Related
I have Samsung Galaxy 2
I have custom ROM (Dark Knight V2) installed so
After installation screen does weird
I see the keyboard background, logo splash screen, different colors
........
After this problem I am back to stock ROM was not helped
what is his problem and how do I turn back
Please help me
serkonl said:
I have Samsung Galaxy 2
I have custom ROM (Dark Knight V2) installed so
After installation screen does weird
I see the keyboard background, logo splash screen, different colors
........
After this problem I am back to stock ROM was not helped
what is his problem and how do I turn back
Please help me
Click to expand...
Click to collapse
Did you wipe data and dalvik cache or did you just flash?
Did you flash via CWM or Odin?
I've tried everything
serkonl said:
I've tried everything
Click to expand...
Click to collapse
Surrreeee you have...
IF WE ARE TO HELP YOU MAKE A LIST OF EVERYTHING U HAVE TRIED... (caps for truth)
serkonl said:
I have Samsung Galaxy 2
I have custom ROM (Dark Knight V2) installed so
After installation screen does weird
I see the keyboard background, logo splash screen, different colors
........
After this problem I am back to stock ROM was not helped
what is his problem and how do I turn back
Please help me
Click to expand...
Click to collapse
What do you mean? Could you capture and upload a photo of it?
My S2 is running the new check rom and it works well
Sent from my GT-I9100 using xda premium
You have given us very little information to work with. Based on the information you have given, it sounds like you flashed a custom ROM known as Dark Knight V2, but when it boots up it goes "weird"
Try the following:
1. Boot into Clockwork Recovery
2. Wipe EVERYTHING (Cache, Davlik, System, Data\Factory Restore)
3. Flash the ROM again
If that fails, try putting the phone into "Download Mode" and flashing a STOCK ROM.
If those steps don't work, you need to give us more information.
http://imageshack.us/photo/my-images/28/img09092011225210.jpg
http://imageshack.us/photo/my-images/225/img09092011225145.jpg
i am back to stock rom but evertingh same
i upload foto
serkonl said:
http://imageshack.us/photo/my-images/28/img09092011225210.jpg
http://imageshack.us/photo/my-images/225/img09092011225145.jpg
i am back to stock rom but evertingh same
i upload foto
Click to expand...
Click to collapse
Also stop creating new threads about the same issue.
Do a hard reset of the device not a factory reset
Hi guys
Before I explain I'd like to say that yes, I have read other threads on similar topics, although none seem to have the same symptoms as me...
This week I bought a software-bricked Defy on eBay with the hopes of fixing it and giving it to a friend. I first tried flashing an old Eclair SBF to no avail (only switched on to bootloader) and thought that it could be failing due to it being on a newer firmware. So then I tried Froyo, and when that didn't work either (bootloops like when I received the phone) I thought my last resort was a CG 5 SBF, so I went for the JORDN_U3_97.21.51 build. This seems to get further into the booting process, with the MotoBLUR animation appearing but I get a BP Panic - 0x00080010 above the animation before the phone switches off. Thinking I had nothing to lose I tried a Gingerbread ROM, but that just bootlooped too so I went back to 97.21.51. I realise I've probably painted myself into a corner by flashing these
I'm all out of ideas with how to get the phone any further and have searched for the BP panic to no avail. I can get into stock recovery and bootloader, although the recovery seems to have issues with accessing the cache sometimes.
Thanks for reading
The same panic have y for the last 2 weeks, after flashing hangs in bootloader (red logo and no animation), after other flash hangs on a animated red logo and thats where you must give it time 3 or 4 min. wating, when its dont works you can try to pul out battery and do it in again while you hold the start and vol. down button, then in recovery menu wipe Dalvik cache and wipe cahe. Maby it works then, when not you can try like me to go again tho recovery and there restore stockrom, thats the way ym getting my defy work again. There are many ways to get it back to work again and it cost me 2 weeks after flashing maby 15 diverend roms to get it works and even than when it works, 2 days work whit rooting it and get 3G alive. So when you think its dead, maby RSDlite can bring it back to live, just like here.
