[Tutorial] Fix FOTA bricked (unlocked bootloader) Phones
Hi,
This will fix your unlocked Phones which got bricked through OTA update and are dead now!
Please download this package:
Let it extract to a destination of your choice.
After that run Flashtool.exe.
Now hit the button FLASH and select the package which is included.
Follow the steps and connect your phone in flashmode. This is the same mode Pc Companion and SEUS uses to flash your phone to newer firmare (Indicated by green LED), if you got BLUE LED you are in the wrong mode!
Flashtool will now detect your phone and start the repair.
After all is done your phone should be up and running again.
ADVICE:
PLEASE DO NOT ACCEPT ANY OTA'S ! If you receive a OTA message just decline, if you accept it you will end with a brick AGAIN! So please do NOT accept them until SonyEricsson provides a OTA solution for unlocked Bootloaders!
Best Regards
Team FreeXperia"
Hi,
I cant access megaupload to download file keeps downloading a download manager and not the file, is there any chance somebody could upload this file to another download site
Thanks
R
Related
I want to update the firmware
Therefore, i get into bootloader but i cant access the recovery mode
I have try several ways,like 'adb reboot recovery' , use manual update 'copy the firmware.zip into my SD card', or just unroot the device and try again the step i had done but it didn't really help
The result, my device won't update. . .the notification 'bout 'ASUS Software update' keep showing up til' now
Thank you. . .
Hi, what firmware are you on right now? Why don't you just update through OTA update?
Hello everyone.
I rooted my phone (os was marshmallow) with android lollipop procedure, so i soft bricked the phone.
I flashed with fastboot various versions of huawei p8 lite firmware, all of these were 5.0.1.
When I managed to unbrick my phone I found out that it can't read the sim, so I looked in settings and IMEI and BASEBAND were disappeared.
Probably direct downgrade from marshmallow to lollipop caused this.
By the way, I managed to solve all my problems.
I will write what I've done here. I hope will be helpful. To start: my model is ALE-L21 (Single Sim).
- Download B041c (if you search in google you will find various results, all taking to the same site). I'll explain this better after *
- Flash with fastboot B041c
- Download B133 (this is very easy to find, but if you have problems search in a site called carbontesla)
- Unpack B133 dload folder (you will find custom folder too, don't worry about it) and put dload folder in the root of your sdcard
- Go to Settings -> Updater -> Local Update and start B133 update. Phone will boot. The upgrade process should be done with phone chargend and unplugged from PC.
- At some points update could appear stucked (for me was at 15% and 85%) but be hopeful and it will continue (let be patient).
- Phone will boot and your sim after 4-5 seconds will work again!
* B041c is hard to find. At this time only one site have it. I can't link you this site, because the downloader you get from this site installs adware on your pc while it download B041c. I have had to solve my problem so I proceded at my own risk.
Updater will notify you about the update to B183. It doesn't worked to me! If you want to update your phone you can install firmware B171 and install it as update (in dload folder)
UPDATE TO MARSHMALLOW
- If you want to update your phone to marshmallow you have to download other two firmwares (B171 and the MM you want. I used B551)
- Put the dload folder of B171 in your sd card, turn off your phone and force flash (VOLUP + VOLDOWN + POWER buttons). It may appear stucked at 19% and 85%. Don't worry, be patient!
- When phone boot is completed, put dload folder of your MM firmware in your sdcard, turn off the phone and force upgrade (VOLUP + VOLDOWN + POWER buttons). It will take 15-20 minutes.
- When installation is completed and phone boots, turn it off again, enter in recovery mode (VOL UP + POWER button) and clear data and cache.
- Now you have a clean install of MM! However, some applications may be old (play store). If you have connected our phone to a network, play store will update automatically
SOLVE BALONG BUG
You can find easliy the solution in the forum. But to be a complete guide and make your life a lot way easier here is the solution.
Simply put UPDATE.APP of custom folder that you can find in some firmware (I used B049 custom folder) in your sd card and then update from settings or from force update. Is a 20KB file so it will be very fast to install
The only thing I can successfully do with odin is flash the bootloader. I have the full firmware file, but whenever I try flashing anything but the bootloader, FRP Lock blocks it or it fails in odin. I know the exact reason that the phone is bricked, my OEM Unlock setting in developer settings got turned off and I have a rooted binary, so now whenever it trys to boot up, a little red message shows up in the top left for the first few seconds of boot, then the phone shuts off completely. No other thread provides any solution for my situation. Odin wont flash any firmware and I cant get into TWRP anymore as well. Does anyone know what to do? I have a replacement coming from T Mobile in a few weeks but I want to try and fix this thing.
