I downloaded the updated.rar & EX File Explorer to transfer the file. My questions are!
1. Is it compulsory to connect to PC to move the file to SDCard or through phone itself i can do this job?
2. Should i move the file to /sdcard/ location ? or inside this there are many sub folders like android, animgifs, appsettings, arm-logs, media, whatsapp, bstfolder etc........which sub folder should i put or direct /sdcard/?
guys pls help me out to resolve this issue
You need to install kies on your PC to receive phone's driver
Connect your phone to the PC
Open kies and wait until it has completed connecting to your phone
Download file update.zip and put it in SDcard not under any folder
Unplugged your phone and shut down it to open recovery mode
use volume up and down, home buttons to choose install update from SDcard, choose update.zip and wait 1s, now reboot your phone and now it's rooted
Sent from my GT-S5360 using xda app-developers app
no need to move via pc just use your phone
also don't put it inside any folder - just put it in sdcard root - /mnt/sdcard
why fix it if it ain't broken ?
outcaut just
nikufellow said:
no need to move via pc just use your phone
also don't put it inside any folder - just put it in sdcard root - /mnt/sdcard
why fix it if it ain't broken ?
Click to expand...
Click to collapse
Thank u very much for your quick rsponse........
to move the file, i've already download the ES File Explorer in my samsung, can i use this app to move the file or must connect to pc through skies for moving? pls clear this
Both are ok
Sent from my GT-S5360 using xda app-developers app
mohdmaz said:
Thank u very much for your quick rsponse........
to move the file, i've already download the ES File Explorer in my samsung, can i use this app to move the file or must connect to pc through skies for moving? pls clear this
Click to expand...
Click to collapse
Just use that app.. all you need to do is.. get that update.zip file to your sdcard.. keep it outside of folders..
you have copied songs , picture files to sdcard right?? same way do this.. either download update file from phone browser.. which will store in download folder.. then move it outside download folder or download it from PC and move it to phone by connecting usb cable or bluetooth or however you send files usually..... then reboot and flash it in stock recovery as instructed in root thread,...
flowered dardiro
Deadly. said:
Just use that app.. all you need to do is.. get that update.zip file to your sdcard.. keep it outside of folders..
you have copied songs , picture files to sdcard right?? same way do this.. either download update file from phone browser.. which will store in download folder.. then move it outside download folder or download it from PC and move it to phone by connecting usb cable or bluetooth or however you send files usually..... then reboot and flash it in stock recovery as instructed in root thread,...
Click to expand...
Click to collapse
dear Deadly
Thank you very much and appreciate your efforts
mohdmaz said:
dear Deadly
Thank you very much and appreciate your efforts
Click to expand...
Click to collapse
how do i make srue, my phone is rooted after installing the update.zip? I had instaleld Root Check app to know my was rooted, will this program give me the result or which program would you prefer?
Just check if superuser is installed
Phone Slow? go ------>HERE<------
Ubuntu phone OS announced
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what do u think share your thoughts --->HERE<---
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
--Sent from the future with a galaxy s4 like a freaking BAWS--
you have update.zip include superuser or Supersu and su file ?
If you do not have it this file, I suggest that I use.
mohdmaz said:
I downloaded the updated.rar & EX File Explorer to transfer the file. My questions are!
1. Is it compulsory to connect to PC to move the file to SDCard or through phone itself i can do this job?
2. Should i move the file to /sdcard/ location ? or inside this there are many sub folders like android, animgifs, appsettings, arm-logs, media, whatsapp, bstfolder etc........which sub folder should i put or direct /sdcard/?
guys pls help me out to resolve this issue
Click to expand...
