Related
Since the battery life of the phone is quite poor it's only natural that i would like to charge it when i'm on class or with an usb cable when im using my laptop, using other usb chargers/cables, but on the manual says (of course) that we should only use it with the lg charger that comes in the box or an official nexus 4 charger .
It kinda sounds like bullsh*t until i remember what happened with my motorola milestone, sometimes when i used another charger the screen started doing crazy things, like swipping the homescreens by itself , oppening apps, until i charged it for at least a few minutes with the official charger, some months later my digitalizer died, so you can imagine how traumatized i am, but then i think what's the point of trying to make a standard out of microusb chargers if we can only use the official charger? what do you guys think?
I find battery life to be very good.
I have been using an old HTC charger on mine without issue though. I suspect the 'only use LG charger' is to cover themselves in case you kill the device with a cheap and badly made knock off.
Sent from my Nexus 4 using xda app-developers app
AW: We can only use the LG charger?
I have literally problems in draining my battery, running Franco's Kernel and Minco v6.
Anyway, using another charger should be no problem. I used the charger of my Asus Transformer and a mobile charger in my car without issues.
sent from my francoed Nexus 4
templope athletes,"
Feel free to use any USB wallcharger you'll find.
I tried some i had laying around (HTC, iPhone 5, iPad) and they all charged without trouble.. :good:
Yeah, I've used a 1A HTC charger with no issue. I accidentally left my lg charger at a friends house and had to use what I had.
the battery life is good, better than s2 with its extended battery, i was wondering about this too as i want to use a sony rx100 at 2amps to charge while im traveling.
on page 168 of the service manual it states the max charging current is set at 900mah, over voltage protection upto 28volts
The current should be controlled by the phone, not the charger. Therefore there shouldn't be a problem with more powerful chargers. The voltage has to be correct, though
The phone certainly regulates the power it takes.
If you are really worried about the chargers just flip them over and read the output ratings. Most of them are exactly the same these days.
Sent from my Nexus 4 using xda app-developers app
I use my GNex charger with no problems.
P.s- the battery life on this device is outstanding, you just need to find the kernel that works well on your device
Sent from my Nexus 4 using XDA Premium HD app
Any USB charger will work. Note the output current on the charger though, as that will impact how fast it can charge and whether or not you can have the screen on while you charge. The LG charger that comes with the phone is 5v 1.2a, an iPhone charger (at least as of the 4S when I got mine) is 5v 1a and an Amazon Kindle charger is 5v 0.85a. The USB 2.0 spec calls out a max power output of 5v 0.5a.
EnIXmA said:
I use my GNex charger with no problems.
P.s- the battery life on this device is outstanding, you just need to find the kernel that works well on your device
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
+1 for the GNex charger.
[email protected] said:
Any USB charger will work. Note the output current on the charger though, as that will impact how fast it can charge and whether or not you can have the screen on while you charge. The LG charger that comes with the phone is 5v 1.2a, an iPhone charger (at least as of the 4S when I got mine) is 5v 1a and an Amazon Kindle charger is 5v 0.85a. The USB 2.0 spec calls out a max power output of 5v 0.5a.
Click to expand...
Click to collapse
I'm confused , the lg nexus 4 charger is 5.0v 1.2A and my galaxy nexus charger which i use sometimes with my nexus 4 is 5.0V 1.0A , what does this mean? what's the difference?
My Nexus 4 is on the way so i cant comment on that but my Sony Xperia S acts differently to different USB leads even on the same charge unit. It might charge at 500mAh or 950mAh (on a charger rated at 850mAh), the screen might be fine or it might act erratic and it all depends on the lead plugged in to the charger
I used Samsung/blackberry chargers and they worked. Not sure if they were as efficient though.
I pretty much use anything but the LG charger and have been doing so over a month. So feel free to use any quality charger you like.
I also charge of my Philips Qi pad and off computer USB ports.
As long as it's providing stable power or anything close to it, it's good.
Just be careful with (fake) cheapo chargers. Those might cause issues with the touchscreen going haywire while charging off them. I've also read that about some car chargers, but so far my cheap 2A 2port USB car charger that came of DX is working fine for me.
YMMV of course. But there is no need to stick to just the LG charger.
