Database Users

[Q] Problem: Clean phone, no radio, no roms, hspl2.08

Hello guys!
I don't know what to do anymore...
I used to have wm6.5 Hyperdroid1.7(sd) dualboot, but it began to freeze very often to the point where i could't boot it anymore. Since I had hspl2.08 allready installed, I decided to give the relatively new TyphooN CyanogenMod 7 v2.5.2
(http://forum.xda-developers.com/showthread.php?t=933951)
a try.
Long story short, I had lots of problems with the connection but finally made it to
task29: done (used doloops exe)
radio: 2.15.50.14 done
magldr: 1.13 done
ClockworkMod Recovery v1.3 135M System/44M Cache:
installed with DAF.exe
but when I selected 'AD recovery' in magldr it came up with the
1FATAL HIT 1 error. (worked one time when I left the battery out for 25 min, but never again)
So I decided to do everything over again, task29 etc ....
Some problems occured where I had to plug out the phone because it got
stuck in flashing process of task29/radio/magldr.
And now, nothing works, I can flash radio and magldr, but it does'n seem to affect anything. When I boot I just see just the white htc screen.
Tried to flash stock HTC-wm6.5-rom (with both bootloaders) but it gets stuck @ 8% and gives the wrong comand error.
So please help me, 2 days without a phone (so far ...)
daniel

U UNPLUGGED IT!
Try a task29 .. just a task29 with a compatible radio
Once its done go into the bootloader.. if you get this far flash MAGLDR
If and once MAGLDR boots up then your good to go with Android NAND/SD or WP7

Okay,
I task29'ed it with the 2.15... radio and it seemed to work again.
But I flashed with a nand android and when I booted again:
Booting Android from NAND
ANDROID LOAD at numbers
yaffs2 part is /boot
Load zImage
Load initrd.gz
[K] .. numbers
Load done!
1EFATAL HIT 1
*stuck*
may be relevant:
when I flashed the android it did not reboot automatically.
so i pressed the red reset button on the back.

thedangeroiusd said:
Okay,
I task29'ed it with the 2.15... radio and it seemed to work again.
But I flashed with a nand android and when I booted again:
Booting Android from NAND
ANDROID LOAD at numbers
yaffs2 part is /boot
Load zImage
Load initrd.gz
[K] .. numbers
Load done!
1EFATAL HIT 1
*stuck*
may be relevant:
when I flashed the android it did not reboot automatically.
so i pressed the red reset button on the back.
Click to expand...
Click to collapse
That's an android nand issue..prob kernel related... since you used the DFT android flasher it should've restarted... either try again with the same rom or different rom OR use clockwork recovery... i personally use CWM recovery.. since it has more options like installing from zip and backup/restore entire nand build to the sdcard
also note magldr mass storage .. some people say it corrupts transfer so to safe use card reader just incase when transfering
Sent from my HTC HD2 using XDA App

Ok lets try this Remove your SD card Save only necessary files that you need to your computer. Next Format the SD card leave it out.
I would erase the task 29 and MAGLDR and partition and ROM files from your computer and reinstall (possible file corruption)
Do a Task 29
Install MAGLDR 1.13
Once you install MAGLDR let phone reboot and hold power button to boot into MAGLDR
Choose option 5 and load your partition
Next reboot into MAGLDR again and got to option 8 you will want to find wipe data/factory reset and also wipe dalvik cache.
Now if you are flashing via CWM you should have the build on the SD card so now is the time to put SD card back in and reboot into MAGLDR you can then flash the rom. If you are flashing DFT put card back in reboot phone and enter bootloader and flash DFT.
Hope you get it working please read carefully...pm if you are really stuck.
The ONLY thing you are going to flash via MAGLDR option five is your partition...Did you flash the radio via MAGLDR if so that may be your problem?
If that dont work try this:
Try and use a task29 tool provided here http://forum.xda-developers.com/show...3&postcount=19 . Extract it and run it properly ( with phone in bootloader mode ) and perform the task 29. Then flash a radio version which you can find it here http://forum.xda-developers.com/showthread.php?t=611787 . ( I suggest 2.15 )
My suggestion is to go to bootloader-tricoloured screen ( NOT Magldr ). Flash a good radio version and afterwards go back to tricoloured screen of the bootloader in order to flash a Windows Mobile ROM ( preferably a STOCK one ). Forget about NAND ROMs until you will be sure what your problem is.
PS : Read here for more information http://forum.xda-developers.com/showthread.php?t=609477

[Q] Is my phone bricked?

