Related
Hello all,
I think I may have bricked my nexus one. It is completely my fault for attempting things that I knew little about, so flame away But after the flaming, if anyone is willing to help I would be sooooo thankfull...
I successfully rooted my phone following the instructions on this page: (all links edited with a double asterisk as I don't believe I can post links)
h**p://theunlockr.com/2010/01/02/how-to-root-the-nexus-one/
Then successfully installed cyanogenmod (which is awesome!) following this page:
h**p://theunlockr.com/2010/01/08/how-to-load-a-custom-rom-on-the-nexus-one/
All was well, I even got the modaco desire rom up and running, and was happily switching back and forth using the recovery screen. I had nand backups for specific setups, etc.
Then I decided it would be good to know how to go back to stock, and found this page:
h**p://**w.androidspin.com/2010/05/06/guide-unrooting-your-nexus-one-its-like-it-never-happened-almost/
I followed the instructions to the letter (I think) except for erasing userdata (it said "failed: remote not allowed"). I thought that things would be ok, since I'd recently wiped, so I followed the page till the end.
The phone rebooted, and I got the original nexus boot animation - but it's in an endless loop! What's worse, it that now when I try to go to the bootloader or recovery mode, I get the exclamation triangle with the little android.
Is there any way through a command prompt (or other method) that I can fix this? I tried to re-flash the RA recovery image through the command prompt, but the response was, "waiting for device."
ANYTHING that anyone can suggest to help, I would be so thankful! I've been loving the nexus, and hate to think that I crippled it
Thanks in advance,
Randy
I doubt its bricked.
Noticed you didnt mention that fast boot doesnt work? (power button+trackball) try it.
Once you get to fastboot you can flash any ROM back. (fastboot flash **** commands from a command shell)
Did you ever perform a Nand Backup from Recovery?
It's not bricked, the only way to brick is to interrupt power when flashing a Radio image
Connect phone to PC. Open command prompt.
adb reboot recovery
Wipe, reflash.
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
nexus5894 said:
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
Click to expand...
Click to collapse
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Paul22000 said:
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Click to expand...
Click to collapse
............................
It worked!!!!!
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Randy Malkoski said:
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Click to expand...
Click to collapse
Glad to hear it. You learn the most by trial and error.
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
revonomics said:
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
Click to expand...
Click to collapse
Tell me what i need to download again and how to go about it...i really need my phone working again ((((
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Arun01 said:
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Motorola published the factory files for Xoom awhile back so if you still have fastboot, you can recover from it.
http://developer.motorola.com/produ...utm_source=supportforums&utm_term=unlockboard
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Stop using one click crap. If you don't know what you're then you should not be messing with your device.
Sent from my DROIDX using XDA App
I can. Just won't.
Arun01 said:
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Click to expand...
Click to collapse
Type oem unlock again and then flash the stock images...youll be good to go...also there are really good stickies in here that help..pleasedont forget to search before starting a new thread.
albundy2010 said:
I can. Just won't.
Click to expand...
Click to collapse
And this is rude and uncalled for
The OP stated he read quides etc and none of it made sense to him etc. So instead of asking for help a explanation he tries a one click method. Which is stupid. He than softbricks the device and asked for help here.
Then he is told that moto released the factory images and use fastboot if he still has it to recover the device. He then decides to ignore that entirely and go back and try to unroot/restore with the one click BS again. Then he tries to use it again to go back to where he was. Just flat out stupid. He did something when he had no idea wtf he was doing. Was told what to do. Did not do it. He even said it is like Chinese to him.
So I told him to stop messing with one click crap. Which is correct. I told him to stop messing with the ****ing thing. Which is also correct. He needs to learn/understand wtf he is doing. Instead of basically button mashing/trying crap and hoping it will basically fix itself.
On top of that this posted in the wrong section. Uncalled for my ass. He is the one that was rude when told to not mess with the one click or the device. Now this part is rude. **** his stupid ass.
csseale said:
Type oem unlock again and then flash the stock images...youll be good to go...also there are really good stickies in here that help..pleasedont forget to search before starting a new thread.
Click to expand...
Click to collapse
How do i get to that ..and where do i type it at ..i looked in device manager & does recognize the xoom..it says "Motorola USB Device:Motorola Flash Interface"..In properties under "Driver" it has options for driver details..update driver..disable & uninstall.Can i do anything with them?
I tried opening SDK manager but it never lets me type anything in the box as it's always trying to do some kind of update in another window so when i close the window it closes all of the windows.
Sent from my DROIDX using XDA App
Arun01 said:
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
If they didnt make sense to you in the first place you probably shoud not be attempting to root... U went straight to an old method that even the developer has marked in hs thread can full brick you and should not be used. The xoom costs like 600 bucks... Why wouldnt you do extensive research on how to root? If you did not understand the terms why didn't you research the methods and learn it?
I hope you can flash the factory imagines back through fastboot and adb, but i just do not understand why people attempt this stuff when they have no idea what the terms even mean...
You need to have sdk, hook up to usb on your computer, and follow one of the unlock guides posted on this site... A real one using adb... Then you need to follow a root one...
Sorry that is not more helpful, but half of this experience is that you need to learn what you are doing and the instructions are out there. If they do not make sense at this point im afraid you are stuck. Now the way your device is you have to figure it out...
Arun01 said:
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Click to expand...
Click to collapse
Please check out this thread.It is called Root heaven for a reason. Just about every viable rooting guide, all the files and explanations you will need are here.
http://forum.xda-developers.com/showthread.php?t=1209341
I urge you to just calm down, read about what is the sdk, what is adb, how to recover from a soft brick and so on. The xda xoom forum is all about learning and teaching. We were all noobies once. The Xoom is a very complex device with many models and vesions and one clicks just don't cut it. There are rooting methods that are relatively simple but you really need to be prepared before you get started.
Good luck and don't despair. You'll get there.