Click to collapse
dude dont get confused just do this
*download update.zip http://forum.xda-developers.com/attachment.php?attachmentid=763088&d=1319722266
*put it in your sd card directly not in any folder
*switch off ur phone and reboot it holding vol up, power and home buttons together
*do clear data and cash there its important (use volume up down and home keys to navigate)
*now install updates fromsc card>update.zip>ok
OR
follow this video tutorial (i followed the same video while rooting my galaxy y)
http://www.youtube.com/watch?v=nyEolcQAUWs
mohdmaz said:
how do i make srue, my phone is rooted after installing the update.zip? I had instaleld Root Check app to know my was rooted, will this program give me the result or which program would you prefer?
Click to expand...
Click to collapse
no need just check if superuser app is installed in your app drawer
and be sure to update the su binary
Go here.. http://forum.xda-developers.com/showthread.php?t=2085390
And to check use the Root Checker Basic app..
Sent from my Galaxy Y GT-S5360. Press thanks if I helped you.
Related
yes u watch any flash web content first install flash lite 3.1 in phone memory then put flash .dll 6.0.82.0 in window driectory then open regserv .exe enter \WINDOWS\flash.dll click ok after few seconds u hear sound open again regserv .exe see massage sucseed know owerite flash .dll 7.0.70.0 in window directory apllay soft reset of phone try opera 8.65 this trick for smartphone and ppc both of them
Whhhaaaaaaa....?
run that by me one more time...
Step by step tutorial
Hi
It would be extremely helpful to have a step by step tutorial including sources for any files required.
Many thanks
andrew-in-woking
links, files, manual, plzzzz..
i attach the file this only trick that u view full flash web content like youtube google videos etc on opera 8.65 for both smartphone and ppc it work on flash 9 type content best use 3g or wi fi or edge if install flash already then firs remove it first install flash lite3.1 in phone memory know install flash player 7 in phone memory also soft reset ur phone rember both files should in phone momery
Is this only good for youtube as stated from the readme file?
Because if your answer is YES, then there is a better version of Opera and just Flash 3.1 CAB file that is only needed for youtube to work.
I have no ideia what you said about regserv.exe, but I installed flash lite 3.1, then flash 7, then opera 6.5 and this is all I got from my site:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is how my webpage looks like seen thru flash 7... not flash 8/lite.
LOL, I just noticed you only had 2 posts, so I just lost 1 hour making this work for nothing... But thats ok, this is how much I'd like to have flash lite 3 working on my Touch Dual...
If anyone else is still trying to decript his post...
Flash lite doesnt have a flash.dll file, only these:
- flashlite.dll
- flashResource.dll
- flashsnddec.dll
- flashviddec_on2_win32.dll
- flashviddec_sorenson_win32.dll
- IEActiveX.dll
- si_impl.dll
The regsvrCE.exe (Im not sure its even the file he said, because this has "CE" in the name) can be found inside this attachment:
http://forum.xda-developers.com/showpost.php?p=1273652&postcount=6
I still got nothing working other than flash 7, so... billapannu, would you like to clarify what you wrote or should you just stop smoking those kind of drugs?
okay i again tell u what should u do delete flash player7 from ur mobile
1. install flash player lite 3.1 in ur phone momery
2. open SPFLASH FILE
3. open window directory copy from SPFLASH FILE
4. copy all files in ur phone window directory only
5. copy flash. dll 6.0.82.0 in ur phone window directory
6. open regserv file from ur phone file explore write \WINDOWS\flash.dll click okay after few second u hear sound agin open regservfile u see message succssed
7. copy flash .dll 7.0.70.0 on phone window directory ask owerwrite click yes
8. soft resest ur phone
guys this process need best file explore so i post good file explorer
first download this and open
click menu go to tools click configuration click on files
once again i said i do all this trick on my htc s710 work very well GUYS THIS PROCESS NEED BRAIN NOT HOT TEMPER HEAD
Where are these files coming from originally?
billapannu said:
okay i again tell u what should u do delete flash player7 from ur mobile
1. install flash player lite 3.1 in ur phone momery
2. open SPFLASH FILE
3. open window directory copy from SPFLASH FILE
4. copy all files in ur phone window directory only
5. copy flash. dll 6.0.82.0 in ur phone window directory
6. open regserv file from ur phone file explore write \WINDOWS\flash.dll click okay after few second u hear sound agin open regservfile u see message succssed
7. copy flash .dll 7.0.70.0 on phone window directory ask owerwrite click yes
8. soft resest ur phone
guys this process need best file explore so i post good file explorer
first download this and open
click menu go to tools click configuration click on files
once again i said i do all this trick on my htc s710 work very well GUYS THIS PROCESS NEED BRAIN NOT HOT TEMPER HEAD
Click to expand...