Now my Defy MB525 working like a Defy 526 on Gingerbread.
So don't give up, when you can see whit RSDlite the phoon, it must be possible to get it work, only problem here was on a moment when the battery was empty, but here on XDA you can find the megayver method (charging on a ohter cell like a duo) or what y have don, get my old nokia loader (5V) and whit 2 wires hangs on the battery power it up to 4.1 V, succes.
Thanks, although I was just getting repeated boot loops rather than it hanging on the logo... And that wasn't animated either. How did you manage to restore the stock ROM through the recovery? Did you have a flashable zip? Please bear in mind that I did not get a custom recovery installed
I'll look out for the low battery problem. Thanks for your advice
ben_duder said:
Thanks, although I was just getting repeated boot loops rather than it hanging on the logo... And that wasn't animated either. How did you manage to restore the stock ROM through the recovery? Did you have a flashable zip? Please bear in mind that I did not get a custom recovery installed
I'll look out for the low battery problem. Thanks for your advice
Click to expand...
Click to collapse
U should have wiped cache and data after flashing Froyo!!!!!!
It would have booted!!!!
Now u flashed GB!! Ur stuck there!!!
Flash gb again and Go to stock recovery and wipe data!!!! If know how to do it!!!
Sent from my MB526 using xda premium
nogoodusername said:
U should have wiped cache and data after flashing Froyo!!!!!!
It would have booted!!!!
Now u flashed GB!! Ur stuck there!!!
Flash gb again and Go to stock recovery and wipe data!!!! If know how to do it!!!
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thanks, although I'm pretty sure I did wipe cache and data... and I definitely did (several times ) after flashing Gingerbread. I feel like whatever is preventing Froyo and Gingerbread from booting is the same thing as what is giving me the BP panic on the CG 5 Eclair ROM.
I would suspect a hardware issue here.w
Sent from my MB525 using Tapatalk
I think it might be too It's a shame because I can enter recovery and bootloader okay, and the seller said it broke during a failed software update so I thought it would be a simple matter of reflashing an SBF.
what is bp panic?
what happens when it is booting?
Sent from my MB525 using xda premium
When I try to boot the CG 5 Eclair I get past the static Motorola logo (hence further than any other build) but the MotoBLUR animation is stuttery, with a BP panic at the top (see picture). This goes on for quite a while, then the phone switches off and this loops.
Ok if occurred during a software update, find out which he was installing and try that one. May also be worth trying motoupdate.
Sent from my MB525 using Tapatalk
I might try that, but won't it be useless now that I've flashed CG 5? I'll look into MotoUpdate
Is the general consensus that this is an unfixable hardware issue, then?
Apolgoies if you've already tried this, but I had a Defy which would do the same, either stuck on M logo or error in bootloader.
Each time I just plugged it into PC / USB at bootloader screen, and used RSD Lite to try another ROM. Eventually I found one which worked. I think I tried 5 before finding one which didn't cause any problems.
My defy was a ME525+ and the ROM which finally worked was "DEFYPLUS_U3_4.5.1-134_DFP-132_BLUR"
So, if you haven't already, I'd just suggest try a few more ROMS, flashed from Bootloader / RSD Lite.
Hope it helps somehow
Hi,
I was running CM10 on my defy and then i tried to update it with Quarx latest build and something went wrong....i was stuck at the motorola logo screen....
I used RSD Lite V5.3.1 to flash the stock rom to my defy and it still wont boot....its still stuck at the motorola logo....
Please help.....its booting only under the Bootloader mode (Power+Vol Up).....nothing else
Thanks
Shrewdy said:
Hi,
I was running CM10 on my defy and then i tried to update it with Quarx latest build and something went wrong....i was stuck at the motorola logo screen....
I used RSD Lite V5.3.1 to flash the stock rom to my defy and it still wont boot....its still stuck at the motorola logo....
Please help.....its booting only under the Bootloader mode (Power+Vol Up).....nothing else
Thanks
Click to expand...
Click to collapse
Did you flash the correct sbf?
