Hi,
my Defy+ was in the boot loop and I tried to flash it with RSDLite and an 2.3.6 image. I have never flashed my Defy+, it was the Stock Rom on it.
I get following message flashing the device:
Failed flashing process. Failed flashing process. Phone[0000]: Error verifying Code Group 31 checksums. File: 0x93C5, Phone: 0x5E8F (0x4007031); phone disconnected
Could you help me?
best wishes
Chuck93 said:
Hi,
my Defy+ was in the boot loop and I tried to flash it with RSDLite and an 2.3.6 image. I have never flashed my Defy+, it was the Stock Rom on it.
I get following message flashing the device:
Failed flashing process. Failed flashing process. Phone[0000]: Error verifying Code Group 31 checksums. File: 0x93C5, Phone: 0x5E8F (0x4007031); phone disconnected
Could you help me?
best wishes
Click to expand...
Click to collapse
Looks like your SBF is corrupted. FLash DFP-231 from here - http://forum.xda-developers.com/showthread.php?t=966537. You have Defy+ so all things will work...
Hi
i tried this image:
http://forum.xda-developers.com/showthread.php?t=1495099
mediafire and rapidshare = Blur_Version.45.0.2310.MB526.Retail.en.DE
But same error message:
Error verifying Code Group 33 checksums. File: 0xFC1B, Phone: 0x4805
I bought the Defy+ on Ebay, could it be, that it isn't a Defy+ and the seller gave me a Defy and changed the label (it is a MB526 label)
should the defy+ have a notification led? i couldn't see one
thanks for your help
Chuck93 said:
Hi
i tried this image:
http://forum.xda-developers.com/showthread.php?t=1495099
mediafire and rapidshare = Blur_Version.45.0.2310.MB526.Retail.en.DE
But same error message:
Error verifying Code Group 33 checksums. File: 0xFC1B, Phone: 0x4805
I bought the Defy+ on Ebay, could it be, that it isn't a Defy+ and the seller gave me a Defy and changed the label (it is a MB526 label)
should the defy+ have a notification led? i couldn't see one
thanks for your help
Click to expand...
Click to collapse
Flash a fixed sbf and go one.
hi
ok, where do i find the downloadlink?
should the fixed-sbf be in this thread?
http://forum.xda-developers.com/showthread.php?t=966537
Hi
how can I use a fixed-sbf. I've read, that the fixed-sbf is a nanroid, but I could not load a nandroid, because I have no recovery on it. Or are there somewhere sbf, and where?
thanks for your help
Sorry for being pessimistic, but if flashing an sbf fails with verification error and you're sure the sbf isn't corrupted, then it indicates hardware failure
Sent from my MB526 using xda premium
yes, I am sure that the sbf is not corrupted
this should be the right version for my defy+?
Blur_Version.45.0.2310.MB526.Retail.en.DE
any other suggestions?
is there a chance to get the device repaired, because the warranty is not expired jet.
Yes, that sbf is right, and it should be repaired under warranty, just don't tell them about rsd flashing make up some story
Sent from my MB526 using xda premium
if its still under warranty, don't even try to fix it mate!
one thing that works on motorola is theyr technical assist.
i've bricked an E398 couple of decades ago and was fixed under warranty, u just cant show anything about custom rom and stuff
Related
So, my defy had had Cm7 with android 2.3.7 installed. I don`t know what i did but i installed android 2.1 ( update 1 ) on it ( ) i know ... this is bad ).
Right now, i can`t install any android above 2.1.1 even though i read on the forum about simillar situations like mine.
This evening, something happened and my defy won`t boot up... enters into an continous loops and stays right there . Don`t know what to do ... i just want to install CM7 again ...
Any suggestions ? What should i do ...
If i try to flash android 2.2.1 or 2.2.2 the phone stops at the motorola red logo ... i can`t make hard reset ... nor wipe data/cache from the bootmenu ( the phone is restarting )...
I neeeeddd heeelpppp !
Oh ... and if i install this -http://forum.xda-developers.com/showthread.php?t=1093352 - or any other sbf it won`t boot
It works only with JORDN_U3_97.21.51
Keep the one work and start from there, full wipe and flash 2.2.2.
Can you give me a link with that 2.2.2 that you suggest I should install? Please
You can use stock froyo ROMS from: forum.xda-developers.com/wiki/index.php?title=Motorola_Defy
won`t boot up ... only with JORDN_U3_97.21.51 is booting up ). so , i downgraded from 2.3.7 to 2.1 update 1. what to do nowwww ?
I had a similar problem with my Defy. I solved the problem by flashing the Gingerbread ROM 2.3.4/4.5.1-134 as nandroid backup + fixed sbf. After that i flashed the Froyo (o2) sbf back and finally got it booted up.
yep ... i finally solved it. if anyone have the same problem as me -> http://forum.xda-developers.com/showpost.php?p=15341774&postcount=8
This happened to you because JORDN_U3_97.21.51 is 2.1 eclair with CG39.smg and CG31.smg version 5. Once you flash a version 5 CG set you are stuck on version 5. This is the same CG version as the leaked 2.3.4 sbf's. The ONLY sbf's you can flash from now on are JORDN_U3_97.21.51 and the full 2.3.4 sbf's. To switch to any other rom you will need to restore THAT roms nandroid, and then create a fixed sbf from THAT rom by depacking THAT sbf and deleting CG39.smg and replace CG31.smg with CG31.smg from 2.3.4 sbf. Repack it and flash this fixed sbf.
