I wish to update the recovery.img and boot.img on my new ideos x5.
Situation: After holding vol+ and power button, it come out the black screen with blue wording (3E version), then coonect the data cable to pc.
Problem: Windows explorer didnt show any removeable drive or asking install any driver, causing dont know how to replace the recovery and boot into the phone.
below is my phone detail.
Android version: 2.2.1
baseband ver: 129005
kernel ver: 5.6.32.9-perf
build num: U8800HV100R001C00B136
custom ver: CUTC38D001
Thanks for help
To go into bootloader mode, switch off the phone and hold VOL+,VOL- and Power. The screen should turn pink and you should connect the cable to see the //image location on the phone. Once the recovery.img is replaced, then remove the battery from the phone and to go into the new recovery, hold VOL+ and Power.
katu2006 said:
To go into bootloader mode, switch off the phone and hold VOL+,VOL- and Power. The screen should turn pink and you should connect the cable to see the //image location on the phone. Once the recovery.img is replaced, then remove the battery from the phone and to go into the new recovery, hold VOL+ and Power.
Click to expand...
Click to collapse
thanks very much. i have able to replace it.
thanks again.
Hi everyone,
I read all about this but not worked for me.
My motorola defy not go into recovery mode and bootloader do not, I tried all the tips in this particular topic -> http://forum.xda-developers.com/showthread.php?t=1065798 and others ... and nothing ...
I made a video trying to enter the bootloader and recovery mode ... follows -> http://www.youtube.com/watch?v=Cnof...xt=C320d15aUDOEgsToPDskJcSeRZyS4K6ks2H1YOYGqo
PLEASE HELP ME ...
If you see an m it's too late, try holding Vol up before inserting battery
Sent from my MT11i using Tapatalk
mpiekp said:
If you see an m it's too late, try holding Vol up before inserting battery
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
You are not doing it properly. First of all make sure your phone is powered off. Then press the vol up key and keep pressing it. Then press the power key. Do not relese the vol up key till you see the bootloader.
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
popcorn1122 said:
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
Click to expand...
Click to collapse
I try press vol- before put batery, before press power on, before insert charger... I try press vol + too ... and nothing
I tried the mokey method
when i put the charger does not show the battery charging screen appears only the M ...
Was it to heaven of cell phones?
Remove cable and battery hold down volume + insert battery press power on, your now in bootloader ,now you can release Vol up and insert cable.
Sent from my MT11i using Tapatalk
are your vol buttons working properly?
To use the RST, you must use the Vol + button. If done correctly the motorola logo will not appear.
popcorn1122 said:
are your vol buttons working properly?
Click to expand...
Click to collapse
All started when the Defy began to restart on the startup MotoBlur screen, I went into recovery mode (vol-) and restore the original settings, but continued with the same problem. I tried to install via RSD Lite the Froyo rom, the Defy booted and stopped on the screen where need to enter the MOTOBLUR account, but he came back to restart.
After I entered the bootloader (vol+) with the rom JORLA, started normally and the screen to set up the account MOTOBLUR he restarts (again) with the same problem. I removed the battery to enter the bootloader to put Froyo rom again but no longer entered the bootloader, I tried the recovery menu and also failed. I put the charger and nothing, stay on the screen with the M in the center, it blink and does not leave him, I put in the USB but a white light turn on and the computer does not recognize anything.
I don't know what I do.
Sorry for my english ...
Daniel
popcorn1122 said:
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
Click to expand...
Click to collapse
I've a similar problem on a NEW Motorola Defy...
...can't go in Bootloader!!!
I've pressed Power and Vol+ BEFORE insert battery and doesn't work!
Recovery Mode works but I can't use RSD Lite to flash (is possible without recovery???)
My phone is a Defy Mini with red lens, 600 MHz CPU (so it isn't a Plus) and 1700mAH battery (like Plus?).
Is a italian phone branded by TIM (Telecom Italia Mobile), maybe they made some "lock"?
try this:
start and set RSDlite with your favorite sbf
than conect the phone in OFFMODE
if the RSDlite see your phone (something like this"S Flash 3630)
start flash the sbf
if not, try to charge the battery(could be empty) and try again
if even so RSDlite not see the phone NOW you have a problem
good luck
vaserbanix said:
try this:
start and set RSDlite with your favorite sbf
than conect the phone in OFFMODE
if the RSDlite see your phone (something like this"S Flash 3630)
start flash the sbf
if not, try to charge the battery(could be empty) and try again
if even so RSDlite not see the phone NOW you have a problem
good luck
Click to expand...