How long are you stuck at the Motorola logo? Give a bit more information =P
It's most likely not bricked as it's almost impossible to brick the defy.. (I've never heard of it)
Please help
pk92 said:
Did you flash the correct sbf?
How long are you stuck at the Motorola logo? Give a bit more information =P
It's most likely not bricked as it's almost impossible to brick the defy.. (I've never heard of it)
Click to expand...
Click to collapse
Hi,
First i had upgraded to froyo and and used this link to get Gingerbread on my defy
http://forum.xda-developers.com/showthread.php?t=1285007
After that i installed many roms and the last one to be tried was CM10...which started all the problems...
I have now tried to flash rom from this link
http://forum.xda-developers.com/showthread.php?t=1386942
now it is booting up but now it is stuck with the animation screen....the phone actually does not start....
i know its something to do with the kernel but then i dont know which type of kernel to flash and how!!
Please help..
Let me know if you need any more information
Thank you....
Shrewdy said:
Hi,
First i had upgraded to froyo and and used this link to get Gingerbread on my defy
http://forum.xda-developers.com/showthread.php?t=1285007
After that i installed many roms and the last one to be tried was CM10...which started all the problems...
I have now tried to flash rom from this link
http://forum.xda-developers.com/showthread.php?t=1386942
now it is booting up but now it is stuck with the animation screen....the phone actually does not start....
i know its something to do with the kernel but then i dont know which type of kernel to flash and how!!
Please help..
Let me know if you need any more information
Thank you....
Click to expand...
Click to collapse
Red or Green Lens? Defy or Defy+?
If Red Lens then you can use Defy or Defy+ build straight from Froyo after installing 2nd init.
If Red Lens Defy with Defy+ build, you will need a battery fix
If Red Lens Defy with Defy build, nothing else needs to be installed
If Green Lens Defy, you can only use Defy build. Nothing else needs to be installed.
If Defy+ You can only use defy build, nothing else needs to be installed.
Download the defy/defy+ builds here:
http://forum.xda-developers.com/showthread.php?t=1768702
http://quarx2k.ru
There is also an SBF of CM10 here: http://forum.xda-developers.com/showthread.php?t=1691901
Thanks buddy
pk92 said:
Red or Green Lens? Defy or Defy+?
If Red Lens then you can use Defy or Defy+ build straight from Froyo after installing 2nd init.
If Red Lens Defy with Defy+ build, you will need a battery fix
If Red Lens Defy with Defy build, nothing else needs to be installed
If Green Lens Defy, you can only use Defy build. Nothing else needs to be installed.
If Defy+ You can only use defy build, nothing else needs to be installed.
Download the defy/defy+ builds here:
http://forum.xda-developers.com/showthread.php?t=1768702
http://quarx2k.ru
There is also an SBF of CM10 here: http://forum.xda-developers.com/showthread.php?t=1691901
Click to expand...
Click to collapse
i am downloading the CM10 sbf's for both Froyo and GB..
i will try to install each and will see which ones works for me....
Coz i have a defy and i think it is a red lense one.
But i had a GB kernel running on my defy....
I hope thinks get well with my defy....
Thanks, will update you as soon as something happens....
Nothing works
Shrewdy said:
i am downloading the CM10 sbf's for both Froyo and GB..
i will try to install each and will see which ones works for me....
Coz i have a defy and i think it is a red lense one.
But i had a GB kernel running on my defy....
I hope thinks get well with my defy....
Thanks, will update you as soon as something happens....
Click to expand...
Click to collapse
----------------
All hopes going down... I have flashed these sbf's from the link your provided but nothing works !!
1. Froyo-cm-10,JB.Quarx.30.07.build.Defyred/green.bl4.fixed'sbf NEW
2. A.2.3.6-cm-10,JB.Quarx-30.07build-Defy+/red fixed'sbf cm-10 bootanimation New
Infact i get an error at the bootloader itself Err: A5,70,00,00,23 (wonder whats that)
There is only 1 sbf that boots it up....but then my defy keep looping on the blur animation and never boots up....
