[16Feb13 edit]How to change system status 'Modified' to 'Normal' /'Official' - Galaxy Note II General

How to change system status 'Modified' to 'Normal' in setting - About device and 'official' in download mode
Here lot people asking about system setting is 'modified' (under setting - about device -status), here is a guide with which you can reset device status to 'Normal'.
Note again you needs to be on stock kernel and stock recovery for this. This won't reset counter as well if your counter is non zero then it won't work.
Though i never bother for it, because it was known that wiping cache and data from recovery turns it to 'Normal'. so whenever we needs to send it to service center we can do it. In hard brick case you can't access recovery/download mode, but here there is no chance service center can detect your status. so in my point of view there is nothing to bother about device status much but flash counter should always to keep '0', if you are really worrying about warranty. b'coz in partial brick download mode still accessible and they can see your device flash counter, but you can't reset it (b'coz triangle away needs live device to reset counter)
Click to expand...
Click to collapse
Anyway for those who having concern about device status and still want to change it to 'Normal' here i have find a solution. I don't know till how long it will keep ' Normal' as samsung have some smart checker and can detect root access and again change it to 'Modified' But not to worry, i have mentioned procedure takes few seconds and you can re do anytime.
Still Not tested :
Whether this change status in download mode or not that i couldn't check, b'coz mine status in download mode was already 'Official' Feedbacks are welcome
Click to expand...
Click to collapse
How to change status [Edit 16Feb13 : If you don't have titanium just read at end of this post]
1.Install and Open Titanium backup and look for 1.SysScope and 2.Enterprise sysscope service 4.1.2.** backup (NOTE : Some ROM only have file 1.sysscope, in that case ignore second)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. click on backup of both files, and select 'Wipe data' for each file (Be careful and just do wipe data, nothing else)
-Reboot device
Now device status should be 'Normal'
[16Feb13] Edit :
I have again got chance to test system status under download mode
It was System status : Custom
status under setting - about device - Normal
So i have tried wiping data for
1.Enterprise sysscope service 4.1.2.** (this was found after new firmware DM2 only)
2.Sysscope 1.1.14
then rebooted device to recovery
reboot device
Reboot to Download mode and surprisingly status in download mode is 'Official' as well under setting - about device - also 'Normal'
If you don't have titanium backup, try this
setting - application manager- All - find both application 1.Enterprise Sysscope service and SysScope and clear data for both
Reboot.

:good: this is the one that i've been waiting for

Thanks doctor.
I want to make it clear.This needs stock recovery, right?I tried it just for fun in my stock rooted DLK7 with custom recovery but nothing changed after rebooting.
Btw in latest Triangle away there is an option to become system to normal and i notice that is freezing SysScope in system.

Re: How to change system status 'Modified' to 'Normal' in setting (without factory re
Your a life saver doc Thanxx a million
Sent from my GT-N7100 using xda premium

eliashadow said:
Thanks doctor.
I want to make it clear.This needs stock recovery, right?
Click to expand...
Click to collapse
yeah obviously it needs to be stock recovery.

dr.ketan said:
yeah obviously it needs to be stock recovery.
Click to expand...
Click to collapse
Not obviously for users who will ask again and again about...hehehe...
Just tried it in one other Note and working perfect...
Good finding again mister...

eliashadow said:
Not obviously for users who will ask again and again about...hehehe...
Just tried it in one other Note and working perfect...
Good finding again mister...
Click to expand...
Click to collapse
Ha ha that's correct
will edit OP for newbie.

Cool find out, Dr.Ketan
Now we don't need wipe ,wipe and wipe to keep device status normal .

Nice discover, now have found something so much interesting as this functions
arrayOfString[1] = "adbscanner";
arrayOfString[2] = "partition_checker";
arrayOfString[3] = "su_scanner";
arrayOfString[4] = "kernel_checker";

Tried this on stock Note 2 GT-N7100 PDA:LJ1 Phone: LIH CSC:LJ1 (PHN) But it does not work . Status stays changed

marleyb said:
Tried this on stock Note 2 GT-N7100 PDA:LJ1 Phone: LIH CSC:LJ1 (PHN) But it does not work . Status stays changed
Click to expand...
Click to collapse
Have you check it under setting or under download mode?
do you have stock recovery?
Have you reboot device?
what is your flash counter under download mode?

Same here..product number jzo54k.n7100xxdll7 with german stock rom and stock recovery root...flash counter remains 1 and status modified..and triangle away also does nothing...Sorry..i was checking counter with triangle away..but it menions that in some phones will always write flash counter 1 so i have to check with download mode..so i entered download mode and it says custom binary download no,current binary samsung official and system status custom

giolekos said:
Same here..product number jzo54k.n7100xxdll7 with german stock rom and stock recovery root...flash counter remains 1 and status modified..and triangle away also does nothing...
Click to expand...
Click to collapse
This guide don't reset counter, this is only for who have status modified under device setting. and if your counter is non zero, this guide won't work.
Edit :
You have edited post after my above reply
Just to add, counter remains 1 if you are using CWM recovery OR custom kernel. Do you using it?
If it is complete stock, and download mode shows counter 'No' then you need to restart after following instruction in OP. does sysScope backup is purple in TB?