Hi all,
Ok, so I finally managed to order a 16Gb Nexus 4 and hopefully it will be with me in 1 week or so.
And I was wondering one thing regarding the AC adapter: I believe (pls correct me if I am wrong) that the original AC adapter’s output voltage is DC 5V, 1.2A.
I will need an extra AC adapter to keep it at work and I was planning to use one of those:
- The Sony Xperia P AC adapter will output 5V, 1,5A
- The Samsung Galaxy S AC adapter will output 5V, 0,7A
It is clear that neither of those 2 chargers will match exactly the specifications of the original Nexus charger (same voltage, but different amperage).
So, here goes the questions:
1) Is there any problem if I use a charger that will output the same voltage but with different amperage?... if not, which one would you use and why?.
2) how the amperage affect to the charging process?.
Thanks all in advance
PS: sorry for terrible English
You can use any charger up to 2 amps.
Sent from my Nexus 4 using xda app-developers app
Evergreen74 said:
Hi all,
Ok, so I finally managed to order a 16Gb Nexus 4 and hopefully it will be with me in 1 week or so.
And I was wondering one thing regarding the AC adapter: I believe (pls correct me if I am wrong) that the original AC adapter’s output voltage is DC 5V, 1.2A.
I will need an extra AC adapter to keep it at work and I was planning to use one of those:
- The Sony Xperia P AC adapter will output 5V, 1,5A
- The Samsung Galaxy S AC adapter will output 5V, 0,7A
It is clear that neither of those 2 chargers will match exactly the specifications of the original Nexus charger (same voltage, but different amperage).
So, here goes the questions:
1) Is there any problem if I use a charger that will output the same voltage but with different amperage?... if not, which one would you use and why?.
2) how the amperage affect to the charging process?.
Thanks all in advance
PS: sorry for terrible English
Click to expand...
Click to collapse
You must use a 5V AC USB Adapter and better no LESS than 1A
for Fast Charge.
AC Adapter I Use:
iPad AC Adapter 5V 2.1A at Work
PlayBook AC Adapter 5V 1.8A at Home 1
Original Nexus 4 AC 5V 1.2A at Home 2.
Our Nexus 4 will Draw around 0.8A when Batt lever at 0% - 80%,
then around 0.5A at 80%-95%, Final State 95%-100% will draw 0.2A roughly.
When 100%, Nexus 4 will use the AC power & the Current "A" show on phone
will like 2mA (0.002A) when idling.
** 1A = 1000mA
As previous poster said, do not go under 1.2amp.
I run the OEM charger in my bed room, a USB charger to my computer, and a 2.1amp charger in the car.
Sfkn2 said:
As previous poster said, do not go under 1.2amp.
I run the OEM charger in my bed room, a USB charger to my computer, and a 2.1amp charger in the car.
Click to expand...
Click to collapse
Why do you say not to go under 1.2A? Charging from a laptop is at .5A. I've been using a 1A charger since day one. Haven't experienced any issues with it.
Charging at a lower amperage shouldn't hurt anything, just charge slower. All you have to do is make sure it's a 5V charger. Amperage shouldn't matter but a lower amp charger will charge slower. As for a higher amp charger, the phone will only draw the amount of power it needs to charge so using 2A charger won't hurt anything either.
Also 2mA is 0.002A not 0.02 A
wilsonlam97 said:
You can use any charger up to 2 amps.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Since the charger doesn't actually regulate the charging itself (the phone does this) it doesn't matter how many amps it can supply, could be 100 amps, no worries. As long as it is 5V, the phone will draw as many amps as it needs.
Since the supplied charger is 1.2A rated, it's fair to assume that the phone will never actually try to draw any more than that, so there will be no benefit in going higher.
Going for a lower current charger will likely extend the charge time.
I use a 2.1 amp daily without any issues.
Sent from my Nexus 4 using Tapatalk 2
Wow guys!!... thanks all for your answers!!
So, if I understood correctly, the amperage will only affect to the charging time, meaning that by using the Xperia P AC adapter (1,5A) the battery will be charged faster that using the Galaxy S one (0,7A)... right?