Click to collapse
Doesn't works BUT works when phone is ON (really really strange) and RSD reboot phone in flashmode, showing this:
MBM Flash-mode.
TinBoost
version: 01.0a
Bootloader USB Init SECURE BOOT ENABLED
Trying to flash DEFYPLUS_U3_4.5.1-134_DFP-231 but after preparig file it say:
Failed flashing process. Phone (0000); Error sending RAM download for bootloader. Device API Error: 0xE0020083 Adress: 0x82000000 Command: ADDR (0xE0222083)
---------- Post added at 01:22 PM ---------- Previous post was at 01:05 PM ----------
Sorry, it say XT320, I think it's a Defy MINI.
No way?
Divino said:
Doesn't works BUT works when phone is ON (really really strange) and RSD reboot phone in flashmode, showing this:
MBM Flash-mode.
TinBoost
version: 01.0a
Bootloader USB Init SECURE BOOT ENABLED
Trying to flash DEFYPLUS_U3_4.5.1-134_DFP-231 but after preparig file it say:
Failed flashing process. Phone (0000); Error sending RAM download for bootloader. Device API Error: 0xE0020083 Adress: 0x82000000 Command: ADDR (0xE0222083)
Click to expand...
Click to collapse
what phone you have?
did you flash before that an sbf for other device?
edit:
whay you try to put on xt320 an sbf for defy+?
you need a sbf for your tipe of phone
search here http://forum.xda-developers.com/showthread.php?t=1787152
vaserbanix said:
you need a sbf for your tipe of phone
search here http://forum.xda-developers.com/showthread.php?t=1787152
Click to expand...
Click to collapse
Yes, I was thinking it was a Defy...
...some of this roms is rooted?
;_(
Divino said:
Yes, I was thinking it was a Defy...
...some of this roms is rooted?
;_(
Click to expand...
Click to collapse
i dont know!
i have defy mb525
you can look here too http://www.motorola.com/Support/US-EN/Country-Selector/XT320-DEFY-MINI
My precious DEFYred cm10JB.Quarx powered by JellyX kernel
system format
Hi!
Sorry it's my first question here on XDA forum.
I have a Defy with CWM, and Stock ROM. Can I use format system partition, and then flash a Custom ROM from a zip file in CWM? Or should I use just wipe data/cache, then flash a Custom ROM? Which is better?
Thanks
danee91 said:
Hi!
Sorry it's my first question here on XDA forum.
I have a Defy with CWM, and Stock ROM. Can I use format system partition, and then flash a Custom ROM from a zip file in CWM? Or should I use just wipe data/cache, then flash a Custom ROM? Which is better?
Thanks
Click to expand...
Click to collapse
First: You posted in wrong thread, this thread is only for that defy's not going in locked on M logo and no recovery & bootloader. 2nd: You don't need to format system rom, because cwm wipe it while flashing ROM zip. Just wipe data/cache/dalvik and you'll fine.
Has anyone saved this problem ? i`m into the same situation...
Try monkey method - hold volup + power and when insert battery. Helped for me once. If this method will not help try this - 1.remove phone battery from defy, 2.plug charger to socket ,but not in the phone, 3. Holding volup button plug charger in phone without battery, 4. It should enter in bootloader but with blinking VATTERY LOW. CANNOT PROGRAM, 5. put battery in phone, 6. Reflash with rsd lite. If above metods not helping - still moto logo - mainboard fried, when only one solution - service center. Good luck. :thumbup:
Sent from my MB526 using xda app-developers app
popcorn1122 said:
are your vol buttons working properly?
Click to expand...
Click to collapse
how can i know ?
tnx.
hello,
yesterday i was changing the rom of my u8800 and that it give me an error. i've tried to do the recorevy and it restarted.
now when I turn on my cellphone does not pass logo huawey. i've tried to put it on recovery mode (vol up + vol down and power) it stays on pink screen. when i turn the usb cable my pc doesn't have the drivers.
i've tried to search the drive in web without sucess.
can somebody help me?