Click to collapse
Hi, could you please confirm this works with other flash sites apart from youtube also?
Hi
.. Since i think the progress of connecting phone, put apk file on sd card, disconnecting phone, browsing phones sd card for the apk file for then to install it is annoying ..
So I've made a quick batch file to quickly drag and drop files to install
Lets get started.
1- Download the attached zip. Should look something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- Extract using your favourite extraction program or using windows explorer.
You should now have a folder like this one:
3- Thats actually it !
What you can do now is:
Put the apk file inside the folder "Android app installer" and run the "Drag and drop files here" file (remember the ".apk" suffix)
OR
the easier way is to right click on the "Drag and drop files here" file and choose Send to, then click Desktop (As shortcut). From there. you can, any time, just drag any apk file from any directory to the "Drag and drop files here" file. and it will install it directly.
BEFORE YOU GET STARTED YOU HAVE TO DO THIS:
1- Enable USB-Debugging on your phone
2- Connect your phone to your computer
Log:
-V 1.1 (Filename: "Android app installer v1.1.zip"):
Closes after you have installed file. doesnt ask for filename after installation.
-V 1.0 (Filename: "Android app installer.zip"):
Released
I have several batch files associated with .apk files (windows).
As an example, Installing an apk is as simple as right-clicking on the apk and choosing "install"
britoso said:
I have several batch files associated with .apk files (windows).
As an example, Installing an apk is as simple as right-clicking on the apk and choosing "install"
Click to expand...
Click to collapse
Cool. But well, this is me, sharing my piece of the gingerbread
Very cool! Thanks for the tip!
Thanz mate was really looking for something like this! Am new to android
Sent from my GT-I5800 using Tapatalk
Thanx! Was looking for something like this (newbie at Android). Excellent!
Thanks for this, What I do is put it in my dropbox, and install it from the dropbox app.
Instead of all that you can just use a app call Awesome Drop drop your apk onto the phone using a browser no wi-fi or usb connection needed just ur usual 3g connection and thats it boom you got you apk just on the app on the phone click on the apk nd install in seconds =]
Yo, thank you very much for this guide, you just made my month!! I was looking a way to do that for a long long time. The internet is full of lausy bad guides. I owe you one
Device not found
Hey guys,
How do I get my device to be found.
My phone shows that it is USB connected on debugging mode and all by the application doesn't seem to know that.
Anything I should do?
Thanks.
Nice! I missed WM6 because of this missing feature. thanks
Sent from my PC36100 using XDA App
gueyenono said:
Hey guys,
How do I get my device to be found.
My phone shows that it is USB connected on debugging mode and all by the application doesn't seem to know that.
Anything I should do?
Thanks.
Click to expand...
Click to collapse
The drivers are properly the problem
WOW man that is some work
Thanks
Or you could just download it strait to your phone and click it in the notification bar to install it haha nice program tho.
Sent from my PC36100 using XDA Premium App
very usefull program! thanks mate!
thanks its nice
XabdullahX said:
Hi
.. Since i think the progress of connecting phone, put apk file on sd card, disconnecting phone, browsing phones sd card for the apk file for then to install it is annoying ..
So I've made a quick batch file to quickly drag and drop files to install
Lets get started.
1- Download the attached zip. Should look something like this:
2- Extract using your favourite extraction program or using windows explorer.
You should now have a folder like this one:
3- Thats actually it !