Pls allow one last question: a few yeard ago, I think I read in some forums that a slower charging process could help to keep the batteries in the best conditions for a longer time... is this still true with modern batteries??
Again, THANKS all for your help!!
Evergreen74 said:
Wow guys!!... thanks all for your answers!!
So, if I understood correctly, the amperage will only affect to the charging time, meaning that by using the Xperia P AC adapter (1,5A) the battery will be charged faster that using the Galaxy S one (0,7A)... right?
Pls allow one last question: a few yeard ago, I think I read in some forums that a slower charging process could help to keep the batteries in the best conditions for a longer time... is this still true with modern batteries??
Again, THANKS all for your help!!
Click to expand...
Click to collapse
Yes, the .7A charger will take a little longer to charge you phone.
On the other answer, I think NO but I'm not as familiar with LiPo batteries. I would venture to say that .7A vs 1.2A (max the phone will draw but I think someone above mentioned it's even less than that when the battery is very low) is not going to make a bit of difference in your battery life.
One thing I do know about LiPo's is you do not trickle charge them. So while plugged in it will charge at the rates mentioned above until full and then it QUITS charging all together. Once the phone discharges the battery to a certain level, it will charge it back up again. Probably at 98-99%.
There may be one other thing to consider when selecting a third party charger. In the Nexus 7, the device looks for pins 2 & 3 (data) of the USB plug to be shorted in order for it to draw full current. If this pins are open (or have a load across them as is the case with iPhone/iPad chargers), the Nexus 7 will assume it is plugged into a computer and limit its draw to 500MA.
Not certain the Nexus 4 behaves the same way but would assume so.
setzer715 said:
Yes, the .7A charger will take a little longer to charge you phone.
On the other answer, I think NO but I'm not as familiar with LiPo batteries. I would venture to say that .7A vs 1.2A (max the phone will draw but I think someone above mentioned it's even less than that when the battery is very low) is not going to make a bit of difference in your battery life.
One thing I do know about LiPo's is you do not trickle charge them. So while plugged in it will charge at the rates mentioned above until full and then it QUITS charging all together. Once the phone discharges the battery to a certain level, it will charge it back up again. Probably at 98-99%.
Click to expand...
Click to collapse
setzer715, thanks for the answer... I think I will be using the Xperia P charger at work...
Thanks all for your help!!
I want to make this case clear. According to my Charging log,
Here is some key point.
Nexus 4 Max Draw Rate at Fast Charge Mode is around 800-900mA,
even you use a Charger that rated at 1A (iPhone Tofu), 1.2A (Original),
1.8A (Playbook), 2.1A (iPad).
Fast Charge Mode must be with Charging Cable with 2&3 pin Shorted,
or the charger itself have the 2&3 pin already shorted.
Therefore, 1A is a Sweet spot for getting Charger & Charging Time for
Li-Po/Li-Ion/Ni-MH Batt charging.
If you use under 1A Charger, eg 700mA or 500mA, it will take much longer
to charge the batt but no harm as well. Just too slow only.
The stock charger that came with my phone sucks, I use one from my epic 4g touch (gs2)and it charges much better
DEVICE: Nexus 4
KERNEL: Franco r95
ROM: PROJECT Extinct Life Event
jlear3 said:
The stock charger that came with my phone sucks,
Click to expand...
Click to collapse
Why you say so...? What's wrong with it...?
Talon88 said:
Why you say so...? What's wrong with it...?
Click to expand...
Click to collapse
Left a phone on a charger all night with a long (10ft) cable and it couldn't even charge the phone over night. I know a 10ft cable will slow things down but my gs2 plug has no problem charging my phone. Search around and you'll find a few fail stories about the stock LG charger.
Sent from my Nexus 4 using Tapatalk 2
I have a question regarding chargers and the amps they put out.
While the stock wall charger is a 1amp charger, will a 2.1A charger damage the battery in my Nexus 4? I know 2.1 is usually for tablets, portable gaming systems, but does it damage our cell phone batteries, or just charge them faster?
thanks
mzeigler1 said:
I have a question regarding chargers and the amps they put out.
While the stock wall charger is a 1amp charger, will a 2.1A charger damage the battery in my Nexus 4? I know 2.1 is usually for tablets, portable gaming systems, but does it damage our cell phone batteries, or just charge them faster?
thanks
Click to expand...