Doctor i am only stock from day one...with stock recovery..i havent do backup for syscope ,i clean the cache but nothing..my only problem is that i cant connect with the all share cast because of this

you may have to wipe cache and data to make status official in download mode.

Re: How to change system status 'Modified' to 'Normal' in setting (without factory re
Hi Dr. Ketan,
I am on both stock recovery and rom, tried your trick but not solved i still get my status modified.
Warmest Greeting From Batam - Indonesia

Re: How to change system status 'Modified' to 'Normal' in setting (without factory re
What is your status in download mode?
Sent from my GT-N7100 using xda premium

Re: How to change system status 'Modified' to 'Normal' in setting (without factory re
That weird if u ask me my status, at download mode it say binary counter 0, current binary official and system status custom but when i boot with triangle away or show me as 1 any advice? Thanks
Warmest Greeting From Batam - Indonesia

Re: How to change system status 'Modified' to 'Normal' in setting (without factory re
Try flashing any cwm, and reboot normally your counter will raise 1.
Re flash stock recovery.
Reset counter with triangle away
Now download mode should show
Counter No
Status official
After this if your device status showing modified under settings then follow trick as said in op.
Sent from my GT-N7100 using xda premium

Re: How to change system status 'Modified' to 'Normal' in setting (without factory re
Sorry Dr. Ketan forgive my noobness where to get stock recovery? Or i can Flash with whole rom from mobile odin but just select to Flash recovery? Or is there any link for me to download the stock recovery file only, I am now on stock rom for Indonesia (LL7) Thanks
Warmest Greeting From Batam - Indonesia

Related

[Q] What did I do to my I9500 (probs with 4.3, ODIN, recovery, etc.)?