I know its obviously too late but for anyone reading this who wants to downgrade from a froyo sbf to an eclair sbf can flash US Tmobile eclair 2.1 sbf found here http://sbf.droid-developers.org/umt...1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf.gz This eclair sbf shares CG version=4 just like froyo sbf's. I'm not sure if any other eclair sbf's contain CG=4 as I'm only familiar with US Tmobile eclair sbf. But I believe all other eclair sbf's have CG=3
ok, so i have a defy i rooted it and tried to change boot logo and i misplaced the file and it wouldnt turn on or boot.
so i plug it into my pc and it is recognised by rsd lite and a white led shows up on my defy.
i go to flash a rom and it doesnt work.
it turns the little green picture red and then fails.
Any chance of me being able to actually getting it to work.
i have resarched loads of ways and nothing seems to help, hence why i posted here. thankyou
ROM (in a zip file) or SBF file? RSD Lite will only accept SBF files!
If you are using a SBF file, is the CG version greater than or equal to what you had before? For example you can't flash a Froyo SBF after flashing Gingerbread.
i used the .SBF
i was on froyo trying to flas another version of it, so i need flash a gingerbread rom?
can anyone else give me a hand?
Does it have clock work mod recovery installed
no it doesn't, im guessing its screwed?
no your not, just flash the stock froyo image (.sbf file) with rsd lite and then erase data trough stock recovery and it should start normally
ps: i used this one
http://forum.xda-developers.com/showpost.php?p=14564962&postcount=13
hope it helps.
cheers
if this works your a baws
Install official Indian Froyo 2.2.2 from http://www.mirrorcreator.com/files/HRXSSAXE/ using RSDLite if you have not installed any new version of 2.3 GB
popcorn1122 said:
Install official Indian Froyo 2.2.2 from http://www.mirrorcreator.com/files/HRXSSAXE/ using RSDLite if you have not installed any new version of 2.3 GB
Click to expand...
Click to collapse
muhahahahaha
Hey guys, i flashed several .sbf to my defy through RSD like .sbf of defy+ and uk 2.3.5 but none of them worked for me.
And now my defy is not booting even with the original .sbf that is 2.2
Please help......................
I love my defy..http://media.xda-developers.com/images/icons/icon9.gif
if you have installed new version of FULL sbf which is not downgradable then u r stuck...
check this URL for more to some how revert back ...
http://forum.xda-developers.com/wiki/Motorola_Defy
please be more appropriate please........... tell me how do i get my defy in normal mode....
what should i do?????/
please guys help me..........................
neerajbisht1988 said:
please guys help me..........................
Click to expand...
Click to collapse
If all depends on the kind of SBF that you flashed. If you have flashed a FULL sbf then you can't downgrade most likely. If you flashed a FIXED sbf then downgrading shouldn't be a problem.
I made the same mistake in the beginning but luckily I only flashed a FULL 2.2 sbf which is stable. For now I always start from this rom, get root on my phone using superoneclick, install 2ndinit, reboot into 2ndinit recovery (volume down when led turns blue) and I install the nandroid backup that I placed on My SD card using "install from zip".
It would help if you gave some more info on which sbf you flashed?
RSDLITE(WINXP)->sfb 2.2.2
Sent from my MB525 using XDA App
Links
have similar problem ...
cant paste external links yet so if u wanna try what i did PM me
Hi I have a Defy+ BL7 which I successfully rooted using the only method
http://forum.xda-developers.com/showthread.php?t=1542956
I'm trying to put on Quarx's CM10 4.1.2 which requires Snd-boot. Now when I go to custom bootmenu go to Boot > 2nd-boot.. The phone powers down a lttle, the screen goes off then Rom starts loading, so I never get to the point where I can choose the zip files. Is this because I have a boot loader 7 version or is there some other reason. Is there any alternative, I know the slightly older versions of this Defy+ rom are not snd-boot and you can install them as zips from the custom recovery menu instead, how would you update to the latest ?
I would like to resolve the problem with snd-boot first though
What do you experts say on the matter?
Thanks
You have flashed the CN version when you rooted or the CEE version?
Because of you have flashed the CN version the 2nd boot will not work. You must flash the CEE version of the rooted sbf. Then install 2nd init. Then the 2nd boot rom.
Happy flash
Sent from my MB526 using xda app-developers app
Double checked
Hi, thanks for getting back so soon. I just double checked that the only files I downloaded and flashed were
All flashing done with RSDLite
First flash
DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_
Service1FF.sbf.gz
194.9 MiB
SHA256 dbceb1229ff625880184199a80ff5ec892536faa3789742c5b955cdd009eb717
============================================================
Second flash
DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.rar
181.3 MiB
SHA256 eea1d43d16d2bdf0497f41ebc12daf0141a4718a87b2f26a76bf8ba616ffe81b
Contents of file above when uncompressed (I did this manually first with WinRAR before flashing)
15 files, size together 757,190,543 Bytes. All having the "defyplus_u3_4.5.1-134_dfp-231_cee_rooted_no_signed" designation at the start of their filename.
Thanks
Version Information
Just to give you more detail, here is the original spec of the unrooted phone
sys version : 45.0.2310.MB526.Retail.en.GB
model number : MB526
ANDROID VERSION 2.3.6
BASEBAND : EPU93_U_00.60.03
KERNEL VERSION : [email protected] #1
build number : 4.5.1-134_DFP-231
I recovered from Bootloader 09.10 Err:A5,70,39,00,27
I flashed JORDN_U3_97.21.51 SBF and recobvered.
Now I'm on
Model MB525
Firmware 2.1-update 1
System version, Blur_version.0.0.1.MB525-nightly.T-Mobile.en.US
But now I cannot Flash anything on my phone adn upgrade..
Can anyone of u please please guide me to upgrade to any of the custom ROM...
I rooted and when I try to flash, on restart the phone hangs at Moto start symbol..
It would be greatly appreciated if you could reply..
Thanks a dozen!