Click to collapse
2.1A just means it _can_ output a maximum of 2.1A
But the Phone itself will "decide" how much current it draws for charging.
So no need to worry, it will not damage the battery. But it will very likely also not charge it faster.
I myself also used different chargers including the higher amp one from the Nexus 7.
so
You saw no difference in charging time compared to the 1 amp charger?
mzeigler1 said:
You saw no difference in charging time compared to the 1 amp charger?
Click to expand...
Click to collapse
I did not specifically think about it...I can test some other time right now my phone is fully charged.
But I guess the charger is adopted to the maximum charge current the phone can use.
I believe the phone can pull more than 1A if the charger is capable of delivering a higher amperage
Sent from my Nexus 4 using xda app-developers app
Thanks for the help guys! It worked.
Any idea why I can't seem to get the phone to actually charge in a vehicle while I am using Google Maps/Navigation or even just Spotify. I tried turning the brightness way down (can't read it), and tried turning Fast Charge on via Toggle. What does Fast Charge do anyway?
I am using a good 2.1A vehicle charger with a good USB cable. Is this normal even for stock ROM? I do know signal strength has a say in that. I just did 6 hours of driving and my battery dropped from 100% down to 60% by the end of the trip. I know it's more than not having it plugged in..
I am currently on AOKP ROM Milestone 2.
Im on a s3 with a s4 rom chaos latest same problem ! Get hot battery as well seems to even out if blue tooth is off its a 4.2.2 problem /glitch
Sent from my GT-I9300 using xda premium
You guys may have weak batteries. I had a bad battery right out the box. While charging in the car, my battery level would drop rather than rise. I took the battery back to the Sprint store where I bought the phone and they load tested the battery and said that it was bad (they have a special load tester for phone batteries). They gave me a new battery out of another, brand-new S4 box. One of the advantages of buying stuff in a store is getting better service (not always, but usually).
Seems strange.. I plan on getting a spare OEM battery anyway. I guess I'll try another battery and see what happens. Got the phone @ Best Buy.
I just did a test out of curiosity. I left my house and my battery was at 58%. I plugged it into my car charger and turned on gps navigation and played music. Twenty minutes later I was at 70%. I am using my stock odexed mf9 with all of my mods.
What is this fast charge toggle?
Sent from my SPH-L720 using Tapatalk 4
You need to get a 2 amp car charger. The white samsung block that comes with the S4 and note 2 use 2 amps vs the 1 amp charger that you prob have in the car. If you use any applications that draw a lot of battery, the 1 amp charger will basically keep the battery elevated, when I am watching a youtube my battery does not "charge" and if it does it charges very very slowly on a 1 amp charger. Most places that sell chargers will have a 1 amp charger so you need to look for 2 amps or "rapid" charger, which are most likely 2 amp chargers. Just make sure it's from a credible manufacturer as well, that ebay **** will allow spikes from your vehicles charging system and decrease battery life.
mista_k said:
You need to get a 2 amp car charger. The white samsung block that comes with the S4 and note 2 use 2 amps vs the 1 amp charger that you prob have in the car. If you use any applications that draw a lot of battery, the 1 amp charger will basically keep the battery elevated, when I am watching a youtube my battery does not "charge" and if it does it charges very very slowly on a 1 amp charger. Most places that sell chargers will have a 1 amp charger so you need to look for 2 amps or "rapid" charger, which are most likely 2 amp chargers. Just make sure it's from a credible manufacturer as well, that ebay **** will allow spikes from your vehicles charging system and decrease battery life.
Click to expand...
Click to collapse
Like he said, a quality charger is the key, and the problem with most car chargers are they aren't wired correctly. When the charger communicates to the phone it will appear as a usb charger and then the phone will only charge at .5 amps because it thinks its charging from a usb port instead of a charger. There are mods out there to mod the chargers so the phone thinks its connected to a wall charger and will charge much faster.
I was kind of wondering if there would be a better car charger out there for our phones. I've been using my old reliable VZ charger I've had since the Droid X. It does the job, but not as great as it should or could be. Haven't had any issues with it & charges okay. I'm due for a new one lol.