This is where my I9500 is right now:
AP: I9500UBUBMG9
CP: I9500UBUEMK1
CSC: I9500UUBBMG9
I know that MK1 is from 4.3 and MG9 from 4.2.2. So I'll tell you how my phone got there:
Last week I flashed stock 4.3 (and did a backup in CWM recovery before flashing.) To my dismay, everything with 4.3 was very laggy and unresponsive; services were stopping left-and-right. A battery-pull/hard-restart had no effect. The lag was so bad that it took me 2 to 3 minutes to properly shut it down each time.
So at that point, I planned to reflash 4.2 (I was not aware of the problems of downgrading after upgrading to 4.3.) In trying to do so, ODIN (on my PC) would just freeze partway through, never completing the process and giving me some error message. In trying to reenter ODIN mode, I'd get the yellow triangle screen each time.
After some searching of the forums here, I found and did something (I can't remember exactly what it was) but I managed to enter ODIN mode. This time I tried reflashing again. Same thing, of course. But this second time around I noticed the "warranty bit: 1" thing that I hadn't noticed before (I figured it had to be something to do with knox that I had read about in upgrading to 4.3.) Here's my current screen in ODIN mode:
PRODUCT NAME: GT-I9500
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
WARRANTY BIT: 1
Anyway, rather than keep messing around with ODIN, I thought I would just restore the backup I made. But instead of entering recovery, I kept getting the yellow triangle. Finally, as a last-ditch effort, I ended up reflashing CWM Recovery through ODIN. Then I was able to successfully enter recovery mode, restore my backup image. Now my phone runs just as it did before (just with a different baseband version.)
What does all this mean for my device?
Any ideas why 4.3 was crashing everything? Is there something different I should do before I reflashing 4.3? Or should I wait for a more stable 4.3.x? (I assum the errors I experienced in ODIN were due to trying to downgrade to 4.2. I would certainly hope to use ODIN in the future to flash new versions.)
1. You cant come back from 4.3 to 4.2.2
2. You void ur warranty for the step 1
3. ODIN didnt finish any process for the step 1 too.
4. You could come back to 4.2.2 coz u restored one backup. You still having new bootloader (warranty bit:1) with old 4.2.2 firmware.
5. Go to Apps - Settings - More - About device and make us a screenshot pls
4. Conect ur phone to Kies (android 4.2.2) or Kies 3 (android 4.3) and tell us what appears close CSC btw (). We need know ur zone code and download the correct firmware for ur region
Joku1981 said:
1. You cant come back from 4.3 to 4.2.2
2. You void ur warranty for the step 1
3. ODIN didnt finish any process for the step 1 too.
4. You could come back to 4.2.2 coz u restored one backup. You still having new bootloader (warranty bit:1) with old 4.2.2 firmware.
5. Go to Apps - Settings - More - About device and make us a screenshot pls
4. Conect ur phone to Kies (android 4.2.2) or Kies 3 (android 4.3) and tell us what appears close CSC btw (). We need know ur zone code and download the correct firmware for ur region
Click to expand...
Click to collapse
From Kies:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TPA is Panama, right? When I flashed 4.3, it was indeed "TPA" (so I'm really clueless why it was so laggy and unusable.)
From my phone:
mathyou9 said:
From Kies:
TPA is Panama, right? When I flashed 4.3, it was indeed "TPA" (so I'm really clueless why it was so laggy and unusable.)
From my phone:
Click to expand...
Click to collapse
- You cant receive OTA updates or Kies updates (u see it in the screenshot u attached before) how u have the phone now
- I will tell my steps and u can do what u wish later:
1. Download and unrar correct firmware for ur phone -> HERE (I dunno where u download it, anyway if u have it u dont need download it again)
1. Make a Internal Memory backup
2. Go to Custom Recovery and make a full wipe (data, system, cache and dalvick cache) and reboot ur phone in DOWNLOAD MODE
3. Open Odin with ur PC
4. Flash the firmware by PDA/AP button
5. Click START button
6. Wait till the process finish and ur phone will reboot
7. Ur phone will go perfect now i think
8. Good luck
Joku1981 said:
- You cant receive OTA updates or Kies updates (u see it in the screenshot u attached before) how u have the phone now
- I will tell my steps and u can do what u wish later:
1. Download and unrar correct firmware for ur phone -> HERE (I dunno where u download it, anyway if u have it u dont need download it again)
1. Make a Internal Memory backup
2. Go to Custom Recovery and make a full wipe (data, system, cache and dalvick cache) and reboot ur phone in DOWNLOAD MODE
3. Open Odin with ur PC
4. Flash the firmware by PDA/AP button
5. Click START button
6. Wait till the process finish and ur phone will reboot
7. Ur phone will go perfect now i think
8. Good luck
Click to expand...
Click to collapse
OMFG! I completely mis-remembered what I actually did (I can't even believe it!) Thank you for jogging my memory.
Initially I wasn't too keen on the 8-hour ETA for downloading 4.3, so I reflashed stock 4.2 in ODIN. And it was through Kies that I installed 4.3. Obviously in its stock 4.2 state, Kies recognized it as "updatable" and initiated the download/update of 4.3. So the whole unstable installation I had is even more perplexing. Oh well. I'm downloading 4.3 now and will try updating through ODIN. I'll report back. Thanks.
Up and running 4.3 without any issues. Thanks.
can i downgrade from 4.3 to 4.2.2 without any issue, includingwith 4.3 bootloader, using the latest 4.3 modem, the devices it's running great, no problem so far, and yes TPA is for Panama also PBS, CPA, CPW