First thing is first :
Radio 2.12.50.02.2
aMAGLDR 1.11
CWM Recovery 3.0.0.5
SPL 2.0.8
I was flashing from a custom nand to Hyper Droid CM7 v1.0.3. Now that I boot my phone it goes through magldr like normal but loaded zimage, says: load done ...123456 GOGOGO
Then it boots up into CWM recovery.. I tried to install the zip from here and it formats the boot and the system like normal... then copy's all the files to system. The install completes like normal. Then I reboot and it goes right back into CWM recovery. I have tried to flash other roms.. but now my phone wont active sync with my computer. I can only mount it. Any help would be amazing at this point. I have been troubleshooting this brick for the past 5 hours..
Thanks in advance for any help

I'm assuming i will have to start from scratch with wm 6.1... if so how would i flash the os to the phone is my phone doesnt sync with wmdc?

Gunblade77 said:
First thing is first :
Radio 2.12.50.02.2
aMAGLDR 1.11
CWM Recovery 3.0.0.5
SPL 2.0.8
I was flashing from a custom nand to Hyper Droid CM7 v1.0.3. Now that I boot my phone it goes through magldr like normal but loaded zimage, says: load done ...123456 GOGOGO
Then it boots up into CWM recovery.. I tried to install the zip from here and it formats the boot and the system like normal... then copy's all the files to system. The install completes like normal. Then I reboot and it goes right back into CWM recovery. I have tried to flash other roms.. but now my phone wont active sync with my computer. I can only mount it. Any help would be amazing at this point. I have been troubleshooting this brick for the past 5 hours..
Thanks in advance for any help
Click to expand...
Click to collapse
Did you try to reflash Magldr again, CWM recovery, then Android Rom again?

would i be able to do that without my phone syncing with the comp?

I tried it and it booted to CWM recovery

Gunblade77 said:
would i be able to do that without my phone syncing with the comp?
Click to expand...
Click to collapse
Yes, u should flash magldr 1.13, not magldr 1.11 because it will give stuck at GoGoGo. U need to enter bootloader to flash magldr 1.13.
Edit:sorry my bad. 1.11 wont give u stuck at gogogo, but flash 1.13 this time.

Do you actually know what you're doing? Your phone is most certainly not bricked. WMDC is useless once you don't have WinMo on your phone. I think the problem is your radio. Download and flash the 2.15.50.14 radio. It's the newest one. Then flash away and it should work. If not, task 29, reflash MAGLDR and then flash your ROM from clockwork.
Sent from my HTC Vision using XDA App

Ok i got the new mglrd and radio.. now when you tell me to flash the rom from cwm.. you mean from zip right?

ok so I installed from zip and the phone booted up into CWM yet again. Telling me that it failed to find cache/recovery/command, cache/recovery/log.
Failed to find cache partition to mount to cache.
I did update the radio and mglrd like you said.

I had the same problem I task 29'd it then flashed the build via splash mode
Sent from my HTC HD2 using XDA App

Just do the following
Below was taken from Tyween "TyphooN CyanogenMod 7 RC2+ v2.8.0"
1. Task 29
2. Flash Radio(2.15 Recommended)
3. MAGLDR 1.13
4. ClockworkMod Recovery v1.3 135M System/44M Cache/Recovery v3.0.1.9
5. Install TyphooN CyanogenMod 7 .zip with CWM

What i would do is download a stock rom, it will probably come as a single .exe file. rename the extension from .exe to .7z (if you have 7zip, im sure u can name it to what ever archieve program u have) then extract it. find the signed.nbh file and extract that. Then rename LEOIMG.nbh and put on root of sd card. power off phone and while booting hold the volume down button and the power button till you get the bootloader screen... follow prompts and then you are back to a stock hd2

I got it running now thanks for all the help guys. I just flashed a stock rom and changed the radio.
Sent from my HTC HD2 using XDA App

i think its needed to have a 2gb partition for ur sd xard befare install a rom.. partiton ur sdcard with cwm..
Sent from my HTC HD2 using XDA Premium App