What you can do now is:
Put the apk file inside the folder "Android app installer" and run the "Drag and drop files here" file (remember the ".apk" suffix)
OR
the easier way is to right click on the "Drag and drop files here" file and choose Send to, then click Desktop (As shortcut). From there. you can, any time, just drag any apk file from any directory to the "Drag and drop files here" file. and it will install it directly.
BEFORE YOU GET STARTED YOU HAVE TO DO THIS:
1- Enable USB-Debugging on your phone
2- Connect your phone to your computer
Log:
-V 1.1 (Filename: "Android app installer v1.1.zip"):
Closes after you have installed file. doesnt ask for filename after installation.
-V 1.0 (Filename: "Android app installer.zip"):
Released
Click to expand...
Click to collapse
Thank You OP :good:
Thread again open to request users.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before installation make backup in CWM. Everything what you are doing is at your own risk !
Results for my country - the result will be different for each country.
Without PFGPS - 2400 seconds Fixed - apply xda qfix
PFGPS FIX v2.0 :
- First start - 9 seconds - Fixed
- Second start (reconnection) - 2 seconds - Fixed
- Accuracy 3-7 meters
If you leave your country FIX automatically switches to to another best location .
It is not possible to create TWEAK for the whole world. Users can try and choose which version is best for him.
Version 2.0 has 6 different version (version A, B ,C, D, E, F) Earliest try each version and then select verion which was the best for you.
Download: http://www.multiupload.com/4S38925QR4
Extended support for Hungary & Bosnia and Herzegovina:http://www.multiupload.com/PHH5AZ2YN3
If you chage ROM need flash my FIX again!
How install: Download this pack extract PFGPS to computer find your coutry and copy your Country to SDcard and install via CWM. (Without formating any file only replace gps file)
This FIX is build from my Xperia project data and android-servers souce.
Original Samsung Galaxy ACE GPS backup here: http://www.multiupload.com/C7G7SNNKMZ
#Tweak ported and customized by PFittech
#credits AngelDeaths & anddevs & PFittech
Thanks
downloading now
gonna try after backing up my current rom
---------- Post added at 04:50 AM ---------- Previous post was at 03:55 AM ----------
May be you done mistske in making update zip cause in cwm installetion aborted for india.zip
any way i replaced file manually by root explorer and then after reboot i check maps and now it show location more speedyly than before so thanks
Hey PFittech,
i can confirm its working for the Netherlands. Every time i use nav program gps locks within 60sec, even after phone reboot. THNX!!, again another annoying thing got rid off.
I also got an error on installing from sdcard, so had to put the files manually at the right place. After this i had to reboot 2 times for changes to take effect.
Cheers and again THNX.
Does this work on CyanogenMod 7 ?
Poland.zip installetion aborted too
Ireland aborted.
Sent from my GT-S5830 using xda premium
I think it's something wrong with updater-script
Forever living in my Galaxy Ace using XDA App
ChaosChris said:
Does this work on CyanogenMod 7 ?
Click to expand...
Click to collapse
Yes working with cm7 i tested
helo czech abort instal cwm
pls
write full path for copy manual ? thx
nims11 said:
Thanks
downloading now
gonna try after backing up my current rom
---------- Post added at 04:50 AM ---------- Previous post was at 03:55 AM ----------
May be you done mistske in making update zip cause in cwm installetion aborted for india.zip
any way i replaced file manually by root explorer and then after reboot i check maps and now it show location more speedyly than before so thanks
Click to expand...
Click to collapse
can u please tell which files to be replaced and where exactly to be replaced using root explorer m too from india. plz help
dm08b002 said:
can u please tell which files to be replaced and where exactly to be replaced using root explorer m too from india. plz help
Click to expand...
Click to collapse
Extract your zip file then there is two folder
go in system folder there is anothrr two folder one bin and second etc
so copy file inside bin folder to your phones system/bin/ and change permission to rwxr-xr-x
and file inside etc folder copy to your phones system/etc/ and change permission to rw-r-r
then reboot
can someone confirm if this works for Galaxy ACE?. If not working I delete my post I need feedback.
