Related
Hi Guys and Girls, I hope this is the right place for my question. Sorry if I sound like a 12-year old - my english is not really the best...
I own the Motorola Defy+, and I tried to get rid of motoblur. I installed SndInit 2.0, did a reboot, did a backup, did factory reset, wiped dalvik cache and picked the miui-rom I had previously placed on my SD. The installation went pretty good, my phone told me that it finished the installation and I did another reboot.
After the reboot I get the red M (default Motorola-logo just like before I was meddling around with the phone) but just for a very short period of time and then I get a black screen with white letters (slightly out of proportion) saying:
Bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to Program
Transfer Mode:
USB
When I remove the USB-cable the last two lines are replaced by:
Connect USB
Data Cable
Do you guys have any idea, how I could get MIUI, CM or anything else running on my phone again? I'd even be quite happy to have the stockrom running again, since a phone with ****ty motoblur is still better than no phone at all.
I'd be really grateful for any kind of help, thanks in advance.
The miui you installed was for defy or defy+? And , can you access to recovery?
Motorola Defy CM7 RC 1.5 OC 1GHz
You have forgot to do 2 things. this might be the problem .
Do:
1. Factory reset.
2. wipe data cache.
3. wipe dalvik cache.
4.install MIUI rom.
5. wipe once again data cache.
6. reboot.
If you can access recovery again . my guess you can..
Thank you guys for taking care of me!!
@LeonardoJegigzem
The MIUI is called miui-ger_DEFY_1.12.23_FULL_EN_DE.zip - it's for Defy but I've read in forums that it should run on Defy+ aswell.
@VoLtrex31
I can't access recovery (I'm assuming you're talking about the "push volume-down when blue LED turns on"-recovery?), the screen I described in OP appears right after the red-M shows up for the first time.
You are right, I didn't wipe data cache neither before, nor after the installation.
Thats not good.
Search in the forums for how to access the recovery via your computer..
This might be your only way.
Ask more forums for technical help since xda is not the best forum for asking for help.
because i am not an expert .
But don't worry i bet many people got that problem too so there is a solution .
at last you have stock recovery(i think)
to access it (on defy) ress and hold VOL DOWN and power button.
Than after(about 10 sec) you'll get an exclamation mark.
Now press VOL UP and DOWN at the same time and you can wipe data.
If phone boots up perfectly yo can reinstall 2ndinit.
If not.. i think that you have to flash the appropriate sbf via rsd lite.
buruss said:
at last you have stock recovery(i think)
to access it (on defy) ress and hold VOL DOWN and power button.
Than after(about 10 sec) you'll get an exclamation mark.
Now press VOL UP and DOWN at the same time and you can wipe data.
If phone boots up perfectly yo can reinstall 2ndinit.
If not.. i think that you have to flash the appropriate sbf via rsd lite.
Click to expand...
Click to collapse
Now that's great news - the folks at motorola seem to know that ppl want to avoid ****ty motoblur and **** up their phones so they built an easy way to rescue broken phones.
I will try that asap - right now I'm using an old sony ericsson Xperia X8 - want my Defy+ back!
Thanks buruss!
Hi guy,I know about what you talking.
1. everytime i stuck on "white letters" i recovered my defy+ with RSDLite and correct SBF file.
2. If you have 2.3.6 version of stock rom,miui or any common cm7 won't work - afaik. You must downgrade (somewhere is topic about it) or use cm7.2 or cm9
Sent from my MB526 using XDA App
mikrom.cz said:
Hi guy,I know about what you talking.
1. everytime i stuck on "white letters" i recovered my defy+ with RSDLite and correct SBF file.