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
what and where to find scatter file?
Farzad37 said:
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
Click to expand...
Click to collapse
I think this is very helpful to my situation.....but what is a scatter file as oppossed to the stock firmware....and is it something I can extract or get from the stockfirmware.zip? I have a samsung On5 (sm-g550t) thats bricked...thanks in advance!
Farzad37 said:
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
Click to expand...
Click to collapse
That's for mtk devices only, and will probably brick op's device even more
Retry Kies.
In the back of phone under battery look for make name (Sould look like SM-G5xxxx) and S/N
Make copy on windows txt file
Boot phone into Download Mode but dont plug into usb yet.
Open Kies on Windows select tools, then firmware upgrade and initialization. Enter your make click ok then enter your S/N click ok. Plug phone into usb and keep clicking ok untill you see downloading firmware
●BRIEF INTRODUCTION :-
•Here Is All In One Guide For Various Flashing Processes For Samsung Galaxy Devices Using Windows PC
•Official Stock Firmware flashing Including Upgrading And Downgrading Firmwares Using Samsung Odin
Note :-
*Downgrading Of Stock Firmware Is Neither Officially Supported By Samsung Nor By Xda Community.
*Do It At Your Own Risk.
•Emergency Software Recovery Using Samsung SmartSwtich
•TWRP-Custom Recovery Flashing Using Samsung Odin
•CF-Autoroot-Root Tool Flashing Using Samsung Odin
●WHO SHOULD USE THE GUIDES :-
•Users Who Want To Manually Upgrade Their firmware to Higher Android Version OR Users Who want to Manually Downgrade Their firmware to Lower Android Version
•Users Who are facing Various DM-Verity/SW-Check Fail/Custom Binary Blocked by FRP/Bootloops Due to Flashing Wrong Custom Roms Or Mods Or Fixes etc. Hence Unfortunately Have to Flash Stock Official Firmware
•Users Who want to Install TWRP-Custom-Recovery
•Users Who want to Root their devices using CF-Autoroot-Root Tool
●REQUIREMENTS :-
•Samsung Device with OEM Unlocking And USB
Debugging Options Enabled from Developers Options
Note :-
To enable Developers Option Follow The Steps Below
*Go to Settings/About Device
*Press On Build Number For 6-7 Times until you see Developers Options Enabled Popup
*You will be able see Developers Options In Settings
*Go To Settings/ Find Developers Options Mostly At The End
•Device Should Be Charged upto 60-70% as Flashing Process May Sometimes Lengthens according to various Devices/Firmware Sizes As Well As Internet Connection Speed in case of SmartSwitch As It Uses Data For Downloading/Updating Firmwares Online
•Original Samsung OEM Usb Cable As Other Cables Would sometimes Give Device Not Recognized or Flashing Interrupted or Flashing Stuck At Certain Points like Errors
•Windows PC With Samsung Usb Drivers Installed According To your Device Model Number
LINK For Samsung Usb Drivers Download:-
https://androidmtk.com/download-samsung-usb-drivers
•Latest Samsung's Odin Tool For Windows PC
Note :-
*Extract Odin.rar Or Odin.zip to Specific Folder to get Odin.exe File
LINK For Samsung Odin Download:-
http://www.droidviews.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
• Samsung's Official SmartSwitch Tool For Windows PC
LINK For Samsung SmartSwitch Download:-
http://samsungsmartswitch.org/
Note :-
*If You want to use Odin Then install Odin Only on PC Or If You want to use SmartSwitch then install SmartSwitch Only On PC
*Simultaneous Appearance of Both Tools On PC will Sometimes May probably give Error while Flashing Firmwares through Odin
•Samsung Stock Official Firmware for Your Device Model Number/Country/CSC
LINKS For Samsung Official Stock Firmware Download:-
1)https://www.sammobile.com/firmwares/
2)http://samsung-updates.com/device/
3)http://updato.com/firmware-archive-select-model
4)https://androidmtk.com/download-samsung-stock-rom
Note :-
*The Downloaded Firmware should be Latest According to availability for Your Country
Since Some Courtiers Got Official 7.0 Nougat While Some Are Still Stucked At 6.0.1 Marshmallow Yet
*As well As Firmware should be accurate for Your Device Model Number/Country/CSC to avoid Further Flashing Errors Through Odin
•Trick of booting your Samsung Device into Download Mode using Hardware Key Configuration
Note :-
Follow Below Steps To Boot Your Device Into Download Mode
*Power Off your device
*Press Volume Down+Home+Power Buttons Simultaneously Untill You See Download Mode Window
*Press Volume Up Key To Continue To Download Mode
●CAUTION :-