SBF that works the most i got it from here
http://forum.xda-developers.com/showthread.php?t=966537
which was (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage Thread)
This works and atleast it sort of tries to boot up....
Also if i try to get into the recovery mode (Power + Vol Down)....i cannot see any options in recovery....just the small android exclamation image !!
Can you please help and get me atleast booted up till recovery ??
Thanks
Shrewdy said:
----------------
All hopes going down... I have flashed these sbf's from the link your provided but nothing works !!
1. Froyo-cm-10,JB.Quarx.30.07.build.Defyred/green.bl4.fixed'sbf NEW
2. A.2.3.6-cm-10,JB.Quarx-30.07build-Defy+/red fixed'sbf cm-10 bootanimation New
Infact i get an error at the bootloader itself Err: A5,70,00,00,23 (wonder whats that)
There is only 1 sbf that boots it up....but then my defy keep looping on the blur animation and never boots up....
SBF that works the most i got it from here
http://forum.xda-developers.com/showthread.php?t=966537
which was (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage Thread)
This works and atleast it sort of tries to boot up....
Also if i try to get into the recovery mode (Power + Vol Down)....i cannot see any options in recovery....just the small android exclamation image !!
Can you please help and get me atleast booted up till recovery ??
Thanks
Click to expand...
Click to collapse
I believe that little android guy is the stock recovery. From what I remember you hold both volume buttons and it takes you into stock recovery.
Unfortunately, you will no longer have 2nd init installed, which allows for CWM recovery, so you can't flash a zip from there.
How long does it stay stuck on the blur logo? Maybe you're just not waiting long enough? (Stupid question I know, but some people complain after 2 minutes, the first boot can take a long time!)
Try looking at This thread and see if the link which is in this post will work to download the Taiwanese SBF. For me it doesn't seem to load
Edit: - Oh the Taiwanese SBF did eventually download. Took about 5 minutes with the tab open loading. I've uploaded it to my Dropbox so you can download from there... should be a bit faster!
JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C_USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
(MD5 - 34E9A43EAB8D2FF6101536C4B3F104BD)
Note: This is Taiwanese, NOT CHINESE. The Chinese one burns out the flashlight and it cannot be used after that.
Still stuck
pk92 said:
I believe that little android guy is the stock recovery. From what I remember you hold both volume buttons and it takes you into stock recovery.
Unfortunately, you will no longer have 2nd init installed, which allows for CWM recovery, so you can't flash a zip from there.
How long does it stay stuck on the blur logo? Maybe you're just not waiting long enough? (Stupid question I know, but some people complain after 2 minutes, the first boot can take a long time!)
Try looking at This thread and see if the link which is in this post will work to download the Taiwanese SBF. For me it doesn't seem to load
Edit: - Oh the Taiwanese SBF did eventually download. Took about 5 minutes with the tab open loading. I've uploaded it to my Dropbox so you can download from there... should be a bit faster!
JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C_USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
(MD5 - 34E9A43EAB8D2FF6101536C4B3F104BD)
Note: This is Taiwanese, NOT CHINESE. The Chinese one burns out the flashlight and it cannot be used after that.
Click to expand...
Click to collapse
Thanks for helping me out....
The motorola logo stays around for 20 seconds after with the Motorola boot animation starts.....
So i left my defy on for around 20 mins and nothing is happening its still playing the boot animation. !!
I havent yet downloaded the sbf link you have given me as i am at work now and will be able to do that only when i reach home.
Another thing i have noticed is that i am able to charge my defy....that means the rom is present and hopefully working !!
What say....???
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Euro your awesome!!
Euro_Rules said:
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Click to expand...
Click to collapse
Hi buddy,
Thanks yaar...i did exactly you told me to and the phone booted normally...
thanks a million buddy...:good::good:
And i also owe a million thanks to pk92...you have been there when i need you the most buddy....:good::good::good:
Thanks...m so happy to see my defy come back to life... :laugh::laugh::laugh::laugh:
O god!! its been a tough time but i learnt something new too....
Thanks guys :laugh:
friend request !!
hi, pk92 & euro
i have sent you friend request...do accept if you like !!