yet another wifi problem

Hi, my phone came as a re-furb and it had a united arab emirates rom on it(ramadan dates on calendar, all languages set to arabic etc.), wifi was working on this rom fine.
i upgraded to xxungng8 and wifi also worked. the next day when i took my phone off charge it dropped wifi. the only way i was able to get it back was installing the adam kernel. i had tried updating the modem(non hlos wifi fix). that was last friday, the wifi stopped working the nxt time i had finished charging my phone, now i cant get wifi working atall, it did work once after the battery had ran right down and i recharged it, but only for a few minutes. i changed the rom to xxufnc9 because on the thread it showed it fixed it for a lot of people but not me unfortunately.
when i try to turn on wifi the slider goes across to the 1 but is grayed out, it then jumps back to 0, and does the same each time i try to start wifi. ive got a build.prop file(through adam kernel) which changed the setting from true to fasle also.
i have tried updating the modem to the latest(GNk4) but it wont take on the phone, when i dial *#1234# i get
AP:i9505xxufnc9
cp:i9505xxufnc9
csc:i9505oxafnb8
i think if i can get the phone to take the wifi fix modem this should solve it?
i have tried flashing with oden, getting pass, manually rebooting(both power for 10 secs and battery pull), then flashing again straight into recovery then reset but no luck so far.
Any help would be great, thanks.
so obciously when i tried the update the modm it didnt take.
Install this APP and add some screenshots here pls.
http://imgur.com/nGWWKxW
http://imgur.com/V1qXODf
http://imgur.com/LD1kMW7
http://imgur.com/glGJIhd
http://imgur.com/rAbMHYs
http://imgur.com/gWgjbbS
http://imgur.com/lDZHz7q
Wifi Problem
There Might be some Hardware Compatiblity issue with ur phone
tbkbt said:
http://imgur.com/nGWWKxW
http://imgur.com/V1qXODf
http://imgur.com/LD1kMW7
http://imgur.com/glGJIhd
http://imgur.com/rAbMHYs
http://imgur.com/gWgjbbS
http://imgur.com/lDZHz7q
Click to expand...
Click to collapse
1. Download, unzip and flash the latest firmware for your device via ODIN: HERE.
2. Make a data backup and a "factory reset" (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything) then.
3. Try if you have wifi when your device reboots.
4. Dial *#1234# and tell me what appears :highfive:
Joku1981 said:
1. Download, unzip and flash the latest firmware for your device via ODIN: HERE.
2. Make a data backup and a "factory reset" (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything) then.
3. Try if you have wifi when your device reboots.
4. Dial *#1234# and tell me what appears :highfive:
Click to expand...
Click to collapse
Ok, no wifi, now i get
AP:i9505xxugng8
CP:I9505xxufnc9
csc:i9505yxygnh2
Thanks for your help so far.
tbkbt said:
Ok, no wifi, now i get
AP:i9505xxugng8
CP:I9505xxufnc9
csc:i9505yxygnh2
Thanks for your help so far.
Click to expand...
Click to collapse
Reflash the same firmware I gave ya coz at the final what you have to see when you dial *#1234# is this:
AP: i9505XXUGNG8
CP: i9505XXUGNG8
CSC: i9505BTUGNG2
sorry just realised i flashed a slightly newer firmware, currently have the one you said downlaoding, about 2 hours download time currently. i just tried the gng8 wifi fix aswell but no difference, willw ait on this downloading, thanks.
tbkbt said:
sorry just realised i flashed a slightly newer firmware, currently have the one you said downlaoding, about 2 hours download time currently. i just tried the gng8 wifi fix aswell but no difference, willw ait on this downloading, thanks.
Click to expand...
Click to collapse
You will solve the problem if you flash the stock rom i was telling ya before
Joku1981 said:
You will solve the problem if you flash the stock rom i was telling ya before
Click to expand...
Click to collapse
im now getting
AP: i9505XXUGNG8
CP: i9505XXUGNG8
CSC: i9505BTUGNG2
went through the steps above, reset to factory and wifi wont turn on, it goes to the 1 but greyed out then jumps back to 0
I wont touch anything until you say this time
tbkbt said:
im now getting
AP: i9505XXUGNG8
CP: i9505XXUGNG8
CSC: i9505BTUGNG2
went through the steps above, reset to factory and wifi wont turn on, it goes to the 1 but greyed out then jumps back to 0
I wont touch anything until you say this time
Click to expand...
Click to collapse
1) Root your device
2) File explorer, i used "Root Explorer"
3) Go to File System Root>system
4) Open built.prop
5) Search ro.securestorage.support=true, edit and change true to false (or viceversa, try the 2 options)
6) Save then file and reboot
Joku1981 said:
1) Root your device
2) File explorer, i used "Root Explorer"
3) Go to File System Root>system
4) Open built.prop
5) Search ro.securestorage.support=true, edit and change true to false (or viceversa, try the 2 options)
6) Save then file and reboot
Click to expand...
Click to collapse
Can I root using towel root? Think u saw a thread that said on higher firmwares you needed to use mobile odin pro and it also got rid of knox?
Thanks
tbkbt said:
Can I root using towel root? Think u saw a thread that said on higher firmwares you needed to use mobile odin pro and it also got rid of knox?
Thanks
Click to expand...
Click to collapse
You don't need it coz your KNOX:0x1. You can root your device with other methods like HERE.
Joku1981 said:
You don't need it coz your KNOX:0x1. You can root your device with other methods like HERE.
Click to expand...
Click to collapse
still no wifi unfortunately, any other ideas?
tbkbt said:
still no wifi unfortunately, any other ideas?
Click to expand...
Click to collapse
Try this APP.
Joku1981 said:
Try this APP.
Click to expand...
Click to collapse
the app gets stuck at
"deleting profiles
reading profiles"
tbkbt said:
im now getting
AP: i9505XXUGNG8
CP: i9505XXUGNG8
CSC: i9505BTUGNG2
went through the steps above, reset to factory and wifi wont turn on, it goes to the 1 but greyed out then jumps back to 0
I wont touch anything until you say this time
Click to expand...
Click to collapse
Seems to be a hardware issue. Remember dont mixmatch bootloaders and everything they are the ones that mess up with WiFi very easily. Reset your phone once more go into download mode and flash the latest firmware for your phone 2 times. If that doesn't work then you have a hardware issue.
Joku1981 said:
Try this APP.
Click to expand...
Click to collapse
just looked at the phone info app again, i noticed that the bootloader and baseband are different versions, is this correct?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just curious if you have flashed the ROM @Joku1981 gave you the link for a second time? That should also correct the bootloader issue you're having. It should be the same as the baseband.
Strephon Alkhalikoi said:
Just curious if you have flashed the ROM @Joku1981 gave you the link for a second time? That should also correct the bootloader issue you're having. It should be the same as the baseband.
Click to expand...
Click to collapse
no, i only flashed it the once, should i do it 2 times in succesion?
thanks