Thanks for the help guys.I'm reading through all of the threads and i see a typo in a post that in the command window would've never let me find the sdk tools on my c drive. But after i retyped it i did it & a bunch of writing came up. Trying to figure out now how to flash the stock images to the xoom.
Sent from my DROIDX using XDA App
Arun01 said:
Thanks for the help guys.I'm reading through all of the threads and i see a typo in a post that in the command window would've never let me find the sdk tools on my c drive. But after i retyped it i did it & a bunch of writing came up. Trying to figure out now how to flash the stock images to the xoom.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
at first, make sure you install android sdk correctly. then go to android sdk-folder in your computer, u will find a folder named platform-tool. Press shift+ right click on it, then choose open command window here. After that, type in "adb devices" or "fastboot devives" to check if your xoom is connected. If yes,you good to go. If no, check your android sdk installed process
After i type in abd devices it says list of devices attached but shows nothing..i did copy the sdk tools folder to the c drive like i was told.
@OP
If you can't do it yourself, getting somebody to help you (in person) is always an option. If you live in a major city, advertise on Craigslist or some equivalent. Offer $50 for debricking + some tutorial.
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
albundy2010 said:
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
Click to expand...
Click to collapse
That's good advice...no reason to re-lock. But get back to square one so that you're functional and then when you're ready to try again, do it the right way.
Again, good luck!
albundy2010 said:
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
Click to expand...
Click to collapse
Thanks a lot.I was able to unlock it then it rebooted & stopped at the Motorola screen then i started the 1st command: fastboot flash boot boot.img & it says waiting on device..but nothing happens so far.Should i move on to the next step or retry?
So for the past weeks I've been looking in to flashing PA ROM on my nexus 4 , Honestly I'm kind of nervous that I will end up Bricking it... its completely Stock ATM . I noticed a few people saying not to use a toolkit, but to me it seems a lot easier, even to get it back to stock if I needed to . So how many have used a toolkit ? Any Problems Major issues ?
Sent from my Nexus 4 using xda app-developers app
yes
Sent from my Nexus 4 using xda app-developers app
Did you use this one?
http://forum.xda-developers.com/showthread.php?t=1995688
Toolkits aren't bad it's when people use them but have no idea what it is doing that is bad.
Your phone goes into a bootloop then you don't know how to fix it. If you don't know the 6 partitions in the Google.imgs how to use adb or fastboot don't use a toolkit
Edit: http://forum.xda-developers.com/showthread.php?t=1469909
The Dangers of Tool Kits and One Click Root Methods + Mini Rant
Sent from my Nexus 4
g2uzer said:
Did you use this one?
http://forum.xda-developers.com/showthread.php?t=1995688
Click to expand...
Click to collapse
I used Mr Skip's and it worked really well, most important thing to get right is installing the drivers on your PC, I donated to him cause it has so many options and worked so well
Never have and never will. Once you learn fastboot it's too much fun playing in the command prompt lol.
spaceman860 said:
Toolkits aren't bad it's when people use them but have no idea what it is doing that is bad.
Your phone goes into a bootloop then you don't know how to fix it. If you don't know the 6 partitions in the Google.imgs how to use adb or fastboot don't use a toolkit
Edit: http://forum.xda-developers.com/showthread.php?t=1469909
The Dangers of Tool Kits and One Click Root Methods + Mini Rant
Sent from my Nexus 4
Click to expand...
Click to collapse
Yeah I have read about phone going in to bootloop and it seems like a easy fix from what I read, the only phone I have rooted was a g2x thru a kit, so yeah I'm mostly a noobie, I've done a lot of reading but I usually ask my friend to do it for me since he knows A LOT more than me , I seen him unlock,rooot a few phones with out kits,,but to me it seems a lot more steps and there for more chances of me messing something up, so the only possibility you have thru rootkit is your phone going to boot loop ?
I have read mrskip but seems that this one looks easier (I think so )
http://forum.xda-developers.com/showthread.php?t=1766475
g2uzer said:
Yeah I have read about phone going in to bootloop and it seems like a easy fix from what I read, the only phone I have rooted was a g2x thru a kit, so yeah I'm mostly a noobie, I've done a lot of reading but I usually ask my friend to do it for me since he knows A LOT more than me , I seen him unlock,rooot a few phones with out kits,,but to me it seems a lot more steps and there for more chances of me messing something up, so the only possibility you have thru rootkit is your phone going to boot loop ?
I have read mrskip but seems that this one looks easier (I think so )
http://forum.xda-developers.com/showthread.php?t=1766475
Click to expand...
Click to collapse
After you install the drivers its this simple
fastboot oem unlock
fastboot flash recovery recovery.img
Then flash the SU.zip in recovery
Done
Sent from my Nexus 4
spaceman860 said:
After you install the drivers its this simple
fastboot oem unlock
fastboot flash recovery recovery.img
Then flash the SU.zip in recovery
Done
Sent from my Nexus 4
Click to expand...
Click to collapse
i disagree with you..
instead of using "done", id use "profit" :silly:
spaceman860 said:
After you install the drivers its this simple
fastboot oem unlock
fastboot flash recovery recovery.img
Then flash the SU.zip in recovery
Done
Sent from my Nexus 4
Click to expand...
Click to collapse
Good i found this thread, ill get an n4 soon and just wanted to check things out. I am comfortable with fastboot, and ADB(done everything with one v).
So its like this right?
fastboot oem unlock (cant believe its this simple, you have to use an unlock token to unlock an HTC boot loader)
fastboot flash recovery recovery.img same with the one v
Root by flashing zip.
After that simply enjoy flashing. Am i right? Also, do you need to flash kernels while changing ROMs like on hTC phones?
Just read, someone mentioned that if you don't know the 6 partitions you better not flash. Which 6 partitions?