Thanks guys...
Shrewdy said:
Hi buddy,
Thanks yaar...i did exactly you told me to and the phone booted normally...
thanks a million buddy...:good::good:
And i also owe a million thanks to pk92...you have been there when i need you the most buddy....:good::good::good:
Thanks...m so happy to see my defy come back to life... :laugh::laugh::laugh::laugh:
O god!! its been a tough time but i learnt something new too....
Thanks guys :laugh:
Click to expand...
Click to collapse
Hehehehehehehehe
You are Welcom Shrewdy
Say thanks to our awesome XDA developer's Because of them we are nothing...
Shrewdy said:
hi, pk92 & euro
i have sent you friend request...do accept if you like !!
Thanks guys...
Click to expand...
Click to collapse
Accepted :highfive:
Guys I have the same problem.
Phone was upgraded from Froyo to CM7 and took it fine. Played for a while in CM7 but decided to upgrade to CM10.
Followed the steps from this thread http://forum.xda-developers.com/showthread.php?t=1795647
flashed foryo Kernel
Flashed CM10-20120924-NIGHTLY-mb525.zip
Flashed Google apps
Cleared cache, cleared Dalvik
Phone boots but gets stuck at Motorola logo and after blue and green light it loops back again to the same sequence.
It's a Defy with green lens and it had stock T-Mobile Froyo (rooted) before flash to CM7.
I'm now back to CM7 as CM10 didn't want to work.
sorry didnt get you
czarekusa said:
Guys I have the same problem.
Phone was upgraded from Froyo to CM7 and took it fine. Played for a while in CM7 but decided to upgrade to CM10.
Followed the steps from this thread http://forum.xda-developers.com/showthread.php?t=1795647
flashed foryo Kernel
Flashed CM10-20120924-NIGHTLY-mb525.zip
Flashed Google apps
Cleared cache, cleared Dalvik
Phone boots but gets stuck at Motorola logo and after blue and green light it loops back again to the same sequence.
It's a Defy with green lens and it had stock T-Mobile Froyo (rooted) before flash to CM7.
I'm now back to CM7 as CM10 didn't want to work.
Click to expand...
Click to collapse
hey buddy...m sorry i didnt quite get you....
As per my understanding i believe your phone is working fine with CM7 installed and you want to install CM10 on your defy !!
am i correct !!
if you then let me make it clear that the latest CM10 build used a custom kernel made by quarx himself....it is not running a froyo or gb kernel...
so here is what you need to do....
1. simply factory reset your phone...clear cache and dalvik...
2. now flash the latest CM10 build
3. again...clear cache and dalvik...
4. and now let defy boot....first boot may take a longer time....
hope this works for u...if it does not...let me know...will b glad to help u...
Thanks
Shrewdy said:
hey buddy...m sorry i didnt quite get you....
As per my understanding i believe your phone is working fine with CM7 installed and you want to install CM10 on your defy !!
am i correct !!
if you then let me make it clear that the latest CM10 build used a custom kernel made by quarx himself....it is not running a froyo or gb kernel...
so here is what you need to do....
1. simply factory reset your phone...clear cache and dalvik...
2. now flash the latest CM10 build
3. again...clear cache and dalvik...
4. and now let defy boot....first boot may take a longer time....
hope this works for u...if it does not...let me know...will b glad to help u...
Thanks
Click to expand...
Click to collapse
Yes, you are correct. the phone is working fine with CM7.
Factory reset, you mean from boot menu or the hard factory reset with holding volume keys (procedure posted above in this thread)?
The first time I actually tried, I did flash of CM10 without the prior kernel flash and it didn't work either.
so do I need any kernel flash or do I just flash it with CM10 and it should work?
I'll try again later today or tomorrow.
Thanks
czarekusa said:
Yes, you are correct. the phone is working fine with CM7.
Factory reset, you mean from boot menu or the hard factory reset with holding volume keys (procedure posted above in this thread)?
The first time I actually tried, I did flash of CM10 without the prior kernel flash and it didn't work either.
so do I need any kernel flash or do I just flash it with CM10 and it should work?
