from the browser, but I couldn't download files, download apps from the market I could browse the market though), or use gtalk or anything else. It turns out android/cyanogenmod wasn't detecting eth0 as an active connection to the internet (in fact, when clicking on the notifications menu it said "No Internet Connection". I'm not sure if this is due to unter's cm kernel using the 10.4.4.20 sources while his "TF300T" uses older sources or what, but it just wouldn't work.
Next I tried the unter's "TF300T" kernel with a ROM based on stock (I think it was surdu's Ultra Fast JB Overclock ROM). Worked and the usb-ethernet dongle was properly detected by android and I was able to use it to it's full capability.
In the end, I went back closer to stock, because all the themeing and stuff that goes into some of the ROMs isn't really my cup of tea.
TL;DR - To get the D-Link DUB-E100 Rev. C1 working, use a stock-based ROM and unter's "TF300T" kernel.
This is stackexchange issue I raised on this issue :
<a href="http://android.stackexchange.com/questions/171241/wifi-hotspot-timeout-setting-gone-in-nougat-7-0-7-1-but-timeout-has-not">
Wifi HotSpot timeout setting gone in Nougat 7.0 , 7.1, but timeout has not</a>; .
(answered only by myself).
I have observed, on receipt of my new AGM A8 QualComm 410 MSM8916 Android 7.0 phone , that the Wifi-HotSpot keeps timing out
after 2-5 mins . I am trying to connect my Linux 4.10 x86_64 host, using its iwlwifi driver, and wpa_supplicant + ISC dhclient, and it
does connect fine, for 2-3 minutes, but then the android phone (default DHCP router) stops responding to ping requests, and the
link is dead , until I bring the device down on the linux host & kill & respawn wpa_supplicant & dhclient . The script I use to do this
is attached. One weird thing is that even though the Android device stops responding to pings, it may still be passing pings through
to the WAN internet , so my script has to trying pinging an actual internet address like www.kernel.org (one of the few public IP
addresses left that respond to ICMP).
This is really nasty of Android Nougat, especially as the previous Android version I used on my old phone (4.2.2)
had a Wifi-HotSpot Timeout Options Settings dialog , which let you specify inactivity timeouts .
So I had to develop this complicated workaround where my 'network' init.d script does
PID_FILE=/run/wlan_ping_monitor.pid daemon /etc/init.d/wlan_ping_monitor.sh
which keeps the link alive.
I really need to root this phone, so I can install my own /etc/hosts file / ISC BIND9, fix this issue in /etc/default.hostapd.conf settings,
and maybe try to fix hostapd , & be able to view logs .
Any advice on how to create a custom recovery for this phone ? latest TWRP & CyanogenModROMs do not support it.
It looks similar to the WileyFox Swift , for which there is a lineageos 14.1 build . Should I try this ?
I am focusing on trying to build android & android_bootable_recovery and android_rooting_tools gitweb gits, & then build AOSP
& TWRP & a recovery ROM - any advice gratefully received.
This is linux kernel bug : https://bugzilla.kernel.org/show_bug.cgi?id=194931
and stackexchange issue: http://android.stackexchange.com/qu...ng-gone-in-nougat-7-0-7-1-but-timeout-has-not
The kernel could be responding better to the empty data frame sent by Nougat hostapd on ap_max_inactivity=300 timeout.
Also wpa_supplicant should be detecting the link has gone dead & re-initializing .