[Q][noob] Note 4 N910F still with android 5.0.1

Hey guys
I may sound noob but the fact that my phone is still under android 5.0.1 drives me crazy (recent apps lag etc).
I've been checking for updates (OTA) but "Latest Updates have already been installed" message pops up.
I bought the phone from Cyprus (2nd hand) and as far as I am concerned it is fully stock (non-rooted).
Was my device supposed to receive the 5.1.1 update OTA, since other Note 4s in Cyprus were updated to 5.1.1 ?
Thanks!
Anyone guys ?
Was you phone rooted before? I am not sure of what i am going to say, but maybe if it was rooted you might not get official OTA. Turn off the phone, press POWER + HOME + VOLUME UP, and on the top left corner theres a Knox counter, check if it is 0x0 or 1x1. I am new to this phone and i have heard in some of the 2014/2015 phones if you root even if you unroot you won't be able to update via OTA. Hope it helps
Enviado do meu SM-N910F através de Tapatalk
Dedzdedz said:
Was you phone rooted before? I am not sure of what i am going to say, but maybe if it was rooted you might not get official OTA. Turn off the phone, press POWER + HOME + VOLUME UP, and on the top left corner theres a Knox counter, check if it is 0x0 or 1x1. I am new to this phone and i have heard in some of the 2014/2015 phones if you root even if you unroot you won't be able to update via OTA. Hope it helps
Enviado do meu SM-N910F através de Tapatalk
Click to expand...
Click to collapse
That's incorrect even if you trip your knox counter you can still receive otas, your phone has to be fully stock however to receive the otas. If you go to settings about and software information your device status should be 'official'. Another way to check is to boot into download mode (Volume Down + Home + Power button) and check if all the system are official. If they are then you are good to go.
OTAs are usually released in waves so that might be the problem.
Anyhow you can manually update your phone using Odin.
Download this firmware file : http://www.sammobile.com/firmwares/download/56036/N910FXXU1COI1_N910FVFG1COH5_CYV/
Then extract it and put your phone in download mode and connect it to your PC then run Odin as admin. (Make sure Kies is uninstalled)
Put the file in PDA and flash the firmware to your device.
As i said i was not sure, nice someone showed up to help [emoji1]
Enviado do meu SM-N910F através de Tapatalk
Dedzdedz said:
As i said i was not sure, nice someone showed up to help [emoji1]
Enviado do meu SM-N910F através de Tapatalk
Click to expand...
Click to collapse
Thank you for your time. Appreciate it!
Battlehero said:
That's incorrect even if you trip your knox counter you can still receive otas, your phone has to be fully stock however to receive the otas. If you go to settings about and software information your device status should be 'official'. Another way to check is to boot into download mode (Volume Down + Home + Power button) and check if all the system are official. If they are then you are good to go.
OTAs are usually released in waves so that might be the problem.
Anyhow you can manually update your phone using Odin.
Download this firmware file : http://www.sammobile.com/firmwares/download/56036/N910FXXU1COI1_N910FVFG1COH5_CYV/
Then extract it and put your phone in download mode and connect it to your PC then run Odin as admin. (Make sure Kies is uninstalled)
Put the file in PDA and flash the firmware to your device.
Click to expand...
Click to collapse
First of all thank you for your time!
Device Status in Settings -> About is Official.
So, how can I make sure that this is the right Firmware to flash (as the phone was bought from Cyprus 2nd hand, and Im not sure if the other guy bought it from an other country in Europe) ?
Moreover, If i manually install the firmware file, as you stated, do I need to root the phone or something ? Or the device will be 100% official (its just that you install the update through the pc instead of OTA )?
It seems to be taking too long for the OTA, and that's why I was worried.