Gunblade77 said:
I got it running now thanks for all the help guys. I just flashed a stock rom and changed the radio.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA Premium App

try this:
1) ensure you have magldr 1.13 loaded
2) boot into CWM
3) Do a wipe
4) re-download the ROM zip file (you could have gotten it corrupted somehow on the download)
5) put it on your SD card, load up CWM, flash choose.zip and find your ROM
6) after the flash do another wipe on CWM
7) restart your phone and from magldr load android from nand
edit: lol nvm, apparently I didn't see there was a page 2. Good job on gettin it running

orangekid said:
try this:
1) ensure you have magldr 1.13 loaded
2) boot into CWM
3) Do a wipe
4) re-download the ROM zip file (you could have gotten it corrupted somehow on the download)
5) put it on your SD card, load up CWM, flash choose.zip and find your ROM
6) after the flash do another wipe on CWM
7) restart your phone and from magldr load android from nand
edit: lol nvm, apparently I didn't see there was a page 2. Good job on gettin it running
Click to expand...
Click to collapse
lol thank you this would have helped also

JohnnyVolcom5 said:
What i would do is download a stock rom, it will probably come as a single .exe file. rename the extension from .exe to .7z (if you have 7zip, im sure u can name it to what ever archieve program u have) then extract it. find the signed.nbh file and extract that. Then rename LEOIMG.nbh and put on root of sd card. power off phone and while booting hold the volume down button and the power button till you get the bootloader screen... follow prompts and then you are back to a stock hd2
Click to expand...
Click to collapse
you're really telling him to go back to full stock, with stock spl, that's not necessary, if he has hardspl already, he doesn't have to go thru that again, task 29 will remove all traces causing issues, so all he needs is task 29, radio 2.15.50.14, MGLDR, CWM with the proper partition, and flash desired rom from clockwork.

Help - NAND installation MGLDR

Hi guys
Im currently an SD user.
I want to install this via nand: http://forum.xda-developers.com/showthread.php?t=1250703
I used to use MGLDR etc, is there an easy way to install this? As i cannot find exact info. As there is stuff like CLK and clockwork recovery mod.
Can anynone provide me an easy installation method to do this?
I will really appreciated. I love Android, i dont think i want to boot via WM anymore, and im sure this will also increase the performance? Thanks!!

Have you even tried to look for everything yourself?
I mean, you should have looked for "what is cLK, MAGLDR and CWM?"After doing that little search you should have known that the easiest way to do it is through the NAND toolkit stickied in the NAND forum after (of course) choosing which bootloader you want to use

I would start here:
http://forum.xda-developers.com/showthread.php?t=1044830
If you get stuck on something, just ask and I'll see if I can help you out.

after install MGLDR 1.13, my HD2 Doesnt start
Hi,
After installing MGLDR 1.13 my HTC HD2 doesnt start, I have just the HTC screen(whit screnn with HTC in green), it's freeze no menu.... nothing at all, just the white HTC Screen
Can please some one help me

You need to install a rom... download a daf file rom for your hd2 on to your computer... unzip it... run the daf file... do all this your phone have to be plug in to your computer... in magldr... select USB flash... wait for it to say.... USB....USB. then run daf file that you just unzipped....
Or install clockwork mod recovery (install through USB flasher) with the right partition for the rom.... the rom have to be for magldr... the downloaded rom also have to be transfer to your SD... but into magldr... select ad recovery... then follow prompt... this is the best way to flash rom...
Sent from my LG-P999 using XDA App

neolan said:
Hi,
After installing MGLDR 1.13 my HTC HD2 doesnt start, I have just the HTC screen(whit screnn with HTC in green), it's freeze no menu.... nothing at all, just the white HTC Screen
Can please some one help me
Click to expand...
Click to collapse
Google or Search here how to flash HSLP to a version needed for this ROM. Be sure also having the right MAGDLR version installed after HSPL. (easier to change than SPL).
I recommend using CWM. (press long red button while booting - go 8. Recovery AD - mount USB - get .zip of ROM on SD and install from .zip)
I recommend you to make sure your SPL version and MAGLDR versions are right before continuing. Also a total wipe or SD formatting (just search here for the stickies) must be (optional) done.
The white screen comes from ? Just guess ? Did you install a ROM ?

If it were no rom flashed, it would stop at the magldr menu. If a phone goes straight to bootscreen after flashing magldr it means either the spl isn't 2.08.hspl or the radio isn't a 2.xx.50.
@neolan enter bootloader, set 2.08.hspl, re enter bootloader, flash radio 2.15.50, the phone will now start into magldr and you can proceed flashing cwm.