2. If you have 2.3.6 version of stock rom,miui or any common cm7 won't work - afaik. You must downgrade (somewhere is topic about it) or use cm7.2 or cm9
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Yea, I 've been through the same today/yesterday, and after a lot of cursing I can tell you it is exactly like this T.T you have to re-flash the stock ROM 2.3.6 again, and then if you find a way to downgrade/install Miui-CM/basically anything than staying with the stock ROM, let me know! xD
Just relax, I'm telling you this because yesterday I could have killed a dragon with my bare hands, but a soft brick is NP, as long as RSDlite recognizes your phone you can always going back to safety, from what I've learnt hard bricking a Defy is veryveryvery hard, thanks/due to a locked boot loader
Hey Guys, first let me thank you! I'm feeling quite happy now knowing that I'm not the only one with this kinda problem and I'll try the RSDlite-rescue-mission in a few days.
Happy new year everybody!
mikrokosmonaut said:
Hey Guys, first let me thank you! I'm feeling quite happy now knowing that I'm not the only one with this kinda problem and I'll try the RSDlite-rescue-mission in a few days.
Happy new year everybody!
Click to expand...
Click to collapse
I guess it's inevitable, when you start trying this and that custom ROM, sooner or later you're going to screw it up xD but it's actually good when that happens, because you know 100% you can fix everything - you did it once, you'll do it again
Happy new year!
miui uses the 2.2 froyo as base, since all the defy plus have gingerbread miui wont boot, miui hve boot.img and davtree.img in the rom.zip, if you flashan old boot.img in to a newer defy plus with new bootloader(2.3.6) you get an error, ho to fix it, try deleting the boot.img and devtree.img from the zip and replace the 2.3.6 boot.img and devtree.img form 2.3.6 and add it to the zip( miui rom) and try to flash it again and see if it works
You guys are awesome! Phone is booting again
installed RSDlite 5.3.1
downloaded the latest .sbf for my phone and my provider
let RSDlite do its magic and now everything's working just fine.
Next thing to do - try again to get rid of motoblur!
It's not 100% true, I installed MIUI over my 2.3.4 Gingebread and it worked like a charm
Only problem is, I can't install it anymore now that I'm on 2.3.6, but 2.2 is not strictly needed, 2.3.4 worked as well
Hey, guys! I have the exact same problem. I tried to install a Galnet MIUI ROM over at galnetmiui.co.uk, and i messed it up. I didn't really know what i was doing. Perhaps i forgot to wipe cache after installation. Have the exact same error message as mikrokosmonaut.
I was running my mb 256 with android 2.3.6, as far as I know, i have to use RSD Lite to istall stock rom again. Where do I find the correct SBF? My phone was bought without a service provider subscribtion, so I have no clue where to find the right SBF. I have no objection against having blur on the phone.
Can anyone help?
hi guys!!
i've tried to install miui on my defy+ 2.3.6.. like i read on this thread i modified the .zip file changing the boot.img and devtree with the original one.
but mt defy can't boot.. stuck at motorola logo..
what can i do?? does anyone managed to install miui on a defy+ 2.3.6?
now i'm using cyanogen and it works fine, but i prefer miui
thanks!!
daede86 said:
hi guys!!
i've tried to install miui on my defy+ 2.3.6.. like i read on this thread i modified the .zip file changing the boot.img and devtree with the original one.
but mt defy can't boot.. stuck at motorola logo..
what can i do?? does anyone managed to install miui on a defy+ 2.3.6?
now i'm using cyanogen and it works fine, but i prefer miui
thanks!!
Click to expand...
Click to collapse
I don't think MIUI work on 2.3.6. you need CM7.2, or maybe some latest nightly version of MIUI
mikrom.cz said:
I don't think MIUI work on 2.3.6. you need CM7.2, or maybe some latest nightly version of MIUI
Click to expand...