The problem is likely the cable you are using. After lots of research it became clear to me it is my USB cables that is stopping my nexus 4 and 7 from being charged in the car.
I bought a good quality dual 3.8A charger but couldn't get it to charge my N4 while using Co-Pilot UNTIL I changed the cable to a "charging only" cable. Basically the cable does not put the device in data mode and allows the device to be charged at higher rate than a normal data cable.
http://www.amazon.co.uk/gp/product/B0088HTYUE/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
P1NK13P13 said:
I was kind of wondering if there would be a better car charger out there for our phones. I've been using my old reliable VZ charger I've had since the Droid X. It does the job, but not as great as it should or could be. Haven't had any issues with it & charges okay. I'm due for a new one lol.
Click to expand...
Click to collapse
Best buy has Rocket Fish 2 and 3 amp chargers for the car that work great. They also have 2 usb input ones also. You can just buy the charging part and use any cable you want or buy the one with the cable.
This message brought to you in part by Sprint and the letters GS and the number 4
Any one Disappointed with the charger they included with the Pure. The non removable cord just sucks and a poor choice in my opinion
I'm more disappointed at the size of the wall wart. They could have made more friendly to other power strip users.
razor237 said:
Any one Disappointed with the charger they included with the Pure. The non removable cord just sucks and a poor choice in my opinion
Click to expand...
Click to collapse
Pretty sure they did that so you couldn't just stick any usb charging cord in their...it'd most likely fry it.
The disappointing part is the my other cords not working with Android auto. Luckily I have a nexus 6, and the cord with its charger works.
Sent from my P01MA using Tapatalk
brholt6 said:
Pretty sure they did that so you couldn't just stick any usb charging cord in their...it'd most likely fry it.
Click to expand...
Click to collapse
I guess that could be a reason but highly doubt anything would be fried. Ive been using a nexus 6 turbo charger and before that i was using a note 4 charger to charge multiple android/apple devices without issue. This just limits what i can charge on a single charger now need a second lol
razor237 said:
I guess that could be a reason but highly doubt anything would be fried. Ive been using a nexus 6 turbo charger and before that i was using a note 4 charger to charge multiple android/apple devices without issue. This just limits what i can charge on a single charger now need a second lol
Click to expand...
Click to collapse
If you plugged in a charging cord that can't handle the increased power it sure could fry the cord. I feel ya though...it would be nice if it were a USB cord.
I'm glad it looks different.... My son knows NOT to plug his HTC M7 into this charger.
I can see if this was someones first Android, the lack of a micro-USB for data would be frustrating, but I have about 5 of these in my desk drawer and throughout my house and office, so it doesn't bother me.
Also having a fixed cord means you don't pulg some 'slow' cable in and not get any benefits. Out my 8-10 micro USB cables, only 2-3 get a decent charge speed.
tele_jas said:
I'm glad it looks different.... My son knows NOT to plug his HTC M7 into this charger.
I can see if this was someones first Android, the lack of a micro-USB for data would be frustrating, but I have about 5 of these in my desk drawer and throughout my house and office, so it doesn't bother me.
Click to expand...
Click to collapse
If a device that does not do Turbo Charging is connected, the charger should automatically adjust and charge it at regular speed. At least, that's what it is supposed to do. The Turbo Charger is supposed to be the single charger for all types.
Sent from my Nexus 10 using Tapatalk
Darnell_Chat_TN said:
If a device that does not do Turbo Charging is connected, the charger should automatically adjust and charge it at regular speed. At least, that's what it is supposed to do. The Turbo Charger is supposed to be the single charger for all types.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Good, because I know I'll find his phone on that charger some day
I still have my galaxy s6 nexus charger that is a fast charging and it seems to work fine with turbo charging
Sent from my LG-H345 using XDA Free mobile app
I think the reason they made the cable fixed is because a lot of cheaper usb cables use very thin wire gauges. Since this charger puts out a lot of current at varying voltages, it's very possible for a thin cable to overheat easier and catch on fire. And my guess is, they didn't want to take any chances
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
I've got the same issue going on. My replacement from Amazon will be here Tuesday so I'll have time to mess with both and see if its the charger or what. Currently my turbocharging is hit or miss.