For those who had problems of instalaton I verify script.
I confermed already though i conferm you again its working properly with ace
prob was in update script
so i put all files manually and working awesomely so thanks again
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
PFittech said:
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17576100&postcount=3
it is kernel of rom may it help to use its update script to you
and link of rom you asked
http://forum.xda-developers.com/showthread.php?t=1263292
PFittech said:
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
Click to expand...
Click to collapse
We usually use:
Code:
run_program("system/xbin/busybox" "mount" "/system")
for mounting /system .
And:
Code:
run_program("system/xbin/busybox" "unmount" "/system")
for unmounting /system .
This is also applied to /cache , /data , /sdcard and /sd-ext too !
work fast... thanks =)
For Brazil, it says Installation Aborted, but even replacing using the root explorer and setting up the permissions, my GPS still not locking up. It was working fine with the stock rom.
His update-binary must be problematic .
All files abort with status 0 .
Forever living in my Galaxy Ace using XDA App
for those who get this - Installation aborted. Your kernel does not support my script - amateur said. I'm sorry but I will not fix every file again. The second option is to Install here: @ nims11
Extract your zip file then there is two folder
go in system folder there is one folder anothrr two second bin and etc
Copy the file inside bin folder to your phone system / bin / and change permission to rwxr-xr-x
file and folder inside etc copy to your phone system / etc / and change permission to rw-rr
then reboot
my script works on Galaxy s1,s2 without problem . For Ace use instalatlion via root explorer. I wanted deleted this thread for ACE but someone wrote that it works via ROOT EXPLOLER.
So I was playing with Photosphere on my Nexus S, and a thought came in.
Samsung, or any other OEM's that make Android Camera, should work hard to bring 4.2 update to their Android Cameras.
Photosphere would be a standout/luring feature to promote their Android Cameras which are somewhat a new kind of product.
While Photosphere is still in beta and doesn't stitch very well, I think people still would like to try it out since it is something new and exciting.
Samsung, Nikon, you heard?
Hurry up before someone does it first.
jk0l said:
So I was playing with Photosphere on my Nexus S, and a thought came in.
Samsung, or any other OEM's that make Android Camera, should work hard to bring 4.2 update to their Android Cameras.
Photosphere would be a standout/luring feature to promote their Android Cameras which are somewhat a new kind of product.
While Photosphere is still in beta and doesn't stitch very well, I think people still would like to try it out since it is something new and exciting.
Click to expand...
Click to collapse
I´ve had Photosphere on my Galaxy Camera almost since the first day I bought it!! Look here: http://forum.xda-developers.com/showthread.php?t=2035555
robb13 said:
I´ve had Photosphere on my Galaxy Camera almost since the first day I bought it!! Look here: http://forum.xda-developers.com/showthread.php?t=2035555
Click to expand...
Click to collapse
Hi Robb
I followed your instructions and was able to download the App + Lib onto my PC and extracted the WinRar files.
I've copied them to my Galaxy Camera's Ext SD card and can copy them to the system directories.
But I'm not sure how to change permissions on the files.
Can you please explain how to do this? I'm a noob to Android.
Thanks.
I use photo sphere too on my galaxy camera and work fine.
So for your problem, you need to change right of the file like say on the link provide.
For doing that, you need a file explorer with admin right.
I use ES file explorer.
Once you install this file explorer, you need first to allow him to access to root, for that go to : Settings
Then on the boot you will found : Root settings
Enable everything there.
Then after enable the first one, you get a pop up inform you to agree to give right on Super SU. Do Yes and after agree to give right.
When done, go to your folder app and lib where you copy the file, found the file one by one and made a long push on the file for show a menu and choice option on bottom "Properties" that open a new windows.
There click on "change" button and enable everything in "Read" column and on user for "write" column then click "ok" and again "ok".
Do that for all files (5 if I remember well) and reboot the Camera.
