Database Users

[Redmi Note 3 [Mediatek] - Dead Phone - Solved - Guide]

Hi,
For all those who have a dead Redmi Note 3 and not beed able to recover it yet, here is a simple guide which I have tried many times to bring life back to my RN3. Well, the solution is simple. I am using Win 7 64 bit edition.
First, use the SP-Flash-Tool-v5.1532.00 and install the latest stable fastboot ROM, but remember to "ENABLE" the first preloader option in SP Flash tool. When it is finished and you seen GREEN Mark in the end, Try to boot your phone by pressing power button for 10 seconds. If it boots, no need to go to next step. But if nothing happens, go to Next step.
Now download SP_Flash_Tool_exe_Windows_v5.1516.00 and install the same fastboot ROM, but remember, this time "DISABLE" the first preloader option in SP Flash tool. When it is finished and you seen GREEN Mark in the end, Try to boot your phone by pressing power button for 10 seconds. Your phone must vibrate and power ON after some seconds. Thats it. Here are some imp links if needed.
1. Install drivers and restart PC
https://mega.nz/#!DtIhzSiD!qLmplkvEQ-ZSegaGbpyMuzH198b90joNhkPkJa6hzWg
2. Download or use a OFFICIAL AND STABLE FASTBOOT ROM
http://bigota.d.miui.com/V7.1.6.0.L...HNCNCK_20160107.0000.12_5.0_cn_434e06a8a9.tgz
http://www.mediafire.com/download/zcc0vzca9o1xt5d/SP_Flash_Tool_v5.1532.zip
https://www.mediafire.com/?tpjg4jtdf7sj40t (SP_Flash_Tool_exe_Windows_v5.1516.00)
Thanks and courtesy of jamflux
http://en.miui.com/thread-221115-1-1.html

will this work dead phone bricked because of official update MIUI 7.1.13.0 LHOCNCL

vkeymi3 said:
will this work dead phone bricked because of official update MIUI 7.1.13.0 LHOCNCL
Click to expand...
Click to collapse
I hope it will work on any RN3.

Can I do the same for Redmi Note 3G?

Broken Link
Hello
The mega link doens´t work
Thanks

Leyrio said:
Hello
The mega link doens´t work
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347767433

redmi note 3 dead
My Redmi Note 3 (Mediatek), by mistake I erased completely using SPflash tool in "format all" mode.
now its not turning on (DEAD).
Symptoms:
1. Red light for first few minutes while charging after that red light goes off.
2. when red light turns off, my PC detects phone for a second.
3. Mediatek COM port goes on and off for few seconds.
Whats next?
can I recover my phone in this condition?
if yes then how?
how to deploy bootloader/Fastboot?
how to deploy ROM on this device?
are hennesey correct ROM for mediate device?
can I do the above procedure with my phone?

Thanx Dear
Its Working ..Lots Of Thanx:good:

use SP flash tool SP_Flash_Tool_v5.1728_Win
check preloarder
WORKK 100000%

woprex said:
use SP flash tool SP_Flash_Tool_v5.1728_Win
check preloarder
WORKK 100000%
Click to expand...
Click to collapse
its work.. thanx a lot.. :good::good::good::good::

May I know how long is the process? I waited for 15 mins and nothing happen, no "green" bar..

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​

Allah Apnake er chay uttom bodla dan koruk vai

Lg g2 completely dead (not detecting device as qhsusb_bulk)

is my Lg g2 completely dead
1) Lg logo is not coming(COMPLETE BLANK SCREEN)
2)unable to enter recovery mode
3)unable to enter download mode
4)not detecting device as qhsusb_bulk
5) when connected to computer a popup message(you need to format the disk before using it) and it is showing total 13 drives in which one drive has the image folder.
it is working fine until today afternoon when i rooted my phone running on stock lollipop with LG_One_Click_Root_by_avicohh and installed twrp recovery using autorec app and after that rebooted phone but it is not rebooted and above problem came . dont know whats went wrong with this process
please help me with this

krnkrsadula said:
is my Lg g2 completely dead
1) Lg logo is not coming(COMPLETE BLANK SCREEN)
2)unable to enter recovery mode
3)unable to enter download mode
4)not detecting device as qhsusb_bulk
5) when connected to computer a popup message(you need to format the disk before using it) and it is showing total 13 drives in which one drive has the image folder.
it is working fine until today afternoon when i rooted my phone running on stock lollipop with LG_One_Click_Root_by_avicohh and installed twrp recovery using autorec app and after that rebooted phone but it is not rebooted and above problem came . dont know whats went wrong with this process
please help me with this
Click to expand...
Click to collapse
you have to open it. 100% refurbished phone