Sent from my One V using xda app-developers app
soham_sss said:
Good i found this thread, ill get an n4 soon and just wanted to check things out. I am comfortable with fastboot, and ADB(done everything with one v).
So its like this right?
fastboot oem unlock (cant believe its this simple, you have to use an unlock token to unlock an HTC boot loader)
fastboot flash recovery recovery.img same with the one v
Root by flashing zip.
After that simply enjoy flashing. Am i right? Also, do you need to flash kernels while changing ROMs like on hTC phones?
Just read, someone mentioned that if you don't know the 6 partitions you better not flash. Which 6 partitions?
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
yup, thats it. fastboot oem unlock, fastboot flash a custom recovery, flash a custom rom or the su binaries via your new custom recovery, then reboot and profit. you dont have to flash kernels since all custom roms include them. but, you can and should flash custom kernels to better your device
simms22 said:
yup, thats it. fastboot oem unlock, fastboot flash a custom recovery, flash a custom rom or the su binaries via your new custom recovery, then reboot and profit. you dont have to flash kernels since all custom roms include them. but, you can and should flash custom kernels to better your device
Click to expand...
Click to collapse
Is there a updated video doing it this method? ( not using any rootkit) I'm more of a visual learner
Can't seem to find one.
After unlocking every thing I know how to flash ROMs, just the unlocking is what got me nervous .
Thanks
Sent from my Nexus 4 using xda app-developers app
g2uzer said:
Is there a updated video doing it this method? ( not using any rootkit) I'm more of a visual learner
Can't seem to find one.
After unlocking every thing I know how to flash ROMs, just the unlocking is what got me nervous .
Thanks
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I'd like a video of this too.
Can you brick your phone while unlocking? Or just while flashing?
g2uzer said:
So for the past weeks I've been looking in to flashing PA ROM on my nexus 4 , Honestly I'm kind of nervous that I will end up Bricking it... its completely Stock ATM . I noticed a few people saying not to use a toolkit, but to me it seems a lot easier, even to get it back to stock if I needed to . So how many have used a toolkit ? Any Problems Major issues ?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
use the nexus 4 toolkit by msskip..
its the best one so far and very easy to use...and dont worry abt bricking..
post if any issues,,.
No toolkit. It's important to know how to use fastboot.
Sent from my Nexus 4 using Tapatalk 4 Beta
Unlocking the bootloader and rooting for new users
The only thing I've ever used toolkit for in the past is restoring my Nexus devices to a factory image and the only reason I did that is because I didn't care to figure out how to decompile those things. But yeah, just like others have said above it is extremely easy to root a nexus device. Since my N4 already has the bootloader unlocked I can't really give you a real video anyway so I will give you an very detailed instruction list.
Before you start, install the N4 drivers. More simply, you can download and install the clockworkmod universal adb drivers from kouch. Everything below assumes that drivers are installed and working.
1. Get your supplies - download a custom recovery (most these days prefer TWRP and for simplification, today, so will you) You will also need a superSU.zip which I will also provide below. You will notice that it is a bit old but it can be updated easily once you reboot back into android. Lastly, but most importantly you will need the fastboot interface which will be in the mini_adb.zip file that I have also provided on mediafire. Keep in mind that there are a lot of tools in that folder that could be useful for you at some point down the road but today all you need is fastboot.
Link to Team Win Recovery for mako
MediaFire link to Superuser.zip
Mediafire link to miniadb_inc.zip
2. Set up your environment - first you need to unzip miniadb_inc.zip and for the sake of making things easier take the folder inside of the same name and drop it into the root of your C: drive. Again, to make things easier, go ahead and drop the twrp.img into the miniadb_inc folder. If you don't follow these instructions exactly then my commands won't work as written.
3. Turn off your phone and boot into the bootloader. To do this, when the phone is off hold down the power, vol-up, and vol-down buttons simultaneously until the phone viabrates once. You should see a picture of an Android lying on it's back with it's front opened up and a big start button on top. Connect your phone and then set it aside for a moment and open command prompt on your PC. Input the following commands:
Code:
cd /
cd /miniadb_inc
this changes your active directory to the miniadb_inc folder. Next input this command:
Code:
fastboot oem unlock
this sends the command to your phone to unlock the bootloader. At this time you should look at your phone and see a prompt regarding unlocking the bootloader. Click accept to unlock the bootloader or if you're freaking out too much to continue at the moment you can click that you don't accept the terms and then click the power button and boot back into android and go about your day.
If you were bold enough to get to this point then you will now need to boot back into android anyway. Your phone will have reset and these instructions assume that you aren't flashing a custom ROM at this time so go ahead and take a minute to sign in and get things like you want them. While you're booted into Android take a moment to transfer superuser.zip to your SD partition on your phone. When you're done get back to the bootloader like you did earlier and input the following command:
Code:
fastboot flash recovery twrp.img
this command tells your computer to push the twrp recovery that you downloaded earlier to your phone and to flash it, effectively removing the stock recovery from your device.
4. Using the volume keys scroll through the bootloader options until you see recovery at the top of your phone and then click the power key to confirm. This will boot you into TWRP for the first time. Now select the install button in TWRP and then find the superuser.zip file that you put on your phone in the previous step.
5. Select the reboot button and your phone should reboot back into Android and will now be rooted! Update the su binary within the SuperSU app and update SuperSU through the Play Store like any other app. Congratulations, you're done!
6. Profit. :laugh:
sparkplugDev said:
The only thing I've ever used toolkit for in the past is restoring my Nexus devices to a factory image and the only reason I did that is because I didn't care to figure out how to decompile those things. But yeah, just like others have said above it is extremely easy to root a nexus device. Since my N4 already has the bootloader unlocked I can't really give you a real video anyway so I will give you an very detailed instruction list.
Before you start, install the N4 drivers. More simply, you can download and install the clockworkmod universal adb drivers from kouch. Everything below assumes that drivers are installed and working.