You will got 2 new icon for camera and galery
Hope I'm clear ^^
David.
djudenne said:
I use photo sphere too on my galaxy camera and work fine.
So for your problem, you need to change right of the file like say on the link provide.
For doing that, you need a file explorer with admin right.
I use ES file explorer.
Once you install this file explorer, you need first to allow him to access to root, for that go to : Settings
Then on the boot you will found : Root settings
Enable everything there.
Then after enable the first one, you get a pop up inform you to agree to give right on Super SU. Do Yes and after agree to give right.
When done, go to your folder app and lib where you copy the file, found the file one by one and made a long push on the file for show a menu and choice option on bottom "Properties" that open a new windows.
There click on "change" button and enable everything in "Read" column and on user for "write" column then click "ok" and again "ok".
Do that for all files (5 if I remember well) and reboot the Camera.
You will got 2 new icon for camera and galery
Hope I'm clear ^^
David.
Click to expand...
Click to collapse
Thanks David.
I've downloaded ES File Explorer and am having difficulty copying the files to the system/app directory.
First I connect the SGC to my PC and after the files are extracted with WinRar I copied them to the Download folder on the Camera.
Then using ES File Explorer I navigate to the Download folder and tried to copy/paste the files to the System/app directory but it gave the message that copy "GoogleGallery.apk" failed? The Gmscore.apk was copied OK.
What am I doing wrong?
I'll recheck the Root settings but I think I did that right as I can access the Root directory in ES File Manager now.
BTW, could it be because my SGC is not Rooted?
Any help would be greatly appreciated.
Yes I think you need root your device for get right to change file in system/app folder or even right of file.
So first root your device, very easy for the moment due of Eqynox issue, uberNoobZA and cybriks on the forum confirm he can root with the tools from Chainfire.
You can read the full topic about root Galaxy Camera here :
http://forum.xda-developers.com/showthread.php?t=1995245
Or go to page 5 firectly if you want use the method from Chainfire where uberNoobZA and cybriks confirm it work
The link about how to use the Chainfire tools :
http://forum.xda-developers.com/showthread.php?t=2050297
This method should be the easy way compare to the one use Odin, so you should be able to use it, it's only an app you run and do eveything alone
So do it and then try again to copy file and change right and you probably can use Photo Sphere (I like this function ^__^)
David
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
took this one at work. Almost perfect.
Hi friends,
At last i have found a way to mount external storage as internal and vice versa for xperia sp jb 4.3(.205). For this, you just need to have init.d support in kernel so your system can run a script on each boot which will do the mount in background.
Requirements:
1. Root
2. ((1. Busybox ))
((2. Universal init.d ))
((3. Es File Explorer ))
3. The attached script named "swap"
4. Patience and cool brain
How to do:
1. Install busybox
2. Install universal init.d
3. Make a folder in your external storage named "0" and put all the files of your external storage into it
4. Make another folder in "0" and name it "xInternal". Cut your files from your internal storage into it( So now, you have all ur files of external storage in "0", and all your files of internal storage in the folder "xInternal" inside "0"
5. Download the zip and extract the script(swap) and place it in /system/etc/init.d (Go to your root of the device with any explorer, i used es file explorer, then go to system/ etc/ init.d and paste the script there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Set the permission of the all checked (-rwxrwxrwx)
7. Change the owner of the file to "system"
8. Change the group of the file to "sdcard_rw"
9. Reboot and Die!!! Becaue you need to cut all files from the folder "Android" inside "xInternal" and paste it in the "Android" folder inside "0"
(So you have the files of your previous inter storage/"Android" in the folder "Android" of your present internal storage{which is actually your external sd})