No One Here Within XDA Community Including Me Will Ever Be Responsible For Bricked Devices
So Kindly Try Any Of Following Guide At Your Own Risk
●SAMSUNG ODIN FLASHING GUIDE TO FLASH STOCK OFFICIAL FIRMWARES ON SAMSUNG DEVICES FOR COMPLETE STOCK/UNROOTED EXPERIENCE
●IMPORTANT NOTE :-
This Guide Can Be Used For Both Upgrading And Downgrading Of Stock Official Firmwares
Only Precaution Should Be Taken Is That In Case Of Upgrading Firmware Kindly Choose Latest Dated Higher Version Of Android OS While In Case Of Downgrading Firmware Kindly Choose Latest Dated Lower Version Android OS Available For Your Device/Country/CSC
●INSTRUCTIONS :-
•As Per Requirements I assume You have
*Enabled OEM Unlocking And USB Debugging Options From Developers Options
*Downloaded/Installed Latest Samsung Usb Drivers For Your Device on PC
*Downloaded/Extracted/Installed Samsung Odin On Your PC
*Downloaded/Extracted Latest Official Stock Firmware For Your Model Number/Country/CSC
•Run Odin.exe as Administrator
•You Will See Odin Window with Various TABS like BL/AP/CP/CSC/UMS As Well As Certain Odin Options like Auto Reboot/F-Reset Time/Re-Partion/PIT File Add etc.
•Extract the Downloaded Stock Official Firmware in Specific Folder And You will get ***.tar.md5 like file of Stock Firmware in Specific Extracted Folder
•Add the Extracted ***.tar.md5 Firmware File in AP TAB of Odin
Note :-
*It will take Some Time to Add Firmware file into Odin According To Firmware Size
*So Keep Some Patience And Let Odin Ready For Flashing Process
•Be sure in Odin Options Only Auto-Reboot/F-Reset Time options are Ticked
•DON'T SELECT Re-Partion Or PIT File Add Options Unless Your Facing Null/Generic IMEI Or Baseband Unknown Related issues only
Note :-
*You Will Need to Download PIT files for Your Specific Device Model Numbers For Re-Partion of Partion Table In Case Of Null/Generic IMEI Or Baseband Unknown Issues
•Boot Your device into Download Mode Connect To PC using Original OEM Samsung Usb Cable Into Main Usb Port Of PC
Note :-
*Secondary Usb Hubs Sometimes May Produces error Of Device Not Recognized etc.
•Allow PC to install Samsung Usb Drivers for your Device
•You can see Your Device is added in Odin as its Highlighted in ID:COM Section on Left corner of Odin Windows
•Now your ready to flash Stock Firmware
Note :-
*ID:COM Will Look Like for eg. IDORT21 Etc.
•Press on Start Button in Odin, It will automatically start flashing process And You can see flashing log in Odin Side Window
•It will take some time to flash Stock firmware according to Device/Odin version/Firmware Size So Keep Some Patience And Stay Relax
•After flashing process gets complete, You will see "Pass" Message at the top of Odin Window
•Your Device will Reboot automatically
•Disconnect Your Device from PC
•Wait untill Software Updating/Installing Process Gets Completes on Device
•Afterwards Your device will Booup normally to Initial Setup Wizzard
•If In Case Your Device gets Stuck at Samsung Galaxy Logo For Long Time More than 10-20 minutes
Don't Worry Your Device Is in Soft BootLoop And There Is A Solution to fix it
Note :-
To Get Out Of Bootloop Follow The Steps Below
*Press Volume Down+Power Button Untill Screen gets Turned Off to Power Off Your Device
*Quickly Press Volume Up+Power+Home Buttons Simultaneously untill You See Samsung Galaxy Logo
*Release Keys Now
*You will Get Into Stock Recovery
*Select Wipe Data/Factory Reset Option There
*Wait Until Wiping Process get Completes
*After Wiping Process Get Completes Reboot your Device
*This time Your Device should BootUp normally without any issues
●SAMSUNG SMARTSWITCH GUIDE FOR EMERGENCY SOFTWARE RECOVERY ON SAMSUNG DEVICES
●INSTRUCTIONS :-
•Open Samsung SmartSwitch You have installed On Your PC
•You will see SmartSwitch Window
•Click On the More Option at the top Right Corner in SmartSwitch Window
•Select Emergency Software Recovery And Initialization Option From Menu
•You will See Emergency Software Recovery And Initialization Window
•Select Device Initialization Option
•You will be Asked to Enter Your Device Model Number
Note :-
*Device Model Number Should Be Like For Eg. SM-N920C/I/G/F
•In Next Step It will ask You to Enter Device Serial Number Which You Can Find Printed On OEM Original Box Or On the Back Panel Of Device Or In Settings> About Device> Status> Serial Number
Note :-
*Device Serial Number Should Like For Eg. RZ8G*****
•Click Ok For Approval Whenever It Will Be Asked Until You See Some Instructions Window in SmartSwitch
Note :-
*Instructions Should Look Like "Make Sure Your Device Is Turned Off/Put Your Device Into Recovery Mode i.e.Download Mode" Etc.