Thanks bendor_007 for reply. but my phone is not refurbished and it is almost 3 years old with good working condition. when it is disconnecting from desktop some amount of light coming from top of screen for 1 or 2 seconds. do you think i have to follow http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
please reply me.but how to know whether it is stuck at boot logo or not
once again thank you very much

Could you please try to record it? Short video or describe in more detail? Also try looking up device manager while connecting the phone. + what variant.---ignore pls, I haven't seen it's showing the drives
Just ise srk tool which will fix the issue
Sent from my SM-G930F using Tapatalk

Thanks again bender_007 . please find below attachments for more details about showing drives before and after connecting to computer and for device manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 3856857
and please find this https://youtu.be/7fZzK4czzgs video for the problem described by me in last post and
i am using lg g2 d802 international version

Huawei p8lite ALE-L21 total hard brick or can fix?Tried all solutionsns..pls help.

Hi.
I tried to update my mother in law Huawei p8 lite,phone in settings showed there is a firmaware update available,so I done a backup then download via wifi android 6.0,after download complete its asked me to procced so i click to yes,phone restart to upgrade mode but was stuck on 0% progress for very long time so I tried to restart the phone via power off button but after that phone doesnt start again any more.
So I readed a lot what to do but nothing work for me.
I download android 6.0 to pc then copy dload folder to sd card,then when card in phone I pressed volume + and - and power the same time but nothing happend,phone just vibrate once for very short time and nothing.
I tried also using adb procedure but phone is not recognized in my laptop with windows 8,all drivers installed I believe,I have mined all internet for proper drivers,all adb and fastboot drivers installed,included huawei drivers and HiSuite softaware and even Handset WinDriver installed and windows 8 only seen device like on picture below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plugged phone to laptop via usb cable,short vibrate and nothing,so I press power off and volume down same time and laptop see something but not properly,please check below:
ADB not seen any adb device after command "adb devices" .
I can manulally choose driver for that like e.g ADB interface device but ADB still not see anything.
Tried also with disconnected battery couse read on this forum its help sometimes but nothing,still same.
After doing all that just realize sometimes red led blinking so its mean battery is down,and wont charge via usb on the phone,so I charged battery via external charger connected straight to the wires on battery,now red led not blinking.
Tried also on another laptop with windows xp,same ,nothing happend,adb not see anything,but sometimes in device manager phone is recognized as below:
On other forum when is recognized like that its possible to fix but need special usb box,which I ovcourse dont have.
What else I can try?
Summary:
phone not recognized in laptop,even with unplugged battery
phone wont start,no logo nothing
wont update from sd card wiht dload
is it totally brick?
pls help/

Hi!
i think your phone board was damage in process, happened to me on a Alcatel Idol... The same thing. I think the phone was already a bit laggi, no?
.

Phone was not worked properly,thats what my mother in law said.
Its sometimes show just white screen after unlock,or camera wont switch on.
And battery draining fast.I thought firmware upgrade will fix it but its brick now(

Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.

alsat1 said:
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
Click to expand...
Click to collapse
It would be useful if you did a little tutorial with links.
Thank you

MARCOSOFT said:
It would be useful if you did a little tutorial with links.
Thank you
Click to expand...
Click to collapse
I found informations and tutorial on xda forum so its all here

alsat1 said:
I found informations and tutorial on xda forum so its all here
Click to expand...
Click to collapse
Did you have to pay for the phoenix software?

MARCOSOFT said:
Did you have to pay for the phoenix software?
Click to expand...
Click to collapse
Yes 15 euro for 72hours.