Thank you again!
Snake_A said:
First of all thank you for your time!
Device Status in Settings -> About is Official.
So, how can I make sure that this is the right Firmware to flash (as the phone was bought from Cyprus 2nd hand, and Im not sure if the other guy bought it from an other country in Europe) ?
Moreover, If i manually install the firmware file, as you stated, do I need to root the phone or something ? Or the device will be 100% official (its just that you install the update through the pc instead of OTA )?
It seems to be taking too long for the OTA, and that's why I was worried.
Thank you again!
Click to expand...
Click to collapse
The firmware is fully stock, untouched.
You do not need to be rooted to flash the firmware.
You can install this app on your phone and check your CSC
So This is what I get:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I suppose it is a Greek version. So, which firmware shall i download ? (There are 3 different firmwares : Greece, Greece Cosmote, Greece Vodafone. Greece has no 5.1.1 version only the latter two have.
Snake_A said:
So This is what I get:
I suppose it is a Greek version. So, which firmware shall i download ? (There are 3 different firmwares : Greece, Greece Cosmote, Greece Vodafone. Greece has no 5.1.1 version only the latter two have.
Click to expand...
Click to collapse
Might I ask are you in the UK (Your current operator) If so you can attempt to flash the UK firmware.
If however you are living in Greece then you could flash one of the Greece firmwares and then flash a stock ROM (It will require a custom recovery, tripping KNOX counter) without the bloat.
The choice comes down to you, another last resort if you don't want to trip KNOX would be to flash a neighbouring country's firmware.
Battlehero said:
Might I ask are you in the UK (Your current operator) If so you can attempt to flash the UK firmware.
If however you are living in Greece then you could flash one of the Greece firmwares and then flash a stock ROM (It will require a custom recovery, tripping KNOX counter) without the bloat.
The choice comes down to you, another last resort if you don't want to trip KNOX would be to flash a neighbouring country's firmware.
Click to expand...
Click to collapse
Basically I am from Cyprus but I'm currently studying in the UK. So what's the difference between the various firmwares ? I thought that only the one that is the same as the country you bought the phone is compatible.
Snake_A said:
Basically I am from Cyprus but I'm currently studying in the UK. So what's the difference between the various firmwares ? I thought that only the one that is the same as the country you bought the phone is compatible.
Click to expand...
Click to collapse
Different country firmware can be flashed only sometimes it fails (nothing to worry about) in that case you might have re-package the firmware. Meaning you put the CSC from your country into the firmware.
Anyhow I would you to flash this firmware via Odin:
http://www.sammobile.com/firmwares/download/58473/N910FXXU1COJ3_N910FOXA1COJ3_DBT/
After downloading the firmware extract the file inside (using WinRar or equivalent)
A factory reset might be required to back-up everything from your phone as the internal storage will be wiped.
Uninstall Samsung Kies, install these USB drivers: https://www.androidfilehost.com/?fid=24052804347849220
Download Odin: https://www.androidfilehost.com/?fid=24052804347836222
Power down your phone, hold volume down key + Home key and power on the device. Press volume up to continue when promoted.
Connect your phone to your PC via USB.
Run Odin as admin and and put the extracted firmware file in AP and press start.
The phone should now reboot, let it do it's thing. If after around 10 minutes it's still at the Samsung screen.
Power off the device hold volume up + home + Power the device on and using the volume keys select wipe data and cache, then reboot.
Good luck, as always I must give the disclaimer that anything you do with your device is your responsibility.