•Put Your Device into Download Mode As per Instructed Into 'REQUIREMENTS' Section Using Hardware Keys Configuration
•Connect Your Device to PC using Original OEM Samsung Usb Cable To PC
•Click On "OK" Button In Instructions Windows
•SmartSwitch Will Automatically Detect/Download/Install Latest Available Stock Official Firmware for Your Device
•Wait And Keep Patience Untill Whole Process is Being Completed
•Your Device will Reboot Automatically After Installation Process Completes Successfully
•If In Case Your Device Stuck at Samsung Galaxy Logo For Long Time More than 10-20 minutes Then Don't Worry Your Device Is in Soft Bootloop AND There is A Way to fix it
Note :-
To Get Out Of Bootloop Follow The Steps Below
*Press Volume Down+Power Button Untill Screen gets Turned Off to Turn Off Your Device
*Quickly Press Volume Up+Power+Home Buttons Simultaneously Untill You See Samsung Galaxy Logo
*Release Keys Now
*You will Get Into Stock Recovery
*Select Wipe Data/Factory Reset Option There
*Wait Until Wiping Process Get Completes
*After Wiping Process Get Completes Reboot Your Device
*This Time Your Device Should Bootup Normally Without Any Issues
●TWRP-CUSTOM-RECOVERY FLASHING GUIDE USING ODIN ON SAMSUNG DEVICES
●INSTRUCTIONS :-
•First Step is to Download Latest TWRP-Custom-Recovery For Your Specific Device Model Number
•You Can Grab Latest Version Of TWRP-Custom-Recovery From Official TWRP Website Below Posted
Note :-
*Select And Download Latest twrp***.img.tar File for Your Device Model Number Correctly
Official Website For TWRP-Custom Recovery Download:-
https://twrp.me/Devices/
•Open Odin On PC As Administrator And Add twrp***.img.tar into AP TAB of Odin
Note :-
*In case If You have downloaded twrp***.zip Then
Extract it to Specific Folder to get twrp***.img.tar file
•In Odin Options Be Sure To Un-Tick Auto-Reboot Option Also Don't Select Re-Partion Option
So Make Sure You Have Only Ticked F-Reset Time Option In Odin Options
Note :-
*If You Tick Auto-Reboot Option Then You will Get into Stock Recovery Again Even After flashing TWRP Using Odin
*So Better to Un-Tick Auto-Reboot Option And Manually Boot Into TWRP-Custom Recovery After Flashing Successfully By Hardware Keys Configuration
•Boot Your Device Into Download Mode And Connect To PC Using Original OEM Samsung Usb Cable
•You will See Your Device Is Added And Highlighted In ID:COM Port
•Click On "Start" Button In Odin And Wait Untill Odin will Flash TWRP-Custom-Recovery
After Flashing Completes Successfully You will See "Pass" Message In Odin
•Disconnect Your Device From PC Even if Its in Download Mode
•You Have To Boot Your Device Into TWRP-Custom-Recovery Manually By Using Hardware Keys Configuration
Note :-
To Get Into TWRP-Custom-Recovery Manually Follow The Steps Below
*Press Volume Down+Power Button To Turn Off Device
*Immediately Press Volume Up+Power+Home Buttons simultaneously After Device Screen Gets Turned Off
*You Will See Samsung Galaxy Logo
*Release Keys Now
•Your now in TWRP Recovery And Ready To Flash
*Custom Roms/Mods/Fixes
*Systemless SuperSU/Magisk Root Zips
Note :-
*If Your Planning To Flash Any Custom Roms/Mods/Fixes Or Systemless SuperSu/Magisk Root Zips Files Using TWRP
*Then Make Sure You Have Downloaded Those Files And Saved Them Already Into Your Internal Storage/External SD-Card Before Flashing TWRP-Custom-Recovery
●CF-AUTOROOT- ROOT TOOL FLASHING GUIDE USING ODIN ON SAMSUNG DEVICES
●INSTRUCTIONS :-
•First Step Is To Download Official CF-Autoroot-Root Tool For Your Device Model Number According To Android Version And Build Number
•You Can Download Official CF-Autoroot-Root Tool for Your Device Model Number And Android Version From Official Website Listed Below