My Motorola Droid RAZR M

My device will only boot up when it is connected to a power source and after a few minutes of being plugged up it will stop charging and turn on
I recently flashed my device and after flashing, the touch screen will not work.
I have been trying to fix it for a while but I think the problem is i cannot get it to charge at all, so if anyone knows how to make it charge without booting up, please let me know and what i am trying to do is use fastboot to flash another rom that works on my device but i can't because it says Low Battery is this why?

Cwimm said:
My device will only boot up when it is connected to a power source and after a few minutes of being plugged up it will stop charging and turn on
I recently flashed my device and after flashing, the touch screen will not work.
I have been trying to fix it for a while but I think the problem is i cannot get it to charge at all, so if anyone knows how to make it charge without booting up, please let me know and what i am trying to do is use fastboot to flash another rom that works on my device but i can't because it says Low Battery is this why?
Click to expand...
Click to collapse
try
Booting from AP fastboot to charging mode
If the Device will only boot to AP Fastboot and it says Battery Low
Connect the phone/Device ato a Wall Charger (not PC)
-In AP Fastboot Mode hold Volume down& power buttons at the same time for +10 seconds
- When screen goes black...release power button
-Then IMMEDIATELY press and hold Vol - and Vol+ to boot to Boot Menu.
- In Boot Menu scroll down with volume down to BP Tools, press volume up to select
- Device should boot to Charging Mode with battery icon
- Once battery is charged, try flashing in AP Fastboot again
This will only work if battery charging Firmware is still preset and not corrupted
If Motorola Device will not boot to Charging Mode, a Fastboot cable will be needed.
What is a Fastboot Cable
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and low battery options in
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my Gemini 4G using Tapatalk

Galaxy Tab S5e - in bootloop - help needed

Dear crowd, I need support with my Samsung Galaxy Tab S5e/SM T-725 (it is my first Samsung device).
I unlocked it and tried flashing it (with Odin3). This was not successful and now I do not manage to get the device to boot into the Download Mode anymore.
The device does not switch on anymore - only with charging cable connected. In this case it turns on and off eternally showing the below screenshot.
Connecting a USB-C cable while pressing combinations of Power+ any volume key combination does not lead to any result. Only pressing Power+VolumeUp+VolumeDown brings is for a little moment to the screen where I chose to unlock the device, bot after one secons it turns off again being in bootloop subsequently.
SmartSwitch as indicated on the screenshot below does not do anything as the device is constantly turning off again.
Does anyone have a clue how to convince the device to finally allow me flashing TWRP and a custom ROM in this situation?
Advice is more than welcome!.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ralxx said:
Dear crowd, I need support with my Samsung Galaxy Tab S5e/SM T-725 (it is my first Samsung device).
I unlocked it and tried flashing it (with Odin3). This was not successful and now I do not manage to get the device to boot into the Download Mode anymore.
The device does not switch on anymore - only with charging cable connected. In this case it turns on and off eternally showing the below screenshot.
Connecting a USB-C cable while pressing combinations of Power+ any volume key combination does not lead to any result. Only pressing Power+VolumeUp+VolumeDown brings is for a little moment to the screen where I chose to unlock the device, bot after one secons it turns off again being in bootloop subsequently.
SmartSwitch as indicated on the screenshot below does not do anything as the device is constantly turning off again.
Does anyone have a clue how to convince the device to finally allow me flashing TWRP and a custom ROM in this situation?
Advice is more than welcome!.
View attachment 5423645
Click to expand...
Click to collapse
This warning screen is still download mode. Try flash stock rom via Odin.
Chosse exact firmware, when start flashing you will see the white bar below that text.

Unfortunately, it does not work as the device switches off too quickly. Odin3 then just reports failure.
I wonder if there is a way to prevent the device from switching off so quickly.
dangtoi1993 said:
This warning screen is still download mode. Try flash stock rom via Odin.
Chosse exact firmware, when start flashing you will see the white bar below that text.
Click to expand...
Click to collapse

ralxx said:
Unfortunately, it does not work as the device switches off too quickly. Odin3 then just reports failure.
I wonder if there is a way to prevent the device from switching off so quickly.
Click to expand...
Click to collapse
so sorry, mine stuck at warning sreen so i can easy flash back.
If your tab fast switches off then maybe it got bootloader damaged, you need research flash by Qualcomn flash tool like QFIL, flashsing for Qualcomn chipset device when it in QDLoader 9008 mode.