GPS has gone whack

Hey guys,
Have been running a 4.4 ROM for a while (900i) and I finally bit the bullet and installed Phoenix Rom (900F).
It worked fantastically (aside from the NFC). I did notice the GPS failed to hookup. This was a problem so I restored my kitkat backup. However....
The GPS now no longer works!!? I download an original Kitkat Rom for my provider (optus) off Sammobile. Flashed with it with Odin and still it fails to connect.
Googling has led me to no immediate resolutions. I flashed 4.4 stock again with Odin and did a 5.0 Lollipop update OTA in hope that it would fix things.
It hasn't worked thus far. Was hopefing someone would know what was going on or could provide me with some guidance.
Cheers.
Tried a full factory reset from recovery / android settings after flashing the stock ROM ?
*Detection* said:
Tried a full factory reset from recovery / android settings after flashing the stock ROM ?
Click to expand...
Click to collapse
Yep. Still no dice.
Only other thing I can think of is to grab the correct PIT file for your model S5, flash that and a stock ROM at the same time using ODIN
If it still doesn't work after that, it sounds like a hardware issue
You say your phone is the G900I? And you flashed a G900F ROM to it?
Other than that, make sure other devices can get a GPS lock, make sure it's not just the weather stopping it working
*Detection* said:
Only other thing I can think of is to grab the correct PIT file for your model S5, flash that and a stock ROM at the same time using ODIN
If it still doesn't work after that, it sounds like a hardware issue
You say your phone is the G900I? And you flashed a G900F ROM to it?
Other than that, make sure other devices can get a GPS lock, make sure it's not just the weather stopping it working
Click to expand...
Click to collapse
Not exactly sure where to get the correct PIT file to flash.
I'll try disabling all weather settings though, didn't think of that one. Cheers
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Scroll down and choose your model S5 PIT, Extract to .pit, add to PIT section, and flash with the stock ROM in AP or PDA section as normal
And I meant the weather outside stopping the phone seeing the satellites, heavily cloudy days can cause problems sometimes, but check settings, connections, location, is set to high accuracy
*Detection* said:
Tried a full factory reset from recovery / android settings after flashing the stock ROM ?
Click to expand...
Click to collapse
*Detection* said:
Only other thing I can think of is to grab the correct PIT file for your model S5, flash that and a stock ROM at the same time using ODIN
If it still doesn't work after that, it sounds like a hardware issue
You say your phone is the G900I? And you flashed a G900F ROM to it?
Other than that, make sure other devices can get a GPS lock, make sure it's not just the weather stopping it working
Click to expand...
Click to collapse
*Detection* said:
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Scroll down and choose your model S5 PIT, Extract to .pit, add to PIT section, and flash with the stock ROM in AP or PDA section as normal
And I meant the weather outside stopping the phone seeing the satellites, heavily cloudy days can cause problems sometimes, but check settings, connections, location, is set to high accuracy
Click to expand...
Click to collapse
Damn... 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again' :crying:
This is what I ran:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: Running it again. Appears to be running. I think my USB hub died which is why it 'failed'. Installing applications now and will post back as to whether the GPS is working or not.
I actually have a place to be which is why I'm desperately trying to fix things.
Unfortunately it hasn't fixed the GPS. I'll have to print out the Google Maps instructions.
EDIT 2: Tried this:
Open Phone, as if you were going to make a phone call and dial -
*#9090# (*#197328640# if that doesn't work)
Menu, select Key Input, enter Q
Menu, select Key Input, enter 0000
wait for the next menu. (It takes a while.)
UMTS->COMMON->NV REBUILD->NV REBUILD->SYSTEM->PROTOCOL->GPS->IMS
or, if you don't have UMTS:
UE SETTINGS & INFO->SETTING->SYSTEM->NV REBUILD->ALL
Click to expand...
Click to collapse
No cigar. Will to another factory reset when I have a chance.
EDIT 3: Did another factory reset through the menu and it said location set my GPS. I nearly fell over!
We're working. Thanks for all your help *Detection*
Great!
Hi there , i've had the same problem when installing a custom rom like PopWiz Telstra or other rom don't no why but this fix works for me every time :
Install latest rooted TW (original Samsung Touch wiz rom) like (Alexandr ROM )
Install from play store Shortcut Master or Phone Info
Open ‘Secret Code Explorer’ menu, scroll down to 27663368378 and launch it (select ‘Launch 0’, root is required).
Then select the latest menu option Hardware sensors
Then the latest option restore (rebuild) NVRAM (or something like that. I’m writing this from my memory )
Reboot the phone
Try GPS – it should work
I have just copy paste it from a site in works like a charm on g900f
Alright. I'm unhappy with the Optus Lollipop 5.0 stock. I can't install xposed because its odexed so I'm going back to the Phoenix 900F!
This time I'm going to install it with TWRP.
Will then go through the troubleshooting attempts in an attempt to have a GREAT rom with a fully functional GPS!~