Official Website For CF-Autoroot-Root Tool Download:-
https://autoroot.chainfire.eu/
•Extract CF-Autoroot.Zip in Specific Folder to get CF-Autoroot.tar file to be Flashed Using Odin
•Open Odin On PC As Administrator And Add CF-Autoroot.tar into AP TAB of Odin
•Make Sure To Tick Only Auto-Reboot And F-Reset Time Options In Odin Options
Dont Tick Re-Partion Option In Odin Options
•Put Your Device Into Download Mode And Connect To PC Using Original OEM Samsung Usb Cable
•You Will Eee Your Device Is Added And Highlighted In
ID:COM Port
•Click On "Start" Button In Odin
Wait Untill Odin will flash CF-Autoroot
You See "Pass" Message In Odin After Successful Flashing
•Your Device Will Reboot Automatically After Flashing Completes
Disconnect It From PC
You Wipl See On Device Screen That CF-Autoroot is Rooting Your Device
Note :-
*You Will See Some Red Command And Process Logs On Your Device Screen While CF-Autoroot Is Rooting Your Device
•Keep Patience untill Rooting process completes
Don't Turn Off Device while Process is going on Even if it will lead to some BootLoops
Your device will Reboot Automatically after Rooting Process completes.
•You Will See SuperSU Wpp In Default App-Drawer After Your Device Bootup
Could you tell me even though i took ota update to naugat, if i could downgrade back to marshmallow by flashing throught odin?, and if i do what could happen if anything?
desmond462 said:
Could you tell me even though i took ota update to naugat, if i could downgrade back to marshmallow by flashing throught odin?, and if i do what could happen if anything?
Click to expand...
Click to collapse
1)To be say honestly downgrading is not officially supported by Samsung also But yes you can successfully downgrade to 6.0.1 from 7.0 (I personally downgraded to 6.0.1 once successfully due to issues on stock 7.0)
2)You only need to follow the guide as instructed carefully Also the version of 6.0.1 MM you will choose to downgrade to should be latest dated (I mean the latest 6.0.1 firmware for your device and country available on Sammobile.com casually)
3)Hence you can find some instructions within my own Post in which i mentioned step by step installations instructions (Go To Page No 65 And Find My Post In Reply To Okiera29 There Regarding Downgrading To MM From Nougat)
https://forum.xda-developers.com/note5/help/help-thread-question-noob-friendly-t3220229/page65
DayDreamer said:
1)To be say honestly downgrading is not officially supported by Samsung also But yes you can successfully downgrade to 6.0.1 from 7.0 (I personally downgraded to 6.0.1 once successfully due to issues on stock 7.0)
2)You only need to follow the guide as instructed carefully Also the version of 6.0.1 MM you will choose to downgrade to should be latest dated (I mean the latest 6.0.1 firmware for your device and country available on Sammobile.com casually)
3)Hence you can find some instructions within my own Post in which i mentioned step by step installations instructions (Go To Page No 65 And Find My Post In Reply To Okiera29 There Regarding Downgrading To MM From Nougat)
https://forum.xda-developers.com/note5/help/help-thread-question-noob-friendly-t3220229/page65
Click to expand...
Click to collapse
Ok thank you for your reply, I understand. I also had some trouble with drk verity fail issue when I factory reset because I run into issue with my efs, it was failing to boot ,but after searching the internet I found out how to fix the efs issue and then I flash stock over and then run into trouble with drk verity fail issue, but found a script to bypass this error ,but I read that whenever I flash or factory reset I will run into this drk verity fail issue again, so I must flash this script to bypass this error.