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
I have this issue sometimes to. So if I need to know if im charging at turbo I use an app from the app store to see if states I'm turbo Charging or not. In the Charging screen it will say "normal or Turbo"
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
You can use a USB voltage/current indicator device to see it directly. I use one that displays voltage and current simultaneously, it cost about $10 on Amazon.
The Qualcomm QC 2.0 (which Motorola terms "TurboPower) spec is 5, 9, 12, and 20 volts, with up to 2 amps plus at each voltage. The QC 2.0 chargers I've tested including the Motorola charger included with the XT1575, range up to 9V and about 2+ A at 9V, with the higher voltage/amperage when battery is discharged to a lower SoC.. Haven't seen 12V or 20V, I think those only come into play when battery is discharged to nearly zero SoC.
Agree the reason the included charger has cable attached may be to ensure adequate wire gage. Too-thin wire will increase voltage drop across cable thus lengthening charge time in higher power modes. But the design here uses higher voltage to keep current down around the same 2A max current of USB 2.0 chargers, so cable heat will not be a problem with any old USB cable.
I will attest to the benefit of QC 2.0. I thought it was a useless gimmick until I started using it. It does effectively compensate for mediocre battery capacity.
My "Turbo Charging" icon displays properly, but doesn't charge very quickly if connected to a cheap extension cord.
Plugged into the wall, the charging Stull doesn't impress me that much
Sent from my XT1575 using Tapatalk
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
It's defective. Call moto they will replace it for free. Just have to send copy of purchase receipt. Had the same issue.
The charge rate depends on how discharged the battery is when connected to charge.
More discharged (lower SoC, State of Charge) will drive a higher charge rate.
As to the difference between this Motorola TurboPower (aka Qualcomm Quick Charge 2.0), vs. other phones:
I've measured up to 1.4 amps at 5V nominal on other phones, that is about 9 watts charging power. That is max charge rate, with a very discharged battery. As the battery charges up closer to fully charged, the charge rate (power) is reduced. Total charging time from fully discharged to fully charged would be about 4-5 hours, give or take, for a typical cellphone battery.
For comparison, the QC 2.0 measurements I made with the MXPE: Up to 2.2 amps at 9V nominal with a phone battery discharged to about 40-50%. That works out to about 20 watts charging power. As with other Li-Ion battery charging systems, this also declines as the battery approaches fully charged. Total time to charge, from fully discharged to fully charged will be about 2-3 hours, give or take.
So the marketing claims about QC 2.0 are about right: A 75% improvement over conventional charging systems.
The biggest gains come when charging batteries discharged to lower SoC. If you are comparing charge rate/time of batteries discharged to only, say, 70-80%, you will not see as much of a difference with QC 2.0.
I'm not a QC 2.0 marketing shill, mind you. I pretty much ignored it, before buying the phone. But for this phone, QC 2.0 actually does a good job to compensate for the mediocre battery. I can run the battery down to 40-50%, put it on QC 2.0 charger in my car for my 30 minute commute, and it is charged to around 80+% when I arrive at my destination. There are a lot of QC 2.0 certified aftermarket chargers out there too, Qualcomm did a lot of work on the front end as part of bringing it to market. (Just make sure any AC charger is UL listed or equivalent, if you care about safety.
Caveats on cables: The cable does make a difference at higher charge rates. Thinner gage wire will impose a greater voltage drop at higher current, this will reduce power and thus increase charge time.
Typical USB cables are AWG 26-28. You can buy 20, 22, and 24 AWG USB cables. Some cables advertise heavier (22-24) gage wire for the power leads with standard (26-28) gage wire for the data leads. The aftermarket QC 2.0 AC chargers I bought listed their included cables as 20 gage.
Get the heavier gage if you want full QC 2.0 charging.
soufdallas said:
I still have my galaxy s6 nexus charger that is a fast charging and it seems to work fine with turbo charging
Sent from my LG-H345 using XDA Free mobile app
Click to expand...
Click to collapse
Just to check did you use S6 original charger ? And does it charge same with the turbo power charger provided by moto?
Sent from my Moto X Pure (2015) via Tapatalk