Click to collapse
thanks for your reply! indeed i'm using cm 7.2.. it works pretty well, except some delays! never heard about miui nightly! i did a research on google but i couldn't find anything.. any idea??
thanks again!
hi again!
i was thinking.. you said miui shouldn't work on 2.3.6 and i guess you are right! so if i do the same thing i did (change the boot and devtree file in the latest miui.zip that is 2.3.7 if i'm not wrong) but using files from android 2.3.7?
maybe i try to explain myself better..
i make a nandroid backup of my cm 7.s2 which is 2.3.7.
then i change the files boot and devtree from cm 7.2 to the latest miui.
should it work? what do you think?
thanks again
Hi, folks! *GREAT NEWS!*
Some guys over at the devs section on the thread below have found a froyo sbf with bootloader 6 (the same as the defy 2.3.6 sbf)!!! This means we can use it to downgrade to froyo and install MIUI over it!
http://forum.xda-developers.com/showthread.php?t=1486731
I haven't tried it yet, but will flash later today or tomorrow. You should read through some of the posts and decide for yourselves if you want to try or not.
All the best!
-If I managed to help you in any way, please press the thanks button!
Hi everyone. I had a few questions about flashing new roms on my kindle and was hoping to get some help
1. If I flash a new rom, like cm7, will i need to use titanium back up to save my apps and data. I remember doing this when i flashed a rom for my phone.
2. will flashing to cm7 prevent me from receiving OTA updates that amazon sends out. They just recently sent one a few days ago and the update unrooted the kindle. I wanted to see if I this is something I would have to worry about if i flash to cm7
3. once i do flash to cm7 and say another rom comes out, can i flash straight to the new rom or do i need to flash back to stock then perform the flash for the new rom.. again i remember having to do this when i was changing roms with my phone.
4. does the battery need to be fully charged before flashing
5. If i flash to cm7 then want to go back to back up (amazon stock software with root and gapps) will this make me loose my root access and twrp 2.0
Thanks
babbabooey97 said:
Hi everyone. I had a few questions about flashing new roms on my kindle and was hoping to get some help
1. If I flash a new rom, like cm7, will i need to use titanium back up to save my apps and data. I remember doing this when i flashed a rom for my phone.
2. will flashing to cm7 prevent me from receiving OTA updates that amazon sends out. They just recently sent one a few days ago and the update unrooted the kindle. I wanted to see if I this is something I would have to worry about if i flash to cm7
3. once i do flash to cm7 and say another rom comes out, can i flash straight to the new rom or do i need to flash back to stock then perform the flash for the new rom.. again i remember having to do this when i was changing roms with my phone.
4. does the battery need to be fully charged before flashing
5. If i flash to cm7 then want to go back to back up (amazon stock software with root and gapps) will this make me loose my root access and twrp 2.0
Thanks
Click to expand...
Click to collapse
1. If you are coming from another rom, then yes. But if you are updating your CM7, then you should probably backup your apps
2. I have had CM7 on my Kindle for like 2 weeks, and have not received an update. So I don't think so.
3. Like I said above in number 1. For example: If you are coming from Cm7 and want to try to flash ICS, then you would first backup your system, then wipe system, data, cache and Dalvik-cache, just to make sure. But if whistlestop releases a new version of Cm7 that fixes the MAC adress, then you would boot into recovery, A backup is optional but is recommended., then wipe cache and Dalvik-cache only, then flash the updated rom on top of it.
4. It says that it is recommended to have a full battery, but I have not yet flashed a rom with a full battery, and I have not occured problems.
5. I think if you get an OTA update after flashing back to stock, then you will probably loose root access again and TWRP. But don't worry, after you get TWRP back, you will still have all your backups.
AWESOME! Thanks for all your help.
one more for you. so i just rooted and installed twrp and did a system back up. then i want to flash cm7. now i am running cm7 and decide to try ics so i do another back up before i flash to ics, will the cm7 override the original back up that i did before flashing cm7 or will i now have 2 different back ups i can restore if i wanted too.
babbabooey97 said:
AWESOME! Thanks for all your help.
one more for you. so i just rooted and installed twrp and did a system back up. then i want to flash cm7. now i am running cm7 and decide to try ics so i do another back up before i flash to ics, will the cm7 override the original back up that i did before flashing cm7 or will i now have 2 different back ups i can restore if i wanted too.
Click to expand...