I'll try again later today or tomorrow.
Thanks
Click to expand...
Click to collapse
Lots of us who had bootloops trying to flash CM10 24/09 with a BL5 base SBF solved the problem by flashing a BL6 base Froyo SBF.
But try a factory reset and flashing your stock T-Mobile Froyo first.
If your stock doesn't flash properly then it means you have inadvertently flashed something which updated your BL version to BL5.
I flashed the JDGC_U6.2.13.0 SBF which is BL6 and then I was fine.
Don't use this ROM though, just use it as a stepping-stone to install CM10.
Euro_Rules said:
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Click to expand...
Click to collapse
Thanks a lottt.. :highfive:
Hey there, I've tried almost every method to boot up the new Quarx builds, but for me it's impossible to boot this ROM's on my Defy red lens.
I have pull out the battery, installed the fix for dead screens, flashed 2409 and then the 0610 kernel, but no result.
Also, I wasn't able to boot the last non 2nd-boot built, the 2409 CM10 Nightly so I'm using 1209.
The only thing that I haven't is flashing another .sbf, but RSDLite doesn't recognize my Defy and Windows also not, with the latest drivers of Motorola installed.
Please, if anyone knows how to help me, reply me as soon as you can.
Thanks in advance and sorry for my poor english.
http://forum.xda-developers.com/showthread.php?t=1818520 try it with this zip, it worked for me. just erase all and flash latest build.
Jelly powered.Defy
Thank you for replying so fast, but I have already tried that a couple of times before. Anyway, I'll try again.
More info about my problem: when I flash any of the 2nd-boot ROM's and boot into bootmenu and after that select again 2nd boot, the screen goes black, BUT the backlight of the buttons turns on. Does it mean anything ?
Thanks in advance
Sent from my MB525 using xda app-developers app
TinoSP said:
Thank you for replying so fast, but I have already tried that a couple of times before. Anyway, I'll try again.
More info about my problem: when I flash any of the 2nd-boot ROM's and boot into bootmenu and after that select again 2nd boot, the screen goes black, BUT the backlight of the buttons turns on. Does it mean anything ?
Thanks in advance
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
normal the buttons flash and after few seconds u see the boot animation.
tell me more about ur phone.
what bl? and what model mb525 or 526.
Jelly powered.Defy
AnTerNoZ said:
normal the buttons flash and after few seconds u see the boot animation.
tell me more about ur phone.
what bl? and what model mb525 or 526.
Jelly powered.Defy
Click to expand...
Click to collapse
It's an MB525 Red lenses(Bayer). I don't know what kind of BL has, it comes from the official Froyo ROM of Vodafone Spain, and after that CM7,
So close..but I waited when the buttons were on for about an hour or something and nothing happened, should I be more patient?
TinoSP said:
It's an MB525 Red lenses(Bayer). I don't know what kind of BL has, it comes from the official Froyo ROM of Vodafone Spain, and after that CM7,
So close..but I waited when the buttons were on for about an hour or something and nothing happened, should I be more patient?
Click to expand...
Click to collapse
if u wait longer ur battery run out of power! don't do this or u have to mcgyver it.
do the following
load the CM10 2nd boot new
load the new version 4 update
wipe ur device
install ROM + update
install Gapps ur want
restart phone, if u get red led longer than a minute, pull battery out for 5-10min and press power button when battery is removed.
put back the battery, and wait for the CM10 bootanimation.
if that not work ur bl is not compatible and u had to flash a higher one, it's known that some bl5 not work, u just had to flash a bl6 ROM. for the ROM just look at the thread were all roms in, there u can found ur bl version.
Jelly powered.Defy
AnTerNoZ said:
if u wait longer ur battery run out of power! don't do this or u have to mcgyver it.
do the following
load the CM10 2nd boot new
load the new version 4 update
wipe ur device
install ROM + update
install Gapps ur want
restart phone, if u get red led longer than a minute, pull battery out for 5-10min and press power button when battery is removed.
put back the battery, and wait for the CM10 bootanimation.
if that not work ur bl is not compatible and u had to flash a higher one, it's known that some bl5 not work, u just had to flash a bl6 ROM. for the ROM just look at the thread were all roms in, there u can found ur bl version.