Mrxavier said:
hello,
yesterday i was changing the rom of my u8800 and that it give me an error. i've tried to do the recorevy and it restarted.
now when I turn on my cellphone does not pass logo huawey. i've tried to put it on recovery mode (vol up + vol down and power) it stays on pink screen. when i turn the usb cable my pc doesn't have the drivers.
i've tried to search the drive in web without sucess.
can somebody help me?
Click to expand...
Click to collapse
Vol down + Vol up + power is for pink screen.
To go to recovery:
Vol up + power
Then you can install a rom for your sd card.
rqmok said:
Vol down + Vol up + power is for pink screen.
To go to recovery:
Vol up + power
Then you can install a rom for your sd card.
Click to expand...
Click to collapse
Heavier brush official firmware!
That's so helpful atleast I got into recovery mode after 2 weeks of pain. Power+vol up is the answer. Now my question is what rom do I flash.... can official 2.3gingerbread work?
Sent from my U8860 using xda app-developers app
Hello Guys!
My girlfriend's brother bricked me girl's U8800, and now i'm trying to solve the problem.
I searched all the forum for someone with the same problem, but i couldn't find one with the same problem.
The phone absolutely dosn't turn on, not even a logo, screen brightness, pink/blue screen, nothing.
Does someone have a possible solution for that (I am thinking in pushing the sistem over ADB, but dont know how), or the phone is dead?
Hi, you can try pull out the battery and connect the phone to pc via usb. maybe phone turn on.
sorry for my bad english.
Not dead!!! download b518 gb or froyo stock rom. extract zip or rar. "dload" put mount sdcard. pres volume down volume up power key automatic install. you must flash custom roms because have touch screen issue.FOR B518 Gingerbread: download u8800 usb driver in computer and install driver. download 5.5.0.4 recovery.img from computer 1 out sdcard. 2 out battery, again put battery.now again pres volume down volume up power key for pink screen. Usb capable put computer and put u8800. on computer move recovery.img put folders in "cust-backup". out usb capable. again out battery and put battery.now pres volume up and power button for recovery screen. again put sdcard. copy custom roms in sd card. yeah now you can flash custom roms
sorry for my bad english
cobramax said:
Not dead!!! download b518 gb or froyo stock rom. extract zip or rar. "dload" put mount sdcard. pres volume down volume up power key automatic install. you must flash custom roms because have touch screen issue.FOR B518 Gingerbread: download u8800 usb driver in computer and install driver. download 5.5.0.4 recovery.img from computer 1 out sdcard. 2 out battery, again put battery.now again pres volume down volume up power key for pink screen. Usb capable put computer and put u8800. on computer move recovery.img put folders in "cust-backup". out usb capable. again out battery and put battery.now pres volume up and power button for recovery screen. again put sdcard. copy custom roms in sd card. yeah now you can flash custom roms
sorry for my bad english
Click to expand...
Click to collapse
The phone absolutely dosn't turn on
Ax1qwer said:
The phone absolutely dosn't turn on
Click to expand...
Click to collapse
Hmmmm jtag required or usb jıg
maybe this help you : http://forum.xda-developers.com/showthread.php?t=1705996
So could anyone recover their phones from hard brick?
luis_decker said:
Hello Guys!
My girlfriend's brother bricked me girl's U8800, and now i'm trying to solve the problem.
I searched all the forum for someone with the same problem, but i couldn't find one with the same problem.
The phone absolutely dosn't turn on, not even a logo, screen brightness, pink/blue screen, nothing.
Does someone have a possible solution for that (I am thinking in pushing the sistem over ADB, but dont know how), or the phone is dead?
Click to expand...
Click to collapse
It seemed perfectly dead.
How about consult to huawai or buy newer one.
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
mayank88288 said:
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
Click to expand...
Click to collapse
You can find link in this thread:
http://forum.xda-developers.com/showthread.php?t=2409681
Good guide
Sent from my U8800Pro using XDA Premium 4 mobile app
sajmons said:
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
Click to expand...
Click to collapse
i'm using u8800 pro.i installed CM10.2.but wifi is not working on my phone and gapps also not working.....pls help.....