Click to collapse
There will be 2 different choices when you go to restore. But the problem is that when you make 2 backups the same day, its hard to tell which is which. So when I make a backup I mount USB with the option and rename the 12-27-11... file to something like CM7-12-27 or something of the sort.
Sent from my LG-VM670 using Tapatalk
Thank you sir
Hey guys I'm new to Android in general so sorry if these seem like dumb questions. I've searched online for a while now and I can't really seem to get a concrete answer. Anyways so I got CWM 5.5.0.4 running on my 7510 just fine last night. I then did a backup of everything from within CWM 5.5.0.4. Then I went and flashed CM10 Jellybean to see if it worked fine. Went back to CWM and tried restoring back to ICS, to check that too and it worked fine. I want to mention at this point I couldn't get Titanium Backup or ROM Manager working from withint ICS at this point because it kept saying that it couldn't get root access (I rooted my 7510 through the method listed as a guide in the Developers section of this forum), but since I could restore back without a problem to ICS with all my settings intact, I thought I'd give it a try anyways.
I then flashed back to CM10, and upgraded to the newest CWM Touch version 5.8.x.x from within ROM Manager once in CM10. I then decided I wanted to go back to ICS so I tried to restore back to ICS through CWM Touch, and it didn't work. I’ve tried doing an entire normal backup, and then strictly the apps, nothing works. Keeps telling me there’s an error.
What’s the best thing to do? Switch back to 5.5.0.4? Can I do that without turning on USB debug mode? Because I didn’t check this beforehand but I can’t click on Storage in settings and even access USB period, whether it’s to transfer stuff or to turn on USB Debug mode.
Any help would be appreciated! I mainly want to go back because all my apps are setup the way I like in ICS. Unless someone knows away to restore apps properly back without going through CWM, maybe through some app that can read the backup data if that makes any sense?
HeyYoWL said:
Hey guys I'm new to Android in general so sorry if these seem like dumb questions. I've searched online for a while now and I can't really seem to get a concrete answer. Anyways so I got CWM 5.5.0.4 running on my 7510 just fine last night. I then did a backup of everything from within CWM 5.5.0.4. Then I went and flashed CM10 Jellybean to see if it worked fine. Went back to CWM and tried restoring back to ICS, to check that too and it worked fine. I want to mention at this point I couldn't get Titanium Backup or ROM Manager working from withint ICS at this point because it kept saying that it couldn't get root access (I rooted my 7510 through the method listed as a guide in the Developers section of this forum), but since I could restore back without a problem to ICS with all my settings intact, I thought I'd give it a try anyways.
I then flashed back to CM10, and upgraded to the newest CWM Touch version 5.8.x.x from within ROM Manager once in CM10. I then decided I wanted to go back to ICS so I tried to restore back to ICS through CWM Touch, and it didn't work. I’ve tried doing an entire normal backup, and then strictly the apps, nothing works. Keeps telling me there’s an error.
What’s the best thing to do? Switch back to 5.5.0.4? Can I do that without turning on USB debug mode? Because I didn’t check this beforehand but I can’t click on Storage in settings and even access USB period, whether it’s to transfer stuff or to turn on USB Debug mode.
Any help would be appreciated! I mainly want to go back because all my apps are setup the way I like in ICS. Unless someone knows away to restore apps properly back without going through CWM, maybe through some app that can read the backup data if that makes any sense?
Click to expand...
Click to collapse
Easiest way is to go back to the old cwm. The touch ver is a bit uggly according to me. (Personly i run Twrp tocuh recovery. Its nice and sleek. Gives option to compress backupps to. Includes a filemanager to. )
Otherwise if you install clock work mod from gogle play there is an option to restore apps from the backup.
Sent from my GT-P7500, JellyBean rom v6, A1 kernel v1.7 using XDA Premium HD
How exactly do I go back to the old CWM? Do I have to enable USB Debugging mode? As I mentioned I can't even do that because it's greyed out for me in CM10.