1. Get your supplies - download a custom recovery (most these days prefer TWRP and for simplification, today, so will you) You will also need a superSU.zip which I will also provide below. You will notice that it is a bit old but it can be updated easily once you reboot back into android. Lastly, but most importantly you will need the fastboot interface which will be in the mini_adb.zip file that I have also provided on mediafire. Keep in mind that there are a lot of tools in that folder that could be useful for you at some point down the road but today all you need is fastboot.
Link to Team Win Recovery for mako
MediaFire link to Superuser.zip
Mediafire link to miniadb_inc.zip
2. Set up your environment - first you need to unzip miniadb_inc.zip and for the sake of making things easier take the folder inside of the same name and drop it into the root of your C: drive. Again, to make things easier, go ahead and drop the twrp.img into the miniadb_inc folder. If you don't follow these instructions exactly then my commands won't work as written.
3. Turn off your phone and boot into the bootloader. To do this, when the phone is off hold down the power, vol-up, and vol-down buttons simultaneously until the phone viabrates once. You should see a picture of an Android lying on it's back with it's front opened up and a big start button on top. Connect your phone and then set it aside for a moment and open command prompt on your PC. Input the following commands:
Code:
cd /
cd /miniadb_inc
this changes your active directory to the miniadb_inc folder. Next input this command:
Code:
fastboot oem unlock
this sends the command to your phone to unlock the bootloader. At this time you should look at your phone and see a prompt regarding unlocking the bootloader. Click accept to unlock the bootloader or if you're freaking out too much to continue at the moment you can click that you don't accept the terms and then click the power button and boot back into android and go about your day.
If you were bold enough to get to this point then you will now need to boot back into android anyway. Your phone will have reset and these instructions assume that you aren't flashing a custom ROM at this time so go ahead and take a minute to sign in and get things like you want them. While you're booted into Android take a moment to transfer superuser.zip to your SD partition on your phone. When you're done get back to the bootloader like you did earlier and input the following command:
Code:
fastboot flash recovery twrp.img
this command tells your computer to push the twrp recovery that you downloaded earlier to your phone and to flash it, effectively removing the stock recovery from your device.
4. Using the volume keys scroll through the bootloader options until you see recovery at the top of your phone and then click the power key to confirm. This will boot you into TWRP for the first time. Now select the install button in TWRP and then find the superuser.zip file that you put on your phone in the previous step.
5. Select the reboot button and your phone should reboot back into Android and will now be rooted! Update the su binary within the SuperSU app and update SuperSU through the Play Store like any other app. Congratulations, you're done!
6. Profit. :laugh:
Click to expand...
Click to collapse
Thanks a lot ! When I get home I'm going to read this for the 3rd time .
So if I want to go back completely stock I can use a toolkit ?
Sent from my Nexus 4 using xda app-developers app
g2uzer said:
Thanks a lot ! When I get home I'm going to read this for the 3rd time .
So if I want to go back completely stock I can use a toolkit ?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Yeah, like I said, the toolkit makes it a lot easier to flash a factory image and frankly, I think it's safer. Less room for mistakes. The less you toy around with flashing the bootloader and the radio, the better chance you have of not bricking your device. Fortunately, when your bootloader is unlocked, as long as you aren't doing anything crazy, you will have a hard time bricking your device. If you have any further questions while you're working on it shoot me a PM and I will try to help. Good Luck!
sparkplugDev said:
The only thing I've ever used toolkit for in the past is restoring my Nexus devices to a factory image and the only reason I did that is because I didn't care to figure out how to decompile those things. But yeah, just like others have said above it is extremely easy to root a nexus device. Since my N4 already has the bootloader unlocked I can't really give you a real video anyway so I will give you an very detailed instruction list.
Before you start, install the N4 drivers. More simply, you can download and install the clockworkmod universal adb drivers from kouch. Everything below assumes that drivers are installed and working.
1. Get your supplies - download a custom recovery (most these days prefer TWRP and for simplification, today, so will you) You will also need a superSU.zip which I will also provide below. You will notice that it is a bit old but it can be updated easily once you reboot back into android. Lastly, but most importantly you will need the fastboot interface which will be in the mini_adb.zip file that I have also provided on mediafire. Keep in mind that there are a lot of tools in that folder that could be useful for you at some point down the road but today all you need is fastboot.
Link to Team Win Recovery for mako
MediaFire link to Superuser.zip
Mediafire link to miniadb_inc.zip
2. Set up your environment - first you need to unzip miniadb_inc.zip and for the sake of making things easier take the folder inside of the same name and drop it into the root of your C: drive. Again, to make things easier, go ahead and drop the twrp.img into the miniadb_inc folder. If you don't follow these instructions exactly then my commands won't work as written.
3. Turn off your phone and boot into the bootloader. To do this, when the phone is off hold down the power, vol-up, and vol-down buttons simultaneously until the phone viabrates once. You should see a picture of an Android lying on it's back with it's front opened up and a big start button on top. Connect your phone and then set it aside for a moment and open command prompt on your PC. Input the following commands:
Code:
cd /
cd /miniadb_inc
this changes your active directory to the miniadb_inc folder. Next input this command:
Code:
fastboot oem unlock
this sends the command to your phone to unlock the bootloader. At this time you should look at your phone and see a prompt regarding unlocking the bootloader. Click accept to unlock the bootloader or if you're freaking out too much to continue at the moment you can click that you don't accept the terms and then click the power button and boot back into android and go about your day.
If you were bold enough to get to this point then you will now need to boot back into android anyway. Your phone will have reset and these instructions assume that you aren't flashing a custom ROM at this time so go ahead and take a minute to sign in and get things like you want them. While you're booted into Android take a moment to transfer superuser.zip to your SD partition on your phone. When you're done get back to the bootloader like you did earlier and input the following command:
Code:
fastboot flash recovery twrp.img
this command tells your computer to push the twrp recovery that you downloaded earlier to your phone and to flash it, effectively removing the stock recovery from your device.
