invert and cloudy image on all camera apps. DEFY MB525 red lens
have a problem on any firmware
I must have tried EVERYTHING, what i found on this forum. no result
to edit build.prop, to change app and overlay.omap3.so, any mods , any fixes. no result.
but camera was workable when i bought body. problem in software.
need assist.
now i have body with label MB525 and red BUYER camera
about phone : is writing
model number MB526
Android ver 4.1.2
kernel 2.6.32.60-Jellybean [email protected]#1 10 Jun 2013
CM mod ver10-20130110 - Nightly-mb526
build number cm_mb526-userdebug4.1.2 JZ054K...
Related
Walter update the MS2Giner 5.0.In update log.
- supports Bayer and SOC cam
- Camera will work on SOC and Bayer camera (green* and red)
- better camera support for bayer camera
- new 720p record* and play (Milestone 2 - Android 2.3.6 files) *only bayer cam
- 720p record in m4v (h264 can be enabled via build.prop)
can someone ask me what mean as SCO and Bayer cam（I cant found it）
Sent from my ME525~Chinese 2.3.6
anyone here?
Sent from my ME525~Chinese 2.3.6
Thanks @casouzaj .
SOC mean green lens.Bayer mean red lens
Sent from my ME525~Chinese 2.3.6
Whenever I attempt to reboot my phone or it dies, I cannot turn it back on. The phone just sits at the Samsung Logo screen I and I am forced to do a complete wipe of my data, apps, pictures, everything. I'm not sure where the issue lies and I will be more than happy to provide as much information that I feel will be helpful to the situation.
About Phone
(Can't post picture because of gay ass anti spam...)
Android Version - 4.3.1
Baseband Version - 1337UCUAMDB
Kernel Version - 3.4.0-cyanogenmod-g93df44d [email protected] #1 Tue Jan 28 10:05:32 CET 2014
PAC Version - 4.3.Build-1 (Nightly Release)
AOKP Version - jflteatt_jb-mr2
CyanogenMod Version - 10.2-20140128-UNOFFICIAL-jflteatt
ParanoidAndroid Version - 3.99-RC2
Build Number - pac_jflteatt-userdebug 4.3.1 JLS36I eng..20140128.092751 test-keys
I think it may be something wrong with my kernel but I'm not sure. Also I couldn't find anything that related to my issue. All I could find was stuff in regards to soft bricks/bricks.
Hold power+ volume down.
Select cancel.
Does that work?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
You might want to consider flashing back to stock in Odin and starting everything all over. If you do that make sure you know what files to freeze/delete so you don't get any updates. You're phone will want to update to the latest firmware. Sounds like you may have to do this.
But first I would do a full wipe and flash a custom rom, one you know is stable. See if you still have the issues
Sent from my SAMSUNG-SGH-I727
Hi guys,
I have the latest OMNI ROM and I cant find the splitview feature.
Anyone can help me?
There's some settings to do, or, just go to all apps that are already running, long press and the option should appear?
You have to have a special build of omni because split view is not yet merged into the default branch.
Sent from my Nexus 4, want to know my current project? Check http://team-fun.eu
My BUILD number:
omni_mako-userdebug 4.4.2 KVT49L 244 test-keys
Please help!
I would like an assessment of whether the S5, which suffers from the average user of these errors:
Please fill out the attached table to assist with this (optional)
A Hungarian board also started the survey.
I would ask that the teaser and other abusive comments mellőzétek not fit here! Thank you!
The necessary information
XDA username
phone build time
made in
mm-qcamera-daemon issue(Yes or No)
camera failed(Yes or No)
Android OS ver and Build ver last 4 character( BNL9 5.0 or ANG6 4.4.2)
Hardware rev. / Main & Rear Cam FW ver( this version show with code: *#34971539# -> PHONE/CAM FW this shown small time)
Installed apps used camera(facebook,viber etc.)
Whose phone has to ask the errors in red mark where the letters entered the information.
Please add this table for necessary info, this table all people is editable!
Very Thanks your Help!
Hello.
I have a wierd problem with chinese 7'' android 4.4.4 on audi q5
Unit does not want to switch to reversing camera, got power, pink is connected with trigger and camera power but no picture on screen.
Is there any settings in interface what should be looked at ?
Unit is from aliexpress ( aliexpress.com/item/32860860673.html?spm=a2g0s.9042311.0.0.27424c4dyjlq7q&fbclid=IwAR01gX1XMlr31xOpv-kGvrCs3kCpnclZsrLynb9r9D_ItMrcymLPXgk2gnk )
(Add WWW , new user, cannot add links )
Everything else works good, if i switch reverse camera to front input and manually add power to camera and start DVR function, it shows good picture.
Model number:
rkpx3
android version
4.4.4
kernel version
3.0.36+
[email protected] #1584
Mon jun 26 17 45 39 cst 2017
Build number
rkpx3-eng 4.4.4 KTU84Q eng.work2.20170830 121722 test keys
MCUver
415175bLZH-Q5-1024L-180328(a1024_170325)
frameworkver
rkpx3.work2.20170830.121722
If more info needed let me know.
Thank you
Problem solved.
Must use 360' option in rearview camera section, under settings