I dont know why usb debug is incheckable, i'm not a dev. But don't think it's important if you flash cwm via odin.
Use the same method you got cwm the first time.
Easiest is flashing it through odin. I guess you can follow that root guide you used initialy.
Rom manager can restore apps from backupfile. Just go deeper in menus.
Sent from my GT-P7500, JellyBean rom v6, A1 kernel v1.7 using XDA Premium HD
Hello there! I really hope you can help me with this, because I don`t have any other ideas or even the courage to try new ones. I recently bought a defy plus and after tens of pages read on the Internet about kernels, SBFs, ROMs and other android stuff I decided to start modding it. It came with a stock 2.3.6 Android, which I swapped for a ParanoidAndroid 2.14 (with Android 4.1.1), which I liked a lot, but I was quite laggy.
Then I decided to look for other ROMs and I wanted to install CM7. But here is my problem: I can`t. I tried to flash this file (cm-7.2.0-jordan), but it didn`t work. Then I had to flash a SBF to get my phone back. I think it was the wrong SBF (filename: JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTTR_P013_A013_HWp3_Service1FF.sbf) because it bricked ( hard brick, I couldn`t even start it), but luckly I had it fixed cause I still have my guarantee (which is a mistery for me, how did they do it? didnt they see it was rooted and this broke the terms of the guarantee?).
Anyway, they re-softed it and now I have a working phone. I rooted it, installed 2nd init and tried again. Now with a nightly version of CM7: cm-7-20130301-NIGHTLY-jordan. It still goes into a bootloop. I went through all the steps, root phone, install 2nd init, Wipe data/factory and Wipe cache and install from sd card.
My first and most important question is: do I have to be on stock android (meaning I have to flash the stock 2.3.6) every time I want to flash a custom ROM? Or can I be on, let`s say ParanoidAndroid, and change directly to CM10?
And my second question: How can I install CM7 for defy plus?
Thank you for your future responses.
Ok, I figured out the CM7 part, I think I was trying to flash a wrong nightly file. I got another one and I finally have CM7 on my phone. But, please, can someone give me an answer to my first question: For every custom ROM I install, I have to go back to stock 2.3.6 every time? Or can I flash, for example a MIUI, right now, on my CM7, without going back to stock rom?
No need to flash stock every time. Data should be wiped along with cache
Sent from my MB526 using Tapatalk 2
Hi,
I have latest Quarx 10.1 Rom installed on my Defy Green lens, and today after the battery died it fails to boot up just stuck on the CyanogenMod animation.
Has anybody had this problem or know how to fix it? It happened on an earlier nightly and the only way I could get the phone to boot again was to restore stock and re-flash CM. Wiping cache, data, re-flashing rom etc has no effect.
I really want to avoid restoring stock as it's a pain going through the process to get back to 4.2, plus I have texts/emails that I could do with keeping.
Any thoughts?
Cheers, Paul.
Also, I have been flashing my defy since cm7 and want to add my thanks to Quarx2k for all his work over the past couple of years! If it wasn't for his ROMs, I am pretty confident I would of binned this phone long ago! :good:
People who had this problem solved it by wiping data. I don't know how it didn't work in your case. Take a twrp backup and then start from sbf. Later you can restore your messages using nandroid manager.
Sent from my MB526 using xda app-developers app
Same issue
Hi All,
I am also facing the same issue.
Today My mobile battery drained out fully. After recharging it Its doing CyanogenMOD Circles.
I have Bootmenu only, no 2ndInit installed.
Please help me with this issue.
Regards
RK
RKANTH said:
Hi All,
I am also facing the same issue.
Today My mobile battery drained out fully. After recharging it Its doing CyanogenMOD Circles.
I have Bootmenu only, no 2ndInit installed.
Please help me with this issue.
Regards
RK
Click to expand...
Click to collapse
Go to recovery and format file system to ext4 ( u can use Aroma wiper & formatter 2.0.zip) and full wipe and install again. hope this helps .
--Hit thanks button if you want to.