4. Using the volume keys scroll through the bootloader options until you see recovery at the top of your phone and then click the power key to confirm. This will boot you into TWRP for the first time. Now select the install button in TWRP and then find the superuser.zip file that you put on your phone in the previous step.
5. Select the reboot button and your phone should reboot back into Android and will now be rooted! Update the su binary within the SuperSU app and update SuperSU through the Play Store like any other app. Congratulations, you're done!
6. Profit. :laugh:
Click to expand...
Click to collapse
Superb, all this I know already as I did this with one v
But, I read in some tutorial that if you don't reboot to stock recovery and data reset your phone AFTER you've unlocked the boot loader, you will end up with a soft brick? Is it true?
Sent from my Nexus 4 using xda app-developers app
I've been playing g with androids for a long time and dozens of devices. Personally have never used a toolkit and its hard for me to recommend or knock them.
My view is a toolkit teaches you nothing
If a toolkit was made so was another method
Everyone will have an issue with something at some point, so the more you learn now the less freaking out latter
Learning to do thongs yourself will always be safer, I mean yes manually typing a dd command can be dangerous but if you know what you are doing you know when to be cautious, there will always be an example for either argument on this, but I truly can't see a reason to believe a tool kit is safer
But I'm a to each their own sorta guy, but also one who feels the need to learn as much as possible so will promote as much manually methods for anything in life and will do my best to stay away from auto-just-about-anything.... Just a my $.02
Sent from my Nexus 7 using xda premium
So i decided a few days ago to try and flash a factory image for kitkat on my N7. But i downloaded the image for the wrong device. the script has wiped recovery and system etc. The N7 now just boots to bootloader.
i got the proper factory image to flash, but i cannot get the device recognized on the pc running Windows 7 now. its showing as Other Devices / Android. I did install the drivers from the SDK and it now appears as Android ADB Interface. However ADB is still not recognizing it. I have done adb devices but nothing is found.
Any help, it is fixable isnt it??
You can't use adb commands in fastboot. You should use fastboot commands and flash the factory image
Sent from my Nexus 5
Tones1971 said:
So i decided a few days ago to try and flash a factory image for kitkat on my N7. But i downloaded the image for the wrong device. the script has wiped recovery and system etc. The N7 now just boots to bootloader.
i got the proper factory image to flash, but i cannot get the device recognized on the pc running Windows 7 now. its showing as Other Devices / Android. I did install the drivers from the SDK and it now appears as Android ADB Interface. However ADB is still not recognizing it. I have done adb devices but nothing is found.
Any help, it is fixable isnt it??
Click to expand...
Click to collapse
Well, I had a serious issue with something similar, after trying to update (not flash the factory image) to KitKat it produced an error and now it's bootlooping and, worse, my computer won't recognize the device, so I can't flash the factory image whatsoever. Your problem is much more light, as your computer is actually recognizing the device. What I'd suggest is using the Nexus Root Toolkit by WugFresh. Yes, I know, a lot of people here don't like using it but it's extremely useful when you have drivers issues.
It's actually a pretty straight forward procedure, you install the toolkit and it will ask you for your device model, android version, etc., then take you through the process of updates and stuff. Then, on the main window, you have this wizard "Full Driver Installation Guide" that will give you 4 ways to get your device working. You can find the Toolkit here: http://www.wugfresh.com/nrt/. Good luck!
I vote we ban all talk of toolkits. 99.9% of the help threads around here start with, "I was using/used x toolkit and now my device won't boot."
What happened to people learning about their devices?
How about learning how to fix your problems, rather than compound them by not understanding what you are doing? How about if you don't have the capacity to learn it, you leave it the F alone?
Sent from my Nexus 5
Pirateghost said:
I vote we ban all talk of toolkits. 99.9% of the help threads around here start with, "I was using/used x toolkit and now my device won't boot."
What happened to people learning about their devices?
How about learning how to fix your problems, rather than compound them by not understanding what you are doing? How about if you don't have the capacity to learn it, you leave it the F alone?
Sent from my Nexus 5
Click to expand...
Click to collapse
It's also difficult when trying to assist somebody... they're using the vocabulary of toolkits (which I'm not familiar with)... and I'm going on about fastboot... which they don't understand. It's like there are now two different languages... TOOLKIT and FASTBOOT.
Makes it very difficult to assist people.
Maybe I should have a tinker with Wugfresh... if for no other reason than to at least get an insight into how these things work.
Rgrds,
Ged.
The concept of the toolkit is great. It's the implementation and use of it that is horrible.
I think a toolkit should walk you through the actual steps and force you to type in the commands. You select an option of what you want it to do, it tells you what to type step by step to achieve said goal, and checks that you don't type in the wrong thing for the option you selected.
Unfortunately I don't think there is a market for that when you can get everything 'one clicked' for you.
Sent from my Nexus 5
Pirateghost said:
The concept of the toolkit is great. It's the implementation and use of it that is horrible.
I think a toolkit should walk you through the actual steps and force you to type in the commands. You select an option of what you want it to do, it tells you what to type step by step to achieve said goal, and checks that you don't type in the wrong thing for the option you selected.
Unfortunately I don't think there is a market for that when you can get everything 'one clicked' for you.
Sent from my Nexus 5
Click to expand...
Click to collapse
So an edit box where you could be prompted to type in things like fastboot flash recovery recovery.img... interesting idea... sort of walks you through the process, but doesn't obsessively hold your hand, where you don't learn anything.
I suspect most people just have problems with drivers, because, let's face it, fastboot and ADB aren't exactly difficult to use... unless people have difficulty understanding command lines in these GUI driven days, where everything is a simple menu or button click away... kind of sad really.
Rgrds,
Ged.
GedBlake said:
So an edit box where you could be prompted to type in things like fastboot flash recovery recovery.img... interesting idea... sort of walks you through the process, but doesn't obsessively hold your hand, where you don't learn anything.
I suspect most people just have problems with drivers, because, let's face it, fastboot and ADB aren't exactly difficult to use... unless people have difficulty understanding command lines in these GUI driven days, where everything is a simple menu or button click away... kind of sad really.
Rgrds,
Ged.
Click to expand...
Click to collapse
Basically yeah.
I have a feeling a good portion of the hesitation comes from the command line being scary to most people.
Sent from my Nexus 5
In the tgz file you download there is a 'flash-all.bat' file that does everything for you. If you open it in notepad, you see exactly what it does and in what order.
Yes, drivers are probably the issue, they were for me at least. I ended up using NRT (wugs toolkit) to install drivers (and root later, but that's a new topic)
Code:
PATH=%PATH%;"%SYSTEMROOT%\System32"
fastboot oem unlock
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot flash bootloader bootloader-grouper-4.23.img
fastboot reboot-bootloader
ping -n 10 127.0.0.1 >nul
fastboot -w update image-nakasi-jwr66y.zip
echo Press any key to exit...
pause >nul
exit
This is a Google way to flash the factory image.
---------- Post added at 10:02 PM ---------- Previous post was at 09:59 PM ----------
Pirateghost said:
The concept of the toolkit is great. It's the implementation and use of it that is horrible.
I think a toolkit should walk you through the actual steps and force you to type in the commands. You select an option of what you want it to do, it tells you what to type step by step to achieve said goal, and checks that you don't type in the wrong thing for the option you selected.
Unfortunately I don't think there is a market for that when you can get everything 'one clicked' for you.
Sent from my Nexus 5
Click to expand...
Click to collapse
The idea is great, try writing it
I'm sure it'll be greeted with appreciation.
Tones1971 said:
So i decided a few days ago to try and flash a factory image for kitkat on my N7. But i downloaded the image for the wrong device. the script has wiped recovery and system etc. The N7 now just boots to bootloader.
i got the proper factory image to flash, but i cannot get the device recognized on the pc running Windows 7 now. its showing as Other Devices / Android. I did install the drivers from the SDK and it now appears as Android ADB Interface. However ADB is still not recognizing it. I have done adb devices but nothing is found.
Any help, it is fixable isnt it??
Click to expand...
Click to collapse
As long as you can still boot into bootloader mode, it is still fixable. Try reinstalling fastboot drivers.
Pirateghost said:
I vote we ban all talk of toolkits. 99.9% of the help threads around here start with, "I was using/used x toolkit and now my device won't boot."
What happened to people learning about their devices?
How about learning how to fix your problems, rather than compound them by not understanding what you are doing? How about if you don't have the capacity to learn it, you leave it the F alone?
Sent from my Nexus 5
Click to expand...
Click to collapse
Yeah, because that was really helpful to him. I didn't tell him to use the toolkit to flash, root, unlock, or anything of the sort. For drivers issues, I do recommend (and will continue to do so) using the toolkit when official drivers don't work, because it has helped me a lot in the past, but I haven't used it to flash anything.
Download the image for your device and extract it into a folder
Download the zip below and move the files into the folder you created above
http://forum.xda-developers.com/showthread.php?t=1484407
Switch device off. Hold volume down and turn it back on, so it's in fastboot mode
Plug device into computer
Run "flash-all.bat" in the system image folder you extracted first
Want to thank everybody for their replies. Have had a family emergency so havent had a chance to try any suggestions, but didnt want to just ignore the thread i started.
Hey XDA,
I think google may have just created a way to save any nonbootable bricked nexus with recovery access. Due to some N OTA failures, they just released a side-loadable OTA through recovery. This OTA is actually a full system image and from what I am reading it can be used to saved any bricked device that won't accept another sideloadable OTA. Here is the reddit post and the AP article on it.
https://www.reddit.com/r/Android/comments/4a0ox6/marshmallow_ota_hose_your_nexus_device_just_flash/
http://www.androidpolice.com/2016/0...t-bricking-some-devices-but-google-has-a-fix/
Good luck guys. I would love to see some success stories here if it works for you and if so, spread the word!
That explains why the OTA for the N preview was the same size as the image, and why after upgrading to March security release I didn't have to download a different OTA to get to N
So is this usable in all situations? If yes then should download it & store it safely
Interesting thing, can this update bypass factory reset protection?
iluvatrix said:
So is this usable in all situations? If yes then should download it & store it safely
Click to expand...
Click to collapse
I would assume this could be used in any situation where you have a paper wait. So say you're on marshmallow build and somehow things go wrong ,bootloader locked USB debugging not check ,with this ota you can still sideload but it will be an N build which is fine at least you'll have a working device that now you can revert back to your original build. So I'm keeping this as well. I really don't need to but its nice to have just in case. I normally keep my bootloader unlocked at all times anyways just in case things go haywire... Someone correct me if I'm not correct please. Have a nice weekend all?
---------- Post added at 11:01 AM ---------- Previous post was at 10:58 AM ----------
Displax said:
Interesting thing, can this update bypass factory reset protection?
Click to expand...
Click to collapse
Good question..
Displax said:
Interesting thing, can this update bypass factory reset protection?
Click to expand...
Click to collapse
Most likely not, because normally when receiving an OTA all of that remains intact but, I think it's worth a test.
This will NOT bypass factory reset protection. This is just an update.zip that is a signed "FULL" image rather than a "DIFFERENCE" image. That means that it just doesn't need to perform the verification step before proceeding to install the update.
There is also another "problem" with relying on these as the ultimate unbrick files, which is that if you happen to install some official build that is NEWER than N-pre1, then the recovery will refuse to "downgrade". So while it may be useful for now while nobody is running anything newer than N-pre1, it isn't a permanent solution.
This is a ligit Fix. Confirmed by me.