Jelly powered.Defy
Click to expand...
Click to collapse
Ok, I'm gonna try it, but first, to ensure that I'm doing the steps right, I'm gonna ask you two things: With "wipe" you mean wipe data+cache+dalvik or with the defy_full_wipe.zip?
And till now, I have flashed the updates as a normal ROM, should I flash them as an update.zip ?
yes, it's an update.zip! just enter custom recovery and go to install zip.
and wiping with recovery is enought, i use the ultimate zip only if i get problems.
Jelly powered.Defy
I have just tried and it hasn't worked. Thanks anyways for you efforts. I think that my only possible solution is flashing a new .sbf, but Rsdlite doesn't recognize my Defy
Sent from my MB525 using xda app-developers app
have u tried a different USB slot?
if u flash an sbf, try the custom ones, they are great.
Jelly powered.Defy
Yes, I have tried in four different USB ports in my laptop and even Windows doesn't recognize it, it shows my Defy as a unknown device
Sent from my MB525 using xda app-developers app
hmmm... what OS u had on PC? had u tried reinstall Motorola drivers with reboot?
Jelly powered.Defy
same problem, green lense
I have the same issues.
I have a green lens defy, was able to flash every nightly version until the 0924 version. So in other words, the last ROM that I was able to get booted was the 0912 quarx CM10 nightly.
I have looked in all the threads I could find, searched as much as I could, tried every technique, and still can't get past the black screen with the red LED.
I absolutely cannot get it to work no matter what I try. I've seriously read at least half a dozen people's instructions and nothing works. NOTHING! I have not tried starting from a stock sbf because I'm satisfied just barely enough using the 0912 nightly.
HELP!
Try to restore your Nandroid backup. If it does not work use RSDLite on a clean OS and reinstall root access,2ndinit and CM10.
Sent from my MB526 using xda app-developers app
AnTerNoZ said:
hmmm... what OS u had on PC? had u tried reinstall Motorola drivers with reboot?
Jelly powered.Defy
Click to expand...
Click to collapse
I have Windows 7 Home Premium, and I have run RSDLite in administrator rights and even in compatibility mode. I didn't tried to reinstall drivers because I don't have much time right now, so I'll tell you.
nastys said:
Try to restore your Nandroid backup. If it does not work use RSDLite on a clean OS and reinstall root access,2ndinit and CM10.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Are you replying to bulbouscorm or to me?
it happens to me with win 7 ultimate that the driver I installed half year before was corrupt, pleas try reinstall.
it's really not often that a defy will not recognized on PC.
u can also try a Linux Live-CD to flash it from there. but I not know the tool for Linux, search on forum and u will find it
Jelly powered.Defy
nastys said:
Try to restore your Nandroid backup. If it does not work use RSDLite on a clean OS and reinstall root access,2ndinit and CM10.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I restored my backup from a ICS version, but then I kind-of bricked my phone so I had to flash the stock Eclair .sbf.
I was playing with my very dumb phone at work, now I'm home I'll try to update to the latest CM10. Fingers crossed!
EDIT: I flashed the 1018 nightly - this time the boot logo was a silver M instead of the google logo I've been used to. AAAAAND it's still giving me a black screen + red LED. I flashed the sbf, rooted, installed 2nd init, and then flashed the 1018 nightly, the update, gapps with some cache/dalvik wiping before and after the nightly-update-gapps flash
I'm trying again using the custom zip files to wipe everything instead of using the recovery menu. Also this time I'm using the minimal gapps instead of the 1011 version
AAAAND it didn't work. black screen + red LED. I'm really looking for help here. Should I have not flashed straight from the froyo-updated stock sbf to the latest jb nightly?
bulbouscorm said:
I restored my backup from a ICS version, but then I kind-of bricked my phone so I had to flash the stock Eclair .sbf.
I was playing with my very dumb phone at work, now I'm home I'll try to update to the latest CM10. Fingers crossed!