10. Enjoy!!!!!!!!!!!
Download script
Issues:
1. You will see in settings that your external storage is changed as the same size of internal storage but internal is same as it is. Dont worry. Just dont look at this bcz its showing wrong info. you can install file commander and see by yourself that the script works
2. Es file explorer will show you that your internal storage is replaced with your external storage, but at the place of external storage, you will just see obb. But its wrong also, dont worry
For your help:
Before using this script--
Internal storage: /storage/emulated/0 (size ex. 5 gb)
External storage: /storage/removable/sdcard1 (size ex. 16 gb)
After using this script--
Internal storage /storage/emulated/0 (size ex. 16 gb) [
External storage: /storage/removable/sdcard1 (size ex. 5 gb)
Proof:
Explanation:
The script mount and bind /mnt/shell/emulated with /storage/sdcard1, so u have a folder in sdcard 1 which names "0", if u go in /mnt/shell/emulated/, u will see 3 folder named "0", "legacy", "obb". You already created "0", and "obb" & "legacy" will be created automatically, so your /dev/block/vold/179.33(/storage/removable/sdcard1) will be mounted as /mnt/shell/emulated/ and you will get your sdcard1 space in your internal, means /storage/emulated/0/. And you will see all your files of sdcard1 in "0" bcz u have put those in in a folder names "0" in your sdcard1. tricky, huh???
And if you are using this and avoid annoying low internal space, just send me thanks by pressing thanks button and encourage me to make more useful things and tuts in future
Long time waiting for something like this but i must ask, is this working on xperia TX on 4.3? has anybody tried it on T also V?
script link not work . please give another link to download . tanx
script link is not working...
Can someone please reupload the script link?
Is the author here? Please,upload the script
Sent from my C5303 using XDA Premium 4 mobile app
work app2sd?
daniel090588 said:
Long time waiting for something like this but i must ask, is this working on xperia TX on 4.3? has anybody tried it on T also V?
Click to expand...
Click to collapse
Actually i dont have that device, you need to try following the steps and inform me if u face any problem, waiting for your reply
amir-kia said:
script link not work . please give another link to download . tanx
Click to expand...
Click to collapse
I have updated the link, please try to download now. and thanks for trying to download
vandiaz_sairavinz said:
work app2sd?
Click to expand...
Click to collapse
You have no need of apps2sd now, u can just follow my steps and use my script and it will exchange ur external and internal
amir-kia said:
script link not work . please give another link to download . tanx
Click to expand...
Click to collapse
Link updated, please try
notarious said:
Is the author here? Please,upload the script
Sent from my C5303 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Link updated, please try
meshramjatin said:
script link is not working...
Click to expand...
Click to collapse
Link updated, please try
omidz said:
Can someone please reupload the script link?
Click to expand...
Click to collapse
Link updated, please try
Can't be understand your Tutorial, please give me another tutorial with pictures
Sent from my C5302 using XDA Free mobile app
s0ur0v said:
Link updated, please try
Click to expand...
Click to collapse
Hi
I test this tetorial but after reboot and few second screen black and reboot
Read before you reply
Sanjay rao said:
Can't be understand your Tutorial, please give me another tutorial with pictures
Click to expand...
Click to collapse
can you please follow the whole explanation step by step:cyclops:
cause I think OP has written this after his success of that process, also there're good enough helpful snaps which will guide you as shadow:angel:
hope you'll success at your work.
Let people know how it's going on. :victory:
What to do if i wont success??!!
hi..
I wanna try this today but i want to know that if anything happen wrong then what to do?
i don't want to brick my phone..
so plz give a tutorial to Rollback also..
Ankit Gajera said:
hi..
I wanna try this today but i want to know that if anything happen wrong then what to do?
i don't want to brick my phone..
so plz give a tutorial to Rollback also..
Click to expand...
Click to collapse
I test this but not work for me and phone not stay on screen and reboot .
after this problem flash swap file by clean text in recovery and phone boot and without problem and remove swap file from init.d .
amir-kia said:
I test this but not work for me and phone not stay on screen and reboot .
after this problem flash swap file by clean text in recovery and phone boot and without problem and remove swap file from init.d .
Click to expand...
Click to collapse
Thanks..:good: