im in the process of installing my n7 in to my car. ive been reading where people are using Timur's kernel to get usb host. Im going to use my 3.5mm jack for sound but i trying to figure out can i use any rom with that kernel or do i have to use his rom? it will be a fixed installment. i wanna hook my external hard drive up for all my music. i know i need to get the y cable and a hub. do i need this to do OTG?
LINKS
1.http://rootzwiki.com/topic/37755-timurs-kernel-usb-rom-usb-host-power-management-usb-audio/
2.http://mehrvarz.github.com/usb-host-mode-power-management-nexus7/
Thanks in advance
eastside770 said:
im in the process of installing my n7 in to my car. ive been reading where people are using Timur's kernel to get usb host. Im going to use my 3.5mm jack for sound but i trying to figure out can i use any rom with that kernel or do i have to use his rom? it will be a fixed installment. i wanna hook my external hard drive up for all my music. i know i need to get the y cable and a hub. do i need this to do OTG?
LINKS
1.http://rootzwiki.com/topic/37755-timurs-kernel-usb-rom-usb-host-power-management-usb-audio/
2.http://mehrvarz.github.com/usb-host-mode-power-management-nexus7/
Thanks in advance
Click to expand...
Click to collapse
With the right app you can do OTG with nearly any rom. I'm wondering the same thing about using a differnt rom with this kernel. I'm not a big fan od Cyanogen
You dont need to use Timurs kernel for otg,there are apps for that.But if you want to host and charge or support for usb dac audio then its awesome.I wasnt a fan of CM roms until I installed Timurs USB ROM.
PS:if you want to run an external hard drive chances are you will need a powered one or a powered usb hub.It usually cant recieve enough power through otg.
Sent from my SGH-I927 using xda app-developers app
Related
Hi guys,
So i decided to Install a custom ROM and I settled on using Repencis 3.0 and it gave me problems at the start, but i worked out the kinks and then it worked fine. A few days later it stopped charging with the charger while it is on (so weird) only when it is offed or when it is connected to the PC via USB cable. It did not do that the first day i flashed Repencis and the only thing i can think of that i did was that i updated the battery chargeBAR line. I also installed a lot of apps an connected them to the SD via link2sd. Any suggestions as to what is causing this anomaly?
Thats mean ur usb port are broken believe me u must change ur usb port
sent from ussr v5prototype
evanlocked said:
Thats mean ur usb port are broken believe me u must change ur usb port
sent from ussr v5prototype
Click to expand...
Click to collapse
But it works on the PC
aizensama said:
But it works on the PC
Click to expand...
Click to collapse
Same like my problem before bro i repair my usb port and its done
sent from ussr v5prototype
Hi im trying to get my nexus to work with my xbox controller using the OTG cable but some reason it dnt work do i need to b rooted or is there any settings i need to have ticked ect to have it work. Any help would b much welcomed
As the title suggest, does this phone support it?
yes, "microUSB v2.0 (SlimPort), USB Host, USB OTG."
thanks.
Yup
Sent from my VS980 4G using Tapatalk 2
does this means the nexus 5 will support it? . NO, OK ill go cry in a corner now. :crying:
Darkestred said:
Yup
Sent from my VS980 4G using Tapatalk 2
Click to expand...
Click to collapse
I have an USB-OTG cord and am on scrosler's 10/7 stock rooted rom. I cannot get this function to work! Is there a driver/firmware/LG apk I need in order to make this function? Any help would be appreciated. Thanks.
EDIT: Tested on another phone and USB cord and drive work/can be read...is firmware/.apk available?
OTG working out the box
twocrows said:
I have an USB-OTG cord and am on scrosler's 10/7 stock rooted rom. I cannot get this function to work! Is there a driver/firmware/LG apk I need in order to make this function? Any help would be appreciated. Thanks.
EDIT: Tested on another phone and USB cord and drive work/can be read...is firmware/.apk available?
Click to expand...
Click to collapse
Nothing special need to get OTG working. I have ES File Explorer installed and it allowed me to play an HD movie from my OTG cable connected to a PNY USB 16gb memory stick.
Verizon G2 with update. Not rooted, yet.
Question I have is whether it can do USB-OTG and slimport at the same time. Anybody?
Hi guys
Since i have too less posts to post directly on Jamal's latest dev thread GE 4.4.2 rom
have a little problem
USB host is not working at all after this update, when connecting the usb cable with the stick there's no reaction at all
Was working fine on 4.3
Any help?
Thanks in advance!
timberlake88 said:
Hi guys
Since i have too less posts to post directly on Jamal's latest dev thread GE 4.4.2 rom
have a little problem
USB host is not working at all after this update, when connecting the usb cable with the stick there's no reaction at all
Was working fine on 4.3
Any help?
Thanks in advance!
Click to expand...
Click to collapse
try to turn android debugging on and off and use latest usb drivers cos some roms require latest drivers
Change cable change USB port change PC. Change phone
Sent from my X506-3G using xda app-developers app
aditya rathee said:
try to turn android debugging on and off and use latest usb drivers cos some roms require latest drivers
Click to expand...
Click to collapse
Usb debugging doesn't work
Hmm stupid question- how do i get the usb drivers for the phone's usb to work? (I mean i know about drivers for Windows etc..) Or should i connect it to the pc
grosmouton said:
Change cable change USB port change PC. Change phone
Sent from my X506-3G using xda app-developers app
Click to expand...
Click to collapse
It's not about connecting it to a pc,
When i connect a usb stick via a usb hoat cable it doesn't react at all
Cable is good
Phone is good
Rom?
Drivers? How?
timberlake88 said:
Usb debugging doesn't work
Hmm stupid question- how do i get the usb drivers for the phone's usb to work? (I mean i know about drivers for Windows etc..) Or should i connect it to the pc
Click to expand...
Click to collapse
i am telling that use latest usb drivers for windows brother
you can find them by google
Still doesn't work even if connected to pc and installed drivers
Sent from my GT-I9505G using xda app-developers app
Anyone??
Sent from my GT-I9505G using xda app-developers app
It seems that CM13 doesn't support OTG. The stock file manager won't see a thumb drive connected but ES File Explorer will. That's not the problem. The problem is that I want to connect an Xbox 360 controller but cannot. Anyone know what's the deal with cyanogenmod 13 and OTG support? How can I get this controller recognized?
Using a GS4 with Android M.
Don't worry, guys. No one on the CM forum had anything to say about it either. No one can explain why this Rom team simply refuses to implement or even explain what the problem is. Nothing left to do but ditch CM.
Use custom kernel with OTG support.
Sent from my ASUS_Z00A using XDA Labs
I have JDC CM13 and i can use OTG with stock file manager. But if i plug in USB drive for the first time, it asks me to format it. After that it works perfect
krasCGQ said:
Use custom kernel with OTG support.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
Do you have a kernel suggestion?
marko.dnb said:
I have JDC CM13 and i can use OTG with stock file manager. But if i plug in USB drive for the first time, it asks me to format it. After that it works perfect
Click to expand...
Click to collapse
I guess you didn't read my post very carefully. I need to be able to connect and use a game controller. OTG is more than USB drives.
Tommy807 said:
Do you have a kernel suggestion?
Click to expand...
Click to collapse
I don't know much about i9505's development...
Sent from my ASUS_Z00A using XDA Labs