So my question after all i have explain is, will it be a problem to downgade to 6.0 because of those previous issues ?
desmond462 said:
Ok thank you for your reply, I understand. I also had some trouble with drk verity fail issue when I factory reset because I run into issue with my efs, it was failing to boot ,but after searching the internet I found out how to fix the efs issue and then I flash stock over and then run into trouble with drk verity fail issue, but found a script to bypass this error ,but I read that whenever I flash or factory reset I will run into this drk verity fail issue again, so I must flash this script to bypass this error.
So my question after all i have explain is, will it be a problem to downgade to 6.0 because of those previous issues ?
Click to expand...
Click to collapse
1)Can't say exactly without trying or downgrading firmware as i said already neither samsung nor any community will officially support downgrading of firmware as it may cause various baseband and imei related issues due to downgrading of bootloader
2)But for safety you can take full Nandroid backup of your current stable rom using TWRP and Try to downgrade firmware at your own risk
Regards
DayDreamer said:
1)Can't say exactly without trying or downgrading firmware as i said already neither samsung nor any community will officially support downgrading of firmware as it may cause various baseband and imei related issues due to downgrading of bootloader
2)But for safety you can take full Nandroid backup of your current stable rom using TWRP and Try to downgrade firmware at your own risk
Regards
Click to expand...
Click to collapse
ok thank you. So i end up downgrading back to marshmallow and i did run into the issue with drk and i flash the script to bypass that error and boot up successfully, but at the moment am searching for a fix to the drk failing on the internet, i found that alot of persons have run into this problem, but i see wat i can find.
desmond462 said:
ok thank you. So i end up downgrading back to marshmallow and i did run into the issue with drk and i flash the script to bypass that error and boot up successfully, but at the moment am searching for a fix to the drk failing on the internet, i found that alot of persons have run into this problem, but i see wat i can find.
Click to expand...
Click to collapse
You can find more information in below listed thread about DM-verity with DRK check
https://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306
Gr3atGeek said:
•You will See Emergency Software Recovery And Initialization Window
•Select Device Initialization Option
Click to expand...
Click to collapse
What version of Smart Switch offers initialization for SM-N920C Note 5's? The latest version doesn't include initialization anymore at all, and an older version I tried stated that initialization was not supported for Note 5's.
All right, I'll see what i do.
Thank you very much.
Urgent help needed as I'm leaving the country at the end of the week o any help is appreciated!
Just successfully rooted my device:
Black, Unlocked, PRA-LX1, UK, Dual SIM
After doing so successfully, I attempted to flash LineageOS from the following link:
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-lineageos-15-1-hi6250-devices-t3811583
Although when I completed Step 6 on the Installation guide and rebooted the phone, I started seeing the message:
------------------
ERROR MODE
Attention!
Please update system again
(Green Android picture)
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
------------------
Despite this, I didn't receive a box with my phone due to being second hand, and I didn't see the model number on the receipt as it was from a reselling store. I didn't remember to note down the specific model number
It'd be extremely helpful if someone could possibly help just from the device description above as I'm not sure if it's safe for me to just attempt to flash every stock rom for every other LX1 device out there.
---------------------------------------------------------------
Update:
To restore this, I connected via fastboot with a working USB & flashed an original stock recovery in the video found here
(Just in case their download link ever goes down, I have uploaded the same copy to my MEGA, found here)
The recovery installed fine when using the command
fastboot flash recovery oeminfo.img
Click to expand...
Click to collapse
Whenever trying to flash any other recovery such as twrp before this fastboot stuck on a loading icon.
The stock recovery seems to be downloading the original firmware, too.
PRA-LX1C432B202 is presumably the model.
Both the bootloader and FRA were unlocked when everything else was inaccessible.
Looks like the custom ROM's recovery that you've flashed is not compatible with PRA-LX1. Try to flash stock recovery. If not working, then flash stock firmware.
Thanks @Botar230!
I didn't see your comment until just now after deciding to edit this post since I've gotten a step closer to restoring my device.
Your solution was the method I used although I didn't know my phone model, so I found a random solution which just worked for my device, and the eRecovery seems to be downloading the stock firmware anyways. Thanks again
Before flashing this lineage os you should update to EMUI8 to get treble support, i suppose you was running EMUI5, hence the error mode.