Please help me with my S7 Edge SM-G935F

Hello everyone,
My brother has just offered me a s7 edge SM-G935F / 32G, Rom stock without operator that he used for 2 months after purchase.
My pb is that after resertting this phone, then reboot, I am asked the google account with which this phone was syncing (it's of my bro). Normal!
Then I enter the data account google of my brother and then Passwords ... and there, a verification code sent him that communicates me by sms after receiving.
But helas, every time I get it, the phenomenon is repeated and so I can not use the phone for use!
My idea was to flash the last ROM Stock...but no way, the pb is always the same...the warning message !
For info, the dl and recovery mode are operational but I am without root so without TWRP and other ++++
However, the dev mode of the system is not activated too ...
Thank you for your help...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
B
sorry for my bad english !:silly:
Bishopandme said:
Hello everyone,
My brother has just offered me a s7 edge SM-G935F / 32G, Rom stock without operator that he used for 2 months after purchase.
My pb is that after resertting this phone, then reboot, I am asked the google account with which this phone was syncing (it's of my bro). Normal!
Then I enter the data account google of my brother and then Passwords ... and there, a verification code sent him that communicates me by sms after receiving.
But helas, every time I get it, the phenomenon is repeated and so I can not use the phone for use!
My idea was to flash the last ROM Stock...but no way, the pb is always the same...the warning message !
For info, the dl and recovery mode are operational but I am without root so without TWRP and other ++++
However, the dev mode of the system is not activated too ...
Thank you for your help...
B
sorry for my bad english !:silly:
Click to expand...
Click to collapse
You are facing FRP issue which is factory reset protection security feature by google..So everytime you will reset your device, you will be askd for the same google account which was previously added to device..Are you on marshmallow or nougat? IF your phone is functioning well then enable developers option by pressing build no for 7-8 times from software info you will find in about device from settings..After enabling developers option enable Oem unlocking..Hope this will help you..You can also flash latest stock firmware for your device usinh odin after enabling Oem unlocking from developers option
@DroidHackeR,
I'm in nougat because i have flash the latest Rom Stock yet with odin (4 files) + factory restet!
But the pb is the same...because i can't enable Oem unlocking from developers option by pressing build no for 7-8 times from software info
I have no access to do that, My procedure stops until the moment to put the login of gmail ... I do not go beyond that after the flash !
Another idea pl?
How can i enable Oem option directly by odin for example?
I can't flash custom rom because of it too...
Ths for your help.
B
Bishopandme said:
@DroidHackeR,
I'm in nougat because i have flash the latest Rom Stock yet with odin (4 files) + factory restet!
But the pb is the same...because i can't enable Oem unlocking from developers option by pressing build no for 7-8 times from software info
I have no access to do that, My procedure stops until the moment to put the login of gmail ... I do not go beyond that after the flash !
Another idea pl?
How can i enable Oem option directly by odin for example?
I can't flash custom rom because of it too...
Ths for your help.
B
Click to expand...
Click to collapse
Just download latest 7.0 stock firmware for your device from sammobile.com though your already on nougat..firmwares there are updated according to security patches timely..so my suggestion is download latest nougat firmware for your model and country and flash usinh odin as described above..You will boot normally...If after flashing latest nougat if your device stuck at Samsung logo i.e. called bootloop..Press volume up+power +home button, you will boot into stock recovery..from there choose wipe data/factory reset option..you will boot up normally..
---------- Post added at 02:48 PM ---------- Previous post was at 02:40 PM ----------
Bishopandme said:
@DroidHackeR,
I'm in nougat because i have flash the latest Rom Stock yet with odin (4 files) + factory restet!
But the pb is the same...because i can't enable Oem unlocking from developers option by pressing build no for 7-8 times from software info
I have no access to do that, My procedure stops until the moment to put the login of gmail ... I do not go beyond that after the flash !
Another idea pl?
How can i enable Oem option directly by odin for example?
I can't flash custom rom because of it too...
Ths for your help.
B
Click to expand...
Click to collapse
You can also refer this video by root junky which will give you option to overcome frp
https://m.youtube.com/watch?v=JzywoFS_r9U&time_continue=2
Ah ok...just after the reboot i doesn't let the phone start and must to reboot in recovery mode for doing the wipes and reset option.
ok i will do it as soon as...
wait for a moment pl!
B
@DroidHackeR,
i have just test your first idea and...it dosen't work !
I will test the video way ...it's seem no easy to me!
Ths for your help.
B
Bishopandme said:
@DroidHackeR,
i have just test your first idea and...it dosen't work !
I will test the video way ...it's seem no easy to me!
Ths for your help.
B
Click to expand...
Click to collapse
Go ti video reference and follow the steps carefully hope it will help you..Or another tricks are there to overcomd FRP issue i.e. using adb commands and otg cable..You can search on google.
DroidHackeR said:
Go ti video reference and follow the steps carefully hope it will help you..Or another tricks are there to overcomd FRP issue i.e. using adb commands and otg cable..You can search on google.
Click to expand...
Click to collapse
when i read the differents backs experiences...there's apparently a pb with the camera step way!
They said "On Samsung Galaxy s6 Edge plus there is no camera when you restart the phone. What's the Problem?"
and others phones too....
:crying:
i find this....for S7 Edge
https://www.youtube.com/watch?v=ChC...id=video:3e542a13-8bf9-4684-b336-004044a96320
tic tac
Bishopandme said:
i find this....for S7 Edge
&feature=iv&src_vid=JzywoFS_r9U&annotation_id=video%3A3e542a13-8bf9-4684-b336-004044a96320
tic tac
Click to expand...
Click to collapse
Yes refer this video to overcome FRP...Watch the video carefully and follow the steps described
Hi @DroidHackeR,
I realize that this video is no longer current because dating several months ... besides, nothing makes clear if this manupulations was made under Nougat or old versions ...
Recent updates may have blocked it, hence the large number of errors identified ...
what do you think?
Thank you !
B
Bishopandme said:
Hi @DroidHackeR,
I realize that this video is no longer current because dating several months ... besides, nothing makes clear if this manupulations was made under Nougat or old versions ...
Recent updates may have blocked it, hence the large number of errors identified ...
what do you think?
Thank you !
B
Click to expand...
Click to collapse
Will you please checkout the video i am going to provide link below? It claims about bypass of google FRP protection on devices running Nougat..i.e.s7edge is also included..Please watch this video carefully and report if it helped you or not
http://pangu.in/nougat-remove-google-verify-account-samsung-frp/
@DroidHackeR, OUrahhhh!!!!
Successfully with this method, look here: ....https://www.youtube.com/watch?v=8g4MG0ZRF1M&t=67s
Ths for all !
Enjoy !
B
Bishopandme said:
@DroidHackeR, OUrahhhh!!!!
Successfully with this method, look here: ....
&t=67s
Ths for all !
Enjoy !
B
Click to expand...
Click to collapse
Ohhhk dear @Bishopandme i am very glad to see your phone is saved and all of our quotes and comments are reserved in this thread to help any other suffering from same issue..Cheers..

Categories

Resources