EDIT: I flashed the 1018 nightly - this time the boot logo was a silver M instead of the google logo I've been used to. AAAAAND it's still giving me a black screen + red LED. I flashed the sbf, rooted, installed 2nd init, and then flashed the 1018 nightly, the update, gapps with some cache/dalvik wiping before and after the nightly-update-gapps flash
I'm trying again using the custom zip files to wipe everything instead of using the recovery menu. Also this time I'm using the minimal gapps instead of the 1011 version
AAAAND it didn't work. black screen + red LED. I'm really looking for help here. Should I have not flashed straight from the froyo-updated stock sbf to the latest jb nightly?
Click to expand...
Click to collapse
I was getting the black screen + red LED too, but manage to get it to work.
1: I flashed 0924
2: Then wiped everything
3: Flashed the 1018 build.
4: Tried botting - red LED + black screen
5: Booted to recovery
6: In boot options, reselected 2nd boot.
7: Tried to boot - red LED + black screen
8: Removed the battery
9: Waited 5 mins (could be more)
10: Placed the battery back
11: Tried to boot - Success.
Most of this steps are not needed, but it is what made my Defy boot with the 2ndboot builds.
bulbouscorm said:
...
I had to flash the stock Eclair .sbf.
.....
EDIT: I flashed the 1018 nightly - this time the boot logo was a silver M instead of the google logo I've been used to.
...
Click to expand...
Click to collapse
the silver m is eclair bootanimation
something defiantly goes wrong with ur phone. u should upgrade to a froyo ROM with bootloader version 6, there are a few user had problem with older bootloader to run second boot builds
Jelly powered.Defy
Yes, use BL6, latest CM10 2nd init rom and wipe data,cache,dalvik before installing, then use Stable Recovery to install zip from sdcard->18.10 ROM then install zip from sdcard->update v4 then install zip from sdcard->Gapps, reboot twice and it will work.
Sent from my MB526 using xda app-developers app
EDIT: And remember to wipe everything before restoring a Nandroid backup.
Hi,
Today, I flashed Stock DXLF2 ROM because I want to port Ace-i-Sure ROM to my device. I was come from CM7 by PsychoGame. The device boots up, recovery mode works, in download mode white screen, but the device is recognized by odin.
Here is the video:
https://www.youtube.com/watch?v=1Naz-qtylmY
Do anybody have this White screen too? How to remove it?
Change your kernel ..it is corrupted
ps-AFAIK the param.lfs is corrupt
and
Wrong Section this should be in troubleshooting and Q&A section
Sent from my GT-S5360 using xda app-developers app
tom411 said:
Hi,
Today, I flashed Stock DXLF2 ROM because I want to port Ace-i-Sure ROM to my device. I was come from CM7 by PsychoGame. The device boots up, recovery mode works, in download mode white screen, but the device is recognized by odin.
Here is the video:
https://www.youtube.com/watch?v=1Naz-qtylmY
Do anybody have this White screen too? How to remove it?
Click to expand...
Click to collapse
Hi,
I am having the same exact problem.
1. I installed Percy CM2 kernel.
2. Tried to install his CM7.2
3. Got "cant mount cache" error
4. Then Phone got bricked.
5. So installed stock ROM DDLF1
6. Now the white screen prob.
Did you solve this prob. Any solution.
Install a new krenel
sent from my UNLOCKED gt-s5360 using the XDA app
I solved it at last
I tried flashing all types of kernel both stocks and customs. But this problem continued. Then I tried using pit and bootloader files while flashing stock Rom DDMD1 from doky. Now this problem completely stopped.
white screen issue
csk213 said:
I tried flashing all types of kernel both stocks and customs. But this problem continued. Then I tried using pit and bootloader files while flashing stock Rom DDMD1 from doky. Now this problem completely stopped.
Click to expand...
Click to collapse
i tried to root the device gt 7262, but ended in white screen issue, then I reflashed the the phone to fix the issue, now I ended in white sceen even on start up, I am also getting white screen on download mode, please kindly help me