Only thing I did different was to use an app called "Nexus Root Toolkit v2.1.4"
Upon launching the app (and there was plenty of prep to get it going on my Windows Vista laptop-my Mini Mac had problems loading in VMWare as WIndows XP so it did not work for me on a Mac)
I clicked on the "Advanced Utilities" section and clicked the "Launch" Tab.
The Advanced Utilities has a section called "Sideload OTA Update", I then clicked on "Sideload Update" and followed the instructions.
It pretty much asked me to select the file location of the Google Patched Image file called "shamu-ota-2659757-073c33ae.zip" (which stays zipped-do not extract it).
Then I followed the instructions on the screen. It did take me several attempts to get right, but in the end it worked as stated... I was so tired of trying to get this work for the last 7 days that I got lazy and despirate and did not take the time to read the instructions on the Nexus Root Toolkit. I had already filled an insurance claim for this because I was sure I could not get this phone back from this problem.
The trickiest issue I had was getting to boot the device into "Recovery" "ADB Sideload" because when I switched it to ADB Sideload, it would stop seeing the device. This is obtained by Power Down, Press Power and Volume Down at the same time, this brings up the Boot menu. You have to use the volume keys up or down to select "Recovery" and press Power again to select it. After about 3 or 4 seconds you see the Dead android with the Red Exclamation Point. That is what you want. Next Press Power and Volume Up, quickly release both and Press the Volume up again. You will finally see the Recovery screen where you will find the "ADB Sideload" option. This missing tidbit I was able to find at the Motorola Nexus Support page.
So, Yes. this worked for me! ...and I am going to cancel that insurance claim after all. :good:
Thanks again to whoever posted this and Google for being man enough to make things right for all the people that got in too deep with this "N Preview" gone wrong.
flash4yish
Displax said:
Interesting thing, can this update bypass factory reset protection?
Click to expand...
Click to collapse
doitright said:
This will NOT bypass factory reset protection.
Click to expand...
Click to collapse
The first N preview apparently has a bug that will allow a user to bypass FRP (if they are on the first N preview)
http://www.androidpolice.com/2016/0...ory-reset-protection-workaround-on-android-n/
flash4yish said:
This is a ligit Fix. Confirmed by me.
Only thing I did different was to use an app called "Nexus Root Toolkit v2.1.4"
Upon launching the app (and there was plenty of prep to get it going on my Windows Vista laptop-my Mini Mac had problems loading in VMWare as WIndows XP so it did not work for me on a Mac)
I clicked on the "Advanced Utilities" section and clicked the "Launch" Tab.
The Advanced Utilities has a section called "Sideload OTA Update", I then clicked on "Sideload Update" and followed the instructions.
It pretty much asked me to select the file location of the Google Patched Image file called "shamu-ota-2659757-073c33ae.zip" (which stays zipped-do not extract it).
Then I followed the instructions on the screen. It did take me several attempts to get right, but in the end it worked as stated... I was so tired of trying to get this work for the last 7 days that I got lazy and despirate and did not take the time to read the instructions on the Nexus Root Toolkit. I had already filled an insurance claim for this because I was sure I could not get this phone back from this problem.
The trickiest issue I had was getting to boot the device into "Recovery" "ADB Sideload" because when I switched it to ADB Sideload, it would stop seeing the device. This is obtained by Power Down, Press Power and Volume Down at the same time, this brings up the Boot menu. You have to use the volume keys up or down to select "Recovery" and press Power again to select it. After about 3 or 4 seconds you see the Dead android with the Red Exclamation Point. That is what you want. Next Press Power and Volume Up, quickly release both and Press the Volume up again. You will finally see the Recovery screen where you will find the "ADB Sideload" option. This missing tidbit I was able to find at the Motorola Nexus Support page.
So, Yes. this worked for me! ...and I am going to cancel that insurance claim after all. :good:
Thanks again to whoever posted this and Google for being man enough to make things right for all the people that got in too deep with this "N Preview" gone wrong.
flash4yish
Click to expand...
Click to collapse
I'm glad to hear it worked for you
Works for me boss
Thanks for finding this one - one of my 6's was soft bricked ( could only get to fastboot or recovery etc. could not complete reg. boot after signing up for android beta program OTA ).
I was able to ADB sideload the system OTA as described without a hitch. All data / set-up on phone was intact and functional.
Just for the record this Nx6 was only bootloader unlocked - no other mods/changes prior to original Beta OTA.
:good::good:
mowgli762 said:
Thanks for finding this one - one of my 6's was soft bricked ( could only get to fastboot or recovery etc. could not complete reg. boot after signing up for android beta program OTA ).
I was able to ADB sideload the system OTA as described without a hitch. All data / set-up on phone was intact and functional.
Just for the record this Nx6 was only bootloader unlocked - no other mods/changes prior to original Beta OTA.
:good::good:
Click to expand...
Click to collapse
Why didn't you just flash the system.IMG if the bootloader was unlocked?
holeindalip said:
Why didn't you just flash the system.IMG if the bootloader was unlocked?
Click to expand...
Click to collapse
I could have but I don't have any experience with flashing system images and retaining my settings and data (removing the wipe command in the batch file if I remember correctly).
I was pleased just to be able to handle it as an OTA instead. When I'm working at/near my experience limits I try to take smaller chances. I know working with a alpha release is risky and I'll face the consequences at need. Must have been a considerable number of folks in the same boat as me for Google to have come up with a lower skill level solution (for the likes of me).
mowgli762 said:
I could have but I don't have any experience with flashing system images and retaining my settings and data (removing the wipe command in the batch file if I remember correctly).
I was pleased just to be able to handle it as an OTA instead. When I'm working at/near my experience limits I try to take smaller chances. I know working with a alpha release is risky and I'll face the consequences at need. Must have been a considerable number of folks in the same boat as me for Google to have come up with a lower skill level solution (for the likes of me).