[Q] ClockworkMod Recovery problems

I'm a noob and getting really frustrated.
I Wipe (Type 29) my phone and reinstalled MAGLDR v1.13, Radio & HSPL 2.08 just fine with HD2 Android NAND Toolkit. I can't get CWM on my phone to save my life. When I go to AD Recovery it says "No boot source" and I don't know how to get it back so I can load a new ROM.
PLEASE HELP ME IF YOU CAN!!!!!!!!!!
Thank you very much in advance for your help.

you said youve flashed hspl, radio, and mag ... you made no mention of flashing a CWR. just as a rom has to be flashed to boot up ... so does CWR or else theres nothing to boot. im not trying to flame or insult ... sometimes we miss the small things in our hurry to get to the party! i truly hope its as simple as this :-D
go to usb flasher (i believe option 5 in magLDR) and flash the CWR. Then boot AD Recovery ...

That is strange the toolkit should have installed CWM, but it seems that it didn't. Your next option is to download CWM and install it manually. Just be sure that the flash.cfg is setup correctly for your phone and rom that you want to install. the latest version is 5026 and can be installed via usb from magldr.
You can get it here at the end of the second post.
http://forum.xda-developers.com/showthread.php?t=987531&page=98

[Q] HD2 stuck at boot: bricked?

Hi,
a friend gave me an HD2 which stopped booting about three months ago, when he tried to install android on it, without really knowing what he was doing.
I have a bit of experience in installing custom roms in some android devices (HTC Vision, Samsung P1000...), but I know nothing about HD2 or any windows phones.
This is what it says after switching on:
tinypic.com/r/2hywdp4/5
This is after switching on with windows key pressed:
tinypic.com/r/29y43fb/5
This is after switching on with volume key pressed:
tinypic.com/r/25i3f9c/5
[sorry I can't create links because I'm new to xda]
Is there a way to go back to a working status?
If I fix it, I'll earn some glory and a free beer.
The final aim would be to install a NAND android rom, preferably CM7 or similar.
Thanks a lot.

Correct me if i'm wrong guys, but this pic :
tinypic.com/r/25i3f9c/5
is the bootloader mod and it says that you have HSPL 2.08
In my opinion, you just have to flash back a windows 6.5 ROM and follow the whole process to get android (Flash MAGLDR, [....] , and flash a CM7 NANDROID Rom using the clockworkmod) refering to the tutorials in the NANDROID section.

Its not bricked. Just restart the process to install Android as jediL pointed out and you should be good to go. Check here for a detailed explanation on how.

Ok the pictures help a lot. From what I see the first picture is what you see when you boot a HD2 that has clk installed for the custom bootloader but does not have as Android ROM in memory to boot. This is the only reason you well ever see clk at all if you just power on a HD2 with clk installed.
The second pictures is clk trying to boot into recovery but is not able to. It probably either has some kind of problem booting the flashed version or it just does not have a custom recovery flashed to it. My bet is it does not have a custom recovery flashed to it. As most people have problems Glasgow.g a recovery after flashing clk if they are not using the HD2 NAND Toolkit.
The third picture is the the stock bootloader of the HD2 and yes it shows you have HSPL 2.08 installed so you are good with HSPL and do not need to flash HSPL 2.08 to your HD2.
Now to get you on to getting Android up and running. Seeing as you already have clk on your HD2 you do not need to flash it. You do need to flash a custom recovery and you can either check out the guide linked in my sig to flash it via fasboot comands manually or you can use the HD2 NAND Toolkit to flash it in a more automatic way, or to be more specific a more noob friendly way. There is a link to the toolkit in the guide linked in my sig.
You need to pick out what Android ROM you want to use and read the first few post by the ROM chef to see what partition size you need to have and use the Toolkit to repartition the NAND memory to that size. Next download the .zip file for the ROM, make sure you get the version that is for clk. Some ROMs have only one version though that works with MAGLDR and clk. Next copy the .zip to the root of your SD card and then power on your HD2 holding down the home button and your recovery will boot up. Then just find the option that says install from SD card and then select the ROM file and flash it.

I installed HD2 NAND Toolkit.
I executed the following operations:
- Wipe (Task29)
- cLK repartition (150mb)
- cLK install recovery
then I rebooted into CWM recovery and installed the HyperDroid rom.
Now I have a fully working CM7-based android phone!
Thanks a lot!