Click to expand...
Click to collapse
Download the system image
Extract system.img
Fastboot flash system system.img
This will retain all data on phone
Your boot loader is unlocked so...
A. You used a toolkit and don't know the commands that the toolkit uses
B. You bought the phone used with an unlocked bootloader
Toolkits are for just ease of use if you already know the commands , because if you unlocked your bootloader manually this is a simple 5 minute fix if the factory image is already downloaded. sorry for the rant not trying to be rude, just enlightenment.
holeindalip said:
Download the system image
Extract system.img
Fastboot flash system system.img
This will retain all data on phone
Your boot loader is unlocked so...
A. You used a toolkit and don't know the commands that the toolkit uses
B. You bought the phone used with an unlocked bootloader
Toolkits are for just ease of use if you already know the commands , because if you unlocked your bootloader manually this is a simple 5 minute fix if the factory image is already downloaded. sorry for the rant not trying to be rude, just enlightenment.
Click to expand...
Click to collapse
Good - case specific information needs no apology - Diplomacy has never been alluded to as being in my skill set (too much glass in my house to throw stones).
Thanks for your interest and info.
TriguyRN said:
Hey XDA,
I think google may have just created a way to save any nonbootable bricked nexus with recovery access. Due to some N OTA failures, they just released a side-loadable OTA through recovery. This OTA is actually a full system image and from what I am reading it can be used to saved any bricked device that won't accept another sideloadable OTA. Here is the reddit post and the AP article on it.
https://www.reddit.com/r/Android/comments/4a0ox6/marshmallow_ota_hose_your_nexus_device_just_flash/
http://www.androidpolice.com/2016/0...t-bricking-some-devices-but-google-has-a-fix/
Good luck guys. I would love to see some success stories here if it works for you and if so, spread the word!
Click to expand...
Click to collapse
Man you are life saver i donno how to thank you
you saved my nexus 6p with this post , i sent my problem about 2 months ago in nexus 6p question and answer about my device which bricked while installing the ota update with looked bootloader and have tried everything to save it but noway you are the hero who saved it XD
(btw my device is nexus 6p and it worked )
i really appreciate your help and sharing your information
thanks
---------- Post added at 01:52 AM ---------- Previous post was at 01:46 AM ----------
flash4yish said:
This is a ligit Fix. Confirmed by me.
Only thing I did different was to use an app called "Nexus Root Toolkit v2.1.4"
Upon launching the app (and there was plenty of prep to get it going on my Windows Vista laptop-my Mini Mac had problems loading in VMWare as WIndows XP so it did not work for me on a Mac)
I clicked on the "Advanced Utilities" section and clicked the "Launch" Tab.
The Advanced Utilities has a section called "Sideload OTA Update", I then clicked on "Sideload Update" and followed the instructions.
It pretty much asked me to select the file location of the Google Patched Image file called "shamu-ota-2659757-073c33ae.zip" (which stays zipped-do not extract it).
Then I followed the instructions on the screen. It did take me several attempts to get right, but in the end it worked as stated... I was so tired of trying to get this work for the last 7 days that I got lazy and despirate and did not take the time to read the instructions on the Nexus Root Toolkit. I had already filled an insurance claim for this because I was sure I could not get this phone back from this problem.
The trickiest issue I had was getting to boot the device into "Recovery" "ADB Sideload" because when I switched it to ADB Sideload, it would stop seeing the device. This is obtained by Power Down, Press Power and Volume Down at the same time, this brings up the Boot menu. You have to use the volume keys up or down to select "Recovery" and press Power again to select it. After about 3 or 4 seconds you see the Dead android with the Red Exclamation Point. That is what you want. Next Press Power and Volume Up, quickly release both and Press the Volume up again. You will finally see the Recovery screen where you will find the "ADB Sideload" option. This missing tidbit I was able to find at the Motorola Nexus Support page.
So, Yes. this worked for me! ...and I am going to cancel that insurance claim after all. :good:
Thanks again to whoever posted this and Google for being man enough to make things right for all the people that got in too deep with this "N Preview" gone wrong.
flash4yish
Click to expand...
Click to collapse
thanks buddy for sharing your experience
i tried to sideload the ota file by sdk from stock recovery and apply ota from adb manually by command adb sideload (filename)
but it stopped at 89% , so i give shot to your way and it works fine by the toolkit so i have to thank you too .
atef79 said:
Man you are life saver i donno how to thank you
you saved my nexus 6p with this post , i sent my problem about 2 months ago in nexus 6p question and answer about my device which bricked while installing the ota update with looked bootloader and have tried everything to save it but noway you are the hero who saved it XD
(btw my device is nexus 6p and it worked )
i really appreciate your help and sharing your information
thanks
---------- Post added at 01:52 AM ---------- Previous post was at 01:46 AM ----------
thanks buddy for sharing your experience
i tried to sideload the ota file by sdk from stock recovery and apply ota from adb manually by command adb sideload (filename)
but it stopped at 89% , so i give shot to your way and it works fine by the toolkit so i have to thank you too .
Click to expand...
Click to collapse
The best way to thank me is sharing your experience and this thread to help people in need. Already put a smile on my face
TriguyRN said:
The best way to thank me is sharing your experience and this thread to help people in need. Already put a smile on my face
Click to expand...
Click to collapse
I already shared your post in my topic that I made in the Nexus 6p section to help all who bricked there devices with locked bootloader, and thx again .
This is my topic link
http://forum.xda-developers.com/nexus-6p/help/command-t3308390/post66086939#post66086939
just want to ask would this method work if the phone has not been authorized to a specific PC ?
iluvatrix said:
just want to ask would this method work if the phone has not been authorized to a specific PC ?
Click to expand...
Click to collapse
I'm not sure what you mean by "if the phone has not been authorized to a specific PC". As far as I am aware Android phones are not authorized to a PC, that is an Apple thing...